Answer:
what graph????????????????
When you are climbing a hill on a bike with different speeds, why does it seem like you are pedaling a lot to cover a short distance? What happens if you switch to a higher gear in hopes of not having to pedal as much?
It seems like your pedaling a lot because it takes more energy and is way slower than a regular road. It you switch to the higher gear it will make you go slower because it is made for going down hill or going high speeds and a lower gear will help you more cause its easier and it will make it go faster.
The reason why it seems you have to cover a short distance when pedaling up the hill is explained in Paragraph 2 below.
What will happen if you switch to a higher gear hoping you wouldn't pedal too much is explained in paragraph 3 below.
Bikes are usually configured in such a way that the mechanical advantage which is the ratio of output force to input force will increase when there is an increase in resistance like the question shows by climbing a hill.Now, since there is resistance from climbing the hill on the bike, it means that you must increase your effort by completing more revolutions since the bike tires itself would not complete that much revolutions required to counter the trade off distance.Finally, if you decide to switch to a higher gear it means it will become very difficult to pedal since you need power to do so.
Read more at; https://brainly.com/question/20124975
Please Help!!! If you want to cut a full sheet of plywood in half, which tool is the BEST to use?
Miter Saw
Jig Saw
Table Saw
Panel Saw
Answer: jig saw
Explanation:
Name at least 5 things should you check before powering up any circuit to ensure that the circuit will operate safely
What kind of analysis would be conducted to identify project costs?
A. competitive analysis
B. customer needs analysis
C. financial analysis
D. concept analysis
Answer: C. financial analysis
Explanation:
1. Which of the following system parts controls cool- ant flow through a radiator? (A) Fan (B) Radiator (C) Thermostat (D) Temperature sensor, (8) prevent (C) prevent (O) control Supercharge cussed. Tech more oxygen
who is ur face actor
Answer:
lOUIS
Explanation:
'Cause if one day you wake up, and find that you're missing me
And your heart starts to wonder where on this Earth I could be
Thinking maybe you'll come back here to the place that we'd meet
And you'll see me waiting for you, on the corner of the street
So I'm not moving
I'm not moving
I DIDNT MAKE THIS UP
Someone else did
Answer:
is it a song
sounds strong
Explanation:
LIKE FRLS DONT ANSWER!!!!!
Answer:
Ok I won't answer I promise
Consider steady, incompressible, laminar flow of a Newtonian fluid in an infinitely long round pipe annulus of inner radius Ri and outer radius Ro Ignore the effects of gravity. A constant negative pressure gradient _P/_x is applied in the x-direction, (∂P/∂x)=(P1-P2)/(x2-x1) where x1 and x2 are two arbitrary locations along the x-axis, and P1 and P2 are the pressures at those two locations. The pressure gradient may be caused by a pump and/or gravity. Note that we adopt a modified cylindricaloordinate system here with x instead of z for the axial component, namely, ( r, θ ,x) and (Ur, Uθ ,Ux) Derive an expression for the velocity field in the annular space in the pipe.
Answer:
is it multiple choice?
Explanation:
what type of steel would a motor vehicle body be manufactured from?
Answer:
Stainless steel
Explanation:
Hope I answered your question.
Someone asks you to clean the fish tank, even though you think it is disgusting work. In the spirit of cooperativeness,
you should
a. complain as loudly as possible
b. leave work immediately
c. complete the task as well as you can
d. order someone else to do it
Please select the best answer from the choices provided
А
B
D
Next
Mark this and retum
Save and Exit
Submit
Answer:
obviously the answer is C
Answer:
c. complete the task as well as you can
Explanation:
ME
And what you know about love
Answer:
Everything I got what you need
What is an engineer?
Answer within 2 hours please
(Simple question)
Answer:
Explanation: Engineers are professional practitioners of engineering who specialize in inventing, designing, building and testing machines, complex systems, gadgets and materials to fulfill functional objectives and requirements.
the stiffness, or tension of a spring is called what
Answer: sprung Weight
Explanation: Spring Rate. refers to the stiffness, or tension, of a spring. Sprung Weight. the weight of the parts that are supported by the springs and suspension systems.
Simply said, springs of one kind or another, such as coiled springs, air springs, and Belleville springs, sustain the sprung weight of a vehicle. As wheels drive over bumps, potholes, and other obstacles, unsprung weight rises and falls with them.
