A python code only runs the except block when _____. Group of answer choices all the statements in the try block are executed an error occurs in the preceding try block the programmer manually calls the except block an error occurs anywhere in the code

Answer:

(b) srand(time(0))

Explanation:

Given

See attachment for options

Required

Which would generate different set of random numbers

To do this, we analyze each of the options - one at a time.

(a) srand()

The above is an invalid usage of srand() because srand() requires an argument for it to function e.g. srand(2)

(b) srand(time(0))

The above is valid, and it will return different pseudo random numbers each time the statement is executed because time(0) lets srand() seed to the current time.

(c) srand(100)

The above is a valid usage of srand(), however rand() will generate same set of numbers because srand() has been seeded to only 100.

(d) time(srand())

The above is also an invalid usage of srand().

Answer:

[tex]E = 14.81\%[/tex]

Explanation:

Given

[tex]n = 150[/tex]

[tex]\sigma = 0.78[/tex]

[tex]c = 0.98[/tex]

Required

The margin of error (E)

This is calculated as:

[tex]E = z * \frac{\sigma}{\sqrt{n}}[/tex]

When confidence level = 0.98 i.e. 98%

The z score is: 2.326

So, we have:

[tex]E = 2.326 * \frac{0.78}{\sqrt{150}}[/tex]

[tex]E = 2.326 * \frac{0.78}{12.247}[/tex]

[tex]E = \frac{2.326 *0.78}{12.247}[/tex]

[tex]E = \frac{1.81428}{12.247}[/tex]

[tex]E = 0.1481[/tex]

Express as percentage

[tex]E = 14.81\%[/tex]

The correct answer to this open question is the following.

Memorandum.

To: IT class.

From: Professor Smith.

Date:

Dear students,

The purpose of this memorandum is to let you all know the requirements of an ideal computer room.

1.- The compute room should be a decent, large, space, ready to accommodate the number of students that are going to participate in class.

2.- The proper temperature levels. All the hardware can't stand too much heat. We need ventilators and the right temperature for safety purposes.

3.- The organization of the PCs on every desk must be precise in order to have enough room for everybody's participation and interaction.

4.- Have a proper fire suppression system in place. The risk of fire when working with electronics is considerable.

5.- Access control. The equipment is expensive and must be just for qualified students. Have the proper control-access system to keep the place safe.

Thank you for your attention.

With your cooperation, the computer room should be a place to learn and have fun learning new things.

Answer:

b. False

Explanation:

Decomposing and modularizing means that a large software is being divided into smaller named components that have a well-defined interfaces which basically describes the component interactions. The main goal is to place these different functionalities as well as the responsibilities in different components.

Decomposition and modularization forms the principle of software design.

Hence, the answer is false.

The statement that  is true is that  Network traffic can be captured using the Tcpdump protocol analyzer.

Network traffic can be taken in using the Tcpdump. This is known to be a kind of packet sniffer that is often used to look and record network traffic on an interface.

An example is when a person capture 1,000 packets through the use of tcpdump. One can then analyze network traffic by using actual network traffic analyzer, which is as Wireshark.

Learn more about Network traffic from

https://brainly.com/question/26199042

Answer:

-16000

Explanation:

Given

P(success) = 0.75

Amount generated on success, X = 240000

P(not successful) = P(success)' = 1 - 0.75 = 0.25

Revenue generated, 0

Product development cost = 196000

Profit = Revenue - cost

When successful ; 240000 - 196000 = 44000

Unsuccessful ; 0 - 196000 = - 196000

x __________ 44000 _____ - 196000

P(x) _________ 0.75 _________ 0.25

The expected value ; E(X) = Σx * p(x)

Σx * p(x) = (44000 * 0.75) + (-196000 * 0.25)

= 33000 + - 49000

= - 16000

Hence, the company should not make the product

Answer:

-16000

Given P(success) = 0.75

Amount generated on success, X = 240000

P(not successful) = P(success)' = 1 - 0.75 = 0.25

Revenue generated, 0

Product development cost = 196000

Profit = Revenue - cost

When successful ; 240000 - 196000 = 44000

Unsuccessful ; 0 - 196000 = - 196000

x __________ 44000 _____ - 196000

P(x) _________ 0.75 _________ 0.25

The expected value ; E(X) = Σx * p(x) Σx * p(x) = (44000 * 0.75) + (-196000 * 0.25) = 33000 + - 49000 = - 16000 Hence, the company should not make the product

Explanation:

edge 2021

Answer:

COMPUTER: Common Operating Machine Purposely used for Technological and Educational research.

