A point charge placed in an electric field does experience a force due to the interaction of the electric field with the charge. At locations where the electric field is zero, the force on the point charge would be zero as well, as it would not experience any interaction with the field.
If the electric field strength is 1/(1.6 times 10^-19) N/C, the force on the point charge would be equal to the product of the electric field strength and the magnitude of the charge.
The direction of the force would depend on the sign of the charge - if it is positive, it would experience a force in the direction of the electric field, and if it is negative, it would experience a force in the opposite direction.
If the charge is moving along an electric field line, it would experience a force in the direction of the field.If the charge is moving perpendicular to an electric field line, it would experience no net force in the direction perpendicular to the field. However, it would still experience a force in the direction of the field due to the interaction of the field with the charge.If the electric field is produced by an equal amount of positive and negative charges, the net force on a point charge would be zero, as the field would cancel out. However, the charge would still experience a force due to the interaction of the electric field with the charge.Here you can learn more about the electric field
brainly.com/question/23826593
#SPJ4
The figure below shows three positions of the pedal on a bicycle, which has a crank 0.20 m long the cyclist exerts the same vertically downward push of 25 Newton with his foot. Calculate the turning effect in: A, B and C
The turning effect is 5 N/m.
What is the torque?We have to note that the torque is the product of the force and the distance that it has turned. The torque can be used to describe the kind of force that can be able to provide a turning effect.
In this case for the question that we have here we know that;
Force = 25 Newton
Distance = 0.20 m
Torque = 0.20 m * 25 Newton
= 5 N/m
This is the force that would cause the pedal to be turned so that we can have the movement of the bicycle as shown above.
Learn more about torque:https://brainly.com/question/25708791
#SPJ1
Now we replace the resistor in the circuit of problem 1 with a diode-connected PMOS device asshown.A. What W/L ratio is needed for M6 in order to set IREF = 25 mA?B. If M6 is implemented as a diode-connected nFET instead of pFET, what W/L ratio would berequired?C. Which implementation, pFET or nFET would take up the most area?
The circuit of an electric bell consists of an electromagnet, a switch, and a source of power. When the switch is activated, the electromagnet is energized, creating a magnetic field. This magnetic field attracts a metal hammer, which strikes a bell and produces a ringing sound. When the switch is released, the circuit is broken, de-energizing the electromagnet and allowing the hammer to return to its original position. This process repeats each time the switch is activated.
Learn more about the circuit:
https://brainly.com/question/28135236
#SPJ4
A team of engineers is developing a new waterslide for a theme park. The riders of the slide will climb several flights of steps to reach the top of the slide and will sit in a round inner tube as they slide down. The engineers are testing a computer simulation to measure the kinetic energy that the riders will have on the slide. The kinetic energy will be based on the potential, or stored. energy and will depend on mass and speed. The engineers want to develop a way to transfer the most kinetic energy to the riders to make their trip down the slide as fast as possible.
Which of these solutions would increase the kinetic energy in the model slide?
a. adding twists and turns to the slide b.
decreasing the volume of water pushing the riders
C. increasing the friction between the tube and the slide
d. increasing the number of flights of steps that the rider will climb
Please don’t give me a explanation and just give me the answer :)
The kinetic energy is increased by the number of flights of steps that the rider will climb. The correct option is D.
What is kinetic energy?The energy an object has as a result of motion is known as kinetic energy in physics. It is described as the effort required to move a mass-determined body from rest to the stated velocity. The body holds onto the kinetic energy it acquired during its acceleration until its speed changes.
Given that the engineers are testing the waterslide for the theme park.
As we can know that kinetic and potential energy are two energies which are converted from one to another. The potential energy is increased by increasing the height of the slide from the ground level.
If the potential energy is higher than the kinetic energy of the slider will also increase during the downward journey.
So by increasing the number of flights of steps that the rider will climb there will be more kinetic energy in the slide. The correct option is D.
To know more about Kinetic energy follow
https://brainly.com/question/13808546
#SPJ1
A spring with spring constant of 20 N/m is stretched 0.16 m from its equilibrium position. How much work must be done to stretch it an additional 0.063 m? Answer in units of J.
Answer: 0.497 J
Explanation:
Spring energy
Spring energy is stored in a compressible or stretchable object like a spring or rubber band.
The work done on a spring in changing its original length is converted to its elastic potential energy or spring energy.
