Answer:
[tex]\boxed {\tt \frac{2}{3} \ or \ 0.666666667 \ g/cm^3}[/tex]
Explanation:
Density can be found by dividing the mass by the volume.
[tex]d=\frac{m}{v}[/tex]
The mass is 20 grams.
We have to find the volume.
To find the volume, multiply the length by the width by the height. V= l*w*h l= 2 cm, w= 5 cm, h= 3 cmV= 2 cm * 5 cm * 3 cm = 30 cm³[tex]m= 20 \ g\\v= 30 \ cm^3[/tex]
Substitute the values into the formula.
[tex]d=\frac{20 \ g}{30 \ cm^3}[/tex]
Divide.
[tex]d=\frac{2}{3} \ g/cm^3[/tex]
[tex]d= 0.666666667 \ g/cm^3[/tex]
The density is 2/3 grams per cubic centimeter.
Currently, the world population is about:
A. 7 billion
B. 450 million
C. 1.2 trillion
D. 700 million
Ruby wants to find out what variables affect the rate at which sugar dissolves in water. She records different information about four containers of water and sugar, as shown in the table below.
Which two containers should Ruby choose to investigate the effect that temperature has on the rate at which sugar dissolves?
Answer:
The correct answer is - containers 1 and 3.
Explanation:
In any experiment or investigation, there must be all the factors should be constant other than the variable that is changed to see the effect on the result or desired character.
In this experiment to check the effect of the temperature, there must be the only temperature is a variable that should be manipulated rest should remain constant. In container 1st and 3rd, all the variable amount of sugar, the method of mixing all are the same except temperature.
Thus, the correct answer is - 1 and 3rd.
difference between precion and accuarcy
Answer: accuracy is how close a value is to their true value, like how close a arrow gets to the bull's eye center. precision is how repeatable a measurement is, like how close a second arrow is to the first one.
Explanation:
Consider this situation: A block is at rest on an inclined
plane. Of the forces listed, identify which act upon the block.
•normal
•gravity
• applied
• friction
•tension
• air resistance
The forces, act upon the block which is at rest on an inclined plane, are:
normal force.force due to gravity.force due to friction.What is frictional force?Two surfaces that come into contact and glide against one another produce frictional force.
When the block is on an inclined plane, its weight is acting downwards for force of gravity, the surface on the plane acts an upward force named normal force. But to become it rest, a resistive frictional force acts on it. Hence, the forces, acts upon the block, are:
normal force.force due to gravity.force due to friction.Learn more about friction here:
https://brainly.com/question/1389727
#SPJ1
In a full sentence, explain the difference between static charge and static shock.
Answer:
The most significant difference between the static and current electricity is that in static electricity the charges are at rest and they are accumulating on the surface of the insulator. Whereas in current electricity the electrons are moving inside the conductor.
What does it mean to say that mass is conserved during a physical change?
This law states that, despite chemical reactions or physical transformations, mass is conserved — that is, it cannot be created or destroyed — within an isolated system. In other words, in a chemical reaction, the mass of the products will always be equal to the mass of the reactants.
Answer:
100% oon test
Explanation:This law states that, despite chemical reactions or physical transformations, mass is conserved — that is, it cannot be created or destroyed — within an isolated system. In other words, in a chemical reaction, the mass of the products will always be equal to the mass of the reactants.
Where is a bibliography or works-cited list placed within a paper or report?
in the introductory material
at the bottom of each page
at the end
in the appendix
Answer:
at the end
Explanation:
Answer:
at the end of the page
Explanation:
leave a rating for my dying soul please. :)
A box has pushed across the floor for 5.2 M with a 48 N force how much work is done?
Identify all the forms of energy in the picture below
identify thermal energy, mechanical energy, radiant energy, electrical energy, sound energy, and chemical energy
Answer:
we are going to focus on just a few. • Heat energy ( Thermal). • Mechanical energy. • Light (Radiant) energy. • Electrical energy. • Sound energy. • Chemical energy
If your mass is 63.7 kg, and you are standing 7.5 m away from a boulder with
a mass of 9,750.6 kg, what is the gravitational force between you and the
boulder? Newton's law of gravitation is F gravity
Gm; m2. The gravitational
constant G is 6.67 x 10-11 Nm2/kg?
7.36 × 10⁻⁷ Newton is the gravitational force between you and the boulder.
