Answers
Answer:
the first one is stay in motion and stay at rest
the second one is unbalanced and accelerate
i can't see the third one but i think it is equal because it may say Newton's third law states that...
Explanation:
Answer:
1. Stay in motion
2. Stay at rest
3. Unbalanced
4. Accelerate
Explanation:
Fill in the Blanks in this order and you will get it correct
Related Questions
Please help me whit this question
Answers
Answer:
Gypsum
Explanation:
Gypsum is a soft sulfate mineral composed of Calcium Sulfate di-hydrate. It is widely used in composition of fertilizer. It is also known as land plaster. On adding gypsum to soil, the quality of soil is improved. It conditions the soil and adds nutrients. The properties of soil is improved. Hence, the correct answer is Gypsum.
Hope this helped:)
pls mark brainlist
PLEASE HELP ME WILL MARK BRAINLIEST
Answers
Answer: The answer is b
What state has the longest coast
Answers
Alaska has 33,904 miles of coastline, the longest in the United States.
when discussing the earths magnetic field we could say that the earth has a
Answers
North Magnetic Pole
Read more on Brainly.com - https://brainly.com/question/2410117#readmore
select all that apply so it’s not just one answer. please and thanks :))
Answers
Explain the energy conversions that take place during combustion?
Answers
which types of materials have a molecular structure that makes them good conductors explain how understanding this relationship can help people design more efficient technologies
Answers
Answer: Metals
Explanation:
The metals are the conductors of electricity. These are made up of atoms which conducts electricity in the form of electrons in the outer shell that can move freely. These take away the electric charge on the entire metallic system. This way the metal conducts electricity and can also pass electricity to other surfaces if come in their contact. Thus the metals are used for creating equipment of technological importance.
Answer:
Metals
Explanation:
1) Johnny completing the spring lab, and makes 12 waves in 10 seconds. What is the
frequency of the waves Johnny makes?
Answers
Answer:
1.2 Hz
Explanation:
Frequency: This can be defined as the number of cycles completed in one seconds. The unit of frequency is Hertz (Hz)
From the question above,
f = N/t.................... Equation 1
Where f = frequency, N = number of wave or cycle completed by Johnny, t = time take to complete the waves.
Given: N = 12 waves, t = 10 s
Substitute into equation 1
f = 12/10
f = 1.2 Hz
**PLEASE QUICKLY **A circuit has a resistance of 250 and is powered by a 120 V battery
The current in the circuit, to the nearest tenth, is
____А.
Answers
Answer:
Current, I = 0.48 A
Explanation:
We have,
Resistance of a circuit is 250 ohms
Voltage of the battery is 120 V
It is required to find the current flowing in the circuit. Let I is the electric current. Ohm's law is given by :
[tex]V=IR\\\\I=\dfrac{V}{R}\\\\I=\dfrac{120}{250}\\\\I=0.48\ A[/tex]
So, the current in the circuit is 0.48 A.
I just need a full answer here not only so I can answer the question, but also so that I can learn.
Locate the main groups of elements in each column on the periodic table, and identify the number of valence electrons there are in each element in a particular group. Infer why some elements are more reactive than others due to their number of valence electrons.
Answers
Answer: Number of valence electrons determine how fast or easy for an atom to gain stability. Either by gaining electrons or by losing electrons.
Group one and seven elements react fast because they only have one electron to gain or lose.
Explanation:
Number of valence electrons tell us the number of electrons an atom will gain or lose in order to attain stability in electron configuration.
All the elements in a particular group will have the same number of valence electrons as follows:
Group one - 1 valence electron
Group two - 2 valence electrons
Group three - 3 valence electrons
Group four - 4 valence electrons
Group five - 3 valence electrons
Group six - 2 valence electrons
Group seven - 1 valence electron
Group eight - 0 valence electron
Some elements are more reactive than the others because of the electron affinity, oxidation state and electronegativity of the atoms
For instance, elements in group 7 are more reactive than others because of their oxidation state and they have very high electronegativity.
Also, group one elements are more reactive because they only have one electron to loose.
