Answer:
false
Explanation:
Write the acid-base reaction between the weak base ammonia NH3 and the strong acid hydrochloric acid HCL.
Answer:
HCl + NH₃ → NH₄⁺ + Cl⁻
Explanation:
When a strong acid as HCl reacts with a weak base as NH₃ a salt that comes from the conjugate acid, NH₄⁺, and the ion of the acid, Cl⁻, is produced as follows:
HCl + NH₃ → NH₄⁺ + Cl⁻This is the acid- base reaction
The base captures the proton of the acid (proton aceptor) and the acid give the proton (Proton donor)
The simplest method to convert an alcohol to an alkyl halide is by reacting the alcohol with concentrated HCl, HBr, or HI. Complete the mechanism and draw the intermediates and final products for the reaction of 1,3-dimethylcyclohexanol with concentrated HCl. Draw all missing reactants and/or products in the appropriate boxes by placing atoms on the grid and connecting them with bonds, including charges where needed. Indicate the mechanism by drawing the electron-flow arrows on the molecules. Arrows should start on an atom or a bond and should end on an atom, bond, or where a new bond should be created.
Answer:
B ska Uffculme u to quell torso
4. How many grams of acetylene would be given off if the limiting reagent in the reaction is calcium carbide and you start with 2.00 g
Answer:
0.78 g of acetylene.
Explanation:
The equation of the reaction is;
CaC2(s) + 2H2O (l) ------> Ca(OH)2(aq) + C2H2(g)
We have been told that CaC2 is the limiting reactant.
Number of moles of CaC2 = 2g/ 64 g/mol = 0.03 mol
If 1 mole of CaC2 yields 1 mole of acetylene
0.03 moles of CaC2 yields 0.03 moles of acetylene
Mass of acetylene = number of moles * molar mass
Molar mass of acetylene = 26 g/mol
Mass of acetylene = 0.03 moles * 26 g/mol
Mass of acetylene = 0.78 g of acetylene.
What percent of iodine is left after 5 half-lives have passed? will brainlist
Answer:
3.125%
Explanation:
After 1 half life it remains 50%
After 2 half lines it remains 25%
After 3 half lines it remains 12.5 %
After 4th half life it remains 6.25%
After 5th half life it remains 3.125%
the laywer loves mint tea, but all she has in mint oil. is this a good choice to add to make mint tea? why or why not?
Answer:
it is
Explanation:
i think all you have to do is add mint oil to boiling hot water and you get mint tea i guess
The accepted density of water at 25oC is 0.99707 g/mL. Calculate the percent error forbothBeakers A and B.
Answer:
Percent error for beaker A is 0.26%
Percent error for beaker B is 0.25%
Explanation:
The remaining part of the question is shown in the attachment below.
For beaker A
Mass of water = 9.997 g
Volume = 10mL
First, we will determine the experimental density
From
Density = Mass / Volume
∴ Density = 9.997g / 10mL
Density = 0.9997 g/mL
To calculate the percent error
Percent error = (Error/True value) × 100%
Error = Experimental value - True value
From the question, True value = 0.99707 g/mL
Experimental value = 0.9997 g/mL
∴ Error = 0.9997 g/mL - 0.99707 g/mL
Error = 0.00263 g/mL
Then,
Percent error = (0.00263/0.99707) × 100%
Percent error = 0.26377%
Percent errror ≅ 0.26%
Hence, percent error for beaker A is 0.26%
For beaker B
Mass of water = 9.9956 g
Volume = 10mL
Also, we will first determine the experimental density
From
Density = Mass / Volume
∴ Density = 9.9956g / 10mL
Density = 0.99956 g/mL
To calculate the percent error
Percent error = (Error/True value) × 100%
Error = Experimental value - True value
True value = 0.99707 g/mL
Experimental value = 0.99956 g/mL
∴ Error = 0.99956 g/mL - 0.99707 g/mL
Error = 0.00249 g/mL
Then,
Percent error = (0.00249/0.99707) × 100%
Percent error = 0.24973%
Percent errror ≅ 0.25%
Hence, percent error for beaker B is 0.25%
Some organisms are composed of only ONE cell. *
O True
O false
Which choice best describes what would happen if a cube with a density of 0.2 g/mL were placed in a container of water?
