♫
La edad del padre de Dylan es actualmente el cuadrado de la edad de Dylan. Si Dylan tiene 6 años, ¿cuántos años tiene su papá?

(a) The probability that the system functions on a rainy day is the probability that at least 4 out of the 6 components function, with each component having a probability of 0.7 of functioning.

We can calculate this probability using the binomial distribution:

P(system functions on a rainy day) = P(X ≥ 4), where X ~ Binomial(n=6, p=0.7)

Using a calculator or statistical software, we find:

P(system functions on a rainy day) = 0.8482

(b) The probability that the system functions on a non-rainy day is the probability that at least 4 out of the 6 components function, with each component having a probability of 0.9 of functioning. Again, we can use the binomial distribution:

P(system functions on a non-rainy day) = P(X ≥ 4), where X ~ Binomial(n=6, p=0.9)

Using a calculator or statistical software, we find:

P(system functions on a non-rainy day) = 0.9970

(c) To find the probability that the system will function tomorrow, we need to use the law of total probability. Let R be the event that it rains tomorrow and NR be the event that it doesn't rain tomorrow. Then:

P(system functions tomorrow) = P(system functions on a rainy day)P(R) + P(system functions on a non-rainy day)P(NR)

Using the probabilities from parts (a) and (b), and the fact that P(R) = 0.2 and P(NR) = 0.8, we can calculate:

P(system functions tomorrow) = (0.8482)(0.2) + (0.9970)(0.8) = 0.9746

Therefore, the probability that the 4 out of 6 systems will function tomorrow is 0.9746, assuming a 0.2 probability of rain.

For more questions like Probability click the link below:

https://brainly.com/question/30034780

#SPJ4

Answer:

Comparing this to the volume of the cube when the side length is 3 cm, which is 27 cm^3, we can see that the volume of the cube is greater than the volume of the cylinder.

Step-by-step explanation:

I'm sorry, but I cannot see the graph you are referring to. However, I can still answer some of your questions based on the information provided.

When the diameter of the cylinder is 2 cm, the radius is equal to half the diameter, which is 1 cm.

To express the volume of a cube of side length s as an equation, we use the formula for the volume of a cube:

Volume of cube = s^3

Making a table for the volume of the cube at different side lengths, we get:

Side Length (cm) Volume (cm^3)

        0                                    0

        1                                     1

        2                                     8

        3                                     27

To compare the volume of the cube when the side length is 3 cm and the volume of the cylinder when the diameter is 3 cm, we need to find the radius of the cylinder first.

When the diameter is 3 cm, the radius is half the diameter, which is 1.5 cm. The height of the cylinder is also equal to the radius, so the volume of the cylinder can be found using the formula:

Volume of cylinder = πr^2h

Substituting r = 1.5 cm and h = 1.5 cm, we get:

Volume of cylinder = π(1.5)^2(1.5) ≈ 10.602 cm^3

Comparing this to the volume of the cube when the side length is 3 cm, which is 27 cm^3, we can see that the volume of the cube is greater than the volume of the cylinder.

Answer: To find the selling price of the karaoke machine with a 49.5% markup, you need to first calculate the amount of the markup. You can do this by multiplying the cost of the machine (52.75) by the markup rate (49.5%) expressed as a decimal:

52.75 * 0.495 = 26.067375

Next, add this markup amount to the cost of the machine:

52.75 + 26.067375 = 78.817375

So, the selling price of the karaoke machine with a 49.5% markup would be $78.82.

Step-by-step explanation:

Accumulated depreciation account is used to calculate an asset's net book value, which is the value of an asset carried on the balance sheet.

The accumulated depreciation account is a contra asset account on a company's balance sheet. It represents a credit balance. It appears as a reduction from the gross amount of fixed assets reported. Accumulated depreciation specifies the total amount of an asset's wear to date in the asset's useful life.

One of the uses of accumulated depreciation account is that is used to calculate an asset's net book value, which is the value of an asset carried on the balance sheet.

learn more about accumulated depreciation account from

https://brainly.com/question/15610334

#SPJ1

Answer:

The example that demonstrates the greatest distance traveled is Brenan diving to a depth of -12.76 feet, as it has the highest absolute value.

