Hanz and Franz are in a shooting competition. The object of the match is to be the first to hit the bull's eye of a target 100 feet away. The two opponents alternate turns shooting, and each opponent has a 40% chance of hitting the bull's-eye on a given shot. If Hans graciously allows Franz to shoot first, what is the probability that Hans will win the competition and take no more than three shots? HELP FAST

Answers

Answer 1

The probability of Hans winning the competition and taking no more than three shots is 0.784.

How to find the possibility?

To calculate the probability that Hans wins after taking no more than 3 shots, we can use the cumulative distribution function (CDF) of the binomial distribution.

The CDF gives the probability of getting k or fewer successful shots in n trials, with a success probability of p.

In this case, n = 3, p = 0.4, and k = 2 (since Hans wins if he hits the bull's-eye with 2 shots or fewer).

Using the cumulative binomial distribution formula, the probability of Hans winning the competition and taking no more than three shots is 0.784.

Read more about probability here:

https://brainly.com/question/25870256

#SPJ1


Related Questions

Consider the vector A == Axi + Ayj + Azk. Find the components AhA2' A3 of the vector A in a skewed coordinate system whose axes have directions specified by the following unit vector triad:

Answers

the components of A in this system will be: Ah = Axi1 + Ayj1 + Azk1, A2 = Axi2 + Ayj2 + Azk2, and A3 = Axi3 + Ayj3 + Azk3. To find the components of A in a skewed coordinate system, we first need to express the vector A in terms of the unit vectors of the system.

i = i1i2i3

j = j1j2j3

k = k1k2k3

Ah = Axi1 + Ayj1 + Azk1

A2 = Axi2 + Ayj2 + Azk2

A3 = Axi3 + Ayj3 + Azk3

To find the components of A in a skewed coordinate system, we first need to express the vector A in terms of the unit vectors of the system. The unit vectors of the skewed coordinate system are given by i = i1i2i3, j = j1j2j3, and k = k1k2k3.

Therefore, the components of A in this system will be: Ah = Axi1 + Ayj1 + Azk1, A2 = Axi2 + Ayj2 + Azk2, and A3 = Axi3 + Ayj3 + Azk3.

Learn more about vector here

https://brainly.com/question/15709504

#SPJ4

You drive your Car for 3 hours at an average speed of 130km per hour. How far did you go?
That's my math question I need help on. Thx!!!

Answers

This is quite simple. You just need to multiply. 130 × 3 = 390

Therefore, you would have driven 390 km.

When X has the pdf: f(x) = λe^{-λx}λe^(-λx)λe^-λx for x>0
P(X>x) =
A. 1-λe^{-λx}λe^(-λx)λe^-λx
B. 1-λe^{-λx}λe^(-λx)e^-λx
C. λe^{-λx}λe^(-λx)λe^-λx
D. λe^{-λx}λe^(-λx)e^-λx

Answers

The probability that X is greater than x is P(X>x) = 1-λ[tex]e^{- \lambda x}[/tex]λ[tex]e^{- \lambda x}[/tex]λ[tex]e^{-\lambda x}[/tex]. Thus, option (A) is correct.

What is probability?

Probability is a measure of the likelihood of an event occurring. It is a number between 0 and 1, where 0 indicates that an event is impossible and 1 indicates that an event is certain.

P(X>x) is the probability that X takes on a value greater than x, which means that X is in the tail of the distribution. The cumulative distribution function (CDF) of X, denoted F(x), is defined as F(x) = P(X ≤ x). Since the CDF is a cumulative probability, we can find P(X>x) by subtracting the cumulative probability of X being less than or equal to x from 1:

P(X > x) = 1 - P(X ≤ x) = 1 - F(x)

Now, to find F(x), we can use the cumulative density function (pdf) of X. The pdf of X is given by f(x) = λ [tex]e^{- \lambda x}[/tex] for x > 0. To find the cumulative probability, we need to find the definite integral of the pdf from 0 to x:

F(x) = [tex]\int_0^x \lambda e^{- \lambda x}dx[/tex]

= [tex]-e^{-\lambda x} \int_0^x \lambda de^{\lambda x}[/tex]

= [tex]-e^{-\lambda x}[e^{\lambda x}]_0^x[/tex]

= [tex]-e^{-\lambda x}(e^{\lambda x} - 1)[/tex]

= [tex]1 - e^{-\lambda x}[/tex]

Therefore, the probability that X is greater than x is:

P(X>x) = 1 - F(x) = 1 - (1 - [tex]e^{- \lambda x}[/tex] = [tex]e^{- \lambda x}[/tex]

Hence, the probability that X is greater than x is P(X>x) = 1-λ[tex]e^{- \lambda x}[/tex]λ[tex]e^{- \lambda x}[/tex]λ[tex]e^{-\lambda x}[/tex].

