Chemical substances that carry messages directly from one neuron to the next are called "Neurotransmitters." These chemical substances are important to our body.
What are Neurotransmitters?Neurotransmitters are one of the body’s chemical substances. Neurotransmitters directly transmit messages from one nerve cell to the following neuron, muscle, or gland cell across a distance. The axon terminal, a component of the neuron, is where neurotransmitters are located. They are kept inside synaptic vesicles, which have thin walls. Numerous thousands of neurotransmitter molecules can fit inside each vesicle.
As a message or signal moves along a nerve cell, the electrical charge of the signal provokes neurotransmitter vesicles to fuse with the nerve cell membrane at the cell's very edge. The axon terminal is then distributed into a liquid area between one nerve cell and the next target cell.
Here to learn more about Neurotransmitters:
https://brainly.com/question/26387085
#SPJ4
How do mixtures of gases affect the overall pressure?
The overall pressure of a mixture of gases is affected by the number of molecules and the kinetic energy of the individual gases present in the mixture.
The pressure of a mixture of gases is equal to the sum of the partial pressures of each individual gas. The partial pressure of a gas is the pressure that it would exert if it occupied the same volume of space alone.
For a mixture of ideal gases, the pressure is proportional to the number of molecules present, as well as the temperature. At constant temperature, an increase in the number of molecules of one of the gases in a mixture will lead to an increase in its partial pressure, which in turn will result in an increase in the overall pressure of the mixture.
To know more about mixture of gases click here:
https://brainly.com/question/28146408#
#SPJ11
which degrees of freedom are expected to contribute to the internal energy of a gas phase diatomic molecule at 298 k?
At high temperatures, a diatomic molecule possesses a total of six degrees of freedom.
Because a gas molecule may travel in any direction, it has three translational degrees of freedom. This is true for all gas molecules, whether monatomic, diatomic, or polyatomic, since every molecule in three-dimensional space may travel freely in all directions.
As a result, a diatomic molecule possesses five degrees of freedom: three translational and two translational.
As a result, a diatomic gas molecule possesses 6 degrees of freedom. This set may be divided into molecular translations, rotations, and vibrations. Three degrees of freedom are accounted for by the whole molecule's center of mass motion.
Learn more about diatomic molecule
https://brainly.com/question/11914539
#SPJ4
In liquid methanol, CH3OH, which intermolecular forces are present?
- Dispersion, hydrogen bonding and dipole-dipole forces are present.
-Only dispersion and dipole-dipole forces are present.
-Only dipole-dipole and ion-dipole forces are present
-Only hydrogen bonding forces are present.
Methanol molecules in liquid form experience dispersion forces, hydrogen bonding, and dipole-dipole forces.
Intermolecular forces are attractive forces between molecules. They play an important role in determining the physical properties of liquids and solids, such as boiling and melting points, viscosity, and surface tension.
In liquid methanol, CH3OH, the presence of three different intermolecular forces can be observed:
Dispersion forces: These are the weakest intermolecular forces and exist between all types of molecules. They arise from the fluctuations of electrons within a molecule, which creates temporary dipoles that attract nearby molecules.
Hydrogen bonding: Methanol molecules contain a hydrogen atom covalently bonded to an oxygen atom, making it possible for hydrogen bonds to form between methanol molecules. Hydrogen bonding is a stronger force compared to dispersion forces and is responsible for the high boiling point of methanol.
Dipole-dipole forces: Methanol is a polar molecule with a positive end (hydrogen) and a negative end (oxygen). When methanol molecules are close to each other, the positive end of one molecule will attract the negative end of another molecule, leading to dipole-dipole forces.
To know more Intermolecular forces here:
https://brainly.com/question/17111432#
#SPJ11
Do you think Sam Shepard was guilty? Explain your reasoning.
I believe that Sam Sheppard is guilty because of the amount of evidence against him
Who is Sam Sheppard?Sam Sheppard was an American physician who was convicted and later acquitted for the murder of his wife, Marilyn Reese Sheppard, in 1954. The case was widely covered by the media and has been the subject of numerous books and movies.
The verdict of the case was a subject of much controversy and legal debate, with some people believing that Sheppard was guilty and others believing that he was wrongly convicted.
