As it pulls itself up to a branch, a chimpanzee accelerates upward at 2.4 m/s2 at the instant it exerts a 260-N force downward on the branch.Find the magnitude of the force the chimpanzee exerts on the Earth.

Answer:

the frequency of this mode of vibration is 138.87 Hz

Explanation:

Given;

length of the copper wire, L = 1 m

mass per unit length of the copper wire, μ = 0.0014 kg/m

tension on the wire, T = 27 N

number of segments, n = 2

The frequency of this mode of vibration is calculated as;

[tex]F_n = \frac{n}{2L} \sqrt{\frac{T}{\mu} } \\\\F_2 = \frac{2}{2\times 1} \sqrt{\frac{27}{0.0014} }\\\\F_2 = 138.87 \ Hz[/tex]

Therefore, the frequency of this mode of vibration is 138.87 Hz

Answer:

A. You find sheets of copper (Cu) used in an induced rescue factory scene

Explanation:

I would use a sheets of copper (Cu) used in an induced rescue factory scene because, copper is a metal and the only material out of the other options that would only dent and not crumble when hit by the lead pipe.

The other options in B - D are non-metals.

Phosphorus is a non-metal and is used as an explosive and thus cannot be used.

Helium is a gas used in filling balloons and thus cannot be used.

Chlorine is used in killing bacteria and thus cannot be used.

So, copper is the only option available since it is a metal and can thus accommodate a large force.

So, option A is the answer.

Explanation:

For engine 1,

Energy removed = 239 J

Energy added = 567 J

[tex]\eta_1=\dfrac{239}{567}\cdot100=42.15\%[/tex]

For engine 2,

Energy removed = 457 J

Energy added = 789 J

[tex]\eta_2=\dfrac{457}{789}\cdot100=57.92\%[/tex]

For engine 3,

Energy removed = 422 J

Energy added = 1038 J

[tex]\eta_3=\dfrac{422}{1038}\cdot100=40.65\%[/tex]

So, the engine 2 has the highest thermal efficiency.

Answer:

4.7 GHz

Explanation:

Applying,

v = λf................. Equation 1

Where v = velocity of the radio wave, λ = wavelength, f = frequency

make f the subject of the equation

f = v/λ.............. Equation 2

Note: A radio wave is an electromagnetic wave, as such it moves with a velocity of 3.00 x 10⁸ m/s

From the question,

Given: λ = 0.0644 meters

Constant: v = 3.00 x 10⁸ m/s

Substitute these values into equation 2

f = (3.00 x 10⁸)/0.0644

f = 4.66×10⁹ Hz

f = 4.7 GHz

Answer:

Young's modulus for the rope material is 20.8 MPa.    

Explanation:

The Young's modulus is given by:

[tex] E = \frac{FL_{0}}{A\Delta L} [/tex]

Where:

F: is the force applied on the wire

L₀: is the initial length of the wire = 3.1 m

A: is the cross-section area of the wire

ΔL: is the change in the length = 0.17 m

The cross-section area of the wire is given by the area of a circle:

[tex] A = \pi r^{2} = \pi (\frac{0.006 m}{2})^{2} = 2.83 \cdot 10^{-5} m^{2} [/tex]

Now we need to find the force applied on the wire. Since the wire is lifting an object, the force is equal to the tension of the wire as follows:

[tex] F = T_{w} = W_{o} [/tex]

Where:

[tex] T_{w} [/tex]: is the tension of the wire

[tex]W_{o} [/tex]: is the weigh of the object = mg

m: is the mass of the object = 1700 kg

g: is the acceleration due to gravity = 9.81 m/s²

[tex] F = mg = 1700 kg*9.81 m/s^{2} = 16677 N [/tex]

Hence, the Young's modulus is:

[tex] E = \frac{16677 N*0.006 m}{2.83 \cdot 10^{-5} m^{2}*0.17 m} = 20.8 MPa [/tex]          

Therefore, Young's modulus for the rope material is 20.8 MPa.                

I hope it helps you!                                    