Option (A) is correct.

To learn more about the probability, visit:

brainly.com/question/24756209

#SPJ4

the picture. please answer it

Answers

Answer:5  pounds, and x+y pounds.

Step-by-step explanation:

3 pounds + 2 pounds would equal 5 pounds ,and x pounds plus y pounds are veriables, and we do not have information on how to solve for them, so the answer would just be x pounds plus y pounds.

Step-by-step explanation:

1. If Jaxson buys 2 pounds of kiwi and 3 pounds of raspberries, he buys a total of 2 + 3 = 5 pounds of fruit.

2.If he buys a pounds of kiwi and 7 pounds of raspberries, he buys a total of a + 7 = a + 7 pounds of fruit.

what will always be a solution to a homogenous set of equations

Answers

Homogeneous systems of linear equations can have either a unique solution or infinitely many solutions, depending on the rank of the matrix representing the system.

A homogeneous set of equations is a set of linear equations that has a trivial solution (that is, a solution consisting of only the zero vector). In other words, if the coefficients of the variables in a set of linear equations are all equal to zero, the set of equations is considered homogeneous.

The trivial solution, that is, the solution in which all variables are equal to zero, will always be a solution to a homogeneous set of equations. This is because, if all coefficients are equal to zero, then each equation in the set will reduce to 0 = 0, which is always true. Thus, the trivial solution is always a solution to a homogeneous set of equations.

In addition to the trivial solution, a homogeneous set of equations may also have non-trivial solutions, which are solutions that are not equal to only the zero vector. To find these non-trivial solutions, we typically use techniques such as Gaussian elimination, row reduction, or the use of matrices and determinants.

It is important to note that homogeneous systems of linear equations can have either a unique solution or infinitely many solutions, depending on the rank of the matrix representing the system.

Therefore, homogeneous systems of linear equations can have either a unique solution or infinitely many solutions, depending on the rank of the matrix representing the system.

To learn more about linear equations,

Visit; brainly.com/question/11897796

#SPJ4

for the same frame, complete the free-body diagram of the system abc by adding the forces that act on it.

Answers

The total force acting on the system ABC. The total force is equal to the sum of the force of gravity, normal force, friction force, tension force and applied force (Ftotal = Fg + FN + Ff + T + Fapp).

The force of gravity (Fg) acts on the system in the downward direction. This force is equal to the mass of the body multiplied by the acceleration due to gravity (Fg = mg).

The normal force (FN) is the force that acts perpendicular to the surface on which the body is resting. This force is equal to the weight of the body multiplied by the coefficient of friction between the body and the surface (FN = m * g * μ).

The force of friction (Ff) is the force that acts in the opposite direction of the motion of the body. This force is equal to the coefficient of friction multiplied by the normal force (Ff = μ * FN).

The tension force (T) is the force exerted by a string or a cable on the body. This force is equal to the mass of the body multiplied by the acceleration due to the applied force (T = m * a).

The applied force (Fapp) is the force that is applied to the body by an external force. This force is equal to the mass of the body multiplied by the acceleration due to the applied force (Fapp = m * a).

By combining all of these forces, we can determine the total force acting on the system ABC. The total force is equal to the sum of the force of gravity, normal force, friction force, tension force and applied force (Ftotal = Fg + FN + Ff + T + Fapp).

Learn more about sum of the force here:

https://brainly.com/question/25521104

#SPJ4

Complete question:

What is the free-body diagram of the system ABC?

What is x + y + z if [tex]\frac{x}{4-x} = \frac{y}{5-y} = \frac{z}{6-z} = 2[/tex]

A. 8
B. 10
C. 16
D. 6

Answers

Step-by-step explanation:

DISCUSSION QUESTIONS (DQ's).

1. Is division always a negative in a religious faith? Why or why not?

sum of independent negative binomial random variable and geometric random variable

Answers

The sum of independent negative binomial and geometric random variables does not have a closed-form distribution and must be computed numerically.

What is binomial random variable ?

In probability theory and statistics, the binomial distribution with parameters n and p is the discrete probability distribution of the number of successes in a sequence of n independent experiments, each asking a yes–no question, and each with its own Boolean-valued outcome: success or failure.

Let X be a negative binomial random variable with parameters r and p, and let Y be a geometric random variable with parameter q. The sum Z = X + Y is also a random variable.

The cumulative distribution function (CDF) of Z is given by:

F_Z(z) = P(Z <= z) = P(X + Y <= z) = ∑_{x=0}^{z} P(X = x) * P(Y = z - x)

This expression is a double sum and does not have a closed-form solution, but it can be computed numerically.

Alternatively, the probability mass function (PMF) of Z can be found by counting the number of ways that X and Y can take on their respective values, and summing up their joint probabilities:

f_Z(z) = P(Z = z) = ∑_{x=0}^{z} P(X = x) * P(Y = z - x)

The sum of independent negative binomial and geometric random variables does not have a closed-form distribution and must be computed numerically.

