A stone is tossed vertically upward with an initial velocity of 25 ft/s from the top of a 30-ft building.(a)What is the height of the stone after 0.25 s

At the moment, there is actually no force that keeps the arrow going forward when it is in mid-flight.

In order to accelerate an object, there must be a net force acting on the object. This is because without any force acting on, an object will be at rest or moving at a constant rate and at one direction.

Acceleration in physics is defined to be the change in velocity over the time elapsed (a = Δv/t). The equation means that an object will be accelerating when it keeps changing velocities.

When the arrow is in mid-flight, it is assumed to be moving at a constant velocity, ignoring the air friction. Therefore, the arrow is not accelerating mid-flight, which means there is no force acting on the arrow at that moment.

Learn more about acceleration at https://brainly.com/question/460763.

#SPJ4

When object A exerts a force on object B, object B must exert an equal and opposite force on object A. This law essentially expresses a certain symmetry.

Forces always occur in pairs, and one body cannot exert a force on another without experiencing the force itself. Newton's third law of motion states that whenever a first object exerts a force on her second object, the first object experiences a force equal but opposite to the force it is exerting . Newton's third law of motion states that whenever the first object exerts a force on his second object, the first object experiences a force equal but opposite to the force it is exerting .

Learn more about Force

brainly.com/question/13014979

#SPJ4

We can conclude that the force exerted on each wand is repulsive, as the charges are both of the same sign.

Magnitude is a measure of the size of a physical quantity usually explain it as a numerical value of the octane used to compare the relative size of different object or phenomena it is typically used to measure the intensity soldiers trained the something magnitude is a concept applicable how many different physical quantities of the light sound and its speed and force.

The magnitude of the force exerted by each wand can be calculated using Coulomb’s Law, which states that the force is equal to the product of the two charges, divided by the square of the distance between them. Since we know the charge on the white-faced wand, we can calculate the force:

F = (1.38 x 10-10 C)2 / (1.35 cm x 10-2 m)2

F = 0.0012 N

The force between the two wands is repulsive, as the charges are both of the same sign.

Assuming that the wands are not charged before they are rubbed together and that the distance between them remains constant, we can conclude that the force exerted on each wand is repulsive, as the charges are both of the same sign.

To know more about magnitude click-
https://brainly.com/question/24256733
#SPJ4

In this case, there are 3 divisions if the switch is on direct current (DC), whereas there are 0 divisions if the switch is on alternating current (AC).

Electrical circuits that can transport different currents include those that use direct current (DC) and alternating current (AC).

Any combination of constant voltage, constant current, and resistors make up a DC electrical circuit.

An electrical circuit that is powered by an alternating source, which could be current or voltage, is known as an AC circuit.

In conclusion, if the switch is on direct current, there are 3 divisions, however if the switch is on alternating current, there are none.

Learn more about AC DC at brainly.com/question/2223691

#SPJ4

True. Checking the weights of a sample of bottles to decide if a process that fills bottles with soda is functioning properly is an example of inferential statistics.

Inferential statistics is a branch of statistics that involves using a sample of data to make inferences or conclusions about a larger population. In this case, the sample of bottles is used to make inferences about the entire process of filling bottles with soda, with the goal of determining if the process is functioning properly. This type of statistical analysis is used to make informed decisions and predictions about a population based on limited information, making it an important tool in many industries and fields.

Learn more about inferential statistics:

https://brainly.com/question/11215148

#SPJ4

A thermometer is included in the construction of a calorimeter to measure the temperature change that occurs during a chemical reaction.

A calorimeter is a device used to measure the heat transfer in a chemical reaction. This measurement is important because it allows scientists to determine the energy change that occurs during a reaction. The energy change can then be used to determine the energy transfer between the system and the surroundings, which is useful in studying thermodynamics.

A thermometer is included in the construction of a calorimeter to measure the temperature change that occurs during a chemical reaction. By measuring the initial and final temperature of the reaction, scientists can determine the energy transfer that has taken place. This is because energy transfer is directly proportional to the change in temperature.

