calculate approximately the total translational kinetic energy of all the molecules in an e. coli bacterium of mass 2.0×10−15kg at 37 ∘c . assume 70% of the cell, by weight, is water, and the other molecules have an average molecular mass on the order of 105u .

The distance the rock must travel is 27.0 m

The time it takes the rock to travel the distance is 6.00 s

We can calculate the speed using the equation:

Speed = Distance/Time

Speed = 27.0 m/6.00 s

Speed = 4.5 m/s

What is distance?

Distance is a measurement of how far apart two objects or points are. It is usually measured in units such as meters, kilometers, miles, and feet. Distance can be used to measure the length of a journey, the size of a room, or the distance between two cities. It can also be used to measure the speed of an object, the height of a mountain, or the depth of a lake. Distance is an important concept in mathematics and science, and it is used in everyday life for finding the shortest route between two points.

To learn more about distance

Here: https://brainly.com/question/26550516

#SPJ4

50 degrees Celsius is extremely hot and is likely to cause discomfort, sweating, and dehydration. At this temperature, it is not safe to be outside for long periods of time without proper protection and hydration.

Why 50 degrees Celsius is extremely dangerous?

A temperature of 50°C (122°F) is considered to be very hot and can be dangerous to people and animals if they are exposed to it for long periods of time. This level of heat can cause discomfort, excessive sweating, dehydration, and heat exhaustion.

People who are exposed to this temperature should take precautions to stay cool, hydrated, and protected from the sun, such as wearing light-colored clothing and seeking shade. Prolonged exposure to 50°C can even lead to heat stroke, a life-threatening condition.

To learn more about degrees Celsius, visit: https://brainly.com/question/30403835

#SPJ4

The field of view for the low power (10x) objective would be 0.3 mm. The diameter of the field of view can be measured using a millimeter ruler underneath the scanning (4X) objective.

Given the scanning = 4x

The microscopic view = 3mm

The low power objective = 10x

The field of view and magnification power are inversely correlated, so as the magnification rises, the field of view falls. As a result, the field of view shrinks as magnification increases from 4x to 10x.

So, 1/10 = FOV/3

Field of view = 3/10 = 0.3mm

The field of view for the scanning objective of a microscope is typically between 4-10 micrometers.

To learn more about magnification click here https://brainly.com/question/2648016

#SPJ4

All answers are given below.

Inertia is the tendency of an object to remain in its state of motion, whether it be at rest or in uniform motion in a straight line, unless acted upon by an external force. It is a fundamental concept in classical physics, described by Isaac Newton's first law of motion, and is related to an object's mass. The greater an object's mass, the greater its inertia, making it harder to change its motion.

The rotational inertia of the bicycle wheel can be experimentally determined by using Newton's Second Law for rotation. The Second Law states that the net torque acting on an object is equal to the rate of change of its angular momentum, or:

Στ = Iα

where Στ is the net torque, I is the rotational inertia of the object, and α is the angular acceleration.

In the case of the bicycle wheel, the hanging weight provides the net torque, and the rotational inertia can be determined by measuring the angular acceleration of the wheel. To do this, you can use the following steps:

Measure the mass of the hanging weight and the radius of the wheel.

Suspend the weight from a string wrapped around the rim of the wheel.

Measure the angular acceleration of the wheel by using an angular velocity sensor or by measuring the time it takes for the wheel to complete a certain number of revolutions.

Substitute the measured values into the equation: Στ = Iα and solve for the rotational inertia I.

Repeat the experiment with different weights and/or different radii to determine the relationship between the rotational inertia and the mass and radius of the wheel.

Using the videos and interactable tools provided, you can visualize and experiment with different scenarios to determine the rotational inertia of the bicycle wheel. This method allows you to experimentally validate the relationship between rotational inertia, mass, and radius, and to gain a deeper understanding of the physics of rotational motion.

To know more about force visit:

https://brainly.com/question/28875770

#SPJ4

The quantum mechanical approach to atomic structure permits the calculation of energy of the electron .

