To solve this problem we will use the concepts related to angular motion equations. Therefore we will have that the angular acceleration will be equivalent to the change in the angular velocity per unit of time.
What is an angular acceleration?Angular acceleration is the rate of change of angular velocity over time. It is a vector quantity, with both magnitude and direction, and is usually measured in radians per second squared (rad/[tex]s^{2}[/tex]).
We will use the relationship between linear velocity, radius, and angular velocity to find said angular velocity and use it in the mathematical expression of angular acceleration.
The average angular acceleration
a = wf-wi/t
Here
a = Angular acceleration
Wf, Wi Initial, and final angular velocity
There is no initial angular velocity, then
a = Wf/t
We know that the relation between the tangential velocity with the angular velocity is given by,
v = rw
Here,
r = Radius
w = Angular velocity,
Rearranging to find the angular velocity
w = v/r
Remember that the radius is half the diameter.
Now replacing this expression in the first equation we have,
a= 30/ 0.20×6
a= 25 rad/s²
Therefore the average angular acceleration of each wheel is 25 rad/s²
What is velocity?It is also possible to refer to velocity as the instantaneous velocity to stress how it differs from the average velocity.Velocity is defined as the rate of change of location with respect to time.To know more about velocity, click the link given below:
brainly.com/question/17127206
#SPJ4
The doppler effect applies to light waves as well as sound waves. Astronomers use this to measure the motion of stars and galaxies. In 1929, edwin hubble discovered that light from distant galaxies was shifted away from the blue end of the spectrum and toward the red end of the spectrum. Red light or red shifted was shifted away from the blue end of the spectrum and towards the red end of the spectrum. Red light has a longer wavelength and lower frequency than blue light. What could hubble conclude about these galaxies?.
Hubble's observation of redshift in the light from distant galaxies led him to conclude that the galaxies were moving away from us.
How is doppler's effect applied ?His discovery gave compelling proof that the universe is expanding since it suggested that the galaxies are all veering away from one another. A method for examining the large-scale structure and history of the universe is also made possible by the degree of redshift, which can be used to estimate the galaxy's distance from Earth and motion speed.To know more about doppler's effect , check out :
https://brainly.com/question/28106478
#SPJ4
An object floats in water. The object is broken into 5 pieces and one of those pieces is placed into the water. What will the object do?
Answer:
if the object can sink it will sink but if the object can float it will float
Copernicus said that t he rotation of the Earth on its axis caused the A. daily motions in the heavens. B. phases of the Moon. C. retrograde motion of the planets D. eclipses of the Moon. E. motion of the Sun along the ecliptic
Copernicus said that t he rotation of the Earth on its axis caused the daily motions in the heavens.
Copernicus proposed the heliocentric model of the solar system, which was a significant shift from the previously accepted geocentric model. He suggested that the sun was at the center of the solar system, and the planets, including Earth, revolved around it.
Copernicus also recognized that the Earth rotated on its axis, which explained the apparent daily motion of the stars in the sky. This was a fundamental insight that contributed to our understanding of the universe and paved the way for further discoveries in astronomy.
To know more about the solar system, here
brainly.com/question/12075871
#SPJ4
calculate the height of the mercury in the tube above the surface in the trough. (Take air pressure = 1.0*1.0^5 pa & density of mercury = 136000 kg/m^3)
Answer:
Explanation:
To calculate the height of the mercury in the tube above the surface in the trough, we can use the following formula:
h = (P - P<sub>0</sub>) / ρg
where h is the height of the mercury column, P is the pressure at the bottom of the tube, P<sub>0</sub> is the atmospheric pressure, ρ is the density of the mercury, and g is the acceleration due to gravity.
Since the pressure at the bottom of the tube is due to the weight of the mercury column above it, we can also express P as P = ρgh, where h is the height of the mercury column in the tube.
