an atom's identity is directly determined by a. the number of electrons it has b. the number of neutrons it has c. the number of protons it has d. the number of bonds it can form e. its atomic weight

The molar mass of the unknown gas is 8.05 g/mol.

The ratio of effusion of an unknown gas to oxygen is 0.50:1, which means that the effusion rate of the unknown gas is half that of oxygen. Effusion is the process by which a gas escapes through a tiny hole into a vacuum, and the rate of effusion is directly proportional to the square root of the gas' molar mass. So, we can use this relationship to calculate the molar mass of the unknown gas.

Let's assume that the molar mass of oxygen is 32 g/mol. Then, the square root of the molar mass of oxygen is √32 = 5.66. If the effusion rate of the unknown gas is half that of oxygen, then the square root of its molar mass is 0.5 * 5.66 = 2.83. Taking the square of 2.83 gives us 8.05, which is the molar mass of the unknown gas.

Therefore, the molar mass of the unknown gas is 8.05 g/mol.

Learn more about effusion rates here: https://brainly.com/question/2655041

#SPJ4

145

173

216

The rate at which a chemical response proceeds. it's far often expressed in phrases of both the awareness (quantity in line with unit extent) of a product that is shaped in a unit of time or the attention of a reactant that is eaten up in a unit of time.

The response fee or rate of response is the velocity at which a chemical reaction takes location, described as proportional to the increase within the concentration of a product in step with unit time and to the lower within the awareness of a reactant according to unit time. response quotes can vary dramatically. charge of response is normally given by the change in awareness with respect to time so we will outline the unit of charge of response as awareness/time in which the unit of concentration is mol/L and let us think time is in seconds then units of charge of reaction will (mol/L)/sec

To learn more about Reaction rate visit here:

brainly.com/question/13440548

#SPJ4

There are 18.45 grammes in 0.58 moles of oxygen.

In chemistry, a mole is a unit of measurement that is used to express how much a chemical substance is present. To measure amounts in molar mass, chemical reactions, and solutions, one mole of a substance is equivalent to 6.02214076 x 1023 of that substance's atoms, ions, or molecules.

The given equation describes the reaction between oxygen and potassium chlorate (KClO3) (O2).

The following computation can be done to convert 18.45 grammes of O2 to moles:

32 grammes are equivalent to one mole of oxygen.

18.45 g / 32 g/mol is equal to 0.5765 moles O2.

Thus, 0.58 moles of oxygen are equal to 18.45 grammes of oxygen.

To know more about mole, visit:

https://brainly.com/question/26416088

#SPJ1

Evaporate then condense then precipitate then runoff

Explanation:

greenhouses use this information

lot of cold places like in russia have greenhouses to grow crops

you make a mini version of a greenhouses in your home with a soda bottle

Water Cycle Transformations

The water cycle depends on the transformation of water into different forms. Starting as liquid, water can:

Evaporate: The transformation of liquid water into water vapor is important for the water cycle. When water on the Earth's surface, such as in oceans, lakes, and rivers, is heated by the sun, it turns into water vapor and rises into the atmosphere.

Condense: As the water vapor rises, it cools and transforms back into liquid water through a process called condensation. This is important because the water droplets eventually form clouds, which can lead to precipitation.

Precipitate: Precipitation is another important transformation of water in the water cycle. When the clouds become heavy with water droplets, they release the water in the form of rain, snow, sleet, or hail.

Runoff: The water that falls to the ground in precipitation can then flow over the surface of the land, as runoff, eventually making its way back into the oceans, lakes, and rivers, where the cycle starts again.

The transformation of water from one state of matter to another is essential for the water cycle because it ensures that water is continually recycled and available for plants, animals, and humans to use. Without these transformations, the water on Earth would not be able to sustain life as we know it.

chatgpt

The final temperature of mixing 100.0 g of water at 24.2°C with 75.0 g of water at 78.7°C is 46.77⁰C

Let the Final Temperature be T

Heat flow equation:

                                      q = ± mcΔT

m = mass

c = Specific heat

ΔT = Temperature difference.