To learn more about binomial random variable visit : brainly.com/question/14282621

#SPJ4

Find the equation of the line passing through (-8,3) and (-6, 7). Write your equation in point-slope AND slope-intercept forms. Use the first point in your point-slope form!
point-slope form:
slope-intercept form:

Answers

Answer:

point-slope form: y - 3 = 2(x+8)

slope-int form: y = 2x + 19

Step-by-step explanation:

For slope-int form, find the slope of the line.  

7-3 / -6-(-8) = 4/2 = 2

This becomes y = 2x + b

To find b: plug in a y-coordinate for the y in the equation and plug in an x-coordinate for the x

7 = 2(-6) + b

7 = -24/2 + b

7 = -12 + b

7 + 12 = -12 + 12 +b

19 = b

The final equation is: y = 2x + 19

clay made 4/5 of a pound of a trait mix if he puts 2/5 of a pound into each bag how many bags can clay fill

Answers

Answer: 2 bags

Step-by-step explanation:

To determine the number of bags Clay can fill, we need to divide the total amount of the trail mix by the amount of trail mix in each bag.

First, we'll convert the amounts to a common denominator of fifths:

4/5 of a pound of trail mix is 4/5 * 5/5 = 4 fifths

2/5 of a pound is 2/5 * 5/5 = 2 fifths

Now, we can divide the total amount of trail mix by the amount in each bag:

4 fifths ÷ 2 fifths/bag = 2 bags

So, Clay can fill 2 bags with 2/5 of a pound of trail mix each.

what is the volume of the solid generated when the region in the first quadrant bounded by the graph of y=44−x2−−−−−√ and the x- and y-axes is revolved about the y-axis?

Answers

The volume of the solid generated is [tex]\pi (2/3) (44)^{3/2}.[/tex]

We have,

To find the volume of the solid generated by revolving the region in the first quadrant bounded by the graph of y = √(44 - x²) and the x- and y-axes about the y-axis, we can use the method of cylindrical shells.

The volume can be calculated using the following integral:

V = ∫[a,b] 2πx f(x) dx

where [a, b] is the interval of x-values that defines the region in the first quadrant.

In this case, the curve y = √(44 - x²) intersects the x-axis when y = 0, which gives us:

0 = √(44 - x²)

Squaring both sides and solving for x, we get:

x² = 44

x = ±√44

Since we're considering the region in the first quadrant, we take the positive square root:

x = √44 = 2√11

Now we can set up the integral:

V = ∫[0, 2√11] 2πx (√(44 - x²)) dx

Simplifying the integrand:

V = 2π ∫[0, 2√11] x (√(44 - x²)) dx

To evaluate this integral, we can make the substitution u = 44 - x²,

du = -2x dx:

V = 2π ∫[0, 44] (√u) (-du/2)

V = -π ∫[0, 44] (√u) du

Integrating:

V = -π [2/3 u^(3/2)] [0, 44]

V = -π [2/3 (44)^(3/2) - 0^(3/2)]

V = -π (2/3) (44)^(3/2)

Finally, taking the absolute value and simplifying:

V = π (2/3) (44)^(3/2)

So, the volume of the solid generated is π (2/3) (44)^(3/2).

Thus,

The volume of the solid generated is [tex]\pi (2/3) (44)^{3/2}.[/tex]

Learn more about the volume of solids here:

https://brainly.com/question/23705404

#SPJ6

Need help please on this

Answers

The line has an equation y = 0.03x + 20, with a slope of $0.03 per GB and the y intercept of $20.

What is an equation?

An equation is an expression that shows the relationship between two or more numbers and variables. An equation can either be linear, quadratic, cubic and so on

The slope intercept form of a linear equation is:

y = mx + b

where m is the rate of change and b is the y intercept

Let y represent the total cost of buying x gigabyte of data

The line passes through the point (0, 20) and (2000, 80). Hence:

[tex]y-y_1=\frac{y_2-y_1}{x_2-x_1} (x-x_1)\\\\substituting:\\\\y-20=\frac{80-20}{2000-0} (x-0)\\\\y = 0.03x + 20[/tex]

The slope is 0.03 and the y intercept of the line is 20.

The second line passes through the point (0, -2) and (-2, -5). Hence:

[tex]y-y_1=\frac{y_1-y_1}{x_2-x_1} (x-x_1)\\\\substituting:\\\\y-(-2)=\frac{-5-(-2)}{-2-0} (x - 0)\\\\y=1.5x-2[/tex]

The equation of the line is y = 1.5x + 1 and y = 1.5x - 2

Find out more on equation at: https://brainly.com/question/2972832

#SPJ1

Exponential Functions

Answers

In the exponential function y = 3 × q⁵ the starting value is 3.

