If an item with a fixed emissivity of 0.725 radiates heat at a rate of 10 w when it is at an absolute temperature of t, it will now do so at a rate of 160 W if the temperature is doubled to 2t.
Thermal radiation is produced by any item above absolute zero in temperature. However, the amount of thermal radiation emitted for any given wavelength and temperature varies on the surface emissivity of the item.
The ratio of the energy emitted from a material's surface to the energy emitted from a blackbody, a perfect emitter with the same temperature, wavelength, and viewing circumstances, is known as emissivity. It is an arbitrary number without dimensions between 0 (for an ideal reflector) and 1. (for a perfect emitter).
In addition to the material, a surface's emissivity also relies on the kind of surface. As an illustration, a polished and spotless metal surface will have a low emissivity.
Learn more about Emissivity here
https://brainly.com/question/28165902
#SPJ4
of the four main types of organic molecules, the type that consists of mostly carbon and hydrogen and does not dissolve in water are the
There is Covalent bond between Carbon and Hydrogen.
What is Covalent bond?In chemistry, a covalent bond is an interatomic coupling formed when two atoms share an electron pair. The electrical attraction of their nuclei for the identical electrons is what causes the binding.
When the linked atoms' combined energies are lower than those of widely spaced atoms, a covalent connection is created. To learn more, go to chemical bonding: ionic bonding. The inorganic elements hydrogen, nitrogen, chlorine, water, and ammonia (H2, N2, Cl2, H2O, NH3) as well as all organic compounds are examples of molecules with covalent connections.
Covalent bonds are denoted as solid lines joining atom pairs in structural representations of molecules.
Therefore, There is Covalent bond between Carbon and Hydrogen.
To learn more about Covalent bond, refer to the link:
https://brainly.com/question/10777799
#SPJ1
the timer was set for 40 hz in this experiment and it produced a spot on the tape every 25 ms. if you set the timer to 10 hz, what would be the elapsed time between spots?
The required elapsed time between spots when frequency and time for an experiment is specified is calculated to be 100 ms.
We know the relation between frequency and time as,
f = 1/T
where,
f is frequency
T is time period
It is given that f₁ = 40 hz
Time T₁ = 25 ms
If the timer is set to f₂ = 10 hz, time T₂ = ?
From the above relation, the equation can be written as,
f₁ T₁ = f₂ T₂
T₂ = f₁ T₁/f₂ = 40(25)/10 = 100 ms
Thus, the elapsed time between spots is calculated to be 100 ms.
To know more about frequency:
https://brainly.com/question/14235341
#SPJ4
if a system of pulleys contains more than one cord, relate the position of a point on one cord to a point on another cord. how many equations are required? group of answer choices one one per cord twice the number of cords
The number of equations required to relate the position of a point on one cord to a point on another cord in a system of pulleys with more than one cord is equal to twice the number of cords.
In a system of pulleys with more than one cable, the number of equations needed to connect the location of a point on one cord to a point on another chord is equal to twice the number of cords. This is because for each cord, an equation is needed to describe its position as a function of time, and another equation is needed to describe its velocity as a function of time.
In a system of pulleys with more than one cable, the number of equations needed to connect the location of a point on one cord to a point on another chord is equal to twice the number of cords. This is due to the necessity for two equations: one to describe each cord's position as a function of time and another to explain its velocity as a function of time.
Learn more about velocity here
https://brainly.com/question/18084516
#SPJ4
The complete question is
if a system of pulleys contains more than one cord, relate the position of a point on one cord to a point on another cord. how many equations are required? group of answer choices
a. one one per cord
b. twice the number of cords
c. thrice the number of cords
d. none of the above
7. Determine what happens to the wavelength when the
waves change between the following parts of the
electromagnetic spectrum.
Infrared to Radio waves:
Radio waves to Microwaves:
Ultraviolet to gamma rays:
Gamma rays to X-rays:
Infrared to Ultraviolet:
Yellow to blue:
Green to orange:
Infrared to red:
Ultraviolet to violet:
At the point when waves change starting with one medium then onto the next, the frequency of the wave changes relying upon the properties of the two mediums.
