Anyone know this answer, homework due tomorrow

Magnesium would be a good selection as the sacrificial electrode in the cathodic protection of tin (Sn).

Why is magnesium used as a sacrificial anode?

Chemically, magnesium is oxidation resistant and this is because its surface is covered with a thin layer of oxide which protects it from being vulnerable to air. This is why it is highly suitable for use in sacrificial anodes to limit the effects and susceptibility of other metal surfaces to corrosion.

What is the best sacrificial anode?

Magnesium anodes are the most active and are the only anodes that work well in the low conductivity of fresh water. Magnesium is also relatively non-toxic to aquatic life.

Why is tin resistant to corrosion?

Tin has good corrosion resistance properties in gas, weak base, and weak acid environment at room temperature because the super potential of hydrogen on the metal tin is high.

To know more about sacrificial electrodes:

https://brainly.com/question/28168422

#SPJ4

The concentration of hydrogen ions in a solution with a pH of 4 is [tex]1 x 10^-4 M.[/tex]

The pH of a solution is a measure of the acidity or basicity of the solution and is defined as the negative logarithm of the hydrogen ion (H+) concentration in the solution. The pH scale ranges from 0 to 14, with values less than 7 indicating an acidic solution and values greater than 7 indicating a basic solution. A neutral solution has a pH of 7.

To calculate the hydrogen ion concentration (in units of M) from the pH of a solution, the formula [tex][H+] = 10^-pH[/tex] can be used. For example, in a solution with a pH of 4, the hydrogen ion concentration can be calculated as [tex][H+] = 10^-4 = 1 x 10^-4 M[/tex]. This means that in a solution with a pH of 4, there is a concentration of [tex]1 x 10^-4 M[/tex] hydrogen ions present.

It's important to note that the pH of a solution can be used to determine the relative acidity or basicity of a solution, but it cannot be used to determine the actual amount of hydrogen ions or other species present in the solution. To determine the actual concentration of species in a solution, it is necessary to perform a quantitative analysis using techniques such as titration or spectrophotometry.

You can learn more about pH of a solution at

https://brainly.com/question/172153

#SPJ4

There has to be 1.87 g of sucrose to be added to 537 g of water to make a solution with the specified vapor pressure.

Vapor Pressure Sucrose Solution

The vapor pressure of a solution is related to the concentration of solute particles in it. The decrease in vapor pressure, ΔP, is proportional to the molality of solute, m, in the solution: ΔP = -kPm, where k is a constant and P is the vapor pressure of pure water.

Since the vapor pressure of the solution is 0.513 mmHg less than that of pure water, we can write:

17.5 mmHg - 0.513 mmHg = 17.0 mmHg = -kP * m

Rearranging and solving for m, the molality, we have:

m = - ΔP / (kP) = 0.513 mmHg / (17.5 mmHg) = 0.0293 mol/kg.

We can then use the molality to find the amount of solute (sucrose) in grams needed to make the solution:

m = 0.0 293 mol/kg = 0.0 293 mol / (537 g) = 5.47 x 10^-5 mol

Finally, using the molar mass of sucrose, we can find the number of grams of sucrose needed:

5.47 x 10^-5 mol * 342.3 g/mol = 1.87 g.

So, 1.87 g of sucrose must be added to 537 g of water to make a solution with the specified vapor pressure.

Learn more on vapor pressure here https://brainly.com/question/2693029

#SPJ1

The pOH of a 0.2 m HCl solution is 13.3.

Concentration is the ability to focus on a particular task or activity, blocking out distractions and using cognitive resources efficiently. It is a key factor in achieving success in any area, whether it be in school, the workplace, sports, or leisure activities. Concentration requires a person to be able to pay attention to a specific task over a long period of time, while blocking out irrelevant or competing stimuli.

It also involves the ability to sustain focus and effort, even when faced with challenging or tedious tasks. Developing concentration skills can be beneficial in many aspects of life, including improved academic performance, increased productivity, better decision-making, and better problem-solving skills. Practicing mindfulness, taking regular breaks, and organizing tasks can all help to improve concentration.

pH=-log10[H+]

pH=-log10[0.2]

pH=0.7

You can then enter this into the equation

pH + pOH = 14

placing our pH value into this we get

0.7 + pOH = 14

You can rearrange this to find

pOH = 14–0.7

which means

pOH=13.3

To learn more about concentration

https://brainly.com/question/28564792

#SPJ4

The correct option is A. Methanol. When acetaldehyde is treated with LiAlH4, followed by aqueous then methanol will produce.