What is an exponential function?

The formula for an exponential function is f(x) = aˣ, where x is a variable and a is a constant that serves as the function's base and must be bigger than 0.

The given exponential function is -

y = 3 × q⁵

The exponential function is written in the form abˣ.

Here, a is considered to be the initial value, b is considered to be the base and x represents the growth factor.

So, the initial or starting value in function y = 3 × q⁵ is -

a = 3

Therefore, the starting value is 3.

To learn more about exponential function from the given link

brainly.com/question/12626186

#SPJ1

Profeor Smart i teaching her tudent how the formula for the area of a circle wa derived

Answers

The area of circle can be calculated by using the formulas: Area = π x r2, in terms of radius 'r'. Area = (π/4) x d2,

State area  of circle?

The area of a circle is pi times the radius squared (A = π r²). Learn how to use this formula to find the area of a circle when given the diameter.

Area = length x breadthArea = l × b. Area = π × radius × radiusArea = π × r2(π = 3.14) Using these formulas, area for different quadrilaterals (a special case of polygons with four sides and angles ≠ 90o) is also calculated. Application.

We know that the general equation for a circle is ( x - h )^2 + ( y - k )^2 = r^2, where ( h, k ) is the center and r is the radius.

The area is measurement of the surface of a shape. To find the area of a rectangle or a square you need to multiply the length and the width of a rectangle or a square. Area, A, is x times y.

To learn more about circle refers to:

https://brainly.com/question/26594685

#SPJ4

Work out the area of a rectangle with base,
b
= 14mm and height,
h
= 10mm.

Answers

Answer:

70mm

Step-by-step explanation:

(14*10)/2=70

Height and Width multiplied against each other divided by two is the area of a triangle

a data analyst creates a scatterplot with a lot of data points. it is difficult for the analyst to distinguish the individual points on the plot because they overlap. what function could the analyst use to make the points easier to find? 1 point geom line() geom jitter() geom point() geom bar()

Answers

The analyst could use the geom_jitter() function to make the points easier to find.

What is data analyst ?

Analytics is the systematic computational analysis of data or statistics. It is used for the discovery, interpretation, and communication of meaningful patterns in data.

The function geom_jitter() can help to resolve this issue by randomly offsetting the x and y position of each point. By adding a small amount of "jitter" to each point, the overlap is reduced and the individual data points become more visible. In ggplot2 library, which is a popular plotting library in R, geom_jitter() is used as a layer in a plotting pipeline to add jitter to a scatterplot.

To use geom_jitter(), you will first create a scatterplot using the geom_point() function, then add a geom_jitter() layer to it. This will apply the jitter to the points and improve their visibility. For example, in ggplot2 the following code would create a scatterplot with jittered points:

ggplot(data, aes(x=x, y=y)) +

 geom_jitter() +

 geom_point()

The analyst could use the geom_jitter() function to make the points easier to find.

To learn more about data analyst visit : brainly.com/question/28893491

#SPJ4

The analyst could use the geom_jitter() function to make the points easier to find.

Analytics is the systematic computational analysis of data or statistics. It is used for the discovery, interpretation, and communication of meaningful patterns in data.

The function geom_jitter() can help to resolve this issue by randomly offsetting the x and y position of each point. By adding a small amount of "jitter" to each point, the overlap is reduced and the individual data points become more visible. In ggplot2 library, which is a popular plotting library in R, geom_jitter() is used as a layer in a plotting pipeline to add jitter to a scatterplot.

To use geom_jitter(), you will first create a scatterplot using the geom_point() function, then add a geom_jitter() layer to it. This will apply the jitter to the points and improve their visibility. For example, in ggplot2 the following code would create a scatterplot with jittered points:

ggplot(data, aes(x=x, y=y)) +

geom_jitter() +

geom_point()

The analyst could use the geom_jitter() function to make the points easier to find.

To learn more about data analyst

brainly.com/question/28893491

#SPJ4

Shortly after takeoff, an airplane is climbing 250 feet for every 1000 feet it travels. Estimate the airplanes climb angle while this is happening.

Answers

Answer: The estimate of the airplane's climb angle while climbing 250 feet for every 1000 feet it travels is approximately 14°

Step-by-step explanation:

The climb angle of an airplane can be estimated using the tangent of the rise over the run. To do this, you need to know the rise (the vertical distance the airplane is climbing) and the run (the horizontal distance the airplane is traveling).