Given -
The spring constant is k = 20N/m,
The initial stretch is x1 = 0.16m,
The additional stretch is x2 = 0.063m,
W = 0.5k (x1 + x2)^2 - 0.5k x1^2
W = 0.5 (20 N/m) (0.16m + 0.063m)^2
W = 0.497 J
a body falls to the ground in vertical direction. its total energy depends only on potential and kinetic energy and is equal to 725 j. give possible values for the potential energy epot ans the kinetic energy ekin for a moment during the falling.
Since the total energy of the body is constant, we can write Epot + Ekin is 725 J
We can express the potential energy of the body as a function of its height, h, relative to some reference point:
Epot = m * g * h
where m is the mass of the body, g is the acceleration due to gravity, and h is the height of the body.
We can express the kinetic energy of the body as a function of its velocity, v:
Ekin = 0.5 * m * v^2
Since the total energy is constant, we can substitute Epot + Ekin = 725 J into the expressions for Epot and Ekin:
m * g * h + 0.5 * m * v^2 = 725 J
For a moment during the falling, both the potential energy and the kinetic energy can have any non-negative value, as long as their sum is equal to 725 J. So, there are infinitely many possible values for the potential energy and the kinetic energy during the falling. For example, one possible set of values could be:
Epot = 500 J
Ekin = 225 J
Another possible set of values could be:
Epot = 700 J
Ekin = 25 J
And so on.
Read more about Energy:
https://brainly.com/question/15826495
#SPJ4
A 5.2 "kilo" bag of sugar is on a counter. How much work is required to put the bag on a shelf a distance of 0.37 m above the counter?
Answer: approximately 18.854 Joules of work is required to put the bag of sugar on the shelf. where Force is the weight of the bag of sugar and Distance is the vertical distance lifted.
Explanation:
where the i and f subscripts indicate quantities evaluated in the initial and final states, respectively. in the initial state, the electron is at rest at a point midway between the two plates. we choose this location as the reference point for the electric potential energy, so that (peel) is ?
We choose the point midway between the two plates as the reference point for the electric potential energy to quantify energy stored.
The electric potential energy (PE) is a measure of the energy stored in an electric field. It is defined as the work done by an external agent to move a charged particle from one point in the electric field to another.
In the case of an electron at rest at a point midway between two plates, we can choose this location as the reference point for the electric potential energy. This means that the electric potential energy at this point is zero, and all other points in the electric field can be defined relative to this reference point.
The i and f subscripts indicate quantities evaluated in the initial and final states, respectively. So, (PE)_i indicates the electric potential energy of the electron in the initial state, when it is at rest at the reference point, and (PE)_f indicates the electric potential energy of the electron in the final state, after it has been moved by an external agent.
The electric potential energy can be calculated using the formula PE = qV, where q is the charge of the electron and V is the electric potential difference between the initial and final states. In this case, the electric potential difference between the two plates can be calculated using the equation V = Ed, where E is the electric field strength and d is the distance between the plates.
Learn more about electric potential energy here:
https://brainly.com/question/12645463
#SPJ4
what will happen when O2 increases in the atmosphere
Answer:
Explanation:
when o2 increases, the co2 percentage drops. plants will die. because they needed CO2 for respiration. specially carbon cycle fell into verge.
A worker pushes horizontally on a large crate with a force of 235 N, and the crate is moved 3.3 m. How much work was done?
Answer:
Explanation:
The work done by a force on an object is equal to the product of the magnitude of the force, the distance moved by the object in the direction of the force, and the cosine of the angle between the force and the direction of motion.
In this case, the worker pushes the crate horizontally, so the force and the direction of motion are in the same direction. Therefore, the angle between them is 0 degrees, and the cosine of the angle is 1.
The work done by the worker on the crate is then:
work = force x distance x cos(angle)
= 235 N x 3.3 m x cos(0)
= 773.5 J
So the work done by the worker is 773.5 Joules (J).
Hello,
Answer:
The work done by a force on an object is given by:
Work = Force x Distance x cos(theta)
where Force is the magnitude of the force applied, Distance is the displacement of the object, and theta is the angle between the force and displacement vectors. Since the worker is pushing horizontally on the crate, the angle between the force and displacement vectors is zero degrees, and cos(0) = 1.
So, the work done by the worker is:
Work = Force x Distance x cos(theta)
Work = 235 N x 3.3 m x cos(0)
Work = 773.5 J
Therefore, the work done by the worker on the crate is 773.5 J.