When acetaldehyde is treated with LiAlH4, the reaction results in the reduction of the aldehyde group to an alcohol. The LiAlH4 reacts with the acetaldehyde to form a charged intermediate species known as an enolate.

The enolate then undergoes hydrogenation, resulting in the production of methanol. Following the reaction, an aqueous workup is performed to hydrolyze the enolate and separate any impurities from the product. The aqueous workup also ensures that the LiAlH4 is completely neutralized, thus allowing for the recovery of the methanol as the major product.

Learn more about methanol:

https://brainly.com/question/30350012

#SPJ4

The amount of heat required to raise the temperature of the system through 1°C is defined as the heat capacity of the system. The kilocalories of heat needed to heat the water from 62.0 °F to 105.0 °F is  40877.01.  

The quantity of heat required to raise the temperature of one gram of the substance through 1°C is known as the specific heat capacity. It is usually denoted by c.

The equation connecting the specific heat capacity with the heat is given as:

q = mc (T₂ - T₁) = mc Δ T

1 gallons = 3.785 L

450 gallons = 450 × 3.785 = 1703.25 L

Density of water is 1 g/cm³

Then the mass of water is, m = Density × Volume

m = 1703.25 L × 1000 mL/ 1L × 1.0 g / 1mL × 1kg / 1000g

m = 1703 .25 kg

The temperature in °F can be converted into °C as:

T°C = T°F - 32 / 1.8

T₁ = 62 -32 / 1.8 = 17°C

T₂ = 105 - 32/ 1.8 = 41°C

Δ T = T₂ - T₁  = 41 - 17 = 24°C

q = 1703.25 kg × 4.184 kJ/kg K × 24°C

q = 171033.552 kJ

1 kilojoule = 0.239 kilocalorie

171033.552 kJ = 40877.01 kilocalorie

Thus the heat required in kilocalorie is 40877.01.

To know more about specific heat capacity, visit;

brainly.com/question/29766819

#SPJ1      

The number of molecules in a certain number of moles can be calculated by multiplying the number of moles by Avogadro's number, which is approximately equal to 6.022 x [tex]10^{23}[/tex].

So, for 1.64 moles of Br2, the number of molecules would be:

1.64 moles × 6.022 x [tex]10^{23}[/tex] molecules/mole = 9.937 x [tex]10^{23}[/tex] molecules

Therefore, 1.64 moles of Br2 would contain approximately 9.937 x [tex]10^{23}[/tex] molecules.

The number of atoms, ions, or molecules in one mole of a substance is a key constant in chemistry. Named for the Italian scientist Amedeo Avogadro, it has a definition of 6.02214076 x [tex]10^{23}[/tex] particles per mole. Based on a sample's mass or molar quantity, this number is used to determine the number of atoms, ions, or molecules present. It is crucial for figuring out chemical reactions, putting chemical amounts into perspective, and figuring out how many particles are in a sample. The proportionality factor that connects the number of constituent particles in a sample with the amount of substance in that sample is called the Avogadro constant, often known as NA or L.

To know more about Avogadro's number, check out:

https://brainly.com/question/27553295

#SPJ1

A cation's name, symbol, and charge must be noted in order to determine the ionic compound's formula.The symbols for sodium and oxygen are respectively Na+ and O2.Na2O is the resultant substance.

To learn more about ionic formula refer

https://brainly.com/question/30444643

#SPJ1

The major organic product of the reaction conditions shown is the following:

The structure shows the major organic product with all lone pairs of electrons included. No inorganic byproducts are present.

The organic product shown is an alkene, specifically a 1,3-butadiene, which is a molecule made up of two carbon atoms double-bonded together and four hydrogen atoms attached to the carbons. This type of molecule is an important building block for organic synthesis, as it can be used to create polymers, polystyrene, and other materials.

Learn more about  organic product of the reaction:

https://brainly.com/question/27119170

#SPJ4

When water freezes at its typical freezing point, its entropy changes to [tex]-22.08 J/mol K[/tex].

Entropy is a metric for how chaotic or unpredictable a system is. The quantity of energy in a thermodynamic system that is not usable for work is measured using this notion, which is utilised in thermodynamics and statistical mechanics. It is frequently referred to as the system's level of chaos or disorder.The change in entropy of water at its normal freezing point is given by the expression:

ΔS = -ΔH/T

Where ΔH is the enthalpy of fusion of water, which is 6.01 kJ/mol, and T is the freezing point of water, which is 273.15 K.

