Calculate the number of atoms in 2.1g of nitrogen
​

Answer:CAST!!!!!!!!!!!!!!!

Explanation:

Explanation:

which of the following is additive inverse of the following

Answer:

Mammals do not have instincts, so they must learn all their behaviors from their parents in order to survive.

Sea turtles must survive on their own, while mammals spend time with their parents and learn how to survive as they grow.

Sea turtles are less intelligent than mammals and, thus, cannot learn new behaviors from their parents.

Explanation:

Sea turtles rely on instincts more than mammals do, beacuse to get food for their survival.

Insticts are the natural impulse or motivation which are present from the inborn time to perform some functions in order to react in some specific external stimuli.

Mammals do not react impulsively in any external conditions because they have members or friends from their famliy side, who will teach them how to behave or react. But turtles didn't have that special person, so they do work rely on instincts to get food or many other purposes.

Hence, to survive sea turtles rely on instincts more than mammals do.

To know more about insticts, visit the below link:

https://brainly.com/question/16088051

From the available options with respect to Taylor's experiment, none of the data is qualitative.

These are data that cannot be measured using any instrument or assigned a numerical value.

Qualitative data are observable data based on perception.

This is unlike quantitative data that can be measured using relevant instruments and assigned numeric figures.

Mass can be measured in grams using a weighing balance, angle of inclination can be measured using relevant instruments, and time can be measured using a stopwatch.

Thus, none of the options is qualitative.

More on qualitative data can be found here; https://brainly.com/question/12929865

Answer:

None are Qualitative

Explanation: I took the test and got a 100%

The volume of the soft drink solution in milliliters that contains 102.5 g of sucrose is 11.93mL.

The volume of a solution can be calculated by dividing the mass by the density. That is;

Volume = mass/density

According to this question, a soft drink contains 12.1% sucrose (C12H22O11) by mass. This means that the mass of the sucrose is

12.1/100 × 102.5 = 12.40g of sucrose

Volume = 12.40g ÷ 1.04g/mL

Volume = 11.93mL

Therefore, the volume of the soft drink solution in milliliters that contains 102.5 g of sucrose is 11.93mL.

Learn more about volume at: https://brainly.com/question/1578538

When Lead reacted with nitric acid, lead(II) nitrate, nitrogen oxide and water are produced.

What products are produced when lead reacts with nitric acid?

Lead(II) nitrate, nitrogen oxide and water are the products which are produced by reacting lead and nitric acid with each other. The nitrogen attach with the lead molecule as well as oxygen which produces Lead(II) nitrate and nitrogen oxide.

So we can conclude that when Lead reacted with nitric acid, lead(II) nitrate, nitrogen oxide and water are produced.

Learn more about lead here: https://brainly.com/question/26320301

Answer:

Adding Catalyst can Speed up a Chemical reaction

Answer: catalyst

Explanation:

a catalyst is a substance that helps speed up chemical reactions.

hope this helped! ♡

Given the freezing-point depression for a solution is 2. 5 °C and the cryoscopic constant is 4.5 °c/m, the molality of the solution is 0.56 m.

Freezing-point depression is a drop in the temperature at which a substance freezes, caused when a smaller amount of another, non-volatile substance is added.

The freezing-point depression for a solution is 2. 5 °C. We can calculate the molality of the solution using the following expression.

ΔT = Kf × b

b = ΔT / Kf = 2.5 °C / (4.5 °C/m) = 0.56 m

where,

Given the freezing-point depression for a solution is 2. 5 °C and the cryoscopic constant is 4.5 °c/m, the molality of the solution is 0.56 m.

Learn more about freezing-point depression here: https://brainly.com/question/14115775

The molality of a solution will be 0.56 m. if the freezing point depression for a solution is 2.5° C.

Molality is the measure of the moles of any solute in a solution per unit kg of the solvent.

Given, the freezing-point depression for a solution is 2. 5 °C

The kf is 4.5° c/m

[tex]\rm \Delta T = Kf \times b\\\\b = \dfrac{\Delta T}{kf} \\\\b = \dfrac{2.5^ \circ C}{4.5 \circ C/m} = 0.56 m[/tex]

Where T is freezing point depression

kf is cryoscopic constant of the solvent

b is molality of the solution

Thus, the molality of the solution is 0.56 m.

Learn more about molality

https://brainly.com/question/20366625

#SPJ4

Answer:

2 , 3 and 4

Explanation:

hope this helps you

For an unknown using the retention times 1. 6 min for ch4, 12. 8 min for octane, 15. 4 min for the unknown, and 19. 6 min for nonane, the kovats retention index is mathematically given as

I = 807.857

Generally, the equation for the Kovats index(i)  is mathematically given as

[tex]I= \frac{100[n + (N - n) x (Log tr (unknown) - logtr (n))}{ logtr(N) - logtr(n))]}[/tex]

Therefore

[tex]I= \frac{100[ 1+8*(log(14.7) -log (1.5)}{log (19.8) - log (1.5)) 0]}[/tex]

I = 100[ 1+8*(0.991/1.12)]

I = 807.857

In conclusion, Kovats retention index

I = 807.857

Read more about Arithmetic

https://brainly.com/question/22568180

Kovats retention index is a system that converts the retention time into the independent constants of the system. The Kovats retention index for the unknown is 807.857.

