a metal having a cubic structure has a density of 19.302 g/cm 3 an atomic weight of 196.97 g/mol and a lattice paramater of 4,0786 a one atom is associated with each lattice point determine the crystal structure of the metal

If the item were orbiting at a distance of 5,000 km, there would be a gravitational force of 40 N.

Gravitational force is the name for the force that the earth exerts on a body. Among other instances of motion caused by gravitational force are the leaves and fruits that fall from trees and land on the ground, the water that flows down rivers, and a ball that is tossed up that travels to a height before landing back on the ground.

A substance's gravitational pull is:

F = GMm / r²

Where G is the gravitational constant over all space and time,

A single object's mass is M. (the planet),

The weight of the opposing item is m.

r is the separation between the items.

F is equal to 10 N at 10,000 km.

(10 N) = GMm / (10,000 km) (10,000 km)

²

GMm=109 N km2

Whenever r is 5,000 km:

F = (10⁹ N km²) / (5000 km) (5000 km)

F = 40 N.

To learn more about gravitational force refer to:

https://brainly.com/question/27943482

#SPJ1

When two objects are suspended from wires, All of the above can result in such an attraction. The correct answer D.

When two objects are suspended from threads, the movement of one object close to the other can cause the electrons in the atoms of one object to be transferred to the other, resulting in one object gaining a positive charge and the other gaining a negative charge.

This causes the two objects to attract each other due to the opposite charges.

This phenomenon is known as electrostatic attraction, and it occurs due to the electrostatic force of attraction between charged objects. The strength of this force depends on the distance between the objects and the magnitude of their charges. When the objects are brought closer together, the force of attraction becomes stronger, and they may even stick together.

Learn more about objects in suspension:

https://brainly.com/question/30470629

#SPJ4

A. "Both Bob and Alice must have thrown the balls with the same speed" and D. "Both balls must have reached the same maximum height" are true statements.

When two objects are thrown vertically upwards with the same starting height and take the same amount of time to reach their maximum height, it can be concluded that both objects were thrown with the same speed, as their time of flight is dependent on their initial velocity. Additionally, since they started from the same height, their maximum height must also be the same.

You can learn more about speed at

https://brainly.com/question/27888149

#SPJ4

the answer it letter b for your question

The structure of the statement is cause and effect.

option A is the correct answer.

The structure of the statement is "cause and effect" because it describes a situation where one thing (polluted water) is the result of another (lack of stricter laws about dumping into the river).

The statement suggests that the cause (lack of stricter laws) will continue to result in the same effect (polluted water) unless some action is taken to change the cause. In this way, the statement explains the relationship between the two events or situations and how one leads to the other.

Learn more about cause and effect here: https://brainly.com/question/25680753

#SPJ1

Answer:

Hi good morning sir I am not

If the stone hits the water in the well after falling for 1.7s then the depth of the well is about 14.16m.

The time required by the stone to fall and reach the bottom of the well is 1.7s.

Now, we know from the equation of motion,

H = ut + 1/2at²

Where,

H is the depth of the well,

u is the initial speed of the well that is zero in our case,

t is the time taken by the stone to hits the water.

Now, putting all the values,

H = 0.5 x 9.8 x 1.7 x 1.7

H = 14.16 m.

The depth of the well is 14.16m.

To know more about equation of motion, visit,

https://brainly.com/question/25951773#:~:text=Expert%2DVerified%20Answer&text=Motion%3A%20This%20can%20be%20defined,.....%20Equation%201

#SPJ4

The acceleration of a 2,500-kg single-engine airplane just before takeoff when the thrust of its engine is 500N is, 0.2 m/s²

Acceleration is a vector quantity that describes the rate at which an object changes its velocity. It is the rate at which the velocity of an object changes in magnitude or direction, or both. In other words, it tells us how quickly an object is speeding up or slowing down. Acceleration has units of meter per second squared (m/s²) and its direction is the same as the direction of the change in velocity.

The net force acting on the airplane just before takeoff is equal to the thrust of the engine,

which is 500 N, minus the force of drag.

Since the airplane is just about to take off, the force of drag is relatively small,

So we can assume that the net force is equal to the thrust of the engine.

F = m x a

Where F is the net force, m is the mass, and a is the acceleration.

Substituting the values for F and m, we get:

500 N = 2,500 kg x a

Dividing both sides by 2,500 kg, we get:

a = 500 N / 2,500 kg = 0.2 m/s²

So, the acceleration of the 2,500-kg single-engine airplane just before takeoff when the thrust of its engine is 500 N is 0.2 m/s².

To know more about acceleration check:

https://brainly.com/question/12550364

#SPJ1

The angular acceleration of its tires is 26.23 rad/s².

The number of revolutions is by the tire is 24.57 rev.