What befalls the frequency when the waves change between the accompanying pieces of the electromagnetic range?Infrared to Radio waves: Frequency increments
Radio waves to Microwaves: Frequency diminishes
Bright to Gamma beams: Frequency diminishes
Gamma beams to X-beams: Frequency diminishes
Infrared to Bright: Frequency diminishes
Yellow to blue: Frequency diminishes
Green to orange: Frequency increments
Infrared to red: Frequency increments
Bright to violet: Frequency diminishes
At the point when waves change starting with one medium then onto the next, the frequency might change relying upon the refractive lists of the two media.
Assuming the refractive list of the subsequent medium is more noteworthy than the first, then, at that point, the frequency will diminish. In the event that the refractive record of the subsequent medium is lower than the first, then, at that point, the frequency will increment.
The electromagnetic spectrum is what?The spectrum of all EM radiation is known as the electromagnetic (EM) spectrum. The visible light from your house's lamp and the radio waves from a radio station are both examples of electromagnetic radiation, which is energy that moves and spreads out.
Learn more about electromagnetic spectrum:
brainly.com/question/2261239
#SPJ4
calculate the horizontal distance, xmax , in meters, that the ball has traveled when it returns to ground level.
A ball that leaves a bat and returns to the ground level will reach a maximum horizontal distance of 145.8 meters.
An object moves in projectile motion when it follows a parabolic route. When gravity is the only influencing force after one force launches the object, it happens. Projectile trajectory refers to the path that the object takes when subjected to this gravitational pull. We typically ignore air resistance out of convenience.
The following equation can be used to determine the ball's maximum horizontal distance ([tex]x_{max}[/tex]) before it hits the ground:
[tex]x_{max} =\frac{v_o^2 \times sin(2\theta)}{g}[/tex]
Where:
[tex]v_{o}[/tex] is the starting speed = 38[tex]\frac{m}{s}[/tex]
[tex]\theta[/tex] is the angle 41° higher than the horizontal
g = 9.81 [tex]\frac{m}{s^2}[/tex] is the acceleration caused by gravity.
The maximum horizontal distance is as follows:
[tex]x_{max} =\frac{v_o^2 \times sin(2\theta)}{g}=\frac{38^2 \times sin(2\times 41)}{9.8}[/tex]=145.8m
The horizontal distance, then, is 145.8 meters when the ball lands at ground level.
Learn more about horizontal distance
brainly.com/question/11960089
#SPJ4
water flows through a horizontal plastic pipe with a diameter of 0.2 m at a velocity of 9 cm/s. (a) determine the pressure drop per meter of pipe using the moody chart. (b) calculate the power lost to the friction per meter of pipe. assume that the water is at 20oc.
The pressure is 0.00038 Pa/m, and the power lost to friction per meter of pipe is approximately [tex]2.28 * 10^-7 W/m.[/tex]
To determine the pressure drop per meter of pipe and the power lost to friction, we need to calculate the friction factor using the Moody chart and the Darcy-Weisbach equation. The Darcy-Weisbach equation is:
ΔP = [tex]f * L * (v^2) / (2 * g * d)[/tex]
where ΔP is the pressure drop per meter of pipe, f is the friction factor, L is the length of pipe, v is the velocity of the water, g is acceleration that occurs because of gravity and d is pipe's diameter.
We can use the Moody chart to find the friction factor, f, based on the Reynolds number, which is a measure of the fluid flow regime. For a smooth plastic pipe, the Reynolds number can be calculated as:
Re = (v * d) / ν
where ν is the kinematic viscosity of the water, which is approximately [tex]0.000001 m^2/s[/tex] at 20°C.
Once we have the Reynolds number, we can find the friction factor from the Moody chart. For a Reynolds number of approximately 2200, the friction factor for a smooth plastic pipe is approximately 0.022.
