A tourist drops (from rest) a ping pong ball from the top of the tower, which has a height of 324 meters. Assuming no air resistance, how long does it

Answer:

Blank 1: 10

Blank 2: 4

Blank 3: 10

Blank 4: 5

Blank 5: 5

Answer:

[tex]\frac{dI}{dt} =-3*10^-^4amps/sec[/tex]

Explanation:

From the question we  are told that

Voltage decreases at   [tex]\frac{dv}{dt} =-0.03volts/sec[/tex]

Resistance increase at [tex]\frac{dR}{dt}=0.02ohms /sec[/tex]

Resistance at [tex]R=100ohms[/tex]

Current at [tex]I=0.02amps[/tex]

Generally the equation for ohms law is mathematically represented as

       [tex]V=IR[/tex]

Therefore

       [tex]\frac{dV}{dt} =R\frac{dI}{dt} +I\frac{dR}{dt}[/tex]

Generally making [tex]\frac{dI}{dt}[/tex] subject of the formula in the above equation mathematically gives

       [tex]\frac{dV}{dt} =R\frac{dI}{dt} +I\frac{dR}{dt}[/tex]

      [tex]R\frac{dI}{dt} = \frac{dV}{dt} -I\frac{dR}{dt}[/tex]

       [tex]\frac{dI}{dt} =\frac{1}{R} (\frac{dV}{dt} -I\frac{dR}{dt})[/tex]

Therefore

       [tex]\frac{dI}{dt} =\frac{1}{100}((-0.03) -(0.02)*(0.02))[/tex]

Generally it is given that the change in current is

       [tex]\frac{dI}{dt} =-3*10^-^4amps/sec[/tex]

Answer:

The length of the simple pendulum is 0.248 m.

Explanation:

Given;

period of the simple pendulum, T = 1.00 s

let the length of the simple pendulum = L

The period of oscillation of a simple pendulum is calculated as;

[tex]T = 2\pi \sqrt{\frac{l}{g} } \\\\\frac{T}{2\pi } = \sqrt{\frac{l}{g} }\\\\\frac{T^2}{4\pi ^2 } = \frac{l}{g}\\\\l = \frac{gT^2}{4\pi ^2 } \\\\l = \frac{(9.8)(1)^2}{4\pi ^2 } \\\\l = 0.248 \ m[/tex]

Therefore, the length of the simple pendulum is 0.248 m.

Answer:

O²⁻

Explanation:

Number of protons  = 8

Number of neutrons  = 9

Number of electrons  = 10

What type of atom or ion is it = ?

Solution:

Protons are the positively charged particle in an atom

Neutrons do not carry any charges

Electrons are negatively charged particles

 For this atom, the number of protons helps to identify what specie it is; so this is an oxygen atom.

Now,

     Charge  = Number of protons  - Number of electrons

      Charge  =  8  - 10  = -2

The charge on the atom is -2 and so it is an oxygen ion with -2 charge

 The ion is O²⁻

Answer:

[tex]\mathbf{\dfrac{\sigma_{mat}}{L} = 3.6 \ ns/ km}[/tex]

Explanation:

From the given information, the LED is operating with a given wavelength of 850 nm or 0.85 μm.

Hence, the material dispersion is [tex]\dfrac {d \tau _{mat}}{d \lambda } \simeq (80 \ ps / (nm.km) \ )[/tex]

Now, using the pulse spread formula:

[tex]\dfrac{\sigma_{mat}}{L} = \dfrac{d \tau _{mat} }{d \lambda} \sigma \lambda[/tex]

[tex]\dfrac{\sigma_{mat}}{L} = (80 \ ps/ ( m.km) \ ) \times (45 \ nm)[/tex]

Thus, the pulse spreading as a result of  material dispersion is:[tex]\mathbf{\dfrac{\sigma_{mat}}{L} = 3.6 \ ns/ km}[/tex]

The pulses spreading will be 3.6 ns/km. The greatest frequency or the number of pulses per second that may be transmitted into a fiber is pulse spreading.