Substituting this expression for P into the formula above, we get:
h = (ρgh - P<sub>0</sub>) / ρg
Simplifying this expression, we get:
h = h - P<sub>0</sub> / g
Solving for h, we get:
h = P<sub>0</sub> / ρg
Substituting the given values, we get:
h = (1.0 x 10<sup>5</sup> Pa) / (136000 kg/m<sup>3</sup> x 9.81 m/s<sup>2</sup>)
h = 0.073 m
Therefore, the height of the mercury in the tube above the surface in the trough is approximately 0.073 meters.
Proton A couples to Proton B. Proton A posseses a J-value of 3.0 Hz. What do you expect the J-value Proton B posseses to be? A. 3.0 Hz B. Greater than 3.0 Hz C. Less than 3.0 Hz D. No J-value because coupling is only one-way
In proton coupling, the J-value of a coupled proton is always less than that of the 'parent' proton. Therefore, since Proton A has a J-value of 3.0 Hz, Proton B will have a J-value less than 3.0 Hz.
What is Proton Coupling?Proton coupling is a type of nuclear magnetic resonance (NMR) technique used to determine the structure of molecules. It involves the use of radio frequency pulses to excite and measure the magnetization of protons in a sample. The technique is used to measure the distances between protons, as well as the tumbling motion of molecules, which can be used to assign chemical shifts and atom connectivity. Proton coupling can also be used to measure the concentration of protons in a sample, which can provide insight into the structure and properties of the molecules.
When two protons are coupled together, the J-value of the coupled proton is always less than that of the parent proton. This is because the total energy of the system is conserved, and the energy of the coupled proton is reduced as it shares its energy with the parent proton. This reduced energy is reflected in the lower J-value of the coupled proton. Therefore, since Proton A has a J-value of 3.0 Hz, Proton B will have a J-value less than 3.0 Hz.
To know more about Proton Coupling, visit:
https://brainly.com/question/28203099
#SPJ4
a collection of 6.25×1018 electrons has the charge of
With a total charge of roughly 1.0 Coulomb, a group of 6.25 x 1018 electrons can be measured.
A single electron has a charge of about 1.602 x 10-19 Coulombs.
We can multiply the quantity of electrons by the charge of a single electron to determine the total charge of a group of electrons:
Total charge = (electron count) x (charge of a single electron)
Total charge is 1.602 x 10-19 C/electron x 6.25 x 10-18 electrons.
Charge total = 1.0 C
As a result, a group of 6.25 x 1018 electrons has an about 1.0 Coulomb overall charge.This calculation can be useful in many contexts, such as in the study of electric circuits, electromagnetism, and semiconductor devices.
Learn more about electron here:
https://brainly.com/question/1255220
#SPJ4
The slit opening is a = 10 mm and the distance between the slit and the screen is L = 3 m. Calculate l for light of wavelength 500 nm.
The initial maxima speed for light with a 500 nm wavelength is 5 mm/s.
How is the calculation for light diffraction done?Hence, given the distance to a screen, the breadth of the slit, and the wavelength of the light, we can apply the equation y = L l / a to pinpoint the location of the initial diffraction minimum with in single slit diffraction pattern.
Its Type III dispersion is intended for applications such general carparks and streets where a larger illumination area is required. Type III lighting must be placed to one side of the area in order for it to illuminate the entire area. As a result, there's a filling light flow.
According to the given data:Distance between slits and screenD=3m
Distance between slits d=10 mm
Speed v=4 m/s
v β =5×10 −3 m/s
= 5 mm/s
To know more about slit diffraction visit:
brainly.com/question/29451443
#SPJ1
which type of radioactivity has a negative charge?