Answer:

The magnitude of the maximum possible torque exerted on the coil is 5.73 x 10⁻³ Nm

Explanation:

Given;

number of turns of the circular coil, N = 49.5 turns

radius of the coil, r = 5.10 cm = 0.051 m

magnitude of the magnetic field, B = 0.535 T

current in the coil, I = 26.5 mA = 0.0265 A

The magnitude of the maximum possible torque exerted on the coil is calculated as;

τ = NIAB

where;

A is the area of the coil

A = πr² = π(0.051)² = 0.00817 m²

Substitute the given values and solve for the maximum torque

τ = (49.5) x (0.0265) x (0.00817) x (0.535)

τ = 0.00573 Nm

τ = 5.73 x 10⁻³ Nm

Explanation:

(LOOK AT THE IMAGE)

An incoming light ray is partly reflected by the top surface of the soap film and partly reflected by the bottom surface. The wave reflected from the bottom surface has traveled further (an extra distance equal to twice the thickness of the film) so emerges out of step with the top wave. When the two waves meet, they add together, and some colors are removed by destructive interference. Where the film is thickest, the bubble appears more blueish; where it's thinner, it will look more violet or magenta.

[tex]\huge\bold\color{black}{ANSWER}[/tex]

Soap bubble coloring example: INTERFERENCE

Answer: I beleive A

Explanation:

Answer:

A

Explanation:

We can see the light being reflected off the mirror.

Answer:

665.25 Pa

Explanation:

Given data :

Weight of the disk, w = 45 N

Diameter, d = 30 cm

                    = 0.30 m

Therefore, radius of the disk,

[tex]$r=\frac{d}{2}$[/tex]

[tex]$r=\frac{0.30}{2}$[/tex]

   = 0.15 m

Now, area of the cylindrical disk,

[tex]$A=\pi r^2$[/tex]

[tex]$A=3.14 \times (0.15)^2$[/tex]

   [tex]$=0.07065 \ m^2$[/tex]

∴ The gauge pressure at the top of the oil column is :

   [tex]$p=\frac{w}{A}$[/tex]

   [tex]$p=\frac{47}{0.07065}$[/tex]

      = 665.25 Pa

Therefore, the gauge pressure is 665.25 Pa.

The definition of pressure allows to find the result for the pressure at the top of the oil cylinder is:

The pressure is defined by the relationship between perpendicular force and area.

          [tex]P = \frac{F}{A}[/tex]

where P is pressure, F is force, and A is area.

They indicate that the wooden cylinder weighs W = 45.0 N and has a diameter of d = 30 cm = 0.30 m.

The area is:

        A = π r² = [tex]\pi \frac{d^2}{4}[/tex]  

In the attachment we see a diagram of the forces, where the weight of the cylinder and the thrust are equal.

         B-W = 0

          B = W

The force applied to the liquid is the weights of the cylinder. Let's replace.

          [tex]P= \frac{W}{A} \\P = W \frac{4}{\pi d^2 }[/tex]  

Let's calculate.

          [tex]P = \frac{45 \ 4 }{\pi \ 0.30^2 }[/tex] P = 45 4 / pi 0.30²

          P = 636.6 Pa

In conclusion using the definition of pressure we can find the result for the pressure at the top of the oil cylinder is:

Learn more about pressure here: brainly.com/question/17467912

I assume the blocks are pushed together at constant speed, and it's not so important but I'll also assume it's the smaller block being pushed up against the larger one. (The opposite arrangement works out much the same way.)

Consider the forces acting on either block. Let the direction in which the blocks are being pushed by the positive direction.

The 2.0-kg block feels

• the downward pull of its own weight, (2.0 kg) g

• the upward normal force of the surface, magnitude n₁

• kinetic friction, mag. f₁ = 0.30n₁, pointing in the negative horizontal direction

• the contact force of the larger block, mag. c₁, also pointing in the negative horizontal direction

• the applied force, mag. F, pointing in the positive horizontal direction

Meanwhile the 3.0-kg block feels

• its own weight, (3.0 kg) g, pointing downward

• normal force, mag. n₂, pointing upward

• kinetic friction, mag. f₂ = 0.30n₂, pointing in the negative horizontal direction

• contact force from the smaller block, mag. c₂, pointing in the positive horizontal direction (this is the force that is causing the larger block to move)

Notice the contact forces form an action-reaction pair, so that c₁ = c₂, so we only need to find one of these, and we can get it right away from the net forces acting on the 3.0-kg block in the vertical and horizontal directions:

