a student proposes the following lewis structure for the hydrogen cyanide molecule. assign a formal charge to each atom in the student's lewis structure.

To determine the mass of air in the tank, we need to first find its absolute pressure and then use the Ideal Gas Law:

PV = nRT, where P is the absolute pressure, V is the volume, n is the number of moles, R is the universal gas constant, and T is the temperature in Kelvin.

First, let's convert the temperature to Kelvin: -93 + 273.15 = 180.15 K.

Next, we need to find the absolute pressure, which is the gage pressure plus the atmospheric pressure. In this case, the absolute pressure is 1.4 MPa + 1 atm = 2.4 MPa.

Now, we can plug in the values and solve for n:

2.4 MPa * 2 m^3 = n * 8.31 J/mol * 180.15 K

n = (2.4 MPa * 2 m^3) / (8.31 J/mol * 180.15 K)

Finally, we can use the molar mass of air (about 28.97 g/mol) to convert n to mass:

mass = n * molar mass = (2.4 MPa * 2 m^3) / (8.31 J/mol * 180.15 K) * 28.97 g/mol

Learn more about pressure here:

https://brainly.com/question/12971272

#SPJ4

The molar solubility of Lead (II) carbonate is 3.87 × 10⁻⁷.

Molar solubility (M) is defined as a unit of measurement for a compound's capacity to dissolve in a particular liquid, also known as a solvent. Molar solubility is generally measured in terms of moles/L since it is the most moles of a solute that can dissolve in one liter of solvent. The solution is known to be saturated when it can no longer dissolve any more solute and the number of moles dissolved in a liter of solvent equals the molar solubility.

The ionization equation for PbCO₃ is given as:

PbCO₃ → Pb²⁺ + CO₃²⁻

Ksp = [Pb²⁺][CO₃²⁻] = (Molar solubility)²

Given,

Ksp = 1.5 x 10⁻¹³

Molar solubility = √(Ksp)

⇒ Molar solubility = √(1.5×10⁻¹³)

⇒ Molar solubility = 3.87 × 10⁻⁷

Learn more about molar solubility from the link given below.

https://brainly.com/question/30022232

#SPJ4

Each statement refers to the following approaches:

Learn more about type of approach here: brainly.com/question/26241731

#SPJ4

The observed F2 data shown is a typical three point linkage mapping cross. The distance between the roof and vestigial genes can be calculated based on the map units shown in the "Expected" column.

The distance between two genes on a chromosome is proportional to the frequency at which recombination occurs between them. The expected map units for the cross cinnabar, roof, vestigial to wild type is 13.5 map units, while the expected map units for the cross cinnabar, vestigial to roof is 6.6 map units. Therefore, the distance between the roof and vestigial genes is 6.9 map units (13.5 - 6.6).

The map units, also known as centimorgans (cM), are a measure of the genetic distance between two loci on a chromosome. The higher the frequency of recombination between two loci, the greater the distance between them. In this three-point linkage mapping cross, the expected map units for the cross cinnabar, roof, vestigial to wild type is 13.5 cM, while the expected map units for the cross cinnabar, vestigial to roof is 6.6 cM. By subtracting the latter from the former, we get 6.9 cM as the distance between the roof and vestigial genes.

This distance represents the average frequency of recombination between the roof and vestigial genes in the F2 population. It also indicates that there is a low probability of recombination occurring between these two genes, meaning they are likely located close to each other on the same chromosome. This information can be useful in determining the chromosomal location of these genes and in understanding their potential functional relationships.

Find out more about Phenotype Observed Expected

brainly.com/question/20566036

#SPJ4

The mass of oxygen atoms in 12.3 g of Na2Cr2O7 is 5.27 g.

What is Sodium dichromate?

Sodium dichromate is the inorganic compound with the formula Na₂Cr₂O₇.