In other words, as energy is transferred from one substance to another, the temperature of the substances will change. By measuring the temperature change, scientists can determine the energy transfer that has taken place. This information is then used to calculate the enthalpy change for the reaction, which is a measure of the energy transfer between the system and the surroundings.

To know more about thermometer here:

https://brainly.com/question/24189042#

#SPJ11

Star a is approximately 10 times brighter than star b.

The relationship between temperature and brightness of stars is complex and depends on various factors, including the size and composition of the star.

However, a rough estimate can be made using the Stefan-Boltzmann law, which states that the luminosity of a star is proportional to the fourth power of its surface temperature.

If star A is 3.2 times hotter than star B, its luminosity is proportional to the fourth power of 3.2, which is approximately 10. Thus, star A is approximately 10 times brighter than star B.

However, this estimate is a rough approximation and the actual brightness ratio can be different, depending on the specific stars in question and their properties.

To know more about  Stefan-Boltzmann law click on the link below:

https://brainly.com/question/13339566#

#SPJ11

Electron microscopes can obtain images with several hundredfold higher resolution than optical microscopes because of the short wavelength obtainable from a beam of electrons.

Electron microscopes differ from light microscopes in that they generate an image of a specimen using an electron beam rather than a light beam. Because electrons have a much shorter wavelength than visible light, electron microscopes can produce higher-resolution images than traditional light microscopes.
Thus, the resolution of an electron microscope for imaging cellular structure or proteins is theoretically limitless. Because of the objective lens system in electron microscopes, the resolution is practically limited to 0.1 nm.

Go through the given link below to know more about electron microscope:-

https://brainly.com/question/2845212

#SPJ4

The plate separation of such a capacitor is 1.186 nm or 11.86 Angstroms.

The question is not complete. A similar question is in the attachment. The formula for the capacitance of a parallel plate capacitor

C = ε₀ ×  A ÷ d

C = ε₀ ×  A ÷ d

C × d = ε₀ ×  A

91 × 10⁻¹⁵ × d = 8.85 × 10⁻¹² × 1.22 × 10⁻¹¹

91 × 10⁻¹⁵ × d = 10.797 × 10⁻²³

d = 10.797 × 10⁻²³ ÷ 91 × 10⁻¹⁵

d = 0.1186 × 10⁻⁸

d = 1.186 × 10⁻⁹

d = 1.186 nm

d = 11.86 × 10⁻¹⁰ m

d = 11.86 Angstroms

Learn more about capacitance here: https://brainly.com/question/27258294

#SPJ4

The nuclear power plant needs 95.217 kg of nuclear fuel or uranium 235 is used during the whole year to operate.

Here the nuclear power plant produces 1000MW of energy.

So, for one year the total energy that can be produced = 1000× 365× 24 = 8760000 MWh

Since the reactor has a 75% capacity, energy produced = 8760000×75/100 = 6750000 MWh. = 6.75×10⁹ kWh

Converting to joules = 6.75× 10⁹× 3.6× 10⁶ = 2.365×10¹⁶

Thermal efficiency is 33%. So, 2.365×10¹⁶ × 0.33

                                                 = 7.80×10¹⁵ J.

To find out the mass, we need to know the number of atoms. So converting the energy to meV.

7.80× 10¹⁵ × 6.242× 10¹² = 4.87 ×10²⁸ meV

From one atom 200 meV is produced.

So, number of atoms =  4.87 ×10²⁸/200 = 2.44×10²⁶ atoms.

No of moles = number of atoms/ Avogadro's number = 2.44×10²⁶/ 6.022 ×10²³ = 405.18 moles.

Mass = Number of moles× molar mass

        =405.18 × 235 = 95217.52 g = 95.217 Kg

So the amount of uranium 235 required by the nuclear reactor for an year is 95.217 g.

For more information regarding nuclear power plant, kindly refer

https://brainly.com/question/2285245

#SPJ4

Multiply the frequency by the conversion ratio is the formula to convert revolutions per minute (rpm) to radians per second (rad/s) .