Heat lost by hot water = 75 g x c x (77 - T)

Heat gained by cold water = 100g x c x (T- 24.1)

When it is mixed.

Heat gained = Heat lost

75 g x c x (77 - T) = 100g x c x (T- 24.1)

           5775 - 75T = 100T – 2410

          575 + 2410 = 1007 + 75T

                     8185 = 175T

                            T = 8185/175

                            T = 46.77⁰C

The final temperature of mined water = 46.77⁰C

Learn more about the final temperature at https://brainly.com/question/25677592

#SPJ4

Nonpolar molecular solid does not have a large quantity of charge at extreme end.  In the polar molecular solids, Hydrogen bonds occur.

Nonpolar solids which are also known as Non-polar molecular solids are composed of weak dispersion forces and are soft by nature. Their molecules are held by weak London forces or dispersion forces. Nonpolar solids mostly exist in a gaseous or liquid state At room temperature and pressure.

Hydrogen Bonded Molecular Solids have polar covalent bonds between hydrogen and fluorine or Oxygen Nitrogen atoms. Strong hydrogen bonding binds molecules of solids as H2O in ice form.

so we can conclude that there is no profusion of charge at the opposite end in the Nonpolar molecular solid.  Hydrogen bonds occur in polar molecular solids.

Learn more about hydrogen bonds here:https://brainly.com/question/1420470

#SPJ1

By determining the levels of carbon dioxide for over the past 800,000 years, it become evident that the levels of carbon dioxide in atmosphere were never high as it is now.

Determining carbon dioxide levels in atmosphere are done by detecting the amount in air trapped in ice cores for thousands of years, by detecting the amount of carbon dioxide in tree rings and by chemical analysis of ocean sediments.

It means that atmospheric carbon dioxide have reached levels that were not seen for over 800,000 years. The atmospheric concentration last year has reached 405 ppm. Its effect along with other global warming gases like methane and nitrous oxide, higher temperatures were observed in most countries.

So scientists now know that only before 800,000 years, long before humans inhabited the planet, that the carbon dioxide levels are reaching this high.

For more information regarding components of Atmosphere, kindly refer

https://brainly.com/question/15882185

#SPJ4

Answer:

Yes

Explanation:

The reaction will take place as follows: There will be the reaction taken place between magnesium and sodium chloride react to give magnesium chloride and Sodium, as because sodium is a reactive metal.

Answer: Yes

Explanation: The reaction will take place as follows: There will be the reaction taken place between magnesium and sodium chloride react to give magnesium chloride and Sodium, as because sodium is a reactive metal.

Answer:

2 Fe + 3 (H2SO4) = Fe2(SO4)3 + 3H2

Explanation:

Hello, always remember that balancing equations is having one side(the reactants) equal to the same amount as the other side(the products). In this example you would like to look on each side and see what has more of what and how you can equal it.

1. First add a 2 Coefficient to Fe because there is 2 Fe on the product side due to Fe2(SO4)3

2. In Fe2(SO4)3 we can see the 3 at the very end that is distributed to the Sulfur and Oxygen. This means we have to go to the other side due to SO4 only being distributed by nothing, there is no 3 so that is why we put a 3 coefficient in front of H2SO4.

3. Because we put that 3 in front of H2SO4, this cause the hydrogen on the product sign to be imbalanced so we put a 3 coefficient infront of the H2 on the product side.

*Always remember to multiply the coefficient and/or subscripts.

It will be necessary to make the adjustment that Rayleigh as well as Love's waves go through both solids and liquids. Therefore, the correct option is option B.

An acoustic wave that passes through into the Earth or perhaps another planetary body is called a seismic wave. It can be caused by a major landslide, a volcanic eruption, a magma flow, an earthquake (or typically a quake), a massive man-made explosion that releases low-frequency acoustic energy, or an earthquake.

