The depiction of valence electrons around the symbol of an element as dots is called an "Electron Dot Structure". Option B is the correct answer.
The Electron Dot Structure, also known as Lewis dot diagram, is a shorthand notation that represents the valence electrons of an atom as dots surrounding the atomic symbol.
The number of valence electrons is determined by the group number of the element in the periodic table. The Electron Dot Structure is used to predict the chemical bonding behavior of an element and to understand the basic properties of compounds formed from those elements.
To know more about the Electron Dot Structure, here
brainly.com/question/9840379
#SPJ4
How is the mass of the vaporized liquid determined in this experiment
The mass of the vaporized liquid can be determined by measuring the mass of the container before and after the vaporization process.
The difference in mass can be used to calculate the mass of the vaporized liquid. Vaporization is a type of phase transition in which a substance in its liquid state is converted into a gaseous state. During this process, molecules in the liquid state absorb enough energy to break the bonds that hold them together, allowing them to move freely in the gas phase.For example, if the container had a mass of 100 grams before the vaporization process, and had a mass of 90 grams after the vaporization process, then the mass of the vaporized liquid would be 10 grams.
learn more about vaporizationb refer:brainly.com/question/30078883
#SPJ4
what term is used to describe the substance that is totally consumed in a chemical reaction?
Answer:
limiting reagent is used to describe the substance that is totally consumed in a chemical reaction
in each reaction box, select the best reagent and conditions from each list.
The best reagent and conditions from each list :
1) AlCl₃ - CH₃Cl at room temperature
2) HNO₃ -H₂SO₄ at room temperature
3) Fuming HNO₃ -H₂SO₄ at 90-100 ⁰C heat .
Benzene will be converted to the toluene by the Friedel Craft Alkylation of the benzene . In this reaction the reagent AlCl₃ and the CH₃Cl is used .
Dinitritoluene will be prepared from the toluene by the Nitration . The reaction is uses the Electrophilic substitution mechanism . The reagents that used are HNO₃ and the H₂SO₄ at room temperature.
This reaction is the extended nitration of the toluene . The Further nitration is done in the extreme condition . The temperature of the reaction is increased to the 90- 100 ⁰ C.
To learn more about reagents here
https://brainly.com/question/28504619
#SPJ4
What is an Iron Ring used for in chemistry?
Answer:
A circular iron rod with a clamp for use on a ring stand.
Explanation:
An iron ring is a circular iron rod that has a clamp that can be used to mount it on a ring stand. The iron ring serves to hold glassware, such as a flask, so that the glassware will not tip over, and is usually employed when the glassware may need to be heated, such as a Bunsen burner that can be placed underneath.
A chain lying on the ground is 10 m long and its mass is 70 kg. How much work (in j) is required to raise one end of the chain to a height of 6 m? (use 9. 8 m/s2 for g. ).
The work required to raise one end of the chain to a height of 6 m is 2058 J.The work required to lift an object is given by the formula:
W = mgh
where W is the work done, m is the mass of the object, g is the acceleration due to gravity, and h is the height to which the object is lifted.
In this case, the mass of the chain is 70 kg, the height to which it is lifted is 6 m, and the acceleration due to gravity is 9.8 m/s^2. We need to find the work required to lift one end of the chain, which is half of the total chain, i.e., 5 m.
The mass of the half chain is:
m = (70 kg) / 2 = 35 kg
The work required to lift the half chain to a height of 6 m is:
W = mgh = (35 kg) x (9.8 m/s^2) x (6 m) = 2058 J
Therefore, the work required to raise one end of the chain to a height of 6 m is 2058 J.
Find more about work
brainly.com/question/28607417
#SPJ4
According to the department of transportation, hazardous materials are defined as a megerial that can pose an unreasonable risk to
According to the Department of Transportation (DOT), hazardous materials are defined as materials that can pose an unreasonable risk to health, safety, or property during transportation.
These materials can include explosives, flammable gases and liquids, toxic substances, radioactive materials, and more. The DOT has specific regulations in place for the transportation of these materials to ensure that they are handled and transported safely to minimize the risk of accidents or harm.
