The James Webb Space Telescope (JWST) is designed to take observations in the infrared part of the electromagnetic spectrum.
What is energy band?In physics, an energy band is a range of allowed energies that electrons in a solid material can have. In a solid material, the electrons are confined to specific energy levels, which depend on the properties of the atoms and the arrangement of the atoms in the crystal lattice. These energy levels are often referred to as "bands," because they form continuous bands of allowed energies rather than discrete energy levels. The most important energy bands in solid materials are the valence band and the conduction band. The valence band is the range of energy levels that the electrons occupy when the material is in its ground state, while the conduction band is the range of energy levels that the electrons can occupy when they are excited to a higher energy state. In an insulator, there is a large energy gap between the valence band and the conduction band, so it is difficult for electrons to move from the valence band to the conduction band and conduct electricity. In a conductor, there is only a small energy gap between the valence band and the conduction band, so electrons can move freely from the valence band to the conduction band and conduct electricity. In a semiconductor, the energy gap is intermediate, so the conductivity can be controlled by doping or applying a voltage.
Here,
Specifically, it will operate in the wavelength range of 0.6 to 28.5 micrometers, which is longer than the visible light range that the Hubble Space Telescope observes. The infrared band is particularly useful for studying the formation of galaxies and stars, the evolution of the universe, and the properties of exoplanets, among other things.
To know more about energy band,
https://brainly.com/question/9762526
#SPJ1
You use symbols to make it easier to write certain things,
such as $25.08 instead of twenty-five dollars and eight cents.
On the following lines, write some symbols you may use to
make writing easier.
The examples of symbols that can be used include
"+" for addition
"-" for subtraction
"*" or "×" for multiplication
"/" or "÷" for division
"%" for percentage
"$" for dollars
"#" for number (e.g. #1 = number one)
"&" for and
"!" for exclamation or negation.
What is a symbol?A mark, sign, or term that denotes, denotes, or is taken to denote an idea, an item, or a relationship is known as a symbol. By connecting seemingly unrelated ideas and events, symbols help people look beyond the known and the visible.
Symbols are used to communicate ideas and beliefs by using words, noises, gestures, thoughts, or visual representations.
Learn more about symbol on:
https://brainly.com/question/29886201
#SPJ1
What is the type of polyester that gets formed in the reaction between glycerol and phthalic anhydride?
The type of polyester that is formed in the reaction between glycerol and phthalic anhydride is known as glyceryl phthalate, or GP for short.
GP is a condensation polymer that is formed by the reaction of glycerol and phthalic anhydride. The reaction involves the formation of ester bonds between the hydroxyl groups of glycerol and the carboxylic acid groups of phthalic anhydride. The resulting polymer has good flexibility, softness, and low toxicity, which make it useful for certain applications, such as in the production of plasticizers for PVC.
However, glyceryl phthalate is not as widely used as other polyesters like polyethylene terephthalate (PET), which is formed from the reaction of ethylene glycol and terephthalic acid, and has much broader applications.
To know more about the phthalic anhydride, here
brainly.com/question/12972518
#SPJ4
Please. Answer asap
Answer:
the answer is D.
Explanation:
what vsepr geometry is most likely for the carbon atom in this transition state?
Four of the valencies on the tetrahedron of carbon point in the directions of its four angles. The tetrahedron's core is made up of carbon atoms. Each valency has a 10928′ bond angle.
What is carbon atom?A chemical element with the symbol C and atomic number 6, carbon is derived from the Latin word carbo, which means "coal." It is nonmetallic and tetravalent, making four electrons available to create covalent chemical bonds in its atom. It is a member of group 14 on the periodic table.A property known as catenation allows the element carbon to create lengthy chains using just its own atoms. It is one of the few elements that has such capability. It is feasible to create a very large number of molecular compounds by combining this capability with the power of the carbon-carbon bond.Carbon can be found in many various forms, such as in coal, carbon dioxide molecules, and living things.To learn more about carbon atom refer to:
https://brainly.com/question/27860158
#SPJ4
name the long, straight-chain type of starch that makes up about 20% of digestible starch.