Plugging the values into the Darcy-Weisbach equation, we find that the pressure drop per meter of pipe is:
ΔP = [tex](0.022) * (1 m) * (0.09 m/s)^2 / (2 * 9.8 m/s^2 * 0.2 m)[/tex] = 0.00038 Pa/m
To calculate the power lost to friction, we can use the equation:
P = ΔP * Q
where P is the power lost to friction and Q is the flow rate, which can be calculated as:
Q = A * v = [tex](pi/4) * d^2 * v = (pi/4) * (0.2 m)^2 * (0.09 m/s)[/tex]= [tex]0.0006 m^3/s[/tex]
Plugging the values into the power equation, we find that:
P = ΔP * Q = (0.00038 Pa/m) * (0.0006 [tex]m^3/s[/tex]) = [tex]2.28 * 10^-7 W/m[/tex]
Learn more about Pressure here:
https://brainly.com/question/29713163
#SPJ4
a baseball is thrown straight up at a speed of 30.0 m/s. at what time will the ball be at a height of 25.0 m?
Answer:
t = 0.995 s, 5.127 s
Explanation:
Δx = v₀t + 1/2at²
25.0 m = (30 m/s)t + 1/2(-9.8 m/s²)t²
-4.9t² + 30t - 25 = 0 solve this quadratic equation for t (2 solutions)
t = 0.995 s, 5.127 s
It reaches a height of 25 m in 0.995 s, then again 5.127 s later on its way back down
somewhat idealized graph of the velocity of blood in the ascending aorta during one beat of the heart. approximately how far, in cm, does the blood move during one beat?
According to the graph the blood move 8 cm during one beat.
To find how far does the blood move during one beat, we need to find the area under the velocity curve.
The blood displaces [tex]\triangle x =x_f-x_i[/tex] between t = 0.1 s and t = 0.3 s is the area under the curve from t = 0.1 s to t = 0.3 s.
In this case, the curve is a triangle, thus the area of a triangle is, area of the triangle between t = 0.1 s to t = 0.3 s.
[tex]\dfrac{1}{2} \times 0.2 \times 0.8[/tex] = 8cm
Therefore, blood moves 8 cm during one beat.
To know more about the blood, here
brainly.com/question/17030548
#SPJ4
Explain why sound waves are mechanical waves rather than electromagnetic waves.
Explanation:
Sound is a mechanical wave. Electromagnetic wave is a by-product of both electric and magnetic fields. It does not require the presence of any medium and can travel through a vacuum. In comparison, mechanical waves require the presence of a medium. It works by pushing the medium's molecules and traveling through it. Sound works this way.
I hope it saved your day and don't forget to rate-me down below and smash that brainliest button for whoever deserves it!
Your Best,EdwinA 8 kg Ice skater is moving at 5 m/s and is headed towards a stationary 2 kg snowman. After the two collide, the ice skater has 0 m/s of velocity and the snowman moves forward. What is the velocity of the snowman?
Answer:
[tex]20\; {\rm m\cdot s^{-1}}[/tex], assuming that friction is negligible.
Explanation:
If an object of mass [tex]m[/tex] moves at a velocity of [tex]v[/tex], the momentum [tex]p[/tex] of this object would be [tex]p = m\, v[/tex].
if friction is negligible, the sum of the momentum should be the same before and after the collision.
Before the collision:
Momentum of the ice skater was [tex](8\; {\rm kg})\, (5\; {\rm m\cdot s^{-1}}) = 40\; {\rm kg \cdot m\cdot s^{-1}}[/tex].Momentum of the snowman was [tex](2\; {\rm kg})\, (0\; {\rm m\cdot s^{-1}}) = 0\; {\rm kg\cdot m\cdot s^{-1}}[/tex].In other words, the sum of momentum was [tex]40\; {\rm kg\cdot m\cdot s^{-1}}[/tex] before the collision.
