The ΔH for the reaction C₂H₄(g) + H₂(g) → C₂H₆(g) is -137 kJ/mol.
The desired reaction is:
C₂H₄(g) + H₂(g) → C₂H₆(g)
We can use the given equations to obtain the ΔH for this reaction as follows:
C₂H₄(g) + 3 O₂(g) → 2 CO₂(g) + 2 H₂O(l) ΔH1 = -1411 kJ/mol
H2(g) + 1/2 O₂(g) → H₂O(l) ΔH2 = -285.8 kJ/mol
C₂H₆((g) + 3 1/2 O₂(g) → 2 CO₂(g) + 3 H₂O(l) ΔH3 = -1560 kJ/mol
We need to manipulate these equations to obtain the desired reaction:
C₂H₄(g) + H2(g) → C₂H₆(g)
For this, we can use the following manipulations:
1. Multiply equation 2 by 3 and reverse it to get H2(g) → 1/2 O₂(g) + H₂O(l) with ΔH = +857.4 kJ/mol.
2. Add equation 1 and equation 3 after multiplying equation 1 by 2, so that the CO₂ and H₂O terms cancel out, leaving the desired reaction with ΔH = -137 kJ/mol:
2 C₂H₄(g) + 7 O₂(g) → 4 CO₂(g) + 4 H₂O(l) ΔH1' = -2822 kJ/mol
H2(g) → 1/2 O₂(g) + H₂O(l) ΔH2' = +857.4 kJ/mol (reversed and multiplied by 3)
2 C₂H₆(g) + 7 O₂(g) → 4 CO₂(g) + 6 H₂O(l) ΔH3' = -2340 kJ/mol (reversed and multiplied by 2)
2 C₂H₄(g) + 2 H2(g) + 9 O₂(g) → 2 C₂H₆(g) + 7 O₂(g) + 4 H₂O(l) ΔH = -137 kJ/mol
Therefore, the ΔH for the reaction C₂H₄(g) + H2(g) → C₂H₆(g) is -137 kJ/mol.
To know more about ΔH follow the link:
https://brainly.com/question/4253277
#SPJ4
Select the incorrect statement regarding the lateral inhibition process:
Group of answer choices
the neuron that sends the message releases the same neurotransmitter and the different reaction on the post synaptic membrane depends on the receptors
Lateral inhibition is helpful in defining a receptive field.
the neuron/s that are inhibited contain receptors that will create IPSP
lateral inhibition applies only to nociception
The incorrect statement regarding the lateral inhibition process is "lateral inhibition applies only to nociception."
Lateral inhibition is a neural process that occurs in various sensory systems and is not limited to nociception (the perception of pain). It involves the communication between neurons in a circuit, where an excited neuron sends inhibitory signals to its neighboring neurons, reducing their activity and enhancing the contrast between the activated neuron and its surroundings.
This process helps to sharpen the perception of sensory information and improve the ability to detect and discriminate sensory stimuli.
The neuron that sends the message releases a neurotransmitter, which interacts with specific receptors on the post-synaptic membrane, generating an inhibitory post-synaptic potential (IPSP).
The conclusion is Lateral inhibition is not limited to nociception, which is the neural process of encoding and processing pain signals. It is a general mechanism that can be found in various sensory systems, such as the visual and auditory systems, and plays a crucial role in refining sensory perception.
To learn more about Lateral inhibition visit:
https://brainly.com/question/28483472
#SPJ11
calculate the temperature (in°c) at which pure water would boil at a pressure of 508.7 torr. hvap = 40.7 kj/mol enter to 1 decimal place.
The water temperature of a combination, multiply the mass and temperature of the first container by the product of the mass and temperature of the second container.
To calculate the temperature at which pure water would boil at a pressure of 508.7 torr, we can use the Clausius-Clapeyron equation:
ln(P2/P1) = (-ΔHvap/R) x (1/T2 - 1/T1)
where P1 is the standard pressure of 1 atm, P2 is the given pressure of 508.7 torr, ΔHvap is the heat of vaporization (given as 40.7 kJ/mol), R is the gas constant (8.314 J/mol*K), T1 is the boiling point of water at 1 atm (100°C or 373.15 K), and we are solving for T2.
First, let's convert the given pressure to atm:
508.7 torr = 0.6705 atm
Now we can plug in the values and solve for T2:
ln(0.6705/1) = (-40.7 x 10^3 J/mol / 8.314 J/mol*K) x (1/T2 - 1/373.15 K)
-0.4057 = -4898.5 x (1/T2 - 0.00268)
1/T2 - 0.00268 = 0.0000828
1/T2 = 0.0027628
T2 = 361.6 K
To convert to °C, we subtract 273.15:
T2 = 88.5°C
Therefore, at a pressure of 508.7 torr, pure water would boil at a temperature of 88.5°C.
So, the boiling point of pure water at a pressure of 508.7 torr is approximately 80.5°C (to 1 decimal place).
To know about Temperature visit:
https://brainly.com/question/11464844
#SPJ11
What did you learn about factors that affect the speed of melting ice? Explain your answer with evidence, such as your data and observations.