The change in entropy of water when it freezes at its normal freezing point is:

ΔS = [tex]\frac{-6.01 kJ/mol }{ 273.15 K}[/tex]

ΔS = [tex]-22.08 J/mol K[/tex]

Therefore, The change in entropy of water when it freezes at its normal freezing point is:-22.08J/molK

learn more about Entropy Refer:brainly.com/question/13386678

#SPJ4

The minimum energy 0 of a photon capable of ejecting electrons from a metal with 0=5.43×1014 s−1 is 3.597 × 10⁻¹⁹ J. The maximum kinetic energy electron of electrons ejected from this metal by light with a wavelength of 245 nm is 6.46 × 10⁻¹⁹ J.

The term kinetic energy is defined as the energy of motion, observable as the movement of an object or subatomic particle.

The formula for the minimum energy required to eject electrons from the metal that has the threshold frequency is;

E = hν

Where;

h is Planck's constant = 6.626 × 10⁻³⁴ J.s

ν is threshold frequency

So,

E = 5.43 × 10¹⁴ × 6.626 × 10⁻³⁴

E = 3.597 × 10⁻¹⁹ J

We can find the energy provided by the light using the Planck-Einstein equation. First, we need its frequency, which can be calculated from the following expression:

c = λ × ν

where,

c is the speed of light (3.00 × 10⁸ m/s)

λ is the wavelength

Then,

Let's call total energy T.

T = h . ν

= 6.63 × 10⁻³⁴ J . s × 1.28 × 10¹⁵ s⁻¹

= 8.49 × 10⁻¹⁹ J

From the total energy provided by the light (T), a part is used to eject the electron (E) and another part goes to the kinetic energy of the electron (K).

T = E + K

K = T - E

= 8.49 × 10⁻¹⁹ J - 2.03 × 10⁻¹⁹ J

= 6.46 × 10⁻¹⁹ J

Thus,  the minimum energy 0 of a photon capable of ejecting electrons from a metal with 0=5.43×1014 s−1 is 3.597 × 10⁻¹⁹ J. The maximum kinetic energy electron of electrons ejected from this metal by light with a wavelength of 245 nm is 6.46 × 10⁻¹⁹ J

To learn more about the kinetic energy, follow the link;

https://brainly.com/question/15764612

#SPJ1

Answer:

0.74 moles of hydrogen

Explanation:

f 0.37 mol of oxygen reacts, then the number of moles of hydrogen will also be 0.37 mol. According to the equation, 2 moles of hydrogen are required to react with 1 mole of oxygen, so 2 * 0.37 = 0.74 moles of hydrogen will react with 0.37 mol of oxygen.

The correct answer is. D) The number of protons and the number of neutrons are always the same in the neutral atom is false. The number of neutrons in an atom can vary, leading to different isotopes of the same element.

Atomic structure is defined by the number of protons, electrons, and neutrons in an atom. Protons and electrons determine the atomic number and the identity of an element, while neutrons provide additional mass to the atom. The number of protons and electrons in an atom is always equal, giving the atom a neutral charge. However, the number of neutrons in an atom can vary, leading to different isotopes of the same element.

Isotopes of an element have the same number of protons, but different numbers of neutrons. As a result, they have different atomic masses, but the same atomic number. This is why isotopes of the same element have similar chemical properties, but different physical properties. For example, isotopes of carbon, such as carbon-12 and carbon-14, have different numbers of neutrons and thus different atomic masses, but the same number of protons and the same chemical properties.

Learn more about protons

brainly.com/question/11014306

#SPJ4

The equation for the temperature change of the solution when 15 ml of 0.01 M HCl is mixed with ml of 0.01 M NaOH is:

HCl + NaOH → NaCl + H2O

Where nHCl is the amount of moles of HCl and ΔHCl is the molar heat of reaction of HCl, and nNaOH is the amount of moles of NaOH and ΔNaOH is the molar heat of reaction of NaOH.

The temperature change of a solution is determined by the amount of heat energy it absorbs or releases during a reaction. For example, when a solute dissolves in a solvent, it can cause the temperature of the solution to rise or fall.

This is because the solute absorbs or releases heat energy in order to break the intermolecular forces between the solvent molecules and the solute molecules. Additionally, when two solutions are mixed, their temperatures may change due to endothermic or exothermic reactions.

Learn more about temperature change of a solution:

https://brainly.com/question/27988898

#SPJ4

The chair conformation is obtained by a  flip of the boat conformation.

In this conformation, the cyclohexane ring is bent into a chair-like shape, with alternating bonds in the ring adopting a "up" or "down" orientation.

The chair conformation is a very stable arrangement of bonds in cyclohexane, and it is the most common conformation observed in this type of molecule. The stability of the chair conformation is due to the fact that all of the bond angles in the ring are nearly tetrahedral, which is the preferred arrangement for carbon bonds. The chair conformation is also significant because it represents a compromise between the ring's need to minimize strain and its need to maintain its rigidity.