Read more about Sam Sheppard here:
https://brainly.com/question/29461072
#SPJ1
How does the presence of kelp influence water oxygen levels?
what is knows as fool's Gold ?
Pyrite Mineral is known as fool's gold. It is the most common mineral mistaken for gold is pyrite.
What is PyritesPyrite is a metallic yellow crystals which when hit with steel which can be used to start a fire – but it has always been seen as worthless next to its coveted cousin. Real gold is a metal, fool's gold (Pyrite) is an iron sulfide mineral. While gold is very valuable, pyrite is worth virtually nothing
Oxidation of pyrite releases toxic metals and metalloids such as arsenic, a poisonous element.
Contact with strong acids will generate flammable and highly toxic hydrogen sulphide gas (H2S).
Learn more about pyrite here
https://brainly.com/question/3210662
#SPJ1
FILL IN THE BLANK. a hydrogen bond can form between the partially negative___ atom of one water molecule and the partially positive___ atom of another water molecule.
A hydrogen bond can form between the partially negative oxygen atom of one water molecule and the partially positive hydrogen atom of another water molecule.
Hydrogen bonding is a type of noncovalent bond that occurs between a hydrogen atom and a highly electronegative atom, such as nitrogen, oxygen, or fluorine. In water molecules, hydrogen bonding occurs between the partially negative oxygen atom of one molecule and the partially positive hydrogen atom of another molecule.
A hydrogen bond is stronger than a van der Waals interaction, but weaker than a covalent bond. The strength of hydrogen bonding in water is responsible for many of its unique properties, such as its high boiling point, high surface tension, and low vapor pressure. Hydrogen bonding also plays an important role in the stability of many biological molecules, such as proteins and nucleic acids.
In water, hydrogen bonds form a network of bonds between neighboring molecules, giving the molecule a highly ordered structure. This network of hydrogen bonds makes water a highly cohesive substance, which is important for many biological processes, such as the transport of nutrients and waste in plants and animals.
Learn more about hydrogen bonding here:
https://brainly.com/question/17659933
#SPJ4
The atomic number of fluorine is 9. Explain the formation of fluoride ion ?
The atomic number of fluorine is 9.the formation of fluoride ion is mentioned below.
What is atomic number ?
Chemical elements are grouped in the periodic system by increasing the amount of protons they contain, and each chemical element has a unique atomic number. As a result, the number of protons, which is always equal to the number of electrons in the neutral atom, is also the atomic number.
What is electrons ?
It is possible for an atom to have an attached or detached electron, a negatively charged subatomic particle (not bound). The electron, along with protons and neutrons, is one of the three main particle types found inside an atom. Atomic nuclei are composed of protons, neutrons, and electrons.
The electrical structure of a fluorine atom is 1s2 2s2 2p5. To get a stable octate or a noble gas configuration, one electron must therefore be removed. Therefore, the fluorine atom picks up an electron to transform into the flouride anion (F), which leads to a stable octate.
Therefore, atomic number of fluorine is 9.the formation of fluoride ion is mentioned above.
Learn more about atomic number from the given link.
https://brainly.com/question/11353462
#SPJ4
(b) What determines the polarity of a molecule?
the polarity of the individual bonds
the strength of the intramolecular forces
the orientation of the bonds with respect to one another
the polarity of the individual bonds as well as the orientation of the bonds with respect to one another
Answer:
The polarity of the individual bonds as well as the orientation of the bonds with respect to one another.
The average atomic mass of an element is 39.95 amu. What is the identity of the element? 1. Potassium 2. Yttrium 3. Argon 4. Calcium Enter the answer choice number.
Answer:
3. Argon
Explanation:
The average atomic mass of an element with a value of 39.95 amu is Argon (Ar). The answer choice number is 3.
(lab 13 graphing)
1. according to your graph, what is the relationship between pressure and volume?
2. on your graph, what is the volume of the gas at a pressure of 760 mm Hg?
The relationship between pressure and volume is inversely proportional.
In Boyle's Law the volume of a gas is inversely proportional to its pressure. In this graph, the volume and pressure are proportional to each other.