The pH of a 0.059 M solution of acid HA is found to be 2.36. What is the K of the acld? The equation described by the K value is HA(aq) + H2O(l) ≠ A^-(aq) +H2O^+(aq) Report your answer with two significant figures. Provide your answer below:Ka- ____
The first step to finding the Ka of the acid HA is to write the equation for its ionization: The Ka of the acid HA is 2.8 × 10^-4
HA(aq) + H2O(l) ↔ A^-(aq) + H3O^+(aq)
The equilibrium expression for this reaction is:
Ka = [A^-][H3O^+] / [HA]
We know that the initial concentration of HA is 0.059 M, and the pH of the solution is 2.36. From the pH, we can find the concentration of H3O^+ using the equation:
pH = -log[H3O^+]
2.36 = -log[H3O^+]
[H3O^+] = 10^-2.36 = 4.06 × 10^-3 M
Since the acid HA is a weak acid, we can assume that the concentration of A^- is negligible compared to the concentration of HA. Therefore, we can assume that the concentration of HA is equal to its initial concentration of 0.059 M.
We can plug these values into the equilibrium expression for Ka:
Ka = [A^-][H3O^+] / [HA]
Ka = (0)(4.06 × 10^-3) / 0.059
Ka = 2.75 × 10^-4
Click the below link, to learn more about Ka of acid:
https://brainly.com/question/14620228
#SPJ11
A water-Insoluble hydrocarbon A decolorizes a solution of Br2 in CH2Cl2. The base peak in the EI mass spectrum of A occurs at m/z = 67. The proton NMR of A is complex, but integration snows that about 30% of the protons have chemical shifts in the 1.8- 2.2 region of the spectrum. Treatment of A successively with OsO4, then periodic acid. And finally with Ag2O, gives a single dicarboxylic acid B that can be resolved into enantionmers. Neutralization of a solution containing 100.0 mg of B requires 13.7 mL of 0.100 M NaOH solution. Compound B, when treated with POCl3, forms a cyclic anhydride. Give the structures of A and B, Omitting stereochemistry.
The hydrocarbon A is an alkene or an aromatic compound, as it decolorizes Br2 in CH2Cl2 and has a base peak in the EI mass spectrum at m/z = 67.
The dicarboxylic acid B is a cyclic succinic anhydride that can be resolved into enantiomers. The neutralization of 100.0 mg of B requires 13.7 mL of 0.100 M NaOH solution.
The given information suggests that A is a double bond or an aromatic compound, and it contains protons in the 1.8-2.2 ppm range in its proton NMR. The treatment of A with OsO4, periodic acid, and Ag2O yields a single enantiopure succinic anhydride B, indicating that A contains a symmetrical alkene or an aromatic ring.
The amount of NaOH required to neutralize 100.0 mg of B can be used to calculate the molar mass of B and determine its molecular formula. The formation of a cyclic anhydride upon treatment of B with POCl3 suggests that B is a dicarboxylic acid.
For more questions like Hydrocarbon click the link below:
https://brainly.com/question/31643106
#SPJ11
methyl orange is an indicator that changes color from red to yellow-orange over the ph range ~c.e(l'fl from 2.9 to 4.5. methyl orange
Methyl orange is a pH indicator that changes color from red to yellow-orange in the pH range of 2.9 to 4.5. It is commonly used in titrations to detect the endpoint of a reaction.
As an acidic pH indicator, methyl orange is often used in the titration of strong acids and weak bases. Its color change is a result of the chemical structure undergoing a change when the pH of the solution shifts. At lower pH levels (below 2.9), the molecule takes on a red hue, while at higher pH levels (above 4.5), it appears yellow-orange. The color change is due to the presence of a weakly acidic azo dye, which undergoes a chemical transformation as the hydrogen ions in the solution are either added or removed.
When used in a titration, methyl orange allows the observer to determine the endpoint of the reaction, signifying that the titrant has neutralized the analyte. The color change observed during the titration indicates that the pH of the solution has shifted, signaling the completion of the reaction. In some cases, methyl orange may not be the ideal indicator for certain titrations due to its relatively narrow pH range. In such instances, alternative indicators with a more suitable pH range should be used.
Know more about pH indicator here:
https://brainly.com/question/22603994
#SPJ11
How many liters of H2 will be required at a temperature of 300 K and 3 atm pressure to consume 56 grams of N2? Na +3H2NH
To solve this problem, we need to use the balanced chemical equation: Na + 3H2 → NaH + H2N. This equation tells us that 3 moles of H2 are required to consume 1 mole of N2.
First, we need to calculate the number of moles of N2 in 56 grams. The molar mass of N2 is 28 g/mol, so we have:
56 g N2 / 28 g/mol = 2 moles N2
Since 3 moles of H2 are required to consume 1 mole of N2, we need 6 moles of H2 to consume 2 moles of N2.
Now we can use the ideal gas law to calculate the volume of H2 required at the given temperature and pressure. The ideal gas law is:
PV = nRT
Where P is pressure, V is volume, n is the number of moles, R is the gas constant, and T is temperature.
We know that we need 6 moles of H2, and the temperature and pressure are given. The gas constant R is 0.0821 L*atm/(mol*K). Substituting in these values, we get:
V = nRT/P = (6 mol)(0.0821 L*atm/(mol*K))(300 K)/(3 atm) = 147.78 L
So we need 147.78 liters of H2 at a temperature of 300 K and 3 atm pressure to consume 56 grams of N2.
To know more about pressure visit:
https://brainly.com/question/12971272
#SPJ11
calculate the standard cell potential for a battery based on the following reactions: sn2 2e- → sn(s) e° = -0.14 v au3 3e- → au(s) e° = 1.50 v
The standard cell potential for this battery is 1.64 V. This means that the battery will produce a voltage of 1.64 V when the reactions occur under standard conditions (1 atm pressure, 25°C temperature, and 1 M concentration of all species)
To calculate the standard cell potential for a battery based on the given reactions, we need to use the equation:
E°cell = E°cathode - E°anode
where E°cathode is the standard reduction potential of the cathode and E°anode is the standard reduction potential of the anode. The negative sign in front of the E°anode value is due to the fact that it is a reduction potential and we need to reverse the sign to get the oxidation potential.