These regulations include:
Requirements for labeling, packaging, and transporting hazardous materials, as well as training for individuals involved in the transportation process.It is important to follow these regulations to prevent accidents and protect the health and safety of those involved in the transportation of hazardous materials.
Learn more about hazardous materials at: https://brainly.com/question/29232461
#SPJ11
in cold water climates, road crews salt the roads to lower the freezing point of water. how many grams of cacl2 should be added to 1000 l of water to lower its freezing point from 0.0 °c to –10.0 °c? the freezing point depression constant for water is 1.86 °c/m, and the density of water is 1.00 g/ml.
The grams of CaCl2 required to be added to 1000l of water to lower its freezing point from 0.0 °c to –10.0 °c is 0.29 kg.
How to calculate grams ?The quantity of solute dissociation in the solvent is measured by the van 't Hoff factor, or i. I = 1 applies to things like sugar that do not dissociate in water. I = 2 for solutes that totally split into two ions. For the purposes of this illustration, CaCl2 entirely splits into the ions Ca+2 and Cl-. Consequently, I = 2 T in this instance is equal to 10 °C.kg water = 1 kg water Equals density x volumeKf water is also 1.86 °C kg/mol.T = iKfm 10 = 2 x 1.86 °C kg/mol m = 2.69 MThe formula for molality is now molecular mass = grams of CaCl2/kg water.CaCl2 has a molar mass of 110.98 g/mol, Molar mass of CaCl2 is 110.98 g/molm= grams of CaCl2 / 0.110 × 12.69 = grams of CaCl2 /0.110×1Grams of CaCl2= 0.29 kgFor more information on freezing point kindly visit to
https://brainly.com/question/3121416
#SPJ1
draw the structure of the product formed when benzoic acid is treated with aqueous sodium hydroxide.
The sodium ion (Na+) is ionically bonded to the carboxylate group of benzoic acid, replacing the hydrogen ion (H+) in the carboxylic acid group
When benzoic acid is treated with aqueous sodium hydroxide, it undergoes a base-catalyzed reaction known as saponification. The products of this reaction are sodium benzoate and water. The balanced chemical equation for this reaction is:
C6H5COOH + NaOH → C6H5COONa + H2O
In this equation, NaOH is the sodium hydroxide and C6H5COOH is the benzoic acid. The product, C6H5COONa, is sodium benzoate, which is a white crystalline powder that is soluble in water.
The structure of sodium benzoate can be represented as follows:
O
||
-C-O-Na+
||
C
The sodium ion (Na+) is ionically bonded to the carboxylate group of benzoic acid, replacing the hydrogen ion (H+) in the carboxylic acid group. The resulting compound, sodium benzoate, is a salt that is more soluble in water than the original benzoic acid, which is sparingly soluble in water.
For such more questions on Aqueous
https://brainly.com/question/19587902
#SPJ4
Which group would generally have the lowest first ionization energy?A) Transition MetalsB) Alkali MetalsC) Noble GasesD) Alkaline Earth MetalsE) Halogens
Alkali metals exhibit the lowest first ionization energy.
Alkali metals are a group of elements. Their standard valence shell setup is ns1. Sodium (Na), Potassium (K), Rubidium (Rb), Cesium (Cs), Lithium (Li), Hydrogen (H), and Lithium are some of them (Cs).
The alkali metal with the lowest ionization energy is cesium.
What is ionization energy?Ionization energy is the energy required to remove an electron from a neutral atom or a positive ion. It is a measure of the tendency of an atom or ion to lose an electron and become a cation. The ionization energy is usually expressed in units of electron volts (eV) or kilojoules per mole (kJ/mol). The first ionization energy is the energy required to remove the outermost electron from an atom in its ground state, while the second ionization energy is the energy required to remove the second outermost electron, and so on. Generally, the ionization energy increases as we move across a period in the periodic table, and decreases as we move down a group. This is because as we move across a period, the effective nuclear charge increases, which makes it more difficult to remove an electron from the outermost shell.
