Answer:
Molecules always move from areas of high concentration to low concentration.
Explanation:
The correct answer to how diffusion works would be that molecules always move from areas of high concentration to low concentration.
Diffusion is generally defined as the movement of molecules - solid, liquid, or gases - from the region of higher concentration of the molecule to the region of lower concentration of the same molecule. The net movement of molecules continues until an equilibrium is established between the two sides.
6th grade science i mark as brainliest
Answer:
.......................................................
Explanation:
1-Convert the following to moles:
6.8 x 10^23 molecules of water
Answer:
1.1 mol H₂O
General Formulas and Concepts:
Chemistry
Avogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Dimensional AnalysisExplanation:
Step 1: Define
6.8 × 10²³ molecules H₂O
Step 2: Convert
[tex]6.8 \cdot 10^{23} \ mc \ H_2O(\frac{1 \ mol \ H_2O}{6.022 \cdot 10^{23} \ mc \ H_2O} )[/tex] = 1.12919 mol H₂O
Step 3: Check
We are given 2 sig figs. Follow sig fig rules.
1.12919 mol H₂O ≈ 1.1 mol H₂O
Answer:
Our final conversion is 1.1 moles of water.
Explanation:
When we want to find the amount of moles in a substance, we can use dimensional analysis or conversion factors in order to convert it from molecules, grams, atoms, formula units, or virtually any other unit.
We are given that we want to convert 6.8 x 10²³ molecules of water to moles. We can set up a dimensional analysis table to solve this.
In dimensional analysis, we multiply across the top and then divide the results by the multiplied value on the bottom.
[tex]\begin{tabular}{c|c}6.8 \times 10^{23} \ \text{molec. of water} & \text{1 mol H}_2 \text{O} \\ \cline{1-2} 1 & 6.022 \times 10^{23} \ \text{molec. of water} & \end{tabular}[/tex]
Now, we will perform our calculations and find our final answer.
[tex](6.8 \times 10^{23}) \times (1) = 6.8 \times 10^{23}[/tex]
[tex](1) \times (6.022 \times 10^{23}) = 6.022 \times 10^{23}[/tex]
[tex]\huge\frac{6.8 \times 10^{23}}{6.022 \times 10^{23}} = 1.129192959[/tex]
[tex]\text{Round to significant figures} \rightarrow 1.129192959 \approx 1.1[/tex]
Therefore, using our table, we have determined that our final answer is 1.1 moles of water.
[tex]\begin{tabular}{c|c}6.8 \times 10^{23} \ \text{molec. of water} & \text{1 mol H}_2 \text{O} \\ \cline{1-2} 1 & 6.022 \times 10^{23} \ \text{molec. of water} & \end{tabular} = 1.1 \text{moles of water}[/tex]
5. Water has a specific heat of about 4 J/Kg. It has a heat of fusion
of about 330 J/g. A 100-g ice cube is added to'a container with 400 g of room temperature (25°C) water. Is the final 500 g of water
A. below 0°C
B. slightly above 0°C
C. close to 25°C
D. near the middle of 0°C and 25°C
Answer:
The answer is slightly above 0°C.
Explanation:
The ice melts and absorbs 330 J/g × 100 g = 33000 joules.
Cooling 400 g of water from 25°C to 0°C requires
4 J/K-g × 400 g × 25°C = 40000 joules
The heat taken to melt is almost enough to cool the water all of the way to 0°C.
The answer is slightly above 0°C.
Jocelyn and her friends put some raisins, hazelnuts,
almonds, and peanuts in a bowl to make a snack for their
hiking trip. What does this snack represent?
A. a solution
B. a new element
C. a new compound
D. a mixture
plspslsspslpsl help its revision for exam and i need it quick brainliest for the right answer :D
Answer: D. a mixture
Explanation: When you mix different types of nuts or snacks together including raisins, hazelnuts, almonds, and peanuts to make some kind of trail mix, then you are creating a mixture, specifically a heterogeneous mixture.
