Assume you fill a balloon with 0.0500 mol of O2 that has a volume of 1.20L on a boat where the temperature is 27°C and the pressure is 1.00 atm. You then tie a rock to the balloon and throw it in the ocean. As it sinks, the temperature decreases to 4°C and the volume decreases to 0.153 L. What is the pressure at this depth? (Assume no air can get out of the balloon so the moles stay the same)


______atm (Use 3 Sig Figs)



30 points

Answer:

Below

Explanation:

a)  From the equation every 2 moles of (CuNo3)2 results in ONE mole of O2

   starting with 5 moles you would get  2 1/2 moles of O2

       each mole of O2 weighs ( 2 * 15.99) = 31.98 g ( from periodic table)

              2 1/2 of these would weigh   79.95 g

b)   each mole of Cu(NO3)2 produces the same number of moles of Cu O

       how many moles of Cu (NO3)2  are in 87.49 g

     again from periodic table   Cu = 63.546 gm N = 14.007  O=15.999

         total mole weight of Cu(No3)2 would then be 187.554 g

                  87.49 g / 187.554 g / mole = .466 moles  the same amount of Cu O

c)    Want to try this one yourself?

N₂0₄ is the formula represents the binary molecular compound dinitrogen tetroxide. Therefore, option B is correct.

Binary molecular compounds are made up of exactly two nonmetal elements. HF, NO2, and P2O5 are a few examples. It is extremely simple to name binary molecular compounds. The first element is given its element name, followed by ide; the second element is given its root (hydr, bor, carb, ox, fluor, etc.).

In N₂0₄ molecule there are two nitrogen atoms at the suffix so, it is binary and in oxygen atom its suffix is 4 so, it is tetroxide. Therefore, N₂0₄ is the formula represents the binary molecular compound dinitrogen tetroxide.

Thus, option B is correct.

To learn more about the binary molecular compound, follow the link;

https://brainly.com/question/7960132

#SPJ1

The volume of the balsa wood weighing 50lbs is approximately 0.162 cubic meters.

Volume is defined as the space occupied within the boundaries of an object in three-dimensional space.

To find the volume of a piece of balsa wood weighing 50lbs, we need to first convert the weight to kilograms and then divide by the density of balsa wood.

1 lb = 0.45359237 kg

So, 50 lbs = 50 * 0.45359237 = 22.6796185 kg

The volume of the balsa wood can then be calculated as follows:

Volume = 22.6796185 kg / (140 kg/m^3) = 0.162 m^3

Therefore, The volume of the balsa wood weighing 50lbs is approximately 0.162 cubic meters.

Learn more about volume here: brainly.com/question/14197390

#SPJ1

Cf cannot be a chemical symbol of an element. Therefore, option B is correct.

The term an element is defined as a substance that cannot be broken down into a simpler format. They are separate by a unequaled atomic number. The elements are formed by their atomic number in the periodic table, which highlights elements with similar properties.

Cf cannot be a chemical symbol of an element. CO is the symbol of element cobalt. B is the symbol of element boron and Cu is the symbol of an element copper.

Thus, option B is correct.

To learn more about an element, follow the link;

https://brainly.com/question/13025901

#SPJ1

Your question is incomplete, most probably your answer was

Which of the following cannot be the chemical symbol for an element

a. co

b. cf

c. b

d. cu

The cost of 1 pound flask of mercury is $1.86. One of the most commonly used units for determining the mass or substance of an item or a body is the pound.

You really must understand what pounds signify when referring to weight. One of the most commonly used units for determining the mass or substance of an item or a body is the pound.

Scales are used in several ways to determine a body's weight or mass. To measure various items of various sizes, many sorts of scales are utilized. As the measure of an object's weight, pounds are used. In Britain, this style of measuring in pounds is typical.

cost of  76.00 pound flask of mercury =$142.00

cost of 1 pound flask of mercury=$142.00/  76.00 =$1.86

Therefore, the cost of 1 pound flask of mercury is $1.86.

To learn more about pound, here:

https://brainly.com/question/29181271

#SPJ1

The molar mass of compound of magnesium chloride is 95.211 g/mole while that of ammonium sulfate is 132.14 g/mole.

Molar mass of a compound or a molecule is defined as the mass of the elements which are present in it.The molar mass is considered to be a bulk quantity not a molecular quantity. It is often an average of the of the masses at many instances.

The molecular mass and formula mass are used as synonym for the molar mass.It does not depend on the amount of substance which is present in the sample.It has units of gram/mole.

Learn more about molar mass,here:

https://brainly.com/question/12127540

#SPJ1

Taking into account the definition of dilution, the volume of water added to 150cm³ of 0.5 M NaOH to produce 0.1 M solution is 600 cm³.