What is pressure and volume ?A contained gas will experience an increase in pressure when its volume is reduced, and a drop in pressure when its volume is increased. In reality, the pressure reduces by the same factor when the volume increases by a particular amount, and vice versa.
The balloon is inflated with air, which presses against the rubber and causes the balloon to expand. The un-squeezed portion of the balloon will expand outward if one end of the balloon is squeezed, reducing the volume and increasing the pressure inside.
Learn more about Pressure and volume here:
https://brainly.com/question/25736513
#SPJ4
what is the difference between controlled and uncontrolled redundancy
The difference between controlled and uncontrolled redundancy is with controlled redundancy, methods will be used to combine the data that is input automatically.
Redundancy refers to the duplicacy of data in the same database.
Controlled Redundancy: It will refers to sorting the redundancy as soon as the input is given.
Although the maximum platforms do not support controlled redundancy.
Redundancy will be controlled when the DBMS ensures that multiple copies of the same data are consistent. – For example, if new record with Student Number=10 is stored in the database, the DBMS will ensure that this stored in the database, the DBMS will ensure that this record is for Student jeorge.
Un-Controlled redundancy: It is an inconsistent state which cannot be controlled or sorted.
It is the most common occurring as well as realistic situation.
To know more about redundancy here
https://brainly.com/question/12972964
#SPJ4
5) is it possible to have a colony exhibiting ampicillin resistance and not fluorescence? explain your answer.
Yes, it is possible for a colony to exhibit ampicillin resistance but not fluorescence. This can occur due to differences in the mechanisms of antibiotic resistance and fluorescence.
Antibiotic resistance is a phenomenon in which bacteria become resistant to antibiotics that were previously effective in killing them. This occurs due to genetic mutations that alter the target site of the antibiotic or prevent the antibiotic from entering the bacterial cell. In the case of ampicillin, bacteria may become resistant by producing an enzyme called beta-lactamase, which cleaves the beta-lactam ring of the ampicillin molecule, rendering it inactive.
Fluorescence, on the other hand, is a property of some molecules to emit light when exposed to a specific wavelength of light. In the laboratory, fluorescence can be used as a diagnostic tool to identify bacterial colonies. Some bacteria contain fluorescent proteins that are naturally produced by the bacteria, while others can be genetically modified to express a fluorescent protein.
Therefore, it is possible for a colony to exhibit ampicillin resistance but not fluorescence if the resistance mechanism does not affect the ability of the bacteria to produce or express fluorescent proteins. Similarly, it is also possible for a colony to exhibit fluorescence but not ampicillin resistance if the mechanism responsible for fluorescence does not affect the target site of the antibiotic or the ability of the antibiotic to enter the bacterial cell.
Here you can learn more about antibiotic resistance
https://brainly.com/question/9565922#
#SPJ11
how many grams of sodium contain the same number of atoms as 11.1 g of potassium?
The atomic mass of potassium is 39.1 g/mol and the atomic mass of sodium is 22.99 g/mol.
What is the potassium ?Potassium is a vital mineral that is found in the human body. It is a key element for many important functions in our body, including regulating the heart rate and blood pressure, nerve transmission, and muscle contraction. It is also important for proper kidney function, as well as for maintaining the balance of electrolytes, enzymes, and hormones in the body. Potassium is found in many foods, such as fruits, vegetables, and dairy products.
To calculate the mass of sodium required to contain the same number of atoms as 11.1 g of potassium, divide 11.1 g by 39.1 g/mol and then multiply the result by 22.99 g/mol. This gives a result of 7.8 g of sodium.
To learn more about potassium
https://brainly.com/question/25380525
#SPJ4
A sample of a gas occupies 250 mL at 1.00 atm of pressure. If the pressure increases to 2.00 atm while the temperature stays the same, what is the new volume?
At 1.00 atm of pressure, a sample of a gas takes up 250 mL. The new volume will be 125 mL if the temperature remains constant and the pressure rises to 2.00 atm.
According to Boyle's law, a gas's volume changes inversely with pressure when the temperature is held constant.
The flowing gas molecules are spaced from one another at a specific distance. The volume decreases as the pressure rises because the molecules are forced closer together. Gases are liberated to travel in a bigger volume when the pressure is reduced.
Boyle's law can be mathematically represented using the following equation:
P × V = k, where k is constant.
