a neutral metal sphere is touched to a negatively charged metal rod. As a result the sphere will be_____ and the metal rod will be ________ . Fill in the gaps
a. positively charger. b.negatively charger. c. neutral. d. none

Answer:

6n

Explanation:

Given:

Force acting by student 1 = 10 N

Force acting by student 2 = 4 N

Find:

Net force acting on the board

Computation:

Net force acting on the board = Force acting by student 1 - Force acting by student 2

Net force acting on the board = 10 N - 2 N

Net force acting on the board = 6 N

As a positively charged glass rod is brought near the knob of the electroscope, the separation of the leaves will increase.

What is Charge?

Charge is a fundamental property of matter that determines how objects interact with each other through the electromagnetic force. It is a physical property that can be positive or negative and can be measured in coulombs (C).

This is because the positively charged glass rod will induce a negative charge on the metal knob of the electroscope. The negative charges will repel the electrons in the metal leaves, causing them to move away from each other and increasing their separation. The greater the amount of charge on the glass rod, the greater the separation between the leaves will be.

Learn more about Charge from given link

https://brainly.com/question/18102056

#SPJ1

The fireman's hose is pointed vertically upwards at a height of 1.5 m above the ground and a stream of water is coming from it. When the water is shut off, the noise of the water hitting the ground continues for another 2.0 s, the speed of the water as it left the hose is  4.31 m/s.

A firefighter, also known as a fireman or firewoman, is a professional who is trained and equipped to put out fires, rescue people and animals from dangerous situations, and manage other emergency situations.

The water comes to rest after it reaches the ground, so it moves at constant acceleration in the vertical direction. Since the final velocity is zero, the initial velocity and the displacement can be used to calculate the time of flight.

The speed at which the water left the hose can then be determined using the time of flight and the height of the hose above the ground.

Initial velocity = v₀, Final velocity = vf = 0.

Displacement = h = 1.5 m

Acceleration = a = g = 9.8 m/s²

Time of flight = t

Using the formula ,vf = v₀ + at₀ = v₀ + gt

v₀ = -gt

displacement = v₀×t + 1/2×at²

h = -1/2 × gt²

t = sqrt(2h/g) = sqrt(2(1.5)/9.8) = 0.44 s.

Using the formula, vf = v₀ + at

vf = 0 + gtvf = 9.8 × 0.44 = 4.31 m/s.

The water's speed as it leaves the hose is 4.31 m/s.

Read more about speed here:

https://brainly.com/question/27888149

#SPJ11

Answer:

Define local action and polarization.How do they make their cell defective?​

Explanation:

Local action is a principle in physics that describes how a particle or object interacts with another object that is nearby, without the need to consider transients that occur over long distances. This means that the influence of one object on another rapidly decreases as the distance between them increases. Local action is a fundamental assumption in quantum physics and general relativity, and it is essential for understanding many physical phenomena.

Polarization is a phenomenon that occurs when a transverse wave, such as an electromagnetic wave, oscillates in a specific plane. This means that the direction of the wave's electric field changes with time, but always remains in the same plane. Polarization is important in many applications, such as optics, where the polarization of light can be used to control the intensity and direction of light. Furthermore, polarization is fundamental in particle physics, where subatomic particles have an intrinsic polarization that can be measured in experiments.

An electromagnet's strength can be increased by any of the following methods: By putting a low-permeability core in the coil, by increasing the number of turns of wire, and by increasing voltage.

An electromagnet is a device that uses electricity to generate a magnetic field. Electromagnets are used in a variety of applications, including speakers, motors, and generators. Electromagnets can be used in many ways because their magnetic field can be easily controlled by changing the electric current flowing through them.

The strength of an electromagnet is determined by the number of turns of wire in the coil and the amount of current flowing through the wire. Increasing the number of turns of wire will increase the magnetic field strength of the electromagnet. Also, a low-permeability core in the coil can increase the magnetic field strength of the electromagnet. Permeability is the ability of a material to be magnetized. The core can concentrate the magnetic field, increasing the strength of the magnetic field. Finally, increasing the voltage applied to the electromagnet will increase the magnetic field strength.

The complete question is:

"The strength of an electromagnet is increased by _____

putting a low-permeability core in the coil.

increasing the number of turns of wire.

increasing voltage."

Learn more about electromagnet here: https://brainly.com/question/12555869.

#SPJ11

The electric field intensity at the same point due to the two point charges is -4.13e5 N/C.