If the mass percent of oxygen in Na2Cr2O7 is 42.8%, then the mass of oxygen atoms in 100 g of Na2Cr2O7 would be 42.8 g.

To find the mass of oxygen atoms in 12.3 g of Na2Cr2O7.

we can simply multiply the mass of oxygen in 100 g of Na2Cr2O7 by 12.3 g and divide by 100 g:

Mass of oxygen in 12.3 g of Na2Cr2O7 = (42.8 g / 100 g) * 12.3 g

Mass of oxygen in 12.3 g of Na2Cr2O7 = 5.27 g

So the mass of oxygen atoms in 12.3 g of Na2Cr2O7 is 5.27 g

Learn more about Sodium dichromate here: brainly.com/question/22576453

#SPJ1

The correct option is A. Out of the following compound Ethanol (C2H5OH) exhibit hydrogen bonding because in ethanol H atom is directly attached with O atom.

Hydrogen bond formed when H atom is attached with any electronegative atom such as Oxygen or Nitrogen by sharing of electron that is by covalent bonding. In this case the difference in their electronegativity makes the covalent bond polar and make H atom partially positive. This partially positive H atom attracts an another partially negative atom of O which results in the electrostatic attraction between them which leads to H bonding. Presence of alcoholic group (OH) in ethanol is responsible for the H bonding. Highly electronegative elements such as Chlorine Cl, Fluorine F also exhibits Hydrogen bonding.

Learn more about H bonding here:

https://brainly.com/question/17659933

#SPJ4

A beaker and the sample it contains have a mass of 67. 832 g. If the

beaker has a mass of 32. 331 g, the mass of the sample will be 35.501 g

A material's mass is a measurement of how much matter is contained in that substance.

A balance is used to calculate the mass of a substance. By comparing the masses of two substances that contain an unknown amount of a specific ingredient, the unknown mass can be determined.

For instance, the following formula is used to determine the mass of a given substance sample:

Sample weight plus beaker weight = 75.652 g.

74.8 g is the weight of the beaker alone.

Sample mass is calculated as sample mass plus beaker mass minus beaker mass alone.

Sample mass: 67. 832 g - 32. 331 g = 35.501 g

Learn more about mass at: brainly.com/question/2537310

#SPJ4

Slaked lime is another name for the inorganic substance calcium hydroxide. If calcium oxide is combined with water, it forms a colorless crystal or even a white powder.

How well-versed are you in calcium?

The chemical element calcium (Ca) belongs to the Group 2 (Institute of internal auditors) of the chemical elements and is an alkaline-earth metal. It is the fifth most prevalent element in the Earth's crust and the most prevalent metallic element in human tissue. The 118 elements that make up the periodic table

What is the ideal calcium source?

The main food sources of calcium for Americans are milk, yogurt, and cheeses [1]. Calcium is abundant in these natural sources. Vegetable sources other than dairy include Chinese

To know more about calcium visit:

https://brainly.com/question/4023397

#SPJ4

Answer:

44.8 grams of O2

Explanation:

The balanced equation tells us that 5 moles of O2 are required for every 1 3 moles of CO2 produced.  This is a molar ratio of (5 moles O2)/(3 moles CO2).

Calculate the moles of CO2 in 37,15 grams of CO2:

The molar mass of CO2 is (12 + 2*16) = 44 grams/mole.

37.15 grams of CO2 is therefore ( 37.15 grams)/(44 grams/mole) = 0.84 mole of CO2.

Now use the molar ratio from above to calculate moles of O2 required:

   (0.84 mole CO2)*[(5 moles O2)/(3 moles CO2)] = 1.4 moles O2

Convert 1.4 moles O2 to grams O2 by multiplying by the molar mass of O2:  (1.4 moles O2)*(32 g/mole O2) = 44.8 grams of O2

Answer: 45.02    

thats what it is. Thats the answer. yep.

The matrix S represents covariance, whereas the matrix C represents correlation. Normalizing the covariance matrix with the standard deviations of each variable yields the correlation matrix.

