Answer:
5m/s²
Explanation:
The force exerted on an object is calculated using the formula ;
F = ma
Note that the upward force (F) is 148N
Where;
F = force (N)
m = mass (kg)
a = acceleration (m/s²)
The downward force towards gravity is F' = mg
F' = 10 × 9.8m/s²
F' = 98N
Net force (F - F') = m × a
148 - 98 = 10 × a
50 = 10a
a = 50/10
a = 5m/s²
A racecar accelerates uniformly from 18.5 mil to 46.1 m/s in 2.47 seconds.
What is the acceleration of the car?*
Answer:
The acceleration of the racecar is [tex]\mathbf{11.17~m/s^2}[/tex]
Explanation:
Uniformly Accelerated Motion
It's a type of motion in which the velocity of an object changes by an equal amount in every equal period of time.
Following the definition above, the acceleration is defined as:
[tex]\displaystyle a=\frac{v_f-v_o}{t}[/tex]
Where a is the constant acceleration, vo the initial speed, vf the final speed, and t the time.
The racecar goes from vo=18.5 m/s to vf=46.1 m/s in t=2.47 seconds, thus the acceleration is:
[tex]\displaystyle a=\frac{46.1-18.5}{2.47}[/tex]
[tex]\displaystyle a=\frac{27.6}{2.47}[/tex]
[tex]a = 11.17~m/s^2[/tex]
The acceleration of the racecar is [tex]\mathbf{11.17~m/s^2}[/tex]
Two ice skaters are at rest, Abby
and Ben. Abby has a mass of
52.5 kg. They push off each other.
After, Abby moves 1.59 m/s east,
while Ben moves 1.22 m/s west.
What is Ben's mass?
(Unit = kg)
Remember: right is +, left is -
I need this quickly!
Answer:68.4kg
Explanation:
1 An object is thrown vertically upward with an initial speed of 30m/s. after 4s the object is:
A moving down at 20m/s
B. moving up at 9.2 m/s
C. moving up at 9.2m/s
Dat its maximum height
E moving down at 9.2 m/s
Answer:
Answer: E moving down at 9.2 m/s
Explanation:
Vertical Launch Upwards
This occurs when an object is launched vertically up without taking into consideration any kind of friction with the air.
If vo is the initial speed, t is the time, and g is the acceleration of gravity, the speed of the object is given by:
[tex]v_f=v_o-g.t[/tex]
Considering the positive direction of the speed as upwards, if the speed is negative, it means the object is moving down back to the point where it was launched from.
The object is thrown with an initial speed of vo=30 m/s. Let's calculate its speed at t=4 s:
[tex]v_f=30-9.8\cdot 4[/tex]
[tex]v_f=30-39.2=-9.2[/tex]
[tex]v_f=-9.2\ m/s[/tex]
Since it's negative, the object is coming back down.
Answer: E moving down at 9.2 m/s
The stars in the model below are arrange by.... *
Answer:
where is the picture of star
7 km is an example of what
The 4.00 kg block is attached to a vertical rod by means of two strings. When the system rotates about the axis of the rod, the strings are extended as shown in the (Figure 1) and the tension in the upper string is 76.0 N.
Find the number of revolutions per minute at which the lower cord just goes slack.
Answer:
Let theta be angle of upper string with rod.
This a 3-4-5 triangle where R is distance of block from rod. (.75 - 1 - 1.25)
Fc = m w^2 R where Fc the centripetal force and w the angular velocity
Fc = T sin theta = T * .75 / 1.25 = .6 T = 45.6 N
w^2 = 45.6 / (4 * .75)
w = 3.90 /sec
RPM = 3.90 / sec * 60 sec / min / (2 * pi) = 37.2 RPM (2 pi rad / rev)
The number of revolutions per minute at which the lower cord just goes slack is 45.36 RPM.