The time it takes the car to stop is 48.2 s.

The distance of the car will be calculated in d = v0 × t + (1/2) × a × t²

And the car's initial speed in v0.

a) The formula for angular acceleration (α) can be calculated as α = r/a, where r is the radius of the tire and a is the linear acceleration. So, in this case, α = 0.26 / 7.6 = 26.23 rad/s².

b) The formula for angular velocity (ω) at a given time can be calculated as ω = ω0 + αt or ω² = ω²0 + 2αΔΘ , where ω0 is the initial angular velocity and t is the time. To find the number of revolutions, find the time it takes for the angular velocity to reach 0. The equation would be 0 = 95 + 1.97t.  ω²= 2 x 26.23ΔΘ. = 9025 =  58.46ΔΘ

ΔΘ = 9025 / 58.46 = 154.375 rad. n = ωt / (2π). = 154.375/2π = 24.57 rev.

c) We can find the time it takes for the tires to come to rest by solving for t in the equation 0 = 95 + 1.97t. So, t = 95 / 1.97 = 48.2 s.

d) The distance traveled by the car can be calculated as d = v0 × t + (1/2) × a × t^2, where v0 is the initial speed and a is the linear acceleration. However, as the initial speed is not given, the distance cannot be determined.

e) The initial speed (v0) cannot be determined as it is not given in the problem.

Learn more on angular acceleration here: https://brainly.com/question/25129606

#SPJ1

The point t = 0 to t = 8 depict the acceleration of the object.

Acceleration is a measure of the change in velocity of an object over time. It is a vector quantity that describes the rate at which an object changes its speed or direction of motion. Acceleration is calculated as the rate of change of velocity, and is expressed in units of meters per second squared (m/s²).

We can see from the graph that between t = 0 and t =8 was the time that the object underwent acceleration.

Learn more about acceleration:https://brainly.com/question/12550364

#SPJ1

Answer:

D

Explanation:

Stationary electric charges produce electric field, it's expression is given by Coulomb's Law. Moving electric charges produce electric field, it's expression is given by a more complicated form than the Columb's Law. Stationary electric charges DOES NOT produce magnetic field.

The statement regarding the electric forces on the objects is true: f: ab 5 2f: ba.

As the space between two charged items grows, so do the electric forces between them. With more charge on the objects, there are greater electric forces between the charged things. Each object's charge has a direct impact on electrostatic force. Therefore, if the charge of one object is doubled, the force will increase by two times.

There is either a push or a pull. The effects of forces include moving an object, altering its speed, altering its shape, or changing the volume of a body.

To know more about electric forces visit:-

https://brainly.com/question/2526815

#SPJ4

When the distance between earth and sun becomes  double,  the force between them reduces to 1/4th.

Gravity is a fundamental interaction in physics that causes all objects with mass or energy to attract one another. The weakest of the four fundamental interactions is gravity, by a wide margin.

At the macroscopic level, gravity is the most important interaction between things and governs the motion of planets, stars, galaxies, and even light.

When the distance between earth and sun becomes  double,  the force between them reduces to 1/4th.

Learn more about gravity here:

https://brainly.com/question/4014727

#SPJ1

According to the values of all the resistors in the circuit and their connections, a circuit's overall resistance can be calculated (in series, in parallel, or a combination of both).

In a series circuit, the sum of each component resistance determines the circuit's overall resistance. The current in a series circuit is the same size everywhere it is present because there is only one channel for electrons to follow.

The total resistance for resistors connected in parallel is equal to the reciprocals of each resistor added together.

To know more about resistors visit:-

https://brainly.com/question/864799

#SPJ1

To calculate the acceleration of an object moving in a straight line, divide the change in velocity by the time during which the acceleration occurs.

The rate at which velocity changes is called acceleration. Acceleration typically indicates a change in speed, but not necessarily. An item that follows a circular course while maintaining a constant speed is still moving forward because the direction of its motion is shifting.

To calculate acceleration, you need to divide the change in velocity (delta v) by the change in time (delta t) during which the acceleration occurs. The formula for acceleration is a = Δ v / Δ t.

Find out more on acceleration at https://brainly.com/question/460763

#SPJ1

Charging less for phone services in one location to drive out a competitor is  considered to be price discrimination.

A selling tactic known as price discrimination involves charging clients various rates for the same good or service depending on what the vendor believes they can persuade the customer to accept.

When a merchant uses pure price discrimination, they charge each consumer the highest price they will agree to.

In more prevalent types of price discrimination, the supplier divides clients into groups based on particular characteristics and assesses a different price to each group.

