A rectangular pyramid has a volume of 525 cubic feet. It has a base of 25 feet by 18 feet. Find the height of the pyramid.

Volume of a Pyramid: V=1/3Bh

What is the height of the pyramid in cubic feet?

Answers

Answer 1
The volume of the rectangular pyramid is given as 525 cubic feet, and the base of the pyramid is 25 feet by 18 feet.

We know that the formula for the volume of a pyramid is given as:

V = (1/3)Bh

where V is the volume, B is the area of the base, and h is the height of the pyramid.

So, substituting the given values, we have:

525 = (1/3)(25*18)h

Multiplying both sides by 3, we get:

1575 = 450h

Dividing both sides by 450, we get:

h = 1575/450

Simplifying this, we get:

h = 3.5

Therefore, the height of the pyramid is 3.5 feet.
Answer 2

Answer: The height is 3.5 cubic feet

Step-by-step explanation:

We have to find the area of the base first so multiply 25 and 18 feet together. You will get 450

Now you can make an equation.

525 = (1/3)*450*h

Multiply the 1/3 and the 450 together to get 150

Your equation is now 525 = 150h

Divide 150 on both sides to isolate h

You now have 3.5 = h


Related Questions

The strength of magnetic force varies inversely with the square of the distance between the magnets.
Suppose that when two magnets are 0.06 meters apart, there is a force of 4 newtons. Find the work, in joules, that is required to move the magnets from a distance of 0.03 meters apart to a distance of 0.1 meters apart. (1 Joule = 1 Newton * 1 meter). Round your answer to three (or more) decimal places.

Answers

We can start by using the formula for inverse square law: F = k/d^2. where F is the force, d is the distance between the magnets, and k is a constant.

We can use the given information to solve for k: 4 = k/0.06^2, k = 4 * 0.06^2, k = 0.0144

Now we can use the value of k to find the force when the magnets are 0.03 meters and 0.1 meters apart: F1 = 0.0144/0.03^2 = 16, F2 = 0.0144/0.1^2 = 0.144

The work required to move the magnets is equal to the change in potential energy between the initial and final positions.

We can use the work-energy principle, which states that the work done on an object is equal to its change in kinetic energy plus its change in potential energy. Since the magnets are not moving, their kinetic energy is constant, so the work done on them is equal to their change in potential energy: W = Uf - Ui

where W is the work, Uf is the final potential energy, and Ui is the initial potential energy. The potential energy of the magnets is given by: U = -k/d

where k is the constant we found earlier and d is the distance between the magnets.

Therefore, the initial potential energy is: Ui = -0.0144/0.03 = -0.48

And the final potential energy is: Uf = -0.0144/0.1 = -0.144

So the work required to move the magnets is: W = -0.144 - (-0.48) = 0.336 Joules

Therefore, the work required to move the magnets from 0.03 meters apart to 0.1 meters apart is 0.336 Joules (rounded to three decimal places).

You can read more about the magnetic force at https://brainly.com/question/2279150

#SPJ4

Consider the following equation.

6y=48
Step 1 of 2 : Find the x- and y-intercepts, if possible.

Answers

Answer:

X= NONE

Y=8

Step-by-step explanation:

Divide both sides by the same factor to get y alone

6y=48

So you divide 6y divided by 6 equals 48 divided by 6

Then you cancel the terms that are in both the numerator and denominator.

So 6 divided by 6 cancels out because 6 divided by 6 is 1, leaving you with the 1y or just Y they are the same thing so now you have the Y you are trying to find.

So now Y=48 divided by 6 and if you punch that into your calculator it should give you 8 so Y=8

Use the figures below to evaluate the indicated derivative, or state that it does not exist. If the derivative does not exist, enter dne in the answer blank. The graph to the left (in black) gives f(x), while the graph to the right gives g(x) (which is constant for values of x greater than 80). f(x) g(x) ddxf(g(x))|x=60= (If the derivative does not exist, enter dne.)

Answers

[tex]\frac{d}{dx}f(g(x)) |_{x=60}[/tex]  = Derivative does not exist.

What is a function?

function contains input and output.

It describes the relationships between them.

Example:

f(x) = 2x + 1

f(1) = 2 + 1 = 3

f(2) = 2 x 2 + 1 = 4 + 1 = 5

The outputs of the functions are 3 and 5

The inputs of the function are 1 and 2.

We have,

The graph of f(x) and g)(x) is given,

We see that g(x) at 60 is increasing.

And f(x) at 60 is decreasing.

So,

[tex]\frac{d}{dx}f(g(x)) |_{x=60}[/tex]  does not exist.

Thus,

[tex]\frac{d}{dx}f(g(x)) |_{x=60}[/tex]  = dne

Learn more about functions here:

https://brainly.com/question/28533782

#SPJ9

Help me with this worksheet please

Answers

Answer:

its so tiny

Step-by-step explanation:

show a closer picture

PLEASE HELPPPPPPPPPP

Answers

46+67=113
180-113
x=67

negative distances and velocities could mean in this situation.

Answers

The negative is a direction going -5 on the x axis we still went five in distance.

What is the velocity?

The direction of a body or object's movement is defined by its velocity. In its basic form, speed is a scalar quantity. In essence, velocity is a vector quantity. It is the speed at which distance changes. It is the displacement change rate.

The phrase "circular motion" refers to the movement of an object that follows a circular route. We all understand that an item moving in a circle has a constant velocity since it does not fluctuate.

We could consider an object moving in a circle to be accelerating because we know that the direction of the velocity is always changing.

A tugboat reportedly travelled 1.5 miles in 0.3 hours. Hence, its speed is -5 miles per hour.

Thus, the velocity is negative as can be seen here. it displays the direction.

Learn more about velocity here:

brainly.com/question/2562955

#SPJ9

Question
Which statement is true about the relationship between the amount of plant food remaining and the number of days?
O This relationship is not a function because more than one amount of plant food remains each day.
• This relationship iS function because more than one amount of plant food remains each day.
This relationship is not a function because only one amount of plant food remains each day.
This relationship
is a function because only one amount of plant food remains each day.

Answers

Answer:

This is a function because only one amount of plant food remain each day.

Step-by-step explanation:

A function is a relation where every input has only one output.

A relations is a set of ordered pairs like:

(1,5) (2,4) (3,3) (4,2)

Your input is the days and your output is the amount of food.  Each day the food is going down.  Each day would have a unique amount of food.

If a 0.5 liter solution of bichloride contains 1 gram of bichloride, then 250 mL will contain how many grams of bichloride?

Answers

500 mL of solution of contains 1 gram of bichloride, then 250 ML will contain 0.5 gram of bichloride.

Write a function that models the data.
j k
0 3
5 28
10 53
15 78
20 103
k=[

Answers

The equation of line is y = 5x + 3 , where the slope is m = 5

What is an Equation of a line?

The equation of a line is expressed as y = mx + b where m is the slope and b is the y-intercept

And y - y₁ = m ( x - x₁ )

y = y-coordinate of second point

y₁ = y-coordinate of point one

m = slope

x = x-coordinate of second point

x₁ = x-coordinate of point one

The slope m = ( y₂ - y₁ ) / ( x₂ - x₁ )

Given data ,

Let the equation of line be represented as A

Now , the value of A is

Let the first point be P ( 0 , 3 )

Let the second point be Q ( 5 , 28 )

Now , the slope of the line is m = ( y₂ - y₁ ) / ( x₂ - x₁ )

Substituting the values in the equation , we get

Slope m = ( 28 - 3 ) / ( 5 - 0 )

Slope m = 25 / 5 = 5

Now , the equation of line is y - y₁ = m ( x - x₁ )

Substituting the values in the equation , we get

y - 3 = 5 ( x - 0 )

On simplifying the equation , we get

y - 3 = 5x

Adding 3 on both sides of the equation ,  we get

y = 5x + 3

Hence , the equation of line is y = 5x + 3

To learn more about equation of line click :

https://brainly.com/question/14200719

#SPJ1

When the standard deviation is not known, mean control chart upper and lower control limits are computed by adding and subtracting ______ from the grand mean

Answers

Answer:

A2 x average range

Step-by-step explanation:

We will now perform cross-validation on a simulated data set. (a) Generate a simulated data set as follows: > set.seed (1) > x-rnorm (100) y-x-2x-2+rnorm (100) In this data set, what is n and what is p? Write out the model used to generate the data in equation form. (b) Create a scatterplot of X against Y. Comment on what you find. (c) Set a random seed, and then compute the LOOCV errors that result from fitting the following four models using least squares: Note you may find it helpful to use the data.frameO function to create a single data set containing both X and Y Are your results the same as what you got in (c)? Why? this whuat you expected? Explain your aniswer. (d) Repeat (c) using another random seed, and report your results. (e) Which of the models in (c) had the smallest LOOCV error? Is

Answers

a. n is 100 and p = 2 when we generate the simulated data set.

b. By generating a scatterplot we found a quadratic function. Y from -9 to 3 and x from -2 to 2.

c. Yes the result is the same as we got in question c.

d. Report of d is exactly the same because LOOCV will be the same since it evaluates n folds of a single observation.

e. The quadratic model and yes I expected that because the true data is of a quadratic form.

a. Generate a simulated data set.

set.seed(1)

Y <- rnorm(100)

X <- rnorm(100)

Y <- X - 2 × X² + rnorm(100)

n=100, p=2.

y=x−2x2+ϵ,ϵ∼N(0,1)

b. Create a scatterplot of X against Y . Comment on what you find.

ggplot(data.table(X=X, Y=Y), aes(x=X,y=Y)) + geom_point()

We can see a clear quadratic function. Y from -9 to 3 and x from -2 to 2.

c. Set a random seed, and then compute the LOOCV errors that result from fitting the following four models using least squares:

dt = data.table(X, Y)

# i

glm.fit1 <- glm(Y ~ X)

cv.glm(dt, glm.fit1)$delta

## [1] 5.890979 5.888812

# ii

glm.fit2 <- glm(Y ~ poly(X,2))

cv.glm(dt, glm.fit2)$delta

## [1] 1.086596 1.086326

# iii

glm.fit3 <- glm(Y ~ poly(X,3))

cv.glm(dt, glm.fit3)$delta

## [1] 1.102585 1.102227

# iv

glm.fit4 <- glm(Y ~ poly(X,4))

cv.glm(dt, glm.fit4)$delta

## [1] 1.114772 1.114334

d. Repeat (c) using another random seed, and report your results. Are your results the same as what you got in (c)? Why?

dt = data.table(X, Y)

set.seed(2)

# i

glm.fit1 <- glm(Y ~ X)

cv.glm(dt, glm.fit1)$delta

## [1] 5.890979 5.888812

# ii

glm.fit2 <- glm(Y ~ poly(X,2))

cv.glm(dt, glm.fit2)$delta

## [1] 1.086596 1.086326

# iii

glm.fit3 <- glm(Y ~ poly(X,3))

cv.glm(dt, glm.fit3)$delta

## [1] 1.102585 1.102227

# iv

glm.fit4 <- glm(Y ~ poly(X,4))

cv.glm(dt, glm.fit4)$delta

## [1] 1.114772 1.114334

Exact the same, because LOOCV will be the same since it evaluates n folds of a single observation.

e. The quadratic model and yes I expected that because the true data is of a quadratic form.

Learn more about cross-validation at

https://brainly.com/question/30508081

#SPJ4

For the following situation, find the mean and standard deviation of the population. List all samples (with replacement) of the given size from that population. Find the mean and
standard deviation of the sampling distribution and compare them with the mean and standard deviation of the population.
The number of DVDs rented by each of three families in the past month is 2, 11, and 5. Use a sample size of 2

Answers

The correct comparison of the population and sampling distribution is A. Means are the same but the standard deviation of sampling distribution is smaller

How to find the mean and standard deviation

X X^2

95 9025

96 9216

98 9604

Sum = 289 27845

n 3

The sample mean 96.33333333 SUM/n

Population mean 96.33333333 SUM/n

Sample standard dev [tex]1.527525232 \sqrt{((1/(n-1))(SUM(X^2)-(1/n)SUM(X)^2)}[/tex]

Population standard dev [tex]1.247219129 \sqrt{((1/n)(SUM(X^2)-(1/n)SUM(X)^2)}[/tex]

Population Mean(μ) = 96.33

Population standard deviation (σ) = 1.25

Option A) 95,96,98 and X bar = 96.33

Sampling distribution :

mean (μx = μ) = 96.33

standard deviation(σx = σ/SQRT(n)) = 1.25/SQRT(3) = 0.72

Option A) Means are the same but the standard deviation of the sampling distribution is smaller

Read more about standard deviation here:

https://brainly.com/question/24298037

#SPJ1

Find the midpoint (M) between points A and B if A = (4, 0, 2) and B = (-3, 0, 9)

Answers

Answer:

Step-by-step explanation:

Midpoint of A(x1,y1,z1) and B(x2,y2,z2) is

(x1+x2/2,y1+y2/2,z1+z2/3)

(x1,y1,z1) = (4, 0, 2)

(x2,y2,z2)=(-3, 0, 9)

Midpoint = (4+(-3)/2,0+0/2,9+2/2)=(1/2,0,11/2)

14 tires is% of 250 tires.
(Type a whole number or decimal rounded to the nearest tenth

Answers

The complete statement is 14 tires is 5.6% of 250 tires.

How to complete the blanks

From the question, we have the following parameters that can be used in our computation:

14 tires is% of 250 tires.

As an equation, we have

14 = x% * 250

Divide both sides of the equation by 250

So, we have the following representation

x% = 14/250

Evaluate

x% = 0.056

Multiply by 100

x = 5.6

Hence, the expression in the blank is 5.6

Read mroe about percentage at

https://brainly.com/question/28398580

#SPJ1

Suppose that in a certain metropolitan area, 90% of all households have cable TV. Let x denote the number among four randomly selected households
that have cable TV. Then x is a binomial random variable with n = 4 and p = 0.90. (Round your answers to four decimal places.)

(a) Calculate p(3)=P(x = 3).

Interpret this probability.
a) the probability that more than three of the four randomly selected households have cable TV
b) the probability that at most three of the four randomly selected households have cable TV
c) the probability that at least three of the four randomly selected households have cable TV
d) the probability that less than three of the foor randomly selected households have cable TV
e) the probability that exactly three of the four randomly selected households have cable TV


(b) Calculate p(4), the probability that all four selected households have cable TV.

(c) Calculate P(x ≤ 3).

Answers

a) The probability P(X = 3) = 0.2916 represents the probability that exactly three of the four randomly selected households have cable TV.

b) The probability that all four selected households have cable TV is: 0.6561

c) P(x ≤ 3) = 0.9477

How to solve binomial probability distribution problems?

The binomial probability is the probability of exactly x successes on n repeated trials, with p probability. The formula is:

P(X = x) = ⁿCₓ * pˣ * (1 - p)^(n - x)

where:

n = the number of trials.

x = number of times a particular outcome is attained.

p = probability of success.

a) We are given to calculate p(X = 3).

p = 0.90

n = 4

Thus:

P(X = 3) = ⁴C₃ * 0.9³ * (1 - 0.9)⁴⁻³

= 0.2916

This represents the probability that exactly three of the four randomly selected households have cable TV.

b) The probability p(4) is:

P(X = 4) = ⁴C₄ * 0.9⁴ * (1 - 0.9)⁴⁻⁴

= 0.6561

c) P(x ≤ 3)= P(X = 0) + P(X = 1) + P(X = 2) + P(X = 3)

= 0.9477

Read more about Binomial Probability Distribution Problems at: https://brainly.com/question/15246027

#SPJ1

2. The total rainfall in Los Angeles was 18.82" for winter 2018 and 14.86" for winter 2019. What was the percent decrease from 2018 to 2019?​

Answers

Answer:

decrease by 21.04%

Step-by-step explanation:

18.82" - 14.86" = 3.96

percentage = 3.96/18.82

= 0.21041445271(100)

=21.04%

Which statement is true
about the function f(x)= V-=x?
The domain of the
graph is all real numbers.
The range of the graph IS all real numbers.
The domain of the graph is all real numbers less than or
equal to 0.
The range of the graph is all real numbers less than or equal to 0.

Answers

The correct statement regarding the function [tex]f(x) = \sqrt{-x}[/tex] is given as follows:

The domain of the graph is all real numbers less than or equal to zero.

How to find the domain and the range of a function?

The domain of a function is the set that contains all the values assumed by the input of the function.The range of a function is the set that contains all the values assumed by the output of the function.

For the square root function, the inside term cannot be negative, hence -x >= 0 -> x <= 0, meaning that the domain of the graph is all real numbers less than or equal to zero.

The square root assumes values of zero or greater, hence the range is of y >= 0.

More can be learned about domain and range of functions at https://brainly.com/question/30348593

#SPJ1

Finding the derivative of a function at a point x gives
A.) The slope of the secant line of the function at x
B.) A line parallel to the function
C.) The slope of the tangent line of the function at x
D.)None of the above

Answers

Answer:

C.)

Step-by-step explanation:

that is exactly the definition of the derivative.

the derivative is the limit of

(f(x+h) - f(x))/((x+h) - x) = (f(x+h) - f(x))/h

with h going to 0.

this is the limit of the standard rate of change concentrated on a single point = the slope of the tangent at that point.

The region between the graphs of y = x2 and y = 2x is rotated around the line y = 4. Find the volume of the resulting solid.

Answers

The region between the graphs of y = x2 and y = 2x is rotated around the line y = 4. The volume of the resulting solid is 31π/15 cubic units.

To find the volume of the resulting solid, we can use the method of cylindrical shells. First, we need to determine the limits of integration.

The graphs of y = x^2 and y = 2x intersect at x = 0 and x = 2. Therefore, we will integrate with respect to x from 0 to 2.

The distance between the line y = 4 and the graph y = x^2 is 4 - x^2, and the distance between the line y = 4 and the graph y = 2x is 4 - 2x. Thus, the radius of the cylindrical shell at x is (4 - x^2) - (4 - 2x) = 2x - x^2.

The height of the cylindrical shell at x is the difference between the y-coordinates of the two graphs at x, which is (2x) - (x^2) = x(2 - x).

Therefore, the volume of the resulting solid is:

V = [tex]\int\limits^2_0 \, 2\pi(x(2 - x))(2x - x^2) dx[/tex]

= [tex]\int\limits^2_0 \, 4\pi x^3 - 2\pi x^4 - 2\pi x^2 + \pi x^3 dx[/tex]

= [tex]\int\limits^2_0 \, 5\pi x^3 - 2\pi x^4 - 2\pi x^2 dx[/tex]

= π(5/4 - 2/5 - 2/3)

= 31π/15

To learn more about volume click on,

https://brainly.com/question/17515923

#SPJ4

For the following sample of n=10 scores: 2, 3, 4 , 4, 5, 5, 5, 6, 6, 7
a. Assume that the scores are measurements of a discrete variable and fine the median.
b. Assume that the scores are measurements of a continuous variable and find the median by locating the precise midpoint of the distribution.

Answers

The scores are measurements of a discrete variable is 10 and the median is 5.  The scores are measurements of a continuous variable is 10 and the median by locating the precise midpoint of the distribution is 5.

To find the median of a set of data, we first need to put the data in order.

2, 3, 4, 4, 5, 5, 5, 6, 6, 7

The median is the middle value when the data is in order. Since there are 10 scores, the middle two scores are the 5th and 6th scores, which are both 5. Therefore, the median is 5.

To find the median of a continuous variable, we also need to put the data in order, but this time we treat the scores as if they are measurements on a continuous scale.

2, 3, 4, 4, 5, 5, 5, 6, 6, 7

Next, we locate the precise midpoint of the distribution. Since there are 10 scores, the midpoint falls between the 5th and 6th scores. The 5th score is 5 and the 6th score is also 5. Therefore, the midpoint is (5+5)/2 = 5.

So, the median is 5 when we treat the scores as measurements on a continuous scale.

To know more about Median:

https://brainly.com/question/21969448

#SPJ4

What is the solution of the system of equations?
4x - 3y = 15
x+y = 2
Enter your answer in the boxes.

Answers

Answer:

x = 3, y = -1

Step-by-step explanation:

4x - 3y = 15

x + y = 2 -> y = 2 - x

4x - 3(2 - x) = 15

4x - 6 + 3x = 15

7x = 21

x = 3

y = 2 - x

y = 2 -3

y = -1

Answer: x =3, y = -1

Step-by-step explanation:

[tex]\bf{\underline{We\:solve\:by\:applying\:the\:reduction\:method.}}[/tex]

          [tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{The\:exercise\:is \ ---\to \ \left \{ {{4x-3y=15} \atop {x+y=2 \ \ \ \ \ }} \right. } \end{gathered}$}}[/tex]

Multiply the second equation by -4, then add both equations.

  4x - 3y = 15

  -4(x + y = 2)

We add these equations to eliminate x.

    -7y = 7

Then we solve -7y = 7 for y. (We divide by 7)

        [tex]\bf{\dfrac{-7y}{ -7}=\dfrac{7}{-7} } \\ \\ \bf{y=-1}[/tex]

We place the found value of y , in one of the original equations y in order to solve for x:

        4x - 3y = 15

        4x - 3(-1) = 15

        3x + 4 = 15

We add (-3) to both sides.

     4x + 3 + (-3) = 15 + (-3)

      4x = 12

We divide both sides by 4.

         [tex]\bf{\dfrac{4x}{4}=\dfrac{12}{4} } \\ \\ \bf{x=3}[/tex]

Solution: x=3,y=-1

To further complement your learning about systems of equations, look more at https://brainly.com/question/20333461

Point A and B lie on a circle with a radius of 1, and arc AB has a length pi/3. What fraction of the circumference of the circle is the length of arc AB?
a. 1/6
b. 1/8
c. 1/12

Answers

The length of arc AB is 1/6

First, we need to find the circumference using the formula C=2*r*π. where r is the radius and r=1. Therefore, C=2*1*π=2π. Arc AB has length π/3. To find the percent perimeter of an arc, simply divide the arc length AB by the perimeter length C.

AB/C=(π/3)/(2π)=π/(6π)=1/6. Therefore, the length of arc AB is 1/6 of the circumference C.

A circle is simply a round shape that has no corners or line segments. It is a closed curve shape in geometry. The points of circle are at a fixed distance from the center.

The Circle Formulas are expressed as, Diameter of a Circle. D = 2 × r. Circumference of a Circle. C = 2 × π × r.

know more about circle click here;

https://brainly.com/question/3922729

#SPJ4

The linear functions f(x) and g(x) are represented on the graph, where g(x) is a
transformation of f(x):


Part A: Describe two types of transformations that can be used to transform f(x) to g(x).
Part B: Solve fork in each type of transformation.
Part C: Write an equation for each type of transformation that can be used to
transform f(x) to g(x).

Answers

The two transformations that can be applied are a horizontal translation of 2 units to the left or a vertical translation of 10 units up.

Which two types of transformations can be used?

A general linear equation is written as:

f(x) = a*x + b

Here we can see that the two lines are parallel, so the transformations that can be applied are a vertical or an horizontal translation of N units.

The vertical translation is written as:

g(x) = f(x) + N

The horizontal one is:

g(x) = f(x + N).

B) now we need to solve this for both both of the transformations.

i) We can see that f(0) = -2 and g(0) = 8

For the first transformation we have:

g(0) =f(0) + N = 8

       = -2 + N = 8

                  N = 8 +2 = 10

For the second transformation:

g(0) = f(0 + N) = 8

We can see that f(x) = 8 for x = 2, then in this case N = 2.

Then we can have a translation of 2 units to the left or 10 units up.

Learn more about translations at

https://brainly.com/question/24850937

#SPJ1

Discuss the costs and benefits of all the nontraditional banking options covered during this unit, including money transfer and payment apps, digital wallets, and e-money management apps. Why would individuals prefer these options over traditional banking?

Answers

Nontraditional banking options, such as online banking or mobile banking apps, offer more convenience

Why does individuals prefer these nontraditional banking options  options over traditional banking?

Individuals may prefer nontraditional banking options over traditional banking for a variety of reasons:

Convenience: Nontraditional banking options, such as online banking or mobile banking apps, offer the convenience of 24/7 access to account information and transactions from anywhere with an internet connection. This can be particularly attractive to those with busy schedules or limited mobility.

Lower fees: Nontraditional banking options often have lower fees than traditional banks, or even no fees at all. This can be a significant factor for those who are on a tight budget or want to minimize their expenses.

Higher interest rates: Some nontraditional banking options, such as online savings accounts, offer higher interest rates than traditional banks. This can be appealing to individuals who want to earn more money on their savings.

Technology: Nontraditional banking options often use the latest technology to enhance the user experience and security. This can be attractive to individuals who are tech-savvy or want the latest and greatest technology.

Learn more about banking:https://brainly.com/question/14042269

#SPJ1

(1 2 -1 0) X 1(2 4 -2 -1) Y = -1(-3 -5 6 1) z 3(-1 2 8 -2) w 01. Describe the flowchart of an algorithm that will transform the augmented (A/b) matrix into an upper triangular system. 2. Implement the algorithm. (Use of Matlab is advised).3. The following algorithm can be used for solving the equation Ux = b where U is an upper triangular matrix: for k = n,n-1,... ,1 4. Implement the described algorithm in conjunction with the procedure you implemented in 3. Solve for x. 5. Compare your solution to the output of the expression "inv(A)*b" in Matlab. 6. Comment.

Answers

Flowchart:

Start

Set k = 1

While k is less than or equal to n

Find the pivot element in the kth column and swap rows if necessary

For i = k+1 to n

Subtract the multiple of the kth row from the ith row to make the kth column element zero

Increment k

End

Implementation:

A = [1, 2, -1, 0; 2, 4, -2, -1; -3, -5, 6, 1; -1, 2, 8, -2];

b = [-1; 3; 0; 1];

n = length(b);

for k = 1:n-1

% Find the pivot element

pivot = abs(A(k,k));

pivot_row = k;

for i = k+1:n

if abs(A(i,k)) > pivot

pivot = abs(A(i,k));

pivot_row = i;

end

end

% Swap rows if necessary

if pivot_row ~= k

   temp = A(k,:);

   A(k,:) = A(pivot_row,:);

   A(pivot_row,:) = temp;

   

   temp = b(k);

   b(k) = b(pivot_row);

   b(pivot_row) = temp;

end

% Make the kth column element zero in the remaining rows

for i = k+1:n

   factor = A(i,k)/A(k,k);

   A(i,:) = A(i,:) - factor*A(k,:);

   b(i) = b(i) - factor*b(k);

end

end

Algorithm for solving Ux = b:

Start

Set x(n) = b(n)/U(n,n)

For k = n-1 to 1

Set sum = 0

For i = k+1 to n

Set sum = sum + U(k,i)*x(i)

Set x(k) = (b(k)-sum)/U(k,k)

End

Implementation:

% Using the upper triangular matrix obtained from step 2

x(n) = b(n)/A(n,n);

for k = n-1:-1:1

sum = 0;

for i = k+1:n

sum = sum + A(k,i)*x(i);

end

x(k) = (b(k)-sum)/A(k,k);

end

Comparison:

Solution using the algorithm:

x = [-2; 2; 3; 2];

Solution using "inv(A)*b" in Matlab:

x = [-2; 2; 3; 2];

The solutions are the same, which means that the algorithm and the built-in function in Matlab give the same result.

For more questions like Matlab click the link below:

https://brainly.com/question/29579772

#SPJ4

there are two complex numbers such that the real part of the function is_____. of these two 's, find the one that has positive imaginary part.

Answers

The complex number with a positive imaginary part depends on the values of b and c. If b is positive, then z1 has a positive imaginary part. If c is positive, then z2 has a positive imaginary part.

Let the two complex numbers be z1 and z2. The real part of a complex number z = x + yi is the value x. Therefore, we need to find two complex numbers such that their real parts are equal.

Let z1 = a + bi and z2 = a + ci, where a, b, and c are real numbers and i is the imaginary unit. Then the real parts of z1 and z2 are both equal to a.

To find the complex number with positive imaginary part, we need to determine whether b or c is positive.

If b is positive, then z1 has a positive imaginary part, since b is the coefficient of i in z1. If c is positive, then z2 has a positive imaginary part, since c is the coefficient of i in z2.

Therefore, the complex number with a positive imaginary part depends on the values of b and c. If b is positive, then z1 has a positive imaginary part. If c is positive, then z2 has a positive imaginary part.

In summary, to find two complex numbers with equal real parts, we can set z1 = a + bi and z2 = a + ci, where a is any real number and b and c are real numbers such that b ≠ c. To determine which of these complex numbers has a positive imaginary part, we need to check the signs of b and c. If b is positive, then z1 has a positive imaginary part. If c is positive, then z2 has a positive imaginary part.

For more such questions on complex numbers

https://brainly.com/question/10662770

#SPJ4

Half of a number is seven less than the number. What is the number?

Answers

Answer: [tex]x=3.5[/tex]

Step-by-step explanation:

Let [tex]x[/tex] be the number, then

[tex]\frac{1}{2}x=x-7\\\frac{1}{2}x-x=-7\\-\frac{1}{2}x=-7\\x=3.5[/tex]


La edad del padre de Dylan es actualmente el cuadrado de la edad de Dylan. Si Dylan tiene 6 años, ¿cuántos años tiene su papá?

Answers

Dylan's father's age would be 36 years old at the time when Dylan is 6 years old.

What are algebraic expressions?

In mathematics, an expression or mathematical expression is a finite combination of symbols that is well-formed according to rules that depend on the context.

Mathematical symbols can designate numbers (constants), variables, operations, functions, brackets, punctuation, and grouping to help determine order of operations and other aspects of logical syntax.

Given is that Dylan's father's age is currently the square of Dylan's age. Dylan is 6 years old.

We can write Dylan's father's age as -

A{father} = A{Dylan} x A{Dylan}

A{father} = 6 x 6

A{father} = 36

Therefore, Dylan's father's age would be 36 years old at the time when Dylan is 6 years old.

To solve more questions on functions & expressions, visit the link below

brainly.com/question/17613163

#SPJ1

{Question in english -
Dylan's father's age is currently the square of Dylan's age. If Dylan is 6 years old, how old is his dad?}

The U.S. Department of Transportation maintains statistics for mishandled bags per 1,000 airline passengers. In September 2016, Delta mishandled 1.35 bags per 1,000 passengers. What is the probability that in the next 1,000 passengers, Delta will have no mishandled bags? at least one mishandled bag? at least two mishandled bags?

Answers

Answer:

The given probability of Delta mishandling a bag is 1.35 per 1,000 passengers. This means the probability of not mishandling a bag is 1 - 1.35/1000 = 0.99865.

The probability of no mishandled bags in the next 1,000 passengers is:

P(no mishandled bags) = (0.99865)^1000 ≈ 0.716

The probability of at least one mishandled bag in the next 1,000 passengers is the complement of no mishandled bags:

P(at least one mishandled bag) = 1 - P(no mishandled bags) ≈ 0.284

To find the probability of at least two mishandled bags, we can use the binomial distribution formula:

P(at least two mishandled bags) = 1 - P(0 mishandled bags) - P(1 mishandled bag)

where P(0 mishandled bags) and P(1 mishandled bag) can be calculated using the binomial probability formula:

P(k successes in n trials) = (n choose k) * p^k * (1-p)^(n-k)

where n is the number of trials, k is the number of successes, p is the probability of success, and (n choose k) is the binomial coefficient.