The diagram shows the field lines near the poles, X and Y,
of two magnets
Based on the field lines, what are the poles of the
magnets?
O X: north
Y south
X: south
Y north
X north
Y north
Х
Y
X south
Y south
Answers
Answer:
The answer is C. X:north Y: north
Explanation:
Just took the test
Based on the field lines poles of the magnets X=North and Y=south
What are the poles of X and Y?Every magnet has the two poles that is north and the south. similarly earth also have two poles north and south and acts as a magnet.
just from that concepts the filed lines near the poles X and Y of the two magnets have north poles.
Hence based on the field lines poles of the magnets X=North and Y=south
To know more about Magnet and magnetic field follow
https://brainly.com/question/14411049
A negative test charge experiences a force to the right as a result of an electric field. Which is the best conclusion to draw
based on this description?
The electric field points to the left because the force on a negative charge is opposite to the direction of the field.
The electric field points to the right because the force on a negative charge is in the same direction as the field
O No conclusion can be drawn because the sign of the charge creating the field is unknown
O No conclusion can be drawn because the amount of charge on the test charge is unknown
Answers
Answer:
The correct option is (A).
Explanation:
The direction of electric force is in the direction of electric field. The electric force acting on a charged particle is given by :
F = qE, q is magnitude of charge
We have, a negative test charge experiences a force to the right as a result of an electric field. It would mean that the electric field points to the left because the force on a negative charge is opposite to the direction of the field.
A scientist places a strip of hot metal on top of a block of another metal with a lower melting point. The second metal quickly melts. What is the main type of heat transfer responsible?
Select one:
a. Convection, because the metals touch and cold from the block moves to the warmer strip of metal, cooling it down
b. Conduction, because both metals are in the sun and melt as the sun's rays heat them
c. Convection, because heat from the strip of metal heats the air around it, and then that warm air heats the metal block
d. Conduction, because the heat energy is absorbed by the metal atoms in the block. Once they have absorbed enough energy, they become liquid
Answers
Answer:
D:
Explanation:
Conduction because the heat energy is transferring directly from the separate metals convection involves "currents" like in a liquid or a gas. When you turn on the stove with a pot of water on the burner the water at the bottom of the pot gets heated first almost immediately this water rises and cooler water falls. Basically the water is "stirring" or shifting, exchanging the heat energy this is why water heats so evenly.
Answer:
D
Explanation:
The heat transfer that we'll have will be:
- At first, the metal bar will emanate heat through radiation, to the atmosphere, and to the second metal, through conduction.
- Because of this, the second bar will start to increase it's temperature, up to the fusion point, spending the energy received on the fusion, and also radiating heat to the atmosphere. It won't emit heat in any other form, since heat transmission can happen only from a hot body to a cooler one, and the only things in contact are the two bars.
Which sentences describe the cyclone device?
A cyclone device accumulates fine particulates from the air by making a dirty air stream flow in a spiral path inside a
cylindrical chamber. It consists of several long and narrow fabric filter bags suspended upside-down in a large
enclosure. When dirty alr enters the chamber, the larger particulates strike the chamber wall and fall into a conical dust
hopper at the bottom. Fans blow dirt-filled air upward from the bottom of the enclosure, trapping dirt particles inside the
filter bags and releasing clean air from the top. The top of the chamber has an outlet that lets out cleaned air.
Answers
Answer: Option A
Explanation:
A cyclone device is an instrument which measures the cyclone. In this case the device collects the particulates mixed in air which makes the air dirty.
It revolves inside the cylindrical chamber in a forming a spiral path. This is what a cyclone is.
In real, the cyclone is also the same but is so huge that it carries away the things coming in its path. These things can be homes, trees and other materials.
This is very destructive and cause loss of life and loss of assets.
what is the resistance of a toaster that uses 2A when connected to a 120V power source?
Answers
Answer:
60 ohms
Explanation:
From Ohm's Law:
V = IR
Where V = 120volts
I = 2A
R = ?
Note that R,V and I represents resistance, voltage and current respectively.
Substituting the above values into the formula.