As an optical pulse travels the length of a fiber, it widens. This feature, which is commonly represented in nanoseconds of widening per kilometer, restricts the usable bandwidth of the Fiber.

The greatest frequency, or the number of pulses per second that may be transmitted into a fiber and anticipated to emerge intact at the other end, has a limit.

This is due to a process known as pulse spreading, which restricts the file's "Bandwidth."

The given data in the problem is;

[tex]\lambda[/tex] is the wavelength = 850 nm

The pulse spreading formula is given as;

[tex]\rm \frac{\sigma_{mat}}{L} =\frac{d \tau_{mat}}{d \lambda} \sigma\lambda \\\\ \rm \frac{\sigma_{mat}}{L} = 80 \times 45 \\\\ \frac{\sigma_{mat}}{L} =3.6 \ ns/km[/tex]

Hence the pulses spreading will be 3.6 ns/km

To learn more about the pulse spreading refer to the link;

https://brainly.com/question/9351212

Answer:

See explanation

Explanation:

Electric field strength;

E = kq/d^2

k= coulombs constant

q= magnitude of charge

d = distance if separation

If

d is constant

q = 2q

Then;

E = 2 kq/d^2

Hence, the electric field strength will double.

Answer:

Zero gravity

Explanation:

Astronauts around the earth either in spaceship, a space station or on a space walk appear to be weightless because of the zero gravity in such environment.

Weight is a function of the mass and acceleration due to gravity a body has.

   Weight  = mass  x  acceleration due to gravity

In a place where acceleration due to gravity is 0, the weight would be zero and a person would appear to be weightless.

Answer:

Explanation:

Input​ refers to the amount of energy put into a device, and ​ output​ refers to the amount of energy that comes out. A device may change the type of energy but not the amount. For example, a light bulb's input energy is the form of electrical energy, and its output energy is in the form of light and heat. Efficiency.

Answer:

Statement B is the only true statement

"Decreasing the mass of an object increases its acceleration while force is  constant."

Explanation:

Recall that Newton's 2nd Law states:

F = m * a

Therefore, if the force (F) is constant, and the mass (m) decreases, the acceleration (a) of the object must increase.

This agrees with the statement labeled as B: "Decreasing the mass of an object increases its acceleration while force is  constant."

The true statement about the law of acceleration is that decreasing the mass of an object increases its acceleration while force is constant.

NEWTON'S LAW:

Learn more at: https://brainly.com/question/25116504?referrer=searchResults

Given that,

A system dissipates 12 J of heat into the surroundings.

28 J of work is done on the system.

To find,

The internal energy of the system.

Solution,

The first law of thermodynamics is used here. According to this law,

[tex]\Delta E=Q-W[/tex]

Q is heat and W is work done

Here,

Q = -12 J is the heat dissipated by the system

W = -28 J is the work done on the system

ATQ,

[tex]\Delta E=(-12)-(-28)\\\\=-12+28\\\\=16\ J[/tex]

So, the change of internal energy of the system is 16 J.

Answer:

194.81 revolutions

Explanation:

Given that,

Initial angular velocity, [tex]\omega_i=3700\ rpm[/tex]

Final angular velocity, [tex]\omega_f=1800\ rpm[/tex]

Time, t = 4.25 seconds

We need to find the number of revolutions occur during this time.

3700 rpm = 387.46 rad/s

1800 rpm = 188.49 rad/s

Let [tex]\alpha[/tex] is angular acceleration. Using first equation to find it.

[tex]\alpha =\dfrac{\omega_f-\omega_i}{t}\\\\\alpha =\dfrac{188.49 -387.463 }{4.25}\\\\\alpha =-46.81\ rad/s^2[/tex]

Now let us suppose that the number of revolutions are [tex]\theta[/tex].