The type of radioactivity that has a negative charge is beta decay
What is beta decay?Beta decay is a type of nuclear decay that occurs when an unstable atomic nucleus emits a beta particle. Beta particles are high-energy electrons or positrons that are ejected from the nucleus during the decay process. Beta decay can occur in two ways:
Beta-minus decay (β−): In this type of beta decay, a neutron in the nucleus is converted into a proton, an electron, and an antineutrino. The electron is emitted from the nucleus as a beta particle, while the proton remains in the nucleus. The atomic number of the nucleus increases by one, while the mass number remains the same.Beta-plus decay (β+): In this type of beta decay, a proton in the nucleus is converted into a neutron, a positron, and a neutrino. The positron is emitted from the nucleus as a beta particle, while the neutron remains in the nucleus. The atomic number of the nucleus decreases by one, while the mass number remains the same.Beta decay can occur in isotopes of many elements, including carbon-14, which is used in radiocarbon dating, and iodine-131, which is used in nuclear medicine. Beta decay is also an important source of energy in nuclear power plants.
To know more about Beta Decay, visit:
https://brainly.com/question/27770519
#SPJ4
in what direction do the planets revolve around the sun?
The planets revolve around the sun in the same direction, counterclockwise, when viewed from above the North Pole of the sun. This direction is also known as prograde motion.
How is prograde motion caused?The reason for this is due to the formation of the solar system. It is believed that the planets were formed from a rotating disk of gas and dust called the solar nebula. As the nebula rotated, it flattened into a disk, and gravity caused the material to clump together, forming the planets.Since the nebula was rotating in a particular direction, the planets that formed from it inherited that same direction of rotation. This is also known as the conservation of angular momentum, which states that a rotating object will maintain its rotation unless acted upon by an external force.
There are some exceptions to this, however. Venus and Uranus have a retrograde rotation, meaning they rotate in the opposite direction to the other planets.
To know more about prograde motion , check out :
https://brainly.com/question/22921263
#SPJ4
what wavelengths correspond to the visible spectrum
The visible spectrum ranges from approximately 400 nanometers (nm) to 700 nm, with violet light having the shortest wavelength and red light having the longest wavelength.
What are wavelengths?The distance between two peaks or troughs in a wave is measured in wavelengths. The characteristics of electromagnetic radiation, such as light, radio waves, and X-rays, are frequently described using them. The wavelength of a wave can be used to calculate its energy, frequency, and velocity in physics. The frequency and energy of the wave increase with decreasing wavelength. The colors we perceive are caused by different wavelengths of light, with shorter wavelengths equating to blue and longer wavelengths relating to red. In disciplines like spectroscopy, astronomy, and telecommunications, an understanding of wavelengths is essential. In comparison to other types of electromagnetic waves, radio waves have the longest wavelengths. They range in size roughly from a few centimeters to many miles.
To know more about wavelengths, check out:
https://brainly.com/question/10750459
#SPJ4
A 6-kg bucket of water is being pulled straight up by a string at a constant speed.
The tension on the string is 58.8N
What does a string's tension force mean?
The force communicated through a rope, string, or wire when two opposing forces draw on it is known as tension. The tension force pulls energy equally on the bodies at the ends and is applied along the entire length of the wire. Every physical object in contact with another one applies some force to that object.
The pull that is designated as tension is in that direction. As a result, the tension will point toward the string or rope and away from the mass. When a mass is hanging, the string pulls it upward, applying an upper force, which causes the tension to be on the upper side.
F = ma
F = 6kg * 9.8 m/s2
F = 58.8 N.
To learn more about tension use link below:
https://brainly.com/question/24994188
#SPJ4
Compare using >,<,>,<,is greater than, comma, is less than, comma or ==equals. 777 kilograms 60{,}00060,00060, comma, 000 gram
Using >,<,>,<,is greater than, comma, is less than, comma or ==equals, the answer is 777700 kilograms < 60,000,000 grams (is less than).
What is are the use of mathematical signs?Mathematical signs are used to represent mathematical operations and to show relationships between mathematical expressions. Some common mathematical signs include:
Addition (+)Subtraction (-)Multiplication (x or *)Division (÷ or /)Equal to (=)Less than (<)Greater than (>)Less than or equal to (<=)Greater than or equal to (>=)Approximately equal to (~)These signs allow us to perform arithmetic operations, compare numbers, and express mathematical relationships in a clear and concise way.