To compare how a gas's conditions are changing, utilise Boyle's Law. If P₁ and V₁ are the beginning pressure and volume, respectively, and P₂ and V₂, respectively, are the ultimate pressure and volume, then Boyle's Law can be expressed mathematically as follows:
P₁ V₁ = P₂ V₂
Here, P₁ = 1 atm, V₁ = 250 mL, P₂ = 2 atm, V₂ = ?
Putting these values in the above equation,
1 × 250 = 2 × V₂
or, 2 V₂ = 250
or, V₂ = 125 mL.
Hence, the new volume is 125 mL.
To know more about Boyle's law from the link
brainly.com/question/1696010
#SPJ4
the chemical group that acts as an acid is the __________.
The chemical group that acts as an acid is the _carboxyl group (-COOH) The carboxyl group (COOH) is an example of a very hydrophilic group.
Because it may function as an acid and lose a proton to generate a negatively charged carboxylate ion (COO start superscript, minus, end superscript). Amino acids, fatty acids, and other macromolecules frequently include carboxyl groups.
This functional group can be found in compounds such as amino acids. This group serves as a foundation.
Acidic and basic functional groups are the two primary types of functional groups. Carbonyl, carboxyl, phenolic hydroxyl, and lactone groups are examples of surface acidic functional groups.
Any group in which a carbon or hydrogen atom is connected to the remainder of the molecule is abbreviated. Other elements such as halogens, oxygen, and nitrogen are sometimes included in a broader sense.
Learn more about chemical group
https://brainly.com/question/2854218
#SPJ4
The chemical group that acts as an acid is the Carboxyl group (-COOH).
A chemical group denotes a group of chemicals that share a common chemical structure and toxicological properties. A carboxyl group (COOH) is an example of a highly hydrophilic group.
Because it can act as an acid and donate protons to produce negatively charged carboxylations (COO starts with a superscript, ends with a minus, and ends with a superscript). Amino acids, fatty acids, and other macromolecules often contain Carboxyl group.
This functional group is found in compounds such as amino acids. This group acts as a basis.
Acid functional groups and basic functional groups are the two main types of functional groups. Carbonyl, carboxyl, phenolic hydroxyl and lactone groups are examples of acidic surface functional groups.
Groups in which a carbon or hydrogen atom is attached to the rest of the molecule are omitted. Other elements such as halogens, oxygen and nitrogen may also be broadly included.
For more information on Carboxyl group, visit :
https://brainly.com/question/6714408
#SPJ4
consider what would happen if you did not let the temperature of the flask reach equilibrium with the temperature of the water bath for the air vapor pressure measurement.
a. How would this affect Pvapor for the first pressure temperature data pair recorded?
b. How would this affect the slope of the line for the lnPvapor vs 1/T plot?
c. How would this affect your calculation of ΔHvap?
When measuring the vapour pressure of a chemical, it is critical to ensure that the temperature of the flask containing the substance has reached equilibrium with the temperature of the water bath in which it is put. If this is not done, the experiment's results may be influenced in a number of ways.
a. Effect on Pvapor: If the temperature of the flask has not reached equilibrium with the water bath, the initial pressure temperature data pair collected will not accurately reflect the vapour pressure of the substance at that temperature. This is because the temperature of the substance will still be changing and will not have stabilised at the temperature of the water bath. As a result, the measured vapour pressure will be higher or lower than if the flask temperature had reached equilibrium with the water bath.
b. Effect on the slope of the line: The slope of the line in a plot of lnPvapor vs 1/T is directly connected to the enthalpy of vaporisation of the material (Hvap). The slope of the line will be inaccurate if the temperature of the flask has not reached equilibrium with the water bath. This is due to the fact that the substance's temperature will continue to change, and the recorded vapour pressure will not precisely reflect the vapour pressure of the substance at that temperature.
c. Effect on Hvap calculation: A substance's enthalpy of vaporisation is proportional to the slope of the line in a plot of lnPvapor vs 1/T. If the temperature of the flask has not reached equilibrium with the water bath, the slope of the line will be inaccurate, as will the computed Hvap.
