Answer:
Based on the preceding information, which of the following is an consolidating entry needed to prepare a full set of consolidated financial statements at December 31, 20X8:
Based on the preceding information, which of the following is an consolidating entry needed to prepare a full set of consolidated financial statements at December 31, 20X8:
A. Common Stock 200,000
Retained Earnings 150,000
Income from Tester Co. 40,000
Dividends declared 10,000
Investment in Tester Co. 285,000
NCI in NA of Tester Co. 95,000
Explanation:
Data:
A is the only correct answer. With it, the following accounts are debited:
Common Stock 200,000
Retained Earnings 150,000
Income from Tester Co. 40,000
And these accounts are credited:
Dividends declared 10,000
Investment in Tester Co. 285,000
NCI in NA of Tester Co. 95,000
With these, the debit side and the credit side are made to be equal. Again, debiting and crediting the above accounts eliminate them from the combined or consolidated financial statements since they are reflected on opposite sides of the parent and subsidiary's financial statements.
1. Stockholders invest $90,000 cash to start the business.
2. Purchased three digital copy machines for $400,000, paying $118,000 cash and signing a 5-year, 6% note for the remainder.
3. Purchased $5,500 paper supplies on credit.
4. Cash received for photocopy services amounted to $8,400.
5. Paid $500 cash for radio advertising.
6. Paid $800 on account for paper supplies purchased in transaction 3.
7. Dividends of $1,600 were paid to stockholders.
8. Paid $1,200 cash for rent for the current month.
9. Received $2,200 cash advance from a customer for future copying.
10. Billed a customer for $500 for photocopy services completed.
No. Account Titles and Descriptions Debit Credit
1.
2.
3.
4.
5.
Answer:
S/n General journal Debit Credit
1. Cash $90,000
Common stock $90,000
2. Equipment $400,000
Cash $180,000
Notes payable $282,000
3 Supplies $5,500
Account payable $5,500
4. Cash $8,400
Service revenue $8,400
5. Advertising expense $500
Cash $500
6. Account payable $800
Cash $800
7. Dividends $1,600
Cash $1,600
8. Rent expense $1,200
Cash $1,200
9. Cash $2,200
Unearned service revenue $2,200
10. Account receivable $500
Service revenue $500
With respect to dividends and priority in liquidation, what has priority over common stock? Group of answer choices Treasury Stock Debt Capital Preferred Stock nonconvertible common equity
Answer:
Preferred stock
Explanation:
Preferred stock is a stock that has properties of both stocks and bonds. this is why they are referred to as an hybrid instrument. Preferred stock holders have priority over common shareholders with respect to dividends and liquidation,
31. Which one is not the barriers of Enterpreneurship:
(A) Lack of technical skills
(B) Political instability
(C) Technical knowledge
(D) Time pressure and distractions
Answer:
d
Explanation:
I think so, I'm not sure
Smithson Company uses a job-order costing system and has two manufacturing departments— Molding and Fabrication. The company provided the following estimates at the beginning of the year:
Molding Fabrication Total
Machine-hours 20,000 30,000 50,000
Fixed manufacturing
overhead costs $800,000 $300,000 $1,100,000
Variable manufacturing
overhead per machine-hour $5.00 $5.00
During the year, the company had no beginning or ending inventories and it started, completed, and sold only two jobs—Job D-75 and Job C-100. It provided the following information related to those two jobs:
Job D-75: Molding Fabrication Total
Direct materials cost $375,000 $325,000 $700,000
Direct labor cost $200,000 $160,000 $360,000
Machine-hours 15,000 5,000 20,000
Job C-200: Molding Fabrication Total
Direct materials cost $300,000 $250,000 $550,000
Direct labor cost $175,000 $225,000 $400,000
Machine-hours 6,000 24,000 30,000
Assume Delph uses a plantwide overhead rate based on machine-hours.
Required:
1-A. Compute the predetermined plantwide overhead rate.
1-B. Compute the total manufacturing costs assigned to Job D-70 and Job C-200.
1-C. If Delph establishes bid prices that are 150% of total manufacturing costs, what bid price would it have established for Job D-70 and Job C-200?
1-D. What is Delph's cost of goods sold for the year?
Assume Delph uses departmental overhead rates based on machine-hours.
2-A. Compute the predetermined departmental overhead rates.
2-B. Compute the total manufacturing costs assigned to Job D-70 and Job C-200.
2-C. If Delph establishes bid prices that are 150% of total manufacturing costs, what bid price would it have established for Job D-70 and Job C-200?
2-D. What is Delph's cost of goods sold for the year?
Answer:
Instructions are below.
