The smoke is drawn to and out of the drivers window because the car is in the motion.
In physics, motion is a function of a body's position or orientation over time. Translation is defined as movement along a line or a curve. Rotation is a motion that modifies a body's orientation. In all scenarios, the acceleration and directed speed of every point on the body are equal (time rate of change of velocity). Motion that involves both translation and rotation is the most generic type. Every movement has a frame of reference to which it is relative. A body is not in motion when it is said to be at rest; rather, it is being characterized in relation to a frame of reference that is moving with the body.
When the car is in the motion, the air outside the car is moving with velocity relative to that of car.The motion of the car is creating a pressure imbalance with the outside air.The air moving around the car has less pressure than the air inside the car, so a vacuum is created when you open a window, drawing the air out.
Learn more about motion
brainly.com/question/22810476
#SPJ4
convert the following measurements to the requested units maintaining the correct number of significant figures a) 515.0 g to kg b) 10.60 mm to m c) 452 cm3 to m3
When converting units, it's crucial to keep the right amount of significant figures. The number of significant figures in the final response should match that of the initial value.
a) To convert 515.0 g to kg, divide the mass in grams by 1000.
515.0 g / 1000 = 0.515 kg
b) To convert 10.60 mm to m, divide the length in millimeters by 1000.
10.60 mm / 1000 = 0.0106 m
c) To convert 452 cm3 to m3, divide the volume in cubic centimeters by 10^6.
452 cm3 / 10^6 = 0.000452 m3.
Significant figures are the number of digits that add to the correctness of a value, frequently a measurement. The first non-zero digit is where we start counting significant figures. The number of significant single digits (0 through 9 inclusive) in the coefficient of an expression in scientific notation is referred to as significant figures.
learn more about Significant figures here:
https://brainly.com/question/29153641
#SPJ4
The Rocky Mountains lie to the west of the Great Plains. If there were no Rocky Mountains, would the Great Plains exist? Yes, the Great Plains were formed from the sediments from the Mississippi River. Yes, the Rocky Mountains and the Great Plains are located on the different tectonic plates and were formed independently. No, the Rocky Mountains are former volcanoes that filled the area around them with magma to form the Great Plains. No, the Rocky Mountains are the source of the sediment that built the Great Plains
A) Yes, the Great Plains were formed from the sediments from the Mississippi River.
The rock of the Great Plains is sedimentary rock and the rock of the Rocky Mountains is igneous rock. They formed in different ways so they must not have formed together.
WHAT IS GREAT PLAINSThe Great Plains (Great American Desert) is a plain in North America that stretches from the Rocky Mountains, Canada to Mexico. It is bordered by the Rio Grande to the south, the Mackenzie River delta to the north, Canada to the east and the Rocky Mountains to the west.
This plain is a rocky, sandy area and is very short of water because it has a high evaporation rate. The Great Plains are about 3,000 miles (4,800 kilometers) long, 300–700 miles wide and about 1,125,000 square kilometers (2,900,000 square kilometers), about the equivalent of one third of the area of the United States.
Learn more about Great plains at https://brainly.com/question/20530869.
#SPJ4
An aluminum calorimeter with a mass of 0.111kg contains 0.680 kg of water at 37°C
A medium sized cube of ice at 0.0 °C is placed in the calorimeter and melts completely.
If the final temperature of the mixture was 0.0 °C, what was the mass of the ice cube?
The mass of the ice cube is 0.33 kg.
What is the mass of the ice cube?
The mass of the ice cube is calculated by applying the principle of conservation of energy as follows;
heat loss by the aluminum calorimeter = heat gained by the ice
(m₁c₁ + m₂c₂)Δθ = mH
where;
m is the mass of the ice
H is the heat of fusion of icec₁ is the specific heat capacity of aluminumc₂ is the specific heat capacity of the water( 0.111 x 900 + 0.68 x 4184 ) (37 - 0 ) = 334,000 x m
108,965.74 = 334,000m
m = 0.33 kg
Learn more about heat capacity here: https://brainly.com/question/16559442
#SPJ1
quiz electrostatics apex
Play this game to review Electricity. When an object gains electrons it becomes ______.
When a thing gains electrons in electricity, it'll become negatively charged. The collection of phenomena known as electricity is related to the existence and mobility of matter that possesses an electric charge.
