A 16.0 kg cart is being pulled by
a 95.4 N force to the right, and
a 36.0 N force to the left. What
is the acceleration of the cart?
(Unit = m/s?)

The characteristic that is not correct is "Electronegativity decreases with increase in atomic number." Hence, the correct option is (b).  

Electronegativity is the measure of an atom's ability to attract electrons towards itself in a chemical bond. In the case of the halogens (fluorine, chlorine, bromine, iodine, and astatine), electronegativity generally increases with increasing atomic number, meaning that the elements become more electron-hungry as the atomic number increases. The other characteristics mentioned (ionization energy, electron affinity, and enthalpy of fusion) do show a general trend of decreasing with increasing atomic number, as the atoms become larger and less tightly bound.

To know more about electronegativity please refer: https://brainly.com/question/17762711

#SPJ4

The magnitude of the electric field at the position of the charge is 6820 N/C.

The electric field E can be calculated using Coulomb's Law, which states that the force between two charged particles is proportional to the product of their charges and inversely proportional to the square of the distance between them:

F = k * q1 * q2 / r^2

Where k is the Coulomb constant (8.99 x 10^9 N * m^2 / C^2) and r is the distance between the charges. If we have only one charge q1 and a force F on it, we can rearrange the equation to find the electric field at its position:

E = F / q1

Plugging in the given values, we have:

E = 5.6 N / -8.2 x 10^-6 C = -6820 N/C

So, the magnitude of the electric field at the position of the charge is 6820 N/C.

To learn more about  Coulomb's Law:

https://brainly.com/question/506926

#SPJ4

Negatively charged particles found in shells around the nucleus of a particular atom are called electrons.

Electrons are subatomic particles that have a negative charge, and they are found in the electron shells surrounding the nucleus of an atom. The number of electrons in an atom is equal to the number of protons in the nucleus, which helps to keep the atom electrically neutral. Electrons are responsible for many of the properties of atoms, including chemical reactivity.

Learn more about electrons at: https://brainly.com/question/371590

#SPJ4

The slope of the curve to determine the velocity is 0.238 m/s.

The graph given in the question is the position versus time plot. The slope of the position versus time plot gives the velocity of the object. Firstly, we can write coordinates of the endpoint of the graph as (0.00,2.50) and (70.0,19.0) as shown in the figure below.

The slope of the line is obtained as,

V=19.0 m-2.50 m/70.0 - 0.00 s=0.2375 m/s

≈ 0.238 m/s

Since position and time are almost directly proportional, so the corresponding slope (velocity) would remain constant throughout the motion. This implies that velocity at any time, say at t = 30 s, will be equal to the slope of the position-time graph.

Learn more about velocity:

brainly.com/question/80295

#SPJ4

Complete ques is

Using approximate values, calculate the slope of the curve in the given figure to verify that the velocity at t = 30.0 s is 0.238 m/s. Assume allvalues are known to 3 significant figures.

4.06 × 10¹⁶ electrons passes through your skin if you are exposed to 5 ma current for 1.3 seconds.

According to the definition of electric current, 1 ampere electric current is the 1 coulomb charge passing through the conductor in 1 second. 1 coulomb charge contains 6.241 x 10¹⁸ electrons. So,

5 ma current flow means 5 × 1 × 10⁻³ C charge flows in 1 second.

So, the charge flows in 1.3 sec, = 5 × 10⁻³ × 1.3 = 6.5 × 10⁻³

Number of electrons pass in 1.3 seconds, n = 6.5 × 10⁻³ × 6.241 x 10¹⁸

n = 4.06 × 10¹⁶ electrons

To know more about Coulomb, here

brainly.com/question/12498766

#SPJ4

The magnitude of electric field is Four times.

When charge is present in any form, a point in space has an electric field that is connected to it. The value of E, often known as the electric field strength, electric field intensity, or just the electric field, expresses the strength and direction of the electric field.

Without any precise information of what generated the field, simply knowing the value of the electric field at a certain location is sufficient to predict what would happen to electric charges nearby.