Learn more on mathematical signs here:https://brainly.com/question/25421984
#SPJ1
The correct question is:
Compare using >,<,>,<,is greater than, comma, is less than, comma or ==equals. 777 kilograms 60,000,000 gram
true or false statement, phonemic encoding is emphasizing the sound of a word.
An emphasis on a word's sound is called phonemic encoding. By highlighting a word's physical structure, such as its length or printing, semantic encoding conveys meaning.
Where do phonemic and phonetic differ?Phonemic transcriptions depict how people hear certain sounds, whereas phonetic transcriptions give additional information about how the sounds are actually pronounced. To encapsulate phones or sounds and phonemes, we use square brackets, while slashes are used for both.
What is phonological sound?A speaking sound is known as a phoneme. One word can be distinguished from another by its smallest possible sound unit. Since sounds cannot be expressed in writing, we employ letters to stand in for or symbolize the sounds. An individual sound is represented by a grapheme, which might be a single letter or a group of letters.
To know more about Phonemic visit:
https://brainly.com/question/13126345
#SPJ4
A solid cylinder with a mass of 2. 53 kg and a
radius of 0. 026 m starts from rest at a height
of 2. 70 m and rolls down a 46. 8
◦
slope. What is the translational speed of the cylinder when it leaves the incline? The acceleration of gravity is 9. 81 m/s
2. Answer in units of m/s
The translational speed of the cylinder when it leaves the incline is 3.28 m/s.
To solve this problem, we need to use the conservation of energy principle, which states that the initial potential energy of the cylinder is equal to its final kinetic energy plus any remaining potential energy.
The initial potential energy of the cylinder is given by:
U_i = mgh
where m is the mass of the cylinder, g is the acceleration due to gravity, and h is the height of the incline. Substituting the given values, we get:
U_i = (2.53 kg)(9.81 m/s^2)(2.70 m) = 68.9 J
The final kinetic energy of the cylinder is given by:
K_f = (1/2)mv^2
where v is the translational speed of the cylinder when it leaves the incline. We also know that the cylinder will have rotational kinetic energy due to its rolling motion, given by:
K_rot = (1/2)Iω^2
where I is the moment of inertia of the cylinder and ω is its angular velocity. For a solid cylinder rolling without slipping, the moment of inertia is given by:
I = (1/2)mr^2
and the angular velocity is related to the translational speed by:
ω = v/r
Substituting these equations and simplifying, we get:
K_f + K_rot = (1/2)mv^2 + (1/4)mv^2
K_f + K_rot = (3/4)mv^2
Now, let's calculate the final potential energy of the cylinder. At the bottom of the incline, the cylinder will have a height of zero, so its potential energy will be:
U_f = mgh_cos(θ)
where θ is the angle of the incline. Substituting the given values, we get:
U_f = (2.53 kg)(9.81 m/s^2)(2.70 m)cos(46.8°) = 29.3 J
Using the conservation of energy principle, we can equate the initial potential energy to the final kinetic energy plus the final potential energy:
U_i = K_f + K_rot + U_f
Substituting the equations we derived earlier and simplifying, we get:
68.9 J = (3/4)mv^2 + 29.3 J
Solving for v, we get:
v = sqrt[(4/3)(68.9 J - 29.3 J)/m] = 3.28 m/s
Learn more about translational speed here
brainly.com/question/15443379
#SPJ4
Magnets are a mystery to scientists because scientists.
Magnetism is a mysterious force in this universe. Scientists don't fully understand why it occurs in the first place. They aren't sure why these particles have a north and south direction either, according to Live Science, and there are many different forms of magnetism.
What are magnets ?Anything that creates a magnetic field is considered to be a magnet. The most notable characteristic of a magnet is a force that pulls on other ferromagnetic materials, such as iron, steel, nickel, cobalt, etc., and attracts or repels other magnets. This invisible magnetic field is responsible for this property.