What is molar mass of C7H6O2
Question: ¿What is molar mass of C7H6O2?
Answer: 122,12 g/mol
IamSugarBee
Do you notice a pattern in the charge for elements in each group? Explain.
(Hint: relate to number of valence electrons and the octet rule)
Answer:
Below are some patterns in the charge for elements in each group.
Group 1 elements : 1 valence electron and form ions with charge +1
Group 2 elements : 2 valence electrons and form ions with charge + 2
Group 3 elements : 3 valence electrons and form ions with charge + 3(there are some exceptions as well)
Elements in groups 4 and 5 are unpredictable also the D block elements consist of multiple oxidation states..
Group 6 elements : 6 valence electrons, form ions with charge -2
Group 7 elements: 7 valence electrons, form ions with charge -1
The octet rule is being followed, the elements form either ionic bond or covalent bond to fulfill it.
eg: when a K atom forms a K+ ion, the ion has the same electron configuration as the noble gas Ar (argon).
When an O atom gains 2 electrons to form the O²⁻ ion, the ion has the same electron configuration as the noble gas Ne (neon).
Note: Boron (B) is in Group 3 but doesn't form ions.
A noticeable pattern in the charge for elements in each group of the periodic table is that: Elements in the same group have the same charge.
Discussion:
The pattern in the charge for elements in each group is characterized by the adoption of the same charge for elements in the same group irrespective of the period they are situated in.
An example is evident in the alkali metal, halogen and alkali Earth metals group.
The alkali metals lose their only Valence electron, to assume the octet configuration of the preceeding noble gas.
Read more:
https://brainly.com/question/14252644
Ethanol is a:
A. substance
B. heterogeneous mixture
C. homogenous mixture
Answer: i think it is A
Explanation:
hope this helps!
Situation B would produce what kind of spectra?
Hot Gas
Cold Gas
help
Answer:
It would be C because its continuing to the next. It doesn't stop nor does it absorb anything.
Explanation: I hope this helps :) I'm only in 8th grade but this seems easy so if I am wrong I am soo sorry.
how do ions impact your life
Answer:
Increasing your concentration of negative ions is a very important way to improve your health for a variety of reasons. They work to increase serotonin levels in your body, which improves mood and balances your mental health, helping combat depression and anxiety.
Explanation:
Question 3 (10 points)
James is trying to calculate the wavelength of a wave. The frequency of the wave is 10 Hz and the speed of the wave is 50 m/s. What is the
wavelength? Show your work.
M
Frequency and wavelength are inversely proportional to each other. The wave with the greatest frequency has the shortest wavelength. Twice the frequency means one-half the wavelength. For this reason, the wavelength ratio is the inverse of the frequency ratio.
What is the molarity of a solution composed of 5.85 g of potassium iodide, KI, dissolved
in enough water to make 0.125 L of solution?
los afuso
Answer:
0.282 M
General Formulas and Concepts:
Chemistry - Solutions
Reading a Periodic TableUsing Dimensional AnalysisMolarity = moles of solute / liters of solutionExplanation:
Step 1: Define
5.85 g KI
0.125 L
Step 2: Identify Conversions
Molar Mass of K - 39.10 g/mol
Molar Mass of I - 126.90 g/mol
Molar Mass of KI - 39.10 + 126.90 = 166 g/mol
Step 3: Convert
[tex]5.85 \ g \ KI(\frac{1 \ mol \ KI}{166 \ g \ KI} )[/tex] = 0.035241 mol KI
Step 4: Find Molarity
M = 0.035241 mol KI / 0.125 L
M = 0.281928
Step 5: Check
We are given 3 sig figs. Follow sig fig rules and round.
0.281928 M ≈ 0.282 M
Compounds X has the formula C7H15Cl; Y is C7H15Br. X undergoes base-promoted E2 elimination to give a single alkene product Z. Y likewise reacts under similar conditions to give a single alkene product that is isomeric with Z Catalytic hydrogenation of Z affords 3-ethylpentane. X readily reacts in SN2 fashion with sodium iodide in acetone. Y does not undergo a similar SN2 reaction. Propose structures for X and Y.