The given parameters;
mass of the block, m = 4 kgthe tension on the upper string, T₁ = 76 NThe following triangle can be formed from the given diagram;
|
| 1 m
|---------x--------(θ) 4.00 kg
The hypotenuse of this triangle = 1.25 m
The height of the triangle = 1 m
The base of the triangle is calculated as;
[tex]x^2 = 1.25^2 - 1^2\\\\x^2 = 0.5625\\\\x = \sqrt{0.5625} \\\\x = 0.75 \ m[/tex]
Resolving the vertical component of the force;
Tension at the upper = Tension at the lower string
[tex]T_1 sin(\theta) = T_2 sin(\theta) + mg\\\\76 \times \frac{1}{1.25} = T_2 \times \frac{1}{1.25} + (4\times 9.8)\\\\76 = T_2 + 39.2\\\\T_2 = 76 - 39.2\\\\T_2 = 36.8 \ N[/tex]
Resolving the horizontal component of the force;
[tex]T_1cos(\theta) + T_2cos(\theta) = F_c\\\\T_1cos(\theta) + T_2cos(\theta) = mr\omega^2 \\\\76\times \frac{0.75}{1.25} \ + \ 36.8\times \frac{0.75}{1.25}= 4\times 0.75\tmes (\frac{2\pi N}{60} )^2\\\\67.68 = 0.0329N^2\\\\N^2 = \frac{67.68}{0.0329} \\\\N^2 = 2057.14\\\\N = \sqrt{2057.14} \\\\N = 45.36 \ rpm[/tex]
Thus, the number of revolutions per minute at which the lower cord just goes slack is 45.36 RPM.
Learn more here: https://brainly.com/question/14973925
Once ignited, a small rocket motor on a spacecraft exerts a constant force of 10 N for 7.80s. During the burn the rocket causes the 100-kg craft to accelerate uniformly. Determine that acceleration
Answer:
a = 0.01 [m/s²]
Explanation:
To solve this problem we must use Newton's second law, which says that the sum of forces on a body is equal to the product of mass by acceleration.
ΣF = m*a
where:
F = forces = 10 [N]
m = mass = 100 [kg]
a = acceleration [m/s²]
10 = 100*a
a = 0.01 [m/s²]
How much force is needed to accelerate an object of mass 90 kg at a rate of 1.2 m/s²
Answer:
108 N
Explanation:
Use Newton's second law.
F = ma
F = (90 kg) (1.2 m/s²)
F = 108 N
What were the three topographical climate factors we talked about?
Group of answer choices
B.Grasslands, Tundra, Mountains
C.Dry Arid, Grasslands, Tundra
D.Dry Arid, Coastal, Mountains
A.Coastal, Dry Arid, Grasslands
Answer:
Dry Arid, Coastal, Mountains
Explanation:
Took the text
A 5000 kg open train car is rolling on frictionless rails at 22 m/s when it starts pouring rain. A few minutes later, the car’s speed is 20 m/s. What mass of water has collected in the car?
Answer:
500 kg
Explanation:
It is given that,
The mass of a open train car, M = 5000 kg
Speed of open train car, V = 22 m/s
A few minutes later, the car’s speed is 20 m/s
We need to find the mass of water collected in the car. It is based on the conservation of momentum as follows :
initial momentum = final momentum
Let m is final mass
MV=mv
[tex]m=\dfrac{MV}{v}\\\\m=\dfrac{5000\times 22}{20}\\\\=5500\ kg[/tex]
Water collected = After mass of train - before mass of train
= 5500 - 5000
= 500 kg
So, 500 kg of water has collected in the car.
The mass of the water collected in the car due to the rain is 500 kg.