Learn more about conformation of molecules:https://brainly.com/question/2114821

#SPJ1

Answer:

Explanation:

one half mole or 76 grams of Iron (II) Sulfate.

Convert the number of atoms to moles. The Avogadro's constant, N, is 6.022 x 10^23 atoms/mole.

So, the number of moles is given by:

(2.64 x 10^24 atoms) / (6.022 x 10^23 atoms/mole) = (2.64 x 10^24 atoms) / 6.022 x 10^23 moles/atom

= 4.4 moles

Therefore, there are 4.4 moles in 2.64 x 10^24 atoms of He.

The smallest piece of stuff that still possesses an element's characteristics is an atom. Protons, neutrons, and electrons are the three different sorts of particles that make them up. The nucleus, or core, of an atom, is made up of protons and neutrons, with electrons revolving around it. What element the atom depends on how many protons are in the nucleus. All matter in the cosmos is made up of molecules, which are created when atoms join together to form bonds. Atoms can also disintegrate into smaller forms of matter or react chemically with other atoms to create new substances. Modern chemistry and physics both depend critically on our understanding of atoms and how they interact with one another.

To know more about atoms, check out:

https://brainly.com/question/13518322

#SPJ1

Removing the first H+ from H2SeO3(aq) requires less energy that the Removing the second H+, because the second H+ is removed from the Negatively charged species.

Find attached file of explanation of step-wise dissociation of selenous Acid, H2SeO3 (aq).

Reason: H2SeO3 is neutral molecule. Due to high electronegativity of O In O-H bond, it dissociates to release a proton.

But HSeO3-, is a negatively charged species and so, it is difficult to Abstract a proton from this ion. So, the value of Ka2 is so much smaller than the value of Ka1Ka2 is smaller.

To learn more about Selenous acid

https://brainly.com/question/28777981

#SPJ4

-- The given question is incomplete, did not get the complete question anywhere, so answer the question in general way. --

The limiting reactant in the given equation [tex]Zn + 2HCl \rightarrow ZnCl_2 + H_2[/tex] is Zn. The correct answer is option A.

The limiting reactant, also known as the limiting reagent, is the substance that is completely consumed or in a chemical reaction, thereby determining the maximum amount of product that can be formed.

To determine the limiting reactant, we need to compare the stoichiometric ratios of the reactants to see which one will be completely consumed first.

In the balanced equation, the stoichiometric ratio between zinc (Zn) and hydrochloric acid ([tex]HCl[/tex]) is [tex]1:2[/tex], meaning that one mole of Zn reacts with two moles of [tex]HCl[/tex].

Given that,

we have 2.1 moles of Zn and 6.0 moles of [tex]HCl[/tex], we can calculate the number of moles of [tex]HCl[/tex] needed to react with 2.1 moles of Zn by multiplying 2.1 moles of Zn by the stoichiometric ratio:

2.1 moles Zn[tex]\times[/tex] (2 moles [tex]HCl[/tex]/ 1 mole Zn) = 4.2 moles HCl

Since, we have 6.0 moles of [tex]HCl[/tex], which is greater than the 4.2 moles required to react with 2.1 moles of Zn, [tex]HCl[/tex] is present in excess.

Therefore, the limiting reactant in the given equation [tex]Zn + 2HCl \rightarrow ZnCl_2 + H_2[/tex] is zinc (Zn), as it will be completely consumed before all the [tex]HCl[/tex] can react. Option A is the correct answer.

Learn more about limiting reactant here:

https://brainly.com/question/33417913

#SPJ2

Answer:

C, Carbon

Explanation:

Write the symbol for every chemical element that has atomic number greater than 6 and atomic mass less than 25.2 u.

Record the value. Also, determine whether the pH stayed the same, became more acidic, or became more alkaline compared to the first test.

Alkaline water has a higher pH level than that of plain tap water. So proponents say that it can neutralize acid in your bloodstream. Some say that alkaline water can help prevent disease, such as cancer and heart disease.

Most fruits and vegetables, soybeans and tofu, and some nuts, seeds, and legumes are alkaline-promoting foods, so they're fair game. Dairy, eggs, meat, most grains, and processed foods, like canned and packaged snacks and convenience foods, fall on the acid side and are not allowed.

To know more about alkaline visit

https://brainly.com/question/11584594

#SPJ1

The answer is 1) high vapor pressure = weak IMF, 2)high surface tension = strong IMF, 3) high viscosity = strong IMF, 4) high boiling point = strong IMF.