Answer:
See explanation and image attached
Explanation:
Let us examine the statements in the question carefully. First of all, we will discover that the products of the E2 elimination of the both compounds are isomeric. However Y does not undergo SN2 reaction as X does.
The fact that SN2 reaction does not occur in Y confirms that the bromine atom is attached to a tertiary carbon atom and SN2 reaction does not occur due to steric hinderance. Since X undergoes SN2 reaction in aprotic solvent, the chlorine atom must be attached to a secondary carbon atom.
However, E2 reactions does occur with tertiary alkyl halides when strong bases such as OH^- or RO^- are used.
The question also stated that the catalytic hydrogenation of Z affords 3-ethylpentane.
Putting all these together, the structures of X and Y have been suggested in the image attached to this answer.
what did you learn in chemistry?
How does thermal energy transfer when a room is heated by a furnace?
a
Hot air is absorbed by the objects in the room; cold air expands and rises.
b
Hot air is circulated through the room; the hot air rises, and cold air falls.
c
Hot air makes direct physical contact with the objects in the room and rises.
d
Hot air is transmitted by electromagnetic waves; the hot air rises and falls.
Answer: D is the right answer pls make me brainliest
Explanation:
If you pour water into a hot metal pan, the water will absorb heat energy from the pan. Will the water come to the same temperature of the hot pan? What is the process? If you put the pan on the stove top, the stove top will heat both the pan and the water inside the pan, but it does not heat the two materials at the same rate
Answer:
Yes
Explanation:
It is heating up both
If you were going to draw a Lewis model of magnesium, how many valence electron dots would you do?
Screenshot very easy
Answer:
1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d⁶
Explanation:
Iron is soft, bright white metal.
Its symbol is Fe, atomic number is 26 and atomic mass is 55.85 amu.
It is present in group 8 of periodic table.
It is used to make the steel.
It is malleable and ductile used to make the sheets.
It is good conductor of heat and electricity because of moveable electrons that can easily move from one to another atom.
Its density is 7.87 g/cm³.
Electronic configuration:
Fe₂₃ = 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d⁶
Abbreviated electronic configuration:
Fe₂₃ = [Ar] 3d⁶4s²
SOMEONE PLS HELP ASAP IM DESPERATE
Answer:
Wave
Explanation:
Potassium chlorate (KClO3) decomposes in a reaction described by this chemical reaction:
2KCIO3( s) - 2KCI( s) + 302(g)
How does the reaction affect oxygen atoms?
A. The reaction changes 2 chlorine atoms into 2 oxygen atoms.
B. The reaction creates 3 oxygen atoms per formula unit of potassium chlorate.
C. The reaction changes their bonds, but neither creates nor destroys them.
D. The reaction creates 6 oxygen atoms per formula unit of potassium chlorate.
How to find valency?
Answer:
ork out which of the displacement (S), initial velocity (U), acceleration (A) and time (T) you have to solve for final velocity (V).
If you have U, A and T, use V = U + AT.
If you have S, U and T, use V = 2(S/T) - U.
If you have S, U and A, use V = SQRT(U2 + 2AS)
What happens to the temperature and density of the material between points B and C?
Answer:
Temperature decreases and density increases
Explanation:
Let us remember that density of a material increases as the temperature of the material decreases. So the cooler a material becomes, the denser it becomes also.
Between points B and C, the material rapidly cools down and the temperature decreases accordingly. This ultimately results in an increase in density since cooler materials are denser than hot materials.
In what way would one dozen elephants and one dozen doughnuts be different?
the word dozen and the number 12 that makes a dozen
Which process in the atmosphere is responsible for moving heat from warm equatorial regions to higher latitudes
Answer:
Heat transfer in the atmosphere from the equatorial regions to higher latitudes occurs through the process of Convection
Explanation:
The equatorial regions of the earth's surface receive the most heat from the sun than any other region of the earth. This is because the are most directly in line with the direct heat from the sun.