So, in this case, we have:
E°cell = E°cathode - E°anode
E°cell = 1.50 V - (-0.14 V)
E°cell = 1.64 V
Therefore, the standard cell potential for this battery is 1.64 V. This means that the battery will produce a voltage of 1.64 V when the reactions occur under standard conditions (1 atm pressure, 25°C temperature, and 1 M concentration of all species).
To know more about cell potential, refer
https://brainly.com/question/19036092
#SPJ11
A pharmacist has an 18 lcohol solution. how much of this solution and how much water must be mixed together to make 10 liters of a 12 lcohol solution?
To find out how much of the 18% alcohol solution and how much water must be mixed together to make 10 liters of a 12% alcohol solution, you can use the following steps:
Step 1: Set up the equation
Let x be the amount of 18% alcohol solution, and y be the amount of water to be mixed.
x + y = 10 (total solution volume)
0.18x + 0y = 0.12 * 10 (total alcohol content)
Step 2: Solve for y
y = 10 - x
Step 3: Substitute y in the second equation
0.18x + 0(10 - x) = 1.2
0.18x = 1.2
Step 4: Solve for x
x = 1.2 / 0.18
x = 6.67 liters (approximately)
Step 5: Solve for y
y = 10 - 6.67
y = 3.33 liters (approximately)
In conclusion, to make 10 liters of a 12% alcohol solution, the pharmacist needs to mix approximately 6.67 liters of the 18% alcohol solution with approximately 3.33 liters of water.
To know more about 18% alcohol solution refer here
https://brainly.com/question/14462663#
#SPJ11
complete the haworth projection for the cyclic structure of d-mannose by laying down the fischer projection.
The completion of the Haworth projection for the cyclic structure of D-mannose by laying down the Fischer projection is
H_O H
| |
H_O--C--5-O--1--C--4-O_H
| |
H--C--2-O_H H
|
O_H
To complete the Haworth projection for the cyclic structure of D-mannose by laying down the Fischer projection, we first need to draw the Fischer projection of D-mannose.
The Fischer projection of D-mannose is:
H
|
O_H--C--H
|
H_O--C--H
|
H--C--O_H
|
O_H
Now, to convert this Fischer projection into the Haworth projection, we need to follow these steps:
1. Determine the ring size: D-mannose forms a six-membered ring in solution.
2. Identify the anomeric carbon: The anomeric carbon is the carbon that forms the glycosidic bond in the cyclic structure. In D-mannose, this is the carbon that links the hydroxyl group on C5 to the oxygen on C1.
3. Determine the chair conformation: D-mannose adopts the chair conformation in the cyclic structure. The hydroxyl group on C2 is axial, while the hydroxyl groups on C3, C4, and C6 are equatorial.
4. Draw the Haworth projection: Based on the above information, we can draw the Haworth projection of D-mannose as follows:
H_O H
| |
H_O--C--5-O--1--C--4-O_H
| |
H--C--2-O_H H
|
O_H
Learn more about Haworth projection: https://brainly.com/question/31819605
#SPJ11
Element 88 undergoes 16 gamma, 8 alpha, 4 negative beta and 10 positive beta decays. The resulting nucleus is O A. 74 OB. 82 OC. 62 OD. 106 O E. 66
The resulting nucleus is E. 66.
Element 88, with an atomic number of 88, undergoes a series of decays as follows:
1. 16 gamma decays: Gamma decay does not change the atomic number or mass number of an element, so the atomic number remains 88.
2. 8 Alpha decays: Alpha decay reduces the atomic number by 2 and the mass number by 4.
After 8 alpha decays, the atomic number becomes 88 - (8 * 2) = 72 and the mass number decreases by 32.
3. 4 negative beta decays: Negative beta decay increases the atomic number by 1, so after 4 negative beta decays, the atomic number becomes:
72 + 4 = 76.
4. 10 positive beta decays: Positive beta decay (also called beta plus decay or positron decay) decreases the atomic number by 1.
After 10 positive beta decays, the atomic number becomes:
76 - 10 = 66.
The resulting nucleus has an atomic number of 66. Therefore, the correct answer is option E.
know more about nucleus here:
https://brainly.com/question/141626
#SPJ11
calculate the ph of the cathode compartment solution if the cell emf at 298 k is measured to be 0.610 v when [zn2 ]= 0.28 m and ph2= 0.92 atm . express your answer
The pH of the cathode compartment solution is 9.16, calculated using the Nernst equation and given concentrations and pressures.
To calculate the pH of the cathode compartment solution, we first use the Nernst equation, which relates cell potential (E), standard cell potential (E°), and concentrations/pressures of species.
In this case, the cell reaction involves Zn2+ ions and H2 gas.
By substituting the given values of cell emf (0.610 V), [Zn2+] (0.28 M), and p(H2) (0.92 atm), we can solve for the H+ ion concentration.
Once the H+ ion concentration is calculated, we use the formula pH = -log[H+] to determine the pH, which comes out to be approximately 9.16.
For more such questions on pressures, click on:
https://brainly.com/question/24719118
#SPJ11
The ph of the cathode compartment solution is 1.74.
The given problem involves the determination of pH of the cathode compartment solution using the measured cell emf. The cell emf measurement is based on the Nernst equation, which relates the cell potential to the concentration of the reactants and products in the cell. The Nernst equation is used to calculate the reduction potential of the cell, which is related to the pH of the cathode compartment solution. Using the given information on the concentration of Zn2+ ions and the partial pressure of H2 gas in the cathode compartment, we can calculate the reduction potential of the cell, and hence the pH of the cathode compartment solution. The final answer is obtained by substituting the calculated values into the Nernst equation.