The strength of the intermolecular forces (IMF) is directly related to the boiling point of the compound. The higher the boiling point, the stronger the IMF. This is because a stronger IMF requires more energy to separate them, resulting in a higher boiling point.

The strongest IMFs involved in determining the boiling point of a compound are London dispersion forces (LDF), dipole-dipole interactions, and hydrogen bonding.

To know more about  intermolecular forces (IMF):

brainly.com/question/28196538

#SPJ4

The author does not provide a description of Mirwais's voice in the article. The three quotations from Mirwais suggest that he is determined and passionate about his music.

He states that he wants to "sing for peace" and that he "believes in the power of music to heal." He also expresses his desire to "spread joy and love" through his music.

The author chose Mirwais Najrabi as the subject of his article because he wanted to highlight the story of a young, talented musician who is overcoming adversity to pursue his passion. The choice of Mirwais as the subject suggests that the main purpose of the article is to inspire and encourage others to pursue their dreams and to show the positive impact that music can have on individuals and communities.

The unity of the article is good. Each paragraph develops the main idea of the young singer's story, and the overall message is that music can be a source of hope and inspiration for individuals and communities. The article flows well, and the use of quotations from Mirwais helps to reinforce the main idea and message.

Learn more about author on:

https://brainly.com/question/12851463

#SPJ1

A sample of ground beef contains 18.9% protein and 21.4% fat both by mass. Therefore, 147.5kilocalories are in 125g of the ground beef.

The calorie is an energy unit derived from the now-defunct thermodynamic theory of heat. Two primary meanings of "calorie" are widely used for historical reasons.

Originally, a big calorie, meal calorie, dietary calorie, and kilo calorie was defined as the quantity of heat required to increase the temperature with one kilogram of water through one degrees Centigrade (or one kelvin). The amount of heat required to create the same rise in one gram of water was characterized as a tiny calorie or gram calorie.

Let the required calorie of ground beef be m .

protein in it = .18m

fat in it =  .21m

1 gram of protein gives 4 cals .

1 gram of fat gives 9 cals .

4 x .18m  + 9 x  .21m = 350

m = 147.5kilocalories

Therefore, 147.5kilocalories are in 125g of the ground beef.

To know more about calories, here:

https://brainly.com/question/29096838

#SPJ1

Electron configurations written down. The energy level (the period) should come first when writing an electron configuration, followed by the subshell that needs to be filled and the superscript.

The energy levels of the electronic orbitals are 1s 2s 2p 3s 3p. Due to the fact that one atom can have numerous electronic orbitals, energy levels are classified as particular quantum numbers: 1s, 2s, 3s, 4s, 3d, 4p, 5s, 4d, 5p 7s 5f 6d 6p 4f 5d 6p. The orbital angular momentum quantum number, indicated by l, can be understood.

Let's list the elements that have changed. The following is anticipated

Every stable electron configuration element gains the maximum D- Te Te +2 2- Po Pot2 +2 se se Hele as well as all other elements. Be Be 12 нд Mg+2 2n+2

To learn more about Electron configurations here:

https://brainly.com/question/29157546

#SPJ4

Nixon's visit to China prove to the US that A. If you can deal with one communist nation, others will likely join in.

The 37th President of the United States (US) Richard Nixon is known for his resistance to the spread of the ideology of communism, especially that of the Soviet Union and China.

However, when there was a rift between the Soviet Union and China in the mid-1960s, US leaders including Nixon used this moment as an opportunity to overthrow communism.

The rift in relations stems from China's protest which considers Russia to have made a policy of counter-revolutionary diplomacy and reduced the expansion of the influence of communism, especially with the United States.

During a meeting with China in 1960, the Soviet Union reasoned that diplomacy with the US needed to be more fluid to avoid tensions, at a time when the two countries had nuclear weapons.

Learn more about President Nixon at

https://brainly.com/question/16290910

#SPJ1

The bonds between atoms are one place where potential energy is stored of potential energy found in a container full of a chemical substance in liquid form.

A chemical substance is a shape of matter having a steady chemical composition and feature residences. a few references add that chemical substances can't be separated into their constituent elements by way of bodily separation methods, i.e., without breaking chemical bonds.

A chemical substance is a form of count number having a constant chemical composition and characteristic properties. some references upload that chemical substances can not be separated into their constituent factors via physical separation strategies, i.e., without breaking chemical bonds. Chemical materials are factors, compounds, or mixtures: elements are just the one's materials that don't have any others as components. factors in this sense are the constructing blocks of chemical composition.

To learn more about Chemical substances visit here:

brainly.com/question/29637836

#SPJ4