Because Carlos had always done well in school, he knew that his parents and teachers

The stoichiometry of the reaction between ferrous ion and permanganate ion can be expressed through the reaction below:

[tex]\rm MnO_{4}^{-} + 5 Fe^{2+} + 8 H^{+} \rightarrow Mn^{2+} + 5 Fe^{3+} + 4 H_{2}O[/tex]

In a redox reaction, one reactant species is reduced and the other one oxidized. The species which is oxidized is donating one or more electrons to the other species and reduces it.

Iron metal donates 5 electrons to reduce Mn metal from oxidation state of + 7 to +2. One Fe  furnish one electron. Thus, 5 Fe is needed.

The oxidation half reaction is written as:

[tex]\rm 5Fe^{2+} \rightarrow 5Fe^{3+} + 5e-[/tex]

The reduction half reaction of Mn is written as follows:

[tex]\rm MnO_{4}^{-} + 5e^{-} \rightarrow Mn^{2+}[/tex]

The whole reaction can be balanced for all the atoms and can be written as above.

Find more on  redox reactions:

https://brainly.com/question/13293425

#SPJ1

When water freezes at its typical freezing point, its entropy changes to [tex]-22.08 J/mol K[/tex].

Entropy is a metric for how chaotic or unpredictable a system is. The quantity of energy in a thermodynamic system that is not usable for work is measured using this notion, which is utilised in thermodynamics and statistical mechanics. It is frequently referred to as the system's level of chaos or disorder.The change in entropy of water at its normal freezing point is given by the expression:

ΔS = -ΔH/T

Where ΔH is the enthalpy of fusion of water, which is 6.01 kJ/mol, and T is the freezing point of water, which is 273.15 K.

The change in entropy of water when it freezes at its normal freezing point is:

ΔS = [tex]\frac{-6.01 kJ/mol }{ 273.15 K}[/tex]

ΔS = [tex]-22.08 J/mol K[/tex]

Therefore, The change in entropy of water when it freezes at its normal freezing point is:-22.08J/molK

learn more about Entropy Refer:brainly.com/question/13386678

#SPJ4

Answer:

From the energy diagram, we can see that the reaction mechanism is an example of a two-step reaction. The first step (S1) involves the combination of ethylene (C₂H4) and hydrogen bromide (HBr) to form an ethyl cation (C₂H5+) and a bromide anion (Br). In the second step (S2), the ethyl cation and bromide anion combine to form ethyl bromide (C₂H5Br). The reaction is exergonic as evidenced by the fact that the activation energy, represented by the peak in the energy diagram, is negative. This indicates that the reaction releases energy.

The amount of heat required to raise the temperature of the system through 1°C is defined as the heat capacity of the system. The kilocalories of heat needed to heat the water from 62.0 °F to 105.0 °F is  40877.01.  

The quantity of heat required to raise the temperature of one gram of the substance through 1°C is known as the specific heat capacity. It is usually denoted by c.

The equation connecting the specific heat capacity with the heat is given as:

q = mc (T₂ - T₁) = mc Δ T

1 gallons = 3.785 L

450 gallons = 450 × 3.785 = 1703.25 L

Density of water is 1 g/cm³

Then the mass of water is, m = Density × Volume

m = 1703.25 L × 1000 mL/ 1L × 1.0 g / 1mL × 1kg / 1000g

m = 1703 .25 kg

The temperature in °F can be converted into °C as:

T°C = T°F - 32 / 1.8

T₁ = 62 -32 / 1.8 = 17°C

T₂ = 105 - 32/ 1.8 = 41°C

Δ T = T₂ - T₁  = 41 - 17 = 24°C

q = 1703.25 kg × 4.184 kJ/kg K × 24°C

q = 171033.552 kJ

1 kilojoule = 0.239 kilocalorie

171033.552 kJ = 40877.01 kilocalorie

Thus the heat required in kilocalorie is 40877.01.