What is radian ?

A radian is a unit of measurement used to represent angles in mathematics and physics. It is defined as the ratio of the length of an arc to the radius of the circle it encloses. One radian equals approximately 57.3 degrees. Radians are a more convenient and natural way to represent angles in certain math and physics applications.

Unlike degrees, which are divided into 360 equal parts, radians allow a continuous representation of angles that can be used to describe rotations in a more natural and intuitive way. For example, in trigonometry, the relationship between side lengths and angles in a right triangle can be more accurately and easily expressed using radians.

Radians are used in a variety of fields where describing rotations and angles is important, such as engineering, physics, and computer graphics.

To know more about radians , click the link below ;

https://brainly.com/question/1208741

#SPJ4

Answer:

The brightness of his flashbulbs temporarily saved him by blinding his would-be assassin.

We can use a log and arock or something hard to make a pivot and place on it the log to build a jump.

There are several exercises that can be done to increase the height of the jump.

The exercise to train the jump is by jumping jack. Jumping jacks is a type of exercise  plyometric that can help you jump higher by building lower body strength. This exercise can also increase the heart rate.

Jumping jacks are useful for improving performance in activities that require you to move quickly in different directions.

Learn more about build a jump at https://brainly.com/question/3047193.

#SPJ4

The following data can be converted to the engineering notation as the following. (a) 0.045 W is 45 mW. (b) 2000 pJ is 2nJ. (c) 0.1 ns is 100 pS (d) 39,212 as is 39.212 fs (e) 3 \Omega3Ω is 3Ω (f) 18,000 m is 18 km (g) 2,500,000,000,000 bits is 2.5 terabits (h)  0^{15} \text { atoms } / \mathrm{cm}^{3}10 15atoms /cm 3 is [tex]10^{21} \frac{atoms}{m^{3} }[/tex].

Engineering notation is the representation of expressing the numbers that are too big or too small and are represented in the decimal form times 10 raise to the power.  It is similar to the scientific notation but in engineering notation, the powers of ten are always multiples of 3.

Using scientific notation, one can express extremely big or extremely small values. When a number between 1 and 100 is used, it is written in scientific notation.

Learn more about engineering notation:

brainly.com/question/4953722

#SPJ4

[tex]a) 4.9X 10^{-7} Kg\\ b) 7.09X10^{-11} C[/tex]

We know that (from Newton’s third law) the magnitude of the force on the second particle due to the first particle [tex]F_{12}[/tex] equals the magnitude of the force on the first particle due to the second particle [tex]F_{21}[/tex] , so:

                            [tex]F_{12} = F_{21}[/tex]

Given:

The initial acceleration of the first particle, a1 = 7.0 m/s^2

The initial acceleration of the second particle, a2 = 9.0 m/s^2

Mass of the first particle, m1 = 6.3 * 10^(-7) kg

Separation between the two particles, d = 3.2 * 10^(-3) m

Using Coulomb's law, the force between two charges q1 and q2 is given by:

F = k * |q1 * q2| / d^2

Where k is Coulomb's constant.

Coulomb's law is a fundamental law of electrostatics that describes the interaction between charged particles. It states that the force between two point charges is proportional to the product of the magnitudes of the charges and inversely proportional to the square of the distance between them.

Since the acceleration of a particle is directly proportional to the net force acting on it, we can write:

m1 * a1 = k * |q1^2| / d^2

m2 * a2 = k * |q2^2| / d^2

Dividing the first equation by the second equation, we get:

m1 * a1 / m2 * a2 = q1^2 / q2^2

(m1 * a1) / (m2 * a2) = (q1^2) / (q2^2)

m2 = m1 * (a1 / a2)

Substituting the known values:

m2 = 6.3 * 10^(-7) kg * (7.0 m/s^2 / 9.0 m/s^2)

m2 = 4.9 * 10^(-7) kg

The mass of the second particle is 4.9 * 10^(-7) kg.

To find the magnitude of the charge of each particle, we can rearrange the first equation:

q1^2 = m1 * a1 * d^2 / k

Substituting the known values:

q1^2 = 6.3 * 10^(-7) kg * 7.0 m/s^2 * (3.2 * 10^(-3) m)^2 / k

q1 = sqrt(6.3 * 10^(-7) kg * 7.0 m/s^2 * (3.2 * 10^(-3) m)^2 / k

=> q1 = q2 = 7.09 × 10^-11 C

Therefore, the correct answers are:

[tex]a) 4.9X 10^{-7} Kg\\ b) 7.09X10^{-11} C[/tex]

To know more about Coulomb's law refer to:

brainly.com/question/506926

#SPJ4

As a result, when an ultrasonic wave goes from muscle to bone, roughly 53.29% of it is reflected.

Ultrasound refers to sound waves with frequencies greater than the human hearing's highest audible limit. In terms of physical qualities, ultrasound is identical to "regular" sound, except that humans cannot hear it. This limit varies from person to person, but in healthy young individuals it is around 20 kilohertz.

Here,

So, we can first calculate the acoustic impedance of the muscle and bone:

Z1 = ρ1 * c1 = 1.06 × 10^3 kg/m^3 * 1540 m/s = 1.62 × 10^6 kg/m^2s

Z2 = ρ2 * c2 = 1.89 × 10^3 kg/m^3 * 1540 m/s = 2.88 × 10^6 kg/m^2s

And then use these values to calculate the reflection coefficient:

R = (Z2 - Z1) / (Z2 + Z1) = (2.88 × 10^6 kg/m^2s - 1.62 × 10^6 kg/m^2s) / (2.88 × 10^6 kg/m^2s + 1.62 × 10^6 kg/m^2s) = 0.73

The percentage of the ultrasound wave that is reflected can be calculated as the square of the reflection coefficient:

Reflection Percentage = R^2 * 100% = 0.73^2 * 100% = 53.29%

So, approximately 53.29% of the ultrasound wave is reflected when it passes from muscle into bone.

To know more about ultrasound wave,

https://brainly.com/question/14694921

#SPJ4

If a test charge is substituted for the fixed charge with one that has twice as much charge, the test charge will experience the following electric forces: Double A.

The definition of "force" is obvious. It is quite fair to use the phrases "push" or "pull" to describe a force at this level. An object simply does not "have in it" or "contain" a power.

When pushed or pulled, a massed object will alter its velocity. A body's resting state can be changed by an outside force.

To know more about Force visit:

brainly.com/question/13191643

#SPJ4

The angle at which William Tell must aim the arrow is approximately 32.2 degrees.

To find the angle at which William Tell must aim the arrow to hit the apple, you need to use the equation of motion for a projectile under constant gravitational acceleration.

Let's call the angle at which William aims the arrow "θ". Then, the horizontal velocity of the arrow (vx) can be found using vx = 35 m/s x cos(θ). The vertical velocity of the arrow (vy) can be found using vy = 35 m/s x sin(θ).

Using the kinematic equation for vertical motion under constant acceleration, we can find the time it takes for the arrow to reach the height of the apple:

vy = v0 + a x t

0 = 35 m/s x sin(θ) - 9.8 m/s² x t

t = (35 m/s x sin(θ)) / 9.8 m/s²

Next, use the horizontal velocity of the arrow and the time found above to find the horizontal distance it travels:

x = vx x t

x = 35 m/s x cos(θ) x (35 m/s x sin(θ)) / 9.8 m/s²

Finally, set x equal to the distance to the apple (27 m) and solve for θ using trigonometry:

27 m = 35 m/s x cos(θ) x (35 m/s x sin(θ)) / 9.8 m/s²

cos(θ) = sqrt(9.8 m/s² x 27 m / (35 m/s)²)

θ = arc cos(sqrt(9.8 m/s² x 27 m / (35 m/s)²))

The angle at which William Tell must aim the arrow is approximately 32.2 degrees.