Explanation:

By the way, a computer is not an acronym and is the name of an electronic device.

A computer is a simple machine that we can program for a lot of logical and arithmetic functions, and it executes our work according to our instructions.

in simple words, a computer is an electronic device that makes our work easy, and any computer that has been programmed for some set of works, it performs that task or works quickly and correctly.

Answer:

The summary of the given query would be summarized throughout the below segment. The output of the question is attached below.

Explanation:

Given values are:

here,

inp = input

By utilizing the below formula, we get

⇒ [tex]\frac{GM}{d^2}[/tex]

Now,

⇒ [tex]accel \ gravity=\frac{G\times M}{dist \ center**2}[/tex]

⇒ print("Acceleration of gravity: {:.2f}".format(accel_gravity))

Answer:A declaration defines an identifier (such as the name of a function or variable) that ... This topic introduces the Delphi language character set, and describes the syntax for ... The Delphi language uses the Unicode character encoding for its character set, ... Integer and real constants can be represented in decimal notation as ...

Explanation:

Answer:

Here is the code:-

#(5) Given that s refers to a set, write a statement that attempts  

#to remove the int value 11 from the set, but will do nothing if 11 is  

#not in the set  

#check if 11 is in not in s  

if 11 is not in s:  

   pass  

else:  

   #other wise remove 11 from s  

   s.remove(11)

Explanation:

Answer: it is also known as supervised learning

Explanation:

Deep learning is a sub field of machine learning and it refers to an artificial intelligence function that has to do with the imitation of the way that the brain works in the processing data which are used in making decisions.

It should be noted that deep learning is not thesame as supervised learning. While there's no creation of high-level abstraction of input features in the supervised learning, there's formation of abstractions of input features in deep learning.

no entendi me explicas porfavor para ayudarte?

Answer:

Each node on the network has an addres which is called the ip address of which data is sent as IP packets. when the client sends its TCP connection request, the network layer puts the request in a number of packets and transmits each of them to the server.

Answer:

Program.java  

import java.util.Scanner;  

public class Program {  

   public static boolean isPalindrome(String str){

       int start = 0, end = str.length()-1;

       while (start < end){

           if(str.charAt(start) != str.charAt(end)){

               return false;

           }

           start++;

           end--;

       }

       return true;

   }  

   public static int countPalindromePairs(String[] inarr){

       int count = 0;

       for(int i=0; i<inarr.length; i++){

           for(int j=i+1; j<inarr.length; j++){

               StringBuilder sb = new StringBuilder();

               sb.append(inarr[i]).append(inarr[j]);

               if(isPalindrome(sb.toString())){

                   count++;

               }

           }

       }

       return count == 0 ? -1 : count;

   }

   public static void main(String[] args) {

       Scanner sc = new Scanner(System.in);

       String line = sc.next();

       String[] inarr = line.split(",");

       int count = countPalindromePairs(inarr);

       System.out.println("RESULT: "+count);

   }

}

Explanation:

OUTPUT:

Answer:

The program in C++ is as follows:

#include <iostream>

#include <vector>

using namespace std;

int main(){

vector<int> nums;

int num;

cin>>num;

while(num != -1){

 nums.push_back(num);

 cin>>num; }  

for (auto i = nums.begin(); i != nums.end(); ++i){

    cout << *i <<endl; }

return 0;

}

Explanation:

This declares the vector

vector<int> nums;

This declares an integer variable for each input

int num;

This gets the first input

cin>>num;

This loop is repeated until user enters -1

while(num != -1){

Saves user input into the vector

 nums.push_back(num);

Get another input from the user

 cin>>num; }

The following iteration print the vector elements

for (auto i = nums.begin(); i != nums.end(); ++i){

    cout << *i <<endl; }

Answer:

total = 0

k = 1

while k <= 50:

total += k**2

k += 1

print(total)

Explanation:

Note: There some errors in the question. The correct complete question is therefore provided before answering the question as follows:

Use the variables k and total to write a while loop that computes the sum of the squares of the first 50 counting numbers, and associates that value with total. Thus your code should associate 1*1 + 2*2 + 3*3 +... + 49*49 + 50*50 with total. Use no variables other than k and total.