Seismologists study seismic waves, which they record using seismometers, hydrophones (under water), or accelerometers. It will be necessary to make the adjustment that Rayleigh as well as Love's waves go through both solids and liquids.

Therefore, the correct option is option B.

To learn more about seismic wave, here:

https://brainly.com/question/13056218

#SPJ1

Your question is incomplete but most probably your full question was,

"The following table was made to compare the different seismic waves. What correction needs to be made?

A. Rayleigh waves have a rolling movement and Love waves have a horizontal movement perpendicular to the wave.

B. Rayleigh and Love waves travel through solid and liquid.

C. Rayleigh and Love waves are body waves, and P-waves and S-waves are surface waves.

D. P-waves have a vertical movement perpendicular to the wave and D-waves have a compression movement."

The enthalpy of vaporization for the liquid is 40.7 kJ/mol.

The slope of the graph, -4830 K, can be used to calculate the enthalpy of vaporization (ΔHvap) using the Clausius-Clapeyron equation:

ΔHvap = -RT^2 * dln(p) / d(1/T)

Where R is the gas constant (8.314 J/mol.K), T is the temperature in kelvin and dln(p) / d(1/T) is the slope of the graph.

By substituting the values, we get:

ΔHvap = -8.314 * (1/1000) * (-4830) = 40.7 kJ/mol

So, the enthalpy of vaporization for the liquid is 40.7 kJ/mol.

Learn more about vaporization:

https://brainly.com/question/11465845

#SPJ4

Day at which one-tenth of the original amount of P-32 remains i.e 10 g, t is 47 days.

The equation of above graph is y = -0.049x + 4.603  (y = mx +b)

Slope, average decay constant, m = -k = -0.049

decay constant, k = 0.049 /day

or it can be calculated by the integrated law equation :

ln [A] = -kt + ln [A]o

t = half life = t0.5

[A]o = 100 g

[A] at half-life = 100 g/2 = 50 g

k = 0.049/day

ln 50 = -0.049t0.5 + ln 100

3.912 = -0.049t0.5 + 4.605

3.912-4.605 = -0.049t0.5

-0.693 = -0.049 t0.5

half-life , t0.5 = -0.693/-0.049 = 14 days

day at which one-tenth of the original amount of P-32 remains i.e 10 g

ln [A] = -kt + ln [A]o

[A]o = 100 g

[A] = 10 g

k = 0.049/day

ln 10 = -0.049t+ ln 100

2.302 = -0.049t + 4.605

2.302-4.605 = -0.049t

-2.303 = -0.049 t

Day at which one tenth of original amount of P-32 is remained i.e 10 g  , t = -2.303/-0.049 = 47  days

The slope of a line is a degree of its steepness. Mathematically, the slope is calculated as "upward push overrun" (trade-in y divided by using trade-in x).A numerical measure of a line's inclination relative to the horizontal. In analytic geometry, the slope of any line, ray, or line phase is the ratio of the vertical to the horizontal distance among any points on it (“slope equals upward push over run”).

The slope formulation is used to calculate the steepness or the incline of a line. The x and y coordinates of the strains are used to calculate the slope of the lines. it is the ratio of the alternatives within the y-axis to the change within the x-axis. The slope of a line is its vertical trade divided by means of its horizontal change, also referred to as upward thrust overrun. if you have 2 factors on a line on a graph the slope is the alternate in y divided by using the change in x.

To learn more about slope visit here:

brainly.com/question/3605446

#SPJ4

The conformation of a polypeptide's backbone is described by the angles of rotation about the peptide bonds.

The most common type of conformation is an alpha helix, in which the peptide bond rotates at an angle of approximately 100 to 120 degrees in a clockwise direction. This arrangement of the peptide bond contributes to an increase in the stability of the polypeptide, as the bonds form hydrogen bonds between the amino acids. This arrangement also allows for more efficient folding of the polypeptide, allowing for better functionality of the proteins involved. To calculate the angle of rotation for a given polypeptide, the bond length, bond angle, and torsional angle must all be known. First, the bond length must be determined from the x-ray data.