The Kovats retention index (I) is the system used in analytical techniques like gas chromatography for the conversion of the retention time.  It is given mathematically as:

[tex]\rm I = \rm \dfrac{100[n+(N-n)x(Logtr(unknown)-logtr(n))}{Logtr(N)-Logtr(n)]}[/tex]

Substituting values and solving further,

[tex]\begin{aligned} \rm I &= \rm \dfrac{100[1+8 \times (Log(14.7) - log (1.5))}{(log (19.8) - log (1.5))0}\\\\&= 100 [ 1 + 8 (\dfrac{0.991}{1.12})]\\\\&= 807.857\end{aligned}[/tex]

Therefore, the Kovats retention index for an unknown is 807.857.

Learn more about the Kovats retention index here:

https://brainly.com/question/24130879

#SPJ4

The extraction of metal usually makes use of the method of precipitation in which a reagent is added which is able to precipitate the required metal in its pure form without impurities.

The process of extraction has to do with the removal of a substance from another. It is usually the way that pure substances are obtained in chemistry. The question is incomplete but I will try to give a general idea.

The extraction of metal usually makes use of the method of precipitation in which a reagent is added which is able to precipitate the required metal in its pure form without impurities. We can not make numerica;l calculatiosn as the values are missing.

Learn more about extraction of metals: https://brainly.com/question/14504733?

When the initial concentration of crystal Violet is double, the rate of the reaction will rise up about four times the initial rate.

The rate of a chemical reaction refer to the rate of change in concentration of the reaction over the change in time. Introduction.

When you double the concentration the rate doubles. The rate is proportional to the square of the concentration of a reactant. When the rate is doubled the concentration rate goes up four times. The rate is not affected by the concentration of a reactant.

Learn more about rate of chemical reaction here.

https://brainly.com/question/24795637

When doubling the initial concentration of crystal violet, the rate will increase four times.

The rate doubles when the concentration is doubled.

The rate is proportional to the square of a reactant's concentration. When the concentration is doubled, the rate increases fourfold.

The concentration of a reactant has no effect on the rate.

Thus, when doubling the initial concentration of crystal violet, the rate will increase four times.

Learn more about the rate of reaction

https://brainly.com/question/8592296

#SPJ4

Answer:

the change of atmospheric pressure during the last few (generally three) hours before a regular observation.

Explanation:

Even small changes in barometric pressure can greatly impact the weather. The Weather Trend directional arrow icon, included on many AcuRite weather station products, will show one of the following three barometric pressure trend directions, indicating potential future weather conditions.

The molarity of a solution that has 0.05 moles of HCL are added to 2 L of H2O is 0.025M.

The molarity of a solution can be calculated using the following formula:

M = n/V

Where;

M = 0.05/2

Molarity = 0.025M

Therefore, the molarity of a solution that has 0.05 moles of HCL are added to 2 L of H2O is 0.025M.

Learn more about molarity at: https://brainly.com/question/12127540

Moles are an estimation of the smallest unit of the molecules and the atoms in a sample. The moles of ammonium nitrate in a sample are 0.5010 moles.

Moles are calculated by dividing the mass of the substance in gm by that of the molar mass in gram per mole.  

Given.

Mass of ammonium nitrate = 40.10 gm

The molar mass of ammonium nitrate = 80. 0432 g/mol

Moles of ammonium nitrate are calculated as:

[tex]\begin{aligned}\rm moles &= \rm \dfrac{mass}{molar\; mass}\\\\&= \dfrac{40.10}{80.0432}\\\\&= 0.5010 \;\rm mol\end{aligned}[/tex]

Therefore, moles of ammonium nitrate present is option d. 0.5010 moles.

Learn more about moles here:

https://brainly.com/question/2396149

Answer:

two valence states: trivalent chromium (Cr III) and hexavalent chromium (Cr VI)

hope this helps, i can change it if it doesn't.

When an atom gains or donates electrons to form an ion is called ionization. Hydrochloric acid with water and carbon dioxide with water are the ionization reaction.

In ionization reactions, the chemical species undergo changes to gain or lose electrons to acquire charge.

The reaction between hydrochloric acid and water to yield hydronium ion and chloride ion, and the reaction between carbon dioxide and water to yield hydronium ion and bicarbonate ion is the example of ionization as electrons are donated and gained by the species.