An electricity is what?The movement of electricity generation or charge is known as electricity. It is a sustainable energy source, meaning that we obtain it through the conversion of main energy sources like coal, fossil fuels, oil, nuclear power, and many other essential minerals.
What components make up electricity?In accordance with the U.S. Energy Management Administration, coal, nuclear power, and natural gas made up the majority of the country's electrical generation in 2020. Sources of renewable energy like wind, electricity, solar, biomass, wind, and groundwater are also used to generate electricity.
To know more about electricity visit:
https://brainly.com/question/1922668
#SPJ4
Acceleration Check in
A person drops a penny from the Empire State Building in New York City. What is the final velocity of the penny right before it hits the ground if it falls
for 12 seconds?
O 1.2 m/s
O 117.6 m/s
O 0.82 m/s
O 11.7 m/s
The final velocity of the ball is 117.6 m/s.
What is the final velocity?The first thing that we would need to know is the height of the building and we know that the height of the building that we are dealing with here is 1250 feet of we say that the height is 381 m.
We can now say that;
v= u + gt
It then follows that;
s = distance
u = initial velocity
g = acceleration due to gravity
t = time taken
Then we have that it was dropped from a height
Thus;
v^2 = 2gh
v = √2 * 9.8 * 381
v = 9.8 * 12
v = 117.6 m/s
Learn more about velocity:https://brainly.com/question/18084516
#SPJ1
the velocity of an object changes with time as shown. if the object is known to be at x = -10 m when t = 0 s, what is the position of the object at t = 4 s?
Actually, every second of time sees a change in velocity of 10 m/s, which is a constant. When an object's velocity changes, it is referred to as accelerating; this implies that the object has an acceleration.
What does velocity refer to?Velocity is the rate of change in direction of an object that is moving as measured by a specific standard of time and observed from a specific point of reference (for example, 60 km/h northbound).
Why does velocity formula exist?According to the formula v = s/t, speed (v) is a scalar quantity that quantifies dislocation (or a shift in position, s), over change in time (t).
To know more about velocity visit:
https://brainly.com/question/28738284
#SPJ4
a nuclear power plant generates 1 gwe at 37fficiency. water is piped into the facility at 10°c and is output from the facility at 32°c. determine the flow rate of the water in kg/s.
where T is the temperature change from 10°C to 32°C, q is the rate of heat transfer, m is the mass flow rate of water, c is the heat capacity of water, and m is the mass flow rate of water. The water flow rate in kg/s
The amount of fluid that passes through a pipe or container in one unit of time is referred to as the flow rate. It is often expressed in terms of volume per unit time, such as gallons per minute or cubic metres per second. The viscosity of the fluid, the pipe's diameter, the fluid's pressure, and the length of the pipe are some of the variables that might affect flow rate. In many applications, including water treatment, industrial operations, and energy generation, it is crucial to comprehend and manage flow rate. An improper flow rate can result in waste, inefficiencies, and even equipment
Learn more about flow rate here:
https://brainly.com/question/27880305
#SPJ4
A person on a road trip drives a car at different constant speeds over several legs of the trip. She drives for 10. 0 min at 50. 0 km/h, 19. 0 min at 100. 0 km/h, and 60. 0 min at 55. 0 km/h and spends 40. 0 min eating lunch and buying gas. What is the average speed for the entire trip (
The typical speed for the whole excursion is 83.24 km/h. To calculate the speed we have to calculate the distance and time.
To work out the normal speed of the whole excursion, you really want to decide the all out distance voyaged and partition that by the all out time spent driving.
Distance went at each speed:
a. 50.0 km/h for 10.0 min = 50.0 km/h * (10.0 min/60.0 min) = 8.33 km
b. 100.0 km/h for 19.0 min = 100.0 km/h * (19.0 min/60.0 min) = 31.67 km
c. 55.0 km/h for 60.0 min = 55.0 km/h * (60.0 min/60.0 min) = 55.0 km
Complete distance voyaged: 8.33 km + 31.67 km + 55.0 km = 95.0 km
Complete time spent driving: 10.0 min + 19.0 min + 60.0 min = 89.0 min
Normal speed: Complete distance voyaged/All out time spent driving = 95.0 km/(89.0 min/60.0 min) = 83.24 km/h
The units of speed and time should be reliable all through the estimation. For this situation, both speed and time are communicated in SI units (km/h and minutes, separately).