(a) The square roots of the variances along S's diagonal can be used to compute a diagonal matrix D. The pieces along S's major diagonal provide the variances. Let's call the differences 12, 22, and 32. The diagonal matrix D is then: D = [σ1 0 0; 0 σ2 0; 0 0 σ3] (b) C = DSD' gives the correlation matrix C, where S is the covariance matrix and D is the diagonal matrix obtained in C's elements are supplied by: C = [σ1^2 0 0; 0 σ2^2 0; 0 0 σ3^2] * [s12 / (σ1 * σ2) s13 / (σ1 * σ3) s23 / (σ2 * σ3) [s12 / (σ1 * σ2) σ2^2 / (σ1^2) s23 / (σ2 * σ3)] [s13 / (σ1 * σ3) s23 / (σ2 * σ3) σ3^2 / (σ3^2)] As a consequence, the components of C are the standardized covariances between the variables, scaled by the product of their standard deviations, resulting in a correlation matrix with ones on the diagonal.

learn more about matrix  here:

https://brainly.com/question/28180105

#SPJ4

A solution of 5 millimoles of sodium chloride per litre is referred to as a 5 mM NaCl solution.

The unit for measuring solute concentration in biological solutions, the millimole (mM), is used to express this concentration. A certain quantity of sodium chloride must be weighed and dissolved in water to a final volume of one litre in order to create a 5 mM NaCl solution. To get the desired 5 mM concentration, the solution's concentration can be tested and altered as needed. The solution can be used as a control for research or to represent physiological salt concentrations in a variety of biological and biochemical applications.

learn more about solution at:

brainly.com/question/7932885

#SPJ4

Ammonia (NH3) is expected to be more chemically active than water (H2O) because of differences in the electronegativity of the central atoms.

When comparing atoms in the same periodic row, the more electronegative an atom is, the less it will want to donate an electron pair. The electronegativity of nitrogen (N) is higher than that of oxygen (O), making nitrogen less likely to donate an electron pair, and therefore making NH3 more basic than H2O. This is why ammonia is considered to be more chemically active than water.

Electronegativity is a measure of an atom's ability to attract electrons toward itself within a chemical bond. The electronegativity of an atom is determined by its atomic number and electron configuration. The more electronegative an atom is, the greater its ability to attract electrons toward itself.

Find out more about electronegativity

brainly.com/question/29849885

#SPJ4

In order to maintain the accuracy of results , the tool which  is most useful for measuring 12 milliliters of saltwater is graduated pipette.

Accuracy in terms of chemistry can be defined as to how close a measurement is to the true value.There are three types of accuracy:

1) Point accuracy-It means accuracy is present at that point of scale only.It does not give any information about the accuracy of the instrument.

2)Percentage of true value--It is the accuracy  which is determined by identifying accuracy of the instrument  and comparing it with the measured true value.

3)Percentage of scale range- It is the accuracy  which determines accuracy of the measurement.

Learn more about accuracy,here:

https://brainly.com/question/14244630

#SPJ1

Option (E) . F (Fluorine (F), the most reactive chemical element and the lightest member of the halogen elements, or group 17 (group VIIa) of the periodic table)

What is the fluorine used for?

Fluorine is important in the manufacture of core materials for nuclear power plants and for the insulation of utility poles. Hydrogen fluoride, which is a fluorine compound, is used to etch glass. Fluorine, like Teflon, is used in the manufacture of plastics and is also important for dental health.

Why is the fluorine toxic?

Fluoride is very potent and irritant tissues comes contact. Depending on the gas concentration at the time of exposure, it can cause injuries ranging from mild irritation to chemical burns. Very irritating to lungs, mucous membranes, skin and eyes.  

To know more about Fluorine visit here:

https://brainly.com/question/1940697

#SPJ1

In a covalent bond, the bond can be either polar or nonpolar.