To know more about specific heat capacity, visit;

brainly.com/question/29766819

#SPJ1      

In order to create the Grignard reagent from 1-hexanol, the matching halide must first be converted from it. You can accomplish this by reacting 1-Hexanol with a potent acid,

Like HCl. The appropriate alkyl chloride will be created during the reaction, and this alkyl chloride can then be combined with a primary alkyl halide, such as magnesium bromide, to create the Grignard reagent. The Grignard reagent will have the generic formula RMgX, where R is the alkyl group from 1-Hexanol and X is the halide. The reaction is normally carried out in an ether solvent. The synthesis of alcohols and other organic molecules can then be accomplished using the Grignard reagent.

Learn more about from ideal gas

brainly.com/question/14702056

#SPJ4

Electron configurations written down. The energy level (the period) should come first when writing an electron configuration, followed by the subshell that needs to be filled and the superscript.

The energy levels of the electronic orbitals are 1s 2s 2p 3s 3p. Due to the fact that one atom can have numerous electronic orbitals, energy levels are classified as particular quantum numbers: 1s, 2s, 3s, 4s, 3d, 4p, 5s, 4d, 5p 7s 5f 6d 6p 4f 5d 6p. The orbital angular momentum quantum number, indicated by l, can be understood.

Let's list the elements that have changed. The following is anticipated

Every stable electron configuration element gains the maximum D- Te Te +2 2- Po Pot2 +2 se se Hele as well as all other elements. Be Be 12 нд Mg+2 2n+2

To learn more about Electron configurations here:

https://brainly.com/question/29157546

#SPJ4

Magnesium would be a good selection as the sacrificial electrode in the cathodic protection of tin (Sn).

Why is magnesium used as a sacrificial anode?

Chemically, magnesium is oxidation resistant and this is because its surface is covered with a thin layer of oxide which protects it from being vulnerable to air. This is why it is highly suitable for use in sacrificial anodes to limit the effects and susceptibility of other metal surfaces to corrosion.

What is the best sacrificial anode?

Magnesium anodes are the most active and are the only anodes that work well in the low conductivity of fresh water. Magnesium is also relatively non-toxic to aquatic life.

Why is tin resistant to corrosion?

Tin has good corrosion resistance properties in gas, weak base, and weak acid environment at room temperature because the super potential of hydrogen on the metal tin is high.

To know more about sacrificial electrodes:

https://brainly.com/question/28168422

#SPJ4

Answer:

Let us say that the molecular formula of the compound = (NBH4)n (where, n is an integer)

Atomic mass of N, B, and H are respectively 14.00 amu, 10.81 amu, and 1.008 amu.

Thus, the molar mass of (NBH4)n = n x (1 x 14.00 amu + 1 x 10.81 amu + 4 x 1.008 amu)

= 28.84n amu

Now,

28.84n amu = 86.55 amu

or, n = 3

Hence, the molecular formula of the compound = (NBH4)3 = N3B3H12

Explanation:

The pOH of a 0.2 m HCl solution is 13.3.

Concentration is the ability to focus on a particular task or activity, blocking out distractions and using cognitive resources efficiently. It is a key factor in achieving success in any area, whether it be in school, the workplace, sports, or leisure activities. Concentration requires a person to be able to pay attention to a specific task over a long period of time, while blocking out irrelevant or competing stimuli.

It also involves the ability to sustain focus and effort, even when faced with challenging or tedious tasks. Developing concentration skills can be beneficial in many aspects of life, including improved academic performance, increased productivity, better decision-making, and better problem-solving skills. Practicing mindfulness, taking regular breaks, and organizing tasks can all help to improve concentration.

pH=-log10[H+]

pH=-log10[0.2]

pH=0.7

You can then enter this into the equation

pH + pOH = 14

placing our pH value into this we get

0.7 + pOH = 14

You can rearrange this to find

pOH = 14–0.7

which means

pOH=13.3

To learn more about concentration

https://brainly.com/question/28564792

#SPJ4

If concentrations are measured in M and time in seconds, M³s⁻³ is the units for the rate constant, , for the rate law, Rate=[A][B]².

The rate of the reaction or rate of the reaction is the rate at which an chemical reaction occurs, defined as proportionate to the rise in product concentration per unit time and the reduction in reactant concentration per unit time.

The speeds of reaction might vary greatly. For example, oxidative corrosion of iron in the Stratosphere is a slow reaction that really can take several years, but cellulose combustion in a fire occurs in fractions of a second.