Sucrose is long, straight-chain type of starch that makes up about 20% of digestible starch.
Sucrose, a disaccharide, is a sugar made out of glucose and fructose subunits. It is created normally in plants and is the primary constituent of white sugar. It has the atomic equation C₁₂H₂₂O₁₁.
For human utilization, sucrose is extricated and refined from one or the other sugarcane or sugar beet. Sugar plants - commonly situated in tropical districts close where sugarcane is developed - squash the stick and produce crude sugar which is delivered to different production lines for refining into unadulterated sucrose. Sugar beet production lines are situated in mild environments where the beet is developed, and process the beets straightforwardly into refined sugar.
Starch or amylum is a polymeric sugar comprising of various glucose units joined by α- - D glycosidic bonds. This polysaccharide is delivered by most green plants for energy capacity. Around the world, it is the most considered normal starch in human weight control plans, and is contained in huge sums in staple food sources like wheat, potatoes, maize, rice, and cassava.
To know more about sucrose,visit here:
https://brainly.com/question/28869238
#SPJ4
a 1.375 g sample of sugar found seaweed, is burned completely in oxygen to give 993 g of carbon dioxide &nd 0.9519 g of water: Determine the empirical formula ofthis sugar (C: 12 gmol H: gmoL, 0.16 grmol) A. C2H7 B. CHO
C. C2H6O
D. C3H7O3
E. CH2O
The 1.375 g sample of sugar found seaweed, is burned completely in oxygen to give 1.993 g of carbon dioxide and 0.9519 g of water . The empirical formula of this sugar is C₃H₇O₃.
Moles of the C in the carbon dioxide = 1 ( 1.933/ 44)
Moles of the C in the carbon dioxide = 0.0453 mol
Moles of the H in the water = 2 ( 0.9519 / 18 )
Moles of the H in the water = 0.106 mol
Mass of the oxygen = 1.375 - (0.0453 ×12 ) - 0.016 × 1
Mass of the oxygen = 0.724 g
The moles of the oxygen = mass / molar mass
= 0.724 / 160
= 0.0453 mol
Dividing by the smallest one , we get :
C = 1
H = 2.3
O = 1
Multiplying by three , we get :
The empirical formula is C₃H₇O₃.
To learn more about empirical formula here
https://brainly.com/question/14044066
#SPJ4
Convert 0.0098 g to micrograms (abbreviated as µg or mcg) using dimensional analysis. Show all your work and explain each step in the process.
The value of 0.0098 g in micrograms using dimensional analysis is 98 micrograms.
What is the value of 0.0098 g in micrograms using dimensional analysis?Dimensional analysis is a mathematical technique used to translate measuring units across different systems.
To convert 0.0098 g to micrograms, we can use dimensional analysis by multiplying the given weight in grams by a conversion factor.
The conversion factor that can be used is 1 microgram = 10⁻⁶ g.
Using this conversion factor, we can write the following equation:
0.0098 g = 0.0098 g * (10⁶6 µg/1 g)
0.0098 g = 98 µg
Therefore, 0.0098 g is equal to 98 micrograms.
Learn more about dimensional analysis at: https://brainly.com/question/27931891
#SPJ1
is caco3 soluble in water
Calcium carbonate( [tex]CaCO_{3}[/tex] )appears as white, odorless powder or colorless crystals. Practically insoluble in water.
[tex]CaCO_{3}[/tex] is the chemical formula for calcium carbonate, an inorganic substance. Calcite is another name for it. It is located in the earth's crust. It comes in a wide variety of shapes, including marble and limestone. It is a non-toxic, odourless gas that is typically found as a white mineral in marbles, chalks, and limestones. Eggshells, seashells, oyster shells, snail shells, corals, etc. all contain this chemical as their primary ingredient.
Strong ionic substance that contains calcium carbonate. The atoms are bound together very tightly because of the extremely strong electrostatic force of attraction. It becomes challenging to sever the bonds because of how powerful these attractions are. When calcium carbonate is dissolved in water, this is what happens.