• net vertical force:

n₂ - (3.0 kg) g = 0   ==>   n₂ = (3.0 kg) g   ==>   f₂ = 0.30 (3.0 kg) g

• net horizontal force:

c₂ - f₂ = 0   ==>   c₂ = 0.30 (3.0 kg) g ≈ 8.8 N

Answer:

True. A permanent magnet like the earth produces its own B field due to movement of the iron core. The earths magnetic field is the reason why we have an atmosphere and it also is the only defense against solar flares. A coil of wire or solenoid that has current have so much moving charge that the motion of the electrical charge can create a significant G b-field

Answer:

proton have higher energy than electron

Explanation:

tag me brainliest

Answer:

proton

Explanation:

proton is higher energy than the electron

Answer:

Multiply current in amperes by the length of the circuit in feet to get ampere-feet. Circuit length is the distance from the point of origin to the load end of the circuit.

Divide by 100.

Multiply by proper voltage drop value in tables. The result is voltage drop.

Explanation:

Answer:

Converging (convex) lens.

Explanation:

A lens can be defined as a transparent optical instrument that refracts rays of light to produce a real image.

Basically, there are two (2) main types of lens and these includes;

I. Diverging (concave) lens.

II. Converging (convex) lens.

A converging (convex) lens refers to a type of lens that typically causes parallel rays of light with respect to its principal axis to come to a focus (converge) and form a real image. Thus, this type of lens is usually thin at the lower and upper edges and thick across the middle.

Basically, the image of the object formed by a converging (convex) lens. lens is real, enlarged and inverted.

Answer:

a n c

Explanation:

Answer:

A. TA = TB/2.

Explanation:

Since container A has half as many molecules of the ideal gas in it as container B. Therefore, container A will have half the volume of gas as in container B:

[tex]V_A = \frac{1}{2}V_B[/tex]

Now, from Charle's Law:

[tex]\frac{V_A}{T_A}=\frac{V_B}{T_B}\\\\\frac{1}{2}\frac{V_B}{T_A}=\frac{V_B}{T_B}\\\\T_A = \frac{T_B}{2}[/tex]

Hence, the correct option is:

A. TA = TB/2.

Solution :

Given data :

Mass of the merry-go-round, m= 1640 kg

Radius of the merry-go-round, r = 7.50 m

Angular speed, [tex]$\omega = \frac{1}{8}$[/tex]  rev/sec

                             [tex]$=\frac{2 \pi \times 7.5}{8}$[/tex]  rad/sec

                              = 5.89 rad/sec

Therefore, force required,

[tex]$F=m.\omega^2.r$[/tex]

   [tex]$$=1640 \times (5.89)^2 \times 7.5[/tex]  

   = 427126.9 N

Thus, the net work done for the acceleration is given by :

W = F x r

   = 427126.9 x 7.5

   = 3,203,451.75 J

Answer:

you will get huge electricity bills ............

Answer:

7772.72N

Explanation:

When u draw your FBD, you realize you have 3 forces (ignore the force the car produces), gravity, normal force and static friction. You also realize that gravity and normal force are in our out of the page  (drawn with a frame of reference above the car). So that leaves you with static friction in the centripetal direction.

Now which direction is the static friction, assume that it is pointing inward so

Fc=Fs=mv²/r=1900*15²/55=427500/55=7772.72N

Since the car is not skidding we do not have kinetic friction so there can only be static friction. One reason we do not use μFn is because that is the formula for maximum static friction, and the problem does not state there is maximum static friction.

Answer: hi your question is incomplete attached below is the complete question

1) attached below

2) a)  31 Ω,   302.9 Ω

   b)  17.3 Ω ,  26.4 Ω

Explanation:

1) Deriving Eqn 5-6 from Eqn 5-5

attached below

2) using τ’s calculated and measured resistance

use given data

Tm1 = Rm1 * Cm1

       = 329.3 * 333 * 10^-9 = 109.65 μs

Tm2 = Rm2 * Cm2

       = 329.3 * 200 * 10^-9 = 658.6 μs

a) Capacitance of capacitors

For Cm1

   t₁₂ = 72 μs = R₁' Cm1 log²

 ∴ R₁' = ( 72 * 10^-6 ) / ( 333 * 10^-9 log² )

         = 31 Ω

For Cm2

 t₁₂ = 40 μs  , ∴  R₂' = 302.9 Ω

b) comparing calculated and measured values via percent error

errors

Rm1 - R₁' = 17.3 Ω

Rm2 - R₂' = 26.4 Ω

Answer:

The correct answer is c

Explanation:

Flow is defined by

        Ф =  B . A

bold letters indicate vectors.