Explanation:
1)
a) First, we need to calculate the total estimated overhead:
Total overhead= 1,100,000 + (5*50,000)= 1,350,000
Now, we can determine the overhead rate:
Predetermined manufacturing overhead rate= total estimated overhead costs for the period/ total amount of allocation base
Predetermined manufacturing overhead rate= 1,350,000/50,000
Predetermined manufacturing overhead rate= $27 per machine hour
b)
Job D-75:
Total cost= direct material + direct labor + allocated overhead
Total cost= 700,000 + 360,000 + 27*20,000
Total cost= $1,600,000
Job C-200:
Total cost= 550,000 + 400,000 + 27*30,000
Total cost= $1,760,000
c) Selling price= 150% of manufacturing costs
Job D-75= 1,600,000*1.5= $2,400,000
Job C-200= 1,760,000*1.5= $2,640,000
d) COGS= beginning finished inventory + cost of goods manufactured - ending finished inventory
COGS= 0 + (1,600,000 + 1,760,000) - 0
COGS= $3,360,000
2)
a)
Molding= (800,000/20,000) + 5= $45 per machine hour
Assembly= (300,000/30,000) + 5= $15 per machine hour
b)
Job D-75:
Total cost= 700,000 + 360,000 + 45*20,000
Total cost= $$1,960,000
Job C-200:
Total cost= 550,000 + 400,000 + 15*30,000
Total cost= $1,400,000
c)
Job D-75= 1,960,000*1.5= $2,940,000
Job C-200= 1,400,000*1.5= $2,100,000
d) COGS= 0 + (1,960,000 + 1,400,000) + 0
COGS= $3,360,000
Assume you work for a valuation firm, and you have been given the assignment of valuing a local law firm comprising three partners and four associates. One partner plans to retire spoon, and the partners are trying to agree on the value of a one-third interest in the firm in order to buy out the departing partner's interest. The firm's revenue per partner is two times higher than that of the average firm of a similar size, but you soon discover that 80% of firm revenue is from one client.
Required:
Please raise one question about this scenario that you would want to address.
Answer:
Valuation of a law firm
One question to raise:
Which of the partners brought in this one powerful client? I hope it is not the retiring partner.
Explanation:
If the retiring partner had brought in the client and had been in charge of the client's business, the firm's valuation would be drastically influenced by these facts. It is likely that the client might retire the service as the retiring partner retires. This will jeopardize the revenue outlook of the firm, its future prospects, and its current value. However, if the retiring partner is not linked to this powerful client, then it may be that the firm's value will not be at risk. Again, over-dependence on one client for firm's revenue is does not augur well for the firm. Moreover, the margin of over-dependence is too high for comfort. There is serious need for a review of the relationship, not in terms of termination, but in terms of seeking for more big-ticket clients to relatively reduce the over-dependence.
Mindy Novak is writing a paper and he must determine which of Porter's three generic strategies Beulah’s Boutiques has implemented. Mindy finds out that Beulah’s Boutiques offers specialty products found only in boutiques around the world to affluent customers. What would Mindy determine Beulah’s Boutiques is using as its generic strategy?
Answer:
The answer to this question can be defined as follows:
Explanation:
Mindy Novak writes a report, also determines, whether Beulah's boutiques have adopted Porter's three generic techniques. Mindy discovers Beulah's Boutiques only offer affluent clients premium brands in shops throughout the world, and he determines Mindy, that standard strategy of the boutiques of Beulah, which canister be defined as follows:
High expense, to the broad market Low cost, a narrow market. Low-cost, wide market High cost, narrow market High cost, narrow marketA worker has two jobs, and they can choose to work any number of hours in a day on each job (up to the upper limit, if any), but can only work on one job at a time. The first job pays $10 per hour and has an upper limit of 6 hours per day. The second job pays $6 per hour and has no upper limit (for example, fixed-contract online freelance work). The worker will always choose the first job if they can. Consider their budget constraint with the amount of daily leisure time on the horizontal axis (from 0 to 24 hours) and their consumption expenditure on the vertical axis (which equals their daily income). Based on this information, which of the following is correct?
a. The workers budget constraint is kinked at 6 hours of free time.
b. The worker will never choose to consume exactly 18 hours of free time.
c. The slope of the budget constraint is -6 when the hours of free time is small, and 10 when the hours of free time is large.
d. For the choice of 8 hours of free time, the maximum expenditure for the day is 96
Answer:
The slope of the Budget constraint is -6 when the hours of free time is small, and 10 when the hours of free time is large ( C )
Explanation:
The slope of the Budget constraint is -6 when the hours of free time is small, and 10 when the hours of free time is large
This is right, because whenever the hours of free time is small, This means that he will be under the second job that pays $6 per hour, with no upper limit on work hours, hence he will work more & enjoy less free time.
Hence the slope of BC = 6
Ming borrows X for 10 years at an annual effective interest rate of 8%. If he pays the principal and accumulated interest in one lump sum at the end of 10 years, he would pay 468.05 more in interest than if he repaid the loan with 10 level payments at the end of each year. Calculate X.
Answer:
X = $700
Explanation:
the future value of X = X · (1 + 8%)¹⁰ = 2.158925X
X = annual payment · 6.7101 (PV annuity factor, 8%, 10 periods)
annual payment = X / 6.7101
2.158925X = 10 annual payments + 468.05
2.158925X = 10X/6.7101 + 468.05
2.158925X = 1.490291X + 468.05
0.668634X = 468.05
X = 468.05 / 0.668634 = $700
if you payback the loan in one lump sum at the end of 10 years, you will pay = $700 x 2.158925 = $1,511.25
or you could make 10 annual payments = $700 / 6.7101 = $104.32, in total you would pay $1,043.20
the difference between both = $1,511.25 - $1,043.20 = $468.05
Luzadis Company makes furniture using the latest automated technology. The company uses a job-order costing system and applies manufacturing overhead cost to products on the basis of machine-hours. The predetermined overhead rate was based on a cost formula that estimates $900,000 of total manufacturing overhead for an estimated activity level of 75,000 machine-hours.