Polar bonds occur when two atoms of different electronegativity bond together, creating a molecule with a positive and negative end. The more electronegative atom attracts the electrons closer to its nucleus, resulting in a partial negative charge, while the less electronegative atom has a partial positive charge. Examples of polar molecules include water and hydrogen chloride. Nonpolar bonds occur when two atoms of similar electronegativity bond together, creating a molecule without a positive or negative end. The electrons are evenly shared between the two atoms, resulting in a neutral molecule. Examples of nonpolar molecules include carbon dioxide and methane. The polarity of a bond determines the physical and chemical properties of a molecule, including its solubility and reactivity.

Learn more about bonds:

brainly.com/question/17405470

#SPJ4

This is an example of exclusivity. Option C

Exclusivity in hospitality refers to the provision of privileged or special treatment to guests, typically in high-end hotels or resorts. This can involve a range of services and amenities such as private rooms, VIP check-in, personalized attention from staff, access to exclusive areas, and high-end dining experiences.

The goal of exclusivity in hospitality is to provide guests with a luxurious, personalized, and memorable experience, differentiating it from more standard forms of hospitality.

Learn more about exclusivity:https://brainly.com/question/28578825

#SPJ1

Answer: Water

Explanation: In water, the hydrogen is bonded to an electronegative oxygen, and it can form hydrogen bonds. These are strong and thus keep the molecules together (molecules can not escape). Therefore, the compound with the lowest vapor pressure will be water.

The actual molecular mass of chlorine is 35.5 g/mol or 177.86×[tex]10^{-24}[/tex]g

What is molecular mass with example ?

The molecular mass, also known as molecular weight, refers to the total mass of all atoms in a molecule. It is expressed in atomic mass units (amu) or grams per mole (g/mol).

The molecular mass of a molecule is calculated by adding up the atomic masses of all the atoms in its molecular formula. For example, the molecular formula of water (H2O) is made up of two hydrogen atoms (atomic mass of 1 amu each) and one oxygen atom (atomic mass of 16 amu).

The molecular mass of water is therefore 18 amu or 18 g/mol. This information is useful in fields such as chemistry and biochemistry, where it is used to determine the properties of molecules and to predict how they will behave in reactions.

To learn more about molecular mass, visit: https://brainly.com/question/24191825

#SPJ4

Water pollution is the introduction of chemical or biological elements that degrade the quality of fresh or saltwater. Various factors, such as industrial waste, agricultural runoff, sewage discharge, and oil spills, can lead to water contamination.

These contaminants can damage aquatic life, destabilise ecosystems, and render water unfit for human consumption. Chemicals like heavy metals, nitrogen, and phosphorus, as well as germs and viruses, are a few examples of prevalent pollutants. Water pollution may have detrimental implications on both human and environmental health, ranging from the extinction of aquatic species to the development of waterborne infections. Many nations have created laws and policies targeted at minimising water pollution as a solution to the issue.

For such more question on Water pollution

https://brainly.com/question/1235358

#SPJ4

The empirical formula of given chloride of silicon is SiCl5 and its molecular formula is Si6Cl30

(a) The empirical formula of a compound represents the simplest whole number ratio of its constituent elements. To find the empirical formula of the chloride of silicon, we can use the percentage composition data.

First, convert the percentage composition of chlorine to grams:

79.1 g Cl / 100 g = 0.791 g Cl

Next, find the number of moles of chlorine:

0.791 g Cl / 35.5 g/mol = 0.022 mol Cl

Since the mass of the silicon is not specified, we can assume that the rest of the mass of the compound is silicon. To find the number of moles of silicon, we subtract the moles of chlorine from the total number of moles:

1.000 mol - 0.022 mol = 0.978 mol Si

Next, divide both the moles of chlorine and silicon by the smallest number of moles, to obtain the simplest whole-number ratio:

0.022 mol Cl / 0.022 mol Cl = 1

0.978 mol Si / 0.022 mol Cl = 44.5

Since 44.5 is not a whole number, we multiply both the moles of chlorine and silicon by the same factor to obtain whole numbers:

0.022 mol Cl * 5 = 0.11 mol Cl

0.978 mol Si * 5 = 4.89 mol Si

Finally, the empirical formula of the chloride of silicon is: SiCl5

(b) The molecular formula of a compound represents the actual number of atoms of each element in a molecule of the compound. To find the molecular formula of the chloride of silicon, we can use the molar mass and the empirical formula.