Learn more about price discrimination here:

https://brainly.com/question/14969650

#SPJ1

Answer:

Explanation:

The pressure is calculated by dividing the force by the area:

P = F / A = 160 N / 24 cm² = 6.67 N/cm²

The uncertainty in the calculation of pressure can be determined by propagating the uncertainties in the force and area measurements. According to the formula for uncertainty propagation, the fractional uncertainty in the pressure calculation is:

ΔP / P = √((ΔF / F)^2 + (ΔA / A)^2)

Plugging in the values:

ΔP / P = √((6 N / 160 N)^2 + (3 cm² / 24 cm²)^2)

ΔP / P = √(0.0375) = 0.195

So the fractional uncertainty in the pressure calculation is 0.195 or 19.5%.

To find the absolute uncertainty in the pressure, multiply the fractional uncertainty by the pressure:

ΔP = P * ΔP / P = 6.67 N/cm² * 0.195 = 1.29 N/cm²

So, the pressure is 6.67 ± 1.29 N/cm².

The air speed of an airplane traveling 80 meters east and 20 meters south in a second relative to the ground is about 82.46 m/s

The air speed of a flying airplane relative to (a specified location on) the ground is the difference between the airplane's ground speed and the speed of the wind, found using vectors as follows;

Mathematically, we get;

Whereby the velocity of the wind is 120 m/s and the airplane is traveling with an airspeed of 300 m/s due east for example, and the airplane travels 80 meters east and 20 meters south relative to the ground in one second, we get;

Resultant valocity = 80 m/s East, 20 m/s South

v = 80·i - 20·j

The magnitude of the velocity of the plane relative to the ground can be found, using the formula for the magnitude of  resultant vector as follows;

|v| = √(80² + (-20)²) = 20·√(17) ≈ 82.46

The air speed of the plane relative to the ground is therefore;

|v| ≈ 82.46 m/s

Learn more on the air speed of a plane here: https://brainly.com/question/29283438

#SPJ1

The temperature distribution t(x) across a wall with steady heat flux conducted through it, t(x) = -Q/(2k) x² + (T2 - T1 + QL/2k)/L x + T1 - QL²/(4k).

To obtain the temperature distribution t(x) across a wall with steady heat flux conducted through it, we need to solve the one-dimensional heat conduction equation,

d²t(x)/dx² = -Q/k

Where t(x) is the temperature at position x, Q is the steady heat flux conducted through the wall, and k is the thermal conductivity of the wall material.

t(x) = -Q/(2k) x² + Ax + B

Boundary conditions,

t(0) = T1 and t(L) = T2

Where T1 and T2 are the temperatures at the two ends of the wall, and L is the length of the wall.

Using these boundary conditions,

A = (T2 - T1 + QL/2k)/L

B = T1 - QL²/(4k)

Substituting these values of A and B in the equation for t(x),

t(x) = -Q/(2k) x² + (T2 - T1 + QL/2k)/L x + T1 - QL²/(4k)

To know more about the thermal conductivity, here

brainly.com/question/7643131

#SPJ4

Answer:

see below

Explanation:

To measure the current in a circuit we need an ammeter. it is connected in series in the circuit.

To measure potential difference across the lamp you will need a voltmeter. A voltmeter is connected in parallel in circuit.

To measure emf you would again need a voltmeter.

So we need one ammeter and 2 voltmeter .

Additional information:-

An ammeter and a voltmeter both are made from galvanometer . To measure current a device should have minimum resistance, so for this a low resistance called shunt is connected in parallel with the galvanometer to make it a ammeter. Since in parallel combination of resistors,

[tex]\implies R_{net} < R_1 / R_2 / R_3 / .. \\[/tex]

To measure potential difference, there should be least current flowing through the device, so we add a high resistance in series with galvanometer to make it voltmeter.

and we are done!

The student will need 1  ammeter and 2 voltmeters.

Option A is correct.

An ammeter is described as an instrument used to measure the current in a circuit.

An ammeter and a voltmeter both are made from galvanometer . In order to  measure current, a device should have minimum resistance, so for this a low resistance called shunt is connected in parallel with the galvanometer to make it an ammeter.

Below are some of the types of ammeter:

1-Moving coil Ammeter.

2-Moving magnet Ammeter.

3-Electrodynamic Ammeter.

4-Moving iron Ammeter.

5-Hot wire Ammeter.

6-Digital Ammeter.

7-Integrating Ammeter.

Learn more about an ammeter at: https://brainly.com/question/18634425

#SPJ1

Answer:

Explanation:

Centripetal acceleration is the acceleration that points towards the center of a circular path and is responsible for keeping an object moving in a circular path. The equation for centripetal acceleration is:

a_centripetal = v^2 / r

where v is the speed of the object and r is the radius of the circular path.