Electric force is the force experienced by a charged object placed in an electric field. The electric force formulation is sometimes confused with Coulomb's law, but the electric force is more general than Coulomb's law and applies only to two-point charges. 

The electric force on a 10 nC charge located at (0, 3, 1) due to the two point charges is given by:

F = (1e-7 N m²/C²) × [(1e-3 C) / (3² + 4² + 5²)³/2 + (-2e-3 C) / (8² + 8² + 9²)³/2]

F = -4.13e-5 N

The electric field intensity at the same point due to the two point charges is given by:

E = F / (10e-9 C)

E = -4.13e5 N/C

Learn more about the electric force: brainly.com/question/30236242

#SPJ11

The number of the different ways can be 4. The correct option is C.

The total resistance of four identical resistors in series is 4R, while the total resistance of four identical resistors in parallel is R. Therefore, there are two ways to connect the four resistors in order to achieve a total resistance of R: connecting them in series or connecting them in parallel.

(i) In the first way, we connect two pairs of resistors in series, and then, these pairs are connected in parallel.

(ii) In a second way, we connect two resistors in series, and then, this pair is connected in parallel with the other pair of resistors that are also connected in series.

(iii) In a third way, we connect three resistors in series and connect this combination in parallel with the remaining resistor.

(iv) In a fourth way, we connect all four resistors in series.

We need to connect four identical resistors of resistance R so that the equivalent resistance of the resulting combination is R. The number of ways we can do it is 4. So, the correct option is (C) 4.

To learn more about resistors follow

https://brainly.com/question/9629378

#SPJ11

A) Velocity of the space capsule after the push in the reference frame= - 0.042 m/s .B) Magnitude of the average force exerted by each on the other= 462 N.C) Kinetic energy of the astronaut after the push in the reference frame= 614 J. D) Kinetic energy of the capsule after the push in the reference frame= 22.8 J

Explanation:Given dataMass of astronaut= 135 kgSpeed of astronaut= 2.70 m/sMass of space capsule= 1900 kgTime taken by astronaut to acquire speed= 0.66 secondsWe have to find- the velocity of the space capsule after the push in the reference frame- the magnitude of the average force exerted by each on the other- the kinetic energy of the astronaut after the push in the reference frame- the kinetic energy of the capsule after the push in the reference frameThe first step is to use conservation of momentum to find the velocity of the space capsule after the push in the reference frame.Conservation of momentum Initial momentum= Final momentum(1900 kg) (0 m/s) = (1900 kg + 135 kg) (v)V = -0.042 m/sThis negative sign indicates that the space capsule moves backward. A) Velocity of the space capsule after the push in the reference frame= - 0.042 m/sThe second step is to use the impulse-momentum theorem to find the average force exerted by each on the other. Impulse= change in momentum .We have the initial and final momenta from the conservation of momentum.Velocity before push= 0Velocity after push= -0.042 m/sImpulse= mΔv= (1900+135)(-0.042-0)NΔt= Impulse = Δp = 1900.042/0.66N= 462 NC) Magnitude of the average force exerted by each on the other= 462 NThe third step is to find the kinetic energy of the astronaut after the push in the reference frame.Kinetic energy= ½ mv²Kinetic energy of astronaut= ½ (135) (2.70)²J= 614 JD) Kinetic energy of the capsule after the push in the reference frame.Kinetic energy of space capsule= ½ (1900) (-0.042)²J= 22.8 J.

for more such questions on Velocity

https://brainly.com/question/10425898

#SPJ11

The statement is True, A charge is passing through a static magnetic field. the velocity of the charge makes a 90o angle with the field. the force exerted by the magnetic field does work on the charge.

The magnetic force exerted on a moving charge with a velocity in the presence of a magnetic field is given by F = qvBsinθ

Magnetic force is a fundamental force that arises due to the motion of electric charges. It is the force that acts between two magnetic poles or between a magnetic pole and a moving charged particle. Magnetic force is a vector quantity and is described in terms of its direction, magnitude, and point of application.

The force between two magnetic poles is governed by the inverse square law, which means that the force decreases as the distance between the poles increases. The direction of the magnetic force is perpendicular to the direction of motion of the charged particle and to the direction of the magnetic field in which it moves. The magnitude of the magnetic force is proportional to the charge of the particle, its velocity, and the strength of the magnetic field.