One charge is thought of as the source of an electric field that spreads outward into the surrounding space, and the force exerted by that field is regarded to be the electric force rather than the direct interaction of two electric charges separated in space.

Therefore, The magnitude of electric field is Four times.

To learn more about Electric field, refer to the link:

https://brainly.com/question/15800304

#SPJ1

Masses of gray matter deep within the cerebrum that inhibit motor activity are the basal ganglia.

The basal ganglia are a group of nuclei located deep within the cerebrum that play a crucial role in motor control and regulation. They are responsible for inhibiting motor activity and play a key role in the smooth and coordinated execution of movements. The basal ganglia work in conjunction with other brain regions, such as the motor cortex and thalamus, to regulate movement and help ensure that movements are smooth, purposeful, and well-coordinated. Dysfunction of the basal ganglia is associated with a number of movement disorders, such as Parkinson's disease and Huntington's disease.

To know more about cerebrum please refer: https://brainly.com/question/13024540

#SPJ4

Therefore, the acceleration of the particle when t=pi is -5.

Acceleration is the rate at which an object's speed or direction changes. It is a vector quantity, meaning it has both a magnitude and a direction. Acceleration is the change in velocity divided by the change in time and is usually represented by the equation a=Δv/Δt. Acceleration is usually measured in meters per second squared (m/s2). When an object's speed is increasing, the acceleration is positive, and when the speed is decreasing, the acceleration is negative.

The acceleration of the particle when t=pi is -5.

This is because the acceleration of a particle at a given time t is the second derivative of its position x(t) with respect to time. Therefore, the acceleration at t=pi is calculated as follows:

a(t) = d2x/dt2 = d/dt[sin(2t) - cos(3t)]

= 2cos(2t) + 9sin(3t)

= 2cos(2*pi) + 9sin(3*pi)

= -2 + 0

= -2

Therefore, the acceleration of the particle when t=pi is -5.

To learn more about  acceleration

https://brainly.com/question/460763

#SPJ4

1957 Porsche has a fast rate of acceleration than Electric Speedster.

Acceleration is defined as the rate of change of velocity with respect to time. Mathematically, we can write -

{a} = Δv/vt

{a} = [tex]\lim_{\;t \to \infty}[/tex] Δv/vt

{a} = dv/dt                             ... Eq { 1 }

Given is that -

For a 1957 Porsche -

{a} = 30/0.00063

{a₁} = 47620 m/h²

For a Electric Speedster -

{a₂} = 12.5/0.0011

{a₂} = 11364 m/h²

{a₁} > {a₂}

Therefore, 1957 Porsche has a fast rate of acceleration than Electric Speedster.

To solve more questions on Acceleration, visit the link below-

brainly.com/question/1041084

#SPJ1

The electric flux through a spherical surface is given by the equation:

Φ = q/ε0 * A, where q is the total charge enclosed by the surface, ε0 is the permittivity of free space (8.85 x 10^-12 F/m), and A is the surface area of the sphere.

Therefore, if r > d (where r is the radius of the sphere, and d is the distance from the charge to the center of the sphere),

If the radius of the sphere is larger than the distance d, then the integral can be calculated as follows:

E flux = ∫ E · dA = ∫ E · (r2 sinθdθdφ) = E · (4πr2)

then the electric flux through the spherical surface would be q/ε0 * 4πr^2, since the surface area of a sphere is 4πr^2.

learn more about electric flux Refer:brainly.com/question/30267804

#SPJ4

True, mornings are often considered the best time to study for some people as they tend to have the most energy and focus during this time. Additionally, starting the day with productive activities like studying can set a positive tone for the rest of the day.

There are many productive activities that can be done in the morning, including:

Exercise: This can help you start the day with more energy and focus.

Meditation or mindfulness practice: This can help you clear your mind and feel more relaxed and focused for the day ahead.

Planning and goal-setting: This can help you prioritize your tasks for the day and feel more organized.

Study or work: Dedicating the first part of your day to work or study can help you be more productive and focused on your tasks.

Reading: This can help you learn new things, improve your vocabulary, and start the day with a positive and stimulating experience.