To learn more about the ionization energy, click the given link ;
brainly.com/question/20658080
#SPJ4
The amount of energy required to remove an electron from an isolated atom or molecule is called: ________
The amount of energy required to remove an electron from an isolated atom or molecule is called: ionization energy.
Ionization energy is the amount of energy required to remove an electron from an atom or molecule in the gas phase, resulting in the formation of a positively charged ion.
In other words, it is the minimum energy required to remove an electron from the outermost shell (valence shell) of an atom or molecule.
The ionization energy is measured in units of joules per mole (J/mol) or electron volts (eV).
It is an important property of atoms and molecules, as it determines their chemical reactivity and ability to form chemical bonds. Atoms with low ionization energies tend to be more chemically reactive and are more likely to form chemical bonds with other atoms, while atoms with high ionization energies are less reactive and less likely to form chemical bonds.
Learn more about Ionization energy here: https://brainly.com/question/1445179
#SPJ4
What is the mass of 2.80 moles of H2O
The mass of 2.80 moles of H2O is approximately 50.441 grams.
What is a molar mass ?
Molar mass is the mass of one mole of a substance and is expressed in units of grams per mole (g/mol). It is calculated by summing the atomic masses of all the atoms in a molecule, and it is expressed in the same units as atomic mass, which is atomic mass units (amu).
The molar mass of water (H2O) is 18.01528 g/mol (2 hydrogen atoms with atomic mass 1.008 and 1 oxygen atom with atomic mass 15.999).
To find the mass of 2.80 moles of H2O, we can use the following formula:
mass = number of moles x molar mass
Plugging in the values, we get:
mass = 2.80 mol x 18.01528 g/mol
mass = 50.441 g
Therefore, the mass of 2.80 moles of H2O is approximately 50.441 grams.
Learn more about molar mass here : brainly.com/question/22503632
#SPJ1
In a region where there is a uniform electric field, the potential, v1, is 1. 3 v at position y1=26 cm. At position y2=28 cm , the potential, v2, is 3. 9 v. What is the potential at position y3=32 cm ?.
The magnitude of the y-component of the electric field in this region exists 1.3 V/cm.
What is meant by magnitude?The measurement or absolute value of an amount is known as a magnitude. Positive real numbers are used to express magnitudes. The size of some quantity is known as its magnitude, to put it simply.
A seismic event's magnitude is its numerical value. It is a particular value independent of the epicentre's location or direction.
One cannot have a negative magnitude. The part of the vector's length that lacks direction is its length (positive or negative). The values in the summation are squared in the formula and are therefore positive.
Since [tex]V_1[/tex] exists 1.3 V at position [tex]y_1[/tex] = 26 cm. At position [tex]y_2[/tex] = 28 cm, the potential, [tex]V_2[/tex], is 3.9 V
Let the equation be
[tex]$& E=\frac{V_2-V_1}{Y_2-Y_1} \\[/tex]
substitute the values in the above equation, we get
[tex]$& =\frac{3.9-1.3}{28-26} \\[/tex]
simplifying the equation, we get
[tex]$& =\frac{2.6}{2} \\[/tex]
= 1.3 V/cm
Therefore, the potential at position [tex]y_3[/tex] = 32 cm be 1.3 V/cm.
To learn more about magnitude refer to:
https://brainly.com/question/30337362
#SPJ4
All of the following pairs of ions are isoelectronic except which one?A) Al^3+ and N^3-B) Fe^2+ and Co^3+C) Fe^2+ and Mn^3+D) K^+ and Ca^2+E) Zn^2+ and Cu^+
Isoelectronic ions include O2, F, Na+, Mg2+, and Al3+.
Are Al3+ and Na+ isoelectronic?Despite the fact that Na+ and Al3+ have identical electron configurations, Al3+ has a smaller ionic radius than Na+. Reason: Compared to Na+, Al3+ has a larger effective nuclear charge on the outer shell electrons. Both Assertion and Reason are true, and Assertion's explanation by Reason is accurate.