The given parameters;
mass of the car, m = 5000 kgvelocity of the car, u = 22 m/sfinal speed of the car, v = 20 m/sThe mass of water collected in the car is determined by applying the principle of conservation of linear momentum as shown below;
[tex]m_cu_c = v(m_c + m_w)\\\\5000 \times 22 = 20(5000 + m_w)\\\\110,000 = 100,000 + 20m_w\\\\20m_w = 10,000\\\\m_w = \frac{10,000}{20} \\\\m_w = 500 \ kg[/tex]
Thus, the mass of the water collected in the car due to the rain is 500 kg.
Learn more here:https://brainly.com/question/24424291
You pass 633 nm laser light through a narrow single slit of width 0.24 mm and observe the diffraction pattern on a screen 6.0 m away. If the intensity at the central bright is Io , what is the intensity at a point on the screen 3.0 mm from the center of the pattern?
Answer:
The intensity is [tex] I = 0.0175I_o [/tex]
Explanation:
From the question we are told that
The wavelength is [tex]\lambda = 633 \ nm = 633*10^{-9} \ m[/tex]
The width of the slit is [tex]d = 0.24 \ mm = 0.00024 \ m[/tex]
The distance from the screen is [tex]D = 6.0 \ m[/tex]
The distance of the position considered from the center is [tex]y = 3.0 \ mm = 0.003 \ m[/tex]
Generally the intensity from at a point on the screen 3.0 mm from the center of the pattern is
[tex]I = I_o * \frac{sin^2 [\frac{\pi d * y}{ \lambda D } ]}{[\frac{\pi d * y }{\lambda D} ]^2}[/tex]
Here [tex]I_o[/tex] is the intensity of the central bright fringe
=> [tex] I = I_o * \frac{sin^2 [\frac{3.142 * 0.00024 * 0.003}{ 633*10^{-9} * 6 } ]}{[\frac{3.142*0.00024 * 0.003 }{633*10^{-9} * 6} ]^2}[/tex]
=> [tex] I = 0.0175I_o [/tex]
How are energy sources managed?
Could you link a site with a good answer?
Answer: When it comes to energy saving, energy management is the process of monitoring, controlling, and conserving energy in a building or organization. Typically this involves the following steps: Metering your energy consumption and collecting the data.
Explanation:
Millions of children are treated each year for sports-related injuries.
Is that True or False?
Answer:
True
Explanation:
As per a survey conducted in the United States, it has been highlighted that among 30 million children participating in any sports, there are 3.5 million children who face injuries. It is because of these injuries that the children have to take some leave or absence from the sports. Also, the statistics discloses the fact that among all the injuries faced by the humans, one third of them are related to the childhood sports activities. Sprains and strains are among the most common of the injuries.
Answer:
true
Explanation:
edge
I don’t get this can anyone give me the answerr
If Steve throws the football 50 meters in 3 seconds, what is the average speed of the football? Speed = distance / time Question 2 options: A. 16.67 m/s B. 26 m/s C. 5 m/s D. 48.9 m/s
Answer:
A. 16.67 m/s
Explanation:
Speed or velocity refers to the rate of change in distance over a change in time. That is;
Speed = Distance ÷ time
Where;
Speed is in metre/seconds
Distance is in metre
Time is in seconds.
In this question, Steve throws a football 50 meters in 3 seconds. The average speed can be calculated this:
S = D/t
Where; d = 50m, t = 3s
S = 50/3
S = 16.6666666
S = 16.67m/s
In order for a protostar to transition to a full fledge star, what must happen? options: A. Nuclear fusion must occur in the protostar B. Planets must form around the protostar
C. The protostar must cool down D. Accretion must occur in the rings around the protostar
We can see here that in order for a protostar to transition to a full fledge star, A. Nuclear fusion must occur in the protostar
What is protostar?A protostar is a massive cloud of gas and dust in space that has the potential to become a star and is currently collapsing due to its own gravity. It is the initial stage of a star's development.
The protostar will continue to collapse and get hotter and denser until the conditions are right for nuclear fusion, when it will fuse and turn into a star.