What is Gravity ?Gravity or gravitational force of the earth is defined as the force on which a planet attracts or pulls another planet towards the center. It is represented by symbol g.
What is Force ?Force is defined as the physical quantity and the vector quantity which acts on an object and causes the object to change its size and shape to stop moving and start moving to decelerate and accelerate. Force has both the directions as well as magnitude. The SI unit of force Newton which is also represented as N, named the scientist Sir Issac Newton.
What is Newton's Law of universal gravitational ?The Newton's Law of universal gravitational is defined as the universal force of attraction acting between the two bodies which is inversely proportional to the square of the distance between them and the directly proportional to the product of their masses.
It is represented as
[tex]F = \frac{G m_1 m_2}{r^2}[/tex]
Where,
F represents the gravitation force between the two bodies
G represents the gravitation constant
m₁ represents the first body mass
m₂ represents the second body mass
r represents the distance between the two bodies.
Here,
G = 6.67 x 10-¹¹ Nm²/kg
m₁ = 63.7 kg
m₂ = 9,750.6 kg
r = 7.5 m
Now by putting in the above formula we get the gravitational force between you and the boulder.
[tex]F = \frac{6.67 \times 10^{-11}\ Nm^2/kg \times 63.7\ kg \times 9,750.6\ kg}{(7.5 m)^2}[/tex]
[tex]F = \frac{4142825.1774 \times 10^{-11}\ Nm^2/kg}{56.25}[/tex]
= 7.37 × 10⁻⁷ N
Learn more about the Gravitational force here: https://brainly.com/question/72250
#SPJ2
The capitary action of water is caused the cohesion of water molecules to different types of molecules and the adhesion of water molecules with other water molecules true or false
Answer:
This is True
Explanation:
I just did this exact unit in bio last week I hope this helps ;)
Why red has the weakest energy?
Answer:
because plants or living things cant reflect with a red light
Explanation:
Answer:
Explanation:
Red has the longest wavelength so it has the lowest energy of any color.
what is the property of medium
Answer:tension, density, temperature and elasticity
Explanation:
"A car is travelling at 70 m/s. The driver sees a cow in the road and slows down with a constant acceleration for 10 seconds before coming to a stop. What is the car’s displacement by the time is stops." what information do you know?
The question does not ask for anything in particular. I will calculate the acceleration and distance.
Answer:
The acceleration of the car is [tex]-7\ m/s^2[/tex]
The distance traveled before stopping is 350 m
Explanation:
Constant Acceleration Motion
It's a type of motion in which the velocity of an object changes by an equal amount in every equal period of time.
Being a the constant acceleration, vo the initial speed, vf the final speed, and t the time, the following relation applies:
[tex]v_f=v_o+at\qquad [1][/tex]
The distance traveled by the object is given by:
[tex]\displaystyle x=v_o.t+\frac{a.t^2}{2}\qquad [2][/tex]
The car has an initial speed of v0=70 m/s when the driver sees a cow in the road and steps on the brakes with an (assumed) constant acceleration during t=10 seconds before stopping (vf=0).
With the information provided, we can calculate the value of the acceleration and the distance traveled.
Using the equation [1] we can solve for a:
[tex]\displaystyle a=\frac{v_f-v_o}{t}[/tex]
Substituting the numerical values:
[tex]\displaystyle a=\frac{0-70}{10}=-7\ m/s^2[/tex]
The acceleration of the car is [tex]-7\ m/s^2[/tex]
The distance is now calculated by using [2]
[tex]\displaystyle x=70\cdot 10+\frac{(-7)\cdot 10^2}{2}[/tex]
[tex]\displaystyle x=700-\frac{700}{2}=350\ m[/tex]
The distance traveled before stopping is 350 m
3The diagram shows three objects that are
moving. A force acts on each object. For each.
say how its movement will change.
Answer:
ball moves forward
direction of moving car is reversed
plane changes the direction
The force on the ball acting to the right may changes its falling to the net. The north-east force acting on the airplane can drag the plane to the eastward direction thus deviates the plane from north. The backward force acting on the car make it hindrance to its forward movement.
What is force?Force is an external agent acts on a body, to deform it or change its state from motion or rest. There are different type of forces such as magnetic forces, gravitational force.
Force accelerates a body to move where, as the mass increases, more force have to apply to accelerate the body. If two forces acting in opposite direction, the will cancel each other in magnitude.