N3 and Ne are they both electronic?Atoms with the same electronic configuration or equal numbers of electrons are referred to as isoelectronic species. N3-, O2-, F-, Ne, Na+, Mg2+, and Al3+, for instance, are a number of isoelectronic species.
To know more about Isoelectronic visit:-
https://brainly.com/question/24720764
#SPJ1
6.0 mol NaOH can form
3.0 mol Na3PO4 while 9.0 mole H3PO4
can form 9.0 mol Na3PO4. What mass of
Na3PO4 forms?
Na3PO4: 164 g/mol
A total of 1984 grams of Na3PO4 is formed
How to find the mass of Sodium phosphate that formsFirst we first need to calculate the number of moles of Na3PO4 that are formed from 6.0 mol NaOH and 9.0 mol H3PO4.
From 6.0 mol NaOH, 3.0 mol Na3PO4 can be formed.
And from 9.0 mol H3PO4, 9.0 mol Na3PO4 can be formed.
So, in total, 3.0 + 9.0 = 12.0 mol Na3PO4 are formed.
Next, we can multiply the number of moles by the molar mass of Na3PO4 to find the mass.
mass = number of moles * molar mass
= 12.0 mol * 164 g/mol
= 1984 g
Therefore, a total of 1984 grams of Na3PO4 is formed.
Learn more about mass here : brainly.com/question/86444
#SPJ1
Mutations occur at a rate of 1 per 1010 base pairs per generation. aureus has 2.8 × 106 base pairs in its genome. Therefore, approximately 0.0028 mutations will occur per cell in the population. At the end of 12 hours, how many mutations will be present in the population of S. aureus in the wound in your foot? What are the implications of this genetic diversity in the context of treating a possible infection?
After, after 12 hours, we would anticipate roughly 27 mutations to be present in the S. aureus population in your foot wound.
Part 1-
First, the size of the S. aureus population in the wound in your foot should be found. Let's assume that the population size is 1 million (1 x 10^6) cells.
The mutations estimated in one generation per cell are:
1 mutation per 10¹⁰base pairs
The base pairs in the genome of S. aureus are 2.8 x 10⁶
Therefore, the expected number of mutations per generation per cell is:
(2.8 x [tex]10^{6}[/tex]) / ([tex]10^{10}[/tex]) = 2.8 x [tex]10^{-4}[/tex] mutations per cell per generation
To estimate the number of mutations in the population which occur after 12 hours the number of generations that have passed needs to be known. The generation time of S. aureus is approximately 30 minutes, so the number of generations in 12 hrs (hours) will be:
12 hrs x (60 minutes/hr) / (30 minutes/generation)
= 24x4 equals 96 generations
In 96 generations the approximate number of mutations per cell is:
96 generations x 2.8 x [tex]10^{-4}[/tex] mutations per cell per generation
= 0.027 mutations per cell
If we multiply mutations per cell by the number of cells in the population, to know the total number of mutations in the population:
i.e.,0.027 mutations taking place per cell x 1 x 10⁶ cells gives 27 mutations
Therefore, after 12 hours, we can expect approximately 27 mutations to be present in the population of S. aureus inside the wound in your foot.
Estimatedly, 0.0028 mutations will take place per cell in the population. After the end of 12 hours, 0.0028 * 16,777,216 = 46,976 new mutations will exist.
Part 2-
The implications of this genetic diversity in the context of treating possible infections is that host genetic diversity is thought to reduce the possibility that the disease will widen in natural populations.
To know more about mutations,
brainly.com/question/14438201
#SP J4
All parts of the question.
HgO is the limiting reactant. Cl[tex]_2[/tex] is the excess reactant. The limiting reactant, also known as the limiting reagent.
What is limiting reactant?In a chemical reaction, the limiting reactant, also known as the limiting reagent, controls how much product is produced. Calculating the theoretical yield of such a reaction is achievable if the limiting reactant has been identified.