Protons, neutrons, and electrons are the three fundamental building pieces that make up an atom in any element. table of elements' periodicities. In the grand scheme of things at the subatomic level, protons are positively charged particles while neutrons are uncharged particles.

Protons, neutrons, and electrons are the three primary subatomic particles that make up an atom. An atom's nucleus, which is made up of protons and neutrons, is surrounded by electrons. The atomic number and mass number of an element can be used to distinguish it. With the work of the English chemist John Dalton, the current atomic theory, which has continuously undergone refining, started to blossom at the beginning of the 19th century.

Learn more about the Atomic Structure here: https://brainly.com/question/14499668

#SPJ4

187cm will be 6.135ft .

What does the measuring unit foot mean?

"Feet" is the plural form of the single unit of measurement known as "foot." The symbol for foot or feet is, and the abbreviation is ft. One foot-long bags, for instance, can be written as either 1 ft or 1'.

Simply measure the length in inches, multiply the result by 12, and then you will have the conversion to feet. The linear footage is the resultant number. Height and width are unimportant for this dimension.

1 inch equals 2.54 cm or 0.0254 m.

1 ft. = 12 in. = 0.3048 m

187cm will be 6.135ft.

To learn more about length use link below:

brainly.com/question/16232889

#SPJ4

In the lambda calculus expression, the explicit parentheses are as follows: ((A(x.y(l(y.xy))).x.xy)(A(z.z))(A(z.w))).

A valid a-conversion for the expression would involve replacing all occurrences of the bound variable 'x' in the expression with another lambda expression that takes another argument and returns the desired result. For example, we can perform the a-conversion on the expression as follows: ((A(x.y(l(y.xy))).u.(uv.uv))(A(z.z))(A(z.w))).

A valid a-conversion for the expression is as follows:

(A z. w) is substituted for every occurrence of x in the expression.

((A x. (y (l y. (x y)) . (x (x y)))) (A z. z)) (A z. w)

= (y (l y. (A z. w) y)) . (A z. w) (A z. w)

= (l y. (A z. w) y) . (A z. w) (A z. w)

= (A z. w) y . (A z. w) (A z. w)

= (A z. w) (A z. w)

= w

Therefore, the final result of the expression is w.

learn more about lambda expression here:

brainly.com/question/29896722

#SPJ4

Acquisition is a critical component of the CRM strategy cycle and a successful acquisition strategy is necessary to attract and convert potential customers into actual ones. By following the steps outlined above, a company can ensure a successful acquisition strategy is implemented and achieve its growth and sustainability goals.

Acquisition is a critical component of the customer relationship management (CRM) strategy cycle because it involves the process of attracting and converting potential customers into actual ones. A successful acquisition strategy is necessary to maintain a steady flow of new customers, which is crucial for a company's growth and sustainability. In this article, we'll discuss why acquisition is necessary and the steps that should be taken to ensure a successful acquisition strategy is implemented.

Acquisition is the first step in the CRM strategy cycle and sets the foundation for the entire cycle. A successful acquisition strategy ensures that a company is attracting and converting potential customers into actual ones. This process is essential for a company's growth and sustainability as it helps to increase its customer base and revenue.

To ensure a successful acquisition strategy is implemented, the following steps should be taken:

Define the target audience: The first step in creating a successful acquisition strategy is to clearly define the target audience. This includes identifying the demographic, geographic, and psychographic characteristics of the target audience.

Determine the acquisition channels: The next step is to determine the channels through which the target audience will be reached. This could include traditional marketing channels such as print or broadcast advertising, or digital channels such as social media, email, or search engine optimization.

Measure and optimize the acquisition process: Once the acquisition channels have been established, it is important to measure the effectiveness of the acquisition process. This involves tracking key metrics such as the cost per acquisition and the conversion rate. Based on this information, the acquisition process can be optimized to improve its efficiency and effectiveness.