After the collision:
Momentum of the ice skater became [tex](8\; {\rm kg})\, (0\; {\rm m\cdot s^{-1}}) = 0\; {\rm kg \cdot m\cdot s^{-1}}[/tex].Momentum of the snowman needs to be found.The sum of the momentum stays unchanged at [tex]40\; {\rm kg\cdot m\cdot s^{-1}}[/tex]. Subtract the momentum of the ice skater from the sum to find the momentum of the snowman:
[tex]40\; {\rm kg\cdot m\cdot s^{-1}} - 0\; {\rm kg\cdot m\cdot s^{-1}} = 40\; {\rm kg\cdot m\cdot s^{-1}}[/tex].
Divide the momentum of the snowman by its mass to find its velocity:
[tex]\begin{aligned}\frac{40\; {\rm kg\cdot m\cdot s^{-1}}}{2\; {\rm kg}} = 20\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].
In other words, the collision of the snowman would be [tex]20\; {\rm m\cdot s^{-1}}[/tex] after the collision.
3) an electric wagon changes its speed at the average rate of 11.2 m/s2. how much time does it take to increase its speed from 79.4 m/s to 119.5 m/s?
To calculate the time required to increase the speed of an electric wagon from 79.4 m/s to 119.5 m/s at an average rate of 11.2 m/s2, you can use the following equation:
Time = (119.5 - 79.4) / 11.2This gives a result of 4.03 seconds.
When the electric wagon is accelerating, the driver should be mindful of the acceleration rate to ensure that the vehicle is accelerated safely. If an excessive rate of acceleration is used, the vehicle may end up going too fast and this could be dangerous. Therefore, it is important to be aware of the acceleration rate and to keep an eye on the speedometer to ensure that it does not exceed the desired speed.
Learn more about the speed:
https://brainly.com/question/27888149
#SPJ4
as part of an exercise program, a woman walks south at a speed of 2.00 m/s for 60.0 minutes. she then turns around and walks north a distance 3000 m in 30.0 minutes. what is the woman's average velocity during her entire motion?
The woman's average velocity during her entire motion is 0.823m/s.
Distance traveled in the south = 60×60×2= 7200m
Distance traveled in the North = 3000m
Net Displacement = 7200-3000= 4200m
Average velocity= Net Displacement /Time = 4200m / (60+25)×60= 0.823m/s.
The pace is the directional speed of an item in motion as a demonstration of its price of alternate in the role as observed from a specific body of reference and as measured via a particular widespread of time (e.g. 60 km/h northbound). speed is a fundamental concept in kinematics, the branch of classical mechanics that describes the motion of our bodies.
Velocity is a bodily vector amount; each significance and route are needed to define it. The scalar absolute value (significance) of speed is known as velocity, being a coherent derived unit whose quantity is measured inside the SI (metric device) as meters in step with second (m/s or m⋅s−1). as an example, "5 meters in step with 2d" is a scalar, whereas "5 meters consistent with 2nd east" is a vector. If there is a trade-in velocity, route, or each, then the object is stated to be present process an acceleration.
To learn more about Velocity visit here:
brainly.com/question/30559316
#SPJ4
examine the sketch of a bend in a river. the arrows show the water flow direction. in which of the four lettered locations will the water be moving at the highest velocity?
The river speed is maximum at point A. Option A is the correct answer.
The speed of a river on a circular turn is maximum at the outer part of the curve. This is because the water flowing in the river has to travel a greater distance on the outer curve as compared to the inner curve. Therefore, to cover the same distance in the same amount of time, the speed of the water has to be greater on the outer curve.
This is known as the principle of conservation of angular momentum, which states that the angular momentum of the water flowing in the river is conserved as it moves around the curve.
To know more about the speed, here
brainly.com/question/17661499
#SPJ4
--The complete question is, Examine the sketch of a bend in a river. The arrows show the water flow direction. In which of the four lettered locations will the water be moving at the highest velocity?