Because elements and compounds in a balanced chemical system react in accordance with their mole ratios, there must be a limiting reactant.
HgO + 2Cl[tex]_2[/tex] →HgCl[tex]_2[/tex] + Cl[tex]_2[/tex]O
moles of HgO =11.50/ 216.5=0.05moles
moles of Cl[tex]_2[/tex] =12.46/70.9=0.17moles
To find the limiting reactant, divide the moles by stoichiometry. HgO is the limiting reactant. Cl[tex]_2[/tex] is the excess reactant.
Therefore, HgO is the limiting reactant. Cl[tex]_2[/tex] is the excess reactant.
To know more about limiting reactant, here:
https://brainly.com/question/28945068
#SPJ1
What is the empirical formula for a compound with a molecular formula of C12H18N606?
Type the subscripts in the blanks
The empirical formula for a compound with a molecular formula of C₆H₉N₃O₃.
What is empirical formula?Empirical formula of a compound is defined as the simplest whole number ratio of atoms which are present in a compound.It does not make any mention of the arrangement of atoms or the number of atoms. The empirical formula gives information about the ratio of number of atoms which are present in a compound.
Molecular formula is determined from the empirical formula by dividing the molar mass of a compound by the empirical formula mass. The resultant which should be a whole number or very close to the whole number , then the subscripts are multiplied by the whole number to get the molecular formula.The mentioned empirical formula is obtained by dividing molecular formula by 2.The empirical formula is obtained as , molecular formula/2=C₁₂H₁₈N₆O₆/2=C₆H₉N₃O₃
Learn more about empirical formula,here:
https://brainly.com/question/14044066
#SPJ9
what does homogeneous mean
Homogeneous is a term used to describe a mixture or substance that is uniform in composition and properties throughout.
In other words, it is a mixture or substance that has the same appearance and consistency throughout its entirety. This is in contrast to a heterogeneous mixture or substance, which has different compositions and properties in different parts of the mixture or substance.
An example of a homogeneous mixture is a solution of salt and water, where the salt is uniformly distributed throughout the water. An example of a heterogeneous mixture is a bowl of cereal, where there are different types of cereal and pieces of fruit mixed together.
Homogeneous mixtures and substances are easier to work with in scientific experiments and industrial processes, as they have predictable and consistent properties.
To know more about Homogeneous here:
https://brainly.com/question/30583932#
#SPJ11
What alkaline earth metal is used in fireworks?
Alkaline earth metals which are used in fireworks are aluminium, antimony, calcium etc.
The alkaline earth metals are six compound components in bunch 2 of the periodic table. They are beryllium (Be), magnesium (Mg), calcium (Ca), strontium (Sr), barium (Ba), and radium (Ra). The components have very much like properties: they are gleaming, shimmering white, fairly responsive metals at standard temperature and pressure.Fundamentally, they (along with helium) share for all intents and purpose an external s-orbital which is full — that is, this orbital contains its full supplement of two electrons, which the basic earth metals promptly lose to frame cations with charge +2, and an oxidation condition of +2.
Helium itself is a noble gas and not an alkaline earth metal, however it is conjectured to have a few likenesses to beryllium when constrained into holding and has once in a while been recommended to have a place with group 2.
To know more about alkaline earth metals,visit here:
https://brainly.com/question/12835232
#SPJ4
as the temperature increases, does the reaction rate increase or decrease?
The reaction rate increases as the temperature increases.
What is a temperature?
Temperature is a measure of the average kinetic energy of the molecules in a substance, typically measured in units of degrees on the Celsius (°C) or Fahrenheit (°F) scale. It is a fundamental physical property that determines whether a substance is a solid, liquid, or gas. Temperature also affects the properties of a substance, such as its boiling and freezing points, the speed at which chemical reactions occur, and the density of a substance.
This is because as the temperature rises, the molecules gain more energy and move around faster, increasing the number of collisions between the reactant molecules. This increases the probability of successful collisions that lead to the formation of the desired product, resulting in an increase in reaction rate.