Personalize the customer experience: Personalizing the customer experience is key to a successful acquisition strategy. This involves understanding the needs and preferences of the target audience and tailoring the acquisition process to meet their specific needs.

Continuously evaluate and refine the acquisition strategy: Finally, it is important to continuously evaluate and refine the acquisition strategy. This involves regularly reviewing the acquisition process, tracking key metrics, and making changes as necessary to ensure the acquisition process remains effective and efficient.

Here you can learn more about acquisition

https://brainly.com/question/15855713#

#SPJ11

The linear velocity is 12.15 m/s, or v=0.810 m x 15.0 rad/s. The total acceleration angle is 22.4° = tan(-1)(55.9 m/s²/151.0 m/s²).

The distance traveled divided by the time it takes to travel is equal to velocity, which is a vector quantity that measures the rate and direction of change in an object's position. It is typically expressed in meters per second. Velocity is also related to acceleration, which is the rate of change in velocity.

(a) The equation v=r, where r is the radius of the circular arc and  is the angular velocity, can be used to determine the disc's linear velocity at the moment of release.

As a result, the linear velocity is 12.15 m/s, or

                                  v=0.810 m x 15.0 rad/s.

(b) The equation a_t = r, where r is the radius of the circular arc and  is the angular acceleration, can be used to determine the disc's tangential acceleration at the moment of release.

The tangential acceleration is a_t = 0.810 m × (15.0 rad/s)/(0.270 s)

                                  = 55.9 m/s²

because the angular acceleration is equal to the change in angular velocity divided by the time.

(c) The equation a_c = v²/r, where v is the linear velocity and r is the radius of the circular arc, can be used to calculate the disc's centripetal acceleration at the moment of release. As a result, the centripetal acceleration is 151.0 m/s²:

                        a_c = (12.15 m/s)²/(0.810 m).

(d) The sum of the disc's tangential and centripetal accelerations at the moment of release is the total acceleration; a_tot

              = a_t + a_c

                = 55.9 m/s² + 151.0 m/s²

                         = 206.9 m/s².

(e) The equation = tan(-1)(a_t/a_c), where a_t is the tangential acceleration and a_c is the centripetal acceleration, can be used to determine the angle of the total acceleration at the moment of release. As a result, the total acceleration angle is 22.4° = tan(-1)(55.9 m/s²/151.0 m/s²).

Learn more about linear velocity :

brainly.com/question/14413779

#SPJ4

The weighted average of the masses and locations of a composite plate's constituent materials may be used to calculate the mass and location of the mass center (center of mass).

The composite plate in this example is constructed of both steel (a) and brass (b) segments. Let us write m1 for the mass of the steel section and m2 for the mass of the brass segment. Steel's mass density is reported as rst, and brass's mass density is provided as rbr. The following equation may be used to compute the volume of each segment V1 = m1 / rst V2 = m2 / rbr Adding the masses of the steel and brass segments yields the total mass of the composite plate: m = m1 + m2 The coordinates of each section's center of mass are (x1, y1, z1) for the steel segment and (x2, y2, z2) for the brass segment. The composite plate's mass center (center of mass) may be calculated by calculating the weighted average of the locations of the steel and brass segments based on their masses: g = (m1*(x1, y1, z1) + m2*(x2, y2, z2)) / m.

learn more about mass  here:

https://brainly.com/question/19694949

#SPJ4

The net charge on the one mole of hydrogen is +20.07 Coulomb, if 0.01% of the electrons are removed from it.

A hydrogen atom contains 2 electrons, so 1 mole of hydrogen will have 2 × 6.022 × 10²³ = 1.2044 × 10²⁴ electrons.

Removing 0.01% of electrons = (0.01 × 1.2044 × 10²⁴)/100 = 1.2044 × 10²⁰ electrons.