Learn more about conformation here:

https://brainly.com/question/15215912

#SPJ4

A chemical reaction is said to be balanced if the number of atoms on the reactant and product sides are equal.

The conservation of mass and momentum is observed.

Reaction:

Al (s)+ CuCl2---> AlCl3+ Cu

Aluminum and copper precipitate are produced when copper chloride and aluminum combine.

Element Reactant Product

Al               1               1

Cu              1               1

Cl                2              3

The chlorine is not balanced.

2Al (s)+ 3CuCl2---> 2AlCl3+ 3Cu

element reactant product

Al             2              2

Cu            3               3

Cl              6               6

To know more about balanced visit

https://brainly.com/question/4328202

#SPJ4

Aqueous copper (II) sulfate and solid iron interact to form solid copper and aqueous iron (II) sulfate.

Fe = Iron. CuSO4 = copper (II) Sulfate. Cu = Copper. Sulfate of iron (II) = FeSO4. copper and iron (II). Copper + Iron (II) sulphate > sulphate. Cu(s) + FeSO4 (s) > Fe(s) + CuSO4 (aq) (aq). The previous equation is balanced. Fe(s) + CuSO4 (aq) —> Cu(s) + FeSO4 is the reaction's balanced equation (aq). Cu(OH)2(s) + 2 KCl(aq) = CuCl2(aq) + 2KOH(aq). The precipitate created in the aforementioned reaction, Cu(OH), is an illustration of a precipitation reaction. CuCl2: It has a solid, yellow-brown hue. KOH: Potassium hydroxide; it has a white, solid, deliquescent look. The generation of a solid form residue occurs during precipitation reactions, which are typically double displacement processes. When cations and anions in an aqueous solution interact, precipitate is created.

Learn more about Balanced equation here:

https://brainly.com/question/13435606

#SPJ4

The concentration of b(g) is 2.25 m, and the concentration of a(g) is 0.75 m.

Since the total amount of the two components, a(g) and b(g), remains constant throughout the experiment, the total concentration after the experiment can be expressed as:

3 m (a(g)) + 3 m (b(g)) = 0.75 m (a(g)) + b(g)

Rearranging this equation and solving for b(g), we find that:

b(g) = 3 m (a(g)) + 3 m (b(g)) - 0.75 m (a(g))

b(g) = 3 m - 0.75 m

b(g) = 2.25 m

What are the two components of concentration?

Concentration is determined mathematically by taking the mass, moles, or volume of solute and dividing it by the mass, moles, or volume of solution (or, less commonly, the solvent).

What are the components of the concentration of a solution?

Many solutions contain one component, called the solvent, in which other components, called solutes, are dissolved. An aqueous solution is one for which the solvent is water. The concentration of a solution is a measure of the relative amount of solute in a given amount of solution.

To know more about the concentration of a solution:

https://brainly.com/question/17206790

#SPJ4

Lead is melted and is poured into a mold to make fishing weights. This is an example of a physical change.

The material involved in a physical change has the same structural properties before and after the change. Texture, shape, temperature, and a change in the state of matter are examples of various physical changes. A substance's texture changes how it feels, and vice versa. For instance, a block of wood may seem rough to the touch, but smoothing the surface with sandpaper makes the wood feel smooth to the touch.

Examples of physical change include changes in the composition or size of materials. Transitions between states, such as from a solid to a liquid or a liquid to a gas, are examples of physical transformations. Some of the processes that result in physical changes include cutting, bending, dissolving, freezing, boiling, and melting.

To know about chemical change

https://brainly.com/question/2591189

#SPJ4

the complete question is

Lead is melted and is poured into a mold to make fishing weights. This is an example of a________change.

1) physical

2)chemical

According to the stoichiometry of the reaction taking place between titanium (IV) chloride and  magnesium chloride  , 50.197 g  of magnesium chloride are produced if 50 g TiCI is completely reacted.