A star gets its energy through nuclear fusion, which is the process of joining atomic nuclei to create heavier atoms. The star is not hot enough or thick enough during the protostar phase for nuclear fusion to take place.
Learn more about protostar on https://brainly.com/question/891408
#SPJ1
A ball is thrown directly downward at 4 m/s from the edge of a high cliff. If needed, use g = 10 m/s2. With zero air resistance, the distance the ball falls during its third second of fall is most nearly
28 m
4 m
29 m
12 m
57 m
Answer:
57 meters
Explanation:
Let's see what variables we have in this problem:
[tex]v_i \ \ \ \ \ \ \ t \\ v_f \ \ \ \ \ \ \triangle x \\ a[/tex]Let's set the upwards direction to be positive and the downwards direction to be negative.
We are given the initial velocity, 4 m/s. Since the ball is thrown directly downward, we can say that the initial velocity = -4 m/s.
We are also given the acceleration due to gravity, and since the acceleration is pointing downwards, we can say that a = -10 m/s².
The time is also given to us; the question wants to know the vertical displacement at time = 3 seconds, so we can plug in 3 seconds for t.
Since we are solving for vertical displacement, we can use [tex]\triangle x[/tex] as one of our variables.
Now we have all of the variables except for the final velocity, [tex]v_f[/tex].
Since we are dealing with constant acceleration, we can use this constant acceleration equation:
[tex]x_f=x_i+v_it+\frac{1}{2}at^2[/tex]Subtract [tex]x_i[/tex] from both sides to get [tex]\triangle x[/tex].
[tex]\triangle x =v_it+\frac{1}{2}at^2[/tex]Substitute in the known values:
[tex]\triangle x = (-4\frac{m}{s})(3s) + \frac{1}{2}(-10\frac{m}{s^2})(3s)^2[/tex]Get rid of the units to make the equation more readable.
[tex]\triangle x = (-4)(3) + \frac{1}{2} (-10)(3)^2[/tex]Simplify the equation and solve for delta x.
[tex]\triangle x=(-12) -5(9)[/tex] [tex]\triangle x =-12-45[/tex] [tex]\triangle x = -57[/tex]The vertical displacement is -57 meters, so we can say that the distance the ball falls in 3 seconds is most nearly 57 meters.
6. Total current in a parallel circuit is equal to ?
Answer:
A Parallel circuit has certain characteristics and basic rules: A parallel circuit has two or more paths for current to flow through. Voltage is the same across each component of the parallel circuit. The sum of the currents through each path is equal to the total current that flows from the source.
Explanation:
mark me as brainliest please ♥️♥️
Hang two sheets of paper vertically from adjacent corners. The sheets should be parallel and close to each other with a small gap between them. Now gently blow down between the two sheets. What happens? a. The sheets move toward each other and the gap narrows. b. The sheets move away from each other and the gap widens c. Nothing happens. The gap between the two sheets remains constant.
Answer:
a. The sheets move toward each other and the gap narrows.
Explanation:
This exercise is related to fluid mechanics, when blowing between the two sheets, we can apply Bernoulli's equation, where the index 2 is the space between the two sheets
P₁ + ½ ρ g v₁² + ρ g y₁ = P₂ + ½ ρ g v₂² + ρ g y²
if the two leaves are at the same height
y₁ = y₂
whereby
P₁ + ½ ρ g v₁² = P₂ + ½ ρ v₂²
for the air velocity between the leaves let us use the continuity equation
A₁ v₁ = A₂ v₂
the area between the leaves is less than the external area, so the air speed must increase. If we use this in Bernoulli's equation, increasing the speed 2 (between the leaves) to maintain equality the pressure must decrease.