V = IR
120v = 2×R
120= 2R
Making R the subject
R =120/2
R = 60 ohms
Hence the resistance of the toaster will be 60 ohms.
A fisherman noticed that a float makes 30 oscillations in 15 seconds. The distance between two consecutive crests is 2 m. What is the period and frequency of the wave? What is the wave speed?
Answers
Answer:
Period T = 0.5 s
Frequency F = 2 Hz
Wave speed V = 4 m/s
Explanation:
Given that the
Number of oscillations = 30
Time taken = 15 seconds
The distance between two consecutive crests is called wavelength
Wavelength = 2m
Period is the ratio of time and the number of oscillations
Period T = 15/30 = 0.5 seconds
Frequency F is the reciprocal of period. That is,
F = 1/T
F = 1/0.5 = 2Hz
Wave speed V is the product of frequency and wavelength
V = 2 × 2 = 4m/s
Answer:
Answer:
Period T = 0.5 s
Frequency F = 2 Hz
Wave speed V = 4 m/s
Explanation:
What energy transformation takes place in a fire?
radiant energy to thermal energy
thermal energy to nuclear energy
chemical energy to thermal energy
Answers
Answer:
Chemical Energy To Thermal Energy
Explanation:
Fire is a chemical reaction. So, because of chemical reactions, the temperature raises to ignition temperature and results as fire. And then it releases photons(that generates heat after being hit by any other matter)
Answer:
Coal is burned at a power plant. The chemical energy released as the coal is burned heats water and turns it into steam.
Explanation:
If that makes since!
5. While working near flammable
substances, one should avoid iron or steel
hand tools.
O (A) True
O (B) False
Answers
Answer:
true
Explanation:
iron or steel tools can be dangerous ignition source
Answer:
(A) True...
Explanation:
Below image, please give me the answer quick.
Answers
Answer:
Option A. ⅓V
Explanation:
We'll begin by calculating the total resistance in the circuit. This is illustrated below:
R1 = 1Ω
R2 = 2Ω
R3 = 3Ω
RT =..?
Since all three resistor are in series connections, the total resistance can obtain as follow:
RT = R1 + R2 + R3
RT = 1 + 2 + 3
RT = 6Ω
Next we shall determine the current flowing through the circuit.
Voltage (V) = 2V
Resistor (R) = 6Ω
Current (I) =..?
V = IR
2 = I x 6
Divide both side by 6
I = 2/6
I = ⅓A
Finally, we can obtain the voltage across the 1Ω resistor as follow:
Resistor (R) = 1Ω
Current (I) = ⅓A
Voltage (V) =?
V = IR
V = ⅓ × 1
V = ⅓V
Therefore, the potential difference across the 1Ω resistor is ⅓V
Current electricity is _____________________.
build-up of electric charge
a flow of electric charge
the push in a simple circuit
a positive charge
Answers
The answer B. a flow of electric charge
Hope this helps !
Answer: a flow of electric charge
Explanation:
Lasers can be used in
in place of a knife.
Answers
Answer: No
Explanation:
Laser can cut many things,
its cutting is so popular largely because of its versatility. Laser cutterscan cut a wide variety of materials – anything from paper, wood, cork, acrylic and foam to different types of metals. Still, there are some materials that would seemingly fit well into this list but should never be cut using a laser cutter.
A sound wave traveling at STP has a period of .0023 seconds. The wavelength of this sound is closest to
1)1.4E5
2)6.9E-6
3)0.76m
4)76m
Answers
Answer: 3
Wavelength = 0.76m
Explanation:
When sound wave is travelling at standard temperature and pressure ( STP), its speed will be equal to normal speed of sound which is equal to 331 m/s
Given that the period of the wave is 0.0023 seconds.
Wave speed = wavelength/period
Substitute the wave speed and the period to obtain wavelength
331 = wavelength/0.0023
Cross multiply
Wavelength = 331 × 0.0023
Wavelength = 0.7613 metre
The wavelength of this sound is closest to 0.76 m
A ____ is another name for a group of elements with similar properties
on the periodic table of elements.