Good luck !
A 11-kg cannonball is fired with a velocity of 19m / s from 28 m above the ground . It hits a target that is 11 m above the ground . With what velocity does it hit, in m / s ? (Round your answer to one decimal place if necessary .)
The required cannonball hits the target with a velocity of 26.25 m/s.
What is the law of conservation of energy?The law of conservation of energy states that sum, when the object is in motion the sum of the initial energy, is equal to the sum of the final energy.
The velocity of the cannonball just before it hits the target can be determined using the law of conservation of energy, which states that the total energy of a system is constant.
The initial potential energy of the cannonball is given by:
PE(i) = mgh
PE(i) = 11 kg * 9.8 m/s^2 * 28 m
PE(i) = 3018.4 J
The final potential energy of the cannonball is given by:
PE(f) = mgh
PE(f) = 11 kg * 9.8 m/s^2 * 11 m
PE(f) = 1185.8J
The initial kinetic energy of the cannonball is given by:
KE(i) = 0.5 * m * v^2
KE(i) = 0.5 * 11 kg * 19 m/s^2
KE(i) = 1985.5 J
Since the total energy of the system is conserved, we have:
PE(i)l + KE(i) = PE_(f) + KE_(f)
3018.4 J + 1985.5 J = 1185.8 J + KE(f)
KE(f) = 3791.1 J
Finally, the velocity of the cannonball just before it hits the target can be calculated from its kinetic energy:
v^2 = 2 * KE / m
v^2 = 2 * 3791.1J / 11 kg
v = √(2 * 3791.1 J / 11 kg)
v = 26.25 m/s
So the cannonball hits the target with a velocity of 26.25 m/s.
Learn more about the Conservation of energy here:
https://brainly.com/question/29775341
#SPJ1
FILL IN THE BLANK. when you increase your vehicle's speed, you must also increase your __ to compensate for limitations.
When you increase your vehicle's speed, you must also increase your following interval to compensate for limitations.
What is speed?
When an object travels an identical distance in a same amount of time, this is referred to as having uniform speed.The uniform speed determined by the ratio of the whole distance travelled by an object to the total amount of time it took to travel that distance is known as the average speed.Instantaneous speed: When an object is travelling at a variable pace, it refers to the speed of that object at any given moment in time.To know more about speed, click the link given below:
https://brainly.com/question/28224010
#SPJ4
A car traveling eastwards gains 1 m/s eastwards every second. The car is _____. Choose all that are correct.
traveling with constant velocity
changing its speed
changing its velocity
slowing down
accelerating
traveling with constant speed
speeding up
A car traveling eastwards gains 1 m/s eastwards every second. The car is E: accelerating and C: changing its velocity.
A car traveling eastwards that gains 1 m/s of velocity every second is considered to be accelerating. This is because acceleration is defined as the rate of change of velocity. In this case, the velocity of the car is changing in the eastward direction, indicating that it is accelerating eastwards. It is also important to note that acceleration can be either positive or negative, depending on the direction of the velocity change.
You can learn more about velocity at
https://brainly.com/question/24445340
#SPJ4
aball of mass 2kg has a diameter of 50cm falls in the pool. calculate its buoyant force and volume of water displaced
Answer:
Answer: Buoyant force = 19.6N. Water displaced = 0.065m³
Explanation:
The question says:
A ball of mass 2kg had a diameter of 50cm falls into a pool.
Calculate its buoyant force and volume of the water displaced.
According to Archimedes' principle, When a body is immersed fully or partially in a fluid, it experiences an upward force that is equal to the weight of the fluid displaced by it.
If Y is grounded while the balloon is still close to X, which of the following will be true?A) Electrons will flow from the sphere to the groundB) Electrons will flow from the ground to the sphereC) Protons will flow from the sphere to the groundD) Protons will flow from the ground to the sphere.
If Y is grounded while the balloon is still close to X, which of the following will be true, Protons will flow from the ground to the sphere.so, option (d) is correct.
What is proton ?
In the nucleus of every atom, there is a proton, a subatomic particle. Though going in the opposite direction from the electron, the particle has a positive electrical charge. The mass of an isolated proton, which is almost equal to that of a neutron, is just 1.673 x 1027 kg.
What is electron ?
It is possible for an atom to have an attached or detached electron, a negatively charged subatomic particle (not bound). The electron, along with protons and neutrons, is one of the three main particle types found inside an atom. Atomic nuclei are composed of protons, neutrons, and electrons.
Therefore, If Y is grounded while the balloon is still close to X, which of the following will be true, Protons will flow from the ground to the sphere.so, option (d) is correct.
Learn more about proton from the given link.
https://brainly.com/question/1481324
#SPJ4
when a firm has transcended a production or selling orientation, and attempts to discover and satisfy its customer's needs and wants, the firm is blank .
When a firm has transcended a production or selling orientation, and attempts to discover and satisfy its customer's needs and wants, the firm is customer-oriented.
A customer-oriented firm places the needs and wants of its customers at the forefront of all its decision-making processes. This approach goes beyond merely producing and selling products, as it takes into account the entire customer experience.
The focus is not just on meeting customer needs, but on anticipating and exceeding them. This involves collecting and analyzing customer data, regularly gathering feedback, and continuously improving the customer experience.
A customer-oriented culture also permeates all levels of the organization, from top management to front-line employees. The result is increased customer loyalty, higher sales and profits, and a stronger brand reputation. Ultimately, a customer-oriented approach helps a firm to establish a long-term, sustainable competitive advantage.
To learn more about customer orientation visit: https://brainly.com/question/30277805
#SPJ4
define a function using python ewma(data, alpha) for the exponential weighted moving average calculation, where alpha is the degree of weighting decrease coefficient. use the function to generate the results for alpha
Sure, here's an example implementation of the ewma function in Python:
import numpy as np
def ewma(data, alpha):
"""
Calculate the exponential weighted moving average of a given data array.
Args:
- data: a 1D numpy array containing the data points to be averaged.
- alpha: a float between 0 and 1 representing the degree of weighting decrease.
A higher value of alpha gives more weight to recent data points.
Returns:
- ewma: a 1D numpy array containing the exponentially weighted moving average of the input data.
"""
# Initialize variables
ewma = np.zeros_like(data)
ewma[0] = data[0]
for i in range(1, len(data)):
ewma[i] = alpha * data[i] + (1 - alpha) * ewma[i-1]
return ewma
To use this function, you can call it with your data array and the desired alpha value, like so:
data = np.array([1, 2, 3, 4, 5])
alpha = 0.5
result = ewma(data, alpha)
print(result)
This will output the exponential weighted moving average of the data array with the specified alpha value. You can change the value of alpha and the input data to generate different results.
Learn more about the exponential:
https://brainly.com/question/2456547
#SPJ4
An object has a constant acceleration a = 4 m/s². Its velocity is 1 m/s at t = 0, when it is at x = 7 m. How fast is it moving when it is at x = 8m? At what time is this?
The object is moving at a velocity of 5 m/s when it is at x = 8 m.
How to calculate?The velocity of an object with constant acceleration can be found using the equation:
v = v0 + at
where v0 is the initial velocity, a is the acceleration, and t is the time elapsed.
Given that the object has an acceleration of a = 4 m/s²
initial velocity of v0 = 1 m/s,
we can calculate the velocity at x = 8 m by solving for t and then substituting into the velocity equation:
x = x0 + v0t + 0.5at^2
x = 7 m + 1 m/s * t + 0.5 * 4 m/s² * t^2
x = 8 m
Expanding and solving for t, we find:
t = (8 - 7 - 1 * t) / (0.5 * 4 * t^2)
t = 1 s
So the object has been moving for 1 second, and its velocity at x = 8 m is given by:
v = v0 + at
v = 1 m/s + 4 m/s² * 1 s
v = 5 m/s
Learn more about velocity at: https://brainly.com/question/80295
#SPJ1
Felipe is riding his skateboard toward Lilah at 15 km/h. He throws a football to Lilah. The football is thrown at 8 km/h.
The football Felipe throws to Lilah will go at a speed of 23 km/h.
What is the relative velocity?The movement of an object in relation to another observer is known as its relative velocity. It is the pace at which one object's close location changes in reference to another object over time.
Felipe is riding his skateboard toward Lilah at 15 km/h. He throws a football to Lilah. The football is thrown at 8 km/h.
Then the velocity of the ball is given as,
v = 15 + 8
v = 23 km/h
The velocity of the ball will be 23 km / h.