Therefore, reaction rate increases as the temperature increases.
To learn more about temperature from the link
https://brainly.com/question/11464844
#SPJ4
At what position(s) will electrophilic aromatic substitution occur for the following compound?bromobenzene
In bromobenzene, the bromine atom is an electron-withdrawing group that deactivates the ring towards electrophilic substitution reactions. However, since the bromine atom is ortho-para directing, it directs incoming electrophiles to the ortho and para positions relative to itself.
Therefore, electrophilic aromatic substitution can occur at either the ortho or para positions in bromobenzene, and the meta position is less favored due to the deactivating nature of the bromine atom.
The reaction could be summarized as follows:
+ E+ + HX
| |
Ar-Br + E+ → Ar-E + HBr
| |
+ E+ + HX
where Ar represents the aromatic ring, Br represents the bromine atom, E+ represents the electrophile, and HX represents the acid catalyst.
learn more about electrophilic here:
https://brainly.com/question/29454942
#SPJ4
metal and dirt are not considered contaminants to oil. t/f
The statement "Metal and dirt are not considered contaminants to oil" is false.
What is meant by metal?Chemical elements known as metals have a high thermal conductivity, are ductile, and have high electrical conductivity. Metals include gold, silver, magnesium, helium, and others. They contain both solids and gases, and they are exceedingly reactive.Contamination of oil is referred to as oil and dirt. There is an issue with oil pollution because it generates a chemical reaction in the oil. Depletion or oxidation are some of the reactions it produces.There are numerous opportunities for metals, oxides, and other contaminants to be present in motor oils. As a result, the lubrication of engine components performs less effectively, resulting in debris and friction.When newly produced, polished, or shattered, a material exhibits a glossy look and quite good electrical and thermal conductivity. This substance is called a metal. The majority of metals are malleable and ductile. The metallic link that exists between the atoms or molecules of the metal is what gives rise to these characteristics.To learn more about metal refer to:
https://brainly.com/question/24868523
#SPJ4
What is the appearance of 9,10-dihydroanthracene 9 10 α β succinic acid anhydride?
In its relatively pure form, (9,10-dihydroanthracene-9,10-succinic acid anhydride) is probably white and very crystalline.
What is the literature melting point of 9,10-dihydroanthracene 9 10 α β succinic anhydride?Anthracene is a polycyclic aromatic hydrocarbon that gives rise to the chemical molecule 9,10-dihydroanthracene. Dihydroanthracene has a number of isomers, although the most prevalent one is its 9,10 derivative.
This substance's CAS registry number is 5443-16-3 and it is also known as 9,10-dihydroanthracene-9,10-succinic acid anhydride. Even with this number, it may be challenging to locate physical information on this substance. Its melting point is 261-262 °C, and its molecular weight is 267.2861 g/mol.
In its relatively pure form, (9,10-dihydroanthracene-9,10-succinic acid anhydride) is probably white and very crystalline. Crystals without colour are produced after recrystallization; their melting point is 260–263 °C.
The remaining substance in the vial most likely ranges in hue from yellow-green to dark green and is primarily composed of 9,10-dihydroanthracene-9,10-succinic acid anhydride. It is coloured due to minute levels of oxidised anthracene.
To learn more about succinic acid anhydride refer to:
https://brainly.com/question/15719562
#SPJ4
In general, as activation energy increases, reaction rate _____.
A) goes down if the reaction is exothermic.
B) goes down if the reaction is endothermic.
C) stays the same regardless of whether the reaction is exothermic or endothermic.
D) goes down regardless of whether the reaction is exothermic or endothermic.
E) none of the above.
Reaction Rate:
The rate of a reaction shows how fast a reaction is completed. This can be affected by the temperature of the system, and some other factors including stirring, etc. These affect the rate of collision of the particles in the reaction mixture which also affects whether the particles will have good orientation.
In general, as activation energy increases, reaction rate D: "goes down regardless of whether the reaction is exothermic or endothermic".