The answer is now explained as follows:

# Initialize k which is the number of term

k = 1

# Initialize total which is the sum of squares

total = 0

# Loop as long as k is less than or equal to 50.

while (k <= 50):

# Add the square of k to total in order to increase it

total = total + k * k

# Increase the value of k by one.

k += 1

# Finally, output total

print (total)

Answer:

a. tracert

Explanation:

Tracert is a computer network diagnostic demand which displays possible routes for internet protocol network. It also measures transit delays of packets across network. The given output is produced by a tracert command.

Answer:

ALTER TABLE Products

ADD Products_price float(5,2) DEFAULT 9.99,

ADD Adding_time datetime;

Explanation:

So at first we need to use ALTER TABLE statement, when we use this statement we also need to provide the table name. In this case, i assume it is 'Products'.

Then, as per question, we need to add two columns.

The first one is 'product_price' and it contains decimal points. So, we need to use ADD statement and give a column name like 'Prodcuts_price' and its datatype 'float' because it contains decimal or floating points. so, for 3 digits on the left and 2 digits on the right, it makes a total of 5 digits. So, we need to declare it like this. (5,2) it means a total of 5 digits and 2 after the decimal point. after that, we need to set our Default value using the DEFALUT statement. so DEFAULT 9.99. it will set the default value to 9.99 for existing products.

And for our next column, we give its a name like 'Adding_time' then it's datatype 'datetime' because it will contain date and times.

Solution :

App.java:  

import Controller.Controller;

import Model.Model;

import View.View;  

public class App

{  

public static void main(String[] args) // Main method

{  

Model model = new Model(); // Creates model object.    

View view = new View(); // Creates view object.    

Controller controller = new Controller(view, model); // Creates controller object that accepts view and model objects.    

}

}  

[tex]\text{Controller.java:}[/tex]  

package Controller;  

[tex]\text{impor}t \text{ Model.Model;}[/tex]

import View.View;  

[tex]\text{public class Controller}[/tex]

{

Model model; // Model object    

View view; // View object

public Controller(View v, Model m) // Method that imports both model and view classes as objects.

{

model = m;    

view = v;  

//view.basicDisplay(model.getData()); // basicDisplay method from View class prints FootballPlayer objects as Strings from Model class.  

view.basicDisplay(model.getMembers().get(1).getAttributeName(3));    

view.basicDisplay(model.getMembers().get(1).getAttribute(3));    

view.basicDisplay(model.getMembers().get(1).getAttributeNames());    

view.basicDisplay(model.getMembers().get(1).getAttributes());    

view.basicDisplay("size of names=" + model.getMembers().get(1).getAttributeNames().size());    

view.basicDisplay("size of attributes=" + model.getMembers().get(1).getAttributes().size());

}  

}  

FootballPlayer.java:

package Model;  

import java.util.ArrayList;  

public class FootballPlayer extends Person implements TableMember { // Used "extends" keyword to inherit attributes from superclass Person, while using "implements" to implement methods from TableMember interface.    

private int number; // Creating private attribute for int number.    

private String position; // Creating private attribute for String position.  

public FootballPlayer(String name, int feet, int inches, int weight, String hometown, String highSchool, int number, String position) // Full parameter constructor for FootballPlayer object (using "super" keyword to incorporate attributes from superclass).

{

super(name, feet, inches, weight, hometown, highSchool); // Used super keyword to include attributes from superclass.  

this.number = number; // Value assigned from getNumber method to private number instance variable for FootballPlayer object.  

this.position = position; // Value assigned from getPosition method to private position instance variable for FootballPlayer object.    