It is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.

Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.In the given reaction, 189.67 g titanium (IV) chloride gives 190.42 g  magnesium chloride, thus 50 g titanium (IV) chloride will give 50×190.42/189.67= 50.197 g

Thus,50.197 g  of magnesium chloride are produced if 50 g TiCI is completely reacted.

Learn more about stoichiometry,here:

https://brainly.com/question/9743981

#SPJ1

Concentrated HCl is considered to be more reactive than dilute HCl acid.

This is because concentrated HCl has a higher concentration of hydrogen ions (H+) compared to dilute HCl, meaning that it can more easily donate hydrogen ions in reactions and therefore be more reactive. This property is related to the acidity of the solution, which is determined by the concentration of hydrogen ions in the solution.Concentrated HCl is considered to be more reactive than dilute HCl acid.   In general, the more hydrogen ions a solution contains, the more acidic the solution is and the more reactive it is.

Learn more about Concentrated here:

https://brainly.com/question/10725862

#SPJ4

The observation that 10 g of hydrogen gas always combines with 80 g of oxygen gas to form 90 g of water, even when there is more than 80 g of oxygen present in the reaction container, illustrates the law of conservation of mass.

The law of conservation of mass states that in a chemical reaction, the total mass of the reactants must equal the total mass of the products. This law holds true for all chemical reactions, regardless of the amount of reactants or products present. In this reaction between hydrogen and oxygen, the mass of the reactants (10 g hydrogen + 80 g oxygen = 90 g) is always equal to the mass of the product (90 g water), demonstrating the law of conservation of mass.

To know more about  law of conservation of mass, visit the link given below:

https://brainly.com/question/28711001

#SPJ4

There are three base units in the code for one amino acid.

What are the 3 bases that code for an amino acid?

Codons are made up of any triplet combination of the four nitrogenous bases adenine (A), guanine (G), cytosine (C), or uracil (U). Of the 64 possible codon sequences, 61 specify the 20 amino acids that makeup proteins and three are stop signals.

What is the 3 base code?

A three-base sequence in DNA or RNA is known as a codon. The codes in the coding strand of DNA and in messenger RNA aren't, of course, identical, because in RNA the base uracil (U) is used instead of thymine (T).

Why do codons have 3 bases?

The more bases there are per codon the more information you can code for. There are only 22 different amino acids, in consequence, we need a minimum of 3 bases per codon.

To know more about codons:

https://brainly.com/question/19006161

#SPJ4

Atoms are the basic building blocks of matter and are composed of three types of particles: protons, neutrons, and electrons.

The center of an atom, called the nucleus, contains positively charged protons and neutral neutrons. The number of protons in the nucleus is called the atomic number and determines what element the atom is.

Surrounding the nucleus are negatively charged electrons, which occupy shells or orbitals at various distances from the nucleus. The electrons are much lighter than the protons and neutrons and occupy most of the volume of the atom.

In summary, an atom can be described as a dense nucleus containing positively charged protons and neutral neutrons, surrounded by mostly empty space and negatively charged electrons.

Learn more about atom here: https://brainly.com/question/6904639

#SPJ4

Big data and cloud technology were the most important change agents in data sources. Big data has a significant impact on technology.

Cloud technology refers to the delivery of computing services—including servers, storage, databases, networking, software, analytics, and intelligence—over the internet (“the cloud”) to offer faster innovation, flexible resources, and economies of scale. Cloud technology allows users to access these services remotely from a cloud provider's servers, instead of managing the infrastructure and resources required to run the services on their own.

There are three primary types of cloud services: infrastructure as a service (IaaS), platform as a service (PaaS), and software as a service (SaaS). IaaS provides virtualized computing resources over the internet, while PaaS provides a platform for developing, running, and managing applications and services, and SaaS delivers software applications over the internet, on a subscription basis.

Find out more on cloud technology here: https://brainly.com/question/18709099

#SPJ1

When placed in solution, an inorganic substance dissociates completely, forming hydrogen ions and anions, the substance is known as acids.