To learn more about Magnetic force visit here:

brainly.com/question/3160109

#SPJ4

The Earth's mass is 80 times that of the moon. The ratio of gravitational force the Earth exerts on the moon to the gravitational force the moon exerts on Earth is 80:1.

The relationship between the mass of two objects and their gravitational force can be expressed mathematically using Newton's Law of Gravitation. The formula is:

Where

The gravitational force between two objects is always proportional to the product of their masses. Therefore, if one object has 80 times the mass of the other, then the gravitational force it exerts on the smaller object will be 80 times greater as well. Hence, the ratio of gravitational force the Earth exerts on the moon to the gravitational force the moon exerts on Earth is 80:1.

Learn more about gravitational force: https://brainly.com/question/72250

#SPJ11

The void in mineral aggregate (VMA) is -12.35%, the void in total mix (VTM) is 0.000990 and the voids filled with asphalt (VFA) is -12.35%.

To determine the VMA, VTM, and VFA neglecting absorption, we need to calculate the following:

[tex]VMA = [(Gmb - Gsb) / Gmb] \times 100[/tex]

[tex]VTM = Gmb / ρb[/tex]

[tex]VFA = [(Gmb - Ga) / Gmb] \times 100[/tex]

Where, Gmb = bulk specific gravity of the compacted specimen of HMA.

Gsb = bulk specific gravity of the aggregate in the HMA specimen.

ρb = bulk density of the HMA specimen

Ga = apparent specific gravity of the aggregate in the HMA specimen.

Substitute the given values we get:

[tex]Gmb = 2.435, Gsb = 2.735, \rho b = 2455\  kg/m^3[/tex],

[tex]Ga = (Gmb \times Gsa) / (5.1 + 0.049 (Gmb - 2.435)) = (2.435 \times 2.735) / (5.1 + 0.049 (2.435 - 2.435)) = 2.449[/tex]

By substituting these values in the above formula, we get:

[tex]VMA = [(2.435 - 2.735) / 2.435] \times 100 = -12.35[/tex]%

[tex]VTM = 2.435 / 2455 = 0.000990[/tex]

[tex]VFA = [(2.435 - 2.735) / 2.435] \times 100 = -12.35[/tex]%

Hence, VMA = -12.35%, VTM = 0.000990, VFA = -12.35%.

The minus sign indicates that the voids are insufficient. Therefore, the mix is unstable.

Learn more about specific gravity:

https://brainly.com/question/20422535

#SPJ11

2hcosθsinθ is the distance R from the foot of the wall the emerging steam strike the floor.

the second hole should be cut at a height of (H - h/4) above the bottom of the tank in order to get the same range as the first hole.

Let's derive an expression for the velocity of water coming out of the hole. The water coming out of the hole is a free fall under gravity .

So we can use Bernoulli's equation to find the velocity of the water coming out of the hole as:
P + (1/2)ρv² + ρgh = constant ….(1)

where P is the pressure of the water inside the tank,

ρ is the density of water,

v is the velocity of the water coming out of the hole,

h is the height of the water level inside the tank, and g is the acceleration due to gravity.

Since the hole is below the water's surface, the pressure at the hole is the pressure due to water at the second hole should be cut at a height of (H - h/4) above the bottom of the tank in order to get the same range as for the first hole.

depth h. So, the pressure due to water is ρgh.

At the hole, the velocity of water is v, and the height of the water surface above the hole is (H - h). Therefore, the pressure at the surface of the water is ρg(H - h). Putting these values in equation (1), we get:

P + (1/2)ρv² + ρgh = ρg(H - h) + P₀

Where P₀ is atmospheric pressure, which can be considered constant. This is the Bernoulli's equation.
Let's apply the law of conservation of mechanical energy.
Let the velocity of the water coming out of the hole be v.

The kinetic energy of the water at the hole is (1/2)ρv².

The gravitational potential energy of the water at the hole is ρgh.

The gravitational potential energy of the water at the point where it hits the floor is zero.

Hence, by the law of conservation of mechanical energy, we can write:

(1/2)ρv² + ρgh = 0

Solving for v, we get:

v = √(2gh)

Part a) of the question:

We know the velocity of the water coming out of the hole. Let's assume that the stream coming out of the hole makes an angle of θ with the horizontal, as shown in the figure.