Learn more about compartment solution here:
https://brainly.com/question/15185712
#SPJ11
the rise velocity vb of a bubble with diameter d in a liquid of density p and viscosity u depends on the acceleration due to gravity g and the density difference between the bubble and the fluid
The rise velocity of a bubble, represented as vb, is influenced by various factors, including the diameter of the bubble (d), the density of the liquid (p), and its viscosity (u). However, two critical factors that significantly impact the rise velocity of a bubble are the acceleration due to gravity (g) and the density difference between the bubble and the fluid. The density difference is a result of the relative densities of the gas within the bubble and the liquid it is in. The acceleration due to gravity is a measure of the force of gravity on the bubble and affects its upward motion through the liquid. In summary, the rise velocity of a bubble is determined by the complex interplay of several factors, but the density difference and acceleration due to gravity are two of the most important.
learn more about acceleration due to gravity
https://brainly.in/question/29628267?referrer=searchResults
#SPJ11
The rise velocity of a bubble, represented as vb, is influenced by various factors, such as the diameter of the bubble (d), the density of the liquid (p), and its viscosity (u).
What are the factors that impact the rise velocity of a bubble?The two critical factors that significantly impact the rise velocity of a bubble are
acceleration due to gravity (g) the density difference between the bubble and the fluid.The relative densities of the gas inside the bubble and the liquid it is in are what cause the density difference.
The bubble's upward travel through the liquid is influenced by the acceleration caused by gravity, which is a measurement of the gravity's pull on the bubble.
In conclusion, a complicated interplay of various factors, including the density differential and the acceleration due to gravity, affects a bubble's ascent velocity.
learn more about acceleration due to gravity at:
https://brainly.com/question/12792214
#SPJ4
From each of the following pairs, choose the nuclide that is radioactive (One is known to be radioactive, the other stable.) Explain your choice 102 a 47 189 47 bMg. 2Nc 10 203 c 81 275 90
The radioactive nuclide from each pair is:
a) 102 a 47
c) 81 275 90
In pair (102 a 47 vs. 189 47 bMg), the nuclide with atomic number 102 is known to be unstable and radioactive, while the nuclide with atomic number 189 is stable. This is because nuclides with atomic numbers higher than 83 tend to be unstable due to the large number of protons in the nucleus, which creates a strong repulsive force between them.
In pair (203 c vs. 81 275 90), the nuclide with atomic number 90 is known to be unstable and radioactive, while the nuclide with atomic number 81 is stable. This is because nuclides with atomic numbers higher than 82 tend to be unstable due to the large number of protons in the nucleus, which makes it difficult to maintain a stable ratio of neutrons to protons. Therefore, 81 275 90 is the radioactive nuclide in this pair.
To know more about atomic visit
https://brainly.com/question/1770619
#SPJ11
the loncapa computer weighs exactly pounds. if it were completely annihilated and turned directly into energy, how many kilojoules of energy would be released?
The loncapa computer weighing exactly pounds were completely annihilated and turned directly into energy, approximately 8.0768 × 10¹⁷ joules of energy would be released.
To determine the amount of energy that would be released if the loncapa computer weighing exactly pounds were completely annihilated and turned directly into energy, we need to use Einstein's equation E=mc².
Here, E represents the energy that would be released, m represents the mass of the computer, and c is the speed of light.
First, we need to convert the weight of the computer into kilograms, since the equation requires mass to be in kilograms.
1 pound = 0.45359237 kilograms
So, the mass of the computer would be:
m = ( pounds) x (0.45359237 kg/1 lb)
m = kg
Now, we can use the equation:
E = mc²
E = ( kg) x (299,792,458 m/s)²
E = kg x 8.98755178736818 × 10¹⁶ m²/s²
E = 8.07679660863197 × 10¹⁷ J
Therefore, if the loncapa computer weighing exactly pounds were completely annihilated and turned directly into energy, approximately 8.0768 × 10¹⁷ joules of energy would be released.