Answer:

Step-by-step explanation:

14.0

Answer:

[tex]x=11.5[/tex]

The third option listed

Step-by-step explanation:

We can use the sine function to evaluate [tex]x[/tex].

The definition of the sine function is

[tex]\sin \theta=\frac{O}{H}[/tex]

Note

[tex]\theta[/tex] is the angle

[tex]O[/tex] is the side opposite to the angle

[tex]H[/tex] is the hypotenuse

In this example we are given the hypotenuse and the angle.

Knowing these 2 values we can evaluate the opposite side ([tex]x[/tex]).

Lets solve for [tex]O[/tex].

[tex]\sin \theta=\frac{O}{H}[/tex]

Multiplying both sides by [tex]H[/tex] lets us isolate [tex]O[/tex] ([tex]x[/tex]).

[tex]O=H*\sin \theta[/tex]

Numerical Evaluation

We are given

[tex]\theta=35\textdegree\\H=20[/tex]

Inserting those values into our equation for [tex]O[/tex] ([tex]x[/tex]) yields

[tex]O=20*\sin 35[/tex]

[tex]O=11.4715287[/tex]

Rounding to the nearest tenth gives us

[tex]O=11.5[/tex]

[tex]x=11.5[/tex]

Learn more about sine and the other trig functions here

brainly.com/question/13470102

The expression representing the perimeter of the rectangle is given as follows:

P = 6x + 4.

The perimeter of the rectangle when x = 7 is given as follows:

46 feet.

The perimeter of a rectangle of length l and width w is given by the expression presented as follows:

P = 2(l + w).

The dimensions for this problem are given as follows:

Hence the expression for the perimeter of the rectangle is given as follows:

P = 2(x + 4 + 2x - 2)

P = 2(3x + 2)

P = 6x + 4.

When x = 7, the perimeter of the rectangle is given as follows:

P = 6(7) + 4

P = 46 feet.

More can be learned about the perimeter of a rectangle at https://brainly.com/question/24571594

#SPJ1

The missing angles in triangle RST and LMN are 121° and 15° respectively.

When two straight lines or rays intersect at a single endpoint, an angle is created.

The vertex of an angle is the location where two points come together.

The Latin word "angulus," which means "corner," is where the term "angle" originates.

Angle position describes how a line interacts with another line or plane. The amount of rotation of the body relative to the reference position is used to calculate the angle of position.

Theta (), the sign used to represent the angular position, can represent the angle in degrees (°), radians (rads), or revolutions.

So, in the triangle RST:

Missing angle:

44 + 15 + x = 180

x = 180 - 59

x = 121°

In triangle LMN:

121 + 44 + x = 180

x = 180 - 165

x = 15°

Therefore, the missing angles in triangle RST and LMN are 121° and 15° respectively.

Know more about angles here:

https://brainly.com/question/25716982

#SPJ1

Answer:

Step-by-step explanation:

Answer:

False, No.

Step-by-step explanation:

No, it is not possible to create a regular tessellation with a regular heptagon. A regular tessellation, also known as a tiling, is a repeating pattern of identical regular polygonal shapes that cover a plane without any gaps or overlaps. The only regular polygonal shapes that can be used to form a regular tessellation are the equilateral triangle, square, and hexagon. These shapes have interior angles that are multiples of 60 degrees, which allows them to fit together seamlessly to form a repeating pattern. The interior angle of a regular heptagon is roughly 128.5714 degrees, which does not divide evenly into 360 degrees, so it cannot be used to form a regular tessellation.

The angle measure of x, y and z are 104, 76 and 104 degrees respectively

The given. figure is a parallelogram with 4 interior angles. In a parallelogram, the sum of its adjacent angle is 180 degrees and its opposite angles are equal.

<A = <C

x = 104 degrees

For the measure of y:

x + y = 180

104 + y = 180

y = 180 - 104

y = 76 degrees

Since the sum of angles on a straight line is 180 degrees, hence;

y + z = 180

76 + z = 180

z = 104 degrees

Hence the measure of x, y and z are 104, 76 and 104 degrees respectively

Learn more on parallelograms here: https://brainly.com/question/14285697

#SPJ1

Out of a population of 100,000, the number of people who read at least two newspapers is = 33,000.