The magnetic field is directed to the y axis, The area of ​​the coil is represented by a vector normal to the plane of the coil, so to have a flux

                i.i = j.j = k.k = 1

and the tori scalar products are zero

a) If the coil must be in the xy plane so that its normal vector is in the Z axis, so there is no flux

b) if the coil is in the plane yz the normal veto is in the x axis, so the flux is zero

C) If the coil is in XZ, the normal vector points in the y direction, usually the scalar product is one and there is a flux in this configuration

The correct answer is c

Answer:

1. CaO is not an organic compound because it doesn’t contain a carbon molecule.

2.

Name General Structure Properties/Uses

Alcohol R-OH (contains a hydroxyl group)  Can be poisonous, can be made from fermentation or distillation

Aldehyde R-COH (contains a carbon atom double-bonded to an oxygen and single-bonded to a hydrogen)  Makes up formaldehyde and acetaldehyde

Ketone R-CO-R (contains a carbon atom double-bonded to an oxygen atom and then connected to carbon chains through the other two single bonds)   Makes up acetone

Fatty acid R-COOH (contains a carbon atom double-bonded to an oxygen atom, single-bonded to a hydroxyl, and single-bonded to the carbon chain) Makes up fatty acids like acetic acid and stearic acid; used to form esters

Ether R-O-R (contains double carbon chains connected to an oxygen atom through single bonds)   Ethyl ether is very volatile and flammable, used in veterinary medicine

3. Carbon is able to make four covalent bonds with other elements. This gives it a lot of diversity and the ability to form differently shaped molecules that perform specific functions or fit specific cell receptors in the body. H can form only one bond, and oxygen forms only two bonds, so they don't have as much potential to form a good starting point for organic molecules.

Explanation:

pf

CaO is not an organic compound because it doesn’t contain a carbon molecule.

(which contains a hydroxyl group)  Can be poisonous, can be made from fermentation or distillation

Aldehyde R-COH (contains a carbon atom double-bonded to oxygen and single-bonded to hydrogen)  Makes up formaldehyde and acetaldehyde

Ketone R-CO-1R (contains a carbon atom double-bonded to an oxygen atom and then connected to carbon chains through the other two single bonds)   Makes up acetone

Fatty acid R-COOH (contains a carbon atom double-bonded to an oxygen atom, single-bonded to a hydroxyl, and single-bonded to the carbon chain) Makes up fatty acids like acetic acid and stearic acid; used to form esters11

Ether -O-R (contains double carbon chains connected to an oxygen atom through single bonds)   Ethyl ether is very volatile and flammable, used in veterinary medicine

Carbon can make four covalent bonds with other elements. This gives it a lot of diversity and the ability to form differently shaped molecules that perform specific functions or fit specific cell receptors in the body. H can form only one bond, and oxygen forms only two bonds, so they don't have as much potential to form a good starting point for organic molecules.

Learn more about organic molecules.

https://brainly.com/question/24225576

#SPJ2

Answer:

hmmmmmmmmmmmmmmmmmmmmmmmm y

Answer:

hello the answer is 47m/s

Answer:

1.66 N

Explanation:

The force of gravity of the moon on the body is given by

F = GMm/R² where G = universal gravitational constant = 6.67 × 10⁻¹¹ Nm²/kg², M = mass of moon = 7.2 × 10²² kg, m = mass of body = 1 kg and R = radius of moon = 1.7 × 10⁶ m

Substituting the values of the variables into the equation, we have

F = GMm/R²

F = 6.67 × 10⁻¹¹ Nm²/kg² × 7.2 × 10²² kg × 1 kg/(1.7 × 10⁶ m)²

F = 48.024 × 10¹¹ Nm²/2.89 × 10¹² m²

F = 16.62 × 10⁻¹ N

F = 1.662 N

F ≅ 1.66 N

So, the gravity on the moon is 1.66 N

Answer:

changing the N to S. that's how the error will be corrected

Answer:

C is the correct answer

Explanation:

i took the test

Answer:

Decreases

Explanation:

because its moving against gravitational attraction and at maximum height its velocity will be and it will decrease until it reaches maximum height and the start to increase again