Answers
Explanation- There are 18 numbered groups in the periodic table. The elements in a group have similar physical or chemical characteristics and some groups have a specific name, for example group 17 (the halogens).
Answer:
Family
Explanation:
The groups of elements are called families
Find the velocity of a wave of period 2 s and wavelength 0.5m. *
Answers
Answer:
The velocity of wave is 0.25m/s
Explanation:
First, you have to find the fequency using the formula, F = 1/Time :
[tex]f = \frac{1}{t} [/tex]
Let t = 2s,
[tex]f = \frac{1}{2} [/tex]
[tex]f = 0.5Hz[/tex]
Next, you have to use speed formula, V = f×λ :
Let f = 0.5Hz,
Let λ = 0.5m,
[tex]v = 0.5 \times 0.5[/tex]
[tex]v = 0.25[/tex]
What happens to a falling object when the force of air resistance equals the force of gravity?
A)It shows increasing acceleration.
B)It begins to slow down.
C)It reaches terminal velocity.
D) It shows projectile motion.
Answers
Answer:
Its C.
Explanation:
When the two forces of gravity and force resistance become the same, the object no longer speeds up , and it doesn't slow down either. This is called terminal velocity .
So ,C is the correct answer .
Hope it works out !!
When the force of air resistance equals the force of gravity, the falling object reaches terminal velocity. Hence, option (C) is correct.
What is terminal velocity?The maximum velocity attained by an object as it falls through a fluid is known as terminal velocity. It occurs when the sum of the drag and buoyancy forces acting on the object equals the downward force of gravity. Because the object's net force is zero, it has no acceleration.
An object is moving at its terminal velocity in fluid dynamics if its speed is constant due to the restraining force exerted by the fluid through which it is moving.
As an object's speed increases, so does the drag force acting on it, which is also affected by the substance it is passing through. The drag or force of resistance will equal the gravitational pull on the object at some speed.
Learn more about terminal velocity here:
https://brainly.com/question/2654450
#SPJ2
Which actions are evidence that a chemical reaction has occurred? Select five options. a change in color the formation of a precipitate a clear liquid becoming cloudy a change in shape the formation of bubbles the formation of smoke
Answers
Answer:
Explanation:
Answer:
b
Explanation:
The periodic table is often referred to as the chemists'
______.
Answers
Answer:
calendar
Explanation:
Which of the following scenarios present an object with kinetic energy? Select all that apply.
A. a golf ball rolling across the green toward the cup
B. a flock of birds flying through the sky on their way to their winter living area
C. a book sitting on a shelf in the library
Answers
I think the right option are A and B
Those energy which is possessed by a body due to virtue of its motion is called kinetic energy.
Hope it helps...
Answer:
A. a golf ball rolling across the green toward the cup
B. a flock of birds flying through the sky on their way to their winter living area
Explanation:
Kinetic energy is the energy that an object has because of its motion. This energy can be converted into other kinds, such as gravitational or electric potential energy, which is the energy that an object has because of its position in a gravitational or electric field.
Which type of energy increases when an object's atoms move faster?
A thermal
B chemical
C nuclear
D mechanical
Answers
Answer:
thermal
Explanation:
when an object's atoms move it causes friction, when friction happens, it heats ups causing thermal energy
Answer:
Thermal
Explanation:
you have to use friction to make thermal energy that's why when you rub your hands together it gets hotter and hotter. When you are playing tug of war and you get a rope burn it is because your hand is getting in contact with the rope that is slipping out of your hand
PLS CORRECT ME IF IM WRONG
Four springs are stretched to the same distance from the equilibrium position. The spring constants are listed in the table. A 2 column table with 4 rows. The first column is labeled spring with entries W, X, Y, Z. The second column is labeled spring constant in newtons per meter with entries 24, 35, 22, 15. Which lists the springs based on the amount of elastic potential energy, from greatest to least?
Answers
Answer:
X,W,Y,Z
Explanation:
It is what it is. and i took the edge test
Answer:
or b on edge 2021
Explanation: