A refrigerator draws 4.5 A of current while operating on a 120-V power line. If the refrigerator runs 50% of the time and electric power costs $0.15/kWh, how much does it cost to run this refrigerator for a 30-day month

Answer: geothermal

Explanation:

The geothermal energy source has no greenhouse gas emissions or health impacts on humans.

Geothermal energy can be described as the thermal energy in the Earth's crust which arises from the formation of the planet and from the radioactive decay of materials.

The high temperature in Earth's interior cause rock to melt and solid mantle to behave plastically. The mantle convects upward since it is lighter than the surrounding rock. Temperatures at the core-mantle boundary reach over 4000 °C.

Geothermal heating can use water from hot springs and geothermal power means the generation of electricity from geothermal energy, which has gained importance.

Earth's geothermal resources are more than adequate to supply humanity's energy needs, although a small fraction is currently being profitably exploited, commonly in areas near tectonic plate boundaries.

The greenhouse gas emissions of geothermal stations are on average 45 g of CO₂ per kWh of electricity or less than 5% of that of conventional coal-fired plants.

Learn more about Geothermal energy, here:

https://brainly.com/question/22354034

#SPJ2

Answer:

Explanation:

The mass of the object can be found by using the formula

[tex]m = \frac{f}{a} \\ [/tex]

f is the force

a is the acceleration

From the question we have

[tex]m = \frac{25}{2} \\ [/tex]

We have the final answer as

Hope this helps you

Answer:

Explanation:

The acceleration of an object given it's mass and the force acting on it can be found by using the formula

[tex]a = \frac{f}{m} \\ [/tex]

f is the force

m is the mass

From the question we have

[tex]a = \frac{100}{85} = \frac{20}{17} \\ = 1.176470...[/tex]

We have the final answer as

Hope this helps you

Answer:

Explanation:

In thermodynamics, an adiabatic process is a type of thermodynamic process which occurs without transferring heat or mass between the system and its surroundings.Unlike an isothermal process, an adiabatic process transfers energy to the surroundings only as work. It also conceptually supports the theory used to explain the first law of thermodynamics and is therefore a key thermodynamic concept.

The system takes in heat but does not release it. If an adiabatic process is reversible, there is no change in entropy; otherwise, there is a rise in entropy, or degree of disorder.

What is adiabatic process?

A thermodynamic process known as an adiabatic process takes place when there is no exchange of mass or heat between the system and its surroundings.

An adiabatic process only transfers energy to the environment as work, in contrast to an isothermal process.

The system's overall heat remains constant since there is no heat exchange with the environment.

It is a fundamental idea in thermodynamics and theoretically supports the theory that underlies the first law of thermodynamics.

Therefore, no heat flow in and out of system, which is a characteristic of an adiabatic process.

Learn more about adiabatic process here:

https://brainly.com/question/11938296

#SPJ6

Answer:

Magnitude of the induced emf is 11.62 V

Explanation:

Given:

No. of turns of the circular coil, N=185

Radius, R=4.50 cm=0.045 m

No. of turns of solenoid per meter(m), n=350

a=12.5 A

b=2.10 [tex]s^{-1}[/tex]

Now,

To determine the emf induced in the coil at t = 1.50 s:

The given equation is:

[tex]I=a(1-e^{-bt})[/tex]

Now,

[tex]B=\mu_{o}nI=\mu_{o}na(1-e^{-bt})[/tex]

[tex]\frac{dB}{dt}=\mu_{o}nabe^{-bt}[/tex]

Now, substituting the respective values:

[tex]\frac{dB}{dt}=-4\pi\times 10^{-7}\times 350\times 12.5\times 2.10e^{-2.10\times 1.50}[/tex]

[tex]\frac{dB}{dt}=0.988\ T/s[/tex]

Now,

[tex]emf=NA\frac{dB}{dt}[/tex]

where,

A=Area=[tex]\pi R^{2}[/tex]

Thus,

[tex]emf=185\times \pi\times (4.50\times 10^{-2})^{2}\times 11.545e^{-3.15}[/tex]

[tex]emf=11.62 V[/tex]

Answer:

25.08m/s

Explanation:

mgh1 + 0.5mv1² = mgh2 + 0.5mv2²

h1 = 0m

v1 = u

h2 = 5m

v2 = 23m/s

putting the values into the formula above;

m(10)(0) + 0.5m(u²) = m(10)(5) + 0.5m(23²)

0 + 0.5mu² = 50m + 264.5m

0.5mu² = 314.5m

dividing through by m

0.5u² = 314.5

u² = 629

u = 25.08m/s

Therefore, the initial speed "u" = 25m/s

Answer:

ok

  ukjh

Explanation:

Answer:

okay

Answer:

a pro to single parent house holds is no favorite parent and a chance to have a better bond with your child a con could be money trouble or jealousy of others with to parents. a pro to same sex couples could be the children could learn to be accepting of others and their differences a con could be the children might be bullied by trashy homophobes at their school and other places for have same sex parents.  i did both so you could chose

Answer:

HBr- polar covalent

Cl2 - nonpolar covalent

H2O - polar covalent

Explanation:

Covalent bonds are chemical bonds that holds atoms of elements in such a way that electrons are shared between the atoms. However, based on the electronegativity differences between elements, compounds can either be polar covalent or nonpolar covalent.

Polar covalent bonds are formed when electrons are unevenly shared between two atoms based on difference in their electronegativities i.e. the more electronegative atom pulls more of the electrons. For example, in the case of HBr and H2O, Bromine and Oxygen atoms are more electronegative, hence, they pull more electrons making the electron sharing unequal, hence, a POLAR COVALENT BOND forms.

Non polar covalent bonds, contrarily, occurs when electrons are shared equally or evenly. This is so because the atoms of the elements involved have the same electronegativity. For example, Cl2 contains two atoms of Chlorine (Cl), which has the same electronegativity, hence, electrons between the two atoms are shared equally to form a NONPOLAR COVALENT BOND

HBr is polar covalent, Cl₂ - nonpolar covalent and H₂O is polar covalent in nature.

When atoms with differing electronegativities share electrons in a covalent link, the result is a polar covalent bond.

Consider the molecule of hydrogen chloride (HCl). In order to generate an inert gas electron configuration, each atom in HCl requires one extra electron.

Covalent bonds are chemical bonds that keep atoms of different elements together while sharing electrons.

Compounds can be polar covalent or nonpolar covalent depending on the electronegativity variations between components.

When electrons are unevenly divided between two atoms due to differences in their electronegativities, polar covalent connections are created.

The more electronegative atom draws more electrons. In the case of HBr and H2O, for example, the Bromine and Oxygen atoms are more electronegative,

Therefore they draw more electrons, causing the electron sharing to be uneven, resulting in the formation of a polar covalent bond.

Hence HBr is polar covalent, Cl₂ - nonpolar covalent and H₂O is polar covalent in nature.

To learn more about the polar covalent bond refer to the link;

https://brainly.com/question/10777799

Answer: With no friction, the box will accelerate down the ramp

Explanation:

Answer:

2.72 m/s

Explanation:

In 3 meters a person running 0.5 m/s accelerates 1.2 m/s².

It means,

Distance, s = 3 m

Initial velocity, u = 0.5 m/s

Acceleration, a = 1.2 m/s²

We need to find the final velocity of the person. Using equation of motion to find it as follows :

[tex]v^2-u^2=2as\\\\v^2=2as+u^2\\\\v^2=2\times 1.2\times 3+(0.5)^2\\\\v=2.72\ m/s[/tex]

So, the final velocity of the person is 2.72 m/s.

Answer:

Explanation:

coefficient of kinetic friction of wooden floor μ = .4

force of friction = μ R , R is reaction force of floor

R = mg = weight of body

R = 25 N

force of friction = .4 x 25 = 10 N

Net force on the crate = 10 - 10 = zero .

Net force on the body will be nil.

Answer:

Even though CFL are more expensive, they tend to last longer. Research proves that CFL uses 1/4 to 1/3 the same amount of energy to produce the same lighting as an incandescent light bulb (source: enhso.com)

Answer:

Planks, barbell rollouts, and swiss ball pikes

Explanation:

Answer:

r = 4.62 cm

Explanation:

Mass of a coffee, m = 370 g

Height of the mug, h = 5.5 cm

We need to find the inside radius of the mug. Density of an object is equal to the mass per unit volume. It can be given by :

[tex]d=\dfrac{m}{V}\\\\d=\dfrac{m}{\pi r^2 h}\\\\r=\sqrt{\dfrac{m}{\pi dh}}\\\\r=\sqrt{\dfrac{370\ g}{\pi \times 1\ g/cm^3\times 5.5\ cm}}\\\\r=4.62\ cm[/tex]

So, the inside radius is 4.62 cm.

Answer:

can u buy me a giftcard ill have this done in no time

Explanation:

Answer:

(a) The final angular speed is 12.05 rad/s

(b) The time taken to turn 5.5 revolutions is 5.74 s

Explanation:

Given;

number of revolutions, θ = 5.5 revolutions

acceleration of the wheel, α = 20 rpm/s

number of revolutions in radian is given as;

θ = 5.5 x 2π = 34.562 rad

angular acceleration in rad/s² is given as;

[tex]\alpha = \frac{20 \ rev}{min} *\frac{1}{s} *(\frac{2\pi \ rad}{1 \ rev } *\frac{1 \ min}{60 \ s}) \\\\\alpha = 2.1 \ rad/s^2[/tex]

(a)

The final angular speed is given as;

[tex]\omega _f^2 = \omega_i ^2 + 2\alpha \theta\\\\\omega _f^2 = 0 + 2\alpha \theta\\\\\omega _f^2 = 2\alpha \theta\\\\\omega _f = \sqrt{2\alpha \theta}\\\\ \omega _f = \sqrt{2(2.1) (34.562)}\\\\ \omega _f = 12.05 \ rad/s[/tex]

(b) the time taken to turn 5.5 revolutions is given as

[tex]\omega _f = \omega _i + \alpha t\\\\12.05 = 0 + 2.1t\\\\t = \frac{12.05}{2.1} \\\\t = 5.74 \ s[/tex]

Answer:

Work Function = 3.53 x 10⁻¹⁹ J = 2.2 eV

Explanation:

The work function of the metal metal can be found as follows:

Energy of Photon = Work Function + K.E

hc/λ = Work Function + K.E

Work Function = hc/λ - K.E

where,

h = Plank's Constant = 6.625 x 10⁻³⁴ J.s

c = speed of light  = 3 x 10⁸ m/s

λ = wavelength of photons = 240 nm = 2.4 x 10⁻⁷ m

K.E = Maximum Kinetic Energy = (2.97 eV)(1.6 x 10⁻¹⁹ J/1 eV) =  4.752 x 10⁻¹⁹ J

Therefore,

Work Function = (6.625 x 10⁻³⁴ J.s)(3 x 10⁸ m/s)/(2.4 x 10⁻⁷ m) - 4.752 x 10⁻¹⁹ J

Work Function = 8.281 x 10⁻¹⁹ J - 4.752 x 10⁻¹⁹ J

Work Function = 3.53 x 10⁻¹⁹ J = 2.2 eV

Answer:

220

Explanation:

5500 divided by 25 is 220

Answer:

it's easy the answer is 500 just multiple 500 times 25 and you will get 5500

Answer:

Hey, wanna pair our account on Brainly so we can share the perks? https://brainly.com/invite/a88a52bd8e2ff3030b43b9056dfb032b?utm_source=invite&utm_medium=link&utm_campaign=bfp_parental_feed&utm_term

Explanation:

Hey, wanna pair our account on Brainly so we can share the perks? https://brainly.com/invite/a88a52bd8e2ff3030b43b9056dfb032b?utm_source=invite&utm_medium=link&utm_campaign=bfp_parental_feed&utm_term=parent

Answer:

♡ madeline here ♡

heres your answer

This force of gravitational attraction

is depending on the masses of both

objects and contrarily corresponding

to the square of the distance that divided

their middle parts. This means that as you

move away from an object the gravitational

force lowers. i hope i could help you! ☆

have a great day!

- madeline/madi ✧･ﾟ: *✧･ﾟ:･ﾟ✧*:･ﾟ✧･ﾟ

Explanation:

Answer:

The gravitational potential energy of the ball is 13.23 J.

Explanation:

Given;

mass of the ball, m = 0.5 kg

height of the shelf, h = 2.7 m

The gravitational potential energy is given by;

P.E = mgh

where;

m is mass of the ball

g is acceleration due to gravity = 9.8 m/s²

h is height of the ball

Substitute the givens and solve for gravitational potential energy;

PE = (0.5 x 9.8 x 2.7)

P.E = 13.23 J

Therefore, the gravitational potential energy of the ball is 13.23 J.

Answer:

free fall is any motion of a body where gravity is the only force acting upon it. In the context of general relativity, where gravitation is reduced to a space-time curvature, a body in free fall has no force acting on it

Explanation:

hope this helped

Answer:A freefall is what you experience when you go skydiving and that is because you are falling out of the sky

Explanation:

Answer:

it is caused by gases in earths atmosphere. it warms up earhs surface and lower atmosphere.

Explanation:

from what i know, these seem like the only ones that apply.

Answer:

a

 [tex]k = 457333.3 N/m[/tex]

b

[tex]x_a =0.09\ m[/tex]      

Explanation:

From the question we are told that

    The total mass of  three people is  [tex]M = 2.00*10^{2} \ kg[/tex]

     The mass of the car is  [tex]m_c = 1.200 *10^{3} \ kg[/tex]

     The compression of the car spring is  [tex]x = 3 \ cm = 0.03 \ m[/tex]

Generally the spring constant is mathematically represented as

          [tex]k = \frac{F}{x}[/tex]

Here F is the force exerted by the mass of three people and that of the car , this is mathematically represented as        

=>       [tex]F = (M +m_c) *g[/tex]

=>       [tex]F = ([2.0*10^{2} ]+[ 1.200*10^{3}]) * 9.8[/tex]

=>       [tex]F = 13720 \ N[/tex]

So

        [tex]k = \frac{13720}{0.03}[/tex]

=>     [tex]k = 457333.3 N/m[/tex]

Generally if the mass which the car is loaded with is  [tex]m = 3.00*10^{2} \ kg[/tex]

Then the force experienced by the spring is  

         =>       [tex]F_a = (m +m_c) *g[/tex]

         =>       [tex]F_a = (3.00*10^{3} + 1.200 *10^{3}) * 9.8[/tex]

         =>       [tex]F_a = 41160 \ N[/tex]

Generally from the above formula the compression is  

       [tex]x_a = \frac{F_a}{k}[/tex]

=>    [tex]x_a = \frac{41160}{457333.3}[/tex]

=>    [tex]x_a =0.09\ m[/tex]      

Answer:

Explanation:

The kinetic energy of an object can be found by using the formula

[tex]KE = \frac{1}{2} m {v}^{2} \\ [/tex]

m is the mass

v is the velocity

From the question we have

[tex]KE = \frac{1}{2} \times 2 \times {5}^{2} \\ = 1 \times {5}^{2} [/tex]

We have the final answer as

Hope this helps you

Answer:

Q = 7272 Kilojoules.

Explanation:

Given the following data;

Mass = 2.0*101kg = 202kg

Initial temperature, T1 = 10°C

Final temperature, T2 = 90°C

We know that the specific heat capacity of iron = 450J/kg°C

*To find the quantity of heat*

Heat capacity is given by the formula;

[tex] Q = mcdt[/tex]

Where;

dt = T2 - T1

dt = 90 - 10

dt = 80°C

Substituting the values into the equation, we have;

[tex] Q = 202*450*80[/tex]

Q = 7272KJ or 7272000 Joules.