Let's approach this problem using the inclusion-exclusion principle.

First, we can add up the proportions of people who read each paper to get:

P(I) + P(II) + P(III) = 10% + 30% + 5% = 45%

However, this includes the people who read two or more papers multiple times, so we need to subtract those out. We can calculate these as follows:

P(I&II) + P(I&III) + P(II&III) = 8% + 2% + 4% = 14%

2P(I&II&III) = 2%

Using the inclusion-exclusion principle, we can now find the proportion of people who read at least two papers:

P(at least 2 papers) = P(I) + P(II) + P(III) - (P(I&II) + P(I&III) + P(II&III)) + 2P(I&II&III)

Plugging in the values, we get:

P(at least 2 papers) = 45% - 14% + 2% = 33%

So, the number of people who read at least two newspapers is:

0.33 * 100,000 = 33,000

To learn more about proportions click on,

https://brainly.com/question/30529860

#SPJ4

Complete question is:

A certain town of population size 100,000 has three newspapers: I , II and III the proportions of townspeople that read these papers are:  

I= 10 percent

II= 30% percent

II=5 percent

I&II=8 percent

I&III=2 percent

II&III=4 percent

I&II&III=1 percent

How many people read at least two newspapers?

The integral that would give the volume V generated by rotating the region bounded by the given curves about the y-axis is V = ∫[from x=0 to x=6] π[(13 - x²/3)² - 13²]dx

To find the volume of a rotational solid, we can use the method of disks/washers, which involves slicing the solid into thin disks or washers, calculating the volume of each slice, and then adding them up using integration.

To use the method of disks/washers, we need to first determine the radius of each disk or washer. Since we're rotating the region around a horizontal line, the radius will be the distance from each point on the curve to the line of rotation, which in this case is y = 16. To find this distance, we subtract 16 from the y-coordinate of each point on the curve.

The outer radius is the distance from the point on the curve y = x^2/3 + 3 to the line y = 16, which is

=>  r = 16 - (x²/3 + 3) = 13 - x²/3.

The inner radius is the distance from the point on the curve y = 3 to the line y = 16, which is

=> r = 16 - 3 = 13.

Next, we need to express the volume of each disk or washer in terms of these radii.  This gives us the following formula for the volume of each slice:

dV = π[(13 - x²/3)² - 13²]dx

Finally, we can find the total volume of the solid by integrating over the range of x values that define the region we're rotating:

V = ∫[from x=0 to x=6] π[(13 - x²/3)² - 13²]dx

Evaluating this integral will give us the volume of the solid created by rotating the region between y = x²/3 + 3  and y = 3 about the line y = 16.

To know more about volume here.

https://brainly.com/question/11168779

#SPJ4

Complete Question:

Set up the integral that uses the method of disks/washers to find the volume V of the solid obtained by rotating the region bounded by the given curves about the specified lines. y = x²/3 + 3 , y = 3 , x = 6 About the line y = 16.

Answer:

We can use the formula speed = distance / time to calculate the speed of the plane.

The total distance traveled by the plane is 3,000 + 600 = 3,600 miles.

The total time taken by the plane is 2 hours 30 minutes, which is equivalent to 2.5 hours.

Therefore, the speed of the plane is:

speed = distance / time

     = 3,600 / 2.5

     = 1,440 miles per hour

So the answer is (A) 1440mph

This question is about to determine the conditional statement,  proposition and either that is true or false.

The explanation of each part in this question is given below:

a) The given proposition can be written as the conjunction of two conditional statements as follows:

If a = 2 (mod 8), then [tex](a^2 + 4a) = 4 (mod 8)[/tex].

If [tex](a^2 + 4a) = 4 (mod 8)[/tex], then a = 2 (mod 8).

b) To prove the first conditional statement, assume a = 2 (mod 8). Then, there exists an integer k such that a = 8k + 2. Substituting this value of a into [tex](a^2 + 4a)[/tex], we get:

[tex]a^2 + 4a = (8k + 2)^2 + 4(8k + 2) = 64k^2 + 36k + 8[/tex]

Reducing this expression modulo 8, we get:

a^2 + 4a ≡ 64k^2 + 36k + 8 ≡ 0 + 4k + 0 ≡ 4 (mod 8)

Therefore, we have shown that if a = 2 (mod 8), then (a^2 + 4a) = 4 (mod 8).