We need to find the horizontal distance R from the foot of the wall at which the stream hits the floor. This is given by:

R = (v²/g)sin2θ

sin2θ can be written as 2sinθcosθ. Therefore, we get:

R = (v²/g)sinθcosθ

Using the value of v from above, we get:

R = (2gh/g)sinθcosθ = 2hcosθsinθ

Part b) of the question:

Let's assume that the second hole is cut at a depth x above the bottom of the tank. We need to find the value of x such that the stream emerging from it could have the same range as for the first hole.

This means that the horizontal distance R must be the same for both holes. Using the expression for R from above, we get:

2hcosθsinθ = (2gh/g)sinθcosθ

Simplifying, we get:

x = H - h/4

To know more about Bernoulli's equation:https://brainly.com/question/15396422

#SPJ11

(d) n=3 to 1 would emit the shortest wavelength. Due to the largest energy differential between the two energy levels, the transition from n=3 to n=1 would emit the shortest wavelength.

Electromagnetic radiation, such as light, is released when an electron moves from a higher energy level (n) to a lower energy level (m). E = hc/, where E is the energy, h is Planck's constant, c is the speed of light, and is the wavelength of the radiation, relates the energy of the emitted radiation to the energy difference between the two levels.

Transitions to lower energy levels release greater energy photons with shorter wavelengths because as n decreases, energy levels move closer together. Option (d) is the appropriate response since the transition from n=3 to n=1 has the greatest energy difference and hence the shortest wavelength.

learn more about wavelength here:

https://brainly.com/question/31143857

#SPJ4

The region of the periodic table that the unknown element would likely be found is metals (option A).

Metals are a number of chemical elements in the periodic table that form a metallic bond with other metal atoms.

Metals are generally shiny, somewhat malleable and hard, often a conductor of heat and electricity.

According to this question, an unknown element has good conductivity and is a solid at room temperature. It possesses two valence electrons.

Elements with two valence electrons can be found in group two of the periodic table, which is a metallic element.

Learn more about metals at: https://brainly.com/question/28650063

#SPJ1

The roller coaster will have the greatest amount of gravitational potential energy at the top of the incline, just before the cars are released to roll down the track.

Electrical energy is transferred between the main and secondary coils of a transformer through a magnetic circuit that is created by the iron core. A magnetic field that is continuously changing is produced in the iron core when an alternating current is fed through the primary coil. Energy is transferred between the coils as a result of the magnetic field's induction of a matching current in the secondary coil. Because of its high permeability and sensitivity to magnetism, the iron core can magnetize. A greater induced current is produced in the secondary coil as a result of the first coil's magnetic field being amplified by the iron core's magnetization. The effective transmission of electrical energy in a transformer depends on the magnetic characteristics of the iron core. The roller coaster will therefore have the most potential energy at the highest point of the trip.

learn more about gravitational potential energy here:

https://brainly.com/question/19768887

#SPJ4

The correct option is A, the amplitude and period of the oscillations that result from this collision are 0.300 m in 1.26s.

The expression for Period of spring is,

[tex]T = 2\pi\sqrt{\frac{2m}{k} }[/tex]

Here, m is the mass of the spring and k is the spring constant

Substitute 2 kg

for m

and 100N/m

for k

in equation [tex]T = 2\pi\sqrt{\frac{2m}{k} }[/tex]

and solve for T .

[tex]T = 2\pi\sqrt{\frac{(2)2 kg}{100 N/m} }[/tex]

T = 1.26s

In physics, amplitude refers to the maximum displacement or distance moved by a wave from its equilibrium or mean position. It is a measure of the intensity or strength of a wave, and it is usually represented as the height of the crest or depth of the trough of the wave.

The amplitude of a wave can be measured in various units, depending on the type of wave and the context in which it is being studied. For example, the amplitude of a sound wave is measured in decibels (dB), while the amplitude of an electromagnetic wave is measured in volts per meter (V/m). Amplitude plays an important role in the behavior of waves. It determines the energy carried by the wave and affects other properties such as frequency, wavelength, and phase.

To learn more about Amplitude visit here:

brainly.com/question/8662436

#SPJ4

Complete Question: -

A 2.00-kg object is attached to an ideal massless horizontal spring of spring constant 100.0 N/m and is at rest on a frictionless horizontal table. The spring is aligned along the x-axis and is fixed to a peg in the table. Suddenly this mass is struck by another 2.00-kg object traveling along the x-axis at 3.00 m/s, and the two masses stick together. What are the amplitude and period of the oscillations that result from this collision

A) 0.300 m, 1.26 s

B) 0.300 m, 0.889 s

C) 0.424 m, 0.889 s

D) 0.424 m, 1.26 s

E) 0.424 m, 5.00 s

The best describes the movement of the object between the times of 0 and 6 on the graph is moving at a constant speed. Therefore, option A is correct.