A dilution is a procedure whose purpose is to decrease the amount of solute per unit volume of dilution. This procedure is accomplished by adding a specified amount of diluent to a specified amount of solute.

The amount of solute does not change. As more solvent is added, the concentration of the solute decreases and the volume of the solution increases.

A dilution is mathematically expressed as:

Ci×Vi = Cf×Vf

where:

In this case, you know:

Replacing in the definition of dilution:

0.50 M× 150 cm³= 0.10 M× Vf

Solving:

(0.50 M× 150 cm³)÷ 0.10 M= Vf

750 cm³= Vf

If the initial volume is 150 cm³, the amount of volume of water added is calculated as:

Volume of water= Vf - Vi

Volume of water= 750 cm³ - 150 cm³

Volume of water= 600 cm³

In summary, the volume of water added is 600 cm³.

Learn more about dilution:

brainly.com/question/6692004

#SPJ1

The mass percent of the sugar would increase as the density is increasing.

There is a positive relationship between the mass percent of sugar and the density of a sugar solution. As the mass percent of sugar in a solution increases, the density of the solution also increases

. This occurs because sugar molecules have mass, and when more sugar is added to a solution, the total mass of the solution increases, resulting in a higher density. However, it is important to note that the relationship between the mass percent of sugar and density is not linear and is influenced by the temperature and pressure of the solution.

Learn more about density:https://brainly.com/question/29775886

#SPJ1

Answer:

weathering

Explanation:

This is typical erosion of rocks / soil etc caused by wind/rain/ice etc

This depends how much it costs per load of laundry.

For example:

If 1 load of laundry costs $2.50, this would mean that you need 10 quarters for one load. Multiply that by 10, and you get 100 quarters (the equivalent of $25).

Depending on how much the load costs, simply divide the price per load by .25 to get you total in quarters, then multiply it by 10 in this case.

Answer:

The percentage of IF₅ (by mole) in the final product mixture will be 50%. This is determined by the stoichiometry of the reaction, the given molar mass of the reactants, and the ideal gas law.

Explanation:

Mass of 0.359 mol of KCI is calculated to be 26.79 g. Mass of a given chemical element or chemical compound (g) divided by the amount of substance (mol) is called molar mass.

Molar mass of a compound can be calculated by adding standard atomic masses of the constituent atoms.

The mass of 0.359 mol of KCI can be calculated by multiplying the number of moles by its molar mass:

mass = moles * molar mass

mass = 0.359 mol * 74.55 g/mol

mass = 26.79 g

So, the mass of 0.359 mol of KCI is 26.79 g.

To know more about molar mass, refer

https://brainly.com/question/837939

#SPJ1

Answer: 26.79

Explanation:

The average atomic mass of tin is 118.

The average atomic mass of an element can be calculated by taking into account the isotopic composition of the element and the atomic masses of its isotopes. The average atomic mass is found by weighting the atomic masses of each isotope with its relative abundance, and then summing these values.

Average atomic mass = (mass of isotope 1 * abundance of isotope 1) + (mass of isotope 2 * abundance of isotope 2) + ... + (mass of isotope n * abundance of isotope n)

For the average atomic mas of tin;

(117.9 * 0.47) + (118.9 * 0.53) =

55.4 + 63.0

= 118.4

Learn more about atomic mass:https://brainly.com/question/17067547

#SPJ1

The IUPAC was founded in 1919 by academics and researchers who realized the need for chemical standardization. Therefore, in the below given ways molecules can be named.

The International Union of Pure as well as Applied Chemistry is abbreviated as IUPAC. It belongs to an international scientific publication with no government affiliation. The IUPAC works to develop chemistry by, among other things, establishing international quality standards for nomenclature, symbols, as well as units.

The IUPAC was founded in 1919 by academics and researchers who realized the need for chemical standardization. The International Union of Pharmaceutical Societies (IACS), the IUPAC's forerunner, convened in Paris in 1911 to discuss topics that needed to also be addressed.

CH[tex]_3[/tex] methane

CH[tex]_3[/tex]CH[tex]_3[/tex] ethane

CH[tex]_3[/tex]CH[tex]_2[/tex]CH[tex]_3[/tex] propane

Therefore, in the above given ways molecules can be named.

To learn more about IUPAC , here:

https://brainly.com/question/30086566

#SPJ1

Na is for sodium and SO4 is sulfate...

Answer: The chemical compound name for Na₂SO₄ is Sodium Sulfate.

State of emergency was proclaimed in Flint, the county seat of Genesee, by Michigan Governor Rick Snyder on January 5, 2016. Shortly after, President Barack Obama announced a federal state of emergency, approving further assistance from the Department of Homeland Security and the Federal Emergency Management Agency.