A substance or object that generates a magnetic field that has the potential to impact objects nearby. Magnetic materials, such as iron, are drawn to a magnet. A magnetic field is always present in permanent magnets. One of a magnet's two poles is its centre of the magnetic field.
Learn more about Magnets here:
https://brainly.com/question/14997726
#SPJ4
What planet has the hottest temperature
The planet with the hottest temperature is Venus.
In solar system, Venus is the second planet from the Sun and is often called Earth's sister planet due to their similar size and composition.
However, Venus has an extremely thick atmosphere made up of carbon dioxide and nitrogen, which causes a greenhouse effect that traps heat from the Sun.
This results in surface temperatures reaching up to 864 degrees Fahrenheit (462 degrees Celsius), making it the hottest planet in our solar system. Despite being closer to the Sun, Mercury, the first planet, does not have as high of a temperature due to its lack of an atmosphere to trap heat.
To know more about Venus here:
https://brainly.com/question/24969671#
#SPJ11
Submit Activity Log Week 2
Submit your completed Activity Log for this week here.
Please complete each area and make sure to include dates on your activity log.
Each activity log should include one week of physical activities.
A full week includes Monday - Sunday. Include at least 3 days of the same week. Full credit will only be given if all sections are completed.
Be sure to complete the heart rate section.
Please complete each area to receive full credit
Below is my activity log for for a week starting from Monday, February 20th, 2023 to Sunday, February 26th, 2023:
Monday, February 20th:
7:00am: 30-minute yoga session at home
12:00pm: 1-hour strength training at the gym
6:00pm: 30-minute jog around the neighborhood
What is the physical activities?Tuesday, February 21st:
8:00am: 45-minute indoor cycling class at the gym2:00pm: 30-minute walk during lunch break6:00pm: 45-minute hot yoga session at the studioWednesday, February 22nd:
7:00am: 30-minute HIIT workout at home1:00pm: 1-hour basketball game with friends at the park5:00pm: 30-minute jog around the parkThursday, February 23rd:
8:00am: 45-minute indoor rowing class at the gym2:00pm: 30-minute walk during lunch break6:00pm: 45-minute Pilates session at the studioFriday, February 24th:
7:00am: 30-minute strength training at home1:00pm: 1-hour Zumba class at the gym5:00pm: 30-minute jog around the neighborhoodSaturday, February 25th:
9:00am: 1-hour hike in the nearby nature reserve2:00pm: 30-minute swim at the community pool6:00pm: 45-minute kickboxing class at the gymSunday, February 26th:
10:00am: 1-hour yoga session at the park3:00pm: 30-minute walk around the lake7:00pm: 30-minute jog around the neighborhoodTherefore, this week consisted of a mix of cardio, strength training, and flexibility exercises. The activities varied between indoor and outdoor, as well as group and individual workouts. The inclusion of different activities helps to keep things interesting and maintain motivation.
Learn more about physical activities from
https://brainly.com/question/1744272
#SPJ1
what units do we use to measure the force of gravity?
Normally, Newtons are used to measure the gravitational force (N).
When two mass-containing objects are in close proximity to one another, a force of some sort is produced. It is pointed in the direction of the larger object's centre and has a magnitude that is dependent on the masses of the two objects and their separation. The force needed to accelerate a mass of one kilogram at a pace of one meter per second squared is known as the Newton (N), and it is represented by the symbol N. Gravitation is a significant force in many branches of research and engineering, including physics, astronomy, and aerospace, and it may be measured using a variety of tools, such as a spring scale or a balance.