}  

public FootballPlayer() // No parameter constructor for FootballPlayer object.

{

this.number = 0; // Default value assigned to private number instance variable under no parameter constructor for FootballPlayer object.    

this.position = "N/A"; // Default value assigned to private position instance variable under no parameter constructor for FootballPlayer object.    

}  

Override

public String getAttribute(int n) // getAttribute method that is implemented from interface.

{

switch (n) { // Switch statement for each attribute from each FootballPlayer object. Including two local attributes, denoted by this. While the others are denoted by "super".

case 0:

return String.valueOf(this.number); // Use of the dot operator allowed me to discover String.valueOf method to output int attributes as a string.

case 1:

return this.position;

case 2:

return super.getName();

case 3:

return super.getHeight().toString();

case 4:

return String.valueOf(super.getWeight());

case 5:

return super.getHometown();

case 6:

return super.getHighSchool();

default:

return ("invalid input parameter");

}

}  

Override

public ArrayList<String> getAttributes() // getAttributes ArrayList method that is implemented from interface.

{

ArrayList<String> getAttributes = new ArrayList<>();    

for(int i = 0; i <= 6; i++){ // For loop to add each attribute to the getAttributes ArrayList from getAttributes method.    

getAttributes.add(getAttribute(i));    

}    

return getAttributes;

}  

Override

public String getAttributeName(int n) // getAttributeName method implemented from interface.

{

switch (n) { // Switch statement for the name of each attribute from each FootballPlayer object.

case 0:

return "number";

case 1:

return "position";

case 2:

return "name";

case 3:

return "height";

case 4:

return "weight";

case 5:

return "hometown";

case 6:

return "highSchool";

default:

return ("invalid input parameter");

}  

}  

Answer:

Address:   192.22.44.133         11000000.00010110.0 0101100.10000101

Netmask:   255.255.128.0     11111111.11111111.1 0000000.00000000

Network:   192.22.0.0/17         11000000.00010110.0 0000000.00000000 (Class C)

Broadcast: 192.22.127.255        11000000.00010110.0 1111111.11111111

HostMin:   192.22.0.1            11000000.00010110.0 0000000.00000001

HostMax:   192.22.127.254        11000000.00010110.0 1111111.11111110

Explanation:

1. E-gro.up

2. Faceb.ook

3. Gm.ail

4. Go to www.gm.ail.com

5. Gm.ail

6. Go to www.faceb.ook.com

These are the answers.

Answer:

In half duplex mode, the signal is sent in both directions, but one at a time. In full duplex mode, the signal is sent in both directions at the same time. In simplex mode, only one device can transmit the signal. In half duplex mode, both devices can transmit the signal, but one at a time.

Answer:

1) The value of x will be 6.

2) The value of y will be 7.

Explanation:

1) The value of x will be 6.  

The enum values are labeled by default from 1. This means that Sun = 1, Mon = 2, Tue = 3 and so on.  

So, x = Mon = 2 and y = Sat = 6  

x increases up to y = 6 in the while loop.  

and then y also increments by 1.  

2)So the value of y = 7.  

You will need actual printf("Sun") or printf("Mon") for printing the actual text for the enum.

Answer:

1 is the answer because ur trying to trick us

Explanation:

Explanation:

πr square

That's the formula for calculating area of a circle.

Answer:

Central processing unit (CPU)

Explanation:

A computer can be defined as an electronic device that is capable of receiving of data in its raw form as input and processes these data into information that could be used by an end user.

The central processing unit (CPU) is typically considered to be the brain of a computer system. It is the system unit where all of the processing and logical control of a computer system takes place.

Hence, the most important component in a computer is the central processing unit (CPU) because without it, it is practically impossible for the computer to run any software application or program.

Additionally, the component of the central processing unit (CPU) that controls the overall operation of a computer is the control unit. It comprises of circuitry that makes use of electrical signals to direct the operations of all parts of the computer system. Also, it instructs the input and output device (I/O devices) and the arithmetic logic unit on how to respond to informations sent to the processor.

Answer:

Explanation:

Qué tipo de solución alternativa estás buscando