To learn more about distance and speed, refer:
https://brainly.com/question/15129204
#SPJ4
There is no god but Allah (SWT) and Prophet Muhammad (PBUH) is his messenger
There is no god but Allah (SWT) and Prophet Muhammad (PBUH) is his messenger. This is a contain of confession of faith in Islam religion.
About Islamic teachingsIn language, اسلام comes from the word سَلَم /سِلْم which means safe (as-salām), peace and tranquility, (al-shulhu wa al-amān), surrender (al-istislām), submission (al-khudlū'/al- id'zān), obedient (al-thā'ah). So, Islam means safety and peace because surrender is only to Allah SWT, who has no god but Him. Meanwhile, according to the term Islam is dīn or religion that originated from Allah SWT who was brought down through His Apostles, from the first Prophet: Adam as to the last Prophet: Muhammad saw for the benefit of mankind in this world and in the hereafter .
However, because divine (sky) religions have been changed by humans so that they are no longer original, the term Islam is only aimed at what was brought down by the Prophet Muhammad, namely something that was sent down by Allah SWT in the valid Al -Qur'an and al-Sunnah in the form of rules that contain orders, prohibitions and instructions for human welfare in this world and in the hereafter.
Learn more about islam at
https://brainly.com/question/29724916
#SPJ1
how many ounces in 500 ml
0.0520421 ounces in 500 ml .
What is volume ?
Volume is a measure of the amount of space occupied by an object or a substance. It is a scalar quantity and is expressed in units such as cubic meters, cubic centimeters, liters, or gallons. Volume is an important physical quantity that is used to describe the size of objects and the amount of a substance contained within a container.
In mathematics, volume is often used to describe the amount of space enclosed by a three-dimensional object, such as a cube, sphere, or cylinder. The formula for the volume of a three-dimensional object depends on its shape, but common formulas include the volume of a cube (V = s^3), the volume of a sphere (V = 4/3 π r^3), and the volume of a cylinder (V = π r^2 h).
To know more about Volume , click the link below ;
https://brainly.com/question/463363
#SPJ4
any solid cylinder will roll down an incline with greater acceleration than any hollow cylinder if
D) If none of the preceding conditions are met, then any solid cylinder will roll down an incline faster than any hollow cylinder.
What modifies acceleration when going up an incline?The force component parallel to the incline rises as the angle increases, whereas the force component perpendicular to the incline falls. The acceleration is brought on by the parallel portion of the weight vector. Therefore, accelerations increase as incline angles increase.
How can you calculate an object's downhill acceleration?A mass m particle will slide down an inclined plane if it is placed there and then released, meaning that there is no frictional force present. When a particle slides, we resolve in the direction of motion to determine the particle's acceleration. F = ma, mg cos(90) = ma, gg cos(90) = a, gg sin() = a.
To learn more about mass m particle here:
https://brainly.com/question/13732807
#SPJ4
Full Question = Any solid cylinder will roll down an incline with greater acceleration than any hollow cylinder if the...
a) diameter of the solid cylinder is large
b) mass of the solid cylinder is small
c) mass of the solid cylinder is large
d) none of the above are necessary
What is Rotational Kinetic Energy?
Rotational kinetic energy is the energy an object possesses due to its rotation around an axis. It is half of the product of an object's moment of inertia and angular velocity squared.
What is kinetic energy?
Kinetic energy is the energy required by an object as a result of its motion. It is equal to one half of an object's mass multiplied by its velocity squared.
Mathematically, it can be represented as E_k = 0.5 * m * v^2, where m is the mass of the object and v is its velocity. Kinetic energy is a scalar quantity and has the units of joules (J) in the SI system of units.
What is moment of inertia?
The moment of inertia of an object is a measure of its resistance to changes in rotation rate. It is a property of a rigid body that describes how its mass is distributed relative to a given axis of rotation. The greater an object's moment of inertia, the harder it is to change its rotational motion.
Mathematically, moment of inertia is defined as I = ∑mr^2, where m is the mass of each particle in the object and r is the distance from each particle to the axis of rotation.