A) A
B) B
C) C
D) D--
A 500-kg ball at the end of a 30-m cablesuspended from a crane is used to demolish an old building.If the ball has an initial angular displacement of 15°from the vertical , determine its speed at the bottom of the arc.
The velocity at the bottom of the arc with the ball of 500kg at the end of a 30 m cable suspended will be 8.88 m/s.
What is Velocity?Velocity can be defined as the displacement of the object in a particular time period. Velocity is a vector quantity because it has both the magnitude and direction. The SI unit of velocity is m/s.
We have given mass, m = 500 kg
Length of cable, l = 30 m
Angular displacement of the ball, θ = 30°
Gravitational potential energy of the ball at the displaced position is equal to,
U = mgl (1 - cosθ)
Maximum kinetic energy of the ball, Ke = 1/2 mv²
According to energy conservation,
1/2 mv² = mgl (1 - cosθ)
v = √2gl(1 - cosθ)
v = √2 × 9.8 × 30(1-cos30)
v = 8.875 m/s
Therefore, the velocity of the arc is 8.88 m/s.
Learn more about Velocity here:
https://brainly.com/question/18084516
#SPJ1
you have likely noticed that the temperature on the thermometer tends to fluctuate. is this fluctuation realistic? why or why not?
The degree of change in a thermometer's thermometric characteristic for a unit temperature change is known as sensitivity. When something fluctuates, it undergoes rapid, unpredictably changing change.
What does temperature variation mean?Thermal fluctuations are arbitrary departures from the average state of a system that take place in an gravity system, according to statistical mechanics. All thermal fluctuations grow in size and frequency as temperature rises and diminish as temperature falls closer to absolute zero.
What causes temperature changes?That must be "temperature fluctuation," I suppose. Low pressure and high pressure are two separate sorts of pressure, which is why that is the case. Low pressure systems frequently bring inclement weather, which may include wind, rain, snow, or hail. As also, in those.
To know more about gravity visit :
https://brainly.com/question/14874038
#SPJ4
what two stars alternate every 13,000 years as earth’s northern star?
Every 13,000 years, Polaris and Vega switch places as the North Star. Today, Polaris, the brightest star in the constellation Ursa Minor, lies within one degree of the Earth's axis.
What northern star was Earth's before Polaris?Currently, Polaris is practically exactly where the Earth's rotation axis points. However, the North Star in the year 3000 BCE was a star called Thuban (also known as Alpha Draconis), and due to the precession of the rotation axis, the bright star Vega will become the North Star in roughly 13,000 years.
Polaris became the North Star at what point?The North Star around 3000 BC was a slender star called Thuban in the constellation of Draco. The North Star did not replace Polaris.
To know more about Northern Star visit:-
https://brainly.com/question/22595248
#SPJ4
predict which penny will land first, the penny moving horizontally, or the one that simply drops off the table. explain.
It is observed that both the pennies will land at the same time. This is because second penny has only horizontal velocity.
Projectile motion occurs when an object moves through two or more dimensions simultaneously, usually under the influence of gravity. The kinematic equations regulating projectile motion apply independently in each dimension, which is a crucial aspect of the motion.
Both pennies will land at the same time. The second penny's velocity is fully horizontal, therefore its vertical velocity is still zero, and this is the explanation for it. As a result, it will have the exact same kinematic equation in the y-dimension as the first penny and will fall to the ground at the same moment. The time till impact will not alter regardless of the second penny's horizontal speed.
The question is incomplete. The complete question is 'If one penny is balanced on the edge of the table and you place your index finger on a second penny then flick the second penny so that it ravels off the table, while the first penny is gently nudged off the edge, which penny will land first, the penny moving horizontally or the one that simply drops off the table. Please explain the answer.'
To know more about penny:
https://brainly.com/question/28744480
#SPJ4
A ball is thrown from a roof top at an angle of 45° above the horizontal. It hits the ground a few seconds later. At what point during its motion, does the ball have (a) greatest speed. (b) smallest speed. (c) greatest acceleration? Explain
Answer:
Explanation:
WHEN WE PROJECT A BALL FROM THE ROOFTOP, THE BALL travels down and the ball have greatest speed at the moment strike on the earth. ball have smallest speed at the moment of release.. the acceleration is constant.
Please click me the Brainlist.
a ping-pong ball of mass m rolls off the edge of a table that is 1.0 m high. when the ball strikes the floor its speed is5.0 m/s. how fast was it rolling when it left the table.
The ball was rolling at a speed of 4.44 m/s when it left the table.
What is speed?
Speed is a scalar quantity that describes the magnitude of an object's velocity, or the rate at which an object is moving. It is defined as the distance traveled by an object divided by the time it takes to travel that distance. The unit of speed is usually meters per second (m/s) or kilometers per hour (km/h).
We can use the conservation of energy principle to solve this problem. The initial potential energy of the ball when it was at the edge of the table is equal to its weight multiplied by its height above the floor:
PEi = mgh
PEi = m * 9.8 m/s² * 1.0 m = 9.8 N * m
At the moment the ball strikes the floor, all of its potential energy has been converted into kinetic energy:
KEf = 1/2 * m * v²
where v is the velocity of the ball just before it strikes the floor. We can equate the initial potential energy to the final kinetic energy and solve for the velocity of the ball when it left the table:
PEi = KEf
9.8 N * m = 1/2 * m * v²
v²= 2 * PEi / m = 2 * 9.8 N * m / m = 19.6 m²/s²
v = √(v²) = √(19.6 m²/s²) = 4.44 m/s
So, the ball was rolling at a speed of 4.44 m/s when it left the table.
To learn more about speed:
https://brainly.com/question/26046491
#SPJ4
103) if the collision is elastic and the final speed of object b is 5.0 m/s, what is the final velocity of object a?
The final velocity of object A is equal to the final velocity of object B, which is 5.0 m/s.
If the collision between objects A and B is elastic, then both momentum and kinetic energy are conserved.
Let the initial velocity of object A be [tex]v_A[/tex] and the initial velocity of object B be [tex]v_B[/tex]. The mass of object A is and the mass of object B is [tex]m_B[/tex].
Conservation of momentum:
[tex]m_A v_A + m_B v_B = m_A v' + m_B v'[/tex]
where v' is the final velocity of both objects.
Conservation of kinetic energy:
[tex]\dfrac{1}{2} m_A v_A^2 + \dfrac{1}{2} m_B v_B^2 = \dfrac{1}{2} m_A v'^2 + \dfrac{1}{2} m_B v'^2[/tex]
Substituting v' in terms of [tex]v_A[/tex] and [tex]v_B[/tex] using the momentum conservation equation,
[tex]v_A = \dfrac{m_A - m_B}{m_A + m_B}v_B + \dfrac{2m_B}{m_A + m_B}v_B[/tex]
[tex]v_A = \dfrac{(m_A - m_B + 2m_B)v_B}{m_A + m_B}[/tex]
[tex]v_A = \dfrac{(m_A + m_B)v_B}{m_A + m_B}\\= v_B[/tex]
Therefore, the final velocity of object A is equal to the final velocity of object B.
To know more about the velocity, here
brainly.com/question/13639113
#SPJ4
a projectile is fired in such a way that its horizontal range is equal to 8.5 times its maximum height. what is the angle of projection?
The angle of projection is 25.2°. The result is obtained by using the formula for maximum height and horizontal range of projectile motion.
What is maximum height and horizontal range of projectile motion?The maximum height can be reached by a projectile motion is
H = (v₀²sin²θ)/2g
Where
H = maximum heightv₀ = initial velocityθ = angle of projectiong = acceleration due to gravityMeanwhile, the horizontal range can be reached is
R = (v₀² sin 2θ)/g
A projectile is fired. The horizontal range is equal to 8.5 times the maximum height. Find the angle of projection!