Therefore, the ionization reaction results in the gain or loss of electrons.

Learn more about ionization here:

https://brainly.com/question/14575718

Answer:

B and D just did it

Explanation:

The reaction which shows the bronsted-lowry acid reacting is HCl + H₂O → H₃O⁺ + Cl⁻.

According to the Bronsted-Lowry theory, the species which donates H⁺ ion to the solution is known as Bronsted-Lowry acid and which accepts H⁺ ion is known as Bronsted-Lowry base.

Among the given reactions, only the reaction which is showing Bronsted-Lowry acid is:

HCl + H₂O → H₃O⁺ + Cl⁻

Here HCl is a Bronsted-Lowry acid as it gives H⁺ ion in the aqueous solution.

Hence, option (3) is correct.

To know more about Bronsted-Lowry acid, visit the below link:

https://brainly.com/question/1435076

0.010 M solution of hydrochloric acid, HCl has a pH of 2.00 but a 0.010 M solution of acetic acid, HCH₃COO, is 3.37 is because HCl dissociates more.

This is the separation of ions of an ionic compound when it dissolves.

Since 0.010 M solution of hydrochloric acid, HCl has a pH of 2.00 its hydrogen ion concentration is gotten from

pH = -log[H⁺]

So,

[tex][H^{+} ] = 10^{-pH}[/tex]

So, [H⁺] = 10⁻²

Also, since 0.010 M solution of acetic acid, HCH₃COO, has a pH of 3.37, its hydrogen ion concentration is gotten from

pH = -log[H⁺]

So,

[tex][H^{+} ] = 10^{-pH}[/tex]

So, [H⁺] = 10⁻³°³⁷ = 0.000427 = 4.27 × 10⁻⁴

Since the hydrogen ion concentration of HCl is 10⁻² and the hydrogen ion concentration of HCH₃COO is 4.27 × 10⁻⁴, we see that HCl dissociates more than HCH₃COO.

So, 0.010 M solution of hydrochloric acid, HCl has a pH of 2.00 but a 0.010 M solution of acetic acid, HCH₃COO, is 3.37 is because HCl dissociates more.

Learn more about dissociation here:

https://brainly.com/question/25854432

Answer:

The loss of trees and other vegetation can cause climate change, desertification, soil erosion, fewer crops, flooding, increased greenhouse gases in the atmosphere, and a host of problems for indigenous people.

Explanation:

Taking into account the Charles's law, to 94.36 K or -178.64 °C must a sample of helium gas be cooled from 139ºC to reduce its volume from 3.1 L to 0.71 L at constant pressure.

This law states that the volume is directly proportional to the temperature of the gas: for a given sum of gas at constant pressure, as the temperature increases, the volume of the gas increases, and as the temperature decreases, the volume of the gas decreases.

In summary, Charles' law is a law that says that when the amount of gas and pressure are kept constant, the ratio between volume and temperature will always have the same value:

[tex]\frac{V}{T} =k[/tex]

Studying two different states, an initial state 1 and a final state 2, it is satisfied:

[tex]\frac{V1}{T1} =\frac{V2}{T2}[/tex]

In this case, you know:

Replacing in Charles's law:

[tex]\frac{3.1 L}{412 K} =\frac{0.71 L}{T2}[/tex]

Solving:

[tex]\frac{3.1 L}{412 K} T2=0.71 L[/tex]

[tex]T2 =\frac{0.71 L}{\frac{3.1 L}{412 K}}[/tex]

T2= 94.36 K= -178.64 °C

Finally, to 94.36 K or -178.64 °C must a sample of helium gas be cooled from 139ºC to reduce its volume from 3.1 L to 0.71 L at constant pressure.

Learn more about the Charles's law:

https://brainly.com/question/4147359

The kinetic molecular theory of matter states that:

1. Matter is made up of particles that are constantly moving.

2. A change in phase may occur when the energy of the particles is changed.

3. All particles have energy, but the energy varies depending on the temperature the sample of matter is in. This in turn determines whether the substance exists in the solid, liquid, or gaseous state.

ANSWER:

Physical chemistry is the branch of chemistry that deals with the physical structure of chemical compounds, the way they react with other matter and the bonds that hold their atoms together. An example of physical chemistry is nitric acid eating through wood.

Explanation:

Individual gas molecules have different speeds. Collisions between these molecules can change individual molecular speeds, but this does not affect the overall average speed of the system.

Answer: 1. Ions

2. Cation

Explanation:

No explanation; this is basic vocabulary. :)

Answer:

alpha particles

Explanation:

alpha particles the least penetrating but potentially most damaging and gamma rays the most penetrating. A beta particle, also called beta ray or beta radiation, is a high-energy, high-speed electron or positron emitted by the radioactive decay of an atomic nucleus during the process of beta decay.

sana po makatulong

#keeponlearning

#Godbless