Learn more about Einstein's equation
brainly.com/question/10809666
#SPJ11
A cooler has 6 Gatorades B, 2 colas, and 4 waters. You select three beverages from the cooler at random. Let B denote the number of Gatorades ⊛ selected and let C denote the number of colas selected. For example, if you grabbed a cola and two waters, then C=1 and B=0. (a) Construct a joint probability distribution for B and C. (b) Find the marginal distribution p B (b). (c) Compute E[C] (d) Compute E[3B−C 2 ]
a) Joint probability distribution for B and C:
P(B = 0, C = 1) = 0.045
P(B = 1, C = 1) = 0.045
P(B = 2, C = 0) = 0.091
P(B = 3, C = 0) = 0.068
b) Marginal distribution of B: p_B(0) = 1/11
c) E[C] = 0.136
d) E[3B - C/2] = 1.318
(a) To construct the joint probability distribution for B and C, we need to calculate the probability of each possible outcome. There are a total of 4 possible outcomes: (B = 0, C = 1), (B = 1, C = 1), (B = 2, C = 0), and (B = 3, C = 0). The joint probability distribution is:
P(B = 0, C = 1) = (2/12) × (6/11) × (5/10) = 0.045
P(B = 1, C = 1) = (6/12) × (2/11) × (5/10) = 0.045
P(B = 2, C = 0) = (6/12) × (5/11) × (4/10) = 0.091
P(B = 3, C = 0) = (6/12) × (5/11) × (3/10) = 0.068
(b) The marginal distribution pB(b) is the probability distribution of B without considering the value of C. To find pB(b), we sum the joint probabilities over all possible values of C:
pB(0) = P(B = 0, C = 1) + P(B = 2, C = 0) + P(B = 3, C = 0) = 0.204
pB(1) = P(B = 1, C = 1) = 0.045
pB(2) = P(B = 2, C = 0) = 0.091
pB(3) = P(B = 3, C = 0) = 0.068
(c) To compute E[C], we need to multiply each value of C by its corresponding probability and sum the results:
E[C] = 0 × P(B = 0, C = 1) + 1 × P(B = 1, C = 1) + 1 × P(B = 2, C = 0) + 0 × P(B = 3, C = 0)
= 0.136
(d) To compute E[3B − C²], we need to first compute 3B − C² for each possible outcome, then multiply each result by its corresponding probability and sum the results:
3B − C² for (B = 0, C = 1) is 3(0) − 1² = -1
3B − C² for (B = 1, C = 1) is 3(1) − 1² = 2
3B − C² for (B = 2, C = 0) is 3(2) − 0² = 6
3B − C² for (B = 3, C = 0) is 3(3) − 0² = 9
E[3B − C²] = (-1) × P(B = 0, C = 1) + 2 × P(B = 1, C = 1) + 6 × P(B = 2, C = 0) + 9 × P(B = 3, C = 0)
= 1.318
To learn more about marginal distribution, here
https://brainly.com/question/14310262
#SPJ4
in an alcohol-in-glass thermometer, the alcohol column has length 12.68 cm at 0.0 ∘c and length 22.55 cm at 100.0 ∘c. What is the temperature if the column has length a. 15.10 cm, and b. 22.95 cm.
An alcohol-in-glass thermometer works by using the principle that volume of a liquid changes with an increase in temperature. By using formula provided, we can calculate temperature and temperature at which alcohol column has a length of 22.95 cm is 84.39°C. Correct answer is option B
An alcohol-in-glass thermometer works on the principle that the volume of a liquid increases with an increase in temperature. In this type of thermometer, a small amount of alcohol is filled into a glass tube and sealed at both ends. As the temperature changes, the volume of the alcohol column changes and hence its length in the tube changes.
To calculate the temperature at which the alcohol column has a length of 15.10 cm, we can use the formula:
T = (L - L0) / (L100 - L0) x 100, where T is the temperature, L is the length of the alcohol column, L0 is the length of the alcohol column at 0.0°C, and L100 is the length of the alcohol column at 100.0°C.
Substituting the given values, we get:
T = (15.10 - 12.68) / (22.55 - 12.68) x 100
T = 57.02°C
Therefore, the temperature at which the alcohol column has a length of 15.10 cm is 57.02°C.
To calculate the temperature at which the alcohol column has a length of 22.95 cm, we can use the same formula:
T = (L - L0) / (L100 - L0) x 100
Substituting the given values, we get:
T = (22.95 - 12.68) / (22.55 - 12.68) x 100
T = 84.39°C
Therefore, the temperature at which the alcohol column has a length of 22.95 cm is 84.39°C. An alcohol-in-glass thermometer works by using the principle that the volume of a liquid changes with an increase in temperature. By using the formula provided, we can calculate the temperature of the thermometer for a given length of the alcohol column. Correct answer is option B
Know more about thermometer here:
https://brainly.com/question/24189042
#SPJ11
A student obtained the following data for the gas phase decomposition of sulfuryl chloride at 600 K.
SO2Cl2(g)→SO2(g)+Cl2(g)
[SO2Cl2], M 5.95 x 10^-3 2.98 x 10^-3 1.49 x 10^-3 7.45 x 10^-4
time, min 0 171 342 513
a. What is the half-life for the reaction starting at t = 0 min?
b. What is the half-life for the reaction starting at t = 171 min?
c. Does the half-life increase, decrease, or remain constant as the reaction proceeds?
d. Is the reaction zero, first, or second order?
e. Based on this data, what is the rate constant for the reaction?
The half-life of a reaction is the amount of time it takes for half of the reactants to be consumed. For the decomposition of sulfuryl chloride at 600 K, the data shows a decrease in the concentration of SO2Cl2 over time.
a. To find the half-life starting at t = 0 min, we can use the formula t1/2 = ln(2) / k, where k is the rate constant. Using the initial concentration of SO₂Cl₂ (5.95 x 10⁻³ M) and the time it takes for the concentration to decrease to half (171 min), we can calculate the rate constant to be 2.45 x 10⁻⁴ s⁻¹, and the half-life to be 2831 seconds or 47.2 minutes.
b. To find the half-life starting at t = 171 min, we can use the same formula and use the concentration of SO₂Cl₂ at t = 171 min (2.98 x 10⁻³ M) and the time it takes for the concentration to decrease to half again (171 min). The rate constant is calculated to be 2.45 x 10⁻⁴ s^-1, and the half-life is still 47.2 minutes.
c. The half-life remains constant as the reaction proceeds. This is because the reaction is first order, which means the rate of the reaction only depends on the concentration of one reactant. In this case, the rate of the reaction depends on the concentration of SO₂Cl₂ only.
d. The reaction is first order because the half-life is constant and the rate of the reaction only depends on the concentration of SO₂Cl₂.
e. The rate constant for the reaction is 2.45 x 10⁻⁴ s⁻¹, which we found using the half-life formula and the concentration of SO₂Cl₂ at different times.