Rate=[A][B]²

        =  Ms⁻¹×M²s⁻²

       = M³s⁻³

Therefore, M³s⁻³ is the units for the rate constant, , for the rate law,  Rate=[A][B]².

To learn more about rate of reaction, here:

https://brainly.com/question/8592296

#SPJ1

Answer:

-4

Explanation:

The overall negative charge in the formula Ti*O2 which contains 2 oxide ions, each with a -2 charge, is -4.

The total negative charge can be calculated by adding up the charges of all the oxide ions:

2 oxide ions x -2 charge/ion = -4

So, the overall negative charge in the formula Ti*O2 is -4.

The final temperature of the gas can be determined using Gay-Lussac's law. The temperature of the gas at 4.5 atm will be 66°C.

According to Gay- Lussacs law at constant volume, the pressure of a gas is directly proportional to the temperature.

Hence, P/T = constant.

Let P1 and T1 be the initial pressure and temperature and P2, T2 be the final quantities, then

P1/T1 = P2/T2

Given P1 = 4.5 atm

T1 = ?

P2 = 7.5 atm

T2 = 110°C

Then T1 = P1 T2/P1

T1 = 4.5 atm  ×110° C /7.5 atm

   = 66°C

Therefore, the temperature  of the gas at 4 .5 atm  is 66°C.

Find more on Gay- Lussacs law:

brainly.com/question/2683502

#SPJ1

Your question is incomplete. But your complete question probably was:

What would be the original Celsius temperature of a gas at a pressure of 4.5 atm if the temperature changes to 110°C at 7.5 atm.

The equation for the temperature change of the solution when 15 ml of 0.01 M HCl is mixed with ml of 0.01 M NaOH is:

HCl + NaOH → NaCl + H2O

Where nHCl is the amount of moles of HCl and ΔHCl is the molar heat of reaction of HCl, and nNaOH is the amount of moles of NaOH and ΔNaOH is the molar heat of reaction of NaOH.

The temperature change of a solution is determined by the amount of heat energy it absorbs or releases during a reaction. For example, when a solute dissolves in a solvent, it can cause the temperature of the solution to rise or fall.

This is because the solute absorbs or releases heat energy in order to break the intermolecular forces between the solvent molecules and the solute molecules. Additionally, when two solutions are mixed, their temperatures may change due to endothermic or exothermic reactions.

Learn more about temperature change of a solution:

https://brainly.com/question/27988898

#SPJ4

The limiting reactant in the given equation [tex]Zn + 2HCl \rightarrow ZnCl_2 + H_2[/tex] is Zn. The correct answer is option A.

The limiting reactant, also known as the limiting reagent, is the substance that is completely consumed or in a chemical reaction, thereby determining the maximum amount of product that can be formed.

To determine the limiting reactant, we need to compare the stoichiometric ratios of the reactants to see which one will be completely consumed first.

In the balanced equation, the stoichiometric ratio between zinc (Zn) and hydrochloric acid ([tex]HCl[/tex]) is [tex]1:2[/tex], meaning that one mole of Zn reacts with two moles of [tex]HCl[/tex].

Given that,

we have 2.1 moles of Zn and 6.0 moles of [tex]HCl[/tex], we can calculate the number of moles of [tex]HCl[/tex] needed to react with 2.1 moles of Zn by multiplying 2.1 moles of Zn by the stoichiometric ratio:

2.1 moles Zn[tex]\times[/tex] (2 moles [tex]HCl[/tex]/ 1 mole Zn) = 4.2 moles HCl

Since, we have 6.0 moles of [tex]HCl[/tex], which is greater than the 4.2 moles required to react with 2.1 moles of Zn, [tex]HCl[/tex] is present in excess.

Therefore, the limiting reactant in the given equation [tex]Zn + 2HCl \rightarrow ZnCl_2 + H_2[/tex] is zinc (Zn), as it will be completely consumed before all the [tex]HCl[/tex] can react. Option A is the correct answer.

Learn more about limiting reactant here:

https://brainly.com/question/33417913

#SPJ2

Answer:

Explanation:

one half mole or 76 grams of Iron (II) Sulfate.

