By how many hertz is the frequency of the sound produced by the lower note lower than the frequency of the combined sound

The net force on any object moving at constant velocity is zero. This is because the object is not accelerating, which means that the forces acting on it are balanced.

If the net force were 10 meters per second squared, the object would be accelerating in the direction of the force. The weight of an object is the force with which it is attracted to the Earth due to gravity. The velocity of an object is its speed in a particular direction. Therefore, the net force on an object moving at constant velocity is equal to its weight if the object is being acted upon only by gravity. However, if there are other forces acting on the object, such as friction or air resistance, the net force may not be equal to its weight. It is also not about half its weight since the net force is zero.

Learn more about gravity here: brainly.com/question/31321801

#SPJ11

The head loss over 20 km of pipe is approximately 2059 meters.

Head loss over 20 km of pipe, we can use the Darcy-Weisbach equation:

Δh = f * (L/D) * ([tex]v^2[/tex]/2g)

here:

Δh = head loss

f = Darcy friction factor (dimensionless)

L = length of pipe (m)

D = diameter of pipe (m)

v = mean velocity of flow (m/s)

g = acceleration due to gravity (9.81 m/s)

First, we need to calculate the Reynolds number to determine the friction factor:

Re = (v * D) / ν

here ν is the kinematic viscosity of the fluid, which we'll assume to be 1.5 x 10^-6 m^2/s for water at 20°C.

Re = (0.5 m/s * 0.3 m) / (1.5 x 10^-6 m/s)

Re ≈ 10

Since the Reynolds number is above 4000, we can assume the flow is turbulent and use the Colebrook equation to find the friction factor:

1 / √f = -2.0 * log10((ε/D) / 3.7 + 2.51 / (Re * √f))

where ε is the pipe roughness, which we'll assume to be 0.26 mm for cast iron.

We can solve for f using an iterative method. Starting with a guess value of f = 0.02:

1 / √0.02 = -2.0 * log10((0.00026 m / 0.3 m) / 3.7 + 2.51 / (10 * √0.02))

√f ≈ 0.0086

f ≈ 0.000074

The head loss:

Δh = 0.000074 * (20000 m / 0.3 m) * (0.5 m/s) / (2 * 9.81 m/s)

Δh ≈ 2059 m

Therefore, the head loss over 20 km of pipe is approximately 2059 meters.

Learn more about head loss Visit: brainly.com/question/31298928

#SPJ4

We determine the  head loss over 20 km of pipe as 2059 meters.

We apply the Darcy-Weisbach equation:

Δh = f * (L/D) * (/2g)

Δh = head loss

f = Darcy friction factor (dimensionless)

L = length of pipe (m)

D = diameter of pipe (m)

v = mean velocity of flow (m/s)

g = acceleration due to gravity (9.81 m/s)

We find  the Reynolds number to determine the friction factor:

Re = (v * D) / ν

Re = (0.5 m/s * 0.3 m) / ([tex]1.5 * 10^-^6[/tex] m/s)

Re = 10

we make assumption that the flow is turbulent and use the Colebrook equation to find the friction factor because the Reynolds number is above 4000

1 / √f = -2.0 * log10((ε/D) / 3.7 + 2.51 / (Re * √f))

ε =  the pipe roughness= 0.26 mm for cast iron.

f = 0.02:

1 / √0.02 = -2.0 * log10((0.00026 m / 0.3 m) / 3.7 + 2.51 / (10 * √0.02))

√f = 0.0086

f _= 0.000074

The head loss:

Δh = 0.000074 * (20000 m / 0.3 m) * (0.5 m/s) / (2 * 9.81 m/s)

Δh=  2059 m

Learn more about head loss  at:

https://brainly.com/question/31298928

#SPJ4

785 nm diode laser has lower fluorescence interference and reduced sample damage compared to 1064 nm laser in Raman spectroscopy.

A 785 nm diode laser offers significant advantages over a 1064 nm laser when used as a Raman excitation source.

The most prominent advantage is the reduced fluorescence interference, which results in higher signal-to-noise ratios and improved spectral quality.

Furthermore, the 785 nm laser causes less sample damage due to its lower energy compared to the 1064 nm laser, thus preserving the integrity of the sample during analysis.

Additionally, 785 nm lasers are more cost-effective and have a wider range of compatible detectors, making them a more attractive choice for Raman spectroscopy applications.

For more such questions on fluorescence, click on:

https://brainly.com/question/31633538

#SPJ11

A radio wave near to the planet's surface travels once around the Earth in a big circle in around 133.13 milliseconds.