To learn more about Rotational kinetic energy, visit: https://brainly.com/question/25803184
#SPJ4
why do we say that light is an electromagnetic wave? what is the relationship among wavelength, frequency, and speed for light?
We say that light is an electromagnetic wave because it is an oscillation of electric and magnetic fields. The relationship between wavelength, frequency and velocity of light is ν = c/λ.
What's in an Electromagnetic Wave?
When an electric field combines with a magnetic field, an electromagnetic wave is produced. The magnetic and electric fields of an electromagnetic wave are perpendicular to each other and perpendicular to the wave direction.
Light is also a combination of oscillating electric and magnetic fields perpendicular to each other, with wave propagation perpendicular to both fields. Because light is produced by accelerating charged particles (photons), according to the laws of electromagnetism, light is an electromagnetic wave.
Therefore, We say that light is an electromagnetic wave because it is an oscillation of electric and magnetic fields. The relationship (c) between wavelength, frequency and velocity of light is ν = c/λ.
To learn more about Electromagnetic Wave, click on the given link: https://brainly.com/question/25847009
#SPJ4
in the jackie smazz show, during molecule moments, what do the little white balls that are the subject of the show represent?
In the Jackie Smazz Show's "Molecule Moments," the little white balls are used to represent atoms or molecules.
The little white balls in the Jackie Smazz Show's "Molecule Moments" serve as a visual aid to help explain complex scientific concepts in a way that is both educational and engaging for viewers.
The show uses a stylized representation of these tiny building blocks of matter to explain scientific concepts in an easy-to-understand and entertaining manner.
The little white balls are shown as interacting with each other to form different types of bonds and molecules. For example, when two balls come together, they represent the formation of a covalent bond between two atoms. The movement of the balls and their interactions help to illustrate the concepts of chemical reactions, molecular structure, and chemical bonds.
Additionally, the show often uses the little white balls to demonstrate the properties of different elements, such as the boiling points and melting points of different substances, as well as how they react with each other in various chemical reactions.
Learn more about atoms here:
https://brainly.com/question/11166120
#SPJ4
What is the volume charge density rho of the sphere?
Explanation:
The volume charge density, p, is the amount of charge per unit volume of charged object. To calculate the volume charge density of a sphere, you would need to know the total charge on the sphere and the volume of the sphere. Without knowing these values, it is not possible to determine the volume charge density of the sphere.
Charge density per volume is equal to A(Rr) for a sphere with radius R Charge density
What is the plain meaning of volume?The object's capacity is another name for it. The charge every unit volume of a charged item is expressed as p, or volume charge density. You would require to know the sphere's volume and total charge in order to compute the cubic charge density of the sphere.
How can you determine volume by hand?The length, breadth, and height are multiplied by the volume formula. The good news for a cubic is that each of these measures has exactly the same measurement. The length of the any side can therefore be multiplied by three.
To know more about charge visit:
https://brainly.com/question/18750504
#SPJ4
PLEASE HELP!
A gas inside a cylinder expands from 5. 6 L to 9. 2 L at a constant pressure of 3. 7 x 10^3 Pa. What work is involved in this process? REMEMBER! You must convert L to m^3. 1 L = 0. 001 m^3
a) 13,320 J
b) -13. 320 J
c) 13. 3 J
d) -13. 3 J
A gas inside a cylinder expands from 5. 6 L to 9. 2 L at a constant pressure of 3. 7 x 10^3 Pa. The work is involved in this process is 13.3 J> the correct answer is C.
Work performed by a gas at constant pressure is equal to P x V, where P stands for pressure and V for volume change.
ΔV = 9.2 - 5.6 = 3.6 L
3.6 L = 3.6 x 10⁻³ m³
ΔV = 3.6 x 10⁻³ m³
P = 3.7 x 10³ Pa
Therefore, the amount of work done as a gas expands is equal to the product of the gas's pressure and its change in volume.
|w| = PΔV
W= 3.7 x 10³ x 3.6 x 10⁻³ J
= 13.32 J .
The solution is (c), as the gas performs work and results in a good outcome.
Learn more about work
https://brainly.com/question/14721484
#SPJ4
when the temperature of a liquid increases what happens to the viscosity and surface tension of the liquid?
a.viscosity increases, surface tension increases
b. viscosity increases, surface tension decreases
c. viscosity decreases, surface tension decreases
d. viscosity decreases, surface tension increases
The correct answer is: c. Viscosity decreases, surface tension decreases.