A. It would float with about 80% of the cube below the surface of the water and 20% above the surface.
B. It would float with about 20% of the cube below the surface of the water and 80% above the surface.
C. It would sink to the bottom.
D. It would fly away.
Answer:
A. It would float with about 80% of the cube below the surface of the water and 20% above the surface.
Explanation:
The choice that best describes what happens to cube of the given density value is that it would float with about 80% of the cube would be below the surface of the water and 20% above the surface.
Density is the mass per unit volume of a substance. The more mass a body has relative to volume, the great it's density. In short, density is directly proportional to mass and inversely related to volume.
The density of water is 1g/mL
If the density of the cube were to be the same with that of water, the substance will just mix up with water .
Here the density is less than that of water.
The density is 0.2g/mL
Therefore, 20% will stay afloat and 80% will be below the surface of the water.
if kept at a constant temperature, what is the concentration at 865s if the initial concentration was 0.0225M
Answer:
[tex][SO_2Cl_2]=0.0175M[/tex]
Explanation:
Hello!
In this case, considering that the decomposition reaction of SO2Cl2 is first-order, we can write the rate law shown below:
[tex]r=-k[SO_2Cl_2][/tex]
We also consider that the integrated rate law has been already reported as:
[tex][SO_2Cl_2]=[SO_2Cl_2]_0exp(-kt)[/tex]
Thus, by plugging in the initial concentration, rate constant and elapsed time we obtain:
[tex][SO_2Cl_2]=0.0225Mexp(-2.90x10^{-4}s^{-1}*865s)[/tex]
[tex][SO_2Cl_2]=0.0175M[/tex]
Best regards!
HELP ME PLEASE !!!!!!
Answer:
1 gram of the substance
Explanation:
You have to put grams in the denominator, so they cancel out and leave you with moles
What is the mass of 4.5 x 10^22 molecules of hydrogen peroxide (H2O2)? Show your work in the space below.
Given :
Number of molecules of hydrogen peroxide, N = 4.5 × 10²².
To Find :
The mass of given molecules of hydrogen peroxide.
Solution :
We know, 1 mole of every compound contains Nₐ = 6.022 × 10²³ molecules.
So, number of moles of hydrogen peroxide is :
[tex]n = \dfrac{N}{N_a}\\\\n = \dfrac{4.5\times 10^{22}}{6.022\times 10^{23}}\\\\n = 0.0747 \ moles[/tex]
Now, mass of hydrogen peroxide is given as :
m = n × M.M
m = 0.0747 × 34 grams
m = 2.54 grams
Hence, this is the required solution.
48,000,000,000 g scientific notation
Answer:
We want to express it in scientific notation.
We will count how many places to the left we move We utilize scientific notation to simplify calculation Hence we move 10 to the left Our answer is 4.8 × 10^10Why is heat needed to get a reaction to occur
Answer:As temperature increases, reactions take place. Generally, higher temperatures mean faster reaction rates; as molecules move about more quickly, reactant molecules are more likely to interact, forming products.
Explanation:
Answer:
Endothermic and Exothermic Reactions
Many familiar chemical reactions, such as the burning of coal, rusting and exploding gunpowder, give off heat; chemists call these reactions exothermic. Because reactions liberate heat, they increase the ambient temperature.
Plz help me I am timed
The Great Plains are also referred to as
a. marshes
b. lowlands
c. interior plains
d. plateaus
Answer:
C. interior plains
Explanation:
sana makatulong
Answer:
interior plains
Explanation:
edge 2021
What causes a spectrum of colors to appear when light moves through a prism?
Absorption of light waves
O Refraction of light waves
Transmission of light waves
Reflection of light waves
Answer:
It is refracted out, B
Explanation:
When the light travels through the prism, it refracts the colors out of it. In which a rainbow sort coloration is released from the other side.
Answer:
Explanation:
Refraction of light waves
Describe how the energy in ocean waves could be transformed into electrical energy.