In this case, the rise is 250 feet and the run is 1000 feet. The tangent of the angle is the rise divided by the run:

tan(angle) = rise / run = 250 / 1000 = 0.25

To find the angle in degrees, you need to take the inverse tangent (arctan) of 0.25:

angle = arctan(0.25) = 14.0°

So, the estimate of the airplane's climb angle while climbing 250 feet for every 1000 feet it travels is approximately 14°.

please convert the following decimal numbers to binary numbers: (to receive full credit, you must show how you reach your answers. 1 point each, total 5 points): 1) 13 2) 121 3) 252 4) 1023 5) 2049

Answers

Answer:

1101 1111001111111001111111111100000000001

Step-by-step explanation:

2/13=6 reminder 1

2/6= 3 reminder 0

2/3= 1 reminder 1

2/1= 0 reminder 1

13 becomes 1101 base two/ binary form

The conversion of number from decimal to binary:

[tex](13)_{10}=(1101)_{2}[/tex]

[tex](121)_{10}=(1111001)_{2}[/tex]

[tex](252)_{10}=(11111100)_{2}[/tex]

[tex](1023)_{10}=(1111111111)_{2}[/tex]

[tex](2049)_{10}=(100000000001)_{2}[/tex]

Recursively multiplying the given decimal number by two is one way to convert a decimal number to a binary number. The remainders are then recorded until we arrive at 0 as the final quotient. The remainders are then entered in reverse order to obtain the binary equivalent of the provided decimal number.

The number is 13.

13 ÷ 2 = 6, Remainder = 1

6 ÷ 2 = 3, Remainder = 0

3 ÷ 2 = 1, Remainder = 1

1 ÷ 2 = 0, Remainder = 1

So, [tex](13)_{10}=(1101)_{2}[/tex]

The number is 121.

121 ÷ 2 = 60, Remainder = 1

60 ÷ 2 = 30, Remainder = 0

30 ÷ 2 = 15, Remainder = 0

15 ÷ 2 = 7, Remainder = 1

7 ÷ 2 = 3, Remainder = 1

3 ÷ 2 = 1, Remainder = 1

1 ÷ 2 = 0, Remainder = 1

So, [tex](121)_{10}=(1111001)_{2}[/tex]

The number is 252.

252 ÷ 2 = 126, Remainder = 0

126 ÷ 2 = 63, Remainder = 0

63 ÷ 2 = 31, Remainder = 1

31 ÷ 2 = 15, Remainder = 1

15 ÷ 2 = 7, Remainder = 1

7 ÷ 2 = 3, Remainder = 1

3 ÷ 2 = 1, Remainder = 1

1 ÷ 2 = 0, Remainder = 1

So, [tex](252)_{10}=(11111100)_{2}[/tex]

The number is 1023.

1023 ÷ 2 = 511, Remainder = 1

511 ÷ 2 = 255, Remainder = 1

255 ÷ 2 = 127, Remainder = 1

127 ÷ 2 = 63, Remainder = 1

63 ÷ 2 = 31, Remainder = 1

31 ÷ 2 = 15, Remainder = 1

15 ÷ 2 = 7, Remainder = 1

7 ÷ 2 = 3, Remainder = 1

3 ÷ 2 = 1, Remainder = 1

1 ÷ 2 = 0, Remainder = 1

So, [tex](1023)_{10}=(1111111111)_{2}[/tex]

The number is 2049.

2049 ÷ 2 = 1024, Remainder = 1

1024 ÷ 2 = 512, Remainder = 0

512 ÷ 2 = 256, Remainder = 0

256 ÷ 2 = 128, Remainder = 0

128 ÷ 2 = 64, Remainder = 0

64 ÷ 2 = 32, Remainder = 0

32 ÷ 2 = 16, Remainder = 0

16 ÷ 2 = 8, Remainder = 0

8 ÷ 2 = 4, Remainder = 0

4 ÷ 2 = 2, Remainder = 0

2 ÷ 2 = 1, Remainder = 0

1 ÷ 2 = 0, Remainder = 1

So, [tex](2049)_{10}=(100000000001)_{2}[/tex]

To learn more about decimal to binary link is here

brainly.com/question/19802955

#SPJ4

For each of the examples below, identify the bearing of D from C.
a)
250°
N
110°
D
b)
145°
D
N
C
215°
Not drawn accurately

Answers

a) The bearing of D from C is 250.

b) The bearing of D from C is 145.

What is Bearing in Angle?

Angles are measured in bearings clockwise from north. The direction of north must be identified before taking a bearing measurement. The math exam question will typically include this north direction. The required angle is then measured in a clockwise fashion.

Given:

a) 250°N, 110°D

As, we know that Bearings are angles, measured clockwise from north. To measure a bearing, we must first know which direction is north.

So, the bearing of D from C is 250.

b) The bearing of D from C in second case is 145.

Learn more about Bearing in Angle here:

https://brainly.com/question/29250638

#SPJ1

The variable whose effect on the response variable is to be assessed by the experimenter.

Answers

In an experiment, the variable being measured or tested is known as the dependent variable.