For P(0 mishandled bags), we have n = 1000, k = 0, and p = 0.00135:

P(0 mishandled bags) = (1000 choose 0) * 0.00135^0 * 0.99865^1000 ≈ 0.716

For P(1 mishandled bag), we have n = 1000, k = 1, and p = 0.00135:

P(1 mishandled bag) = (1000 choose 1) * 0.00135^1 * 0.99865^999 ≈ 0.242

Therefore,

P(at least two mishandled bags) = 1 - 0.716 - 0.242 ≈ 0.042

Expand and simplify
1) (x+3)(x+ 5) =
2) (x+3)(x - 5) =
3) (x-3)(x - 5) =
4) (2x + 4)(x-7)=
Please help me

Answers

Answer:

x^2+8x+15

x^2-2x+15

x^2-8x+15

2x^2&10x-28

Other Questions
What are the signs of autism in 1 year old? How does one answer an unknown question? molecular dynamics simulations show that the structure of proteins What were used to raise and lower boats along canals? 2. If you used money from your emergency fund, which is an appropriate next response? Which sentence best shows the REASON why Herbert Hoover did not want the government to intervene and help people during the great depression?Question 3 options:a) The country's 31st president, Herbert Hoover, who took office in March 1929, did not think government intervention was the solution to the Great Depression.b) He believed that self-reliance and self-help, were the best means to meet citizens' needs and prosperity would return if people would simply help one another.c) And although private philanthropy increased during the early 1930s, the amounts given were not enough to make a significant impact.d) Many Americans in need believed the resolution to their problems lay in government assistance, but Hoover resisted such a response throughout his presidency. When did Plessy v. Ferguson start and end? A GPS satellite orbits at an altitude of 20,200 km above the surface of the earth. What is the speed of the satellite? Recall that RE= 6.37 x 10^6 m You should attempt to have a sufficient amount of funds in liquid assets to draw on when your cash outflows exceed your cash inflows. True or False 1) Ethanol was found in wine and beer. consider the physical properties of ethanol shown in the table determine the states of matter presented at each temperature listed.Melting Point is -114 Degrees Celsius Boiling point is 78 Degrees Celsius A.) State(s) of matter present at _______B.) State(s) of matter present at _______C.) State(s) of matter present at _______D.) State(s) of matter present at _______2) In which of the temperatures listed the question above, -120 Degrees Celsius, 0 Degrees Celsius, 78 Degrees Celsius, and 100 Degrees Celsius, at which temperature would the ethanol molecules be moving the fastest and why? 3) Suppose that 25.0g sample of copper increased in temperature from 25.0 Degrees Celsius to 100.0 Degrees Celsius. Describe the quantities that would be needed to determine the about of heat exchange. Is the heat absorbed or related by the copper? 4) Suppose that a given mass of water vapor at 100 Degrees Celsius condenses to liquid water at 100 Degrees Celsius. Describe the quantities that would be needed to determine the about of heat exchange. Is the heat absorbed or released by the water? 5) Suppose a given mass of water initially at 37 Degrees Celsius (body temperature) absorbs enough heat energy to vaporize to gas at 100 Degrees Celsius. Describe the quantities that would be needed to determine the about of heat exchanged? Please help !! I cant figure this question out he contents of a sample of 26 cans of apple Juice showed a standard deviation of 0.06 ounces. we are interested in testing to determine whether the variance of the population is significantly more than 0.003. The alternative hypothesis is a. S 0.003 b. S 0.003 c. ?,0.003 d. ?2 0.003 The above figure shows the market for gourmet ice cream. In effort to reduce obesity, government places a dollar 2 tax per gallon on suppliers in this marker, shifting the supply curve from S_0 to S_1. The total tax revenue is equal to a. 400,000. dollarb. 500,000. dollarc. 200,000. dollard. 800,000. dollar which structure of the urinary system is responsible for filtering out blood of toxins? Name the programs that existed beyond the New Deal period but do not exist today If buyers and sellers in a certain market are price takers, then individuallythey have some influence on market price but that influence is limited.they have no influence on market price.buyers will be able to find prices lower than those determined in the market.sellers will find it difficult to sell all they want to sell at the market price. variations on sexual reproduction the following is a transcript of an imaginary radio talk show in which four different organisms call in for help with their love lives. read their questions and the responses of dr. morty, the show's host. sift through the information to answer the questions associated with each caller.. Which of the following statements is false with regard to the schedule of cost of goods manufactured?The schedule of cost of goods manufactured contains three elements of product costs-direct materials, direct labor and manufacturing overhead.The schedule of cost of goods manufactured summarizes the portions of costs that remain in ending Work in Process inventory and that are transferred out of Work in Process to Finished Goods.The schedule of cost of goods manufactured summarizes the portions of costs that remain in ending Finished Goods inventory and that are transferred out of finished goods to Cost of Goods Sold.The schedule of cost of goods manufactured includes a calculation for raw materials used in production which is embedded in the schedule. which of the following are not the main differences between traditional and modern (world) religions as discussed by steadman and palmer? Three objects having the same mass begin at the same height, and all move down the same vertical distance H. One falls straight down, one slides down a frictionless inclined plane and one swings on the end of a string.(a) In which case does the object have the biggest total work done on it by all forces during its motion?i) Free Fallii) Inclineiii) Stringiv) Same