This is due to the fact that the Earth's circumference is around 40,075 kilometres, and that radio waves move at about 299,792,458 metres per second at the speed of light in a vacuum. As a result, the formula: can be used to determine how long it takes a radio wave to travel in a vast circle near the surface of the Earth.

Time = Speed x Distance

The distance in this instance is 40,075 km, or 40,075,000 metres. The time obtained by multiplying this by the speed of light is roughly 0.13313 seconds, or 133.13 milliseconds.

learn more about radio here:

https://brainly.com/question/866150

#SPJ11

C) 8 bright fringes.Explanation:

The formula for the number of bright fringes produced by a diffraction grating is given by:Nλ = d sinθwhere N is the number of bright fringes, λ is the wavelength of the light, d is the distance between adjacent slits on the grating (in this case, d = 1/3952 cm), and θ is the angle between the central maximum and the nth bright fringe.We are given that the wavelength of the laser light is 514 nm, and the grating has 3952 lines/cm. We can convert this to the distance between adjacent slits:d = 1/3952 cm = 2.529 x 10^-4 cmThe screen can show all bright fringes up to and including ±90.0° from the central spot. This means that the maximum value of θ is 90.0°, or π/2 radians. We can use this information to find the maximum value of N:Nλ = d sin(π/2)

N = d/λ = (2.529 x 10^-4 cm)/(514 nm) = 0.49Since N must be an integer, the total number of bright fringes that will show up on the screen is 8 (option C).

Learn more about bright fringe here:

https://brainly.com/question/31315270

#SPJ11

The centripetal force on the end of a wind turbine blade is given by the equation Fc = mω²r, where Fc is the centripetal force, m is the mass, ω is the angular velocity, and r is the radius of the blade. In this case, the radius of the blade is given as 74 m, and the angular velocity is 0.5 rev/s, which is equivalent to 3.14 rad/s. The mass of the blade is given as 4 kg. Plugging these values into the equation, we get:

Fc = (4 kg) x (3.14 rad/s)² x (74 m) = 878 N

Therefore, the centripetal force on the end of a 74-m wind turbine blade rotating at 0.5 rev/s with a mass of 4 kg is approximately 878 N.
To calculate the centripetal force on the end of a 74-meter wind turbine blade, we first need to determine its linear velocity. Here are the steps to follow:

1. Convert the rotational speed to radians per second: 0.5 rev/s * (2π radians/rev) = π radians/s
2. Calculate linear velocity (v) using the formula: v = rω, where r is the radius (74 meters) and ω is the angular velocity (π radians/s)
  v = 74 * π = 74π meters/s
3. Calculate centripetal acceleration (a_c) using the formula: a_c = v²/r
  a_c = (74π)² / 74 = 74π² m/s²
4. Finally, calculate the centripetal force (F_c) using the formula: F_c = ma_c, where m is the mass (4 kg)
  F_c = 4 * 74π² = 296π² N

So, the centripetal force on the end of the 74-meter wind turbine blade rotating at 0.5 rev/s with a mass of 4 kg is approximately 296π² Newtons.

To know more about centripetal visit

https://brainly.com/question/17123770

#SPJ11

In a vertical wire carrying current straight down, to the east of the wire, the magnetic field would point northward.

Using the right-hand rule to determine the direction of the magnetic field around the vertical wire carrying the current straight down.

Step 1: Imagine your right hand gripping the wire with your thumb pointing in the direction of the current flow. In this case, the current is flowing straight down, so your thumb should be pointing downward.

Step 2: Your fingers will curl around the wire in the direction of the magnetic field. Since we're interested in the magnetic field to the east of the wire, extend your fingers in that direction.

Step 3: Notice the direction in which your fingers are pointing. They should be pointing towards the north.

Therefore, the magnetic field to the east of the wire points A) toward the north.

To know more about right hand rule, click here

https://brainly.com/question/30641867

#SPJ11

Answer:As the skater goes down one side of the pool and up the other, potential energy changes to kinetic energy. At the top of the pool, the skateboarder has the most potential energy and the least kinetic energy, and at the bottom of the pool, the skateboarder has the most kinetic energy and the least potential energy. As the skateboarder rides down the side of the pool, the potential energy is converted into kinetic energy, causing the skateboarder to accelerate. At the bottom of the pool, all the potential energy has been converted to kinetic energy. As the skateboarder goes up the other side of the pool, the kinetic energy is gradually converted back into potential energy, causing the skateboarder to slow down and eventually come to a stop at the top of the other side.