A public health emergency known as the Flint water crisis began in 2014 when the drinking water in Flint, Michigan was found to be tainted with lead and possibly Legionella bacteria. Flint switched its water source from treated Detroit Water and Sewerage Department water (obtained from Lake Huron and the Detroit River) to the Flint River in April 2014 due to a budget issue.

Learn more Flint water crisis here https://brainly.com/question/20987410

#SPJ1

Some of the hazards that we should be aware of in the laboratory include the following: flammable substances, sharps (equipment that can cut or puncture skin) and fire. That is option A, B and E.

Laboratory hazards are those substances or equipments that are found in the laboratory which can cause harm to an individuals working in the laboratory.

Some of the hazards in the laboratory include chemical, biological, physical and radioactive hazards, as well as, musculoskeletal stresses.

Learn more about hazards here:

https://brainly.com/question/29546272

#SPJ1

Some of the hazards to be aware of in this lab include;

A Laboratory hazard is anything that has the potential to cause damage or harm.

Chemical, biological, physical, radioactive, and other possible risks are all present for those working in a laboratory, in addition to musculoskeletal strains. Many employees are more likely to sustain injuries because they are not aware of the dangers that could exist at work.

Some laboratory hazards include:

Learn more about laboratory hazards at: https://brainly.com/question/30369561

#SPJ1

Answer:

The edges changes quite drastically and the size went down by a millimeter. The color and hardness didn't change at all. The most noticeable difference was the edges.

Based on the percentage mass of oxygen in trifluoroacetic acid, the mass of the trifluoroacetic acid sample is 168.5 grams.

The percentage mass of oxygen in trifluoroacetic acid is determined as follows:

The molar mass of trifluoroacetic acid = 12 * 2 + 1 + 19 * 3 + 16 * 2

The molar mass of trifluoroacetic acid = 114 g

The percentage mass of oxygen in trifluoroacetic acid = (16 * 2)/114 * 100%

The percentage mass of oxygen in trifluoroacetic acid = 28.07%

The mass of the trifluoroacetic acid sample will be 47.3/ 28.07% = 168.5 grams

Learn more about percentage mass at: https://brainly.com/question/26150306

#SPJ1

Answer:

A

Explanation:

Na2SO4 +BaCl2 ____BaSO4+2NaCl

Answer:

Excess Reactant

Explanation:

Limiting Reactant is the reactant the runs out first.

The mass of an electron is equal to 9.10938 × 10e–31 kg, the speed of light (c) is equal to 3.00 × 10e8 m/s, and Planck's constant is h = 6.626 × 10e–34. The velocity of these electrons is 297,196,680.87m/s

The term velocity is defined as the direction of the movement of the body or the object. Speed is primarily a scalar quantity. Velocity is essentially a vector quantity.

We know the equation connecting potential and velocity of electrons is as follows,

eV=12mv2

Where eV is the kinetic energy

Also, we know

According to Einstein equation and de broglie equation we can write

mc2=hc

So,

mc = h

Given

me = 9.10938 × 10e

c = 3.00 × 10e8 m/s

h =  6.626 × 10e–34

λ = h / mc

= 2.45 × 20 ⁻¹²m

λ = h / mv

v = 297,196,680.87m/s

Thus, the velocity of these electrons is 297,196,680.87m/s

To learn more about the velocity, follow the link;

https://brainly.com/question/18084516

#SPJ1

The reaction is exothermic and the heat that is released is exothermic reaction.

We have to note that we can say that the reaction is an exothermic reaction when there is the release of heat in the system and then we know that the release of the heat would determine the equilibrium temperature.

We know that;

H = mcdT

m = mass of the water

c = Heat capacity of the water

dT = temperature change

We then have that;

H = 99.7632 * 4.2 * (64.4 - 100.79)

H = -15.2 kJ

Learn more about exothermic reaction:https://brainly.com/question/10373907

#SPJ1

The abundance of resources means that there would be more individuals in the ecosystem.

When resources are abundant, competition for those resources is less intense. However, when resources become scarce, competition for them increases, and some species may become extinct or be displaced by more competitive species.

Again, availability of resources can also affect population growth. For example, if resources are abundant, populations of organisms may increase, leading to overcrowding and competition for limited resources. On the other hand, if resources are scarce, population growth may be limited.

Learn more about ecosystem:https://brainly.com/question/13979184?

#SPJ1

5.6 mol N₂O is equal to 5.6 mol. (Note: The chemical formula N₂O already specifies the number of moles, so including "mol" after the number is redundant.) The answer, rounded to two significant figures, is 5.6 mol.