The relationship between temperature and the viscosity and surface tension of a liquid is complex and depends on the specific properties of the liquid. However, generally speaking: a. Viscosity decreases, surface tension decreases
As the temperature of a liquid increases, the kinetic energy of its molecules also increases, causing the molecules to move more rapidly and collide more frequently. This results in a decrease in the viscosity of the liquid, as its molecules are less resistant to flow.At the same time, increasing the temperature of a liquid can also decrease its surface tension. This is because the increased kinetic energy of the molecules causes them to move more rapidly, reducing the cohesive forces that hold the liquid together at its surface.
Learn more about Viscosity at : https://brainly.com/question/13385698
#SPJ4
how close is your experimental ratio to the standard conversion factor of 2.54cm/in
It was spot on. 2.54 / 10.16 cm = 4 in C.
What is Length ?
Length is a term used to describe the distance between two points on an object or the dimension of an object along a particular axis. Length is usually measured in units of distance, such as meters, centimeters, inches, or feet.
In physics, length is an important concept used to describe the size of objects, the distance between two points, or the dimensions of a space. In engineering and construction, length is used to design and build structures, such as bridges and buildings, to ensure they are safe and fit for their intended purpose.
To know more about Length , click the given link below ;
https://brainly.com/question/2217700
#SPJ1
The enthalpy of formation of vacancies in pure copper is dh 1⁄4 86.9 kj mol 1. What is the fraction of sites vacant at 1084oc?
Enthalpy of formation of a substance is defined as the change in enthalpy when one mole of a substance is formed from its constituent elements in their standard states. In the case of vacancies in pure copper, the enthalpy of formation is given as 86.9 kJ/mol.
The fraction of sites vacant at a certain temperature can be determined using the Boltzmann distribution law, which states that the fraction of particles in a system with energy E is proportional to e^(-E/kT), where k is the Boltzmann constant and T is the temperature in kelvin.
To find the fraction of vacant sites, we need to calculate the energy required for a vacancy to form, which is given by the enthalpy of formation. We can then use this energy in the Boltzmann distribution equation to find the fraction of sites that are vacant at a given temperature.
At 1084°C, the temperature in kelvin can be calculated as 1084°C + 273.15 = 1357.15 K. Substituting this value and the enthalpy of formation into the Boltzmann distribution equation gives us the fraction of sites that are vacant.
However, this calculation is only a rough estimate and real systems are more complex. Factors such as the presence of impurities, lattice defects, and external influences can affect the fraction of vacant sites and cannot be accounted for by this simple calculation.
Here you can learn more about enthalpy of formation
https://brainly.com/question/28302300#
#SPJ11
g A child bounces a 50 g super ball on the sidewalk. The velocity change of the super bowl is from 20 m/s downward to 18 m/s upward. If the contact time with the sidewalk is 1 800 s, what is the magnitude of the average force exerted on the superball by the sidewalk
The force exerted on the wall is the product of acceleration and mass of the ball. Acceleration of the wall is - 1600 m/s² . The force exerted on the wall is 80 N.
What is force?Force is an external agent acting on an object to change its state of motion or rest. According to Newton' second law of motion, force is the product of acceleration and mass of the object.
Acceleration of a moving object is the rate of change in its velocity.
time = 1/ 800 s
change in velocity = 18 -20 = -2 m/s
acceleration = -2 m/s/ (1/800 s) = - 1600 m/s²
mass of the ball = 50 g = 0.05 kg.
then force = 0.05 kg × -1600 m/s² = - 80 N.
Therefore, the force applied on the wall is 80 N.
Find more on force:
https://brainly.com/question/14110395
#SPJ1
after the dark wand touched the basket, what was the polarity of the basket? did the basket gain or lose electrons during the contact with the dark wand? where did the electrons go (or come from)?
After the dark wand touched the basket, The basket took on a negative charge, the charge was decreased. The dark wand stole electrons from the pail since it had a negative charge.
Charge is a fundamental property of matter that describes the electrical interaction between objects. It is a scalar quantity with units of Coulombs (C) in the SI system. There are two types of charges: positive and negative.