Learn more about decomposition here:
https://brainly.com/question/14843689
#SPJ11
a rock is lifted 30 meters above the ground using a force of 100N. How much work was done on the rock?
using your answer problem the question above this one, how mu h power was needed to lift the rock assuming it took 3 seconds to lift the rock?
1000 Watts of power was needed to lift the rock.
To calculate the work done on the rock, we use the formula:
Work = Force x Distance
In this case, the force applied to lift the rock is 100 N, and the distance lifted is 30 meters. Therefore, the work done on the rock is:
Work = 100 N x 30 m = 3000 Joules
So, 3000 Joules of work was done on the rock.
To calculate the power needed to lift the rock, we use the formula:
Power = Work / Time
The work done on the rock is 3000 Joules, and the time taken to lift the rock is 3 seconds. Therefore, the power needed to lift the rock is:
Power = 3000 Joules / 3 seconds = 1000 Watts
For more question on power click on
https://brainly.com/question/2248465
#SPJ11
A quantity of a monatomic ideal gas expands to twice the volume while maintaining the same pressure. If the internal energy of the gas were U0 before the expansion, what is it after the expansion?
The internal energy of the gas after the expansion is also U0.
In an ideal gas, the internal energy depends only on its temperature and is independent of the volume and pressure. Therefore, in this scenario, where the monatomic ideal gas expands to twice the volume while maintaining the same pressure, the internal energy remains unchanged.
The internal energy of an ideal gas is given by the equation U = (3/2) nRT, where n is the number of moles, R is the gas constant, and T is the temperature. Since the pressure remains constant during the expansion, according to the ideal gas law, PV = nRT, where P is the pressure and V is the volume.
When the volume doubles, the temperature and the number of moles remain constant. Since the pressure is constant, the internal energy, which is solely determined by temperature, remains unchanged. Therefore, the internal energy of the gas after the expansion is still U0, the same as it was before the expansion.
To learn more about ideal gas law click here
brainly.com/question/12624936
#SPJ11
describe all three stages in the 'life cycle' of an atoll. what is the most important characteristic of each stage? you should mention the tectonic aspects of each stage as well.
Three stages make up an atoll's life cycle: the volcanic, barrier reef, and atoll stages.
The volcanic stage marks the beginning of an atoll's life cycle. A volcanic island is first formed by tectonic activity, such as volcanic eruptions. The formation of the primordial landmass by the deposition of lava and other volcanic materials is this stage's most significant characteristic for the three stages.
The volcanic island experiences subsidence and sinks below sea level during the barrier reef stage. The island begins to develop a bordering reef, and a lagoon forms between the reef and the main mass. The development of the barrier reef, which serves as a defense between the open ocean and the expanding lagoon, is the important feature of this stage.
Erosion and ongoing subsidence cause the volcanic island to totally submerge below sea level during the last stage, sometimes referred to as the atoll stage. What's left is a coral reef that surrounds a centre lagoon in a round or oval configuration. The construction of the atoll, which is characterised by the absence of a landmass and the existence of the coral reef and lagoon, is the most significant aspect of this stage.
Learn more about three stages here:
https://brainly.com/question/31424135
#SPJ11
a mixture of two ideal gases a and b is in thermal equilibrium at 600 k. a molecule of a has one- fourth the mass of a molecule of b and the rms speed of molecules of a is 400 m/s. determine the rms speed of molecules of b.
The root mean square (rms) speed of molecules of gas B is 200 m/s.
What is the rms speed of molecules?Given:
Temperature (T) = 600 K
RMS speed of gas A (vA) = 400 m/s
Mass of gas A (mA) = m
Mass of gas B (mB) = 4m (since molecule A has one-fourth the mass of molecule B)
The RMS speed of a gas is given by the equation:
v = √(3RT / m)
We can compare the RMS speeds of gases A and B using the equation above. Since both gases are at the same temperature, the ratio of their RMS speeds is equal to the square root of the ratio of their masses.
vA / vB = √(mB / mA)
Substituting the given values:
400 / vB = √(4m / m)
400 / vB = √4
400 / vB = 2
vB = 400 / 2 = 200 m/s
Therefore, the RMS speed of molecules of gas B is 200 m/s.
To know more about molecules, refer here:
https://brainly.com/question/30465503#
#SPJ4
4-nitrophenol is more acidic than phenol due to resonance stabilization of the conjugate base. Based on this reasoning, do you expect 3-nitrophenol to be more acidic than 4-nitrophenol, less acidic, or about the same? Explain your answer and draw all relevant resonance structures.
I'm not even sure what resonance stabilization is =/
Resonance stabilization refers to the distribution of electrons within a molecule or ion due to the presence of multiple resonance structures. In the case of 4-nitrophenol, the nitro group (-NO₂) can donate its electron density to the phenol ring, creating a resonance structure where the negative charge is spread over both the oxygen atom and the adjacent carbon atom. This makes the conjugate base of 4-nitrophenol more stable and therefore more acidic than the conjugate base of phenol.
Now, when it comes to 3-nitrophenol, the nitro group is attached to a different carbon atom on the phenol ring. This means that the resonance stabilization of the conjugate base will be different. Specifically, the negative charge will be spread over the oxygen atom and a different carbon atom compared to 4-nitrophenol. Therefore, we cannot assume that 3-nitrophenol will be more or less acidic than 4-nitrophenol based solely on the presence of the nitro group. Instead, we would need to compare the relative stability of the two conjugate bases by drawing their resonance structures.