More about the relative velocity link is given below.
https://brainly.com/question/19260269
#SPJ1
A cubic box of side a, oriented as shown, contains an unknown charge. The vertically directed electric field has a uniform magnitude E at the top surface and 4 E at the bottom surface. How much charge Q is inside the box?
The charge Q is inside the box for a cubic box of side a, oriented as shown, and contains an unknown charge is [tex]Q = \frac{4Ea^2}{k}[/tex].
To calculate the charge inside the cubic box, we may apply the electric field equation in terms of charge and distance:
[tex]E = \frac{kQ}{r^2}[/tex]
where r is the distance from the place of interest to the charge and k is Coulomb's constant.
The equation may be stated as follows since the electric field at the top surface is E:
[tex]E = \frac{kQ}{a^2}[/tex]
Because the electric field at the bottom surface is 4 E, the equation may be written as:
[tex]4E = \frac{kQ}{(a/2)^2}[/tex]
When we divide the second equation by the first, we get:
[tex]\frac{4E}{E} = \frac{\frac{kQ}{(a/2)^2}}{\frac{kQ}{a^2}}[/tex]
[tex]4 = \frac{(a/2)^2}{a^2}[/tex]
Solving for Q, we have:
[tex]Q = \frac{4Ea^2}{k}[/tex]
The uniform electric field at the top surface may thus be multiplied by the area of one box face, divided by Coulomb's constant, to get the amount of charge within the cubic box.
To learn more about the charge at
https://brainly.com/question/3412043
#SPJ4
The question is -
A cubic box of side a, oriented as shown, contains an unknown charge. The vertically directed electric field has a uniform magnitude of E at the top surface and 2E at the bottom surface. How much charge Q is inside the box?
Can someone answer these questions pls??
5. The density here will be 60/150 = 0.4 g/cm³
How is gravity explained?The force of gravity, often known as gravitation, affects every material thing in the universe. The gravity force tends to draw any two items or particles with nonzero mass toward one another. From subatomic to galaxy clusters, gravity affects things of all sizes.
What does gravitational mean in plain English?Gravitation seems to be the force in physics that draws two masses together. Unbelievably, every subatomic particle of matter with in cosmos attracts every other particle through gravity. The phrases attraction and gravity are sometimes used synonymously to refer to the attraction that exists between anything with mass or energy.
6) a. The weight of water causes this pressure .
b. As the weight of water increases the pressure increases too.
7) a. pascal (represented as Pa) can be used to measure pressure.
b. The number of particles increases.
c. The pressure will compress
8) The affect of drag on an object causes friction
To know more about gravitation visit:
brainly.com/question/3009841
#SPJ1
We once thought that the crisis facing the United States was simply a capitalist economic crisis.weakening national governance capacity internally and draining national soft power externally.
The thought is a significant issue facing by united states. In the capitalist economy, all the sectors are changing to private mode and labors facing competing issues.
What is capitalist economic crisis in US ?In capitalist democracies, there are impossibly high hurdles that prevent the government from opposing capitalism. Although the concept of "one person, one vote" gives the impression that everyone has an equal voice, the state is actually a system of institutions that we may influence by casting the proper votes.
Instead, it is wanted to demonstrate that capitalists wield excessive political power through both the market and the state, and that this power comes mainly from the productive assets they own.
The wealth of the wealthy, however, has been financialized during the past 40 years. Due to this, they now have more access to money markets to leave political areas. Even if this gives capitalists more leverage to evade expropriation demands, I'll conclude on a positive note.
Find more on capitalist crisis :
https://brainly.com/question/9281343
#SPJ1
A tourist purchases a car in England and ships it home to the United States. The car stickers advertised that the car's fuel consumption was the rate of 40 miles per gallon on the open road.
The tourist does not realize that the U.K. gallon differs from the U.S. gallon:
1 U.K. gallon =4.546 090 0 litres
1 U.S. gallon =3.785 411.8 litres
For a trip of 750 miles (in the United states), how many gallons of fuel does the mistaken tourist believe she needs ?
The actual amount of fuel needed for the 750 mile trip is 22.54 U.S. gallons.
What is fuel ?Fuel is a material that is burned or used to produce energy. It can come in many forms, including gasoline, diesel, propane, wood, coal, natural gas, and oil. Fuel can be used to power engines to move vehicles, generate electricity, and heat homes and buildings. It is a necessity of modern life, as it is required to power many of the machines, appliances, and systems that make our lives easier. Without fuel, transportation, communication, and many other essential services would be impossible. Fuel is often divided into two categories, renewable and non-renewable.
