A. Directions:Describe ways on how to protect humans and plants and animals Choose your answer in the box and fill in the concept map below​

Answer:

It has a negative charge and is located in orbitals around the nucleus

Explanation:

The statement describes an electron is " It has a negative charge and is located in orbitals around the nucleus."

The electron would be a subatomic particle with a negatively one elementary charge electric charge.

Protons, that have a positive charge, as well as neutrons, which have no electrical charge, make up the nucleus. Quarks were subatomic particles that make up protons but also neutrons.

Electrons were present surrounding the atom's nucleus, in contrast to protons as well as neutrons, that are contained within the nucleus at its core. Negative electrons were drawn to the positive nucleus since the electric charges of opposite polarity attract one another.

To know more about electrons and nucleus.

https://brainly.com/question/23366064

#SPJ3

Answer:

1.60 g of Fe₂O₃

Explanation:

We'll begin by calculating the number of mole water that reacted. This can be obtained as follow:

Volume (V) = 6.50 L

Temperature (T) = 50.2 °C = 50.2 + 273 = 323.2 K

Pressure (P) = 0.121 atm

Gas constant (R) = 0.0821 atm.L/Kmol

Number of mole (n) =?

PV = nRT

0.121 × 6.5 = n × 0.0821 × 323.2

0.7865 = n × 26.53472

Divide both side by 26.53472

n = 0.7865 / 26.53472

n = 0.03 mole

Thus, 0.03 mole of water reacted.

Next, we shall determine the number of mole of Fe₂O₃ produced from the reaction. This can be obtained as follow:

2Fe + 3H₂O —> Fe₂O₃ + 3H₂

From the balanced equation above,

3 moles of H₂O reacted to produce 1 mole Fe₂O₃.

Therefore, 0.03 mole of H₂O will react to produce = (0.03 × 1)/3 = 0.01 mole of Fe₂O₃.

Thus, 0.01 mole of Fe₂O₃ was produced from the reaction.

Finally, we shall determine the mass of 0.01 mole of Fe₂O₃. This can be obtained as follow:

Mole of Fe₂O₃ = 0.01 mole

Molar mass of Fe₂O₃ = (56×2) + (16×3)

= 112 + 48

= 160 g/mol

Mass of Fe₂O₃ =?

Mass = mole × molar mass

Mass of Fe₂O₃ = 0.01 × 160

Mass of Fe₂O₃ = 1.60 g

Therefore, 1.60 g of Fe₂O₃ were produced.

Answer:2-chloro-1,3-dimethylcyclopentane

Explanation

Answer:

0.518 g

Explanation:

Step 1: Write the balanced equation

3 CaCl₂ + 2 H₃PO₄ ⇒ Ca₃(PO₄)₂ + 6 HCl

Step 2: Calculate the moles corresponding to 0.555 g of CaCl₂

The molar mass of CaCl₂ is 110.98 g/mol.

0.555 g × 1 mol/110.98 g = 5.00 × 10⁻³ mol

Step 3: Calculate the moles of Ca₃(PO₄)₂ produced

5.00 × 10⁻³ mol CaCl₂ × 1 mol Ca₃(PO₄)₂/3 mol CaCl₂ = 1.67 × 10⁻³ mol Ca₃(PO₄)₂

Step 4: Calculate the mass corresponding to 1.67 × 10⁻³ moles of Ca₃(PO₄)₂

The molar mass of Ca₃(PO₄)₂ is 310.18 g/mol.

1.67 × 10⁻³ mol × 310.18 g/mol = 0.518 g

Answer:

Slower

Explanation:

The reaction between alkyl halides and sodium iodide-in-acetone is an SN2 reaction. The rate of reaction depends on the concentration of the alkyl halide as well as the concentration of the sodium iodide. It is a bimolecular reaction.

This means that if the concentration of any of the reactants is halved, the rate of reaction decreases accordingly.

Therefore, if the iodide solution is half as concentrated, the reaction is observed to be slower in accordance with the rate law;

Rate = k[alkyl halide] [iodide]

Answer:

B₂O₃

Explanation:

Step 1: Calculate the mass of oxygen in 150 mg of boron oxide

Of 150 mg of boron oxide, 46.6 mg belong to boron. The mass of oxygen is:

150 mg - 46.6 mg = 103.4 mg

Step 2: Calculate the percent by mass of each element

We will use the following expression.

%Element = mElement/mCompound × 100%

%B = 46.6 mg/150 mg × 100% = 31.1%

%O = 103.4 mg/150 mg × 100% = 68.9%

Step 3: Divide each percentage by the atomic mass of the element

B: 31.1/10.81 = 2.88

O: 68.9/16.00 = 4.31

Step 4: Divide both numbers by the smallest one (2.88)

B: 2.88/2.88 = 1

O: 4.31/2.88 ≈ 1.5

Step 5: Multiply both numbers by 2 so that they are integers

B: 1 × 2 = 2

O: 1.5 × 2 = 3

The empirical formula is B₂O₃.

Answer:

the result for the following are (a) P is directly proportional to n

(b) V is directly proportional to T (c) P is directly proportional to T (d) T is inversly proportional to V (e) P is inversely proportional to V

Answer:

high melting point

Explanation:

The filament of a bulb is often heated to very high temperatures as the bulb is in operation.

Many times, electric bulbs may have to be on for a whole day and they may reach temperatures that are outrageously high in the process.

The material of the filament must have a very high melting point so that it doesn't melt while the bulb is still in operation.

Answer:

Actually the answer is High Vapor pressure

Explanation:

Answer:

If the gas is at STP, THE 1 mole is 22.4 liters.

Explanation:

Answer:

The correct option is D (KBr)

Explanation:

Potassium bromide (KBr) is a typical example of an IONIC CRYSTAL. Positive and negative ions are arranged in a regular pattern to give a giant crystal lattice in an ionic solid.

Ionic crystals are hard and have high melting points because the electrostatic forces holding the ions are strong. In the solid state, ionic compounds are poor conductors of electricity because the ions are held rigidly in place and so cannot moves about.

When melted or when dissolved in water, the ions are free to move about and the ionic substances become good conductors of electricity.

Ionic crystals are also BRITTLE. When struck, they tend to shatter because as planes of ions slip by one another, they pass from a condition of mutual attraction to one of mutual repulsion.

Answer:

64 g

Explanation:

Step 1: Write the balanced equation

2 Na + Cl₂ ⇒ 2 NaCl

Step 2: Calculate the moles corresponding to 25 g of Na

The molar mass of Na is 22.98 g/mol.

25 g × 1 mol/22.98 g = 1.1 mol

Step 3: Calculate the moles of NaCl formed from 1.1 moles of Na

The molar ratio of Na to NaCl is 2:2. The moles of NaCl formed are 2/2 × 1.1 mol = 1.1 mol.

Step 4: Calculate the mass corresponding to 1.1 moles of NaCl

The molar mass of NaCl is 58.44 g/mol.

1.1 mol × 58.44 g/mol = 64 g

Answer:

6.52g = Actual yield (g)

Explanation:

The yield of a reaction is:

Percent yield = Actual yield (g) / Theoretical Yield (g) * 100

As 1 mol of isopentyl alcohol produce 1 mol of isopentyl acetate (Theoretical Yield), the theroretical yield of isopentyl acetate is 65.0mmol = 0.0650mol. To solve this question we need to convert the moles of isopentyl acetate to mass using its molar mass (130.19g/mol).

With the equation of percent yield we can find the mass obtained as follows:

Theoretical yield:

0.0650mol * (130.19g/mol) = 8.46g of isopentyl alcohol

Mass produced:

77 = Actual yield (g) / 8.462g * 100

6.52g = Actual yield (g)

The mass of isopentyl acetate that can be produced is 6.52 g

See attached photo

From the balanced equation,

1 mole of isopentyl alcohol reacted to produce 1 mole of isopentyl acetate.

Therefore,

65 mmole (i.e 0.065 mole) of isopentyl alcohol will also react to produce 0.065 mole of isopentyl acetate.

Actual yield = percent × theoretical

Actual yield = 77% × 0.065

Actual yield = 0.05005 mole

Mass = mole × molar mass

Mass of isopentyl acetate = 0.05005 × 130.19

Mass of isopentyl acetate = 6.52 g

Learn more about stoichiometry:

https://brainly.com/question/14735801

Answer is 9

pKb=−logK

b=−log10^-5=5

pOH=pKb+log[acid]*[salt]

Substitute values in the above expression.

pOH=5+log0.1*0.1=5

Hence, the pH of the solution is pH=14−pOH=14−5=9

Learn more about pH here

https://brainly.com/question/13557815

#SPJ2

Answer:

The sample should be diluted

Explanation:

According to Beer Lambert's law, the absorbance of a sample depends on the concentration of the sample.

Hence, if the concentration of the sample is very high, the spectrophotometer will also report a very high value of absorbance.

When this is the case, the sample should simply be diluted and the readings are taken again using the spectrophotometer.

Answer:

It is equal to the total mass of the products.

Explanation:

Hope this helps :)

Answer:

E = hv

Explanation:

Energy = planck constant × frequency

Answer:

Methane is present in solid, liquid and gaseous form.

Explanation:

Methane hydrate is present in solid state when the hydrogen-bonded water and methane gas come into contact at high pressures and low temperatures in the deep oceans while on the other hand, methane which is present inside the earth surface in gaseous form due to non-availability of water that can combine with methane. Methane is also found in liquid form when it is cool with high pressure and low temperature.

Explanation:

here are the answers. Note that because the pressure is constant, you can use Gay Lussac's formula

Answer:

A positively charged object will exert a repulsive force upon a second positively charged. This repulsive force will push the two objects apart while a negatively charged object will exert a repulsive force upon a second negatively charged object. Objects with like charge repel each other

The interaction between objects with positive and negative electric charges can be analogously modeled using magnets. The Types of Forces Involved are; Attractive Magnetic Force, Repulsive Magnetic Force and the Energy Transformations are; Potential Energy Transformation, and Kinetic Energy Transformation.

In this analogy, magnets can represent the charges, and magnetic forces can represent the electric forces.

Interaction Between Magnets

Imagine we have two magnets: one with a north pole (N) and the other with a south pole (S). When you bring the north pole of one magnet close to the south pole of the other magnet, they are attracted to each other. Conversely, if you bring the north pole of one magnet near the north pole of the other magnet, they repel each other.

Types of Forces Involved:

Attractive Magnetic Force (Analogous to Electric Attraction):

When the north pole of one magnet is brought close to the south pole of another magnet, they experience an attractive magnetic force. Similarly, when objects with opposite electric charges were brought close together, then they will experience an attractive electric force.

Repulsive Magnetic Force (Analogous to Electric Repulsion):

When two magnets with the same pole (both north or both south) are brought close to each other, they experience a repulsive magnetic force. This is analogous to the repulsion between objects with like electric charges (both positive or both negative).

Energy Transformations;

When you bring the magnets closer together or move them apart, energy transformations occur:

Potential Energy Transformation;

As the magnets are moved closer together, the potential energy of the magnetic interaction decreases. This is because the magnets' magnetic fields interact more strongly, and they tend to move toward each other due to the attractive or repulsive forces.

Kinetic Energy Transformation;

If you let the magnets go after bringing them close together, they will move towards each other (in the case of attraction) or move apart (in the case of repulsion). This movement involves a transformation of potential energy into kinetic energy. The kinetic energy increases as the magnets move, and it's at its maximum when the magnets are farthest apart (in the case of repulsion) or when they collide (in the case of attraction).

To know more about Magnetic Force here

https://brainly.com/question/10353944

#SPJ3

Answer:

Zn(s) + Cu²⁺(aq) ⇒ Zn²⁺(aq) + Cu(s)

Explanation:

Let's consider the molecular single displacement equation between Zn and Cu(NO₃)₂

Zn(s) + Cu(NO₃)₂(aq) ⇒ Zn(NO₃)₂(aq) + Cu(s)

The complete ionic equation includes all the ions and insoluble species.

Zn(s) + Cu²⁺(aq) + 2 NO₃⁻(aq) ⇒ Zn²⁺(aq) + 2 NO₃⁻(aq) + Cu(s)

The net ionic equation includes only the ions that participate in the reaction and insoluble species.

Zn(s) + Cu²⁺(aq) ⇒ Zn²⁺(aq) + Cu(s)

Answer:

All of the above.

Explanation:

For a scientific hypothesis to be considered a hypothesis, it has to be testable. When conducting a lab experiment, it also allows the tester to predict what might occur during and after the experimentation. They are also explanatory. For example, theories are hypotheses that have been verified and can explain why something in nature takes place.

Answer:

1.875 × 10^6 Hz

Explanation:

From the wave formula;

V= λf

λ= wavelength of the radio waves

f= frequency of the radio waves

f= v/λ

Since radio waves is an electromagnetic wave, it possesses the speed of light which is 3 × 10^8 m/s

f= 3 × 10^8 m/s/160 m

f= 1.875 × 10^6 Hz

Answer: The fractional abundance of lighter isotope is 0.518

Explanation:

Average atomic weight is the sum of the masses of the individual isotopes each multiplied by its fractional abundance. The equation used is:[tex]\text{Average atomic weight}=\sum_{i=1}^{n}\text{(Atomic mass of isotope)}_i\times \text{(Fractional abundance)}_i[/tex]           ......(1)

Let the fractional abundance of Ag-107 isotope be 'x'

Atomic mass = 106.90509 amu

Fractional abundance = x

Atomic mass = 108.9047 amu

Fractional abundance = (1 - x)

Average atomic mass of silver = 107.8682 amu

Plugging values in equation 1:

[tex]107.8682=(106.90509 \times x) + (108.9047 \times (1-x))\\\\107.8682=106.90509x+108.9047-108.9047x\\\\1.99961x=1.0365\\\\x=0.518[/tex]

Fractional abundance of Ag-107 isotope (lighter) = x = 0.518

Hence, the fractional abundance of lighter isotope is 0.518

Answer: Please, this question is not complete. I have attached the complete question.

The answer is in the attached picture below

Explanation:

The explanation is in the attached picture below

The structure of the alkene with the molecular formula [tex]C_6H_1_0[/tex] that reacts with [tex]Br_2[/tex]to give this compound is an alkene  called 1-hexene

The alkene is called 1-hexene. It has a double bond between the first and second carbon atoms. When it reacts with Br2, the bromine atoms add to the double bond, resulting in the formation of 1,2-dibromohexane.

The reaction is a radical addition reaction. The first step is the formation of a radical by the homolytic cleavage of one of the bromine atoms in Br2. This radical then adds to the double bond in the alkene, forming a new radical. The second bromine atom then adds to the radical, forming 1,2-dibromohexane

Learn more about addition reaction at:

https://brainly.com/question/1433809

#SPJ6

it depends on the widths of the recesses, and if it is causing the shelf to fracture and collapse into the sea, then a massive iceberg could be called from the life she,f and the ice shelf are way more important because it holds it up

Answer:

See explanation

Explanation:

The chlorination of benzene occurs in the presence of a Lewis acid. A Lewis acid is a compound that can accept a lone pair of electrons.

The first step in the chlorination of benzene is the formation of the ion Cl^+ which attacks the benzene ring.

This ion is formed when the Cl2 molecule undergoes heterolytic fission assisted by FeCl3 to yield FeCl4^- and Cl^+.

The Cl^+ electrophile now attacks the benzene ring to yield chlorobenzene.

Answer:

Calculate the moles of N2 molecules in 3.94 grams of nitrogen.

Calculate the grams of N2 in 5.03 x 1020 moles of nitrogen molecules.

Explanation:

Calculate the moles of N2 molecules in 4.73 liters of nitrogen gas. FALSE. You can't make this conversion using only the conversion factor with units of g/mol. To convert liters to moles are necessaries pressure, temperature and volume of the gas to use PV = nRT

Calculate the grams of N2 in 10.58 liters of nitrogen gas. FALSE. As explained, you need, P,V and T to find the moles of the gas. With the moles you can find the mass using the conversion factor of 28.02g/mol

Calculate the moles of N2 molecules in 3.94 grams of nitrogen. TRUE. You can find the moles of N2 as follows:

3.94g N2 * (1mol/28.02g) = 0.14 moles of N2 molecules

Calculate the grams of N2 in 5.03 x 1020 moles of nitrogen molecules. TRUE. The mass in 5.03x10²⁰ moles of nitrogen molecules is:

5.03x10²⁰ moles * (28.02g/mol) = 1.4x10²²g of nitrogen.