To prove the second conditional statement, assume (a^2 + 4a) = 4 (mod 8). Then, there exists an integer k such that (a^2 + 4a) = 8k + 4. Substituting this value of (a^2 + 4a) into the equation a^2 + 4a - 8k = 0, we can use the quadratic formula to solve for a:

a = (-4 ± √(16 + 32k))/2 = -2 ± √(4 + 8k)

Since a is an integer, it follows that √(4 + 8k) must be an integer as well. This implies that 4 + 8k is a perfect square. The only perfect squares that are congruent to 4 (mod 8) are those of the form 8m + 4 for some integer m. Therefore, we have:

4 + 8k = 8m + 4

k = m

Substituting k = m back into the expression for a, we get:

a = -2 + √(4 + 8k) = -2 + √(8m + 4) = -2 + 2√(2m + 1)

Since a is an integer, it follows that √(2m + 1) must be an integer as well. This implies that 2m + 1 is a perfect square. The only perfect squares that are congruent to 1 (mod 8) are those of the form 8n + 1 for some integer n. Therefore, we have:

2m + 1 = 8n + 1

m = 4n

Substituting m = 4n back into the expression for a, we get:

a = -2 + 2√(2m + 1) = -2 + 2√(8n + 1) = 2(√(2n + 1) - 1)

Therefore, we have shown that if (a^2 + 4a) = 4 (mod 8), then a = 2 (mod 8).

Since both conditional statements have been proven, the given proposition is true.

(c) The given proposition is true, as shown in the proofs of the two conditional statements in part (b).

You can learn more about conditional statements at

https://brainly.com/question/1542283

#SPJ4

The values missing sides of the figures are calculated below.

The scale factor is the size by which the shape is enlarged or reduced. It is used to increase the size of shapes like circles, triangles, squares, rectangles, etc.

NUMBER 7

Scale factor is the ratio of two corresponding sides of similar figures. Since the scale factor from A to B = 3:5. We have:

A : B = 3:5

(x+11) : 30 = 3 : 5

(x+11) /30 = 3 / 5

x + 11 = (30*3)/5

x + 11 = 90/5

x + 11 = 18

x = 18 - 11

x = 7

NUMBER 8

(2x-12) : 12 = 1:3

(2x-12) /12 = 1/3

2x-12 = 12/3

2x-12 = 4

2x = 4 + 12

2x = 14

x = 14/2

x = 7

NUMBER 9

AB : FG = BC:GH

104/39 = 112/x

x = 42

NUMBER 9

TK:KL = KU:KM

14/91 = 12/x

x = 78

Learn more about scale factor on:

brainly.com/question/20914125

#SPJ1

Answer:

The United States form of government is a...

O Republic

can I please get the five points:)

Answer:

Republic

Step-by-step explanation:

Option B

I hope this helps :) if not let me know

Answer:

8

Step-by-step explanation:

plug in the values of x and y into the equation

4(4) / (2)

16 / 2 = 8

The lengths of the missing sides associated with geometric systems formed by similar triangles are listed below:

Case 10: 49

Case 12: 36

In this problem we have the case of two geometric systems formed by two similar right triangles. These figures are similar if they have congruent internal angles but their sides are not congruent though proportional. Hence, missing sides can be found by proportion formulas. Now we proceed to determine the missing side for each case:

Case 10

x / 7√33 = 7√33 / 33

x = 7²

x = 49

Case 12

x / 6√13 = 6√13 / 13

x = 6²

x = 36

To learn more on similar triangles: https://brainly.com/question/25882965

#SPJ1

Susan could save 10.4 minutes getting to class each morning if she were to ride the bike.

As per the data given:

The distance is given between the school and the apartment = 1.3 miles

Susan's walking speed = 3 miles/hr

Now we know that speed = distance ÷ time

Putting values in the above formulae, we get the time for walking situation

3 miles/hr = 1.3 ÷ time

Time = 1.3 ÷ 3 miles

Time = (13 ÷ 30 )hr

= (13 ÷ 30) × 60 minutes

= 13 × 2

= 26 minutes

The time taken when she is walking is 26 minutes.