A mole is a unit of measurement in chemistry that represents an amount of a substance. One mole is defined as the amount of a substance that contains Avogadro's number of entities, where Avogadro's number is defined as 6.02214076 x 10²³ particles. This number is used to convert between mass, number of particles, and moles of a substance.

For example, one mole of a pure substance contains 6.022 x 10²³atoms, molecules, or ions, depending on the nature of the substance. The mole is a useful way to measure large amounts of chemical substances while avoiding the use of cumbersome numbers.

To know more about Avogadro's number, visit:

https://brainly.com/question/28812626

#SPJ1

Find out how many valence electrons there are in total. Step 2: Write down the molecule's skeleton structure. Step 3: Each bond in the skeleton structure is formed by using two valence electrons.

First, the sum of the valencies of each atom determines the total number of valence electrons in the molecule.

The Lewis dot structure gains electrons (number of electrons added equals magnitude of negative charge) if the molecule is an anion.

A Lewis electron dot diagram, also known as an electron dot diagram, Lewis diagram, or Lewis structure, is a way to show the valence electrons in an atom by placing dots around the symbol for the element. The number of valence electrons in the atom is depicted by the diagram's number of dots. The atom symbol is surrounded by dots that represent the electrons in the outer shell. These symbols are referred to as Lewis symbols and electron dot symbols.

Learn more about lewis structure:

brainly.com/question/28384183

#SPJ1

The reaction has a first order in Cl 2 and a second order in NO. The general order of reactions is 2+1 = 3.

We must ascertain the values of the exponents n, m, and p as well as the rate constant, k, in order to derive a rate law. The values of the coefficients required to formulate the rate law are available to us if the reaction orders for a reaction are provided.

The reaction's rate law is rate, starting from the slow step

k'[NOCl2][NO] - (1).

Fast step is used to determine the concentration of NOCl 2, which is an intermediate.

[NOCl 2]=K[NO][Cl2] - (2)

Substitute (2) in (1)

rate=k'K[NO][Cl2][NO]

Hence, rate =k[NO]2[Cl]

The reaction has a first order in Cl 2 and a second order in NO. The general order of reactions is 2+1=3

To know more about concentration, visit:

https://brainly.com/question/17206790

#SPJ1

The amount of energy used by the refrigerator is given in J, kJ, and Cal as follows:

The conversion factor from kilowatt-hours to joules is given below:

1 kWh = 1000 * 3600 J

1 kWh = 3600000 J

The energy used by the frost-free refrigerator is given below as follows:

795 kWh = 795 * 3600000 J

795 kWh = 2.862 * 10⁹ J

795 kWh = 2.862 * 10⁹ J / 1k/J

795 kWh = 2.862 * 10⁶ KJ

1 Joule = 0.24 Cal

2.862 * 10⁹ J = 2.862 * 10⁹ J * 0.24 cal/J

2.862 * 10⁹ J = 6.86 * 10⁸ cal

Learn more about calories and Joules at: https://brainly.com/question/30193709

#SPJ1

Explanation:

The theoretical volume of ammonia that should be produced in the Haber process if we start with 5.0 L of nitrogen (N2) at standard temperature and pressure (STP) can be calculated as follows:

1 mole of N2 reacts with 3 moles of H2 to form 2 moles of NH3

Thus, the number of moles of N2 present can be calculated using the Ideal Gas Law:

PV = nRT

Where n is the number of moles of gas, R is the gas constant, T is the temperature in Kelvin, P is the pressure in atmospheres, and V is the volume in liters.

At STP (0°C and 1 atm), the volume of one mole of gas is 24.45 L.

Given 5.0 L of N2 at STP, the number of moles of N2 can be calculated as:

n = (PV)/RT = (1 atm)(5.0 L)/(0.0821 atmL/molK)(273 K) = 1.96 moles

The number of moles of NH3 produced can then be calculated as:

n = (2 moles of NH3)/(1 mole of N2) = 2 moles/1 mole = 2 moles

The volume of NH3 can be calculated as:

V = nRT/P = (2 moles)(0.0821 atmL/molK)(273 K)/(1 atm) = 44.8 L

So, the theoretical volume of ammonia (NH3) that should be produced if we start with 5.0 L of N2 at STP is 44.8 L.

More molecules in a fixed volume means more pressure.

According to the context, the term may or may not include ions that meet this requirement. A molecule is a collection of two or more atoms held together by attractive forces known as chemical bonds.

Hence, it can be seen that an increase in the number of gas molecules, while container volume stays constant, increases pressure.

A decrease in container volume increases gas pressure. An increase in the temperature of a gas in a rigid container increases the pressure

Read more about molecules here:

https://brainly.com/question/26044300

#SPJ1