Learn more about projectile angle  at : https://brainly.com/question/12945459

#SPJ4

Frictionless ramp: The acceleration of a box sliding down a frictionless ramp inclined at 30 degrees can be determined using the equation for gravitational acceleration:

a = g * sin(θ)

where a is the acceleration, g is the acceleration due to gravity (9.8 m/s^2), and θ is the angle of the ramp (30 degrees).

a = 9.8 * sin(30) = 4.9 m/s^2

Ramp with friction: If the coefficient of friction between the box and ramp is 0.34, the acceleration can be determined using the equation:

a = g * sin(θ) - μ * g * cos(θ)

where μ is the coefficient of friction.

a = 9.8 * sin(30) - 0.34 * 9.8 * cos(30) = 2.86 m/s^2

So the acceleration of the box sliding down a frictionless ramp inclined at 30 degrees is 4.9 m/s^2, and the acceleration if the coefficient of friction is 0.34 is 2.86 m/s^2.

The angular acceleration of the big wheel would be 0.59 rad/s².

The linear speed of a point on the circumference of a wheel can be related to its angular velocity (ω) by the equation v = ωr, where r is the radius of the wheel.

The angular acceleration (α) of the wheel can be found using the equation α = Δω/Δt, where Δω is the change in angular velocity and Δt is the time interval over which the change occurs.

In this scenario, the linear speed of the big wheel is given as 5.0 m/s and its radius is 0.50 m. Therefore, the initial angular velocity of the wheel is ω = v/r = 5.0 m/s / 0.50 m = 10 rad/s. The time interval over which the speed increases is given as 8.5 s.

The final angular velocity can be calculated using the equation ωf = ωi + αt, where ωi is the initial angular velocity and t is the time interval.

Substituting the known values into the equation for angular acceleration, we get α = (ωf - ωi) / t = (10 - 0) / 8.5 s = 1.18 rad/s².

To know more about  angular acceleration click on the link below:

https://brainly.com/question/29428475#

#SPJ11

According to the question,They have different components and are not the same vectors.

A component is a building block or part of a system that is necessary for the system to function. Components are often interchangeable and can be interlinked with other components to create a complex system. Components can be physical or virtual, and are used in a wide variety of fields, including electronics, engineering, manufacturing, software development, and architecture. Examples of components include individual parts of a car, like the engine, brakes, transmission, and suspension; or components of a computer, such as CPU, RAM, motherboard, and hard drive.

Vector B⃗ has components (2, 3) and vector D⃗ has components (4, -1). Since the components are different, the vectors are not the same.

To learn more about components

https://brainly.com/question/3214758

#SPJ4

The initial rate if the initial concentrations of NO and [tex]O^{2}[/tex] were both 0.16 M is 0.12288 m/s.

The initial concentrations of nitrous oxide and chlorine, which are both reactants, are both 0.16 M, and the rate constant is stated as 3 mol[tex]L^{-} s^-[/tex]. In this problem, the initial rate constant is necessary. The rate is given in units of k NO2*Cl2. The initial rate is 0.12288 when both components are changed to 0.16.

The initial rates method, which involves measuring the initial reaction rate at various beginning reactant concentrations, can be used to estimate the rate law for a chemical reaction. To establish the reaction order for that specific reagent, one of the reagent concentrations is increased while the other is maintained constant.

To know more about rate law, refer:

https://brainly.com/question/14481050

#SPJ4

Complete question is:

What is the initial rate when the initial concentrations of both reactants are 0.16M ? The initial rates listed in the following table were determined for the reaction 2NO(g)+Cl2(g)→2NOCl(g) Experiment Initial [NO] Initial [Cl2] Cl2 consumption rate (initial) 1 0.13 0.20 1.0×10^−2 2 0.26 0.20 4.0×10^−2 3 0.13 0.10 5.0x10^-3 rate=k[NO]^2[Cl_2] value of rate constant is k=3.0 /M L^1 s^1

The 299,792,458 m/s is the speed of light with a frequency of 2.4 x 1013 1/s.

What is speed ?

The rate of a directionally changing object's location. The SI unit of speed is created by combining the fundamental units of length and time. Meters per second (m/s) is the unit of speed in the metric system.