During the year, a large quantity of furniture on the market resulted in cutting back production and a buildup of furniture in the company’s warehouse. The company’s cost records revealed the following actual cost and operating data for the year:
Machine-hours 76,000
Manufacturing overhead cost $637,000
Inventories at year-end:
Raw materials $20,000
Work in process (includes overhead applied of $36,480) $115,800
Finished goods (includes overhead applied of $91,200) $289,500
Cost of goods sold (includes overhead applied of $480,320) $1,524,700
Required:
a. Compute the underapplied or overapplied overhead.
b. Assume that the company closes any underapplied or overapplied overhead to Cost of Goods Sold. Prepare the appropriate journal entry. (If no entry is required for a transaction/event, select "No journal entry required" in the first account field.)
c. Assume that the company allocates any underapplied or over appliedoverhead proportionally to Work in Process, Finished Goods, and Cost of Goods Sold. Prepare the appropriate journal entry. (If no entry is required for a transaction/event, select "No journal entry required" in the first account field.)
d. How much higher or lower will net operating income be if the underapplied or overapplied overhead is allocated to Work in Process, Finished Goods, and Cost of Goods Sold rather than being closed to Cost of Goods Sold?
Answer:
Please solution below
Explanation:
a. Compute the under applied or over applied overhead
First, we need to determine the predetermined overhead rate.
Predetermined overhead rate = Estimated total manufacturing overhead / Estimated total machine hours
= $900,000 / 75,000 hours
= $12.0 per hour
But;
Actual manufacturing overhead = $637,000
Manufacturing overhead applied to work in process during the year = 76,000 actual MHs × $12.00 per MH $912,000
Over applied overhead cost = $275,000
b. Journal entry
Cost of goods sold Dr $275,000
To Manufacturing over head applied Cr $275,000
c. The over applied over head would be allocated using the following percentages;
Overhead applied during the year ;
Work in process = $36,480. 6%
Finished goods = $91,200. 15%
Cost of goods sold = $480,320 79%
Total = $608,000 100%
The entry to record the allocation of the overhead applied would be ;
Work in process [6% × $275,000] = $16,500
Finished goods [15% × $275,000] = $41,250
Cost of goods sold [79% × $275,000] = $217,250
d. Comparing the two method;
Cost of goods sold if the over applied overhead is closed to the cost of goods sold [$1,524,700 + $275,000] = $1,799,700
Cost of goods sold if the overhead applied is closed to work in process, finished goods, and cost of goods sold = [$1,524,700 + $217,250] =
$1,741,950
Difference in cost of goods sold = $57,750
Analyzing Unearned Revenue Disclosures
The following disclosures (excerpted) are from the August 28, 2016, annual report of Costco Wholesale Corporation.
Revenue Recognition: We generally recognize sales, net of estimated returns, at the time the member takes possession of merchandise or receives services. When we collect payment from customers prior to the transfer of ownership of merchandise or the performance of services, the amount recieved is generally recorded as deferred revenue on the consolidated balance sheets until the sales or service is completed. Membership fee revenue represents annual membership fees paid by our memberships. We account for membership fee revenue, net of estimated refunds, on a deferred basis, whereby revenue is recognized ratably over the one-year membership period.
Revenue
($ millions) August 28, 2016 August 30, 2015 August 31, 2014
Net Sales $116,073 $113,666 $110,212
Membership fees 2,646 2,533 2,428
Total revenue $118,719 $116,199 $112,640
Current Liabilities ($ millions) August 28, 2016 August 30, 2015
Accounts payable $7,612 $9,011
Current portion of long-term debt 1,100 1,283
Accrued salaries and benefits 2,629 2,468
Accured member rewards 869 813
Deferred membership fees 1,362 1,269
Other current liabilities 2,003 1,695
Total current liabilities $15,575 $16,539
(a) Which of the following statements best explains in layman terms how Costco accounts for the cash received for its membership fees?
Because Costco does not know how many of its members will continue to the end of the year, cash received from members is recorded as a liability and recognized as revenue only at year-end.
When it receives cash, the company records it as a current liability. Then, it recognizes revenue evenly over the year.
The company records revenue when the cash is received.
Because Costco has a refund policy, the company records revenue when the cash is received, less an allowance for expected membership terminations.
Mark 1.00 out of 1.00
(b) Use the balance sheet information on Costco's Deferred Membership Fees liability account and its income statement revenues related to Membership Fees earned during 2016 to compute the cash that Costco received during 2016 for membership fees.
Total cash received (in $ millions) = $Answer
(c) Use the financial statement effects template to show the effect of the cash Costco received during 2016 for membership fees and the recognition of membership fees revenue for 2016.
Use negative signs with answers, when appropriate.
Balance Sheet
Transaction ($ millions)
Cash Asset + Noncash Assets = Liabilities + Contributed Capital + Earned Capital
Receive cash in advance for membership fees Answer Answer Answer Answer Answer
Recognized membership fees earned Answer Answer Answer Answer Answer
Income Statement
Revenue - Expenses = Net Income
Answer Answer Answer
Answer Answer Answer
Feedback
You have correctly selected 15.
Partially correct
Marks for this submission: 15.00/18.00.
Use the CAFR information for the City of Salem (Illustrations 2-2 through 2-16) to find the following items. in your answer, both indicate which financial statement contained the information and the item and the dollar amount.
Information Item Statement $ Amount
Ex Amounts due from other governments to support
governmental activities Balance Sheet—
Governmental Funds $1,328,448
A. Total capital outlay for the courthouse renovation
B. Total cash paid for capital additions for the solid
waste fund
C. Interest paid (not expense) on general long-term debt
D. Interest paid (not expense) on water department debt
E. Capital asset (net) for the government's component units
F. Contributions received for use by the private-purpose trust
G. Noncurrent liabilities associated with governmental
activities that are due in more than one year
H. Noncash contributions of capital assets for the water
department
Answer:
attached below
Explanation:
using the CAFR information the information required is tabulated as attached below
The net assets statement reports the liability, the net assets account balance for the government activities and also reports the assets
An example of a pioneering cost is the cost of Multiple Choice hiring management personnel. competing with existing multinationals. promoting a new product. transport fees. retaining employees.