What is dependent variable?Any variable whose value depends on an independent variable is said to be dependent. The thing being measured in an experiment or assessed in a mathematical equation is the dependent variable. Sometimes the dependent variable is referred to as "the result variable." A dependent variable is one that depends on the value of another variable in an expression. As an illustration, if y = 2x, then y relies on x Consequently, y Equals 2 if x = 1. The independent variable is the one whose value is unrelated to the other variables. The dependent variable is the one whose value depends on the independent variable. When the same line is written in two different ways so that there are infinite solutions, an equation system is referred to as dependent.

To learn more about dependent variable, refer to:

https://brainly.com/question/25223322

#SPJ4

Joseph has a bag filled with 3 red, 3 green, 15 yellow, and 9 purple marbles. Determine P(not red) when choosing one marble from the bag.

10%
30%
50%
90%

Answers

Answer: 90%

Step-by-step explanation: To find the probability of not choosing a red marble, we need to calculate the total number of marbles in the bag and subtract the number of red marbles. The total number of marbles is 3 red + 3 green + 15 yellow + 9 purple = 30. So, the probability of not choosing a red marble is P(not red) = (30 - 3) / 30 = 27 / 30 = 9 / 10=90/100=90%

A population has u = 80 and a standard deviation of o = 5. 2. What are the mean and standard deviation of the sampling distribution

& if a sample of 100 were taken? (2 points)

CH-80,02 -0. 52

CH-80,0 -0. 052

H-80,0 - 5. 2

H-80,0 - 52

H-80. 0 - 520

Answers

The mean of the sampling distribution is 80 and the standard deviation is 0.52.

What is Normal Distribution?

A normal distribution in statistics is defined as the type of continuous probability distribution where the data are arranged in a symmetrical bell shaped graph.

Given that,

Population mean, μ = 80

Population standard deviation, σ = 5.2

Mean of a sampling distribution in a normally distributed sample is same as the population mean and the standard deviation of the sampling distribution = σ / √n, where n is the sample size.

Sample size, n = 100

Mean of the sampling distribution = 80

Standard deviation of the sampling distribution = 5.2 / √100 = 5.2/10 = 0.52.

Hence mean and the standard deviation of the sampling distribution is 80 and 0.52 respectively.

Learn more about Normal Distribution here :

https://brainly.com/question/29509087

#SPJ1

i need help with thus..

Answers

Answer: -35/18

Step-by-step explanation: Hello!

The main thing that you need to know when dividing fractions is what the reciprocal is. Here is an example of finding the reciprocal:

1/2 divided by 2/3 = 1/2 x 3/2.

Basically, you flip the second fraction upside down (Put the number under the fraction line over the fraction line and put the number above the fraction line under the fraction line).  Then, you multiply the two fractions.  Then, you will find the answer.  Here is how to do that with the problem you have:

5/3 divided by (-6/7) = ?

After finding the reciprocal, you would get:

5/3 x (-7/6)

To find the answer, multiply the numerators together (5 and -7) and the denominators (3 and 6) together.

For the new numerator, you get -35.  For the new denominator, you get 18.  Put the new numerator above the fraction line and the new denominator below the fraction line.

The answer is:

-35/18

How do we solve this’!???

Answers

Answer:

n=32 That's all and the stepss

A bicycle store costs $4000 per month to operate. The store pays an average of $50 per bike. The average selling price of each bicycle is $150. How many bicycles must the store sell each month to break even

Answers

Answer:27

Step-by-step explanation:

                                                                                   

Answer:

The store would need to sell 40 bikes to break even.

Step-by-step explanation:

In order to break even the store needs to make $4000 a month. They spend $50 per bike and sell them for $150, an easy equation to get their profit per bike is to subtract how .uch they pay for a bike from how much they make per bike which is $150-50=$100. So now we just need to divide $4000 by $100 to find out how many bikes they need to sell. $4000÷$100=40.

An archer is able to hit the bull's-eye 49% of the time. If she shoots 10 arrows, what is the probability that she gets exactly 4 bull's-eyes? Assume each shot is independent of the others.
a. 0.1267
b. 0.2130
c. 0.7870
d. 0.0010
e. 0.0576

Answers

Probability of hitting bull's eye exactly 4 time sin 10 arrows is 0.213

What is Probability ?

The area of mathematics known as probability deals with numerical representations of the likelihood that an event will occur or that a statement is true. An event's probability is a number between 0 and 1, where, broadly speaking, 0 denotes the event's impossibility and 1 denotes certainty.

Properties of Probability:

Phi or a null set is the probability of an impossibly unlikely event.Its sample space represents an event's highest probable probability.Any occurrence has a probability between 0 and 1. A probability can also be zero (0).An event's probability cannot be negative.The chance of A or B happening is equal to the probability of A plus the probability of B if A and B are two outcomes that cannot both occur simultaneously.

The probability of hitting a bull's Eye is 49% = 49/100 = 0.49

The probability of not hitting a bull's Eye is = 1- 0.49 = 0.51

Probability of hitting bull's Eye 4 times = (0.49)⁴

Probability of not hitting Bull's eye 6 times = (0.51)⁶

The total number of combinations possible with 10 sets are ¹⁰C₄.

Probability of hitting bull's eye 4 time sin 10 arrows is

¹⁰C₄*(0.49)⁴*(0.51)⁶ = 0.213

To learn more about Probability refer to :

https://brainly.com/question/30034047

#SPJ4

also this one would help me out alot

Answers

The line that connects the coordinates (7,5) and (9,5) has the equation y = 5.

What is coordinates?A point or shape's location in a two-dimensional plane can be found using coordinates, which are a pair of numbers. The terms "x-coordinate" and "y-coordinate" are used to define a point's location on a 2D plane. A group of values that exhibit precise positioning On graphs, it is typically represented by a pair of numbers: the first number indicates the length along, while the second number indicates the length up or down. The point (12,5), for instance, is 12 units down and 5 units up. In order to determine a point's coordinates in a coordinate system, you must do the opposite.

Due to the fact that the slope of the line across the two points (x1, y1) and (x2, y2) [tex]$\mathrm{m}=\frac{\mathrm{y}_2-\mathrm{y}_1}{\mathrm{x}_2-\mathrm{x}_1}$[/tex] Now, as shown below, we can determine the slope of the line through points (7,5) and (-9,5):

[tex]$\mathrm{m}=\frac{5-5}{-9-7}=\frac{0}{-16}=0[/tex]

As a result, the line's slope is o.

Find the y-intercept now by using the slope and one of the two points.

y = mx + b

5 = (0)(7) + b

b = 5

Equation in slope intercept form is written as follows:

y = mx + b

y = (0)x + 5

y = 5

Consequently, y = 5 is the line's equation.

The complete question is:

Find the equation of the line that passes through the points (7,5) and (−9,5)

To learn more about coordinate, refer to:

https://brainly.com/question/20935031

#SPJ1

The slope of the line given by the coordinates of two points (x1, y1) = (-7, 5) and (x2, y2) = (-7, 9) is undefined. The slope of the line for coordinates (2, 3) and (2, -3) is undefined.

What is slope of the line?

A line's slope in mathematics is defined as the ratio of the change in the y coordinate to the change in the x coordinate.

Both the net change in the y-coordinate and the net change in the x-coordinate are denoted by y and x, respectively.

Given that,

The coordinates of two points are:

(x1, y1) = (-7, 5) and

(x2, y2) = (-7, 9).

The slope of the line is given by the following equation:

m = (y2 - y1) / (x2 - x1)

Substituting the value of the given coordinates we have:

m = (9 - 5) / (-7 - (-7))

m = (4)/ -7 + 7 = undefined

The slope of the line given by the coordinates of two points (x1, y1) = (-7, 5) and (x2, y2) = (-7, 9) is undefined.

Similarly, for the coordinates (2, 3) and (2, -3):

m = (y2 - y1) / (x2 - x1)

m = (-3 -3) / (2 - 2)

m = undefined.

Hence, the slope of the line for coordinates (2, 3) and (2, -3) is undefined.

Learn more about slope here:

https://brainly.com/question/11559942

#SPJ1

Claudia is walking at a constant speed in front of a motion sensor. After 1 s she is 2. 5 m from the sensor. 2s later and she is 4. 0 m from the sensor. Find the equation in the form d=mt+b that describes her motion

Answers

The distance is 5.5 meters from the sensor.

Distance is the sum of an object's movements, regardless of direction. Distance may be defined as the amount of space an item has covered, regardless of its beginning or finishing position.

Let us assume that d means distance and t means time.

When t = 1, d = 2.5

When t = 3, d = 4

d = mt + b

2.5 = m + b [t = 1]

4.0 = 3m + b [t = 2]

1.5 = 2m [subtract]

m = .75 = slope

b = 1.75 = d-intercept

d = .75t + 1.75

d = 15/4 + 7/4 [t = 5]

d = 22/4 = 5.5 m from sensor

Thus, the distance is 5.5 meters from the sensor.

To know more about distance visit: brainly.com/question/15172156

#SPJ4

let f(x) be a function with domain double-struck r. (a) show that e(x) = f(x) f(−x) is an even function. (simplify your answers completely.) e(x) = f(x) f(−x)

Answers

The given equation e(x)=f(x)f(-x) is an even function since e(x)=e(-x) and f(x)^2=f(-x)^2.

let f(x) be a function with domain double-struck r. (a) show that e(x) = f(x) f(−x) is an even function. (simplify your answers completely.) e(x) = f(x) f(−x) = f(x) f(x) = f(x)^2 e(x) = f(x)^2

e(x) = e(-x) Therefore, e(x) is an even function.