[tex]\theta=\dfrac{\omega_f^2+\omega_i^2}{2\alpha}\\\\=\dfrac{188.49 ^2-387.463 ^2}{2\times -46.81}\\\\=1224.087\ rad[/tex]

or

[tex]\theta=\dfrac{1224.087}{2\pi}\\\\=194.81\ rev[/tex]

Hence, there are 194.81 revolutions.

Answer:

the reading of the balance must decrease

Explanation:

The balance of the span is within a fluid the air, for which it is subjected to the pressure of the same, if we write the equilibrium equation we have

          F_net = B -W - F_armosphere

in this case F_net = 540 N

where the thrust is given by Archimedes' principle which states that the thrust is equal to the weight of the fluid dislodged

          B = ρ g V

in this case the density of the air is

           ρ = 1.1 kg / m³

therefore the value of the thrust is small

the force of the air is

            P = F / A

            F = P A

the air pressure is approximately P = 1 10⁵ Pa

Thus

      B <F_atmosphere

Now we can analyze what happens when we remove the air from the room, the pressure at atmospheric pressure decreases therefore the force of the air decreases, while there is some air the thrust is maintained even when it also decreases since the density of the air decreases when decreasing the Pressure.

Consequently, the reading of the balance changes depending on how the thrust and the air force decreases, in general the air force decreases much faster than the thrust, therefore the reading of the balance must decrease

Answer:

11,627.91 kg/m^3

Explanation:

The computation of the density of the material is shown below

Given that

Mass , m = 1 kg

Height, H - 47 mm = 0.047 m

Diameter, d = 49 mm = 0.049 m

Now radius, r = D ÷ 2

= 0.049 ÷ 2

= 0.0245

Volume = πr^2h

= 3.14 × (0.0245)^2 × 0.047

= 0.000086m^3

Now the density of the material is

= mass ÷ volume

=  1÷  0.000086m^3

= 11,627.91 kg/m^3

Answer: 11,282.8 kg/m^3

Explanation:

We know:

Density = mass/volume

1 kg = mass

(π)(r^2)(h) = volume

Density = m/(πr^2h)

Plug in your values:

Density = 1kg/(π)(24.5 mm)^2(47 mm)

^we have to cut 49 (the diameter) in half because the equation calls for radius

Remember to multiply the density by 10^9 mm/ 1 m because the answer asks for kg/m^3

Answer:

The height of the ball when the speed of the ball is half of its initial value is 16.5 m

Explanation:

Given;

maximum height reached by the ball, h = 22 m

let the initial velocity of the = u

The equation of maximum height reached by the ball is calculated as;

v = u² - 2gh

where;

v is the final velocity at the maximum height = 0

0 = u² - (2 x 9.8)22

0 = u² - 431.2

u² = 431.2

u = √431.2

u = 20.765 m/s

Half of the initial speed = ¹/₂ x 20.765 m/s = 10.383 m/s

The height of the ball at this half value of speed is calculated as;

v² = u² - 2gh

where;

v is the final speed = 10.383 m/s

u is the initial speed = 20.765 m/s

(10.383)² = (20.765)² - (2 x 9.8)h

(2 x 9.8)h = (20.765)² - (10.383)²

19.6h = 323.379

h = 323.379 / 19.6

h = 16.5 m

Therefore, the height of the ball when the speed of the ball is half of its initial value is 16.5 m

Answer:

I think it's no. 3

Decrease the volume of the horizontal and vertical stabilizer material.

Explanation:

Lemme know if it's correct

Answer:

all of the above

Explanation:

um I do not know sorry

Explanation:

ummmmmmjjhfgfffff

Answer:

The total net momentum after the push is 0.

Explanation:

The total net momentum is given by:

[tex] p_{f} = p_{1_{f}} + p_{2_{f}} = m_{1}v_{1} + m_{2}v_{2} [/tex]

Where:

m₁: is the mass of 70 kg

m₂: is the mass of 60 kg

v₁: is the speed of 2.5 m/s

v₂:?