The activation energy is the energy required to initiate a chemical reaction by breaking the bonds of the reactants. If the activation energy is high, fewer molecules will have enough kinetic energy to overcome this energy barrier, leading to a lower reaction rate. This is true for both exothermic and endothermic reactions. Therefore, as the activation energy increases, the reaction rate will decrease regardless of whether the reaction is exothermic or endothermic.
You can learn more about activation energy at
https://brainly.com/question/1380484
#SPJ4
what is the role of detergent, ethanol, and salt in the extraction process?
The use of detergent, ethanol, and salt in the extraction process can help to improve the efficiency and selectivity of the extraction process, depending on the specific requirements of the experiment or application.
Detergent can be used to break up cell membranes and other barriers that might prevent the desired molecules from being extracted. It can also help to solubilize hydrophobic molecules by forming micelles.
Ethanol can be used as a solvent to extract polar and non-polar compounds. It can also be used to precipitate certain molecules, such as nucleic acids, by disrupting the hydrogen bonding and hydrophobic interactions between molecules.
Salt can be used to disrupt the hydrogen bonding and hydrophobic interactions between molecules, and can also be used to increase the solubility of certain molecules. In addition, it can be used to create a salt gradient, which can be useful for separating molecules based on their size or charge using techniques such as dialysis or gel filtration chromatography.
Learn more about chromatography:
https://brainly.com/question/26491567
#SPJ4
Why is KNO3 ionic and covalent?
Potassium nitrate, KNO3 has both ionic and covalent bonds. Ionic bond due to the attraction between oppositely charged particles and covalent due to the presence of a double bond.
KNO₃ (potassium nitrate) consists of potassium (an alkali metal) and nitrogen and oxygen (which are both gases and "non-metals"). We have a molecule of potassium nitrate, KNO₃, it contains the cation K⁺ and the polyatomic anion NO³⁻. An ionic bond is one in which one or more valence electrons from one atom are completely transferred to another atom, forming two oppositely charged atoms or ions. A covalent bond is formed when electron pairs are shared by both atoms. Now the bond in potassium nitrate is ionic, resulting from the electrostatic attraction between the K⁺ and NO³⁻ ions. There is also a covalent bond that works in the nitrate anion. The usual Lewis structure shows a quaternized nitrogen (ie nitrogen with a formal positive charge), an N=O double bond, and a single covalent bond. So both ionic and covalent bonding between nitrogen and oxygen atoms in NO³⁻ exist.
To learn more about ionic bond, refer:
https://brainly.com/question/957239
#SPJ4
2. 100cm³ of 0. 05M tetraoxosulphate (VI) acid was placed in a flask and a small quantity of anhydrous sodium trioxocarbonate (IV) was added. The mixture was boiled to expel CO2, cooled and the volume restored by the addition of distilled water to 100cm³. 22cm³ of the solution then required 15cm³ of 0. 10M NaOH solution to neutralize it. What was the mass of sodium trioxocarbonate (IV) added?
The mass of sodium trioxocarbonate (IV) added is 0.106 g.
To find the mass of sodium trioxocarbonate (IV) added, we need to use the balanced chemical equation and the concept of molarity.