We know that 6 × 10¹⁸ electrons are contained in -1 coulomb charge. So 1.2044 × 10²⁰ electrons will have a charge of (1.2044 × 10²⁰)/(6 × 10¹⁸) = -20.07 C

Removing electrons from hydrogen make there net positive charge of +20.07 Coulomb.

To know more about hydrogen, here

https://brainly.com/question/11837837

#SPJ4

The thin and tall design of graduated cylinders allows for improved precision at smaller volumes. The volume markers on the glass would be incredibly close together and challenging to read for lesser volumes if the cylinder was short and fat.

A graduated cylinder, also known as a measuring cylinder, is typically employed in laboratories where reasonably accurate volume measurements are needed. It has volume measuring indications and is cylindric and thin. It is employed to measure the mass of a solid in addition to the volume of a liquid. A succession of lines will be drawn on the graduated cylinder to indicate various measurement intervals. While intermediate markings won't have numbers, some lines will be marked with them. Since the measurement intervals on smaller graduated cylinders are often narrower, they measure more precisely.

Learn more about graduated cylinders here:

https://brainly.com/question/28349633

#SPJ4

The component of dance that provides the dancer with the ability to maintain his or her position while resisting physical forces, especially gravity, is known as alignment.

Alignment is the technique of adjusting the body's physical structure to create balance and strength. Proper alignment is essential for the dancer to execute the moves safely and with maximum power, while also preventing injury.

What is gravity?

Gravity is an invisible force that pulls objects towards each other. It is the force that causes objects to fall to the ground and is also responsible for keeping the planets in orbit around the sun. Gravity is one of the four fundamental forces of nature, along with the strong and weak nuclear forces and electromagnetism.

To learn more about gravity

Here: https://brainly.com/question/557206

#SPJ4

Orange peels can take as long as two years to decompose.  It is the process by which organic matter breaks down into smaller, simpler compounds over time.

This process is facilitated by decomposers such as bacteria, fungi, and insects, which feed on the organic matter and release energy, nutrients, and minerals back into the soil.

The decomposition time for orange peels depends on several factors, including the environmental conditions (temperature, humidity, and soil type), the presence of decomposers (bacteria, fungi, and insects), and the size and thickness of the peels.

In general, orange peels can take several months to several years to fully decompose in a natural environment.

In a compost pile, where the environmental conditions are controlled and optimized for decomposition, orange peels can decompose within a few months. In a landfill, where the conditions are not ideal for decomposition and the peels are often compacted and covered, the decomposition time can be much longer, potentially several years or more. Therefore, Orange peels can take as long as two years to decompose.

To know more about decomposition refer to:

brainly.com/question/28896356

#SPJ4

North celestial pole is closest at its highest point. celestial north pole (30o). On the horizon is the North Celestial Pole. heavenly pole (30o) in the south. Farthest

Measured from 0° to 90°, [C/U] is the angle between north and south. Distances north or south of the equator are calculated using horizontal lines known as latitudes. In order to calculate the distance east or west of the meridian in Greenwich, England, vertical lines known as longitudes are used. Together, latitude and longitude enable cartographers, geographers, and others to locate specific places on the globe. The Equator, the Tropics of Cancer and Capricorn, as well as the Arctic and Antarctic Circles, are among the five various types of latitude.

Learn more about latitudes here:

https://brainly.com/question/14833692

#SPJ4

Having the calibration object in front of the plane of motion would decrease the calculated velocity.

In motion analysis using video cameras, the velocity of an object is typically calculated from the position data of the object relative to a calibration object. The calibration object provides a reference frame for determining the position of the object of interest.

If the calibration object is in front of the plane of motion, it will obstruct the view of the object of interest and cause a decrease in the apparent velocity of the object as measured by the camera. This is because some of the motion of the object will not be captured by the camera, causing the measured position data to be less accurate and resulting in a lower calculated velocity.

In order to obtain accurate velocity measurements, it is important to place the calibration object in a location that does not obstruct the view of the object of interest and allows for the full motion of the object to be captured.