Given that the molar mass is 269 g/mol, we can calculate the number of empirical formula units in a molecule of the compound:

269 g/mol / (44 g/mol Si + 5 x 35.5 g/mol Cl) = 6

Therefore, the molecular formula of the chloride of silicon is:

SiCl5 x 6 = Si6Cl30

The molecular formula of the chloride of silicon is six times the empirical formula, SiCl5, with a molar mass of 269 g/mol.

To know more about empirical formula, click here : https://brainly.com/question/1439914

#SPJ4

Answer:

Compression and rarefactions carry sound waves through air molecules.

Explanation:

Combustion and synthesis are essentially opposites of one another. Single replacement and double replacement reactions are also opposites of one another.

Synthesis and single replacement reactions are not opposites of one another, but synthesis and decomposition reactions are opposites of one another.

There are several types of reactions, including synthesis reactions, decomposition reactions, single-replacement reactions, double-replacement reactions, combustion reactions, displacement reactions, photoactivation switch reactions, tyrosine ligation reactions, Guerbet-type reactions, and drug hypersensitivity reactions.

Learn more about type of reactions

https://brainly.com/question/29389498

#SPJ4

Chromium and copper are the two primary exceptions to electron configuration.

Because a fully or largely filled d sub-level is more stable than a partially filled d sub-level in these instances, an electron from the 4s orbital gets excited and climbs to the 3d orbital.

Exceptions are made because half-full or full shells or subshells are more stable than partially filled shells or subshells. When the energy level difference between two subshells is modest, an electron may move to the higher level shell to fully or partially fill it.

The valence electrons of transition metals are located in the d subshell. It is far more preferable (and stable) to have a shell that is either half full or completely full rather than somewhat filled.

Learn more about electron configuration

https://brainly.com/question/29157546

#SPJ4

The total gauge pressure at the bottom is 3,822 Pa.

The oil and water form two separate layers in the cylinder, with the oil floating on top of the water.

The volume of the oil can be calculated by subtracting the volume of water from the total volume of the liquid. If the total liquid depth is 40 cm and the water depth is 30 cm, then the oil depth is 40 cm - 30 cm = 10 cm.

The volume of the oil can be found by multiplying the height of the oil by the cross-sectional area of the cylinder. The cross-sectional area can be calculated using the formula π[tex]r^{2}[/tex], where r is the radius of the cylinder. The height and radius of the cylinder would need to be known in order to find the exact volume of the oil.

Learn more about gauge pressure:

brainly.com/question/29341536

#SPJ4

The pH of the solution is 2.55 and the concentrations of C₂H₅COOH and C₂H₅COO⁻ are 0.594 M and 0.00282 M respectively.

The following chemical equation describes how propanoic acid, a weak acid, will ionise in water.

C₂H₅COOH(aq) + H₂O(l) ↔ C₂H₅COO⁻(aq) + H₃O⁺(aq)

The concentration of the initial solution of propanoic acid is 0.597 M.

The Ka of propanoic acid is 1.34 × 10⁻⁵.

Let the concentration of each of the products is x.