(-x) is an even function, we need to show that e(x)=e(-x).

We start by replacing -x with x in the equation:

e(x)=f(x)f(-x)

e(x)=f(x)f(x)

e(x)=f(x)^2

Now, we replace x with -x in the equation:

e(-x)=f(-x)f(-x)

e(-x)=f(-x)^2

Since the left-hand side of both equations are the same (e(x)=e(-x)), and the right-hand sides of both equations are the same (f(x)^2=f(-x)^2), we can conclude that e(x) is an even function.

The given equation e(x)=f(x)f(-x) is an even function since e(x)=e(-x) and f(x)^2=f(-x)^2.

Learn more about equation here

https://brainly.com/question/29657992

#SPJ4

Why do fractions need to have a common denominator before you add or subtract them? Tell me in the comments below

Answers

Explanation: Fractions must have a common denominator to add or subtract because if you think of pieces of a pizza, if you split one pizza into quarters and one into fifths, then each piece won't be the same size, so 1/5 isn't equivalent to 1/4. Therefore, if you subtract or add fractions you need to find a common denominator. One easy way to find a common denominator is list out the multiples of the two (or more) denominators and find the LCM (Least common multiple). Then find the quotient of the LCM divided by the denominator, and multiply that number by the numerator, and you have successfully changed your fraction to an equivalent fraction with a different denominator. Hope this helped. Please vote me brainliest.

Other Questions
as one of only a handful of states without a form of an income tax, what is the only way that texas could institute an income tax statewide? You want to buy a pet iguana. You already have $12 and plan to save $9 per week. A. If w represents the number of weeks until you enough Mooney to buy the iguana, what equation represents your plan to afford the iguana?B. Explain how you could set up an equation to find the amount of money you should save each week to buy the iguana in 6 weeks. Write three or more questions that you still have about an organism's genotype, phenotype, and/or alleles. Your questions should be ones that can be researched or tested through investigations. Avoid asking questions that lead to yes and no answers. Then, cite specific statements, quotations, or data in the Article and the Dig Deeper that motivated you to ask each of your questions what does the mnemonic rows stand for? Nvm Ill just fail lol How did the Marshall Court strengthened the federal government? 5) you have a coffee maker with a heating element that is equal to 20 ohms designed for a working voltage of 120 vac. the coffee maker holds 0.5 liters, and plugs into the standard 120 vac outlet ( fig. 7 below ). a) determine how long it will take to boil the 0.5 liters of water from 20 degrees c to 100 degrees c. b) assume that you pay 15 cents / kwh, how much does it cost to boil your water??? it takes 4.184 joules of energy to raise the temperature of 1 gram of water 1 degree celsius. one liter of water weighs 1000 grams (FILL IN THE BLANK) _______is a barrier separating the cells genetic information from the cells cytosol Americans tend to forget that the nation's first settlements were towns, and that thefor a steady 6 percent to 7 percent of the population, before the urban share beganurban population kept pace with the rural population in the early 19th century, accountingtowns, with streets laid out in checkerboards awaiting the new arrivals. However, theto spurt ahead. The settlement of the West in the 19th century was structured around20th century saw the completion of America's transformation into an urban population.In 1900, 40 percent of the population lived in urban areas; by 1990, 75 percent did.Urban growth over the 20th century took place in cities of all sizes. In 1900, 8.5 percentlived in communities with 2,500 to 25,000 people. Three cities had over 1 million pof the population lived in a city of 1 million or more inhabitants, while nearly 14 percent1900: New York (3.4 million), Chicago (1.7 million), and Philadelphia (1.3 million).people inGuiding Question: What clues does this text provide about the growth of mid-sized cities in the late 19th century andover the 20th century? Which of following are true about the advantages and disadvantages of being a franchise owner:Having a nationally recognized name for your business in a franchise can help with marketing and awareness,While the upfront costs of a franchise may be steep, a franchise has a better chance of succeeding than starting a business from scratch find the 20th term of the A.p 3,6,9 The only ones not bailing were Seor Castillo, who looked like a ghost - Refugee #Page 153 meaning 60 is 5 times as great as 12 write the equation Please answer A B C D Question(0)Question 1Select two reasons for using containers to deploy applications. (Choose 2 responses.)1 pointIt creates consistency across development, testing, and production environments.It provides tight coupling between applications and operating systems.Allocating resources in which to run containers is not necessary.Migrating workloads is simpler. What is the length of WY? the ability of a nonpathogen or weakly pathogenic microorganism to cause disease primarily in an immunocompromised host is termed NEED HELP WITH CHEMISTRY ASAP (question most volcanism in the world is associated with.A Plate boundariesB Midcontinental hot spotsC - FaultingD - Aquifer depletionE Desertification which statement about gastrointestinal microbes is false?