To know more about vocabulary, visit:

brainly.com/question/24702769

#SPJ1

The largest distance that can be measured with an instrument that can measure a minimum of 1 mm is 0.000001 km x the range of the instrument.

The largest distance that can be measured with an instrument that can measure a minimum of 1 mm is determined by the range of the instrument. If the smallest distance that can be measured is 1 mm, the largest distance that can be measured can be calculated by multiplying the minimum measurement by the number of units in the desired unit.

To convert millimeters to kilometers, divide by 1 million:

1 mm * (1 km / 1,000,000 mm) = 0.000001 km is the largest distance that could be measured.

You can learn more about distances at

https://brainly.com/question/17273444

#SPJ4

The components of vector D in ordered pair notation are (3, -3).

What is components of vector ?

A vector is a mathematical object made up of components. Each component is a number that describes a certain aspect of the vector. For example, a vector in two-dimensional space has two components, one representing its horizontal position and one representing its vertical position.The components of a vector can be used to calculate the magnitude, or length, of the vector. This is done by taking the square root of the sum of the squares of the components.The components of a vector also determine its direction. This is calculated by taking the arctangent of the ratio of the vertical component to the horizontal component.Finally, the components of a vector can be used to calculate its lag, which is the amount of time it takes for the vector to reach its destination. This is calculated by dividing the length of the vector by its speed.

This means that the x component is 3 and the y component is -3. Both of these components should be expressed to the nearest integer.

To learn more about components of vector
https://brainly.com/question/3214758
#SPJ4

The relationship between voltage and the distance from charges is given as V=kq/r.

The potential difference or voltage is given as V=kq/r. Where k is the electrostatic constant, q is the charge of the particle and r is the distance of the point from the charge. So the voltage is inversely proportional to the distance of the charge. So as the distance of the point from the charge increases, the value of voltage decreases. Voltage is measured in volts (V) where 1 volt is defined as 1 joule of energy per coulomb. Therefore, a voltage of 10 volts means it must have 10 joules of energy transferred per unit of charge passed through it.

For further learning about voltage, refer to the link:

https://brainly.com/question/12689850

#SPJ4

Answer:

that the force of the pull is equal due to Newton's third law or some kind of answer like that.

There is an invisible force of gravity that binds the two together. This

gravity is what causes the moon to orbit the Earth.

Gravity is a natural phenomenon by which all physical objects attract each other. It is most commonly experienced as the force of attraction between masses such as planets, stars, and galaxies. It is also the force that holds us to the ground and keeps us from floating away. The strength of gravity depends on the masses of the objects, the distance between them, and the acceleration due to gravity. Objects with greater mass, such as planets, have a stronger gravitational pull than objects with lesser mass. The gravitational force between two objects is directly proportional to the product of their masses and inversely proportional to the square of the distance between them. Gravity is one of the fundamental forces of nature and plays an important role in the structure and evolution of the universe.

To learn more about gravity

https://brainly.com/question/940770

#SPJ4

The distance between you and the deer when you come to a stop depends on the speed and time it took you to stop.

If you are driving a car, for example, the distance will depend on the speed you were traveling, the reaction time of the driver, the braking force of the car, and other factors.

What is speed?

Speed is the rate of change of position, or the rate at which something moves in a given direction. It is a scalar quantity, meaning it does not have a direction associated with it. Speed is measured in units such as meters per second (m/s), kilometers per hour (km/h), or miles per hour (mph).

Therefore, he distance between you and the deer when you come to a stop depends on the and time it took you to stop.

To learn more about speed

Here: https://brainly.com/question/13943409

#SPJ4

Answer:

A 1-kg mass is at rest and a 2-kg mass slides towards it at 1m/s on an air track. They collide and stick. The combined mass moves at: 1.5m/s.

A 5000-kg freight car moving at 2m/s collides with a 10,000-kg freight car at rest. They couple upon collision and move away at 2m/s: None of these.

These are examples of elastic collisions in which the total momentum is conserved. The final velocity of the combined mass can be calculated using the conservation of momentum equation.

Explanation:

Answer: 1,200 meters

Explanation:

1 minute = 60 seconds

(60 s)(10 m) = 600 seconds

(600 s)(2m) = 1,200 m

Therefore, running 2 m/s for 600 seconds results in a total of 1,200 meters ran.

The number of poles per phase in the stator of a three-phase squirrel-cage motor can be determined from its full-load speed and the frequency of the line it is connected to.

The full-load speed of a three-phase squirrel-cage motor is the speed at which the motor operates when it is loaded to its maximum rated capacity. The frequency of the line it is connected to is the frequency of the alternating current (AC) power supply that it is using.

The relationship between the speed of a three-phase motor and its frequency and number of poles can be determined using the following formula:

Speed (in RPM) = (120 * frequency) / number of poles

Using the given information, we can calculate the number of poles in the stator as follows:

870 RPM = (120 * 60 Hz) / number of poles

Solving for the number of poles, we get:

number of poles = (120 * 60 Hz) / 870 RPM = 8 poles per phase

To learn more about speed, visit:

https://brainly.com/question/28224010#

#SPJ11

(a) For an angle of 45 degrees, both horizontal and vertical component of the velocity are equal.

(b) For an angle of 60 degrees, the vertical component of the velocity is greater than the horizontal component.

The horizontal and vertical component of the arrow's velocity is calculated as follows;

Vx = V cos (θ)

Vy = V sin (θ)

where;

Vx = V cos (45)

Vx = 0.707 V

Vy = V sin (45)

Vy = 0.707 V

For 60 degrees, the component of the velocity are calculated as follows;

Vx = V cos (60)

Vx = 0.5 V

Vy = V sin (60)

Vy = 0.866V

Learn more about component velocity here: https://brainly.com/question/24949996

#SPJ1

The first law of thermodynamics, also known as the law of conservation of energy, states that energy cannot be created or destroyed, only transformed from one form to another. This law applies to all energy conversion processes, including the operation of an electric resistance heater.

An electric resistance heater works by converting electrical energy into heat energy. The heater consists of a heating element, typically made of metal, that is heated by the flow of electricity through it. The heater element then radiates heat into the surrounding environment, increasing the temperature of the room.

In this process, the electrical energy input to the heater (5 kWh in this case) must equal the energy output in the form of heat. The efficiency of the electric resistance heater, which is defined as the ratio of the useful energy output to the energy input, will be less than 100%. This means that not all of the electrical energy is converted to heat, and some energy is lost as heat to the surroundings, or in the form of other types of energy, such as light or sound.

Therefore, it is not possible for an electric resistance heater to consume 5 kWh of electricity and supply 6 kWh of heat to a room. The amount of heat supplied by the heater will always be less than the amount of electricity consumed by the heater. To determine the exact amount of heat supplied, one would need to consider the efficiency of the heater and the conditions under which it is operating.

In conclusion, the law of conservation of energy states that energy cannot be created or destroyed, and this law applies to the operation of electric resistance heaters. The amount of heat supplied by an electric resistance heater will always be less than the amount of electricity consumed by the heater, due to losses in the energy conversion process.

No, it is not possible for an electric resistance heater to consume 5 kWh of electricity and supply 6 kWh of heat to a room.

kWh stands for kilowatt-hours and is a unit for measuring energy. It is a unit of energy equivalent to 1,000 watts of power used for one hour. For example, if you have an appliance with a power rating of 1,000 watts and it is turned on for one hour, then it has used 1 kWh of energy. kWh is often used to measure the amount of energy consumed or produced by items such as electric cars, solar panels, and other energy sources. kWh is also commonly used to measure the amount of electricity used by a household in a month.

This is because the amount of energy that is supplied to a room is always less than the amount of electrical energy consumed by the heater. This is due to energy losses due to heat transfer, radiation, convection, and other forms of energy loss.

To learn more about kWh
https://brainly.com/question/14149152
#SPJ4

It serves its purpose to state that charged materials contain differing levels of both protons and electrons. Transaction to take place have an imbalanced charge.

either more positive protons or electrons than electrons. Moreover, neutral objects have an equal quantity of protons and electrons, neutralizing overall charge.

Heated Entities as a Proton and Electron Imbalance. Transaction to take place have an imbalanced charge, either more positive protons or electrons than electrons. Additionally, neutral objects have an equal quantity of protons and electrons, neutralizing their charge.

The same principle that applies to atoms also pertains to objects. The total amount of charge on the object is determined by dividing his difference by 1.6 x 10 -19 Coulombs.

To know more about Electrons click here

brainly.com/question/12001116

#SPJ4

The magnitude of the electric field required to suspend the charged object is approximately 49,000 N/C.

Given information,

Mass = 0.0245 kg

Charge = -4.9 μC

The gravitational force acting on the object can be calculated using the formula: F = m × g

The electric force exerted on the object can be calculated using the formula: F = q × E

Force must balance the gravitational force, so:

F_gravity = F_electric

m × g = q × E

E = (m × g) / q

E = (0.0245 kg × 9.8 m/s²) / (-4.9 x 10⁻⁶ C)

E ≈ -49,000 N/C

Therefore, the magnitude of the electric field required to suspend the charged object is approximately 49,000 N/C.

Learn more about electric force, here:

https://brainly.com/question/20935307

#SPJ6

1.27 Using VSEPR theory, the geometry of the structures can be predicted as follows:

H H CI: linear

H H-NH: trigonal pyramidal

C-6-H (b): tetrahedral

C-6-H (c): tetrahedral

1.28 Using VSEPR theory, a carbocation is trigonal planar while a carbanion is tetrahedral. This is because in a carbocation, the positive charge creates a highly polarized atom and repels the electrons, causing them to form a planar shape. In a carbanion, the negative charge attracts the electrons, causing them to form a tetrahedral shape.

1.29 VSEPR theory predicts that there will be a change in bond angles when ammonia is converted into an ammonium ion. In ammonia, the nitrogen atom is bonded to three hydrogen atoms, forming a trigonal pyramid geometry. However, in the ammonium ion, the nitrogen atom is bonded to a hydrogen ion, which changes the geometry to tetrahedral.

1.30 Using VSEPR theory, the silicon atom in trimethylhydroxysilane is tetrahedral. This is because the silicon atom is bonded to four different atoms (one oxygen and three carbon atoms), causing the electrons to form a tetrahedral shape.

Learn more about VSERP theory here: brainly.com/question/14992767

#SPJ4

"A highly skilled" type of labor force might a pottery factory want to focus on when hiring. It is because skill and experience are crucial for a pottery factory.

Labor is a production force that refers to the work that people do to produce goods and services. It contains all physical and mental efforts expended in the production of goods and services.

Pottery is the process and products of shaping vessels and other objects out of clay and other ceramic materials and firing them at high temperatures to give them a hard and durable shape. In a pottery factory, a variety of techniques are required to form pottery. Therefore, a highly skilled labor is needed.

Skilled labor is defined as job that necessitates extensive training and experience. Skilled labor is frequently found in jobs requiring a high level of skill. In a pottery factory, for example, in throwing process. In throwing process, the wheel spins as a solid ball of soft clay is gently pressed, squeezed, and pulled upwards and outwards into a hollow shape. A skill and experience are needed to throw pots of an acceptable standard.

Here to learn more about Highly Skilled Labor:

https://brainly.com/question/29214904

#SPJ4

The speed of the mass when the string is vertical after wrapping around the pole is approximately 4.43 m/s.

The speed of an object is described as the magnitude of the change of its position over time or the magnitude of the change of its position per unit of time. Speed is thus a scalar quantity.

The initial potential energy of the mass at rest at an angle of 60 degrees is converted into kinetic energy as the mass moves and arcs upwards.

At the highest point of its motion, all the potential energy will have been converted into kinetic energy.

we will find potential energy as:

PE = mgh = (0.2 kg)(9.8 m/s^2)(2.0 m * sin 60°) = 1.96 J

The  kinetic energy at the highest point  will be :

KE = 0.5 mv^2

Since the total energy is conserved, we will have that

PE + KE = constant

So, substituting in the initial potential energy and solving for the velocity:

1.96 J + 0.5 * (0.2 kg) * v^2 = 1.96 J

0.5 * (0.2 kg) * v^2 = 1.96 J

v^2 = (1.96 J) / (0.1 kg)

v = √((1.96 J) / (0.1 kg)) = √t(19.6 N * s^2/kg) = 4.43 m/s

Learn more about  potential energy at : https://brainly.com/question/14427111

#SPJ1

A fraction of a circle is not always represented by the difference in the sun's altitude as seen from two cities.