Answer:
ocean waves are converted to electricity with wave energy converter, or WEC, devices. ... The surface portion moves faster than the submerged part, and the WEC converts that relative motion into electricity
The energy in ocean waves that should be transformed into electrical energy is because of Buoyant objects.
Energy in ocean waves transformation:Buoys and turbines should be considered as the two examples of devices that can be used to capture the energy from the ocean's movement.
Buoys are considered to be structures that float on the sea and move up and down with the motion of the waves.
Learn more about energy here; https://brainly.com/question/17172186
Based on the context in paragraph 4 fossils refers to
Answer:
i am not sure i am really just doing it for the points but yea
Explanation:
im just ok lol i wish you guys the best
Answer:
shtfu
Explanation:
If a soccer ball has a mass of 0.43 kg and radius of approximately 22 cm, calculate the density of the soccer ball in g/cm? (V. = (4/3)Arº) sphere
Answer: 0.0096g/cm^3
Explanation: density = mass/1.33*pi*r^3
Chloroform has a density of 1.483g/ml. A sample of chloroform has a volume of 1.93 liters. How many kilograms does it weight?
Weight of Chloroform : = 2.862 kg
Further explanationGiven
Density 1.483 g/ml
Volume = 1.93 L
Required
Weight of Chloroform
Solution
Density is a quantity derived from the mass and volume
Density is the ratio of mass per unit volume
Density formula:
[tex]\large {\boxed {\bold {\rho ~ = ~ \frac {m} {V}}}}[/tex]
ρ = density
m = mass
v = volume
Convert density to kg/L :
=1.483g/ml = 1.483 kg/L
So the weight(mass) :
= ρ x V
= 1.483 kg/L x 1.93 L
= 2.862 kg
HELP PLEASEEEE I BEG
1. What are at least 3 effects of the oceanic plate/continental plate convergent boundary?
2. Where can you find an example of this type of convergent boundary? Which country, continent, or ocean?
Answer 1: The correct answer is b. convergent continental-continental boundary.
A convergent continental-continental boundary refers to a convergent plate boundary where two continental plates meet or come together. When this happens, a forceful collision occurs, and structures like mountains start to form. The Himalaya mountain range is formed as a result of the convergence of the Indian and Eurasian continental plates.
Answer 2: The correct answer is d. convergent oceanic-oceanic boundary.
Volcanic island arcs refers to a curved line of volcanoes formed from the subduction (sinking) of one oceanic plate below another plate. Examples of volcanic island arcs include Japanese Islands and Alaskan Islands.
Answer 3: The correct answer is b.convergent oceanic-continental boundary.
A continental volcanic arc is an arc-shaped chain of volcanoes that form from the subduction of an oceanic plate under a continental plate.
5/10
When you put sodium metal in liquid ammonia, what is the
intermolecular' attraction between Nations and NH3
molecules?
a Covalent bonds
Answer: ion dipole
Explanation: ck-12 said it was correct
You want to know how many moles of gas your lungs can hold. You start off with a balloon that has 1.4 moles of gas and occupies 22.4L. You then blow all the air from your lungs into the balloon. The balloon now occupies 28.4L. How many moles of gas did you blow into the balloon.
A) 1.775 moles
B) .0013 moles
C) 43.56 moles
D) 2,654 moles
Number of moles : n₂ = 1.775 moles
Further explanationGiven
Moles = n₁ = 1.4
Volume = V₁=22.4 L
V₂=28.4 L
Required
Moles-n₂
Solution
Avogadro's hypothesis, at the same temperature and pressure, the ratio of gas volume will be equal to the ratio of gas moles
The ratio of gas volume will be equal to the ratio of gas moles
[tex]\tt \dfrac{V_1}{V_2}=\dfrac{n_1}{n_2}[/tex]
Input the values :
n₂ = (V₂ x n₁)/V₁
n₂ = (28.4 x 1.4)/22.4
n₂ = 1.775 moles
What is the mass of 1.20 x 1024 atoms of potassium?