Answer:
C. promoting a new product.
Explanation:
A foreign direct investment (FDI) can be defined as an investment made by an individual or business entity (investor) into an investment market (industry) located in another country. The investor here, shares a different country of origin from the country where his investment is located.
When establishing a foreign direct investment, investors are required to consider some basic entry decisions such as free market, political stability, low inflation rates, pioneering costs etc.
In a foreign investment, pioneering cost arises because the business investment differs from that in the firm's domestic market and such it is necessary that, the firm dedicate a good deal of time, money (expenses) and efforts to learning and adapting to the market rules, policies and processes.
Hence, an example of a pioneering cost is the cost of promoting a new product, cost of enlightening and education of customers etc.
To increase a company’s performance, a manager suggests that the company needs to increase the value of its product to customers. Describe three ways in which this advice might be incorrect
Answer and Explanation:
The explanation of the advice that represents three ways which can be considered as an incorrect is as follows
1. If the amount is rises than it cannot change the commodities or goods cost
2. In case when the customer is ready for paying than in this case the value of the amount rises
3. Also when the amount of the customer rises so the performance would remains constant without considering the rise in the profit.
All the following are characteristics of a tradable market except a. Easy Access b. Parity c. Liquidity d. Fungibility e. Lack of a Trend
Answer:
e. Lack of a Trend
Explanation:
The tradable market is the market in which the trading is to be done
It involves various attributes like parity, liquidity, fungibility but does not involve the lacking of a trend
Therefore according to the given situation, the option e is correct as it does not come under the tradable market characteristics
Therefore option e is right and the same is to be considered
Which are possible employers in the Financial career cluster? Check ALL that apply.
A. private company
B. government
C. nonprofit organization
D. bank
E. stock market
The correct option is B and D.
What is the Finance Career Cluster?The Finance Career Cluster prepares students for careers in financial and investment planning, banking, insurance, and business financial management. Finance career opportunities are available in every sector of the economy and require skills in organization, time management, customer service, and communication.
What are the four career pathways in finance?The four career pathways in the finance cluster are banking and related services, business financial management, financial and investment planning, and insurance services.
Learn more about finance here https://brainly.com/question/1279044
#SPJ2
Fort Corporation had the following transactions during its first month of operations: 1. Purchased raw materials on account, $85,000. 2. Raw Materials of $30,000 were requisitioned to the factory. An analysis of the materials requisition slips indicated that $6,000 was classified as indirect materials. 3. Factory labor costs incurred were $175,000 of which $145,000 pertained to factory wages payable and $30,000 pertained to employer payroll taxes payable. 4. Time tickets indicated that $145,000 was direct labor and $30,000 was indirect labor. 5. Overhead costs incurred on account were $198,000. 6. Manufacturing overhead was applied at the rate of 150% of direct labor cost. 7. Goods costing $115,000 are still incomplete at the end of the month; the other goods were completed and transferred to finished goods. 8. Finished goods costing $100,000 to manufacture were sold on account for $130,000.
Answer:
Follows are the solution to this question:
Explanation:
Services Names and descriptions of the accounts Dr. Cr.
1 Stock of raw resources 85000
Cash-able Accounts 85000
2 Stock of processes (30000-6000) 24000
Overhead of development 6000
Stock of raw materials 30000
3 employment manufacturer 175000
manufacturing plant wages 145000
Payroll Taxes 30000
4 Inventory job in process 145000
Overhead production 30000
Labor Plant 175000
5 Overhead production 198000
Cash-able Accounts 198000
6 Inventory of jobs in the process 217500
[tex](145000 \times 150 \%)[/tex]
Overhead of development 217500
7 Inventory of finished products 271500
Inventory job in process 271500
[tex](24000+145000+217500-115000)[/tex]
8 receivable Account 130000
Sales 130000
Wars sold at discount 100000
Inventory of finished products 100000
Aracel Engineering completed the following transactions in the month of June.
a. Jenna Aracel, the owner, invested $175,000 cash, office equipment with a value of $5,200, and $76,000 of drafting equipment to launch the company in exchange for common stock.
b. The company purchased land worth $56,000 for an office by paying $8,000 cash and signing a long-term not payable for $48,000.
c. The company purchased a portable building with $54,000 cash and moved it onto the land acquired in b.
d. The company paid $2,600 cash for the premium on an 18-month insurance policy.
e. The company completed and delivered a set of plans for a client and collected $6,200 cash.
f. The company purchased $32,000 of additional drafting equipment by paying $11,900 cash and signing a long-term not payable for $20,100.
g. The company completed $18,000 of engineering services for a client. This amount is to be received in 30 days.
h. The company purchased $2,000 of additional office equipment on credit.
i. The company completed engineering services for $25,000 on credit.
j. The company received a bill for rent of equipment that was used on a recently completed job. The $1,409 rent cost must be paid within 30 days.
k. The company collected $7,000 cash in partial payment from the client described in transaction g.
l. The company paid $2,400 cash for wages to a drafting assistant.
m. The company paid $2,000 cash to settle the account payable created in transaction h.
n. The company paid $1,105 cash for minor maintenance of its drafting equipment.
o. The company paid $10,170 cash in dividends.
p. The company paid $2,400 cash for wages to a drafting assistant.
q. The company paid $4,000 cash for advertisements on the web during June.