Bonds being very strong do not break, leading to calcium carbonate being insoluble in water. Moreover ionization of calcium carbonate is not taking place in water. And so calcium carbonate is insoluble in water.
know more about soluble in water click here;
https://brainly.com/question/29857840
#SPJ4
what amino acid performs the nucleophilic attack during the chymotrypsin mechanism?
The Ser is an amino acid that participates in the chymotrypsin mechanism's nucleophilic assault.
What is an amino acid?Both amino and carboxylic acid functional groups can be found in amino acids, which are organic molecules. Alpha-amino acids, which make up proteins, are by far the most significant amino acids, even though there are hundreds of them in nature. In the genetic code, there are only 22 alpha amino acids. Amino acids are the atomic units of protein synthesis. Proteins and amino acids serve as the foundation of life. Amino acids are the byproducts of protein digestion or breakdown. Amino acids are converted into proteins in the human body, which aids in the process of digestion. The fundamental components of proteins are amino acids. A carboxylic group and an amino group are both present in their molecule.To learn more about amino acid refer to:
https://brainly.com/question/24106148
#SPJ4
What if you had rubber bands, wood chips, straight pins, aluminum foil, and glass beads? Using a property of matter, classify these objects. Show your results in a table
Here's a table that classifies the objects based on their physical properties:
Object Property
Rubber bands Elasticity
Wood chips Hardness
Straight pins Sharpness
Aluminum foil Malleability
Glass beads Smoothness
What are physical properties?Physical properties are characteristics that describe the basic nature of an object, such as its shape, size, texture, and other observable features, without reference to its composition.
The physical properties listed in the table are just a few examples of the ways in which these objects can be described and classified based on their physical characteristics.
Learn more about Physical properties at:
https://brainly.com/question/11445521
#SPJ1
Each different signal in a 1H NMR spectrum represents a different__________of hydrogen atom. Hydrogen atoms that are_______________give the same signal.
Each different signal in a 1H NMR spectrum represents a different chemical environment of hydrogen atom. Hydrogen atoms that are in the same chemical environment or have the same electronic and structural environment give the same signal in the NMR spectrum.
Write a note on this phenomenon of the NMR spectrum.
This is because the resonance frequency of a hydrogen nucleus is affected by the local magnetic field, which in turn is influenced by the electronic and structural properties of the molecule surrounding the hydrogen atom. By analyzing the number, intensity, and splitting pattern of the signals in the 1H NMR spectrum, it is possible to obtain valuable information about the structure and composition of a molecule or compound.
Hence, the answer is, Each different signal in a 1H NMR spectrum represents a different chemical environment of hydrogen atom. Hydrogen atoms that are in the same chemical environment or have the same electronic and structural environment give the same signal in the NMR spectrum.
To learn more about 1H NMR spectrum, follow the link:
https://brainly.com/question/29389817
#SPJ4
Question: Determine The Product Formed When Each Compound Is Treated With Br_2 And FeBr_3. Drag The Atom Labels To Their Appropriate Positions.
When m-xylene is brominated with bromine while ferric bromide is present, the product is 1-bromo-2,4-dimethylbenzene.
What products are formed when the following compound is treated with bromine in the presence of [tex]$\mathrm{FeBr}_3$[/tex]?M-bromonitrobensene is the main product created when nitrobenzene is treated with [tex]$$Br_2[/tex] in the presence of [tex]$\mathrm{FeBr}_3$[/tex].
If [tex]$\mathrm{FeBr}_3$[/tex] or [tex]$$AlBr_3[/tex] are not added to produce the electrophile Br+, benzene will not react with [tex]$$Br_2[/tex] ([tex]$\mathrm{FeCl}_3$[/tex] and [tex]$$AlCl_3[/tex] can also be used, but may contaminate the products with chlorine). There won't be any reaction if the metal chloride is absent, hence there won't be any colour change.
When m-xylene is brominated with bromine while ferric bromide is present, the product is 1-bromo-2,4-dimethylbenzene. Since methyl groups are ortho para directing, the replacement takes place at a site that is ortho to one methyl group and para to another methyl group in this electrophilic aromatic substitution reaction.