Now, We have Ka = [C₂H₅COO⁻] [H₃O⁺] / [C₂H₅COOH] [H₂O]

or, 1.34 × 10⁻⁵ = x × x / 0.597

or, x² = 0.8 × 10⁻⁵

or, x = 2.82 × 10⁻³ M

or, x = 0.00282 M

So, concentration of C₂H₅COO⁻ = x = 0.00282 M

Concentration of C₂H₅COOH = 0.597 - 0.00282 = 0.594 M

Now, pH of solution = -log[H₃O⁺] = -log[x] = -log(0.00282) = 2.55

To know more about propanoic acid from the link

brainly.com/question/20318658

#SPJ4

Materials made of two or more substances that can be physically separated are homogeneous and heterogeneous.

The matter is something that exists by itself and continues to exist when conditions and properties change. The substance consists of two types, namely pure substances or elements and compounds and mixtures or homogeneous mixtures and heterogeneous mixtures.

Chemical changes cause a substance to appear with different types and properties from the original substance. Homogeneous and heterogeneous mixtures are substances that can be separated physically. the matter has mass and occupies space. Based on the shape, substances are classified into three types namely solid, liquid, and gas.

Learn more about pure substances and molecules here :

https://brainly.com/question/24462192

#SPJ4

The number of neutron in the nucleus will determine if one atom is a different element than the other.

The smallest unit of matter that may be split without producing electrically charged particles is the atom. It is also the smallest piece of substance with chemical element-like characteristics. As a result, the atom serves as the fundamental unit of chemistry.

Space makes up the majority of an atom. The remainder is made up of a cloud of negative electrons around a positive-charged nucleus made up of protons and neutrons. The number of neutron in the nucleus will determine if one atom is a different element than the other.

Therefore,  the number of neutron in the nucleus will determine if one atom is a different element than the other.

To learn more about atom, here:

https://brainly.com/question/29712157

#SPJ1

Every chemical reaction follows the law of conservation of masses. . Here, the number of oxygen gas is not balanced and does not support the claim. The given reaction can be balanced and will obey the mass conservation.

According to law of conservation of mass, the mass can neither be created nor be destroyed. Hence, the total mass of a system is conserved. For a chemical reaction, the total mass in the reactant side must be equal to the total mass in the product side.

Hence, no new atoms are created or no existing atoms are destroyed. Therefore, each element have to be equal in their number on both side of the reaction.

The given reaction can be balanced as follows:

[tex]\rm 2H_{2} + O_{2}\rightarrow 2H_{2}O[/tex]

Here, both the hydrogen and oxygen are equal in their number on both side and support the mass conservation.

Find more on mass conservation:

https://brainly.com/question/14549722

#SPJ1

Conservation of Mass Unit Test

1. Matter may be lost to or gained from the surroundings.

2. Yes, it supports the claim because the equation is balanced.

3. The bubbling indicates a gas was formed, so some atoms formed gas; therefore, mass was transferred to the atmosphere.

4. one-twelfth the mass of a neutral carbon atom.

5. Mass is conserved because the number of each atom in the reactants equals the number of each atom in the products.

6. 129.59 g/mol.

7. the number of atoms in the reactants.

8. 2Fe2O3

9. 112 g CaO and 88 g CO2

10. 274 g

11. For every 3 moles of carbon dioxide produced, 5 moles of oxygen react.

12. 96

13. 1.776 x 10^22

14. Short answer (don't plagiarize)

15. Short answer (please don't plagiarize)

16. Short answer (pretty please don't plagiarize)

The number of the moles of lithium are needed to completely react with 4.6 mol Br₂ is 9.2 mol.

The balanced chemical reaction is :

2Li  +  Br₂   ---->  2LiBr

The number of the moles of the = 4.6 mol

It is clear from the above balanced chemical equation that :

1 mole of the Br₂ react with the 2 mole of the Li

The moles of the Li = 2 × 4.6 moles of Li

The moles of the Li = 9.2 mol of the Li

The number of the moles = mass / molar mass

Thus, the number of the moles of the Li is 9.2 mol.

To learn more about moles here

https://brainly.com/question/26416088

#SPJ4