Learn more about velocity here: brainly.com/question/18084516

#SPJ4

pH equals pKa - log ([Acid]/[Salt]). The final log term changes from negative to positive when the argument is inverted, as in pH = pKa + log ([Salt]/[Acid]). The Henderson-Hasselbalch equation is the name of this particular representation of the ionisation or dissociation constant expression. pKa is the pH level at which a chemical species will accept or donate a proton. Therefore the relationship between Henderson-Hasselbalch equation,is used to determine the pKa and pH connection. It should not be used for concentrated solutions of acids or bases that have a very low or high pH, though, as it is only an approximation.

If you know either pH or pKa, we can solve for the other value using an approximation known as the Henderson-Hasselbalch equation:

pH is calculated as pKa + log(conjugate base/weak acid).

pH equals pKa + log ([A-]/[HA]).

pH is determined by actually dividing, the weak acid concentration by the log of the conjugate base concentration and the pKa value.

In the middle of the equivalency point:

pH = pKa

we should be aware of the relationship because this equation is occasionally stated for the Ka value rather than the pKa value:

"pKa" = "-logKa

To know more about the Henderson-Hasselbalch equation, visit:

https://brainly.com/question/13423434

#SPJ4

The Henderson-Hasselbalch equation is a useful tool in chemistry for calculating the pH of a solution containing a weak acid and its conjugate base.

A weak acid is an acid that dissociates only partially in aqueous solution. It releases a small number of hydrogen ions, resulting in a lower pH. Examples of weak acids include acetic acid, phosphoric acid, citric acid, and carbonic acid. Weak acids are important in biochemical reactions, as they are involved in many reactions in the body, including the release of energy from food.

It is named after Lawrence Joseph Henderson and Søren Peter Lauritz Sørensen, who developed the equation independently in 1909 and 1910, respectively. The equation can be written as:
pH = pKa + log [A-]/[HA]
Where pKa is the acid dissociation constant of the acid, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the acid. The equation can be used to calculate the pH of a solution given the concentrations of both the acid and its conjugate base.

To learn more about weak acid
https://brainly.com/question/29237738
#SPJ4

At most times, Mars appears to move eastward relative to the stars. The exceptions are during its periods of apparent retrograde motion, when Mars appears to move westward relative to the stars.

Mars orbits the Sun and due to Earth's faster orbit, it appears to move in the sky with respect to the stars. At most times, Mars appears to move in an eastward direction, from west to east against the background of stars.

However, during its periods of apparent retrograde motion, its motion appears to change direction and move westward for a period of time, before returning to its usual eastward motion. This apparent retrograde motion is an optical illusion caused by the relative positions of Mars, Earth and the Sun.

You can learn more about Mars at

https://brainly.com/question/644043

#SPJ4

Displacement of the air molecules at t = 0.001s and x = 1.0m can be calculated using the equation for a traveling sound wave.

Molecules are the smallest unit of matter that can exist by itself. They are formed when two or more atoms bond together. Molecules can be composed of atoms of the same element, or of different elements. Molecules can vary in size and complexity, ranging from simple diatomic molecules such as oxygen, to large macromolecules such as proteins and DNA. Molecules are the building blocks of life, and play an essential role in all forms of matter. Molecules are composed of electrons, protons, and neutrons which are held together by electrostatic forces. The arrangement and motion of these particles define the shape and properties of the molecule. Molecules also interact with each other through chemical reactions, which involve the exchange of electrons and the formation of new bonds.

Displacement = A * sin (2πft + φ)

where A is the amplitude, f is the frequency, and φ is the phase shift.

Given the values for t and x, we can calculate the displacement as:

Displacement = 1.0m * sin (2π*(1000 Hz) * 0.001s + 0)

Displacement = 1.0m * sin (2π)

Displacement = 1.0m * 0

Displacement = 0 m

sin (2π) = 0.

To learn more about molecules

https://brainly.com/question/473667

#SPJ4

Answer:Time = 266.43 hrs

To the nearest hour, the time it would take to cross the Atlantic Ocean at an average speed of 7 m/s would be 266 hrs.

