Answer: The number of moles of gas which are present in the sample are 1.49 mol.
Explanation:
Given: Volume = 55.3 L
Temperature = [tex]23.3^{o}C[/tex] = (23.3 + 273) K = 296.3 K
Pressure = 0.658 atm
Formula used is as follows.
PV = nRT
where,
P = pressure
V = volume
n = no. of moles
R = gas constant = 0.0821 L atm/mol K
T = temperature
Substitute the values into above formula as follows.
[tex]PV = nRT\\0.658 atm \times 55.3 L = n \times 0.0821 L atm/mol K \times 296.3 K\\n = \frac{0.658 atm \times 55.3 L}{0.0821 L atm/mol K \times 296.3 K}\\= \frac{36.3874}{24.32623}\\= 1.49 mol[/tex]
Thus, we can conclude that the number of moles of gas which are present in the sample are 1.49 mol.
Detects radio waves from objects in space:
a) Radio Telescopes
b) Reflection Telescope
c) Compound telescope
d) Refraction telescope
Answer:
The correct answer is A
Explanation:
A radio telescope is used to detect, collect and focus radio waves from distant objects in the sky or space. While a compound telescope, by design, can both refract and reflect waves. A reflection telescope uses curved mirrors to reflect light to form an image. A refraction telescope forms an image using a lens as its objective.
From the above definitions, it can be deduced that option A is the correct answer.
What type of molecule is 3-hexyne?
The type of molecule in which 3-hexyne is grouped under is referred to an alkyne.
What is Alkyne?This is an organic compound which has a triple bond. It falls under the group of hydrocarbons present on earth.
They are usually represented with the suffix -yne which is why 3-hexyne falls under such category.
Read more about Alkyne here https://brainly.com/question/22933069
#SPJ1
Summarize your findings in a short report of 150 words. Include your hypothesis, observations, data, calculations, and conclusion. The answers to the questions below should be included in your conclusion.
Why didn't the box slide off the table before you put enough coins in the bag?
What was the coefficient for the smooth surface? For the rough surface?
What was the difference between the two coefficients? What caused this difference?
What factors caused a margin for human error in this investigation?
Would the coefficient vary if you tied the string to a similar object of different masses, but on the same surface? Explain.
What did you learn from this investigation? Be thoughtful in your answer.
Answer:
Follow these steps.
1. Fill the matchbox with pebbles. Weigh the matchbox with the pebbles inside. Record that weight.
2. Tie the string to the box. Allow the string to hang over the edge of the table.
3. Tie the other end of the string to a corner of the plastic bag, leaving an opening to put in coins.
4. Add coins one by one until the box is pulled off the table.
5. Count and record the number of coins and the weight of the bag with the coins in it.
6. Lay the round sticks on the table about 1 inch apart and about 2 inches from the edge of the table.
7. Put the matchbox on the rollers farthest from the edge of the table.
8. Now add coins one by one to the bag until the box is pulled off the table.
9. Count and record the number of coins and the weight of the bag with the coins in it.
10. Repeat the experiment. Determine your margin of error if your results vary. For accuracy, repeat the experiment if desired.
11. Using the equation for the coefficient of friction in the text above, determine the coefficient of friction for the matchbox in each experiment. Include this data in your summary.
Explanation:
I think this is useful
please make me as breainlest
Answer:Follow these steps.
1. Fill the matchbox with pebbles. Weigh the matchbox with the pebbles inside. Record that weight.
2. Tie the string to the box. Allow the string to hang over the edge of the table.
3. Tie the other end of the string to a corner of the plastic bag, leaving an opening to put in coins.
4. Add coins one by one until the box is pulled off the table.
5. Count and record the number of coins and the weight of the bag with the coins in it.
6. Lay the round sticks on the table about 1 inch apart and about 2 inches from the edge of the table.
7. Put the matchbox on the rollers farthest from the edge of the table.
8. Now add coins one by one to the bag until the box is pulled off the table.
9. Count and record the number of coins and the weight of the bag with the coins in it.
10. Repeat the experiment. Determine your margin of error if your results vary. For accuracy, repeat the experiment if desired.
11. Using the equation for the coefficient of friction in the text above, determine the coefficient of friction for the matchbox in each experiment. Include this data in your summary.
Explanation:
what is a chemical name for the compound with the formula Na2s? (sodium (na) has one valance electron and sulfur (s) has 7 valence electrons.)
a: sulfur sodate
b: sulfur bisulfate
c: sodium sulfate
d: sodium sulfide
Answer: sodium sulfide
What is the colour of Copper sulphate solution
Answer:
blue
Explanation:
304 cm x m and 67kg to gram please helpppp!!!!!!!!
Answer:
[tex]304cm = 3.04m \\ 67kg = 67000g[/tex]
Explanation:
[tex]100cm \: = 1m \\ 304cm = x \\ use \: \: cross \: multipication \\ 100x = 304 \\ \frac{100x}{100} = \frac{304}{100} \\ x = 3.04m[/tex]
-------------------------------------------------
[tex]1kg = 1000g \\ 67kg = x \\ \\ use \: cross \: \: multipication \\ 1x = 67 \times 1000 \\ x = 67000g[/tex]
Hope this helps
Have a nice day!
Which factor decide the reactivity of alkyl halide?
Answer:
The reactivity order reflects both the strength of the C-X bond and the stability of X(-) as a leaving group and leads to the general conclusion that alkyl iodides are the most reactive members of this functional class
Why phenol is more acidic than alcohol?
Answer:
Phenol is more acidic than cyclohexanol and acyclic alcohols because the phenoxide ion is more stable than the alkoxide ion. ... But in a phenoxide ion, the negative charge is delocalized over the benzene ring. Phenoxide ion is therefore resonance stabilized.
Answer:
Phenol is more acidic than cyclohexanol and acyclic alcohols because the phenoxide ion is more stable than the alkoxide ion. ... But in a phenoxide ion, the negative charge is delocalized over the benzene ring. Phenoxide ion is therefore resonance stabilized.
Explanation:
Please Mark me brainlist
Cl2 + 2NO --> 2NOCI
What mass of NOCI will be produced if 2.58 X 10^22 molecules of CI2 react?
Answer:
Explanation:
Find the answer below
How many grams are in 562 dg?
56.2 g
56,200 g
5.620 g
5.62 g
Answer:
56.2
Explanation:
mark me as BRAINLIEST
follow me
carry on learning
100 %sure
please i need help ……
Answer:
H2
Explanation:
(l) means liquid
(s) means solid
(g) means gaseous
I hope this helped [:
At 40km up in the atmosphere the pressure is 3.8 kPa. I release a balloon with a volume of 30.0
liters from sea level. The balloon ascends up into to atmosphere 40 km. What will be the new
volume of the balloon, assuming no change in temperature?
Answer in liters
The values used in the scale of pH and pOH are derived from a system designed by ______.
Curie
Gordonsen
Dalton
Sorenson
The element copper has 29 protons. What is the atomic number of copper?
Answer:
29
Explanation:
since protons are a constant and unique characteristic of an element it's considered as he atomic number of that element.
Can someone please solve this for me and explain it
83.3% yield
Explanation:
First, we need to convert 240 g of [tex]Fe_{2}O_{3}[/tex] into moles:
[tex]240 \:g \:Fe_{2}O_{3} \:\times(\frac{1\:\text{mol}\:Fe_{2}O_{3}}{159.69\: \text {g}\:Fe_{2}O_{3}})[/tex]
[tex]=1.50 \:\text{mol}\:Fe_{2}O_{3}[/tex]
Next, find the theoretical Fe yield using molar ratios.
[tex]1.50 \: \text {mol} \: Fe_{2}O_{3}\: \times (\frac{2\: \text{mol} \: Fe}{1 \:\text{mol} \: Fe_{2}O_{3}})[/tex]
[tex] = 3.00 \: \text{mol} \: Fe[/tex]
Then convert this back into grams:
[tex]3.00 \: \text{mol} \:Fe \times (\frac{55.845 \: \text{g} \: Fe}{1 \: \text{mol} \: Fe}) = 168 \: \text{g} \: Fe[/tex]
Note that actual yield is only 140 g Fe so percentage yield is
[tex]\dfrac{140\:\text{g}\:Fe}{168\:\text{g}\:Fe} \times 100[/tex]%= 83.3%
83.3%
The answer is 83.3%
BRAINILIEST PLEASEWhat is the y-intercept of the function f(x) = -x+ ?
2 름
The points on the y-intercepts are (0,y) whereas the point on the x-intercept are (x,0). Here the y-intercept of the function f(x) = -x + 2 is 2.
What is y-intercept?When the line touches the y-axis, we can say that these are y-intercepts. The y-intercept can be found out when x = 0. This represents the point at which the graph crosses through the y-axis. The y-intercept can also be referred as y-value.
In order to find the intercepts of any function, we must find the coordinates of the point where the function intersects the x and y axis. This can also be done by equating the independent or dependent variable value as 0 and then finding out the other value.
Here the given function is:
f(x) = -x + 2
When we put x = 0, then
f(x) = -0 + 2 = 2
Thus the y-intercept is 2.
To know more about y-intercept, visit;
https://brainly.com/question/14180189
#SPJ7
Pu-238 (Plutonium, 238) decays by α emission to form an atom, which atom is this?
Answer:
Helium atom
Explanation:
For the RTGs flown by the United States, the radioisotope has been some chemical form of plutonium-238 (238Pu or Pu-238). Plutonium-238 decays primarily by the emission of an alpha particle (a helium atom without its electrons).
What is the percent by mass of chlorine CI in NaCI to 3 significat digits please help
Answer:
60.7%
Explanation:
Molar mass of NaCl = 23 +35.5
= 58.5 g/mol
Molar mass of Cl = 35.5 g/mol
Percentage by mass of Cl =?
The percentage by mass of Cl in NaCl can be obtained as shown below'
Percentage by mass = mass of element / mass of the compound × 100
Percentage by mass of Cl
= 35.5 / 58.5 × 100
= 3550 / 58.5
= 60.7%
Therefore, the percentage by mass of Cl in NaCl is 60.7%