To summarise, it is critical to enable the temperature of the flask to approach equilibrium with the water bath in order to obtain correct findings when measuring a substance's vapour pressure. To avoid inaccuracies in the recorded vapour pressure, the slope of the line in a plot of lnPvapor vs 1/T, and the predicted Hvap, equilibrium must be reached.
For more such questions equilibrium.
https://brainly.com/question/28527601#
#SPJ11
It was wrong pls believe me the answer is A...It is arranged in a crystal lattice
The arrangement of the crystal lattices can be studies by the use of the x rays. Option A.
What is a crystal lattice?A crystal lattice is a repeating three-dimensional arrangement of atoms, ions, or molecules in a solid material that forms a periodic pattern. The lattice structure determines the physical properties of the crystal, such as its shape, density, and electrical and thermal conductivity.
We know that the x rays are able to show the way and the manner that the ions and the atoms in the lattice do come together to form the lattice.
Learn more about crystal lattice:https://brainly.com/question/10281663
#SPJ1
Missing parts;
The arrangement of particles in crystal lattices can be studied using
A. X-rays
B. β
-rays
C. α
-rays
D. γ
-rays
if -ra = -(dc,ldt) = 0.2 mol/liter.sec when ca = 1 mollliter, what is the rate of reaction when ca = 10 mollliter? note: the order of reaction is not known.
if -ra = -(dc,ldt) = 0.2 mol/liter.sec when ca = 1 mollliter, 2 mol/l.s is the rate of reaction when ca = 10 mollliter.
What is rate of reaction ?The reaction rate or rate of reaction is the rate at which a chemical reaction occurs, defined as proportional to the increase in product concentration per unit time and the decrease in reactant concentration per unit time.
This information is required for the large-scale production of many chemicals, such as fertilizers, drugs, and household cleaning products.
Given:
-ra = -(dc,ldt) = 0.2 mol/liter
ca = 10 mollliter
Now, -ra = kCa
=0.2 × 10
= 2 mol/l.s
Thus, 2 mol/l.s is the rate of reaction when ca = 10 mollliter.
To learn more about the rate of reaction, follow the link;
https://brainly.com/question/8592296
#SPJ1
Why is sodium important to life?
Answer: The human body requires a small amount of sodium to conduct nerve impulses, contract and relax muscles, and maintain the proper balance of water and minerals.
Explanation:
Sodium is important because it is an essential mineral for humans and other animals, as it plays a key role in maintaining healthy fluid balance, nerve and muscle function, and blood pressure regulation.
What is mineral?A mineral is a naturally occurring, inorganic solid that has a definite chemical composition and a specific crystal structure. Minerals are the building blocks of rocks and the foundation of the Earth’s crust. They are found in soil, rocks, and bodies of water. Minerals have many uses, from industrial applications to making up the components of jewelry, coins, and other decorative pieces. They also have a wide range of physical and chemical properties. The most common minerals are quartz, calcite, feldspar, mica, and olivine. Minerals can be identified by their color, crystal shape, luster, hardness, and streak.
To learn more about mineral
https://brainly.com/question/89259
#spj4
what is the total negative charge, in coulombs, of all the electrons in a small 1.60 g sphere of carbon? one mole of c is 12.0 g , and each atom contains 6 protons and 6 electrons.
The total negative charge is -1.29 x [tex]10^{5}[/tex] C. To find the total negative charge of all the electrons in the small carbon We need to determine the number of electrons present.
In the term of chemistry, total negative charge can happen If there are more electrons than protons, then the net charge on the object is negative.
First, we find the number of moles of carbon in the sphere:
1.60 g / 12.0 g/mol = 0.1333 mol
Next, we find the number of electrons by multiplying the number of moles by Avogadro's number:
0.1333 mol * 6.022 x [tex]10^{23}[/tex] electrons/mol = 8.04 x [tex]10^{23}[/tex] electrons
Finally, we multiply the number of electrons by the charge of a single electron to find the total charge:
8.04 x [tex]10^{23}[/tex] electrons * -1.60 x [tex]10^{-19}[/tex] C/electron = -1.29 x [tex]10^{5}[/tex] C
Here you can learn more about total negative charge
brainly.com/question/17568991
#SPJ4
a buffer is a solution that neutralizes ph. to buffer a solution with a ph 3, what would you add to neutralize?