1. Prepare general journal entries to record these transactions using the following titles: Cash (101); Accounts Receivable (106); Prepaid Insurance (108); Office equipment (163); Drafting Equipment (164); Building (170); Land (172); Accounts Payable (201); Notes Payable (250); Common Stock (307); Dividends (319); Engineering Fees Earned (402); Wages Expense (601); Equipment Rental Expense (602); Advertising Expense (603); and Repairs Expense (604).
Transaction General Journal Debit Credit
a.
Answer:
a. Jenna Aracel, the owner, invested $175,000 cash, office equipment with a value of $5,200, and $76,000 of drafting equipment to launch the company in exchange for common stock.
Dr Cash 175,000
Dr Office equipment 5,200
Dr Drafting equipment 76,000
Cr Common stock 256,200
b. The company purchased land worth $56,000 for an office by paying $8,000 cash and signing a long-term not payable for $48,000.
Dr Land 56,000
Cr Cash 8,000
Cr Notes payable 48,000
c. The company purchased a portable building with $54,000 cash and moved it onto the land acquired in b.
Dr Building 54,000
Cr Cash 54,000
d. The company paid $2,600 cash for the premium on an 18-month insurance policy.
Dr Prepaid insurance 2,600
Cr Cash 2,600
e. The company completed and delivered a set of plans for a client and collected $6,200 cash.
Dr Cash 6,200
Cr Engineering fees earned 6,200
f. The company purchased $32,000 of additional drafting equipment by paying $11,900 cash and signing a long-term not payable for $20,100.
Dr Drafting equipment 32,000
Cr Cash 11,900
Cr Notes payable 20,100
g. The company completed $18,000 of engineering services for a client. This amount is to be received in 30 days.
Dr Accounts receivable 18,000
Cr Engineering fees earned 18,000
h. The company purchased $2,000 of additional office equipment on credit.
Dr Office equipment 2,000
Cr Accounts payable 2,000
i. The company completed engineering services for $25,000 on credit.
Dr Accounts receivable 25,000
Cr Engineering fees earned 25,000
j. The company received a bill for rent of equipment that was used on a recently completed job. The $1,409 rent cost must be paid within 30 days.
Dr Equipment rental expense 1,409
Cr Accounts payable 1,409
k. The company collected $7,000 cash in partial payment from the client described in transaction g.
Dr Cash 7,000
Cr Accounts receivable 7,000
l. The company paid $2,400 cash for wages to a drafting assistant.
Dr Wages expense 2,400
Cr Cash 2,400
m. The company paid $2,000 cash to settle the account payable created in transaction h.
Dr Accounts payable 2,000
Cr Cash 2,000
n. The company paid $1,105 cash for minor maintenance of its drafting equipment.
Dr Repairs expense 1,105
Cr Cash 1,105
o. The company paid $10,170 cash in dividends.
Dr Dividends 10,170
Cr Cash 10,170
p. The company paid $2,400 cash for wages to a drafting assistant.
Dr Wages expense 2,400
Cr Cash 2,400
q. The company paid $4,000 cash for advertisements on the web during June.
Dr Advertising expense 4,000
Cr Cash 4,000
Case Inc. is a construction company specializing in custom patios. The patios are constructed of concrete, brick, fiberglass, and lumber, depending upon customer preference. On June 1, 2017, the general ledger for Case Inc. contains the following data.
Raw Materials Inventory $4,200 Manufacturing Overhead Applied $32,640
Work in Process Inventory $5,540 Manufacturing Overhead Incurred $31,650
Subsidiary data for Work in Process Inventory on June 1 are as follows.
Job Cost Sheets
Customer Job
Cost Element Rodgers Stevens Linton
Direct materials $600 $800 $900
Direct labor 320 540 580
Manufacturing overhead 400 675 725
$1,320 $2,015 $2,205
During June, raw materials purchased on account were $4,900, and all wages were paid. Additional overhead costs consisted of depreciation on equipment $900 and miscellaneous costs of $400 incurred on account.
A summary of materials requisition slips and time tickets for June shows the following.
Customer Job Materials Requisition Slips Time Tickets
Rodgers $800 $850
Koss 2,000 800
Stevens 500 360
Linton 1,300 1,200
Rodgers 300 390
4,900 3,600
General use 1,500 1,200
$6,400 $4,800
Overhead was charged to jobs at the same rate of $1.25 per dollar of direct labor cost. The patios for customers Rodgers, Stevens, and Linton were completed during June and sold for a total of $18,900. Each customer paid in full.
Instructions
Journalize the June transactions: (1) for purchase of raw materials, factory labor costs incurred, and manufacturing overhead cost incurred; (2) assignment of direct materials, labor, and overhead to production; and (3) completion of jobs and sale of goods.
Post the entries to Work in Process Inventory.
Reconcile the balance in Work in Process Inventory with the costs of unfinished jobs.
Prepare a cost of goods manufactured schedule for June.
Answer and Explanation:
Please find answer and explanation attached
Exercise 2-8 Preparing T-accounts (ledger) and a trial balance LO P2 Following are the transactions of a new company called Pose-for-Pics Aug. 1 Madison Harris, the owner, invested $6,see cash and $33,509 of photog company paid $2,100 cash for an insurance policy covering the next 24 month:s s The company purchased office supplies for $888 cash. 20 The company received $3,331 cash in photography fees earned. 31 The company paid $675 cash for August utilities.
Required:
1. Post the transactions to the T-accounts.
2. Use the amounts from the T-accounts in Requirement (1) to prepare an August 31 trial balance for Pose-for-Pics. Complete this question by entering your answers in the tabs below.