Centripetal force is the force that acts on an object moving in a circular path and is directed towards the center of the circular path. It is equal to the product of the mass of the object and its centripetal acceleration. The equation for centripetal force is:

F_centripetal = m * a_centripetal

where m is the mass of the object.

A system is a simple compressible system in the absence of electrical, motion, gravitational, magnetic and surface tension effects.

In thermodynamics, the term "state postulate" describes a set of properties that apply to a system that has achieved thermodynamic equilibrium, also It's a known as "the state principle". The state postulate stipulates that only a limited set of attributes need to be given in order to provide an exhaustive account of a state of thermodynamic equilibrium. After the state postulate has been established, the other undefined attributes are required to take on certain values.

State postulate claims "The state of a simple compressible system is completely specified by two independent, intensive properties". A system is said to as a simple compressible system in the absence of electrical, magnetic, gravitational, motion, and surface tension effects. These effects are caused by external force fields and are insignificant for the majority of engineering problems.

To learn more about simple compressible system, click here:

https://brainly.com/question/14654007

#SPJ4

Answer:

"a tile company collects and recycles old tiles from large facilities and makes m"

Explanation:

While the first two sound sustainable, and they are, they're not necessarily part of creating new products. The third option where "a tile company collects and recycles old tiles from large facilities and makes m" which is cut off although I'm assuming "makes more?" making it part of the process of creating new products, although it's more sustainable as it uses old products.

You must promptly inform the nearby NTSB office that the elevator control cable has broken, per NTSB 830.

The operator is required to submit a report using NTSB Form 6120.1 or 6120.2, which can be obtained from NTSB Field Offices or the NTSB in Washington, D.C. 20594: ten days following an accident.

Any incident involving the operation of an aircraft that occurs between the time a passenger boards with the intention of taking off and the time they have all disembarked and in which a person is killed or seriously injured is referred to as an aircraft accident.

To know more about elevator visit:-

https://brainly.com/question/14936445

#SPJ4

The instantaneous velocity of an object may be equal to its standard velocity if it has uniform velocity.

The definition of instantaneous velocity is the rate of change of position over a relatively brief time period (almost zero). m/s, the SI unit of measurement. The size of the immediate velocity is known as the instantaneous speed. Although it lacks a direction, it has the same value as instantaneous velocity.

Simply said, the speed of an object at that precise moment. The definition of instantaneous velocity is "The velocity of an item in motion at a certain point in time."

Learn more about velocity here:

https://brainly.com/question/18084516

#SPJ1

Answer:183

Explanation:when you have taken 120g and 22m/s in 0.63 the acceleration has the speed of 183

Answer:

D. 1/16 reduction in flow

Explanation:

Poiseuille's law says that the flow rate in a tube or pipe is:

[tex]Q=\frac{\pi P r^4}{8 \eta L}[/tex]

where P is the pressure difference, r is the radius, η is the viscosity, and L is the length.

Assuming that P, η, and L are constant, then we can say Q is proportional to r⁴.

Q ∝ r⁴

A 50% narrowing means the new radius is r/2. Thus the new flow is:

Q₀ / r⁴ = Q / (r/2)⁴

Q₀ / r⁴ = 16 Q / r⁴

Q = Q₀ / 16

There is a 1/16 reduction in flow.

The underlined phrase "The speed of the system at height H is zero", "Since it is moving in circular motion and centripetal acceleration is given by ac = v², the acceleration must also be zero" are both underlined phrases are not correct about student 1's statement.

The underlined phrase "The speed of the system at height H is zero" is ​not correct​ about student 1's statement. The statement is incorrect because at the instant it reaches height H, the system would have lost some of its initial kinetic energy due to gravity and would be moving with some velocity, though it could be very small.

The underlined phrase "Since it is moving in circular motion and centripetal acceleration is given by ac = v², the acceleration must also be zero" is also ​not correct​ about student 1's statement. The statement is incorrect because the centripetal acceleration is not given by ac = v², but rather ac = v2/r, where r is the radius of the circular path.

To know more about the centripetal acceleration, here

brainly.com/question/14465119

#SPJ4

The cloud has a positive charge. This positive charge entices a negative charge in the Earth. So the part of Earth that is close to the cloud has a negative charge and the distant part has a positive charge.

A person on earth has electric charges, like the Earth. On the end, before lightning strike cloud and earth have the utmost charge that they can carry. So in this time, the person has a large stake of charge like when he or she skims a Van De Graaff. The hair is placed on end when strands have the exact charge because of the repulsive electric force between them. Likewise, before the lightning strike, the person's hair might be placed on end.

Therefore, before a lightning strike person has a great stake of charge like when he or she adjoins a Van De Graaff.

To learn more about clouds and charges visit here

https://brainly.com/question/4146334

#SPJ4

A diagram showing electric charge distribution on Earth due to the cloud's electric charge.