The balanced chemical equation for the reaction is:
H₂SO₄ + Na₂CO₃ → Na₂SO₄ + H₂O + CO₂From the question,
We know that the volume of tetraoxosulphate (VI) acid is 100 cm³ and its molarity is 0.05 M. We also know that the volume of NaOH solution required to neutralize the solution is 15 cm³ and its molarity is 0.10 M.1. Using the formula M₁V₁ = M₂V₂, where M₁ and V₁ are the molarity and volume of the first solution and M₂ and V₂ are the molarity and volume of the second solution, we can find the moles of NaOH required to neutralize the solution:
0.10 M × 15 cm³ = 0.05 M × V₂V₂ = 30 cm³
2. Since the balanced chemical equation shows that 1 mole of NaOH is required to neutralize 1 mole of H₂SO₄, we can use the same formula to find the moles of H₂SO₄ in the solution:
0.05 M × 100 cm³ = 0.10 M × V₂V₂ = 50 cm³
3. Since the volume of the solution after the addition of sodium trioxocarbonate (IV) is 100 cm³, the moles of H₂SO₄ that reacted with sodium trioxocarbonate (IV) is:
50 cm³ - 30 cm³ = 20 cm³Using the formula M₁V₁ = M₂V₂,
4. We can find the moles of sodium trioxocarbonate (IV) that reacted with H₂SO₄:0.05 M × 20 cm³ = 0.10 M × V₂V₂ = 10 cm³
Since the balanced chemical equation shows that 1 mole of Na₂CO₃ is required to react with 1 mole of H₂SO₄, the moles of Na₂CO₃ is equal to the moles of H₂SO₄:10 cm³ × 0.10 M = 1 × 10⁻³ moles of Na₂CO₃
5. To find the mass of sodium trioxocarbonate (IV) added, we can use the formula mass = moles × molar mass:The molar mass of Na₂CO₃ is 106 g/mol, so the mass of sodium trioxocarbonate (IV) added is:1 × 10⁻³ moles × 106 g/mol = 0.106 gTherefore, the mass of sodium trioxocarbonate (IV) added is 0.106 g.
Learn more about sodium trioxocarbonate at: https://brainly.com/question/19039594
#SPJ11
PLEASE HELP ---- S + 6 HNO3 --> H2SO4 + 6 NO2 + 2 H2O
In the above equation how many moles of water can be made when 85 moles of HNO3 are consumed?
2moles of H2O are made when 6moles of HNO3 are consumed
75 mole of HNO3 produces = [tex]\frac{2}{6}[/tex]× 75 ⇒ 25 moles of water
Limiting Reagent Method
The limiting reagent is the reactant that is completely used up in a reaction and thus determines when the reaction stops.
S + 6 HNO3 --> H2SO4 + 6 NO2 + 2 H2O
6 mole of HNO3 produces [tex]\frac{2}{6}[/tex] = 2 moles of H₂O
1 mole of HNO3 produces = mole of H₂O
∴ 75 mole of HNO3 produces = [tex]\frac{2}{6}[/tex] × 75 ⇒ 25 moles of water
herbivory in brassica plants can induce the production of defensive chemicals such as glucosinolates. for example, one effect of these chemicals is the inhibition of growth of caterpillars feeding on the plant. do a web search to learn more about glucosinolates and describe another way in which they can provide a defense for plants against being eaten. what function is?
The function is that these flora use a complicated protection system, called the mustard oil bomb, to do away with their enemies.
If plant tissues are wounded, glucosinolates and an enzyme called myrosinase come into contact, and, as a result, poisonous metabolites are shaped which deter maximum insects. The first line of protection in flora is an intact and impenetrable barrier composed of bark and a waxy cuticle. Both guard flora towards herbivores. Other variations towards herbivores consist of difficult shells, thorns (changed branches), and spines (changed leaves). Recent research have proven useful consequences of glucosinolates, consisting of regulatory features in inflammation, pressure response, section I metabolism, and antioxidant activities, in addition to direct antimicrobial properties.
To learn more about herbivores check the link below:
https://brainly.com/question/1048752
#SPJ4
Set up a graph x-y scatter plot showing the solubility curve of each salt (SEP 5). Hint: you have one graph with all four salts. The x-axis is your independent variable the y-axis is your dependent variable. Graph needs to be titled, axis labels for both x and y, and labels for each curve.
The solubility curve curve shows the way that solubility is plotted against temperature
How do we prepare the solubility curve?The question is incomplete but it has to do with the preparation of the solubility curve so I will talk about it.
To prepare the solubility curve, Plot the solubility of the solute in the solvent as a function of temperature. Typically, the solubility is plotted on the y-axis, and the temperature is plotted on the x-axis. Connect the points on the graph with a smooth curve to represent the solubility curve.
Learn more about solubility curve:https://brainly.com/question/14366471
#SPJ1