What is frequency?

The frequency is expressed in Hertz. A sound wave's frequency is determined by how many vibrations it produces ( f ). Another way to think of frequency is as the quantity of waves that pass a specific spot in a second.

Therefore,  299,792,458 m/s is the speed of light with a frequency of 2.4 x 1013 1/s.

Learn more about speed from the given link.

https://brainly.com/question/27888149

#SPJ4

The work done is 6000J  

The product of a force's component acting in the displacement's direction and its magnitude is known as the work done by the force. Formula.

The following formula can be used to determine work by multiplying force and distance in the direction of the force. Unit: W = F d.

Given

Output work formula

L*Ld = 680*8 = 5440

Hence the output is 5440J  

Input work  

We know  

the input work formula is  

E*Ed

500*12= 6000J  

Read more about work done here:

https://brainly.com/question/8119756

#SPJ1

The figure shows the electric field lines for two point charges separated by a small distance. Determine the ratio is [tex]-\frac{1}{3}[/tex].

The directions that a positive test charge would accelerate if it were placed along the electric field lines are indicated by the lines. Because of this, the lines are pointed in the direction of negatively charged source charges rather than positively charged source charges. Each line must have an arrowhead pointing in the proper direction to convey information about the field's direction. Any number of lines could be present in an electric field line pattern. The number of lines is typically regulated because drawing so many lines tends to make the patterns harder to read. Usually, a few lines around a charge are enough to convey the characteristics of the electric field in the area around the lines.

Field lines emerges from positive charge and go inside negative charge.

[tex]\frac{q_{1} }{q_{2} }[/tex]=[tex]\frac{-6}{18} =-\frac{1}{3}[/tex]

Learn more about electric field lines

brainly.com/question/3405913

#SPJ4

The highest volume of water is displaced by the lead block and aluminum, which also has the largest volume and the strongest buoyant force.

Here are a few real-world instances of the buoyant force. A ship floating in the ocean, a boat moving down a river, an iceberg floating in the water, a person wearing a life jacket floating in the water, a helium balloon rising in the air, etc. The density has a direct relationship with the buoyant force.

An object feels a buoyant force because the bottom is deeper in the liquid than the top, which results in a stronger upward pressure. As a result, any item submerged in a liquid experiences buoyancy.

To know more about buoyant force visit:-

https://brainly.com/question/21990136

#SPJ4

No, the normal force exerted on the book by the inclined plane and the weight force exerted on the book by the earth are not equal in magnitude.

The normal force acts perpendicularly to the inclined plane, while the weight force is a downward force. Since they are not in the same direction, their magnitudes cannot be determined.

The magnitude of the normal force is determined by the angle of the inclined plane. Since the normal force acts perpendicularly to the inclined plane, it can be calculated by finding the cosine of the angle of the inclined plane multiplied by the weight of the object.

For example, if the inclined plane has an angle of 30°, the normal force would be cos(30°) times the weight of the object. On the other hand, the weight force is determined by the gravitational force, which is a constant and always acts in the downward direction. Thus, the magnitude of the weight force is always equal to the weight of the object.

Learn more about The magnitude of the normal force:

https://brainly.com/question/28834706

#SPJ4

The momentum of the 0.230-kg baseball thrown with a speed of 41 m/s is 9.53 kg m/s. This means that if the ball were to collide with an object with equal and opposite momentum, the combined momentum of the two objects would be zero.

Momentum is a measure of an object's motion and is calculated by multiplying its mass and velocity. In physics, it is an important concept as it is conserved in many cases and helps to predict how objects will interact with each other.

The momentum of an object can be calculated using the formula: p = mv, where p is momentum, m is the mass of the object, and v is its velocity. In this case, the mass of the baseball is 0.230 kg, and its velocity is 41 m/s. Therefore, the momentum of the baseball can be calculated as follows:

p = mv = 0.230 kg * 41 m/s = 9.53 kg m/s.

Here you can learn more about The momentum

https://brainly.com/question/17662202?referrer=searchResults#

#SPJ11