The tourist mistakenly believes that she needs 18.75 gallons of fuel for a trip of 750 miles. This is calculated as follows:
750 miles/40 miles per gallon = 18.75 gallons
However, since the tourist is using a U.K. gallon, which is larger than a U.S. gallon, the actual amount of fuel needed is less. To do the conversion, we need to convert the 18.75 gallons to litres and then back to U.S. gallons:
18.75 U.K. gallons x 4.546090 litres/U.K. gallon = 85.22 litres
85.22 litres/3.785411.8 litres/U.S. gallon = 22.54 U.S. gallons
Therefore, the actual amount of fuel needed for the 750 mile trip is 22.54 U.S. gallons.
To learn more about fuel
https://brainly.com/question/10172005
#SPJ4
Calculate the wavelength and the energy in joules associated with an NMR signal at 250 MHz. The wavelength of the signal is 1.2m and the energy is 1.67 x 10-25J?
The wavelength of an NMR signal at 250 MHz is 1.2m and its energy is 1.67 x 10⁻²⁵ J.
Nuclear Magnetic Resonance (NMR) spectroscopy is a widely used technique in physics and chemistry for determining the chemical and physical properties of substances. The frequency of an NMR signal is related to the magnetic field strength and the magnetic properties of the nuclei being studied.
The wavelength of an NMR signal can be calculated using the equation:
λ = c/v
where c is the speed of light (3 x 10⁸ m/s) and v is the frequency of the signal (250 MHz).
λ = c / v
λ = 3 x 10⁸ m/s / (250 x 10⁶ Hz)
λ = 1.2 m
The energy of an NMR signal can be calculated using the equation:
E = hv
where h is Planck's constant (6.63 x 10⁻³⁴ J s) and v is the frequency of the signal.
E = h × v
E = 6.63 x 10⁻³⁴ J s × (250 x 10⁶ Hz)
E = 1.67 x 10⁻²⁵ J
To learn more about Nuclear Magnetic Resonance visit: https://brainly.com/question/21024524
#SPJ4
A telecommunications tower is supported by three cables affixed to its top and ground. We can find the vertical force induced in the tower by the cables by a) considering the product to pairs of vectors and projecting a resultant force from the tower. b) Cartesian vector analysis to the coplanar forces, finding the resultant and direction cosine, and then resolving the resultant into its parallel and perpendicular components.c) applying Newton's second law of motion and the Pythagorean Theorem to the analysis. d) force resolution, the determination of force components to find the resultant vertical force on the tower. e) all of the above
The vertical force induced in the tower by the cables by:
e) all of the above. All of the methods listed (a, b, c, and d) can be used to find the vertical force induced in the tower by the cables, and each method provides a different approach to finding the solution. The choice of method will depend on the complexity of the problem and the level of mathematical sophistication required for the solution.
Vertical force inducedThe various methods listed (a, b, c, and d) all involve mathematical and physical principles that can be used to find the vertical force induced in the tower by the cables.
a) Product to pairs of vectors and projecting a resultant force from the tower: This method involves using vector dot products or cross products to find the projection of one vector onto another, which can then be used to find the magnitude and direction of the vertical force.
b) Cartesian vector analysis to the coplanar forces: This method involves finding the components of each cable force in a two-dimensional coordinate system, adding the components to find the resultant force, and then finding the direction cosine to determine the direction of the resultant force.
c) Applying Newton's second law of motion and the Pythagorean Theorem: This method involves using Newton's second law of motion (F = ma) to find the net force acting on the tower and then using the Pythagorean Theorem to find the magnitude and direction of the vertical force.
d) Force resolution: This method involves breaking down the cables' forces into their individual components, finding the net force in each direction, and then using vector addition to find the magnitude and direction of the vertical force.
Each method has its own advantages and disadvantages, and the choice of method will depend on the complexity of the problem, the level of mathematical sophistication required for the solution, and the desired level of accuracy.
Learn more about vertical force induced here:
https://brainly.com/question/16930114
#SPJ4
The vertical component of a force id 75N and the force itself is 140N. Calculate the horizontal component
Answer:
Below
Explanation:
The components form a RIGHT triangle with legs = Horizontal comp and Vertical comp and hypotenuse = the force...