Answer:
77.9 g
explanation:
Answer: 77.9 g
Explanation:
What type of intermolecular force tightly attracts
the gecko's feet to the surface it walks on?
o covalent bonding
O hydrogen bonding
O ionic bonding
Van der Waals forces
Answer Van der Waals Forces
Explanation:
right on EDGE 2021
Gecko's feet easily adhere to the wall and floor by the Van der Waals forces of attraction between the surface and its feet. Thus option d is correct.
What is Van der Waals force?Van der Waals force is a kind of intermolecular attractive force between two particles which is comparatively weaker than other forces like dipole force, covalent and ionic force.
Because of the minute hair-like projections on the underside of their feet, geckos are renowned for being skilled climbers. Studies revealing that they are coated with an ultra-thin layer of lipid molecules in an upright orientation.
Each of those minuscule hairs, known as setae, breaks off into hundreds of even smaller bristles, or spatulae. It has long been understood that the so-called van der Waals forces, or the attractive and repulsive forces between two dipole molecules, become important at microscopic size scales.
To find more on intermolecular forces, refer here:
https://brainly.com/question/17111432
#SPJ2
can u pls help me with this question
i think its volume but im not 100% sure
Answer:
D.
Explanation:
cuz liter is volume
Determine the number of atoms in the following chemical formula: 3Mg(OH4)2
A. 33
B. 30
C. 13
D. 19
The number of atoms : 33
Further explanationGiven
The chemical formula: 3Mg(OH₄)₂
Required
The number of atoms
Solution
The chemical formula of a compound shows the mole ratio and the number of each of its constituent components (number of atoms)
Usually, the ratio of the elements in a compound is indicated by their subscript number after the monoatomic or polyatomic in the compound
While the coefficient in front of the compound indicates the number of molecules
In the chemical formula 3Mg (OH₄) ₂, there are 3 molecules of Mg (OH₄) ₂, so the number of atoms of the elements:
Mg = 3
O = 3 x 2 = 6
H = 3 x 4 x 2 = 24
Total atoms = 3 + 6 + 24 = 33
The forensic technician at a crime scene has just prepared a luminol stock solution by adding 10.0 g of luminol into a total volume of 75.0 mL of H2O . What is the molarity of the stock solution of luminol
Answer:
0.753M
Explanation:
Molecular formula of luminol is as follows: C8H7N3O2
Molecular formula of the luminol (C8H7N3O2) = 12(8) + 1(7) + 14(3) + 16(2)
= 96 + 7 + 42 + 32
= 177g/mol
mole of luminol = mass/molar mass
mole = 10 ÷ 177
mole = 0.0565 mol
Molarity can be calculated using the formula: Molarity = mol/volume (L)
Volume of water = 75.0 mL = 75/1000
= 0.075L
Molarity (M) = 0.0565 ÷ 0.075
The molarity of the stock solution = 0.753M
if mixture didn't exist how would life be different
PLEASEEE QUICKKKK
Answer:
boring
Explanation:
without meaning
Which statement best describes how photosynthesis follows the law of conservation of mass?
O The volume of water used by this process is equal to the volume of water released from plant leaves at night.
O The cells in plants absorb the same amount of energy from the Sun that humans need when burning sugars during digestion.
O The number of oxygen atoms in the reactants used by this process equals the total number of oxygen atoms in the products.
The amount of carbon dioxide gas absorbed by one plant is equal to the amount of carbon dioxide gas exhaled from one human,
11
Preston
Answer:
O The number of oxygen atoms in the reactants used by this process equals the total number of oxygen atoms in the products.
Explanation:
The statement that best describes how photosynthesis follows the law of conservation of mass is that the number of oxygen atoms in the reactants used by this process is equal to the total number of oxygen atoms in the products.
The equation of photosynthesis reaction is given as:
6CO₂ + 6H₂O → C₆ H₁₂ O₆ + 6O₂
According to the law of conservation of mass, matter is neither created nor destroyed during the course of a chemical reaction.
By the virtue of this, the number of oxygen atom on both sides of the expression must be the same. Also, the number of carbon and hydrogen atoms must also be the same.