Required 1 Required 2
Post the transactions to the T-accounts Cash ies Balance
Answer:
All requirements solved
Explanation:
For different accounts, debits and credits may translate to increases or decreases, but the debit side must always lie to the left of the T outline and the credit entries must be recorded on the right side.
T-Accounts
Cash
Date Description Debit Credit
1-Aug M Harris, Capital $6,500
2-Aug Prepaid Insurance $2,100
5-Aug Office Supplies $880
20-Aug Fees Earned $3,331
31-Aug Utilities Expense $675
31-Aug Balance $6,176
Total $9,831 $9,831
Office Supplies
Date Description Debit Credit
5-Aug Cash $880
31-Aug Balance $880
Total $880 $880
Prepaid Insurance
Date Description Debit Credit
2-Aug Cash $2,100
31-Aug Balance $2,100
Total $2,100 $2,100
Photography Equipment
Date Description Debit Credit
1-Aug M Harris, Capital $33,500
31-Aug Balance $33,500
Total $33,500 $33,500
M Harris, Capital
Date Description Debit Credit
1-Aug Cash $6,500
1-Aug Photography Equipment $33,500
31-Aug Balance $40,000
Total $40,000 $40,000
Utilities Expense
Date Description Debit Credit
31-Aug Cash $675
31-Aug Balance $675
Total $675 $675
Photography Fees Earned
Date Description Debit Credit
20-Aug Cash $3,331
31-Aug Balance $3,331
Total $3,331 $3,331
Trial Balance
Debit Credit
Cash $6,176
Office Supplies $880
Prepaid Insurance $2,100
Photography Equipment $33,500
M Harris, Capital $40,000
Photography Fees Earned $3,331
Utilities Expense $675
Totals $43,331 $43,331
Harnett Corporation has two manufacturing departments--Molding and Assembly. The company used the following data at the beginning of the period to calculate predetermined overhead rates:
Molding Assembly Total
Estimated total machine-hours (MHs) 3,000 7,000 10,000
Estimated total fixed manufacturing overhead cost $24,000 $53,200 $77,200
Estimated variable manufacturing overhead cost per MH $1.00 $2.00
During the period, the company started and completed two jobs--Job E and Job M. Data concerning those two jobs follow:
Job E Job M
Direct materials $21,600 $9,300
Direct labor cost $22,600 $9,500
Molding machine-hours 2,500 500
Assembly machine-hours 2,500 4,500
Required:
a. Assume that the company uses a plant-wide predetermined manufacturing overhead rate based on machine-hours. Calculate that overhead rate, (Round your answer to 2 decimal places.)
b. Assume that the company uses a plant-wide predetermined manufacturing overhead rate based on machine-hours. Calculate the amount of manufacturing overhead applied to Job E. (Do not round intermediate calculations.)
c. Assume that the company uses a plant-wide predetermined manufacturing overhead rate based on machine-hours. Calculate the total manufacturing cost assigned to Job E. (Do not round intermediate calculations.)
d. Assume that the company uses a plant-wide predetermined manufacturing overhead rate based on machine-hours and uses a markup of 20% on manufacturing cost to establish se ling prices. Calculate the selling price for Job E. (Do not round intermediate
calculations.)
e. Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both departments. What is the departmental predetermined overhead rate in the Molding department? (Round your answer to 2 decimal places.)
f. Assume that the company uses departmental predetermined overhead rates with machine-hours as the a location base in both production departments. What is the departmental predetermined overhead rate in the Assembly department? (Round your answer to
Answer:
Results are below.
Explanation:
a) To calculate the predetermined manufacturing overhead rate we need to use the following formula:
Predetermined manufacturing overhead rate= total estimated overhead costs for the period/ total amount of allocation base
Predetermined manufacturing overhead rate= (77,200 + 3,000 + 14,000) / 10,000
Predetermined manufacturing overhead rate= $9.42 per machine hour
b) To allocate overhead, we need to use the following formula:
Allocated MOH= Estimated manufacturing overhead rate* Actual amount of allocation base
Job E:
Allocated MOH= 5,000*9.42
Allocated MOH= $23,550
c) Total cost= 21,600 + 22,600 + 47,100
Total cost= $91,300
d) Selling price= 91,300*1.2= $109,560
e) Predetermined manufacturing overhead rate= (24,000/3,000) + 1
Predetermined manufacturing overhead rate= $9 per machine hour
f) Predetermined manufacturing overhead rate= (53,200/7,000) + 2
Predetermined manufacturing overhead rate= $9.6 per machine hour
Consider the following story:
Woody loves bowling, and he also loves Beth.
Woody does not particularly like the beach.
The best outcome for Woody is to be at the bowling alley with Beth.
Given the choice of going bowling alone or being at the beach with Beth, Woody would choose to be with Beth.
The worst outcome for Woody is to be at the beach alone.
Beth loves the beach, and she also loves Woody.
Beth does not particularly like bowling.
The best outcome for Beth is to be at the beach with Woody.
Given the choice of going to the beach alone or bowling with Woody, Beth would choose to be with Woody.
The worst outcome for Beth is to be at the bowling alley alone. Woody and Beth plan to meet after work, but each has forgotten where. Suppose the following payoff matrix tells the story, given Woody and Beth's preferences above.
Complete the matrix by filling in the missing payoffs. (Enter your responses as integers.)
Beth
Bowling Beach
Woody Bowling
Beach
a. Find all Nash equilibria in this game, if any.
b. Is this game an archetype? If yes, identify the archetype and explain your selection.
Answer:
a. Both beth and Woody are comfortable at their own preferences and feel dominant in their own strategy.