Learn more about significant force here:
https://brainly.com/question/29897437
#SPJ4
Impulse problem. The PC has plotted the force applied by the force transducer to the car. In principle, the proper way to use this information is to integrate the transducer signal to obtain F dt. This could be done numerically by the computer but would be of little educational value. Instead, we use an approximate technique often used in practice. Assume the signal looks like the one in Figure 5.4. Then the impulse can be approximated by LaTeX: \int∫ Fdt=Fmax LaTeX: \DeltaΔt, where Fmax is the maximum force and LaTeX: \DeltaΔ t is the Full Width Half Maximum (FWHM) of the signal. Theoretically, LaTeX: \int∫ F dt = LaTeX: \DeltaΔ p. Use the above graph to compute the impulse in kgm/s. Please express your answers with 1 decimal place. _______________________________kgm/s
When the maximal force and Full Width Half Maximum (FWHM) of the signal are combined, impulse would be roughly: if Fmax is 1000 N, and t is 0.1 s.
the result is in newton-seconds (Ns) or kilogrammes per second (kg/s), and is used to approximate the impulse.
I am unable to give a precise response without access to Figure 5.4. However, depending on the data given, the impulse can be roughly described as:
Fmax x t Impulse
where t is the Full Width Half Maximum (FWHM) of the signal and Fmax is the maximum force.
You must convert the force units to newtons and the time units to seconds before multiplying the two values to obtain the impulse in kilogrammes per second (kgm/s). The outcome will be expressed in newton-seconds (Ns) or kgm/s.
For instance, the impulse would be roughly: if Fmax is 1000 N, and t is 0.1 s.
1000 N x 0.1 s of an impulse equals 100 Ns or 100 kgm/s (to 1 decimal place).
Learn more about maximal force here:
https://brainly.com/question/11826042
#SPJ4
A skateboarder on a ramp is accelerated by a nonzero net force. For each of the following statements, state whether it is always true, never true, or sometimes true.
Part A
The skateboarder is moving in the direction of the net force.
The skateboarder is moving in the direction of the net force.
a. Always true
b. Sometimes true
c. Never true
Part B
The acceleration of the skateboarder is at right angles to the net force.
The acceleration of the skateboarder is at right angles to the net force.
a. Always true
b. Sometimes true
c. Never true
Part C
The acceleration of the skateboarder is in the same direction as the net force.
The acceleration of the skateboarder is in the same direction as the net force.
a. Always true
b. Sometimes true
c. Never true
Part D
The skateboarder is instantaneously at rest.
The skateboarder is instantaneously at rest.
a. Always true
b. Sometimes true
c. Never true
In order to comprehend how objects move and accelerate, it is crucial to understand the idea of net force in physics. The interactions between objects that alter motion are known as forces. Thus option 1. B, 2. C 3. A 4. C
What does net force mean?Part A: If the skateboarder is moving in the direction of the net force, they will keep moving in that direction. The skateboarder will slow down or perhaps halt if the net force is acting in the opposite direction of their speed.
The skateboarder will move in a direction between the two if the direction of motion and the net force are at an angle.
Part B: Newton's second law, F = ma, states that the skateboarder's acceleration is parallel to the direction of the net force. The acceleration and net force are proportionate and in the same direction.
Part C: This is a result of Newton's second law, which states that F = ma. The acceleration and the direction of the net force are directly related.
Part D: As the net force is what propels acceleration, if the skateboarder were instantly at rest, there would be no net force acting on them.
Therefore, When an object is subject to a net force that is not zero, the object will accelerate in that direction.
Learn more about force here:
https://brainly.com/question/18109210
#SPJ4
a. A 9-volt battery will increase the potential energyof 1 coulomb of charge by ____ joules.
b. A 9-volt battery will increase the potential energy of 2coulombs of charge by ____ joules.
c. A 9-volt battery will increase the potential energy of 0.5coulombs of charge by ____ joules.
d. A ___-volt battery will increase the potential energy of 3coulombs of charge by 18 joules.
e. A ___-volt battery will increase the potential energy of 2coulombs of charge by 3 joules.
f. A 1.5 volt battery will increase the potential energy of ____coulombs of charge by 0.75 joules.
g. A 12 volt battery will increase the potential energy of ____coulombs of charge by 6 joules.
Potential energy is the term used to describe the energy that is stored in an electrical system as a result of the separation of positive and negative charges in the context of electric charges and batteries.