An electrolyte is a compound that dissociates into ions whilst dissolved in water. Electrolytes behavior electric powered cutting-edge in aqueous answers or in a molten state. An acid is a substance or compound that releases hydrogen ions (H+) whilst in solution. In a sturdy acid, which includes hydrochloric acid (HCl), all hydrogen ions (H+), and chloride ions (Cl-) dissociate (separate) whilst positioned in water and those ions are now not held collectively via way of means of ionic bonding. Acids are materials that once dissolved in water launch hydrogen ions, H+(aq). Bases are materials that react with and neutralize acids, generating water.

To learn more about acids check the link below:

https://brainly.com/question/25148363

#SPJ4

The bracelet's density is 19.3 g/cm³, which is close to the density of gold (19.3 g/cm³) and silver (10.5 g/cm³). However, it's most likely made of gold due to its higher density.

To calculate the density of the b, divide the mass (in grams) by the volume (in cubic centimeters):

density = mass / volume

density = 135 g / 7 cm³

density = 19.3 g/cm³

Sine the density of the metal is relatively high, it's likely to be a dense metal like gold or platinum. However, the density of gold is 19.3 g/cm³, which is very close to the density of the bracelet. The density of silver is much lower, at 10.5 g/cm³, so it's less likely to be made of silver. Based on this information, it's most likely that the bracelet is made of gold.

Learn more about density here:

https://brainly.com/question/29775886

#SPJ4

The pH level of the sea water will goes up if we made sea water with some washing powder.

Alkali in detergents can upset the harmony of aquatic habitats by raising the pH of the water and resulting in chorological changes. Sometimes the chelating is really toxic: Because it forms exceptionally stable compounds with metals like iron or hemoglobin, EDTA (ethylene diamine tetra acetic acid) is poisonous. Bleaching agents, such as bleach and peroxides, are potent antioxidants that may also damage organic matter and produce highly harmful free radicals.

Detergents reduce the oxygenation of the water by creating foams. Their surfactant qualities enable them to disperse hazardous chemicals in aquatic environments by dissolving the molecules. Some detergents are strongly suspected of interfering with the metabolism of animals, particularly frogs (Anura, Urodela), fish, and humans. These pesticides are known as hormone-mimics (endocrine disruptors). They may result in fish and mollusk sex changes, a sharp reduction in frog populations, and a decline in human spermatogenesis.

To know more about Washing powder

https://brainly.in/question/22119090

#SPJ1

The results illustrate the law of multiple proportions since the oxygen atoms in A and B are in simple multiple ratios.

The formula of the oxides is SO₃ and SO₂ respectively.

Mass of sulfur in A = 3.50 g

Moles of sulfur in A = 3.50/32

Moles of sulfur in A = 0.11 moles

Mass of oxygen in A = 6.05 g

Moles of oxygen in A = 6.05/16

Moles of oxygen in A = 0.38

The mole ratio of sulfur to oxygen = 0.11 : 0.38

The mole ratio of sulfur to oxygen = 1 : 3

The formula of oxide = SO₃

Mass of sulfur in B = 2.80 g

Moles of sulfur in B = 2.80/32

Moles of sulfur in B = 0.088 moles

Mass of oxygen in B = 2.80 g

Moles of oxygen in B = 2.80/16

Moles of oxygen in B = 0.175

The mole ratio of sulfur to oxygen = 0.088 : 0.175

The mole ratio of sulfur to oxygen = 1 : 2

The formula of oxide = SO₂

The oxygen atoms in A and B are in simple multiple ratio.

Learn more about the law of multiple proportions at: https://brainly.com/question/2624012

#SPJ1

The difference in boiling points for oxygen and carbon dioxide is due to their respective molecular structures.