To buffer a solution with a pH of 3, you would need to add a base to neutralize it.
A buffer solution is one that resists changes in pH when small amounts of acid or base are added. To buffer a solution with a pH of 3, you would need to add a base such as sodium hydroxide (NaOH) or potassium hydroxide (KOH). The amount of base added will depend on the amount of acid present in the solution.
As a general rule, for every mole of acid, you should add about 0.5 mole of base. Adding too much base will result in the solution having a pH higher than 7, which is not desirable. Therefore, it is important to carefully monitor the amount of base added to ensure the pH remains neutral.
Once the desired pH is achieved, the solution should be thoroughly mixed and tested to ensure the pH is stable.
Read more about Buffer solution:
https://brainly.com/question/8676275
#SPJ4
Consider atoms of the following elements. Assume that the atoms are in the ground state. The atom that contains exactly two unpaired electrons
The atom with the highest occupied energy sublevel and one electron is (B) calcium (Ca).
As a metal with the electron configuration [Ar] 4s1, calcium has one electron in the 4s orbital, the energy sublevel with the highest occupancy. The 4s orbital, which is at the highest energy level, has a capacity of two electrons. One electron occupies the 4s orbital in the case of calcium, making it the element with the fewest electrons in the highest occupied energy sublevel.
The outermost electron configuration of gallium, which belongs to group thirteen, is ns2 np1. The circumstance required by the question is the highest occupied sub-level, np1, which has just one electron.
Learn more about electron configuration:
brainly.com/question/29757010
#SPJ4
Consider atoms of the following elements. Assume that the atoms are in the ground state. The atom that contains only one electron in the highest occupied energy sublevel
(A) S
(B) Ca
(C) Ga
(D) Sb
(E) Br2.
select the correct interpretation of a mixed melting point analysis.
If the melting point range of the mixture of compounds is less than8°C the unknown compound and standard are likely identical.
If the melting point of the mixture of compounds is less than5°C higher than the melting point of the standard, the unknown compound and standard are likely identical
If the melting point of the mixture of compounds is within2°C of the melting point of the standard, the unknown compound and standard are likely identical
If the melting point of the mixture of compounds is less than5°C lower than the melting point of the standard, the unknown compound and standard are likely identical.
The correct interpretation of a mixed melting point analysis is if the melting point of the mixture of compounds is within 2°C of the melting point of the standard, the unknown compound and standard are likely identical.
Mixed melting point analysis is a laboratory technique used to identify and characterize unknown compounds. It involves mixing an unknown compound with a reference compound (standard) and determining the melting point of the mixture. The melting point is the temperature at which a solid changes to a liquid state.
In mixed melting point analysis, the reference compound should have a well-known, sharp melting point that is distinct from the melting point of the unknown compound. The mixture of the unknown compound and the standard is then heated gradually, and the temperature at which the mixture begins to melt is recorded.
If the melting point of the mixture is within 2°C of the melting point of the standard, it is likely that the unknown compound and the standard are identical. This is because a sharp, distinct melting point is characteristic of pure compounds, while mixtures of compounds generally have a broader, less distinct melting point range.
Mixed melting point analysis is a simple and reliable method for characterizing unknown compounds. However, it is important to use high-purity standards and to control for variables such as heating rate, cooling rate, and pressure to ensure accurate results.
Learn more about mixed melting point here: https://brainly.com/question/29989857
#SPJ4
Under the Hazard Communication Act, all of the following are true of container labeling EXCEPT: Chemical manufacturers and importers must provide a label that includes a signal word, pictogram, and hazard statement for each hazard class and category. Precautionary statements, product identifier, and supplier information must also be provided. The NFPA 704 symbol is not required.
As part of its recent amendment of the Hazard Communication Standard, OSHA has implemented new hazardous chemical labeling standards.
29 CFR 1910.1200 (HCS), bringing it in line with the United Nations' Globally Harmonized System of Chemical Classification and Labeling (GHS). These modifications will assist to improve the quality and uniformity of all chemical classification and labeling, as well as worker comprehension. As a consequence, workers will have greater information on the safe handling and use of hazardous chemicals, helping them to avoid accidents and illnesses caused by hazardous chemical exposure.