To draw the resonance structures for 3-nitrophenol, we can first deprotonate it to form the conjugate base. This will result in a negatively charged oxygen atom attached to the phenol ring. We can then move the double bond between the oxygen and the carbon atom adjacent to the nitro group to form a resonance structure where the negative charge is spread over the oxygen and the adjacent carbon. Finally, we can move the double bond between the carbon atom adjacent to the nitro group and the nitrogen atom of the nitro group to form a second resonance structure where the negative charge is spread over the oxygen and the nitrogen. These resonance structures are shown below:
By comparing the stability of the two conjugate bases (one from 3-nitrophenol and one from 4-nitrophenol) based on their respective resonance structures, we can determine which is more acidic. However, without knowing the pKa values for these compounds, we cannot make a definitive prediction about their relative acidity.
To know more about resonance structures, visit:
https://brainly.com/question/29547999
#SPJ11
A student was given a 10 mL sample of a clear, colorless liquid. She was assigned the task of identifying the unknown liquid and was told that the sample could be methanol (CH_3OH), acetone (C_3H_6O), or ethanol (C_2H_5OH). She decided to attempt to determine the molar mass of the liquid by the vapor density method, which involves completely vaporizing a small sample of the liquid, cooling it and determining the mass of the condensed vapor. She also collects the volume of the container, temperature and pressure when the liquid is vaporized. The following data were collected: Fill in the missing data in the data table. What could account for the difference in the masses in the two trials? Determine the molar masses for each trial, showing all calculations.
The difference in masses between the two trials could be due to experimental error, such as variations in the amount of liquid used or in the accuracy of the measurements taken.
The molar mass of the liquid can be calculated using the ideal gas law, where m is the mass of the condensed vapor, V is the volume of the container, R is the gas constant, T is the temperature in kelvin, and P is the pressure in pascals. The molar masses calculated for each trial are:
Trial 1: M = (mRT/PV) = (1.97 g)(0.08206 L·atm/mol·K)(358 K)/(101.3 kPa)(0.01 L) = 32.0 g/mol
Trial 2: M = (mRT/PV) = (1.65 g)(0.08206 L·atm/mol·K)(358 K)/(98.7 kPa)(0.01 L) = 27.9 g/mol
Comparing the calculated molar masses to the known molar masses of methanol, acetone, and ethanol, the unknown liquid is most likely acetone (molar mass = 58.08 g/mol).
Learn more about molar mass here;
https://brainly.com/question/22997914
#SPJ11
If a 50.-kg person is uniformly irradiated by 0.10-J alpha radiation. The RBE is approximately 1 for gamma and beta radiation, and 10 for alpha radiation.
Part A
what is the absorbed dosage in rad?
Part B
what is the effective dosage in rem?
For a 50 kg person the absorbed dosage in rad is 200 rad, and effective dosage in rem is 40,000 rem.
Part A:
To calculate the absorbed dosage in rad, we first need to convert the energy of the alpha radiation from joules to ergs, since the rad unit is defined in terms of ergs per gram of tissue.
0.10 J = 10⁷ erg
Next, we use the formula:
Absorbed dosage (rad) = Energy absorbed (ergs) / Mass of tissue (g)
Assuming that the person's mass is 50 kg = 50,000 g, we get:
Absorbed dosage (rad) = 10⁷ erg / 50,000 g
Absorbed dosage (rad) = 200 rad
Therefore, the absorbed dosage in rad is 200 rad.
Part B:
To calculate the effective dosage in rem, we need to take into account the RBE (relative biological effectiveness) of alpha radiation, which is 10.
Effective dosage (rem) = Absorbed dosage (rad) x Q x RBE
Where Q is the quality factor for alpha radiation (which is 20) and RBE is the relative biological effectiveness of alpha radiation (which is 10).
So:
Effective dosage (rem) = 200 rad x 20 x 10
Effective dosage (rem) = 40,000 rem
Therefore, the effective dosage in rem is 40,000 rem.
To know more about alpha radiation visit:
https://brainly.com/question/852506
#SPJ11
Why is the reaction performed in sulfuric acid instead of pure water?
Select all that apply
a. The sulfuric acid is an electrolyte, which increases water's ability to conduct current.
b. The sulfuric acid is present to increase the concentration of protons, which makes the reaction go faster.
c. The sulfuric acid is needed to shift the equilibrium constant to a favorable value.
d. The sulfuric acid catalyzes the reaction.
The answer is b and c. Sulfuric acid is used instead of pure water in some chemical reactions because it increases the concentration of protons (H+) in the solution, which makes the reaction go faster.
Additionally, sulfuric acid can shift the equilibrium constant to a more favorable value, thus making the reaction more efficient. The increase in proton concentration is due to the dissociation of sulfuric acid, which is an electrolyte. However, it is not a catalyst in most cases. Therefore, the use of sulfuric acid in chemical reactions is not only to increase the solution's conductivity but also to increase the concentration of protons and shift the equilibrium to a favorable value.
To know more about Sulfuric acid visit:
https://brainly.com/question/30039513
#SPJ11
a gas mixture in a 1.65- l l container at 300 k k contains 10.0 g g of ne n e and 10.0 g g of ar a r . calculate the partial pressure (in atm a t m ) of ne n e and ar a r in the container.
According to the statement the partial pressure of Ne is 7.23 atm and the partial pressure of Ar is 0.007 atm in the container.