If the pressure decreases, the blades should move closer
When resisting the answers, the correct one is a
A 5.00 kg mass is placed on top of a vertical spring, which compresses a distance of 3.13 cm. Calculate the force constant (in N/m) of the spring
Answer:
1567.09 N/mExplanation:
Step one:
given data
mass m=5kg
compression x= 3.13cm to m= 0.0313m
According to Hooke's law, provided the elastic limit of an elastic material is not exceeded the extension e is directly proportional to the applied force
F=ke
where
k= spring constant in N/m
e= extension/compression in
Step two:
assume g= 9.81m/s^2
F=mg
F=5*9.81
F=49.05N
substitute in the expression F=ke
49.05=k*0.0313
k=49.05/0.0313
k=1567.09 N/m
The force constant (in N/m) of the spring is 1567.09 N/m
A penny was thrown downward at 2.4 m/s and falls under the influence of
gravity for 5 s. What is the final velocity of the penny?
Answer:
v = 51.4 m/s
Explanation:
Given that,
Initial velocity of a penny, u = 2.4 m/s
It fall under the influence of gravity for 5 s.
We need to find the final velocity of the penny. Let v is its final velocity. It can be calculated using first equation of motion as follows :
[tex]v=u+at[/tex]
a = g
[tex]v=2.4+9.8(5)\\\\=51.4\ m/s[/tex]
So, the final velocity of the penny is 51.4 m/s.
A balloon of diameter 20.0 cm is filled with helium gas at 30°C at 1.00 atm. How
many atoms of helium gas fill a balloon having a diameter of 20.0 cm at 30.0°C
at 1.00 atm?
Answer:
N = 3.54 * 10²³ atoms
Explanation:
The formula to apply here is the idea gas law;
PV = nRT where ;
P= pressure of the gas= 1.013 * 10⁵ Pa
V= volume of the gas = 4/3 * 3.14 *0.15³= 0.01414 m³
n= amount of a substance = ?
R= ideal gas constant= 8.314
T= temperature= 293 K
Applying the values to the formula;
PV = nRT
1.013 * 10⁵ * 0.01414 = n * 8.314*293
n= 1.013 * 10⁵ * 0.01414 / 8.314*293
n= 0.588 moles
1 mole = 6.022 * 10²⁷ atoms/ mole
0.588 moles = 0.588 * 6.022 * 10²⁷
N = 3.54 * 10²³ atoms
A 0.54 kg bullfrog is sitting at rest on a level log. How large is the normal force of the log on the bullfrog?
Answer:
5.3NExplanation:
Step one:
given data
mass of bullfrog= 0.54kg
Step two:
Required
The force F in Newton
From newton first law
F=mg
The acceleration due to gravity acting on the frog is 9.81m/s^2
hence
F=0.54*9.81
F=5.3N
The normal force is 5.3N
Please select the word from the list that best fits the definition The skeletons of tiny ocean animals grow together to form ______, structures that are found only in warm, clear ocean water.
Answer:
coral reef
Explanation:
A soccer player hits a 0.20 kg ball which is incoming with a speed 5 m/s. After the kick, the ball changes its direction by 90 degrees and keeps its original speed. What is the average force exerted by the player of the impact time is 0.02 seconds?
Answer:
70.7N
Explanation:
A truck with the mass of 8 ton travels at a velocity of 60km/h and collides
with a truck with a mass of 5 tons travelling in the same direction at 40km/h.
After the collision the two trucks move together.
Calculate the final common velocity if the TWO trucks in m/s after the
collision?
Answer:
52 km/h
Explanation:
When the two trucks move together after collision, the momentum of the system is conserved. The kinetic energy is not conserved. This is inelastic collision
The formula to apply here is :
m₁v₁ + m₂v₂ = {m₁+ m₂} *vf
Given that ;
m₁ = 8 ton ----convert to kg [ multiply by 907.185] =7258 kg
v₁ = 60 km/h
m₂ = 5 tons ------4536 kg
v₂ = 40 km/h
vf = final velocity
Using the values given;
m₁v₁ + m₂v₂ = {m₁+ m₂} *vf
8*60 + 5*40 = {8+5} * vf
480 + 200 = 13 * vf
680 = 13vf
680/13 = vf
52 km/h = vf
Which statement did Kepler’s investigations of the movement of the planets explain?