The complete question is:
What product are formed when the following compound is treated with [tex]$\mathrm{Br}_2$[/tex] in the presence of [tex]$\mathrm{FeBr}_3$[/tex]?
To learn more about compound refer to:
https://brainly.com/question/26487468
#SPJ4
Proton A couples to Proton B. Proton A posseses a J -value of 3.0 Hz. What do you expect the J -value Proton B posseses to be? 3.0 Hz Greater than 3.0 Hz Less than 3.0 Hz No J -value because coupling is only one-way
Proton A couples to Proton B. Proton A posseses a J -value of 3.0 Hz. What do you expect the J -value Proton B posseses to be 3.0 Hz. The correct answer is D.
In freely rotating groups, protons in anti-conformation have a frequency range of J= 5–12 Hz while those in gauche conformation have a range of J= 2-4 Hz. Option D is correct as a result.
What is the proton's J-value?The J value of a quartet may always be determined by counting the distances between the various lines. When working with actual data, it is preferable to utilize the average line spacing, which is determined by dividing the distance between the first and last lines by three.
The coupling constant, usually denoted as J, is used to calculate the strength of the interaction between a pair of protons in an atom.
It is designated by the letter "J" with frequency units and is mostly used to measure the interaction or strength of the splitting effect (Hz).
In the simplest case, the coupling constant for a doublet is equal to the difference between its two peaks.
As a result, Proton B has a J-value of 3.0 Hz.
Your question is in complete but most probably your full question was
Proton A couples to Proton B. Proton A posseses a J-value of 3.0 Hz. What do you expect the J-value Proton B posseses to be? a) Less than 3.0 Hz b) Greater than 3.0 Hz c) No J-value because coupling is only one-way d) 3.0 Hz
Learn more about Proton here:
brainly.com/question/1252435
#SPJ4
Oxalic acid is a compound used in paints. A sample of oxalic acid was found to contain 1.94 g of carbon, 0.160 g of hydrogen and 5.16 g of oxygen. The molar mass of oxalic acid is 90.0 g/mole. Determine the empirical formula and the molecular formula of this compound. (show work: use labels)
The empirical formula of oxalic acid is CHO₂. The molecular mass is 90 g/mol. Then, its molecular formula is C₂H₂O₄.
What is empirical formula ?The empirical formula of a compound is derived from the number of moles of each element present and converting their ratio of number of moles into whole numbers.
The molecular formula is derived by dividing the molecular mass by the formula mass and multiply the empirical formula with the obtained integer.
Given mass of carbon =1.94 g
no.of moles = 1.94/12 = 0.161
mass of H = 0.160
no.of moles = 0.160
mass of oxygen = 5.16 g
no.of moles = 5.16 g/16 = 0.322
Now, divide the ratio by 0.160 to convert them to whole numbers, we get the empirical formula CHO₂.
Given molar mass = 90 g/mol
Formula mass = 12 + 1 + 32 = 45 g
then, 90/45 = 2
multiply the formula mass by 2 we get the molecular formula, C₂H₂O₄.
Find more on molecular formula:
brainly.com/question/28647690
#SPJ9
What is difference between cis and trans isomers?
The Cis isomers are the molecules with the same connectivity of the atoms. The Trans isomers is the molecules with the same side of the groups placed on the opposite sides of the double bond.
The Cis isomers are the molecules that have the same connectivity of the atoms. The feature is the same side of the groups placed on the same side of the double bond. The Trans isomers are the the molecules with same side of the groups placed on the opposite sides of the double bond.
Cis isomers are almost the polar compound. The Trans isomers are not the very polar one. Many of the trans isomers are the non-polar molecules.
To learn more isomers here
https://brainly.com/question/12796779
#SPJ4
500. ML of 0. 200 M HCl solution needs to be dilutied to 0. 150 M solution. How many mL water needs to be added?
To dilute the 0.200 M HCl solution to 0.150 M solution, 166.67 mL of water is needed to be added to the solution.
To dilute a solution, we can use the dilution equation:
M₁V₁ = M₂V₂
where M₁ and V₁ are the initial molarity and volume of the solution, and M₂ and V₂ are the final molarity and volume of the solution after dilution.