Moving occurs when an object's location compared to a fixed spot changes. Even seemingly stationary things shift. When one item moves in connection to another, we say it is moving relative to the other object.

Kinematics is the field of physics concerned with forces and their effects on motion, whereas dynamics is concerned with forces and their effects on motion. When a force pushes or draws on an item, it moves in the same way as the force.

Thus, option A is accurate because the object moves at a consistent pace between periods 0 and 6 on the graph.

To learn more about the movement of an object, follow the link;

brainly.com/question/2288841

#SPJ1

Answer:

The correct answer is "glass".

Explanation:

A room with a smooth and hard surface like the glass is likely to produce an echo because when sound waves hit such surfaces, they bounce back and forth, creating echoes. Soft and porous materials like carpet, dirt, or foam absorb sound waves, reducing the reflection and producing less echo. Therefore, the answer is glass.

The distance till which Rhoda should compress the spring to score a direct hit is 1.37 centimeters.

Rhoda needs to compress the spring by a distance of 1.37cm to score a direct hit. The equation to find this distance is: D = [tex][(x + y)^2 - x^2]^{(1/2)}[/tex]

where, D is the horizontal distance, x is the initial compression of the spring (1.7cm), and y is the additional compression needed to reach the target box (the unknown).

To solve for y, we can rearrange the equation as:

[tex]y = [(D^2 - x^2]^{(1/2)} - x\\[/tex]

Plugging in the values, we have

[tex]y = [(2.2^2 - (1.7)^2]^{(1/2)}[/tex]- 1.7 = 1.37cm

Therefore, Rhoda needs to compress the spring by 1.37 cm to score a direct hit.

Learn more about Spring here:

https://brainly.com/question/14670501

#SPJ11

Answer:

The light and heat of the sun are produced by the process of nuclear fusion, where hydrogen atoms combine to form helium, releasing vast amounts of energy in the process.

The line does not go through the origin because there is some inherent delay in the heating process that is not dependent on the mass of water in the kettle.

Part (c) asks to suggest why the line on Figure 2 does not go through the origin. The line on Figure 2 represents the relationship between the mass of water in the kettle and the time taken for the kettle to switch off.

Boiling point refers to the temperature at which a liquid substance turns into a gas or vapor. The boiling point of a substance depends on various factors, such as its molecular structure, intermolecular forces, and atmospheric pressure.

The boiling point of a substance remains constant under a given pressure, and any additional heat input during boiling will only cause the temperature of the vapor to increase rather than the liquid. The boiling point is an important physical property of a substance, and it can be used to determine the purity of a liquid through the process of distillation. The boiling point of water is 100 degrees Celsius at standard atmospheric pressure (1 atm), while the boiling point of ethanol is 78.5 degrees Celsius.

To learn more about Boiling point visit here:

brainly.com/question/25777663

#SPJ4

If work is done on an object, the object has more energy than it did before. This energy can come from increases in kinetic energy, potential energy, and/or internal energy.

The energy transferred into an object by an external force is the work done on that object. The unit of work is the joule (J). Work can be expressed as a dot product of the force and the displacement, as given below:

W = F . d

Energy is the capacity of a system to do work. There are many different forms of energy, which can be classified as kinetic, potential, or internal energy.

Kinetic energy is the energy of motion. The kinetic energy of an object of mass m and velocity v is given by the equation below:

K = (1/2)mv²

Potential energy is the energy that a system possesses because of its position in a gravitational or electric field. A body's potential energy depends on its mass, height, and position. An object has gravitational potential energy when it is in a position that can potentially fall to a lower height. A system's electric potential energy is a result of the potential difference between two points.

Internal energy is the energy that a system possesses due to the motion of its atoms and molecules. The total energy of a system is the sum of its kinetic and potential energy. The internal energy of a system is the sum of the energy associated with the motion and position of its atoms and molecules. When energy is transferred to a system by an external force, some of that energy is converted to internal energy.

Learn more about Energy here: https://brainly.com/question/874116

#SPJ11

4.92 m/s for her final velocity.