Explanation:

The average velocity between 0.4 s and 1 s is equal to the displacement divided by the time interval. The displacement between 0.4 s and 1 s is 2 m and the time interval is 0.6 s, therefore the average velocity is 3 m/s.

Velocity is the rate of change of an object's position with respect to time. It is a vector quantity, which means it has both magnitude and direction. Velocity is commonly expressed in terms of the magnitude of the speed (the rate of change in the object's distance from a fixed point) and direction in which the object is travelling. The formula for velocity is v = d/t, where d is the displacement of the object in meters and t is the time in seconds. The SI unit for velocity is m/s.

Average velocity = displacement/time interval

= 2 m / 0.6 s

= 3 m/s

To learn more about velocity

https://brainly.com/question/24445340

#SPJ4

The magnitude of the force required to keep the rod moving at a constant speed is equal to the net force acting on the rod. If the rod is moving at a constant speed, then the net force acting on it is zero.

The net force is equal to the sum of all the forces acting on the rod, including any gravitational forces, friction forces, and any other external forces.

To calculate the magnitude of the force required to keep the rod moving at a constant speed, one must first identify all the forces acting on the rod and then calculate their sum. This sum should be equal to zero if the rod is moving at a constant speed.

It is important to note that this calculation assumes that the rod is moving in a uniform manner, with no acceleration. If the rod is accelerating, then the net force will be non-zero, and a different calculation will be required to determine the magnitude of the force required to cause the acceleration.

To learn more about magnitude please click on below link.

https://brainly.com/question/15681399

#SPJ4

The electric field  intensity between the two plates is 1181.81 V/m.

An electric field is a physical field that surrounds electrically charged particles and acts as an attractor or repellent to all other charged particles in the vicinity. It can also refer to a system of charged particles' physical field.

the electric potential difference between two plates: V = 26 V.

Separation between two plates = 0.022 m

Hence, electric field  intensity between the plates = ( 26 V ÷ 0.022 m)

= 1181.81 V/m.

So, the electric field  intensity between the two plates is 1181.81 V/m.

Learn more about electric field here:

https://brainly.com/question/15800304

#SPJ1

Most of what is known about Earth's early planetary history comes from:

Planetary history refers to the history of celestial bodies, such as planets, orbiting the Sun. This history spans from the formation of our Solar System more than 4.5 billion years ago to modern astronomy.

Studying planetary history helps us to better understand the universe and how our solar system evolved over time. This history also helps us understand the processes and phenomena that occur in our solar system, such as tides, space missions, asteroid formation, eclipses, and much more.

Learn more about  planetary history:

https://brainly.com/question/3649072

#SPJ4

It takes 4.186 x 10⁷ joules to raise the temperature of a cubic meter of water by 10 k.

The heat received by water is considered to be Q.

Thus, mass of water x heat capacity x temperature change = Q

In the case of water:

1 m3 = 1000 L volume (as 1 m3 Equals 1000 L)

Water density = 1 kg/L

As a result, the mass of water is given by,

Water mass = density of water x volume of water = 1kg/L x 1000 L

As a result, the mass of water equals 1000 kg.

Water specific heat = 4.186 kJ/kg K

The temperature rise is 10 K, hence T = 10 K.

So, Q = 41860 kJ

In addition, 1 kJ Equals 1000 J.

So, Q = 4.186 × 10⁷ J

As a result, the needed quantity of heat is 4.186 10⁷ J to raise the temperature of one cubic meter of water.

To know more about specific heat, visit,

https://brainly.com/question/27991746

#SPJ4

Immanuel Kant's "Groundwork of the Metaphysics of Morals" is a philosophical treatise that explores the concept of morality.

In this work, Kant argues that moral principles are not based on human preferences or social conventions, but rather are grounded in universal, rational principles.