In this case, we get
R = 8.5 H
(v₀² sin 2θ)/g = 8.5 × (v₀²sin²θ)/2g
2(sin 2θ) = 8.5 × (sin²θ)
2(sin 2θ) = 8.5(sin²θ)
2/8.5 = (sin²θ)/(sin 2θ)
0.235 = (tan θ)/2
tan θ = 0.47
θ = arc tan 0.47
θ = 25.2°
Hence, the projectile motion has the angle of 25.2°.
Learn more about projectile motion here:
brainly.com/question/30299335
#SPJ4
what would happen to the motion of the projectile if we do not ignore air resistance? group of answer choices it is impossible to think about what would happen to the object. the object would move in a straight line. the range would be a shorter distance. purple the object would not fall to the ground.
Projectile motion exhibits negligible horizontal acceleration if air resistance is disregarded. As a result, the particle moves horizontally at a constant speed.
A projectile is an item on which gravity is the only force at work. Projectiles come in a variety of forms. A fallen object is referred to as a projectile motion (provided that the influence of air resistance is negligible).A projectile is something that is thrown vertically upward (provided that the influence of air resistance is negligible). In addition, any object sent upward at an angle to the horizontal is considered a projectile (provided that the influence of air resistance is negligible). Any object that, after being launched or dropped, keeps moving due to its own inertia and is solely impacted by the gravitational force acting downward is considered a projectile.
Learn more about Projectile motion
brainly.com/question/11049671
#SPJ4
a rock undergoing free fall on planet x is thrown upward at 5.0 m/s. it undergoes constant acceleration vertically downward, and when it lands it is traveling downward at 15.0 m/s. if the rock lands 20.0 m below where it was thrown upward, how long does it spend in the air?
The rock which undergoing free fall spends approximately 1.02 seconds more in the air if the rock lands 20.0 m below where it was thrown upward.
The rock undergoing free fall on planet x is thrown upward at 5.0 m/s and it undergoes constant acceleration vertically downward. When the rock landing the velocity was 15.0 m/s.
The time spent in the air by the rock can be calculated using
v = u + at
where v is the final velocity 15 m/s downward, u is the initial velocity 5 m/s upwards, a is the acceleration which is constant here and equal to acceleration due to gravity ⇒ 9.8 m/s² and finally t is the time in the air.
v = u + at ⇒ v - u = at
15.0 m/s - 5.0 m/s = g × t
10.0 m/s = g × t
t = 10.0 m/s / g ⇒ t = 10.0 m/s / 9.8 m/s² = 1.02 s
Learn more about free fall:
https://brainly.com/question/13299152
#SPJ4
URGENT
In a dry desert environment, the climate will typically show wide temperature swings on a daily basis, from very cold to very hot. Florida typically has much smaller temperature swings. What causes that difference?
Group of answer choices
The lower altitude of Florida
The water surrounding Florida
Increased sunshine in Florida
The shorter daylight period in the desert
Florida typically has a much smaller temperature swing than a dry desert environment, where the climate will typically show wide temperature swings on a daily basis, from very cold to very hot because of the water surrounding Florida.
The correct option is B.
What are the waters surrounding Florida?The State of Florida is a peninsula, which means it is surrounded on three sides by water: the Gulf of Mexico, the Atlantic Ocean, and the Straits of Florida.
Hence, because of the waters surrounding Florida, it has fewer temperature swings.
Learn more about Florida: https://brainly.com/question/2685941
#SPJ1
An iron rail is 20cm² in area. how much will it expand when heated from 100∅ to 50∅
Answer:
0.024
Explanation:
no expansivity ok but I can do it
linear expansivity=1.2*10^-5
=2a
=2*1.2*20^-5
=2.4*10^-5
∆A =?
A1 =20
2.4*10^-5 =∆A/A1(100-50)
∆A =2.4*10^-5*1000
=0.024
What are the byproducts of nuclear energy and what are the options for disposing of the waste?
Nuclear energy production generates several byproducts, including spent nuclear fuel and high-level radioactive waste. These byproducts pose a significant challenge for safe disposal and management.