Explanation:

The negative charge placed at the center of a ring of uniform positive charge will experience an attractive force towards the positive charges, causing it to oscillate back and forth along a diameter of the ring.

When a negative charge is placed at the center of a ring of uniform positive charge, it experiences a net attractive force due to the positive charges. However, since the positive charges are uniformly distributed along the ring, the attractive forces from opposite sides of the ring cancel each other out, resulting in no net force in the radial direction.

The negative charge is free to move only along a diameter of the ring, oscillating back and forth as it experiences the attractive forces from the positive charges. This motion continues as long as the charges remain undisturbed and no other forces act upon the system.

Learn more about charge here:

https://brainly.com/question/11944606

#SPJ11

Using vector addition, the initial velocity of car B can be calculated as 34 m/s at 62 degrees north of east, assuming no external forces. Three keywords: vector addition, initial velocity, and external forces.

To calculate the initial velocity of Car B, we need to use vector addition. We know the initial velocity of Car A is 30 m/s, travelling northward. The final velocity of the combined cars is at 28 degrees north of east, but we need to break this down into its northward and eastward components to add it to Car A's velocity. Using trigonometry, we can find that the eastward component of the final velocity is 22.2 m/s, and the northward component is 16.3 m/s. We can then use vector addition to find the resultant velocity of the two cars, which is the initial velocity of Car B. Assuming no external forces acted upon the cars during the collision, we can use the principle of conservation of momentum to determine that the total momentum before the collision was equal to the total momentum after the collision. Thus, we can use vector addition to determine the initial velocity of Car B as 34 m/s at 62 degrees north of east.

Learn more about initial velocity here:

https://brainly.com/question/9163788

#SPJ11

The mass is located far out in space, away from any significant mass that would cause gravitational effects.

Since there is no gravitational force acting on the mass, the tension in the rope will be zero. The rope does not need to support any weight, as the mass is effectively weightless in the absence of gravitational forces.

The tension in the rope depends on the mass and acceleration of the suspended object, as well as the shape and rotation of the rope. If the object is not accelerating and the rope is straight and horizontal, then the tension is zero. If the object is accelerating or the rope is curved or vertical, then the tension is non-zero and varies along the length of the rope.

One way to find the tension at any point in the rope is to apply Newton’s second law to a small segment of the rope and consider the forces acting on it. For example, if the rope is whirling in a circle with angular velocity ω and linear mass density μ, then the tension at a distance r from the center of rotation is given by T® = μrω.

to learn more about gravitational force click here:

brainly.com/question/3009841

#SPJ11

The average force produced by the rocket engine is 8.0 N.

The impulse-momentum theorem states that the impulse on an object is equal to its change in momentum. In this case, the impulse delivered by the engine is 6.0 Ns, and we can calculate the change in momentum of the rocket as:

where Δp is the change in momentum, m is the mass of the rocket, and Δv is the change in velocity.

Since the rocket starts from rest, we can simplify this to:

where v is the final velocity of the rocket after the engine burns.

We can rearrange the impulse-momentum theorem to solve for the final velocity:

Plugging in the values given in the problem, we get:

The average force produced by the engine can then be calculated using Newton's second law:

where a is the acceleration of the rocket, which is equal to the change in velocity divided by the time:

Plugging in the values we just calculated, we get:

Finally, we can calculate the average force produced by the engine:

To learn more about average force, here

https://brainly.com/question/29781083

#SPJ1

The complete question is:

A 0.10-kilogram model rocket's engine is designed to deliver an impulse of 6.0-Ns. If the rocket engine burns for 0.75 seconds, what average force (in newtons) does it produce?

The required mass of the disk is approximately 60 kg.

To find the mass of the disk, we can use the formula relating torque, moment of inertia, and angular acceleration:

Torque (τ) = Moment of inertia (I) × Angular acceleration (α)

The moment of inertia of a solid disk is given by:

I = (1/2) × m × r²

where m is the mass of the disk and r is the radius of the disk.

Given:

Torque (τ) = 12 N·m

Radius (r) = 0.50 m

Angular acceleration (α) = 1.6

We can rewrite the torque equation as:

τ = (1/2) × m × r² × α

Substituting the given values:

12  = (1/2) × m × (0.50)² × 1.6

12  = 0.2m

m ≈ 60 kg

Therefore, the mass of the disk is approximately 60 kg.

Learn more about rotational dynamics here:

https://brainly.com/question/30703111

#SPJ12

A converging collimator  improves sensitivity as one moves away from the collimator face until one reaches the focal point, beyond which the sensitivity decreases. The correct option is B.

A converging collimator is a device used in radiation detection and imaging systems, such as nuclear medicine and gamma cameras. Its purpose is to focus and direct the incoming radiation, improving image quality.

This is because the collimator directs the incoming radiation towards the focal point, where the maximum sensitivity is achieved. However, beyond the focal point, the radiation begins to diverge, which leads to a reduction in sensitivity. Therefore, the correct answer is B.) improves sensitivity, sensitivity decreases.

To know more about focal point, refer here:

https://brainly.com/question/30761313#

#SPJ11

Complete question:

A converging collimator _____ as one moves away from the collimator face until one reaches the focal point, beyond which the _____.

A.) decreases sensitivity, sensitivity increases

B.) improves sensitivity, sensitivity decreases

C.) decreases disortion, sensitivity stays the same

D.) increases resolution, resolution decreases

Represent the airplane's airspeed as a vector. The magnitude is 345 mph, and the direction is 124 degrees (measured clockwise from due north). Let's call this vector A.

2. Represent the wind speed as a vector. The magnitude is 23 mph, and the direction is from the west, which is 270 degrees (measured clockwise from due north). Let's call this vector W.

3. Find the components of both vectors A and W. We can do this using trigonometry:

  A_x = 345 * cos(124°)
  A_y = 345 * sin(124°)

  W_x = 23 * cos(270°)
  W_y = 23 * sin(270°)

4. Add the components of vectors A and W to find the components of the groundspeed vector G:

  G_x = A_x + W_x
  G_y = A_y + W_y

5. Calculate the magnitude of the groundspeed vector G:

  Groundspeed = |G| = sqrt(G_x^2 + G_y^2)

6. Calculate the course of the airplane (the angle of vector G):

  Course = arctan(G_y / G_x)

Learn more about magnitude here : brainly.com/question/14452091

#SPJ11

To design a device that uses electromagnetic induction to detect a burglar opening a window in a ground floor apartment, you would need to create a circuit that utilizes a coil of wire and a magnetic field. The coil would be placed around the window frame, and the magnetic field would be generated by a permanent magnet.

When the window is opened, the magnetic field would be disrupted, causing a change in the electromagnetic field around the coil. This change would be detected by the circuit, which could then trigger an alarm or alert the homeowner.
The device could be designed to be battery-operated or wired into the home's electrical system. It would need to be calibrated to detect only significant changes in the electromagnetic field, so as to avoid false alarms caused by minor disturbances. Additionally, the device could be designed to include a timer or delay to give the homeowner time to disarm the device before it activates.

Overall, a device that uses electromagnetic induction to detect a burglar opening a window in a ground floor apartment could be an effective and affordable way to improve home security. By taking advantage of the principles of electromagnetic induction, it is possible to create a simple and reliable system for detecting unauthorized access to a home.
To design a device that uses electromagnetic induction to detect a burglar opening a window in your ground floor apartment, follow these steps:

1. Obtain a small induction coil, which generates an electric current when exposed to a changing magnetic field.
2. Attach a thin, flexible magnet to the edge of the window that opens, and mount the induction coil on the window frame adjacent to the magnet.
3. When the window is closed, the magnet should be in close proximity to the induction coil, creating a stable magnetic field.
4. Wire the induction coil to a microcontroller, such as an Arduino, which monitors changes in the electric current produced by the coil.
5. Program the microcontroller to trigger an alarm or notification when it detects a significant change in the current, indicating the window has been opened and the magnetic field has been disrupted.
6. Secure the device components within a discreet housing and connect the system to a power source.

This setup utilizes electromagnetic induction to sense the opening of a window in your ground floor apartment, helping to protect against potential burglars.

For more information on electromagnetic induction visit:

brainly.com/question/26334813

#SPJ11

The intensity of sunlight that reaches Jupiter is significantly less than that which reaches Earth.

The intensity of sunlight decreases as distance from the sun increases. Jupiter is located on average about 778 million kilometers (484 million miles) from the sun, which is about 5.2 times the distance between the sun and Earth. This means that the intensity of sunlight that reaches Jupiter is much lower than the 1400 W/m2 that reaches Earth's atmosphere. In fact, the intensity of sunlight that reaches Jupiter's atmosphere is only about 4% of that which reaches Earth. Therefore, the intensity of sunlight that reaches Jupiter is approximately 56 W/m2.

learn more about intensity of sunlight

https://brainly.com/question/28895397

#SPJ11

Sirius is approximately [tex]2.5^{3.9}[/tex] times brighter than Merak when observed from Earth. The apparent magnitude is a scale used to measure the brightness of celestial objects as they appear to an observer on Earth. In this scale, a lower value indicates a brighter object.

The star Merak has an apparent magnitude of 2.4, while Sirius has an apparent magnitude of -1.5. Since Sirius has a lower apparent magnitude value (-1.5) compared to Merak (2.4), Sirius appears brighter in the sky.

This difference in brightness is due to the difference in both their intrinsic luminosities and their distances from Earth. Sirius is not only intrinsically more luminous than Merak but also closer to Earth, which makes it appear even brighter. The apparent magnitude scale is logarithmic, meaning that a difference of 1 magnitude corresponds to a brightness ratio of approximately 2.5 times. In this case, the difference in magnitude between Merak and Sirius is 3.9 (2.4 - (-1.5)). Therefore, Sirius is approximately [tex]2.5^{3.9}[/tex] times brighter than Merak when observed from Earth.

Learn more about apparent magnitude here:

https://brainly.com/question/8879639

#SPJ11

The rms voltage required for a resistor to dissipate 11.5 W is 21.8 V.

The power (P) dissipated by a resistor is given by P = V²/R, where V is the voltage across the resistor and R is the resistance. We are given that the resistor dissipates 1.80 W when the rms voltage is 9.50 V, so we can write:

1.80 watt(W) = (9.50 V)²/R

Solving for R, we get:

R = (9.50 V)²/1.80 W = 49.97 Ω

To find the rms voltage required for the resistor to dissipate 11.5 W, we can use the same equation:

11.5 W = V²/49.97 Ω

Solving for V, we get:

V = √(11.5 W * 49.97 Ω) = 21.8 V

learn more about rms voltage here:

https://brainly.com/question/13507291

#SPJ11

When the values of source voltage and total current are known, the true power (P) in a series resistive-capacitive (RC) circuit can be calculated by multiplying the voltage (V) and current (I).

In an RC circuit, resistive components dissipate power as heat, while capacitive components store energy without dissipating it as heat. The true power is only associated with the resistive components of the circuit.

To calculate the true power in an RC circuit, you can use the formula P = V x I, where P is the true power, V is the source voltage, and I is the total current flowing through the circuit. The true power is measured in watts (W), voltage is measured in volts (V), and current is measured in amperes (A).

Keep in mind that this calculation will provide the power only for the resistive components of the circuit, not the capacitive components. It is essential to understand the difference between the two types of components and their effects on power dissipation and energy storage in a series RC circuit.

To know more about voltage, refer here:

https://brainly.com/question/2364325#

#SPJ11

Complete question

When the values of source voltage and total current are known,____ in a series resistive-capacitive circuit can be calculated by multiplying the voltage and current.

An air parcel undergoes an adiabatic process when there is no exchange of heat between the air parcel and the environment (option a).

An adiabatic process is one in which there is no exchange of heat between the system and the surroundings. In the case of an air parcel, this means that the parcel is not gaining or losing heat from its environment.

This process can occur under a variety of conditions, including when the temperature remains constant, the pressure remains constant, or the relative humidity remains constant.

However, the defining characteristic of an adiabatic process is the lack of heat exchange, so this is the most important factor to consider when identifying an adiabatic process in an air parcel.

Thus, the correct choice is (a) There is no flow of heat across the environment and the air parcel.

For more such questions on heat, click on:

https://brainly.com/question/934320

#SPJ11

"Vehicles must have at least one rearview mirror which gives a view of the highway at least 200 feet to the rear.

According to the Code of Federal Regulations (CFR), all motor vehicles, except motorcycles, must be equipped with at least one rearview mirror that provides a view of the highway to the rear of the vehicle.

The mirror must be positioned to reflect a view of the highway at least 200 feet to the rear of the vehicle, and it must be adjusted to provide a clear and undistorted view of the roadway behind the vehicle.

The purpose of requiring a rearview mirror in motor vehicles is to improve safety by providing drivers with a clear and unobstructed view of the roadway behind them. This allows them to monitor traffic and make decisions about changing lanes, merging, turning, and other maneuvers.

Without a rearview mirror, drivers would be forced to rely solely on their side mirrors and turning their heads to look over their shoulders, which can be dangerous and impractical in some situations.