Answer:

C, Carbon

Explanation:

Write the symbol for every chemical element that has atomic number greater than 6 and atomic mass less than 25.2 u.

The molarity of the solution prepared by diluting 60.02 mL of a 0.574 M potassium chloride solution to 150.00 mL is 0.229 M.

The initial molarity of the potassium chloride, M₁ = 0.574 M

The initial volume potassium chloride , V₁ = 60.02 mL

The final molarity potassium chloride, M₂ = ?

The final volume potassium chloride, V₂ = 150 mL

The expression is as follows :

M₁  V₁  = M₂ V₂

M₂ = M₁  V₁  / V₂

M₂ = ( 0.574 × 60.02 ) / 150

M₂ = 0.229 M

The molarity of the solution is 0.229 M with the volume of the 150 mL.

To learn more about molarity here

https://brainly.com/question/28285409

#SPJ4

In the pair (a) CH3Br or CH3F, the dominant intermolecular forces in CH3Br are dipole-dipole forces, while CH3F has London dispersion forces. Therefore, CH3Br has the higher boiling point [1].

In the pair (b) CH3CH2CH2OH or CH3CH2OCH3, the dominant intermolecular forces in CH3CH2CH2OH are hydrogen bonds, while CH3CH2OCH3 has dipole-dipole forces. Therefore, CH3CH2CH2OH has the higher boiling point.

In the pair (c) C2H6 or C3H8, the dominant intermolecular forces in C2H6 and C3H8 are London dispersion forces. Therefore, C3H8 has the higher boiling point.

In the pair (d) MgCl2 or PCl3, the dominant intermolecular forces in MgCl2 and PCl3 are ionic bonds. Therefore, MgCl2 has the higher boiling point.

In the pair (e) CH3NH2 or CH3F, the dominant intermolecular forces in CH3NH2 are hydrogen bonds, while CH3F has London dispersion forces. Therefore, CH3NH2 has the higher boiling point.

In the pair (f) CH3OH or CH3CH2OH, the dominant intermolecular forces in CH3OH and CH3CH2OH are hydrogen bonds. Therefore, CH3OH has the higher boiling point.

In the pair (g) CH3CH2CH2CH2CH2CH3 or 2,2-dimethylbutane, the dominant intermolecular forces in both molecules are London dispersion forces. Therefore, CH3CH2CH2CH2CH2CH3 has the higher boiling point.

Learn more about Molecular forces:

https://brainly.com/question/13588164

#SPJ4

The correct option is A. Methanol. When acetaldehyde is treated with LiAlH4, followed by aqueous then methanol will produce.

When acetaldehyde is treated with LiAlH4, the reaction results in the reduction of the aldehyde group to an alcohol. The LiAlH4 reacts with the acetaldehyde to form a charged intermediate species known as an enolate.

The enolate then undergoes hydrogenation, resulting in the production of methanol. Following the reaction, an aqueous workup is performed to hydrolyze the enolate and separate any impurities from the product. The aqueous workup also ensures that the LiAlH4 is completely neutralized, thus allowing for the recovery of the methanol as the major product.

Learn more about methanol:

https://brainly.com/question/30350012

#SPJ4

The balanced molecular equation for the reaction between aqueous solutions of acetic acid and potassium hydroxide is:

The total ionic equation for this reaction is:

The net ionic equation for this reaction is:

The net ionic equation for this reaction shows that the hydrogen ion (H+) and hydroxide ion (OH-) react to form water (H2O). This reaction is an example of a neutralization reaction, which occurs when an acid and a base react to form a salt and water.

The salt formed in this reaction is potassium acetate (KC2H3O2), which can be used in a variety of applications, including as a food preservative, in the production of perfumes, and as a source of potassium in fertilizer. In addition, the reaction can be used to titrate an acid to determine its concentration.

Learn more about balanced molecular equations:

https://brainly.com/question/26694427

#SPJ4

When balancing a chemical equation, it is permitted to multiply all coefficients by a common factor, as well as inserting coefficients in front of formulas of reactants and products.

Additionally, you can also add reactants or products, and raise the coefficients.