There are several options for disposing of nuclear waste, including:
Deep geological disposal: This involves burying the waste in deep geological formations, such as salt mines or clay deposits, where it will be isolated from the biosphere for a very long time.
Reprocessing: This involves separating reusable materials from spent nuclear fuel, with the remaining waste being further processed and prepared for disposal.
Interim storage: This involves temporarily storing waste in secure facilities until a permanent disposal solution can be found.
Ocean dumping: This involves disposing of waste in the deep ocean, which is currently banned under international agreements.
The most widely accepted method of disposing of high-level radioactive waste is deep geological disposal. However, the implementation of this method requires significant investment, public acceptance, and technical expertise, and is currently only being carried out in a few countries. As the amount of nuclear waste continues to grow, it is important for countries to develop safe and sustainable disposal solutions to protect human health and the environment.
Learn more about Nuclear energy here
https://brainly.com/question/2240073
#SPJ4
in 2.0 minutes, a ski lift raises 5 skiers at constant speed to a height of 115 m. the average mass of each skier is 65 kg. what is the average power provided by the tension in the cable pulling the lift?
Average power provided by the tension in cable when 5 skiers where uplift is 176.04watt.
We can characterize power as the speed of taking care of business, it is the work done in unit time. The SI unit of force is Watt (W) which is joules each second (J/s). Once in a while the force of engine vehicles and different machines is given concerning Strength (hp), which is roughly equivalent to 745.7 watts.We can characterize normal power as the complete energy consumed separated by the all out time taken. In basic language, we can say that typical power is the typical measure of work done or energy changed over per unit of time.
We know that power is the ratio of the work done to the respective time taken
here,work done is the potential energy at height of 115m which is equla to mgh.
Now,weight of 5 skiers is =65×5kg=325kg.
Now,potential energy of 5 skiers is 325×65=21125Joules.
Total time taken =2min=2×60=120sec.
Therefore,power provided by the tension in cable is 21125/120=176.04Watt.
Hence,power provided by the tension in cable is 176.04watt.
To know more about power,visit here:
https://brainly.com/question/13107781
#SPJ4
A rope that makes a 15° angle with the
horizontal pulls a block weighing 3 Na
distance of 10 meters to the right at a
constant velocity. The tension in the rope
is a 2 N force. How much work is done
by the rope acting on the block in the
horizontal directi on? Let F, be the
tension in the rope and Ax be the
3. displacement in the x-direction.
A. 28.98 J
B. 20 J
C. 189.34 J
D. 19.32 J
Answer:
Explanation:
d
200g of water at 90 degree celsius is mixed with 100g of water at 30 degree celsius. What is the temperature
Answer:
For temperatures between the freezing and boiling point of water, the heating curve is linear. Thus, we can use:
((200 * 90) + (100* 30))/300
Or: ((200 * 90)(temperature of first sample weighted by mass) + (100 * 30)(temperature of second sample weighted by mass) / (300)(total mass)
to find the final temperature.
100 can be factored out to get (2 * 90) + (1 * 30)) / 3
3 can be factored out every term: (2 * 30) + (1 * 10)
(The factoring out just makes mental math easier; if a calculator is available doing so is unnecessary.)
And then just work through the order of operations.
60 + 10
=70.
So in mathematics, which assumes a perfect world, you get 70.
consider two identical spherical balls submerged in water at different depths. will the buoyant forces acting on the two balls be the same or different? why?
The buoyant forces acting on the two balls will be the sam. This is because buoyant force is determined by the volume of the object and not the depth at which it is submerged.
The buoyant force is the same for any object of the same volume regardless of the depth.
The buoyant force is an upward force exerted on a submerged object by the surrounding liquid. The magnitude of this force is equal to the weight of the liquid displaced by the object. This force is commonly used to explain why objects float in water.
Learn more about buoyancy forces :
https://brainly.com/question/12788506
#SPJ4