Positive charges have more protons than electrons and are attracted to negative charges. Negative charges have more electrons than protons and are attracted to positive charges. Objects with the same charge will repel each other.
Charge is conserved, meaning that the total charge in a system remains constant, even though the charge distribution can change. This is known as the law of conservation of charge.
Therefore, After the dark wand touched the basket, The basket took on a negative charge, and the charge was decreased. The dark wand stole electrons from the pail since it had a negative charge.
To know more about charge refer to:
brainly.com/question/11944606
#SPJ4
consider the magnetic system of example 1.1. if the coil current is 4 amps when each air gap length is 1 mm, find the flux density in the air gap
The flux density in the air gap of the magnetic system from Example 1.1 can be calculated using the equation B = μ₀N/l, where μ₀ is the permeability of free space (4π × 10⁻⁷ H/m), N is the number of turns in the coil, and l is the length of the air gap.
Using this equation, the flux density in the air gap when the coil current is 4 amps and each air gap length is 1 mm is 0.1 Wb/m².
The flux density in an air gap is determined by the strength of the magnetic field and the size of the air gap. The magnetic field strength is determined by the number of turns in the coil , the current flowing through the coil, and the permeability of the material that the coil is wound around.
Learn more about The flux density:
https://brainly.com/question/16234377
#SPJ4
Why are the tires for trucks carrying gasoline and other flammable fluids manufactured to be electrically conducting? 1. To move the positive charges from the truck to the ground and avoid fire 2. To move the negative charges from the truck to the ground and avoid a fire 3. To make the truck move faster 4. To make the truck easier to drive 5. To neutralize the charges on the trucks?
By the help of static electricity To move the negative charges from the truck to the ground and avoid a fire
The tyres on trucks hauling gasoline and other hazardous substances are engineered to be electrically conductive to prevent static electricity from building up and burning. As the truck moves further, the static electricity created by the tyres' friction with the ground may build up. If static electricity reaches a particular point, it might spark and explode. An explosion is avoided thanks to the tyres' electrical conductivity, which enables the static energy to be dispersed into the ground before it can build up to a harmful level. People transporting combustible materials are safer because the risk of an explosion is lower is drastically decreased by making the tyres conductive.
To learn more about Static Electricity
brainly.com/question/12791045
#SPJ4
How does the distance between the bright fringes depend on the amplitude of the wave?
A) The fringes get farther apart as the amplitude increases.
B) The spacing of the fringes does not change when the amplitude changes (just the brightness changes).
C) The fringes get closer together as the amplitude increases.
Option B. The distance between the bright fringes in an interference pattern is determined by the wavelength of the light being used and the separation of the slits producing the pattern.
The amplitude of the wave does not affect the distance between the bright fringes. Instead, it only affects the brightness of the fringes - as the amplitude increases, the fringes become brighter. In an interference experiment, light from a single source is divided into two waves that then pass through separate slits in an opaque screen and recombine on the other side to produce an interference pattern. The resulting pattern consists of a series of bright and dark fringes, with the spacing between the bright fringes determined by the wavelength of the light and the separation of the slits. The amplitude of the wave affects the brightness of the fringes, but not the distance between them.
To learn more about bright fringes please click on below link.
https://brainly.com/question/14748401
#SPJ4
assuming that the same impulse is transferred from the hammer, does the center-of-mass motion after the collision depend on which cube is struck first?*Yes, the center of mass of the system will move faster in case (b).*No, the center of mass of the system will move with the same velocity in either case.*Yes, the center of mass of the system will move faster in case (a).
The two cubes have different inertias. The cubes are connected to each other by a spring, and a hammer strikes them in the two ways.
Then, b) the center of mass of the system will move with the same velocity in either case.
About the center of massThe center of mass of an object can be known when the difference is thrown, so there will be a point of the object whose motion is like a parabola. For example, if a base ball bat is thrown, the whole point will move. There is a point whose motion is like the motion of a particle, namely parabolic motion. The tip of the beater, which was initially at the bottom when it was at the peak of the movement, was at the bottom.
The tip rotates. But there is a point on the bat that moves like a particle. This point is called the center of mass.
Learn more about center of mass at https://brainly.com/question/29576405.