Due to this heat from the sun, atmospheric air around the equatorial regions are hot and less dense than air in regions of higher latitudes, and thus, rises above the equator. The rising air at the equator is replaced by colder and denser air from higher latitudes north and south of the equator. As the rising air of the equatorial regions are being replaced by colder and denser air from higher latitudes, the hot and humid air moves away from the equator, toward regions of higher latitude, north and south thereby setting up a convection current of heat flow.
What is the relationship between plastic and gasoline?
Answer:
Explanation:
Both plastic and gasoline are products of pretroleum
Chris the chemist was working in the and he wanted to sou what would happen he put copper chloride into a Bunsen flameAs soon as it the , began 10 amit a green color Which of these BEST describes this outcome
The question is incomplete, the complete question is;
Chris the Chemist was working in the lab, and he wanted to see what would happen if he put copper chloride into a Bunsen burner flame. As soon as he put it in the flame, it began to emit a green color. Which of these BEST describes this outcome?
A) The heat split the nucleus and created a new element.
B) As the copper chloride was heated, electrons were turned into neutrons.
C) As the electrons moved to a higher energy level, a photon of light is emitted.
D) When excited electrons return back to the ground state, a photon of light is emitted.
Answer:
D) When excited electrons return back to the ground state, a photon of light is emitted.
Explanation:
According to Bohr's model of the atom, electrons may absorb energy and move up to higher energy levels.
These electrons quickly return to ground state from such higher energy excited states thereby emitting the excess energy absorbed during excitation.
If the higher energy level is E2 and the ground state is E1 then the energy of the photon emitted when the electron descends from energy level E2 to E1 is;
ΔE = E2 - E1
This photon emitted accounts for the green colour of the copper salt observed when it was heated.
Describe and explain one real-life and/or recent example of how scientific knowledge had to change or adapt in the face of new discoveries.
OR
Describe and explain one old (i.e. not accepted anymore...) scientific model or theory. Then, explain why or how that old model had to change.
Answer: Science is a particular way of knowing about the world. In science, explanations are restricted to those that can be inferred from confirmable data—the results obtained through observations and experiments that can be substantiated by other scientists. Anything that can be observed or measured is amenable to scientific investigation. Explanations that cannot be based on empirical evidence are not a part of science.
Explanation:
Answer:
Modeling can help scientists study things that they can’t directly observe. Plesiosaurs no longer exist. So, scientists can’t directly see how they moved their flippers. However, they can use existing evidence—the fossil structures of plesiosaurs—to bring these organisms to life in a computer model.
Explanation:
Sample but you can reword
Please help I have been stuck on this for a long time.
* Lab question: How can you distinguish a physical change from a chemical change?
> Format: How can you distinguish A from B?
Answer! Comparison: physical changes vs. chemical changes
(PLSSS HEELP)Which landform is created by wind?
Delta
Desert gravel
Horns
Oxbow lake
100 POINTS!!! WILL MARK BRAINLIEST!!!
How do you find the moles per gram of an element?
Answer:
Explanation:
Start with the number of grams of each element, given in the problem.
Convert the mass of each element to moles using the molar mass from the periodic table.
Divide each mole value by the smallest number of moles calculated.
Round to the nearest whole number. This is the mole ratio of the elements and is.
Which phrase most accurately describes a chemical change?
Question 3 options:
A change on the molecular level.
A change in appearance.
A change in taste.
A change in form.
The phrase that most accurately describes a chemical change is; "A change on the molecular level."
The major difference between a physical change and a chemical change is that a chemical change involves a change in the composition of a substance.
This implies that the atoms in a substance are rearranged during a chemical change.
This rearrangement of atoms corresponds to change on a molecular level.
Learn more; https://brainly.com/question/6284546