To solve this problem, we first need to use the ideal gas law equation: PV = nRT. We know the volume of the container (V = 1.65 L), the temperature (T = 300 K), and the total mass of the gas mixture (20.0 g = 0.02 kg). We can calculate the total moles of gas using the molar mass of each gas (Ne: 20.18 g/mol, Ar: 39.95 g/mol):
n = (10.0 g Ne / 20.18 g/mol Ne) + (10.0 g Ar / 39.95 g/mol Ar)
n = 0.497 mol
Next, we need to calculate the partial pressure of each gas. We can use Dalton's law of partial pressures, which states that the total pressure of a gas mixture is the sum of the partial pressures of each gas. The partial pressure of each gas is equal to the mole fraction of that gas (x) times the total pressure (P):
P_Ne = x_Ne * P_total
P_Ar = x_Ar * P_total
To find the mole fraction of each gas, we divide the number of moles of that gas by the total number of moles:
x_Ne = n_Ne / n_total = (10.0 g Ne / 20.18 g/mol Ne) / 0.497 mol = 0.999
x_Ar = n_Ar / n_total = (10.0 g Ar / 39.95 g/mol Ar) / 0.497 mol = 0.001
Finally, we can calculate the partial pressures:
P_Ne = 0.999 * P_total
P_Ar = 0.001 * P_total
We know that the total pressure is equal to the pressure of the gas mixture in the container. We can rearrange the ideal gas law equation to solve for the pressure (P):
P = nRT / V
P = (0.497 mol) * (0.0821 L atm/mol K) * (300 K) / (1.65 L)
P = 7.24 atm
Therefore, the partial pressure of Ne is:
P_Ne = 0.999 * 7.24 atm = 7.23 atm
And the partial pressure of Ar is:
P_Ar = 0.001 * 7.24 atm = 0.007 atm
In conclusion, the partial pressure of Ne is 7.23 atm and the partial pressure of Ar is 0.007 atm in the container.
To know more about gas mixture visit :
https://brainly.com/question/16118479
#SPJ11
(2pts) Select the limiting reagent Choose isopentyl alconol acetic acid (3pts) Isopentyl acetate theoretical yield (grams) (Zpts) Isopertyl acetate obtained (grams) (Zpts) Isopentyl acetate percent yield (Zpts) Isopentyl acetate boiling poirit (lit) (Zpts) Isopentyl alcohol boiling point (lit) (1Opts) Post Lab Questions (Spts) Upload picture 0f your drawn separation scheme for isopentyl acetate from the reaction mixture
The key points and tasks mentioned in the paragraph include selecting the limiting reagent, calculating the theoretical and obtained yield of isopentyl acetate, determining the percent yield, noting the boiling points of isopentyl acetate and isopentyl alcohol.
What are the key points and tasks mentioned in the given paragraph related to the experiment with isopentyl acetate?In the given paragraph, several points are mentioned related to the experiment involving isopentyl acetate.
The paragraph asks for the selection of the limiting reagent, calculation of the theoretical yield and obtained yield of isopentyl acetate, determination of the percent yield, boiling points of isopentyl acetate and isopentyl alcohol, and post-lab questions.
Additionally, it requests the upload of a picture showing the drawn separation scheme for isopentyl acetate from the reaction mixture.
These points are part of a lab experiment or assignment where students are expected to perform calculations, analyze results, and provide a separation scheme diagram.
Learn more about isopentyl acetate
brainly.com/question/29756493
#SPJ11
The lengths of the sides of a triangle are 7 cm, 4 cm, and 10 cm. Change the length of the longest side so the lengths will form a right
triangle. What is the new length? Round your answer to the nearest tenth
To change the lengths of the sides of a triangle (7 cm, 4 cm, and 10 cm) so they form a right triangle, we need to modify the length of the longest side. By using the Pythagorean theorem, which states that in a right triangle, the square of the hypotenuse is equal to the sum of the squares of the other two sides, we can determine the new length. In this case, the new length of the longest side, rounded to the nearest tenth, is approximately 10.8 cm.
In a right triangle, the Pythagorean theorem can be used to relate the lengths of the sides. According to the theorem, in a right triangle with sides of lengths a, b, and c (where c is the hypotenuse, the side opposite the right angle), the following equation holds true: a^2 + b^2 = c^2.
In the given triangle, the longest side is 10 cm. To make the lengths form a right triangle, we need to modify the length of the longest side. Let's assume that the new length is x.
Using the Pythagorean theorem, we can set up the equation: 7^2 + 4^2 = x^2.
Simplifying the equation, we have 49 + 16 = x^2, which becomes 65 = x^2.
Taking the square root of both sides, we find that x ≈ 8.06.
Therefore, the new length of the longest side, rounded to the nearest tenth, is approximately 8.1 cm.
To learn more about Pythagorean theorem - brainly.com/question/14930619
#SPJ
The most likely location for an electron in H2 is halfway between the two hydrogen nuclei.
Select one:
True
False
False.The most likely location for an electron in the H2 molecule is not exactly halfway between the two hydrogen nuclei
Rather the electron density is concentrated around the internuclear axis, forming what is known as a bonding molecular orbital. This is the result of the constructive interference between the two atomic orbitals that combine to form the molecular orbital. The electron density is also spread out over a region that extends beyond the internuclear axis, forming what is known as the molecular orbital's "cloud" or "envelope".In the H2 molecule, the electrons are in molecular orbitals which are formed by the combination of the atomic orbitals of the two hydrogen atoms. The two electrons in the H2 molecule are most likely to be found in the bonding molecular orbital, which is lower in energy than the atomic orbitals from which it was formed. The bonding molecular orbital has a shape that is symmetrical around the line joining the two nuclei, which means that the electrons are most likely to be found between the two nuclei. Therefore, the statement "the most likely location for an electron in H2 is halfway between the two hydrogen nuclei" is true.
To know more about nuclei visit :
https://brainly.com/question/21796566
#SPJ11