#SPJ4
basic formula for solar flux
Solar flux is best described by the equation: Solar flux = Irradiance * Area. The "solar constant," or solar flux just outside Earth's atmosphere, has a value of around 1373 W m 2.
Irradiance times the area where: Irradiance (E), which is commonly measured in Watts per square metre (W/m2), is the amount of energy per unit area that falls on a surface.
The area (A), which is expressed in square metres (m2), represents the surface area that is exposed to the sun. The quantity of energy that can be caught by solar panels, the amount of energy that is accessible for solar heating systems, and other uses are all determined using the solar flux formula, which indicates the entire amount of energy that is falling on a certain region. The calculation accounts for both the amount of the sun-exposed surface area and the strength of the solar radiation hitting the ground.
learn more about Solar flux here:
https://brainly.com/question/17748720
#SPJ4
what minimum constant acceleration does the aircraft require if it is to be airborne after a takeoff run of 230 m?
The minimum constant acceleration required for the aircraft to be airborne after a takeoff run of 230 m is 10.9 m/s^2.
We can use the kinematic equation to find the minimum constant acceleration required for the aircraft to be airborne after a takeoff run of 230 m.
The kinematic equation is given by:
v^2 = u^2 + 2as
where
v = final velocity (takeoff velocity)
u = initial velocity (0 m/s, since the aircraft starts from rest)
a = acceleration
s = displacement (230 m)
Since the final velocity of the aircraft must be sufficient to be airborne, we can assume it to be the minimum takeoff velocity, which is typically around 50 m/s.
Substituting the values in the equation, we get:
50^2 = 0^2 + 2as
2500 = 2as
a = 2500 / 2s
a = 2500 / 2 * 230
a = approximately 10.9 m/s^2
So, the minimum constant acceleration required for the aircraft to be airborne after a takeoff run of 230 m is approximately 10.9 m/s^2.
Learn more about acceleration here: brainly.com/question/12550364
#SPJ4
Polyester has properties similar to nylon except it is easily broken down by light and concentrated acid.
polyester shares many characteristics with nylon, it is more easily dissolved by weak and concentrated acids.
What are Polyester?Manufactured fibers can degrade in direct sunlight and melt at lower temperatures than natural fibers, which is a drawback. Textiles or fabrics are made from fibers.
Any fabric or textile created using polyester yarns or fibers is referred to as polyester in general. The term is an abbreviation for a synthetic, man-made polymer that is most frequently known by the name polyethylene terephthalate (PET).
Ethylene glycol and terephthalic acid are combined to create it. All of it may sound very scientific, but polyester is essentially a type of plastic.
Therefore, polyester shares many characteristics with nylon, it is more easily dissolved by weak and concentrated acids.
To learn more about Polyester, refer to the link:
https://brainly.com/question/15704276
#SPJ1
Could you change your samples so that they both have the same amount of total kinetic energy (thermal energy)? how?.
Kinetic energy is a type of power that a moving object or particle possesses.
What is Kinetic energy?An item accumulates kinetic energy when work, which involves the transfer of energy, is done on it by exerting a net force.
A moving object or particle has kinetic energy, which depends on both its mass and its rate of motion. The type of motion can be vibration, rotation on an axis, translation (or travel along a path from one place to another), or any combination of these.
The increase in a particle's mass above that it has at rest multiplied by the square of the speed of light is the definition of relativistic kinetic energy.
Therefore, Kinetic energy is a type of power that a moving object or particle possesses.
To learn more about Kinetic energy, refer to the link:
https://brainly.com/question/26472013
#SPJ1
How much does 68 kilograms weigh in pounds?
The fundamental unit of weight in the measuring units is the kilogram, or kilogramme. It is roughly equivalent to the weight of a water cube that is 10 centimeters in size.
What is the perfect weight for you?
Simply defined, having an optimum body weight means that you have a sleek, healthy physique and are not too thin (underweight) or even too huge (overweight). The best way to find this is to calculate your Bi, or body mass index.
How is a person's weight determined?
Throughout the world, body weight is expressed in kilos, a unit of mass, while in some nations, like the United States, it is measured by pounds or, as in the U.k., in stones and pounds. Even in the U.s, the majority of hospitals today use kilograms for
To know more about weight visit:
https://brainly.com/question/10990268
#SPJ4