In this case, we are given M₁ = 0.200 M, V₁ = 500 mL, and M₂ = 0.150 M. We need to solve for V₂ to find the final volume of the solution after dilution, and then subtract V₁ from V₂ to find the amount of water that needs to be added.
0.200 M × 500 mL = 0.150 M × V₂
V₂ = (0.200 M × 500 mL) / 0.150 M
V₂ = 666.67 mL
So, the final volume of the solution after dilution should be 666.67 mL.
To find the amount of water that needs to be added, we can subtract the initial volume from the final volume:
666.67 mL - 500 mL = 166.67 mL
Therefore, we need to add 166.67 mL of water to the 500 mL of 0.200 M HCl solution to dilute it to a 0.150 M solution.
Learn more about dilution here: https://brainly.com/question/24881505.
#SPJ11
the atoms contain three types of sub-atomic particles - protons, neutrons, and electrons. Describe the structure of the beryllium atom
Answer:There are three subatomic particles: protons, neutrons and electrons. Two of the subatomic particles have electrical charges: protons have a positive charge while electrons have a negative charge. Neutrons, on the other hand, don't have a charge.
Explanation:
How do you calculate moles of salicylic acid?
To calculate the number of moles of salicylic acid, you need to know the mass of the sample and the molar mass of the compound.
The molar mass of salicylic acid (C7H6O3) is the sum of the atomic masses of all the atoms in the compound, which can be calculated using the periodic table of elements. The molar mass of the salicylic acid is:
(7 x 12.01 g/mol) + (6 x 1.01 g/mol) + (3 x 16.00 g/mol) = 138.12 g/mol
Once you have the molar mass of salicylic acid, you can use the following formula to calculate the number of moles:
Number of moles = Mass of sample (in grams) / Molar mass (in grams per mole)
For example, if you have a sample of salicylic acid that weighs 1.5 grams, you can calculate the number of moles as follows:
Number of moles = 1.5 g / 138.12 g/mol = 0.0109 moles
Therefore, the sample contains 0.0109 moles of salicylic acid.
To know more about moles here
https://brainly.com/question/26416088
#SPJ4
Select the appropriate pipette to use for each of the following volumes
A. 874 uL
B. 57 UL
C. 340 UL D. 15 pL
To select the appropriate pipette for each of the following volumes are P1000, P20, P200, microsyringe.
A. 874 uL (microliters) - A P1000 pipette would be appropriate for this volume. P1000 pipettes can dispense volumes ranging from 100 μL to 1000 μL.
B. 57 uL (microliters) - A P20 pipette would be appropriate for this volume. P20 pipettes can dispense volumes ranging from 2 μL to 20 μL.
C. 340 uL (microliters) - A P1000 pipette or a P200 pipette would be appropriate for this volume. P1000 pipettes can dispense volumes ranging from 100 μL to 1000 μL, and P200 pipettes can dispense volumes ranging from 20 μL to 200 μL. Since the volume is closer to 200 μL, a P200 pipette might be more appropriate in this case.
D. 15 pL (picoliters) - A microsyringe with a nanoliter or picoliter volume range would be appropriate for this volume. Microliter syringes are not appropriate for volumes in the picoliter range. The appropriate syringe size would depend on the accuracy and precision required for the experiment.
To know more about pipette here
https://brainly.com/question/28522043
#SPJ4
What is the Lewis structure of nitrogen?
The lewis structure of the nitrogen is as follows :
..
. N :
The atomic number of the nitrogen is 7. The electronic configuration of the nitrogen is as follows :
The electronic configuration of the nitrogen atom is 1s² 2s² 2p³.
the total number of the valence electrons that is the electrons in the outermost shell is 5. In the lewis structure of the nitrogen the valence electron are represented by the dot . therefore the lewis structure also be called the electron dot structure. Thus, the electron dot structure of the nitrogen is as follows :
..
. N :
To learn more about lewis structure here
https://brainly.com/question/20300458
#SPJ4
consider the elements, listed, found in the human body. which two are major components, making up at least 3% each of the human body?
The human body is composed of a diverse set of elements, but only a few of them make up the majority of its mass. The two major components of the human body, making up at least 3% each, are oxygen (O) and carbon (C).
Oxygen is the most abundant element in the human body, comprising about 65% of the total mass. It is essential for the body's metabolic processes, as it is a major component of many organic molecules, including carbohydrates, lipids, and proteins. Oxygen is also necessary for respiration, as it is used in the production of energy through the process of cellular respiration.
Carbon is the second most abundant element in the human body, making up about 18% of its total mass. It is the backbone of many organic molecules, such as carbohydrates, lipids, and proteins, and is the basis of all life on Earth. Carbon is also found in many minerals in the human body, such as calcium carbonate, which makes up bones and teeth.
Other elements that are present in the human body in smaller amounts include hydrogen (H), nitrogen (N), calcium (Ca), and phosphorus (P). Hydrogen is the most common element in the universe and is present in many organic molecules. Nitrogen is also found in organic molecules, such as amino acids and nucleic acids, and is essential for building and repairing tissue. Calcium and phosphorus are both important for building strong bones and teeth.
In summary, oxygen and carbon are the two major components of the human body, making up at least 3% each. These elements are essential for the body's metabolic processes, energy production, and the formation of organic molecules. While other elements are present in smaller amounts, they are also essential for the body's overall health and well-being.
To know more about human body: https://brainly.com/question/11738302
#SPJ4
Please help
A. giving 15.0 grams of N2, how many grams of NH3 would theoretically be produced
1) The theoretical yield is 18.02 g
2) The percent yield is 67%
3) The percent yield is 55.8 %
What is the theoretical yield?The balanced reaction equation is;
N2 + 3H2 ----> 2NH3
Number of moles of N2 = 15g/28 g/mol = 0.53 moles
If 1 moles of N2 produced 2 moles of NH3
0.53 moles of N2 will produce 0.53 * 2/1
= 1.06 moles
Theoretical yield = 1.06 moles * 17 g/mol
= 18.02 g
The percent yield = 12.1/18.02 * 100/1
= 67%
The percent yield = 19.8 g/35.5 g * 100/1
= 55.8 % as shown
Learn more about theoretical yield:https://brainly.com/question/14966377
#SPJ1
48g of Magnesium reacts with excess oxygen to produce 84g of magnesium oxide. Calculate how much magnesium oxide would be produced if 2g, 10, and 4kg were reacted with excess oxygen. 0.4 Moles of iron reacts with 0.3 moles of oxygen gas. Calculate the formula of the ir oxide produced and write a balanced equation for it.
For 2g of magnesium: 3.31 g
For 10g of magnesium: 16.59 g
For 4kg of magnesium: 6.63 kg
The balanced chemical equation for the reaction is:
2 Mg + O2 → 2 MgO
Step by step explanationThe balanced chemical equation for the reaction is:
2 Mg + O2 → 2 MgO
From the equation, we can see that 2 moles of magnesium react with 1 mole of oxygen to produce 2 moles of magnesium oxide. Therefore, we can calculate the amount of magnesium oxide produced for each given mass of magnesium as follows:
For 2g of magnesium:Moles of Mg = mass / molar mass = 2g / 24.31 g/mol = 0.0823 mol
Moles of MgO produced = Moles of Mg x (2 moles MgO / 2 moles Mg) = 0.0823 mol x 1 = 0.0823 mol
Mass of MgO produced = Moles of MgO produced x molar mass of MgO = 0.0823 mol x 40.31 g/mol = 3.31 g
For 10g of magnesium:Moles of Mg = mass / molar mass = 10g / 24.31 g/mol = 0.4116 mol
Moles of MgO produced = Moles of Mg x (2 moles MgO / 2 moles Mg) = 0.4116 mol x 1 = 0.4116 mol
Mass of MgO produced = Moles of MgO produced x molar mass of MgO = 0.4116 mol x 40.31 g/mol = 16.59 g
For 4kg of magnesium:Moles of Mg = mass / molar mass = 4000g / 24.31 g/mol = 164.47 mol
Moles of MgO produced = Moles of Mg x (2 moles MgO / 2 moles Mg) = 164.47 mol x 1 = 164.47 mol
Mass of MgO produced = Moles of MgO produced x molar mass of MgO = 164.47 mol x 40.31 g/mol = 6626.95 g or 6.63 kg
Calculation of Formula of Iron Oxide Produced:
According to the given information, 0.4 moles of iron reacts with 0.3 moles of oxygen gas. To determine the formula of the iron oxide produced, we need to first balance the chemical equation.
Fe + O2 → FeO
From the balanced equation, we can see that 1 mole of iron reacts with 1 mole of oxygen to produce 1 mole of iron oxide. Therefore, the ratio of moles of iron to moles of oxygen in the reaction is 1:1.
To do this, we can calculate the theoretical amount of moles of oxygen required to react completely with 0.4 moles of iron:
0.4 mol Fe × (1 mol O2 / 1 mol Fe) = 0.4 mol O2
Learn more on balanced chemical equation here
https://brainly.com/question/11904811
#SPJ1
The prefix that is added to the word autotroph to denote organisms which can use inorganic compounds in the environment to fix carbon dioxide with hydrogen atoms to make organic molecules is:_________
The prefix that is added to the word autotroph to denote organisms which can use inorganic compounds in the environment to fix carbon dioxide with hydrogen atoms to make organic molecules is: "chemo-"
As per the question given,
Have you ever wondered how some organisms survive in extreme environments where sunlight is scarce or absent? Well, there are certain organisms called autotrophs that are capable of producing their own food using inorganic substances through the process of photosynthesis. However, some autotrophs have taken it a step further and developed a unique ability to use inorganic compounds in their environment to produce organic molecules.
This process is known as chemosynthesis, and it is vital for the survival of certain organisms in environments like deep-sea hydrothermal vents, where sunlight cannot penetrate. The prefix that is added to the word autotroph to denote these organisms is "chemo-", which signifies the use of energy from inorganic chemical reactions instead of light energy. Chemoautotrophs are truly fascinating organisms that have adapted to survive in some of the harshest environments on our planet!
For such more questions on Atoms
https://brainly.com/question/6258301
#SPJ4
What is the stoichiometric ratio between the 20 mg band reactant and the product hydrogen gas in the reaction used to determine the molar volume of the gas?
The stoichiometric ratio between the 20 mg band reactant and the Product hydrogen gas is 1:1/2, simply 2:1. This means that 2 atoms of hydrogen are produced for every 1 atom of zinc consumed in the reaction.
What is Stoichiometric Coefficient?
A stoichiometric coefficient is a number that appears in front of a chemical species in a balanced chemical equation, representing the number of moles of that species that react or are produced in the reaction. These coefficients are used to ensure that the law of conservation of mass is obeyed in a chemical reaction, and that the same number and types of atoms are present on both sides of the equation.
The reaction used to determine the molar volume of a gas is typically the reaction between a metal and an acid to produce hydrogen gas, which is collected and measured. The stoichiometric ratio between the reactants and products in this reaction is:
metal + acid → salt + hydrogen gas
The balanced chemical equation for the reaction between zinc metal and hydrochloric acid is:
Zn + 2 HCl → ZnCl2 + H2
From this equation, we can see that 1 mole of zinc reacts with 2 moles of hydrochloric acid to produce 1 mole of hydrogen gas. The molar mass of zinc is 65.38 g/mol, which means that 1 mole of zinc has a mass of 65.38 g. Therefore, 20 mg (0.02 g) of zinc is equivalent to:
0.02 g / 65.38 g/mol = 3.06 x 10^-4 moles of zinc
According to the stoichiometry of the reaction, 1 mole of zinc reacts with 1/2 mole of hydrogen gas. Therefore, the amount of hydrogen gas produced from 3.06 x 10^-4 moles of zinc is:
1/2 x 3.06 x 10^-4 moles = 1.53 x 10^-4 moles of hydrogen gas
So the stoichiometric ratio between the 20 mg band reactant and the product hydrogen gas is 1:1/2, or simply 2:1. This means that 2 atoms of hydrogen are produced for every 1 atom of zinc consumed in the reaction.
Learn more about Stoichiometric Coefficient from given link
https://brainly.com/question/6666875
#SPJ4
What makes OH a good leaving group?
The presence of a lone pair on the oxygen atom makes OH a good leaving group.
A good leaving group is a molecular fragment that can depart from the substrate without undergoing rearrangement or reacting further. In general, the ability of a group to act as a leaving group depends on its stability after leaving. The stability of a leaving group is often enhanced by the inductive and resonance effects of nearby functional groups.
In the case of OH, its lone pair can act as a nucleophile and participate in reactions, but it can also be delocalized via resonance with the adjacent atoms. However, upon protonation, the O-H bond becomes polarized and the oxygen atom becomes a better leaving group.
To know more about the OH, here
https://brainly.com/question/2911201
#SPJ4
Describe the structure and bonding in silicon dioxide and explain why it is a suitable material for making welding blankets.
The molecular geometry of silicon dioxide is linear and bonding in it is covalent due to which it is a suitable material for making welding blankets.
What is molecular geometry?Molecular geometry is defined as a three -dimensional arrangement of atoms which make up the molecule.It includes parameters such as bond length,bond angle and torsional angles.
It influences many properties of molecule such as reactivity,polarity color,magnetism .The molecular geometry can be determined by various spectroscopic methods and diffraction methods , some of which are infrared,microwave and Raman spectroscopy.
Learn more about molecular geometry,here:
https://brainly.com/question/28557524
#SPJ9
osmosis describes the movement of which type of molecules across a membrane?
Answer:
water molecules
Explanation:
Osmosis is the movement of water molecules from a solution of higher concentration to a solution of lower concentration.
Hope it helps..
A sample of octane burns releasing 2290 J of heat to the surroundings, and the gases produced expands against a piston to do 560 joules of work. Calculate the internal energy change for this reaction.1- –2850 J2- –1730 J3- –2290 J4- +1730 J5- +2850 J
The internal energy change for this reaction is +1730 J.
What is internal energy?
Internal energy is the total energy contained within a system, including the kinetic and potential energies of its particles (atoms, molecules, ions, etc.). It is a state function that depends only on the current state of the system, including its temperature, pressure, volume, and composition.
The internal energy change (ΔU) for this reaction can be calculated using the first law of thermodynamics:
ΔU = Q - W
where Q is the heat released to the surroundings, and W is the work done by the gases.
Substituting the given values, we get:
ΔU = 2290 J - 560 J
ΔU = 1730 J
Therefore, the internal energy change for this reaction is +1730 J.
To learn more about internal energy:
https://brainly.com/question/17136958
#SPJ4
QuestionRank the aromatics shown in order of decreasing reactivity toward electrophilic substitution (more reactive > least reactive)A1>3>4>2B4>3>1>2C2>3>1>4D4>1>3>2Hard
The correct answer is:
A) 1 > 3 > 4 > 2
(Aromatic 1 is the most reactive towards electrophilic substitution, while aromatic 2 is the least reactive.)
The relative reactivity of aromatic compounds towards electrophilic substitution is determined by their ability to stabilize the positive charge that is formed during the reaction. This stability is influenced by several factors, including the number and position of electron-donating or electron-withdrawing substituents on the ring, as well as the overall aromaticity of the ring.
Aromatic 1 has an electron-donating -NH2 group, which increases the electron density on the ring and makes it more reactive towards electrophiles. Aromatic 3 has an electron-withdrawing -NO2 group, which decreases the electron density on the ring and makes it less reactive towards electrophiles than Aromatic 1, but still more reactive than Aromatics 2 and 4. Aromatic 4 has an electron-withdrawing -COOH group, which also decreases the electron density on the ring and makes it less reactive towards electrophiles than Aromatics 1 and 3. Aromatic 2 has no substituents and is the least reactive of the four.
for more questions on electrophilic substitution-
https://brainly.com/question/14803468
#SPJ4