When balancing a chemical equation, it is important to consider the mole ratio, which is the ratio of the number of moles of each reactant to the number of moles of each product. To balance the equation, you need to adjust the coefficients of the reactants and products until the mole ratios are equal.

Learn more about balancing a chemical equation:

https://brainly.com/question/11904811

#SPJ4

The number of molecules in a certain number of moles can be calculated by multiplying the number of moles by Avogadro's number, which is approximately equal to 6.022 x [tex]10^{23}[/tex].

So, for 1.64 moles of Br2, the number of molecules would be:

1.64 moles × 6.022 x [tex]10^{23}[/tex] molecules/mole = 9.937 x [tex]10^{23}[/tex] molecules

Therefore, 1.64 moles of Br2 would contain approximately 9.937 x [tex]10^{23}[/tex] molecules.

The number of atoms, ions, or molecules in one mole of a substance is a key constant in chemistry. Named for the Italian scientist Amedeo Avogadro, it has a definition of 6.02214076 x [tex]10^{23}[/tex] particles per mole. Based on a sample's mass or molar quantity, this number is used to determine the number of atoms, ions, or molecules present. It is crucial for figuring out chemical reactions, putting chemical amounts into perspective, and figuring out how many particles are in a sample. The proportionality factor that connects the number of constituent particles in a sample with the amount of substance in that sample is called the Avogadro constant, often known as NA or L.

To know more about Avogadro's number, check out:

https://brainly.com/question/27553295

#SPJ1

The answer is 1) high vapor pressure = weak IMF, 2)high surface tension = strong IMF, 3) high viscosity = strong IMF, 4) high boiling point = strong IMF.

The strength of the intermolecular forces (IMF) is directly related to the boiling point of the compound. The higher the boiling point, the stronger the IMF. This is because a stronger IMF requires more energy to separate them, resulting in a higher boiling point.

The strongest IMFs involved in determining the boiling point of a compound are London dispersion forces (LDF), dipole-dipole interactions, and hydrogen bonding.

To know more about  intermolecular forces (IMF):

brainly.com/question/28196538

#SPJ4

The chair conformation is obtained by a  flip of the boat conformation.

In this conformation, the cyclohexane ring is bent into a chair-like shape, with alternating bonds in the ring adopting a "up" or "down" orientation.

The chair conformation is a very stable arrangement of bonds in cyclohexane, and it is the most common conformation observed in this type of molecule. The stability of the chair conformation is due to the fact that all of the bond angles in the ring are nearly tetrahedral, which is the preferred arrangement for carbon bonds. The chair conformation is also significant because it represents a compromise between the ring's need to minimize strain and its need to maintain its rigidity.

Learn more about conformation of molecules:https://brainly.com/question/2114821

#SPJ1

The molar mass of styrene (C8H8) is 104 g/mol, when a student dissolves 15.g of styrenein (C8H8) in 250 mL of a solvent with a density of 0.88g/mL.

To calculate the molarity of a solution, you must divide the number of moles of solute (styrene) by the volume (liters) of the solution: 1438 mol ÷ 0.

25 L = 0.5752 M = 0.58 M (rounded to two significant figures)

To calculate the molarity of a solution, divide the number of moles of solute by the mass of solvent in grams.

0.1438 mol ÷ 250 g = 0.0005752 mol/g = 0.

00058 mol/g (rounded to 2 significant figures

A student dissolved 15 g of styrene (C8H8) in 250 ml of solvent with a density of 0.88 g/ml. Styrene has a molar mass of 104 g/mol, so the number of moles of solute is 15 g ÷ 104 g/mol = 0.1438 mol The molarity of the solution is zero.

1438 mol ÷ 0.25 L = 0.58 M. Molarity is calculated as 0.1438 mol ÷ 250 g = 0.

00058 mol/g. Both molarity and molarity are measures of concentration and indicate the amount of solute in a solution.

To learn more about molarity, refer:

https://brainly.com/question/14636708

#SPJ4

A cation's name, symbol, and charge must be noted in order to determine the ionic compound's formula.The symbols for sodium and oxygen are respectively Na+ and O2.Na2O is the resultant substance.

To learn more about ionic formula refer

https://brainly.com/question/30444643

#SPJ1