What is potential energy?A 9-volt battery will result in a 9-joule increase in the potential energy of a single coulomb of charge.b. The potential energy of a 2 coulomb charge will increase by 18 joules with a 9-volt battery.c. A 9-volt battery will add 4.5 joules to the potential energy of 0.5 coulombs of charge.
d. The potential energy of a 3 coulomb charge will increase by 18 joules with a 6-volt battery.e. A 1.5-volt battery will add 3 joules of potential energy to a 2 coulomb charge.f. A 1.5-volt battery will boost the 0.5 coulombs of charge's potential energy by 0.75 joules.
g. A 12-volt battery will provide a 6 joule increase in the potential energy of 0.5 coulombs of charge.
Therefore, The energy that an object has as a result of its position or configuration is known as potential energy.
Learn more about potential energy here:
https://brainly.com/question/24284560
#SPJ4
The apparent path of the Sun, relative to the stars on the celestial sphere, over the course of a year. It is the orbit of the earth extended to the celestial sphere is called?
The apparent path of the Sun, relative to the stars on the celestial sphere, over the course of a year. It is the orbit of the earth extended to the celestial sphere is called ecliptic.
The celestial sphere is an imaginary sphere that surrounds the Earth, used by astronomers to describe the positions and movements of celestial objects such as stars, planets, and galaxies. The concept of the celestial sphere was introduced by ancient Greek astronomers, who believed that the stars were fixed on a giant sphere that surrounded the Earth.
This sphere was thought to rotate around the Earth, creating the illusion of the stars moving across the sky. The celestial sphere is divided into 88 constellations, each containing stars that are visible from Earth. The celestial sphere has several important reference points, such as the celestial equator, which is the projection of Earth's equator onto the sphere, and the ecliptic, which is the path of the Sun across the sky throughout the year.
To learn more about Celestial sphere visit here:
brainly.com/question/13196153
#SPJ4
Describing the Relationship between Force and Collision Time
Your class is performing an experiment which involves dropping an object from a great height. Your job is to minimize the damage to the object. Use your knowledge of momentum, force, and collision time to complete the sentence, using the drop-down menus.
While the change in{ ? }will remain the same during a collision, the force needed to bring an object to a stop can be{ ? }if the time of the collision is{ ? }
PLEASE HELP ASAP!!
The words that complete the blanks are momentum, decreased and increased.
What is the momentum?Momentum is a property of an object that is moving and is defined as the product of its mass and velocity. Mathematically, momentum (p) is given by the equation:
p = m * v
where:
p = momentum
m = mass of the object
v = velocity of the object
Momentum is a vector quantity, which means it has both magnitude and direction. The direction of momentum is the same as the direction of the velocity.
Learn more about momentum:https://brainly.com/question/30677308
#SPJ1
in what ways are electric and magnetic fields similar and in what ways are they different?
We can make simple model of the human vocal tract as an open-closed tube extending from the opening of the mouth to the diaphragm. What is the length of this tube if its fundamental frequency equals typical speech frequency of 250 Hz? The speed of sound in the warm air is 350 m/s:
The length of the tube that would result in a fundamental frequency of 250 Hz is approximately 0.7 meters. Keep in mind that this is a simple model and the actual length of the human vocal tract is much more complex and varies between individuals.
What is frequency?
The frequency of a wave is the number of complete cycles of the wave that occur in a unit of time, usually measured in hertz (Hz). It is a measure of how many oscillations or vibrations occur in a given time period.
Calculation:
The fundamental frequency of a tube is given by the formula:
f = v/2L
where v is the speed of sound in the air, and L is the length of the tube.
By rearranging the equation, we can find the length of the tube:
L = v/2f = (350 m/s) / (2 * 250 Hz) = 0.7 m.
To know more about frequency, visit:
brainly.com/question/27151918
#SPJ4
what is g/cc to kg/m3 conversion?
Both g/cc (grams per cubic centimeter) and kg/m3 (kilograms per cubic meter) are units of density, with the former being more commonly used in some industries such as mining and metallurgy.