The momentum of the skater before throwing the stone is:

p1 = m1 * v1 = 50 kg * 5 m/s = 250 kg*m/s

where m1 is the mass of the skater and v1 is her initial velocity.

When the skater throws the stone, the total momentum of the system (skater + stone) is conserved. The momentum of the stone is:

p2 = m2 * v2 = 2 kg * 2 m/s = 4 kg*m/s

where m2 is the mass of the stone and v2 is its velocity.

Let's assume the skater throws the stone in front of her. To conserve momentum, the skater will move in the opposite direction to the stone. Let's call the skater's final velocity v3. Then:

p1 = p2 + p3

where p3 is the momentum of the skater after throwing the stone. Substituting the values we get:

250 kgm/s = 4 kgm/s + 50 kg * v3

Solving for v3, we get:

v3 = (250 kgm/s - 4 kgm/s) / 50 kg = 4.92 m/s

So the skater's speed after throwing the stone in front of her is 4.92 m/s.

If the skater throws the stone behind her, the same conservation of momentum principle applies, and we get the same result of 4.92 m/s for her final velocity.

Sorry if I'm wrong

(a) Free-body diagram of block is as given below. (b) Acceleration of the block is 2.529 m/s². (c) Speed of the block when it reaches the bottom of the incline is 3.18 m/s.

Frictionless surface is an invented concept of surface that is based on imagination and creative ideas of scientists where assumed friction of surface is zero.

(a) Free-body diagram of block is:

            /|

           / |

          /  | m

         / θ |

        /    |

       /_____|

        f ||

          ||

          ||

          ||

          \/

where m is mass of the block, θ is angle of inclination, f is force of friction (which is zero in this case), and g is acceleration due to gravity acting vertically downwards.

(b) The force acting along incline is component of the weight of block parallel to the incline, given by mg sin θ, where m is the mass of the block and g is acceleration due to gravity. Since there is no friction, this force is equal to net force acting on block, which is ma, where a is acceleration of block along the incline. Therefore,

mg sin θ = ma

a = g sin θ

a = 9.81 m/s² * sin 15.00 = 2.529 m/s²

Therefore, the acceleration of the block is 2.529 m/s².

(c) v² = u² + 2as

where u is the initial velocity (which is zero), s is the displacement (which is 2.00 m along the incline), and a is the acceleration (2.529 m/s²). Solving for v, we get:

v = √(2as) = √(2 * 2.00 m * 2.529 m/s²) = 3.18 m/s

Hence, speed of block when it reaches bottom of incline is 3.18 m/s.

To know more about frictionless surface, refer

https://brainly.com/question/25825478

#SPJ1

The statement that best describes the relationship between how consumers engage with product and service based brands is C. Though product and service brands both seek likes from consumers, consumers are more likely to "like" product brands because they can

accoce the quality of the product more.

The relationship between how consumers engage with product and service based brands is complex and multifaceted. Both types of brands seek to establish a strong relationship with their consumers through various strategies, such as effective advertising, personalized communication, quality customer service, and social media engagement.

However, the specific strategies employed by product and service brands may differ depending on the nature of their offerings and the preferences of their target audience. For instance, product brands may focus on showcasing the quality, features, and benefits of their products through visual and sensory experiences, while service brands may emphasize the expertise, reliability, and personalization of their services through word-of-mouth recommendations and customer reviews.

Learn more about consumer on;

https://brainly.com/question/24438632

#SPJ1

Which statement best describes the relationship between how consumers engage with product and service based brands?

A. Though product and service brands both seek likes from consumers, they have many more effective strategies to attract consumers to their product than social media.

B. Service brands seek likes from consumers more than product brands do because they rely on recommendations from their consumers in order to attract new business.

C. Though product and service brands both seek likes from consumers, consumers are more likely to "like" product brands because they can

accoce the quality of the product more.

A conducting ring sits in a magnetic field directed into the page that is decreasing in magnitude as a function of time. A current induced in the ring, the direction of current induced in the ring is b. counterclockwise.

Electromagnetic induction is a phenomenon where an electromotive force (EMF) is produced in a closed-loop wire when there is a change in the magnetic field within the loop. Electromagnetic induction is based on Faraday's Law, which is one of Maxwell's equations. It's named after Michael Faraday, who discovered it. The magnetic flux through the loop (N = number of turns) and the time rate of change of the magnetic field (ΦB) is what produces the EMF, according to Faraday's Law.