SO you can use the Pythagorean theorem
Hypotenuse ^2 = leg1^2 + leg2^2
140^2 = 75^2 + Horizontal^2
Horizontal^2 = 140^2 = 75^2 = 13975
Horizontal = 118.2 N
A 5.7 diameter horizontal pipe gradually narrows to 3.6 cm. The the water flows through this pipe at certain rate, the gauge pressure in these two sections is 32.5 kPa and 24.0 kPa, respectively. What is the volume of rate of flow?
The volume rate of flow is approximately 102.3 cm if a 5.7 diameter horizontal pipe gradually narrows to 3.6 cm.
To determine the volume rate of flow in a pipe, we can use the equation for the continuity of fluid flow:
[tex]A1 * v1 = A2 * v2[/tex]
where A1 and A2 are the cross-sectional areas of the two sections of the pipe and v1 and v2 are the velocities of the fluid in each section.
We can first convert the diameter measurements to cross-sectional areas:
[tex]A1 = (π / 4) * (5.7 cm)^2 = 40.2 cm^2A2 = (π / 4) * (3.6 cm)^2 = 10.1 cm^2[/tex]
Next, we can use the formula for the velocity of a fluid in a pipe:
[tex]v = (2 * ΔP / ρ)^0.5[/tex]
where ΔP is the pressure difference across the pipe, and ρ is the density of the fluid.
Using this formula, we can find the velocities in each section of the pipe:
[tex]v1 = (2 * (32.5 kPa - 0) / 1000 kg/m^3)^0.5 = 2.53 m/sv2 = (2 * (24.0 kPa - 0) / 1000 kg/m^3)^0.5 = 1.94 m/s[/tex]
Finally, using the continuity equation, we can find the volume rate of flow:
[tex]V = A1 * v1 = A2 * v2V = 40.2 cm^2 * 2.53 m/s = 10.1 cm^2 * 1.94 m/sV = 102.3 cm^3/s[/tex]
So, the volume rate of flow is approximately 102.3 cm
Learn more about rate of flow here
https://brainly.com/question/19634805
#SPJ4
Rocket observations show that dust particles in Earth's upper atmosphere are often electrically charged.a) Find the distance separating two dust particles if each has a charge of +e and the Coulomb force between them has magnitude 1.00x10−14−14N.b) Calculate the mass of one of the dust particles if this Coulomb force would accelerate it at 4.50x1088m/s22. (In the upper atmosphere, effects from other nearby charges typically result in a small net force and acceleration.)
a. The distance separating two dust particles if each has a charge of +e and the Coulomb force is 2.5 × 10⁻³ m
b. The mass of one of the dust particles if this Coulomb force would accelerate it is 2.22 x 10⁻²³ kg.
What is force?
Force is a physical quantity that represents the interaction between two objects that cause changes in motion of the objects. Force can be defined as the push or pull effect on an object. It is a vector quantity, which means it has both magnitude and direction. The unit of force in the International System of Units (SI) is the Newton (N), which is defined as the force required to accelerate a mass of one kilogram at a rate of one meter per second squared.
a) The force between two charged particles can be calculated using Coulomb's law, which states that the force between two point charges is proportional to the product of the charges and inversely proportional to the square of the distance between them:
F = k × q1 × q2 / r²
where k is the Coulomb constant (8.99 x 10⁹ N m²/C²), q1 and q2 are the charges of the two particles, and r is the distance between them.
Given that the force between the two particles is 1.00 x 10⁻¹⁴ N and each particle has a charge of +e, we can rearrange the equation to solve for r:
r = [tex]$ \sqrt{\frac{k \times q_1 \times q_2 }{ F} }[/tex]
= [tex]$ \mathrm{ \sqrt{\frac{8.99 \times 10^2 N m^2/C^2 \times 2e^2 }{ 1.00 \times 10^{-14} N} } }[/tex]
= 2.5 × 10⁻³ m
b) To calculate the mass of one of the dust particles, we can use Newton's second law, which states that the net force acting on an object is equal to its mass times its acceleration:
F = m × a
where F is the force, m is the mass, and a is the acceleration. Given that the acceleration of the particle is 4.50 x 10⁸ m/s², we can rearrange the equation to solve for m:
m = F / a
[tex]$ \mathrm{= \frac{1.00 \times 10^{-14} N}{ 4.50 \times 10^8 m/s^2} }[/tex]
= 2.22 x 10⁻²³ kg
To learn more about force:
https://brainly.com/question/12970081
#SPJ4
Find the magnitude of the electric field, in newtons per coulomb, at the location of q a in the figure, given that q b = q c = q d = 4.9 nC , q = - 0.25 nC , and the square is 12 cm on a side
At the location of q a in the figure, given that q b = q c = q d = 4.9 nC , q = - 0.25 nC , and the square is 12 cm on a side. The magnitude of the electric field at the location of qa is 2.16 x [tex]10^{7}[/tex] N/C.