Oxygen is a diatomic molecule, meaning it contains two oxygen atoms bonded together, while carbon dioxide is a triatomic molecule, meaning it contains three atoms (one carbon and two oxygen). This difference in number of atoms leads to differences in boiling point, as oxygen has a boiling point of -183°C (90K) and carbon dioxide has a boiling point of -78°C (215K). To further explain the difference in boiling points, it’s important to understand the intermolecular forces at play. When molecules are cooled to a certain temperature, they will enter into a liquid state. At this time, the molecules’ kinetic energy is outweighed by the attractive forces between them. Oxygen is able to liquefy at a lower temperature than carbon dioxide because it has weaker intermolecular forces.

Learn more about oxygen here:

https://brainly.com/question/13370320

#SPJ4

After 15.0 mL of HCl has been added (half the volume of the titrant), the pH = 4.75 After 30.0 mL of HCl has been added (the entire volume of the titrant), the pH is around 1. the final ph value after the given volumes of titrant have been added is 1.

To calculate the pH after a certain volume of titrant has been added in a titration of 30.0 mL of 0.050 M NH3 with 0.025 M HCl, we need to find the concentration of NH3 and HCl at each stage of the reaction. The reaction between NH3 and HCl can be represented as:

NH3 + HCl -> NH4Cl

At the beginning of the titration, the concentration of NH3 is 0.050 M, and the concentration of HCl is 0. The addition of HCl will cause the concentration of NH3 to decrease and the concentration of HCl to increase. At the half-equivalence point (when exactly enough HCl has been added to react with half of the NH3), the concentration of NH3 is 0.025 M, and the concentration of HCl is also 0.025 M. At this point, the pH can be calculated using the Henderson-Hasselbalch equation:

pH = pKa + log([NH3-]/[NH4+]) where pKa = 4.75 for the NH3/NH4+ buffer system, and [NH3-] and [NH4+] are the concentrations of the unionized NH3 and the ammonium ion, respectively.

At this half-equivalence point, the pH = 4.75 + log(0.025/0.025) = 4.75

As the HCl is added in excess, the pH of the solution will continue to decrease until it reaches a value of around 1.

Here's a summary of the pH values after the addition of different volumes of HCl:

After 15.0 mL of HCl has been added (half the volume of the titrant), the pH = 4.75

After 30.0 mL of HCl has been added (the entire volume of the titrant), the pH is around 1.

Learn more about titrant here:

https://brainly.com/question/29491279

#SPJ4

The complete question is :

A 30. 0 ml solution of 0. 050 m nh3 was titrated with 0. 025 mil. After adding the following volumes of titrant, determine the pH.

a - 15ml

b- 30ml

3.6 ×10²⁴ atoms fluorine are in 410 g of UF[tex]_6[/tex]. Fluorine is an atomic number 9 chemical element with both the symbol F.

Fluorine is an atomic number 9 chemical element with both the symbol F. This is the smallest halogen as well as occurs as a very poisonous, pale yellow diatomic vapor under normal circumstances.

It is exceptionally reactive being the most electronegative active catalyst, reacting with all other elements save the light inert.

mole =  410 / 352.02 =1.16mole

number of atom= 1.16× 6.022×10²³=6.98×10²³

number of atom of fluorine =6× 6.98×10²³= 3.6   ×10²⁴ atoms

Therefore, 3.6 ×10²⁴ atoms fluorine are in 410 g of UF[tex]_6[/tex].

To learn more about fluorine, here:

https://brainly.com/question/10700214

#SPJ1

On  increasing the height of an object  mechanical energy gets converted to kinetic energy.

In physics, the kinetic energy of an object is the energy that it possesses due to its motion. It is defined as the work needed to accelerate a body of a given mass from rest to its stated velocity. Having gained this energy during its acceleration, the body maintains this kinetic energy unless its speed changes.

The same amount of work is done by the body when decelerating from its current speed to a state of rest. Formally, a kinetic energy is any term in a system's Lagrangian which includes a derivative with respect to time.

Learn more about kinetic energy,here:

https://brainly.com/question/26472013

#SPJ1