Learn more about Hazard Communication
https://brainly.com/question/21046723
#SPJ4
What is Sodium Carbonate?
In many manufacturing processes, sodium carbonate, often known as soda ash, is a regular ingredient. It is also used as a food additive. It's the carbonic acid disodium salt, which has a chemical
Chemical is what?
Kids Chemicals are defined as any material (such as an acids) that is created whenever two or more other chemicals interact with one another or that's also utilized to alter another substance (Entry 2 of 2).
A chemical reaction is what?
A shift in a chemical is referred to as a chemical reaction. A chemical process can be thought of more broadly as the process through which one or even more compounds transform into one or more new ones. Physiological effects, which don't affect the substance being changed, are distinct from chemical changes.
To know more about chemical visit:
https://brainly.com/question/29240183
#SPJ4
anhydrous sodium sulfate is used at the end of the procedure to dry the product. what are the intermolecular forces) at play that allow the sodium sulfate to dry the product?
It doesn't function as effectively with ethyl acetate as it does with solvents like diethyl ether. The fact that it is a fine powder with a lot of surface area makes it a fast drying agent.
What use of sodium sulfate to dry the product?All of these drying agents should be applied following the treatment of the organic solution with a saturated sodium chloride solution, which already eliminates the majority of the water from the organic layer.
Additionally, it is employed in the production of detergents as well as the Kraft paper pulping process.
Therefore, Anhydrous sodium sulphate is a common inert drying agent used in laboratories to remove water residues from organic solutions. When compared to the same drug, magnesium sulphate, it is thought to be more effective but slower-acting.
Learn more about sodium sulfate here:
https://brainly.com/question/4025301
#SPJ4
how to findbenzo a pyrene empirical formula
The empirical formula for benzo a pyrene is C₂₀H₁₂.
An Empirical formula is defined as the chemical formula of a compound that gives the proportions (ratios) of the elements present in the compound but not the actual numbers or arrangement of atoms. Empirical formula is the lowest whole number ratio of the elements in the compound.
An empirical formula says us the relative ratios of different atoms in a compound. The ratio is true on the molar level as well. For example, C₂₀H₁₂ is composed of twenty atoms of carbon and 12 atoms of hydrogen. Likewise, 1.0 mole of C₂₀H₁₂ is composed of 20 moles of carbon and 12 moles of hydrogen.
Learn more about empirical formula from the link given below.
https://brainly.com/question/14044066
#SPJ4
a single organic product was isolated after birch reduction of p-xylene. suggest a reasonable structure for this substance.
Birch reduction is a process that uses salt and ethanol to reduce aromatic compounds.
A new alkane is created as a result of the reaction, with one fewer carbons than the original substance. The outcome of a Birch reduction in the case of p-xylene, which has the chemical formula C8H10, would be a seven-carbon alkane.
Based on these data, a straight-chain alkane with seven carbon atoms, such as heptane, would be a suitable structure for the lone organic product identified during Birch reduction of p-xylene (C7H16). The final result would probably be a combination of isomers with various configurations for the seven carbons, with heptane serving as the typical structure.
Learn more about aromatic compounds:
brainly.com/question/14986994
#SPJ4
Tricia is at a crime scene involving a fire at a house. Her main task is to locate the point of origin. What does this task MOST likely include?
A. getting a search warrant to enter the house
B.
walking around the house with a sniffer
C. drawing a sketch of the crime scene
D. determining where the fire began
Low explosives are the least often utilised kind of explosives.
What is true about determining the time of death of a victim?It is possible to estimate the time of death by using the stiffening process known as rigour mortis, which has a generally known occurrence time. Generally speaking, if the body is warm and there is no stiffness, the death occurred less than three hours ago. Death occurred 3 to 8 hours earlier if the body is warm and stiff.
Examination, correlation, and interpretation are the three stages of a death inquiry in the examination phase.
Autolysis, also referred to as self-digestion, is the initial phase of human decomposition that starts right away after death. The body has no mechanism of obtaining oxygen or eliminating wastes after breathing and blood circulation are stopped.
To learn more about explosives refer to:
https://brainly.com/question/8735140
#SPJ1
Answer: D
Explanation: