A charged particle of positivecharge +q rests at the center of a thick, neutral shell of metal conducting material with innerradius a and outer radius b (i.e., the metal itself carries no net charge and extends from radiusa to radius b). Find an expression for the magnitude |E| of the electric field a function of thecharge q and the distance r from the charged particle, for each of the three regions:
a) 0 < r < a b) a < r < b c) b < r.

a) The time of flight is 4.04 seconds.

b) The maximum height is 115 meters

c) The horizontal range is 63.3 meters.

d) velocity of hitting the ground is 35.35 m / s.

Projectile motion is a type of motion experienced by an object or particle that is launched in a gravitational field, such as from the Earth's surface, and moves along a curved path solely under the influence of gravity.

Given that a ball is thrown with an initial velocity of 25.2 m/s at 52.0° above the horizontal from the top of a cliff 95.0 m high.

a) The time of flight is calculated as:-

t = ( 2usinθ) / g

t = ( 2 x 25.2 x sin52 ) / 9.81

t = 4.04 sec

b) The maximum height is calculated as:-

hm = h + ( usinθ)²/ 2g

hm = 95 + ( 25.2 x sin52)² / ( 2 x 9.81 )

hm = 95 + 20

hm = 115 meters

c) The horizontal range will be,

d = u²sin2θ / g

d = ( 25.2² x sin( 52 x 2 ) / 9.81

d = 63.3 meters

d) The velocity of hitting the ground is calculated as:-

mgh + (1/2 ) mu² = 1/2 mv²

(9.81 x 95 ) + 1/2(25.2)² = v²

v = 35.35 m / s

To know more about projectile motion follow

https://brainly.com/question/15117650

#SPJ1

A 1.5-m-long aluminum rod must not stretch more than 1 mm and the normal stress must not exceed 40 MPa when the rod is subjected to a 4,5-kN axial load. Knowing that E= 70 GPa, determine the required diameter of the rod. The required diameter of the rod is 377 mm

To determine the required diameter of the aluminum rod, we can use the equation for normal stress in a prismatic bar under axial load:

σ = F / A

where σ is the normal stress, F is the axial load, and A is the cross-sectional area of the rod.

To ensure that the normal stress does not exceed 40 MPa, we can set the equation equal to 40 MPa and solve for the required cross-sectional area:

40 MPa = 4,500 N / A

Solving for A, we get:

A = 4,500 N / (40 MPa) = 0.1125 m^2

To ensure that the rod does not stretch more than 1 mm, we can use the equation for axial strain in a prismatic bar under axial load:

ε = ΔL / L

where ε is the axial strain, ΔL is the change in length, and L is the original length of the rod.

We can rearrange this equation to solve for the required change in length:

ΔL = ε * L = (1 mm) * (1.5 m)

= 0.0015 m

Using the equation for axial strain, we can also express the change in length in terms of the normal stress and the material's elastic modulus:

ε = σ / E

ΔL = ε * L = (σ / E) * L

Solving for the required cross-sectional area using this equation, we get:

A = (F * L) / (E * ΔL) = (4,500 N * 1.5 m) / (70 GPa * 0.0015 m) = 0.0893 m^2

Now that we have two equations for the required cross-sectional area, we can set them equal to each other and solve for the diameter:

A = π * d^2 / 4

d = sqrt(4A / π) = sqrt(4 * 0.1125 m^2 / π) = 0.377 m = 377 mm

Therefore, the required diameter of the aluminum rod is 377 mm.

To know more about Stress visit:

https://brainly.com/question/12871096

#SPJ4

The strength of the magnetic field will be increased by increasing the number of coils. The correct option is D.

A magnetic field is a vector field that describes the magnetic influence on moving charges, currents, and magnetic materials. A moving charge in a magnetic field is subjected to a force that is perpendicular to both its own velocity and the magnetic field.

An electromagnet is a type of magnet in which the magnetic field is produced by an electric current. Electromagnets usually consist of wire wound into a coil.

By increasing the number of coils there will be more current around the space resulting in a more magnetic field. In this way the strength of the magnetic field is increased.

To know more about magnetic fields follow

https://brainly.com/question/12523229

#SPJ1

"If we draw magnetic field lines for a magnet, field lines loop around the magnet starting at the north pole and ending at the south pole." Correct option is B.

Magnetic field lines are the fictitious lines that surround a magnet and reveal the magnet's magnetic field pattern. These lines have no beginning or end. They create a closed circuit. Outside of the magnet, they move from North to South, but inside the magnet, they move from South to North.

North and South poles are the two poles of a magnet. The lines along which magnetic force is applied are known as magnetic field lines. Around the magnet, magnetic field lines create closed loops. These lines originate at the North Pole and come to an end at the South Pole. The magnet's strength is greatest close to its poles. The lines are distinct and do not intersect.

To know more about magnets:

https://brainly.com/question/11902971

#SPJ4

The electric potential difference between the point at the center of the ring and a point on its axis ΔV is  4kQ/R.

Electric potential, the amount of work required to move a unit charge from a reference point against an electric field to a particular point. The reference point is usually ground, but any point that is not subject to electric field charges can be used. potential difference .

Given the data in the question;

electric potential at the center of the ring V₀ = kQ / R

4 point charge are on the circle so

V = 4Qk/R is the electric potential  difference at the center of the circle.

know more  about electric potential click here;

https://brainly.com/question/24078333

#SPJ4

a) The length of the rope is π/4 meters. b) The speed of the waves on the rope is 6π m/s. c) The mass of the rope is 0.485 kg. d) For the third harmonic, the period of oscillation is π/6 seconds.

a) The displacement of the rope oscillates between -0.1 and 0.1 meters. The length of the rope is half of the wavelength of the standing wave pattern, which is given by λ = 2L/n, where L is the length of the rope and n is the harmonic number. For the second harmonic, n = 2, so we have:

λ = 2L/2 = L

The wavelength is π/2 meters, so the length of the rope is:

L = λ/2 = (π/2)/2 = π/4 meters.

b) The speed of the waves on the rope can be determined from the wave equation, v = fλ, where v is the speed of the waves, f is the frequency, and λ is the wavelength. The frequency of the wave is 12 Hz (since it is the second harmonic), so we have:

v = fλ = 12 × (π/2)/2 = 6π m/s.

c) The mass of the rope can be calculated using the formula for the linear density of a string, μ = m/L, where μ is the mass per unit length, m is the total mass of the rope, and L is the length of the rope. The tension in the rope is 232 N, so we have:

v = √(T/μ)

μ = T/v^2 = 232/(6π)^2 = 0.616 kg/m

The mass of the rope is:

m = μL = 0.616 × π/4 = 0.485 kg.

d) For the third harmonic, n = 3, so the wavelength is:

λ = 2L/3

The period of oscillation is given by T = 1/f, where f is the frequency. The frequency for the third harmonic is:

f = v/λ = v/(2L/3) = 3v/2L = 9f0/2,

where f0 is the fundamental frequency (f0 = v/2L). Therefore, the period is:

T = 1/f = 2/(9f0) = 2L/9v = π/(9f0) = π/6 seconds.

Learn more about wavelenghts here: brainly.com/question/13533093

#SPJ4

Complete question:

A rope, under a tension of 232n and fixed at both ends, oscillates in a second-harmonics standing wave pattern. the displacement of the rope is given by
y=0.1sin( πx/2 )sin12πt.
where x = 0 at one end of the rope, x is in meters, and t is in seconds.
a) What is the length of the rope?
b) What is the speed of the waves on the rope?
c) What is the mass of the rope?
d) If the rope oscillates in a third harmonic standing wave pattern, what will be the period of oscillations?

The net work is done just on crate as it is moved across the uneven part of the floor is W= 882 N.

F= 282 N

μk =0.351 :coefficient of kinetic friction

g = 9.8 m/s² : acceleration due to gravity

Crate weight  (W)

W= m*g

W= 90kg*9.8 m/s²

The work W is equivalent to the force f twice a distance d, or W = fd, to represent this idea numerically. Work is defined as W = fd cos if the force is exerted at an angle to the displacement.

The resistive friction force (Fr) is divided by the normal or perpendicular force (N) pushing both objects together to produce the friction coefficient (fr), which is a numerical value. It can be described by the formula fr = Fr/N. Keep the block stationary in its horizontal position. the box was subjected to the floor's frictional force as a result is 110 N.

To know more about coefficient of friction visit

brainly.com/question/14121363

#SPJ1

The assertion made by the path-goal theory, that employees who feel a strong need for identification choose directive leadership, is untrue.

According to the path - goal leadership theory of leadership, a party's traits and habits can have an immediate impact on the satisfaction, drive, and output of their team. To be more precise, a leader's effectiveness can be assessed by their capability to foster the satisfaction, objectives, and capabilities of their subordinates.

Richard House

The Path-Goal theory, developed by Richard House in 1971, is his take on a situational theory of leadership. The behaviour of leaders is based on how satisfied, motivated, and effective their followers are, according to House's idea.

To know more about path goal theory visit:

https://brainly.com/question/4679152

#SPJ1

C is the duration of the heartbeat in seconds, whereas m is the kilos of the animal. The decrease in is C'(90) occurs at a rate of 0.13 sec kg1.

A known quantity of inertia, an essential characteristic of all matter, is known as mass in physics. The resistance a body of substance offers to either a modification in its movement or location as a result of the force that is applied is what it is in essence.

The amount of substance in a thing is measured by its mass. Its mass will remain constant regardless of where it is situated in the vast universe. The amount of gravitational force acting on an object is measured by its heaviness, on the other hand.

C(m) = 18 m0.23 sec

C(m = 90 kg) = 18 (90)0.23 sec

= 50.67 sec

C (m) = 18m0.23

C' m = dc/dm

= 18 (0.23) m0.23⁻¹

= 4.14 m⁻⁰·77

C' (90kg) = 0.13 sec kg⁻¹

To know more about mass visit:

https://brainly.com/question/18064917

#SPJ4

Answer:

Explanation:

The work-energy theorem states that the net work done by the forces on an object equals the change in its kinetic energy.

Work done = 335-125=110

Power=work done/time = 110/2.3 = 47.83 watts

The correct system that can be classified as a closed system in this scenario is (C). A system consisting of the block and spring.

A closed system is one that does not exchange matter or energy with its surroundings. In this scenario, the block and the spring are the only objects that interact with each other, and there is no energy or matter exchange with the surroundings. Therefore, the system consisting of the block and spring can be considered as a closed system. Options A and B are incorrect because they do not include the spring or the block, respectively, both of which are essential components of the system. Option D is incorrect because it includes the Earth, which is not part of the system and can exchange matter and energy with the block and spring.

Learn more about closed system here brainly.com/question/29991263

#SPJ4

Kirchhoff's laws are fundamental principles in electrical circuit theory.

Your question is incomplete but you seem to want to know something about Kirchhoff's laws hence I will describe it generally.

Kirchhoff's laws are fundamental principles in electrical circuit theory. Kirchhoff's first law, also known as the law of conservation of current, states that the sum of currents entering any node or junction in a circuit must be equal to the sum of currents leaving that node.

Kirchhoff's second law, also known as the voltage law, states that the sum of voltage drops around any closed loop in a circuit must be equal to the sum of the voltage sources in that loop. These laws are used to analyze and design electrical circuits.

Learn more about Kirchhoff laws:https://brainly.com/question/30400751

#SPJ1

The correct statements that describe elements are:

An element is a pure substance made up of only one type of atom. The elements are the basic building blocks of matter and make up everything around us.

There are 118 known elements, which are organized on the periodic table based on their atomic number, electron configurations, and chemical properties.

Each element has unique properties and is defined by its atomic number, which is the number of protons in its nucleus.

Some examples of elements include;

Learn more about elements here: https://brainly.com/question/18096867

#SPJ1

The electric field at x = 15 cm due to the given electric dipole of two charges ±2.5 µC separated by 1.0*10^-4m and centred on the origin, oriented along the x axis, is approximately 8.8×10^4 N/C, directed along the negative x-axis.

An electric dipole is a pair of electric charges of equal magnitude but opposite sign that are separated by a small distance. The dipole has a net electric charge of zero because the charges are equal and opposite, but it has a permanent electric dipole moment due to the separation between the charges.

The dipole moment is a vector that points from the negative charge to the positive charge and has a magnitude equal to the product of the charge magnitude and the distance between the charges. The dipole moment is often denoted by the symbol "p" and has units of coulomb-meters (c.m).

Electric dipoles are important in many areas of physics and engineering, as they play a role in a wide range of phenomena, such as the interaction of molecules with electric fields, the behaviour of capacitors, and the generation and propagation of electromagnetic waves. They can also be used to create and control electric fields in various applications, including in electrical circuits, in sensors, and in medical devices.

To calculate the electric field at a distance of x = 15 cm from the origin, we need to use the formula for the electric field due to an electric dipole, which is:

E = (1/4πε₀) [2p cosθ / r³]

where ε₀ is the permittivity of free space, p is the dipole moment, θ is the angle between the dipole moment and the position vector, and r is the distance from the dipole to the point where we want to find the electric field.

In this problem, the electric dipole is oriented along the x-axis, which means that the angle θ between the dipole moment and the position vector is zero. We can therefore simplify the formula to:

E = (1/4πε₀) [2p / r³]

where r is the distance from the origin to the point where we want to find the electric field.

The dipole moment is given by:

[tex]p = qd[/tex]

where q is the magnitude of each charge in the dipole and d is the separation between the charges. In this case, q = ±2.5 µC and d = 1.0×10^-4 m, so:

p = (2.5 µC)(2d) = 5 µC·m

Now, substitute the values of p and r into the formula to find the electric field at x = 15 cm:

E = (1/4πε₀) [2p / r³] = (1/4πε₀) [2(5 µC·m) / (0.15 m)³]

Using the value of ε₀ = 8.85×10^-12 C²/N·m², we can evaluate this expression to get:

E = (9×10^9 N·m²/C²) [10 / (0.15 m)³] ≈ 8.8×10^4 N/C

Therefore, the electric field at x = 15 cm due to the given electric dipole is approximately 8.8×10^4 N/C, directed along the negative x-axis.

To know more about Electric Dipole, visit:

https://brainly.com/question/14553213

#SPJ4

The kinematic equation states that a ball must be thrown horizontally from the ground at a speed of 31.30 m/s in order to reach a height limit of 50 m.

Here, we knew that when a ball is hurled vertically upward at maximum height with some velocity, it decelerates to zero and returns to the earth with some velocity. Here, we must apply the calculation for the maximum height when moving vertically upward. Maximum height indicates zero final velocity.

Gravity causes a downward vertical acceleration with a magnitude of 9.8 m/s/s. A projectile's vertical velocity changes by 9.8 m/s.A projectile's vertical motion is unrelated to its horizontal motion.

To know more about velocity visit :

https://brainly.com/question/18084516

#SPJ4

The intermolecular forces that would occur between glycine and water include hydrogen bonding and dipole-dipole interactions.

Glycine is a polar molecule that contains both polar functional groups (an amino group and a carboxyl group) and a nonpolar side chain (a hydrogen atom). Water is also a polar molecule due to its bent shape and polar O-H bonds.

When glycine is mixed with water, it can form hydrogen bonds with water molecules through the hydrogen bonding sites on the amino and carboxyl groups of glycine. The hydrogen bonding sites on the amino and carboxyl groups of glycine can form hydrogen bonds with the partially negative oxygen atoms of water molecules.

Additionally, the polar nature of glycine can also cause dipole-dipole interactions with water molecules. The polar amino and carboxyl groups of glycine have partial positive and negative charges that can interact with the partially positive and negative charges on the water molecules.

Learn more about hydrogen bonds here brainly.com/question/1619599

#SPJ4

The sun is not located at the center of an elliptical orbit, but is offset somewhat toward one of its ends - True.

The Sun is not relatively at the center of a earth's elliptical route. An cirque has a point a little bit down from the center called the" focus". The Sun is at the focus of the cirque. Because the Sun is at the focus, not the center, of the cirque, the earth moves near to and further down from the Sun every route. The close point in each route is called perihelion. The far down point is called aphelion.

The Sun isn't located at the center of an elliptical route, but is neutralize kindly toward one of its ends. The Greek champion Claudius Ptolemaeus ( Ptolemy) tutored that all heavenly bodies moved in perfect indirect routeways centered on the Earth.

Learn more about Sun's Elliptical orbit:

https://brainly.com/question/15656021

#SPJ4

The electric field inside both capacitors = 1666.67V/m.

The electric field inside a capacitor can be calculated using the formula

E = V/d

where E is the electric field, V is the potential difference between the plates, and d is the distance between the plates.

a) For capacitor #1, the potential difference between the plates is 5 volts - (-5 volts) = 10 volts.

The distance between the plates is 6mm or 0.006m.

Therefore, the electric field inside capacitor #1 is:
E = V/d = 10 volts / 0.006m = 1666.67 V/m

b) For capacitor #2, the potential difference between the plates is 320 volts - 310 volts = 10 volts.

The distance between the plates is also 6mm or 0.006m.

Therefore, the electric field inside capacitor #2 is:
E = V/d = 10 volts / 0.006m = 1666.67 V/m

In conclusion, the electric field inside both capacitors is 1666.67 V/m.

To know more about electric fields, refer here:

https://brainly.com/question/8705524#

#SPJ11

At the following speeds, five bicycles are travelling: 5.4 m/s, 6.0 m/s, 5.9 m/s, 6.1 m/s, and 7.0 m/s. These speeds, which are expressed in metres per second, are the cyclists' respective velocities.

Speed is defined in physics as the rate at which a distance changes over time. A scalar quantity with magnitude but no direction, it has neither. In other terms, speed is simply the rate of a moving thing. The answers to the question's bikers' speeds are given in metres per second (m/s). A number of variables, including the force applied, the surface it is on, the presence of friction or air resistance, and the object's weight, can have an impact on an object's speed. It's critical to comprehend speed and how it relates to other physical characteristics in a variety of industries, such as engineering, sports, and transportation.

Learn more about  speeds here:

https://brainly.com/question/8881791

#SPJ4

Water's high specific heat capacity helps it resist changes in temperature, making it a useful tool for organisms to regulate their body temperature.

Water helps regulate body temperature through several mechanisms.

In addition, water's high specific heat capacity allows it to resist changes in temperature, which helps the body maintain a constant internal temperature even in the face of external temperature fluctuations.

To know more about body temperature regulation by water, visit:

https://brainly.com/question/8074264

#SPJ1

The maximum height achieved by the body is h = v√(1/2g).

The formula to find the potential energy near earth's surface is -

U = mgh

Given is to identify the maximum height to which the object will rise.

Using the energy conservation, we can write -

1/2mv² = mgh

1/2v² = gh

h = v√(1/2g)

Therefore, the maximum height achieved by the body is h = v√(1/2g).

To solve more questions on energy conservation, visit the link-

brainly.com/question/29014197

#SPJ1

The statements below correctly describe valence bond theory:

a). covalent bonds are formed when orbitals of two atoms overlap and share a pair of electrons.

b). maximizing the overlap makes for stronger bonds (lower potential energy).

c). atoms will mix together (hybridize) valence orbitals to maximize overlap.

Chemistry's valence bond theory describes how atoms establish chemical bonds with one another. This hypothesis states that the sharing of a pair of electrons by two atoms results in the formation of a chemical bond. These electrons are thought to be in a bonding molecular orbital, which is created when the valence atomic orbitals of the involved atoms overlap. The length, directionality, and strength of a chemical connection are all explained by the valence bond hypothesis. Additionally, it is employed to forecast the behavior of chemical reactions and the shape of molecules. Grasp the characteristics and behavior of compounds in chemistry requires an understanding of the valence bond theory.

To know more about valence bond theory, check out:

https://brainly.com/question/29546533

#SPJ4

The value of KB when KA and KC are given along with their thickness is calculated to be 1.57 W/m.K.

The value of thermal conductivity kA is given as = 20 W/m.

The value of thermal conductivity kC is given as = 50 W/m.

The thickness LA is given as = 0.30 m.

The thickness LB is given as = 0.15 m.

The thickness LC is given as = 0.15 m.

Temperature on the inner surface Ts,0 = 20 degrees

Temperature on the outer surface Ts,i = 600 degrees

Temperature at infinity = 800 degrees

Convection coeffiecient h = 25W/m²

Thermal resistance due to conductivity,

R = L/KA

Thermal resistance due to heat transfer coefficient

R' = L/KA

We know that heat transfer Q

Q = ΔT /Rth

By equating heat,

(600 - 20)/[LA/A KA + LB/B KB + LC/C KC] = (800 - 20)/[LA/A KA + LB/B KB + LC/C KC + 1/Ah]

(600 - 20)/[0.3/20 + 0.15/B KB + 0.15/50] = (800 - 20)/[0.3/20 + 0.15/B KB + 0.15/50 + 1/25]

580/[0.015 + 0.15/ KB + 0.003] = 780/[0.015 + 0.15/ KB +0.003 + 0.04]

580/(0.018 + 0.15/ KB) = 780/(0.058 + 0.15/ KB)

580(0.058 + 0.15/ KB) = 780(0.018 + 0.15/ KB)

33.64 + 87/KB = 14.04 + 117/KB

33.64 - 14.04 = 117/KB - 87/KB

19 = 1/KB (117 - 87)

19 KB = 30

KB = 30/19 = 1.57 W/m.K

To know more about thermal conductivity:

https://brainly.com/question/13450387

#SPJ4

Yes, it is true, the longer a pendulum is, the longer it takes to swing. Therefore, when the pendulum of a clock is lengthened, the clock slows down.

The length of a pendulum influences the time it takes to complete one swing, which is referred to as the period. The pendulum swings more slowly and has a longer period as it gets longer. A clock slows down when the pendulum is stretched because it takes longer for each swing to be completed. Similar to how the clock speeds up when the pendulum is shorter, it swings quicker as well. The operation of pendulum clocks and other timekeeping instruments that employ pendulums to measure time is based on this idea.

A pendulum's period, or how long it takes to complete one full swing back and forth, can be used to define how it moves. The length, gravitational acceleration, and angle of displacement are some of the variables that affect a pendulum's period. However, the length of a particular pendulum is what essentially determines its period.

The period of a basic pendulum is described mathematically as

T = 2(L/g), where T is the period, L is the length of the pendulum, and g is the gravitational acceleration.

As you can see, the square root of the length and the period are precisely proportional. This implies that the period likewise grows as the pendulum's length does.

The pendulum offers a means of controlling the clock's timekeeping mechanism. The clock's hands are moved by a gear train that is moved back and forth by the pendulum. The pendulum's length can be changed by the clockmaker to alter the clock's rate of movement. The pendulum can be shortened to make it swing more quickly and speed up the clock if it is running quickly. The pendulum can be stretched to make it swing more slowly and slow down the clock if it is operating slowly.

For more question on pendulum click on

https://brainly.com/question/26524032

#SPJ4

The value of c + a+b will be c = -8 for the given polar coordinates.

The polar coordinate system is a two-dimensional coordinate system in mathematics in which each point on a plane is determined by a distance from a reference point and an angle from a reference direction. The pole is the reference point, and the polar axis is the ray from the pole in the reference direction.

Given that the coordinates are a = 15 [326° from +x], b= 21 [192º from + x].

The value of a + b will be calculated as;-

c = a + b

c = ( 15 x cos(326) + 21 x cos(192)

c = 12.43  - 20.54

c = -8.11

Therefore, the solution for the coordinates is -8.11.

To know more about polar coordinates follow

https://brainly.com/question/14965899

#SPJ1

Because kinetic energy is directly proportional to the square of the velocity.

The increase in kinetic energy of an object is proportional to the square of its velocity.

This relationship is described by the equation;

KE = ¹/₂mv²

where;

When an object accelerates from 20 mph to 40 mph, its velocity increases by a factor of 2. Squaring this factor of 2 results in an increase in kinetic energy by a factor of 4 (2² = 4).

Therefore, the kinetic energy of the object is quadrupled as it increases its velocity from 20 mph to 40 mph.

Learn more about kinetic energy here: https://brainly.com/question/8101588

#SPJ1

The complete question is below:

Which statement best explains why accelerating a car from 20 mph to 40 mph quadruples its kinetic energy? Hint: look at the equation for KE.

A. Because kinetic energy is directly proportional to the cube of the velocity.

B. Because kinetic energy is directly proportional to the square of the velocity.

The statement best explains why accelerating a car from 20 mph to 40 mph quadruples its kinetic energy is:

Kinetic energy is directly proportional to the square of the velocity.

The correct option is A.

The energy that an object has as a result of motion is known as kinetic energy. It is described as the effort required to move a mass-determined body from rest to the indicated velocity. The body holds onto the kinetic energy it acquired during its acceleration until its speed changes.

Mathematically:

Kinetic energy = ¹/₂ mass * velocity²

Hence, when the velocity of a body is doubled, the kinetic energy of the body quadruples.

Learn more about kinetic energy at: https://brainly.com/question/30337295

#SPJ1

Complete question:

Which statement best explains why accelerating a car from 20 mph to 40 mph quadruples its kinetic energy? Hint: look at the equation for KE.

Kinetic energy is directly proportional to the square of the velocity.

Kinetic energy is inversely proportional to the square of the velocity.

Kinetic energy is directly proportional to the fourth power of the velocity. Kinetic energy is inversely proportional to the fourth power of the velocity.

The plate is about 12.65 units away from the top of the bowl, with a contact area of 48 square units on the bottom of the bowl.

The plate is parallel to the rim of the bowl, it is not in contact with the curved surface of the bowl. The area of the plate in contact with the bottom of the bowl can be calculated as the product of its dimensions: 6 x 8 = 48 square units.

The distance between the bottom of the bowl and the top of the plate can be calculated using the Pythagorean theorem. The height of the bowl is the radius, which is 13 units. The width of the bowl can be calculated as the diameter, which is twice the radius, or 26 units. The width of the plate is 6 units, so the distance between the bottom of the bowl and the top of the plate can be calculated as,

sqrt(13^2 - 3^2) = sqrt(160) = 12.65 units

To know more about the hemispherical bowl, here

brainly.com/question/13645703

#SPJ4

The correct answer is option B.

In the diagram below, point P is located in the electric field between two oppositely charged parallel plates. Compared to the magnitude and direction of the electrostatic force on an electron placed at point P, the electrostatic force on a proton placed at point P has B) the same magnitude, but the opposite direction.

Electrostatic force is a type of force that occurs between two charged particles. The magnitude of this force is determined by the amount of charge on each particle and the distance between them. The direction of the force is determined by the sign of the charges.

If the charges are opposite, the force is attractive and if the charges are the same, the force is repulsive.

In the case of an electron and a proton placed at point P between two oppositely charged parallel plates, the magnitude of the electrostatic force will be the same because they both have the same amount of charge (albeit with opposite signs).

However, the direction of the force will be opposite because the electron and proton have opposite charges.

Therefore, the correct answer to, Compared to the magnitude and direction of the electrostatic force on an electron placed at point P, the electrostatic force on a proton placed at point P has B) the same magnitude, but the opposite direction.

To know more about the electric fields, refer here:

https://brainly.com/question/8705524#

#SPJ11

The stated statement indicates that Scales less than 1:24,000 are 1:900,000 and 1:24,000, respectively.

The correct option is B.

a graded object, particularly when used as a rule or measure: a set of markings or points spaced apart at defined intervals used to measure distances, such as: a relationship between the distances shown on a map and their corresponding actual distances (such as the height of the mercury in a thermometer)

To visually depict the scale of a map, maritime chart, engineering design, or architectural drawing, use a linear scale, also known as a bar scale, scale bar, or graphic scale.

To know more about scale visit:

https://brainly.com/question/1287267

#SPJ4

Car A's time to halt, tA = 0.33T. This is the right response to the question that was asked. The answer has two significant figures.

Provide an illustration of two vehicles with similar speeds but differing velocities. Example: Two 40 km/hr automobiles, one heading east and the other north.

Equal accelerations do not necessarily imply identical velocities, and vice versa. For instance, even if both of your cars have the same acceleration, if one of them accelerates first, it will certainly go more quickly than the other.

To learn more about acceleration visit:

brainly.com/question/2303856

#SPJ1