The electric field at a point due to a point charge is given by the formula:
E = k . q / r^2
where,
k = Coulomb's constant (8.99 x 10^9 Nm^2/C^2),
q = the charge producing the field,
r = the distance from the charge.
Let's call the side length of the square L. The charges qb, qc, and qd are located at the corners of the square, and are equidistant from the point where we want to calculate the electric field, so we can calculate the field due to each of them separately and then add them up.
The distance between the charges and the point of interest is L/√2. The electric field due to each charge can be calculated as:
E = k * 4.9 x 10^-9 C / (L/√2)^2 = k * 4.9 x 10^-9 C / (12/√2)^2 = k * 4.9 x 10^-9 C / (12/1.4142)^2
Adding the contributions from the three charges, the total electric field due to qb, qc, and qd is:
E = 3 * k * 4.9 x 10^-9 C / (12/1.4142)^2
Next, we need to calculate the contribution from the charge q. The electric field due to q can be calculated in the same way, but since q is negative, the direction of the field will be opposite to that due to the other charges:
Eq = - k * -0.25 x 10^-9 C / (L/√2)^2 = k * 0.25 x 10^-9 C / (12/√2)^2
Finally, the total electric field at the point is the sum of the contributions from all the charges:
Etotal = E + Eq = 3 * k * 4.9 x 10^-9 C / (12/1.4142)^2 + k * 0.25 x 10^-9 C / (12/√2)^2
So, the magnitude of the electric field at the location of qa is:
Etotal = √(Ex^2 + Ey^2) = √((3 * k * 4.9 x 10^-9 C / (12/1.4142)^2)^2 + (k * 0.25 x 10^-9 C / (12/√2)^2)^2)Etotal = √((3 * 8.99 x 10^9 Nm^2/C^2 * 4.9 x 10^-9 C / (12/1.4142)^2)^2 + (8.99 x 10^9 Nm^2/C^2 * 0.25 x 10^-9 C / (12/√2)^2)^2) = √((3 * 8.99 x 10^9 Nm^2/C^2 * 4.9 x 10^-9 C / (12/1.4142)^2)^2 + (8.99 x 10^9 Nm^2/C^2 * 0.25 x 10^-9 C / (12/√2)^2)^2) = 2.16 x 10^7 N/CSo the magnitude of the electric field at the location of qa is 2.16 x [tex]10^{7}[/tex] N/C.
Here you can learn more about the magnitude
brainly.com/question/13048048
#SPJ4
At depth of 12. 5m of chemicals solvent the pressure at bottom of storage tank due solvent was 306kpa calculatr the density of solvent take g=10m\s2
The density of solvent is 2448 kg/m³.
What is pressure?Per unit area across which a force is spread, pressure is the force delivered perpendicularly to an object's surface. In comparison to the surrounding pressure, gauge pressure is the pressure. Pressure is expressed using a variety of units.
Pressure is expressed using a variety of units. Some of them come from dividing a force unit by an area unit; for example, the SI pressure unit, the pascal, is derived from this (Pa).
According to the question:
ρ × 10 × 12.5 = 306 × 10³
ρ = 2448 kg/m³
Hence, the density of solvent is 2448 kg/m³.
Learn more about pressure here:
https://brainly.com/question/12497098
#SPJ1
Jasmine is investigating the effect force has on the motion of an object. She predicts if she puts a strong force on pushing a bowling ball, it will travel a farther distance than when a weak force is applied. Is her prediction correct? (Please answer quickly, it's due in 5 hours)
No, a weak or a strong force applied to the ball is unable to affect the motion of the ball.
No, the force applied to the bowling ball should be a strong force.
Yes, the force applied to the bowling ball affects the motion of the ball.
Yes, the ball will travel a longer distance when a weak force is applied.