To find the final momentum first we need to find the speed v₂:

[tex]m_{1}v_{1} + m_{2}v_{2} = p_{i}[/tex]  

Where [tex]p_{i}[/tex] is the initial momentum = 0 (they are at rest)          

[tex] v_{2} = -\frac{m_{1}v_{1}}{m_{2}} = -\frac{70 kg*2.5 m/s}{60 kg} = -2.92 m/s [/tex]          

The minus sign is because the second person is moving in the opposite direction to the first person.

Now, the total net momentum is:

[tex] p_{f} = m_{1}v_{1} + m_{2}v_{2} = 70 kg*2.5 m/s + 60 kg*(-2.92 m/s) = 0 [/tex]

The final total momentum (after the push) should be zero because of momentum conservation.

Therefore, the total net momentum after the push is 0.

I hope it helps you!                

Explanation:

With the change in medium the speed of light wave travel changes. Therefore, the absolute refractive index changes. The speed of light is maximum is vacuum and changes with the change in medium. This is the refractive indices of different medium are different.

The refractive index is the characteristic of the wave that can not change as the wave enters the second medium.

The refractive index of a substance also known as the refraction index or index of refraction is a dimensionless quantity that specifies how quickly light passes through it in optics.

When the refractive index of a substance is increased, the speed of light in the material decreases.

The speed at which light waves travel changes as the medium changes. The absolute refractive index changes.

As a result, the speed of light is greatest in a vacuum and decreases as the medium changes. This is due to the fact that the refractive indices of various media are different.

Hence the refractive index is the characteristic of the wave that can not change as the wave enters the second medium.

To learn more about the refractive index refer to the link;

https://brainly.com/question/14592350

Answer:

6g/cm³

Explanation:

Given parameters;

Mass  = 600g

Dimension  = 2cm wide, 2cm tall and 25cm long

Unknown:

Density  = ?

Solution

Density is the mass per unit volume of any substance. To solve this problem:

   Density  = [tex]\frac{mass}{volume}[/tex]  

 Since mass = 600g

Let us find the volume;

    Volume  = length x width x height

   Volume  = 25cm x 2cm x 2cm  = 100cm³  

Therefore;

         Density  = [tex]\frac{600}{100}[/tex]    = 6g/cm³

Answer:

Inductive reactance is 50.00 ohms

Explanation:

Given the following data;

Voltage = 120v

Frequency = 60Hz

Current = 2.4 A

To find the inductive reactance;

Inductive reactance, XL = V/I

Where;

Substituting into the equation, we have;

XL = 120/2.4

XL = 50.00 ohms

Answer: that the object is negatively charged.

Explanation:

We know that the force between objects that have the same type of charge is a repulsive force, while for objects with an opposite charge, the force is attractive.

In this case, we know that we have an attractive force between an object and a positively charged rod.

Then the only conclusion we can take in this situation is that the object is negatively charged.

Answer:

The magnitude of the recoil velocity of the machine is 0.05  m/s.

Explanation:

Given;

mass of the baseball, m₁ = 0.101 kg

mass of the machine, m₂ = 67.1 kg

velocity of the baseball, v₁ = 32.6 m/s

let v₂ be the recoil velocity of the machine.

Apply the principle of conservation of linear momentum; the total momentum before and after firing the ball must be constant.

sum of the initial momentum of the ball and the machine = 0  (at rest)

sum of the final momentum of the ball and the machine = m₁v₁ + m₂v₂

Since total momentum is constant; m₁v₁ + m₂v₂ = 0

m₁v₁ + m₂v₂ = 0

(0.101 x 32.6) + (67.1)v₂ = 0

67.1v₂ = -3.2926

v₂ = (-3.2926) / 67.1

v₂ = -0.05  m/s (the negative sign shows that it is the opposite direction)

Thus, the magnitude of the recoil velocity of the machine is 0.05  m/s.

Hope this helps

Explanation:

All of the ways mentioned can be used to determine the mass of the box and pencils contained.

Answer:

D. violet

Explanation:

think of a UV light