What the stiffness, or tension of a spring?The part of the vehicle's overall mass that is carried by the suspension, as well as in most applications roughly half of the suspension's weight. It is referred to as sprung mass (or sprung weight) in vehicles with suspensions like cars, motorcycles, or tanks.
Spring rate. Relates to the tension or stiffness of a spring. Lifted Weight. The mass of the components that the suspension and spring systems are designed to support.
Therefore, the stiffness, or tension of a spring is called what sprung Weight
Learn more about spring here:
https://brainly.com/question/14665968
#SPJ2
After replacing a vacuum booster, the brakes lock up on a road test. Technician A says there is air trapped inside the brake lines. Technician B says the power booster pushrod needs adjustment. Who is correct?
Answer:
Technician B
Explanation:
The brakes can lockup due to the following reasons
1) Overheating break systems
2) Use of wrong brake fluid
3) Broken or damaged drum brake backing plates, rotors, or calipers
4) A defective ABS part, or a defective parking mechanism or proportioning valve
5) Brake wheel cylinders, worn off
6) Misaligned power brake booster component
What is the answer to this question?
Which term correctly completes the following statement?
A three-dimensional object has a(n) _____ measurement recorded in _____ units.
volume, cubic
volume, square
area, cubic
area, square
Answer:
Explanation:
The correct term to complete the statement is:
A three-dimensional object has a(n) volume measurement recorded in cubic units.
Volume is a measure of the amount of space an object takes up in three dimensions, and is measured in cubic units (such as cubic centimeters, cubic meters, or cubic inches).
Area, on the other hand, is a measure of the amount of surface covered by an object in two dimensions, and is measured in square units (such as square centimeters, square meters, or square inches). Therefore, options B and C are incorrect.
Option D is also incorrect because area is not a measurement used to describe a three-dimensional object.
6V
4 Ω
4 Ω
what is the reading of the ammeter?
Answer:
6V
Explanation:
The ammeter is the what would make sense to your question
Which of the following is the scientific definition of the word acceleration as it is used in the text when
describing the principles of roller coaster physics?
O A.
a decrease in speed
B.
the rate of change in velocity
C.
progress in a forward direction
D.
the speed of an object in a particular direction
Air leakage tests are conducted by using a large fan to blow air into a structure.
True
False
How do you determine when a truss will fail?
(Yield Stress)
Answer:
If a truss buckles or overturns, it is usually because of the failure of an adjacent truss or its bracing. A steel truss in a fire may buckle and overturn because of expansion or weakening from the heat. Most truss failures are the result of broken connections. Photo 1 shows a set of parallel-chord wood trusses supporting a plywood floor deck.
Explanation:
Which of the following statements is NOT true?
Bits are binary digits. A bit can hold the value 0 or 1.
Binary math works just like decimal math, but each bit can have a value of only 0 or 1.
Where can water pollution occur?
A Lakes
B Rivers
C Groundwater
D All of the above
Answer:
I believe the answer is D all of the above. I hope this helps.
Select the correct answer.
Nick wants to cultivate some vegetables at his place. However, the soil is unsuitable for growing vegetables. If he has to cultivate vegetables
without using soll, which technique should he use?
O A greenhouse
OB. hydroponics
Oc vertical farming
OD. kitchen garden
Answer:
c
Explanation:
Answer:
Explanation:
b
And body that knows about welding can help identify what this is please!!!!!!!!!!!!!!
Answer:
Welding rod holder ?
Explanation:
to keep the rods dry
Explain why Chloe's design needs to be redone in the following scenario, and recommend the techniques she needs to include in her sketches.
Chloe has drawn a design of a new supermarket She has added all of her detail to one isometric sketch. The design was not done to scale, and the construction team is not sure how large the
building will be once it is complete.
Answer:
The correct answer includes that her sketch should also include an orthographic view. She also needs to incorporate ratios to proportions so the team will know the scale of the design. She can use customary units for her measurements, as well as an engineer’s scale and a computer program to assist her with the dimensions.
Answer:
The correct answer includes that her sketch should also include an orthographic view. She also needs to incorporate ratios to proportions so the team will know the scale of the design. She can use customary units for her measurements, as well as an engineer’s scale and a computer program to assist her with the dimensions.
Explanation:
What is the most likely cause a brake light staying on?
A blown fuse
B stuck brake light switch
C wrong fluid
D wrong brake light bulbs
How many 16ths are in 2 1/2