Jupiter has more moons than earth.
Gravity acts on all objects in the universe.
The sun is more massive than earth.
Earth is not the center of the universe.
Answer:
earth is not the center of the universe
Explanation:
i just took the test
Kepler's laws allow us to find that the correct answer, the basis is these is
d) Earth is not the center of the universe.
Kepler made extensive measurements and created a mathematical model of the movement of the planets around the sun, these analyzes are written in the form of three laws
Kepler's first law. Says the planets move elliptically Kepler's second law. Establish that the vector from the sun to the planet sweeps equal area in equal time intervals Kepler's third law. It is an application of Newton's second law to the movement of the planets around the sun, it gives a relationship between the period of the orbit and the semi-major axis of the ellipse.
[tex]T^2 = ( \frac{4\pi ^2}{G M_s} ) \ a^3[/tex]
Where T is the period, a the major axis, G the universal gravitational constant and [tex]M_s[/tex] the most of the sun.
When analyzing these Kepler's laws in all the sun is the center of movement.
Let's analyze the different claims;
a) False. The laws are not on a specific planet
b) False. Gravity is not in Kepler's laws
c) False. A ratio of the masses between planets and the sun is not established
d) True. In the laws the sun is the center of movement, therefore the earth is not the center of the universe.
In conclusion using Kepler's laws we can find that the correct answer for the bases of these is:
d) Earth is not the center of the universe.
Learn more here: brainly.com/question/9622816
The trunk of a elephant may extend up to 2.2 m. It acts much like an organ pipe only open at one end when the elephant blows air through it. 1) Calculate the fundamental frequency of the sound the elephant can create with its trunk.2) If the elephant blows even harder, the next harmonic may be sounded. What is the frequency of the first overtone?
Answer:
1) f = 38.63 Hz , 2) f = 115.9 Hz
Explanation:
The elephant's trunk can be approximated by a tube with a closed end, in pipes the closed ends correspond to nodes and the open ends to antinodes or bellies.
The expression for the wavelengths of this system is
4L = n λ
n = 1, 3, 5, 7 ...
also let's use the relationship between frequency and wavelength and wave speed
v = λ f
f = v / λ
f = v n / 4L
f = v / 4L n
1) the fundamental frequency occurs for n = 1
f = 340/4 2.2 1
f = 38.63 Hz
2) The first harmonic
n = 3
f = 340/4 2.2 3
f = 115.9 Hz
what is mass? what is mass ?
Answer:
Mass, in physics, quantitative measure of inertia, a fundamental property of all matter. ... It is, in effect, the resistance that a body of matter offers to a change in its speed or position upon the application of a force. The greater the mass of a body, the smaller the change produced by an applied force.
Explanation:
AnsA
Explanation:
The amount of matter in an object
Suppose the spark plug on a heat engine is not functioning properly which statement best explains how this will affect the engine?
Answer:
B. Burned gas...
Explanation:
The statement explains the importance of enzymes that check for and repair mistakes during DNA replication is the enzymes prevent many genetic mutations from being expressed.
What is RNA polymerase?RNA polymerase is an enzyme that aids in the transcription of DNA into RNA during transcript in the nucleus. The enzymes prevent many genetic mutations from being expressed.
Primase is an enzyme that synthesizes short RNA sequences called primers. These primers serve as a starting point for DNA synthesis during replication as the DNA polymerases cannot begin the synthesis of the new strand, they only extend it after primase begins it and primase produces RNA molecules, the enzyme can be said to be a type of RNA polymerase.
Therefore, The statement explains the importance of enzymes that check for and repair mistakes during DNA replication is the enzymes prevent many genetic mutations from being expressed.
Learn more about genetic mutations on:
https://brainly.com/question/1282397
#SPJ6