Know more about rearview mirror here:

https://brainly.com/question/30207022

#SPJ11

The time it takes for the  is equal to the period of the star's wobbling motion. In this case, since one wobble of the star takes 11 years, it can be inferred that the planet's orbital period is also 11 years.

In an extrasolar planetary system with a single planet, the observed wobble of the star is due to the gravitational interaction between the star and the planet. The star's wobble period, which is 11 years in this case, directly corresponds to the planet's orbital period. Therefore, it takes the planet 11 years to orbit its star.

More on planet/stars: https://brainly.com/question/11394962

#SPJ11

The most plausible explanation for the large radius of HAT-P-32b is that it is a gas giant with a low density and has been tidally inflated by its close proximity to its star.

The most plausible explanation for the large radius of the planet HAT-P-32b is that it is a gas giant with a low density. This means that the planet is not composed of a solid surface, but rather of gas and other materials in a thick atmosphere that extends outwards.

Gas giants like Jupiter and Saturn have low densities due to their composition, which is mostly hydrogen and helium gas. The gravitational pull of the planet is not strong enough to compress the gas into a solid surface, so the planet instead takes on a large, gaseous shape.

HAT-P-32b is also a gas giant, with a mass similar to that of Jupiter but a much larger radius. This indicates that it is likely composed of similar materials to Jupiter, and has a similarly low density.

Know more about density here:

https://brainly.com/question/29775886

#SPJ11

The wave speed on a string under tension is 250 m/s. 125 m/s is the speed if the tension is halved.

Given that it depends on the square root of the tension, the wave's speed is twice. The velocity of perpendicular motion is controlled by tension, which also regulates the vertical force exerted on string molecules perpendicular to wave motion.

The wave's velocity can be calculated using the linear density and tension [tex]V=FT[/tex]. The tension would need to be increased by a factor of 20 in accordance with the equation [tex]V=FT[/tex] for the linear density to nearly double.

The following factors affect the wave:

If the tension on the string is halved, the wave speed will also decrease. The relationship between wave speed and tension is linear, which means that if the tension is reduced by half, the wave speed will also be reduced by half. Therefore, the new wave speed will be:
250 m/s ÷ 2 = 125 m/s
So, if the tension is halved, the wave speed on the string will be 125 m/s. The units for wave speed are typically meters per second (m/s).

Learn more about speed  here

https://brainly.com/question/28565740

#SPJ11

Answer:

Approximately 3.789 light years, rounded up from 3.7886325633462.

Explanation:

The Coma Cluster is a place without wired internet, so it would take the speed of light times 6.826732 to get you answer of 3.7886325633462.

In terms of power sources that are available at the scene and lightweight, one option would be battery-powered tools.

Learn more about battery at: https://brainly.com/question/26466203

#SPJ11

The net force on the particle was 2.2 N.

To find the magnitude of the net force, we can use the formula:

F = m * a

where F is the net force, m is the mass of the particle, and a is the acceleration.

The particle is moving in circular motion, so its acceleration is given by:

a = v^2 / r

where v is the speed of the particle and r is the radius of the circle.

At the instant when the particle was slowing down, its speed was 3.4 m/s, so its acceleration was:

a = (3.4 m/s)^2 / 2.3 m = 5.04 m/s^2

The mass of the particle is given as 400 g, which is 0.4 kg.

Substituting these values into the formula for net force, we get:

F = (0.4 kg) * (5.04 m/s^2) = 2.02 N

Therefore, the magnitude of the net force on the particle was 2.02 N, which is approximately equal to 2.2 N.

Learn more about circular motion here:

https://brainly.com/question/2285236

#SPJ11

The dog has a higher rotational velocity than the boy.

The rotational velocity of the boy sitting near the center of the rotating merry-go-round is much smaller than that of the dog sitting near the edge of the same merry-go-round.

This is because the rotational velocity of an object on a merry-go-round is directly proportional to the distance of the object from the center of rotation. In other words, the farther away an object is from the center of rotation, the faster it moves.

Since the dog is sitting near the edge of the merry-go-round, it is farther away from the center of rotation than the boy, who is sitting near the center.

Therefore, the dog has a higher rotational velocity than the boy.

This difference in rotational velocity can also be seen in the fact that the dog has to travel a greater distance than the boy to complete one full rotation around the center of the merry-go-round.

Learn more about rotational velocity

brainly.com/question/26095104

#SPJ11