The Faraday's Law is shown below:- ε = -N (dΦB / dt)Where ε is the EMF and ΦB is the magnetic flux. The negative sign indicates that the EMF's direction opposes the change in magnetic flux, according to Lenz's Law. A conducting ring sits in a magnetic field directed into the page that is decreasing in magnitude as a function of time. Is a current induced in the ring? Yes, a current is induced in the ring.What is the direction of current induced in the ring?The induced current in the ring is counterclockwise.

Learn more about Faraday's Law at:

https://brainly.com/question/1640558

#SPJ11

The ring rotates once every 4.10 s. If a rider's mass is 51.0 kg, how much force does the ring push on her at the top of the ride is 500 N.

The solution is explained below:

As the rider is at the top of the ride, the only force acting on him is the force of gravity, which is pointing downwards, and the force with which the ring is pushing him towards the center of the circular path. By equating both forces, we can determine the required force to maintain the rider at the top of the ride.

Hence, the answer to the question is that the force with which the ring pushes the rider at the top of the ride is equal to the force of gravity, which is given as F = mgF = (51.0 kg)(9.81 m/s^2) = 500 N

Therefore, the force with which the ring pushes on the rider at the top of the ride is 500 N.

Learn more about force at  brainly.com/question/13191643

#SPJ4

Answer:

-7,942.2 Newtons

Explanation:

Car Force Calculation.

How much force would you exert if your car weighs 1,302 and your acceleration rate is -6.1 m/s

To calculate the force exerted by a car, we can use the formula:

force = mass x acceleration

where mass is the mass of the car in kilograms, and acceleration is the acceleration rate in meters per second squared (m/s^2).

Given that the car weighs 1,302 kg and the acceleration rate is -6.1 m/s^2, we can plug these values into the formula:

force = 1,302 kg x (-6.1 m/s^2)

force = -7,942.2 Newtons (N)

The negative sign indicates that the force is in the opposite direction of the acceleration, which in this case is towards the back of the car.

In a conservative system, the total energy is conserved, which means that the initial energy (ei) is equal to the final energy (ef).

Conservative systems are those where the total energy remains constant over time, such as in a pendulum swinging back and forth or a planet orbiting a star under the influence of gravity.

In such systems, the energy can be converted from one form to another, but the total amount of energy remains constant.

Therefore, we can say that in a conservative system, the initial energy (ei) and the final energy (ef) are equal. This means that any changes in the system's energy, such as potential energy being converted into kinetic energy, must be balanced by an equal and opposite change in some other form of energy, such as potential energy being converted into kinetic energy.

Learn more about conservation of energy here: https://brainly.com/question/166559

#SPJ1

a) The magnetic field at the center of loop 20.0 cm in diameter carrying is equals to the 2.8274×10⁻⁵ T.

b) Smallest magnetic field that change measured value by 0.0100% is equals to the 2.8274×10⁻⁹ T.

We know that moving charges create magnetic fields and magnetic fields exert forces on moving charges, devices that are used to measure field strengths. Consider the wire segment present in above figure.

A) Diameter of wire segment, d = 20 cm or 0.2 m carrying current I = 4.5 A

Magnetic Field at the center of current loop of segment, B= μ₀I/d

= 4π×10⁻⁷×4.5/0.2

= 2.8274×10⁻⁵ T

Therefore magnetic Field at the center of current loop 2.8274×10⁻⁵ T.

B) Current in carrying wire, I = 4.5 A

The field should be less than the measured field by 0.0100%. So, smallest field that change measured value by 0.0100% = 0.0100% of 2.8274×10⁻⁵ T

= 2.8274×10⁻⁹ T

Therefore Smallest field that change measured value by 0.0100% = 2.8274×10⁻⁹ T

For more information about magnetic field, visit :

https://brainly.com/question/26257705

#SPJ4

Complete question:

The above figure completes the question.

Since moving charges create magnetic fields and magnetic fields exert forces on moving charges, devices that are used to measure field strengths often affect the system they are being used to measure. Consider the wire segment in the figure, which is used to measure the magnetic field by determining the foree exerted on the current flowing through it. Part (a) Estimate the field the loop creates by calculating the field strength, in teslas, at the center of a circular loop 20.0 cm in diameter carrying

Part (b) What is the smallest field strength this loop can be used to measure with a 4.5 -A current, if its field should alter the measured field by 0.0100% or less?