The force acting on the ball makes it prevents from falling and the force acting on the plane can deviates its direction from north to eastwards. The backward force acting on the car decelerates the car from forward movement.
To find more on force, refer here:
https://brainly.com/question/28875770
#SPJ2
Viscous lidocaine 2% 30 mL Maalox (do not substitute Kaopectate) 60mL Diphenhydramine (use on hand stock 12.5mg/5mL elixir) 75 mg Carafate 1gm/10mL 40 mL The doctor wants the patient to use a daily dose of 2 teaspoons. How many doses are in the final product?
Answer:
There are approximately 16 dozes in the final product
Explanation:
The given parameters are;
The viscous lidocaine 2% 30 mL + Maalox 60mL + Diphenhydramine (12.5 mg/5mL elixir)75 mg + Carafate 1gm/10mL 40mL
The total volume becomes;
30 mL + 60 mL + 5 × 75/12.5 mL + 40 mL = 160 mL
1 Teaspoon = 4.928922 mL
Therefore, 2 teaspoon = 2 × 4.928922 mL = 9.857843 mL
Which gives;
The number of doses in 160 mL = 160 mL/(9.857843 mL) = 16.2307312 doses
Which is approximately 16 doses
Therefore, there are approximately 16 dozes in the final product.
Which of the following describes the rate at which work is done?
Force
Energy
Power
Impulse
Answer:
power
Explanation:
Why violet has the strongest energy?
Answer:
Explanation:
Because violet waves have the shortest wavelength of the visible light spectrum, they carry the most energy.
The organisms and environments that make up a community, called an Response area, are constantly changing. Sudden and violent events, such as Response area from the ocean and Response area, that often cause these changes are called Response area. Response area results when rainfall exceeds the holding capacity of a drainage system.
Answer:
ecosystem; hurricanes and tornadoes; catastrophic events.; Fooding; moving water; soil
Explanation:
After using the word bank to fill in the blanks in the passage, the passage reads;
"The organisms and environments that make up a community called an ecosystem are constantly changing. Sudden and violent events, such as hurricanes and tornadoes that often cause these changes are called catastrophic events. Fooding results when rainfall exceeds the holding capacity of a drainage system. The energy of the fast-moving water and the layers of sediment carried by it can uproot or bury plants, reshape the soil and destroy roads and buildings."
If a sled is being pulling on the ground toward the right with a force of 100 N and friction is acting on it to the left with a force of 85 N, what is the net force
of the sled?
O 15 N to the left
15 N to the right
185 N to the right
185 N to the left
Answer:
15 N to the right.
Explanation:
100 N to the right -->
85 N to the left <--
So therefore in order to find the net force of where the sled is being dragged towards is 100 N - 85 N = 15 N.
So the sled is moving towards the right of 15 N.
What does WNBA stand for
Answer:
Women's national basketball association
Explanation:
Answer: womens national basketball association
Explanation: my dream
Fill in the correct answers. A big wheel with twice the circumference of a small wheel will rotate with ____ the force and ___ the speed of the small wheel.
A) half, twice
B) Three times, half
C) twice, half
D) half, three times
Answer:
C.
Explanation:
""""""" Twice,Half """"""
A big wheel with twice the circumference of a small wheel will rotate with the force and the speed of the small wheel.
C) twice, half
Circumference of WheelA big wheel with twice the circumference of a small wheel will rotate with twice the force and half the speed of the small wheel.
It is the round circle found on the outside angle of the machine.
It is the adjusted barrel or rod-like portion put on the interior of the machine that's connected to the wheel and makes a difference to advance development.
Learn more about "Wheel":
https://brainly.com/question/8085467?referrer=searchResults
Does the moon control the waves in the ocean?
Answer:
no don't think so
Explanation:
JESUS CHRIST controls everything 100IQ
No, the moon does not directly control the waves in the ocean. The primary factors that influence the formation of waves in the ocean are wind and the interaction between wind and the water's surface.
The moon, however, does play a significant role in influencing the tides, which are the periodic rise and fall of the ocean's surface.
The gravitational force exerted by the moon, as well as the sun to a lesser extent, creates tidal bulges on the Earth. As the Earth rotates, these tidal bulges move around the planet, resulting in the daily cycle of high tides and low tides.