The outcome to meet somewhere will be either the bowling alley or the beach, any one of Beth and Woody will dominate, however both's priority is to stay together which is fulfilled in both the scenarios.
Explanation:
a. Both beth and Woody are comfortable at their own preferences and feel dominant in their own strategy.
The outcome to meet somewhere will be either the bowling alley or the beach, any one of Beth and Woody will dominate, however both's priority is to stay together which is fulfilled in both the scenarios.
The marginal external cost associated with air pollution increases with the annual output of a polluting industry. At the current competitive equilibrium level of output per year, the marginal external cost is $10 per unit of output. To achieve efficiency,
a. a corrective tax of $10 per unit of output is required.
b. a corrective tax of more than $10 per unit of output is required.
c. a corrective tax of less than $10 per unit of output is required.
d. a corrective subsidy of $10 per unit of output is required.
e. a corrective subsidy of less than $10 per unit of output is required .
Answer:
The answer is "Option c".
Explanation:
The Marginal external cost, owing only to the production of an extra unit of goods or services, is the cost changes for persons besides the producer or buyer of goods or services. In this, question the "option c" is right in, this regard because it needs a correction tax of less than $10 per unit of production.
Seiko’s current salary is $85,000. Her marginal tax rate is 32 percent and she fancies European sports cars. She purchases a new auto each year. Seiko is currently a manager for an Idaho Office Supply. Her friend, knowing of her interest in sports cars, tells her about a manager position at the local BMW and Porsche dealer. The new position pays only $75,000 per year, but it allows employees to purchase one new car per year at a discount of $15,000. This discount qualifies as a nontaxable fringe benefit. In an effort to keep Seiko as an employee, Idaho Office Supply offers her a $10,000 raise. Answer the following questions about this analysis.
Problem 12-41
Part a a. Assuming it has a 21 percent marginal tax rate, what is the annual after-tax cost to Idaho Office Supply to provide Seiko with the $10,000 increase in salary?
Answer:
$7,900
Explanation:
Given that:
Assuming a marginal tax rate of 21%
Salary Raise = $10000
Annual after-tax cost to Idaho :
Salary raise ( 1 - marginal tax rate)
$10000 ( 1 - 21%)
$10000( 1 - 0.21)
$10000 - $2100
= $7,900
A deposit of $10,000 is made a year from now, a second deposit of $10,000 is made at the end of the year 5, and a deposit of $3000 is made at the end of year 8. The account earns 6% interest. You want to withdraw an equal amount, X at the end of each year for the next 10 years. What is the amount of X if the goal is to empty the account
Answer:
$4068.77
Explanation:
We calculate the Future value of all the three deposits at the end of year 8
FV = CF1 *(1+r)^8-1 + CF5*(1+r)^8-5 + CF8 * (1+r)^8-8
FV = 10000 *(1+0.06)^7 + 10000*(1+0.06)^3 + 3000 * (1+0.06)^0
FV = 15,036.30 + 11,910.16 + 3,000
FV= $29,946.46
We have to calculate the annuity payments that have a Present value = $29,946.46
PV = PMT * 1-(1+r)^-n / r
PV = 29,946.46, PMT= ?, r = 6%, n = 10
29,946.46 = PMT * 1-(1+0.06)^-10 / 0.06
29,946.46 = PMT * 1 - 1.06^-10 / 0.06
29,946.46 = PMT * 1 - 0.558395 / 0.06
29,946.46 = PMT * 0.441605 / 0.06
29,946.46 = PMT * 7.36008
PMT = 29,946.46/7.36008
PMT = 4068.768274257889
PMT = $4068.77
Thus, amount of X is $4068.77 if the goal is to empty the account.
what will you use for banca/boat to move
Answer:
a paddle
Explanation:
Using a "paddle" is very important in order to move/propel a boat. Paddling creates a force which goes against the water. This force is faced by an opposite force that is equal and that which allows the boat to move forward.
So as you push the water asides, the boat accelerates. Such technique is deemed efficient when using the boat. Not following the proper technique will not move the boat.
Etxuck327 Inc. sells a particular textbook for $39. Variable expenses are $28 per book. At the current volume of 49,000 books sold per year the company is just breaking even. Given these data, the annual fixed expenses associated with the textbook total:
Answer:
539,000.00
Explanation:
As per the contribution margin analysis concept, the break-even point is obtained by dividing fixed cost by contribution margin per unit.
For Etuck327,
The selling price is $39
Variable expense is $28
Break-even in units is 49,000 books.
Contribution margin per unit = selling price - variable costs
=$39- $28
=$11
if Break-even = fixed cost/ contribution margin per unit, then
49,000= fixed cost / 11
fixed costs = 11 x 49000
Fixed costs = 539,000.00
Suppose you are a manager for a multinational company that produces a variety of beauty products. Heartland Company was founded in 1942 and began making shampoo and soap products. Heartland, headquartered in St. Louis, Missouri, now sells hair care, soap, and makeup products in 22 countries across the globe. Heartland holds the majority market share in the U.S. and is largely regarded as a trend-leader in hair and beauty products. As the Global Brand Vice President, you have been tasked with taking the brand to Brazil, considered to be a large cosmetics market in the next few years. The Brazilian cosmetics and hair care market is largely dominated by Belleza who currently holds a 60% market share. Belleza is marketed toward young, fashion-forward women. The second largest company, Botánico, holds just a 20% share of the market. Your research suggests that while Botánico has efficient manufacturing and distribution, young consumers see them as being a brand for their mothers and grandmothers.