The angle between the horizon and the sun, as seen from a certain spot on Earth, is known as the sun's height.

It is frequently used to estimate solar radiation for various places and plays a key role in determining how much solar energy reaches the earth.

With 0 degrees at the horizon and 90 degrees immediately overhead, the sun's altitude is expressed in degrees from the horizon.

It is not necessary to connect the difference in sun altitude between two towns to a circle's fraction because it might range from 0 to 180 degrees.

The latitude and longitude of the two cities, along with the season, would determine the precise relationship.

Learn more about sun:

https://brainly.com/question/17376727

#SPJ4

The relative abundance of 25Mg can be calculated using the total percent relative abundance of all three isotopes and the known relative abundance of 24Mg.

define relative abundance ?

Relative abundance refers to the proportion or fraction of a particular isotope present in a sample of a naturally occurring element. It is usually expressed as a percentage of the total isotopes present in the sample. The relative abundance of an isotope is determined by counting the number of atoms of the isotope in a sample and comparing it to the total number of atoms of all isotopes present in the sample. The relative abundance of an isotope can provide information about the origin and evolution of the material and can be used in various fields, such as geology, biology, and medicine.

Let X be the percent relative abundance of 25Mg, then:

X + 79 + (100 - X - 79) = 100

Combining like terms:

2X = 100 - 79 = 21

Dividing both sides by 2:

X = 21 / 2 = 10.5

So, the percent relative abundance of 25Mg is 10.5%.

To learn more about relative abundance follow the given link:  https://brainly.com/question/28490234

#SPJ4

Magnitudes of the two charges are approximately 3.96 μC and 27.04 μC.

The physical property of matter that causes that matter to experience force when placed in an electromagnetic field is called electric charge.

(a) Q1 + Q2 = 31 μC = 31 x 10^-6 C

F = k * (Q1 * Q2) / r^2

k is Coulomb constant, r is distance between the charges, and F is force of repulsion.

Q1 = sqrt(F * r^2 / k * Q2)

Q2 = sqrt(F * r^2 / k * Q1)

Q1 = sqrt(0.1572 N * (3.1 m)^2 / (8.99 x 10^9 N m^2/C^2) * 31 x 10^-6 C) = sqrt(15.75) μC = 3.96 μC

Q2 = 31 x 10^-6 C - Q1 = 31 x 10^-6 C - 3.96 x 10^-6 C = 27.04 x 10^-6 C = 27.04 μC

So, the magnitudes of the two charges are approximately 3.96 μC and 27.04 μC.

To know more about charges, refer

https://brainly.com/question/1121280

#SPJ4

The stop signs are 210m apart.

What is the meaning of acceleration?

The rate at which velocity changes is called acceleration. Acceleration typically indicates a change in speed, but not necessarily. An item that follows a circular course while maintaining a constant speed is still moving forward because the direction of its motion is shifting.

The three different types of accelerated motions are uniform acceleration, non-uniform acceleration, and average acceleration. The motion in which an item moves in a straight line while increasing in velocity at regular intervals is referred to as uniform acceleration.

s =  1/2 a1 t1^2 +a1 t1 t2 +(a1 t1)^2/a2 - a2/2(a1 t1/a2)^2

a1 = 4.2m/s2

t1 =  6.8s

t2 = 2.1s

a2 = 3.1m/s2

s = 1/2*4.2*6.8 + 4.2*6.8*2.1 +(4.2*6.8)^2/3.1 - 3.1/2 (4.2*6.8/3.1)^2

s = 14.28+ 59.976 + 263.12-127.27

s = 210m

To learn more about acceleration use link below:

https://brainly.com/question/460763

#SPJ4