He asserts that these principles can be derived through reason alone and that they apply to all rational beings, regardless of their cultural or historical context.

Kant's main argument is that moral obligations are determined by the categorical imperative, which states that an action is morally right if it can be made into a universal law that can apply to all rational beings.

He also argues that morality requires individuals to act out of respect for the inherent dignity of other human beings, rather than out of a sense of self-interest or duty.

In summary, the "Groundwork of the Metaphysics of Morals" is a foundational text in the field of moral philosophy that sets out Kant's views on the nature of morality and the basis for moral obligations.

It remains an influential work in contemporary ethics and continues to be widely studied and debated.

To know more about Metaphysics,

https://brainly.com/question/28795910

#SPJ4

Relative rate of effusion for the orange to blue spheres is 1.316.

Diffusion is a characteristic of particles in both liquids and liquid solutions, as well as, to a lesser extent, of solids and solid solutions. A small hole, such as the hole in a balloon, allows gaseous molecules to escape into an enclosed space, which is referred to as effusion.

Although the effusion phenomenon had been observed for thousands of years, it wasn't until the early 19th century that quantitative experiments connected the effusion rate to molecular characteristics. A gaseous substance's rate of effusion is inversely related to its molar mass, squared. Graham's law, named for the Scottish chemist Thomas Graham, describes this relationship (1805–1869).

Rate of effusion of Orange / Rate of effusion of blue =[tex][M_{blue }/ M_{orange}]^{1/2}[/tex]

[tex]Vrms = \sqrt {(3RT/M)}[/tex]

[tex]V_{orange} / V_{blue} = [ M_{blue} / M_{orange}]^{1/2}[/tex]

Rate of effusion of Orange / Rate of effusion of blue =  495.0 /  376.0

= 1.31

To learn more about Velocity, click the given link,

brainly.com/question/25749514

#SPJ4

A vector of magnitude 3 cannot be added to a vector of magnitude 4 so that the magnitude of the resultant is 5

Let a vector equal 3 units.

unit vector b = 4

Reaction = R

Since they cannot be added, vectors. Therefore, we must adhere to the law of vector addition.

See the Figure:

By Pythagoras's theorem,

R² = a² + b²

=> R² = (3)² + (4)

²

=> R² = 9 + 16

=> R = √25

=> R = 5 unit

Resultant is 5

Learn more about Vector:

https://brainly.com/question/30394406

#SPJ4

The difference between the motion of the ice cube and the other objects is that the ice cube is sliding down the incline, while the other objects are rolling.

The ranking of which objects reach the bottom of the incline first depends on their mass, size, shape, and initial velocity, as well as the incline angle and surface friction. Generally, a heavier object with a smaller size and a more spherical shape will reach the bottom faster than a lighter object with a larger size and a more irregular shape.

The mass distribution of the other objects can affect their rotational motion as well as their linear motion, and thus their time to reach the bottom. A more balanced mass distribution can result in a more uniform and efficient rolling, while an uneven mass distribution can cause wobbling and slowing down motion.

The effect of the mass distribution on the time it takes for an object to reach the bottom can be demonstrated by comparing two objects with different shapes and mass distributions, such as a sphere and a cylinder, rolling down the same incline.

The sphere will reach the bottom faster due to its more uniform and efficient rolling motion, while the cylinder may take longer due to its wobbling motion.

To know more about the motion of objects on an inclined plane

brainly.com/question/13597480

#SPJ4

Intensified wavelength means that the amplitude or the strength of that specific wavelength has increased.

Intensified wavelength refers to an increase in the amplitude or strength of a specific wavelength in a light or electromagnetic wave. Amplitude is a measure of the strength or height of a wave, and when it increases, the wave becomes more intense.

This increase in intensity results in a greater amount of energy being carried by the wave and can cause changes in the physical and chemical properties of the objects it interacts with. Intensifying a wavelength can be achieved through various techniques.

To know more about wavelength, click here.

https://brainly.com/question/13533093

#SPJ4