To convert from g/cc to kg/m3, you can use the following conversion factor:
1 g/cc = 1000 kg/m3
Metallurgy is the branch of science and technology that deals with the extraction, refining, and processing of metals from ores. It is an essential field that has been around since ancient times, when humans first discovered the use of metals. Metallurgists work with metals such as iron, copper, gold, and silver, among others. Metallurgy has a wide range of applications, from creating durable tools and building structures to producing energy-efficient vehicles and electronics.
The process of metallurgy involves several stages, including mining, crushing, grinding, and separating the ore from the metal. Once the metal is extracted, it undergoes refining processes to remove impurities and improve its quality. Metallurgy also involves the study of the physical, chemical, and mechanical properties of metals, as well as their behavior under different conditions.
To learn more about Metallurgy visit here:
brainly.com/question/28303708
#SPJ4
what percentage of earth is covered in snow and ice? a) 5% b) 10% c) 15% d) 20%
The correct answer is d) 20%. Approximately 20% of the Earth's surface is covered in snow and ice.
What is the percentage of Earth?This includes the polar ice caps, glaciers, and sea ice. The majority of the ice and snow cover is found in the polar regions, where it plays an important role in the Earth's climate and affects global sea levels.
It's worth noting that the amount of ice and snow cover on the Earth's surface is constantly changing due to various factors, including changes in temperature and precipitation, as well as human activities such as deforestation and greenhouse gas emissions.
To know more about earth , visit:
https://brainly.com/question/12041467?referrer=searchResults
#SPJ4
what property of earthquakes does the richter scale measure?
The Richter scale is a logarithmic scale for measures the magnitude or intensity of an earthquake. It was developed in 1935 by Charles Richter and is used to measure the size of earthquakes all over the world.
The scale ranges from 0 to 10, with each level representing a ten-fold increase in ground shaking. The Richter scale is based on the amplitude of the seismic waves recorded on a seismograph.
These waves are used to accurately measure the size of an earthquake. The higher the magnitude of an earthquake, the more intense the shaking and the greater the damage it can cause.
The Richter scale is a valuable tool for studying earthquakes and assessing their potential to cause destruction.
It is also used to compare the size of different earthquakes and helps scientists to better understand how they form and how they can be managed.
To know more about Richter scale,
https://brainly.com/question/24037139
#SPJ4
What is reductionism in simple terms?
Reductionism is a philosophical and scientific approach that seeks to explain complex phenomena in terms of simpler or more fundamental components.
Reductionism is a philosophical and scientific approach that seeks to explain complex phenomena in terms of simpler, more fundamental components or principles. It assumes that everything can be reduced to its basic building blocks, and that understanding these building blocks is sufficient to explain the behavior of more complex systems.
Reductionism has been a powerful tool for breaking down complex systems into simpler parts that can be studied and understood. It has been particularly useful in fields such as physics, where the behavior of complex systems can often be explained in terms of fundamental particles and forces. Reductionism has also been criticized for oversimplifying complex phenomena and ignoring the emergent properties that arise from interactions between components.
To learn more about Reductionism visit here:
brainly.com/question/28901579
#SPJ4
comets tend to be ________ than asteroids, and it is estimated that there are far ___________ large comets than large asteroids.
There are reportedly far more massive comets than large asteroids, and comets are often quicker than asteroids.
How do comets work?Comets are understood to be ice things made up of frozen gases, minerals, and dust that were left over after the solar system's origin some 4.6 billion years earlier. They travel in extremely elliptical orbits around the sun, some of which can takes hundreds of millions of years too complete.
Do comets pose a threat to Earth?Globally, feral cats are to blame for the extinction of thousands of animals and small mammals. They have also played a role in the eradication of several island-based species and habitats. There are estimates that between 100 and 350 million birds are killed annually in Canada by outdoor cats.
To know more about comets visit:
https://brainly.com/question/24662890
#SPJ4