Here we have to determine how many minutes could Susan save getting to class each morning if she were to ride the bike.

Now if she uses a bike, the speed is 5 miles/hr

Again applying same formulae speed = distance ÷ time

5 miles/hr= 1.3 ÷ time

Time= 1.3 ÷  5 miles

= (13 ÷ 50)hr

= (13 ÷ 50) × 60 minutes

= 15.6 minutes

Time taken by bike is 15.6 minutes

Total time saved = time taken when walking - time taken using the bike

= 26 - 15.6

= 10.4 minutes

Hence, Susan could save 10.4 minutes if she uses a bike.

For more questions on speed formula

https://brainly.com/question/13676476

#SPJ4

Mathematical relationships could be found in a linear programming model are (b) 2A - 2B = 30 (e) 1A + 1B = 9 (f) 2A + 6B + 1AB ≤ 36

Linear programming, mathematical modeling technique in which a linear function is maximized or minimized when subjected to various constraints.

(a) -1A + 2B ≤ 20 : Cannot be found in linear programming model as linear programming model can only consists of positive linear numbers and this equation contain negative number.

(b) 2A - 2B = 30 : Can be found in linear programming model

(c) 1A - 6B2 ≤ 10 : Cannot be found in linear programming model as equation includes square variable.

(d) 3√A + 2B ≥15 : Cannot be found in linear programming model as equation includes square root variable.

(e) 1A + 1B = 9 : Can be found in linear programming model

(f) 2A + 6B + 1AB ≤ 36 : Can be found in linear programming model

To know more about linear programming

https://brainly.com/question/30198026

#SPJ4

Answer:

Step-by-step explanation:10299

The limit of the difference quotient must not exist at any location z0 in the complex plane in order to demonstrate that f(z) = z is nowhere differentiable.

For f(z), the difference ratio is as follows:

[f(z Plus h) - f(z)] / h = [(z + h) - z] / h = h / h = 1

As h gets closer to 0, we take the maximum and obtain:

lim h0 [z + h - z] / = lim h 0 h / h = 1

This limit is constant at 1 and is unaffected by the number of z. The limit of the difference quotient must not exist at any location z0 in the complex plane in order to demonstrate that f(z) = z is nowhere differentiable. As a result, f(z) = z is never differentiable and the limit of the difference quotient is not present at any position z0 in the complex plane.

Learn more about quotient here:

https://brainly.com/question/16134410

#SPJ4

Answer: $81,686

Step-by-step explanation:

$148,520 - 45% = $81,686

Alternative

$148,520 x 0.55 = $81,686

Answer:c

Step-by-step explanation:

because

A: The correct statement is c. Statistics are used to estimate parameters.

Statistics is the science of collecting and analyzing data to gain insight into a population of interest. It involves the collection, organization, analysis, interpretation, and presentation of data. The goal of using statistics is to draw conclusions about a population of interest and to estimate parameters of the population.

A parameter is a numerical value that is used to describe a population. For example, the mean of a population is a parameter. Statistics are used to estimate parameters of a population from a sample of the population. This process is called estimation. A statistic is a numerical value that is used to describe a sample.

For example, the sample mean is a statistic that is used to estimate the population mean. Estimation is done using the formula for a sample statistic, which is given by:

Estimate= (Statistic) / (Sample Size)

Here, the statistic is the sample mean, and the sample size is the number of observations in the sample. For example, if the sample mean is 10 and the sample size is 5, then the estimate of the population mean is 2 (10/5).

Statistics can also be used to construct confidence intervals to describe population parameters, such as means and proportions. A confidence interval is an interval of values around a sample statistic, such as a mean or a proportion, that is expected to contain the population parameter with a certain level of confidence.

In conclusion, statistics are used to estimate parameters of a population from a sample of the population. Estimation is done using the formula for a sample statistic, and confidence intervals can be used to describe population parameters.

Learn more about Statistics here:

https://brainly.com/question/29093686

#SPJ4

Answer:

Step-by-step explanation:

Right Answer: Add to eliminate X

[tex]4x+ (-4x)+5y+9y=-6+(-22)\\14y=-28\\y=\frac{-28}{14} \\y=2[/tex]