Given the information above, what is the best market entry strategy for this company?
a. Partnership
b. Exporting
c. Outsourcing
Answer:
a. Partnership
Explanation:
Brazil is a market that can be tricky if exporting is used. Botanico is struggling at 2nd position with only 20% share but are efficient in manufacturing and distribution which can be utilized by Heartland. Heartland is known as trend setter which is something Botanica lacks currently to woo the young women and girls into buying their products A partnership would simply result that competitive edges of both the parties can be employed together to win over the market.
Assume the bonds below have the same term and principal and that the state or local government that issues the municipal bond has a good credit rating. Which list has bonds correctly ordered from the one that pays the highest interest rate to the one that pays the lowest interest rate
Answer:
b. corporate bond, U.S. government bond, municipal bond
Explanation:
If we assume that the bonds have the similar time period and the principal amount so the bond that pays the highest interest to the bond that pays the lowest interest rate is described below:
The ranking can be done
Corporate bond - highest interest rates
Municipal bonds - lowest interest rates
The same is to be considered
Therefore the option b is correct
BensonBenson & Company is an architectural firm specializing in home remodeling for private clients and new office buildings for corporate clients. charges customers at a billing rate equal to % of the client's total job cost. A client's total job cost is a combination of (1) professional time spent on the client ( per hour cost of employing each professional) and (2) operating overhead allocated to the client's job. allocates operating overhead to jobs based on professional hours spent on the job. estimates its five professionals will incur a total of 10,000 professional hours working on client jobs during the year.
AllissaAllissa LarsonLarson hired BensonBenson to design her kitchen remodeling. A total of 35 professional hours were incurred on this job. In addition, LarsonLarson's remodeling job required one of the professionals to travel back and forth to her house for a total of 155 miles. The blueprints had to be copied four times because LarsonLarson changed the plans several times. In addition, 14 hours of secretarial time were used lining up the subcontractors for the job.
All operating costs other than professional salaries (travel reimbursements, copy costs, secretarial salaries, office lease, and soforth) can be assigned to the three activities. Total activity costs, cost drivers, and total usage of those cost drivers are estimated as follows:
Activity Total Activity Cost Cost Driver Usage Total Usage by Corporate Clients Total usage by Private Clients
Transporation to clients. . . . . . $9,000 Round-trip mileage to clients. . . . . 1,500 miles 13,500 miles
Blueprint copying. . . . . . . . . . . 35,000 Number of copies. . . . . . . . . . . . 250 copies 750 copies
Office support. . . . . . . . . . . . . . 190,000 Secretarial time. . . . . . . . . . . . . . . 2,600 secretarial 2,400 secretarial
hours hours
Total operating overhead. . . . $234,000
Required:
a. Calculate the current indirect cost allocation rate per professional hour.
b. Calculate the total amount that would be billed to LarsonLarson given the current costing structure.
c. Calculate the activity cost allocation rates that could be used to allocate operating overhead costs to client jobs.
d. Calculate the amount that would be billed to LarsonLarson using ABC costing.
e. Which type of billing system is more fair to clients? Explain.
Answer:
Benson & Company
a. Current indirect cost allocation rate per professional hour = Total overhead divided by 10,000 professional hours
$234,000/10,000
= $23.40
b. Total amount that would be billed to Larson with the current costing structure:
= $23.40 * 35
= $819.00
c. Overhead Rates based on ABC:
Transport to clients = $0.60 ($9,000/15,000)
Blueprint copying = $35.00 ($35,000/1,000)
Office support = $38.00 ($190,000/5,000)
d. Larson's Job based on ABC:
Transport to clients = $93 ($0.60 * 155)
Blueprint copying = 140 ($35.00 * 4)
Office support = 532 ($38.00 * 14)
Total $765
e. With Benson Company using ABC billing system to charge Larson, the system is fairer to clients generally, because it takes into consideration the volume of each activity consumed per client. Customers are charged based on actual activities consumed, and not based on some arbitrary figures. It is more reflective of the cost structure of the business and offers the best quality service to customers because price is determined by volume of activities.
Explanation:
a) Data and Calculations:
Professional hours spent on Larson job = 35 hours
Travel = 155 miles
Blueprints copies = 4
Secretarial time = 14 hours
Other operating costs:
Activity Total Activity Cost Driver Total Usage by Total Usage by
Cost Usage Corporate Clients Private Clients
Transportation Round-trip mileage
to clients $9,000 to clients 1,500 miles 13,500 miles
Blueprint
copying 35,000 Number of copies 250 copies 750 copies
Office support 190,000 Secretarial time 2,600 secretarial 2,400 secretarial hours hours
Total operating overhead $234,000
Estimated professional hours = 10,000
Overhead Rate = $23.40
Larson's Job:
Overhead cost = $23.40 * 35 = $819.00
Overhead Rates based on ABC: Larson's Job
Transport to clients = $0.60 $93 ($0.60 * 155)
Blueprint copying = $35.00 140 ($35.00 * 4)
Office support = $38.00 532 ($38.00 * 14)
Total $765
The adjusted trial balance of Windsor, Inc. shows these data pertaining to sales at the end of its fiscal year, October 31, 2022: Sales Revenue $908,100; Freight-Out $13,400; Sales Returns and Allowances $19,800; and Sales Discounts $14,500.
Required:
Prepare the sales section of the income statement.
Answer
Windsor, Inc
Income Statement (Partial)
For the year October 31, 2022
Revenue
Sales $908,100
Less: Sales return and allowance $19,800
Sales Discount $14,500
$34,300
Net Sales $837,800