The gravitational pull of the moon is stronger on the side of the Earth facing the moon, causing a high tide, while on the opposite side, a high tide also occurs due to the centrifugal force resulting from the Earth's rotation. The areas in between experience low tides.
While tides can affect the height and intensity of ocean waves near the coastlines, the actual formation and behavior of waves are primarily driven by wind patterns, water depth, and other factors such as underwater topography.
Waves are generated when the wind transfers its energy to the water's surface, creating oscillations that propagate as waves. These waves can travel vast distances across the ocean, even in the absence of tidal influences.
In conclusion, while the moon's gravitational pull influences the tides, it does not directly control or generate the waves in the ocean.
Waves are primarily driven by wind and other factors, whereas tides are the result of gravitational forces acting on the Earth's oceans.
Know more about gravitational forces:
https://brainly.com/question/32609171
#SPJ4
What is avarage speed? (AS)
speed?
Answer:
average speed = total distance/total time
Define rest
Define motion
Answer:
motion: motion is the phenomenon in which an object changes its position over time. four common types of motion are rotary, oscillating, linear, and reciprocating.
rest is the polar opposite
Explanation:
can somebody helppp me pls thank you:)))))
HEY HEY HEY HEY
Explanation:
HEY HEY HEY HEY HEY
11. When gathering glassware and equipment for an experiment, you should
a. Read all directions carefully to know what equipment is necessary
b. Examine all glassware to check for chips or cracks.
C. Clean any glassware that appears dirty
d. All of the above
Answer:
C
Explanation:
Option D is the correct answer.
What are the importance when gathering glassware and equipment for experiment?Usually in the research labs there were some rules and we have follow those for our safety measures. Some importance rules while doing experiments were:
Flammable materials should be used in open.Always must use the experimental equipment given.While gathering we must read all directions carefully to know the necessary of the equipment.Glassware should be checked whether it's broken or not before using the equipment.All the glassware and equipment using for experiment must be clean.Should ask our lead or instructor before and after the experiment.While using a test tube we should be away from other people.We should use tongs before picking up the heating material and heated equipment.For any clarifications and doubts we should always ask and listen to the instructor.Hence, option D is the correct answer.
Learn more about the safety measures during experiment,
https://brainly.com/question/903711
#SPJ2
Which describes one event that causes an eclipse?
Earth’s rotation on its axis
shadows from clouds covering Earth
Earth’s shadow covering the moon
the gravity from the moon and Sun pulling in the same direction
Answer:
Earths shadow covering the moon would create a lunar eclipse.
Explanation:
because i just know
A lunar eclipse is occur when Earth’s shadow is covering the moon.
What is eclipse?An eclipse happens when one astronomical body like Earth or moon blocks light from or to another.
What is lunar eclipse?A lunar eclipse is caused by Earth blocking sunlight from reaching the moon and causing a shadow across the lunar surface.
What is solar eclipse?Sometimes when the Moon orbits Earth, the Moon moves between the Sun and Earth. When this happens, the Moon blocks the light of the Sun from reaching Earth. This causes an eclipse of the Sun, or a solar eclipse.
To know more about eclipse here
https://brainly.com/question/4279342
#SPJ2
A plane is heading south at 250 mi/hr. If the jet stream (wind) is blowing from west to the east at 80 mi/hr, what is the speed and direction of the plane?
Answer:
Speed = 262.49
Direction = 72.26°
Explanation:
[tex] \sqrt{ {250}^{2} + {80}^{2} } [/tex]
=262.49mi/hr
[tex] \tan( \alpha ) = \frac{y}{x} [/tex]
[tex] \tan( \alpha ) = \frac{250}{80} [/tex]
[tex] \alpha = {tan}^{ - 1} ( \frac{250}{80} )[/tex]
=72.26°
A ball is dropped off the roof of a tall building. If the ball reaches the ground in 8 seconds, how tall is the building, in meters? Round to the nearest whole number (a=9.8 m/s2)
Let b be the height of the building, and y the height of the ball at time t, given by
y = b - 1/2 gt²
where g = 9.8 m/s² is the magnitude of the acceleration due to gravity.
It takes the ball 8 s to reach the ground, at which point y = 0, so that
0 = b - 1/2 (9.8 m/s²) (8 s)²
b = 1/2 (9.8 m/s²) (8 s)²
b = 313.6 m