Answer:
The entropy change of carbon dioxide = 0.719 kJ/k
Explanation:
Given:
1.5 m - 3 insulated rigid tank contains 2.7 kg of carbon dioxide at 100 kPa
The objective is to determine the entropy change of carbon dioxide
Formula used:
ΔS=
Solution:
On considering,
[tex]C_{P} =0.846 kJ/kg K\\C_V=0.657 kJ/kg k\\[/tex]
ΔS=[tex]mc_{v} lu\frac{p_{2} }{P_{1} }[/tex]
On substituting the values,
ΔS=[tex]2.7*0.657lu\frac{150}{100}[/tex]
ΔS=0.719 kJ/k
The entropy change is "0.719 kJ/K".
Given values are:
Mass of tank,
m = 2.7 kgPressure,
P₁ = 100 kPaRised pressure,
P₂ = 150 kPaAssumption of constant specific heat is,
[tex]C_v = 0.657 \ kJ/kgK[/tex]As we know the formula,
→ [tex]\Delta S = mC_v \ ln(\frac{P_2}{P_1} )[/tex]
[tex]= (2.7)(0.657) \ ln (\frac{150}{100} )[/tex]
[tex]= 1.7739\times 0.4055[/tex]
[tex]= 0.7193 \ kJ/K[/tex]
Thus above answer is right.
Learn more:
https://brainly.com/question/20340354
A gas mixture is made by combining 8.7 g each of Ar, Ne, and an unknown diatomic gas. At STP, the mixture occupies a volume of 17.28 L. What is the molar mass of the unknown gas
Answer: Molar mass of the unknown gas is 73.153 g/mol.
Explanation:
Given: Mass of each gas = 8.7 g
Volume = 17.28 L
Let us assume that the molar mass of gas is m g/mol.
Molar mass of Ar is 40 g/mol and Ne is 20 g/mol.
Hence, total moles of each gas are as follows.
[tex](\frac{8.7}{40} + \frac{8.7}{20} + \frac{8.7}{m}) mol[/tex]
At STP, the total volume of these gases is as follows.
[tex](\frac{8.7}{40} + \frac{8.7}{20} + \frac{8.7}{m}) mol \times 22.4 L = 17.28 L\\(\frac{8.7}{40} + \frac{8.7}{20})22.4 L + \frac{8.7}{m} \times 22.4 L = 17.28 L\\14.616 + \frac{8.7}{m} \times 22.4 L = 17.28 L\\\frac{8.7}{m} \times 22.4 L = (17.28 L - 14.616)\\\frac{8.7}{m} \times 22.4 L = 2.664 \\m = 73.153 g/mol[/tex]
Thus, we can conclude that molar mass of the unknown gas is 73.153 g/mol.
The molar mass of a compound can be determined by the freezing point depression method. The solution must be relatively dilute and you must know the molal freezing point depression constant of the solvent, Kf. Which statement regarding Kf is true?
A. Kf should be small so that the solvent will not sublimate.
B. Kf will change depending on what solute is dissolved in the solvent.
C. Kf should be negative so the freezing point of the solution will decrease.
D. Kf should be large so the temperature change will be large enough to measure.
Answer:
K should be large so the temperature change will be large enough to measure.
Explanation:
Let us recall that;
∆T = k m I
Where;
∆T= change in boiling point
K= freezing point constant
m= molality
i= Van't Hoff factor
Since the change in temperature depends on k, the larger the value of k the larger the temperature change(Ts - Tb). Hence; K should be large so the temperature change will be large enough to measure.
Ts= freezing temperature of pure solvent
Tb= freezing temperature of solution
If the volume of the gas is increased to 9.6 L , what will the pressure be?
When Michelle's blood was testedthe chloride level was 0.45 g/dL. . What is this value in milliequivalents per liter? b. According to Table 9.6, is this value abovebelow within the normal range ?
Answer:
?what
Explanation:
i am having a hard time reading this
b) What is the change in entropy of the reaction if ΔH° = -3.2 kJ mol-1?
What are the uses of Sulphuric acid?
Answer:
The major use of sulfuric acid is in the production of fertilizers, e.g., superphosphate of lime and ammonium sulfate. It is widely used in the manufacture of chemicals, e.g., in making hydrochloric acid, nitric acid, sulfate salts, synthetic detergents, dyes and pigments, explosives, and drugs.
The major use of sulfuric acid is in the production of fertilizers, e.g., superphosphate of lime and ammonium sulfate. It is widely used in the manufacture of chemicals, e.g., in making hydrochloric acid, nitric acid, sulfate salts, synthetic detergents, dyes and pigments, explosives, and drugs.
1. A 225-L barrel of white wine has an initial free SO2 concentration of 22 ppm and a pH of 3.70. How much SO2 (in grams) should be added to the barrel to result in the required SO2 level
Answer:
The appropriate answer is "9.225 g".
Explanation:
Given:
Required level,
= 63 ppm
Initial concentration,
= 22 ppm
Now,
The amount of free SO₂ will be:
= [tex]Required \ level -Initial \ concentration[/tex]
= [tex]63-22[/tex]
= [tex]41 \ ppm[/tex]
The amount of free SO₂ to be added will be:
= [tex]41\times 225[/tex]
= [tex]9225 \ mg[/tex]
∵ 1000 mg = 1 g
So,
= [tex]9225\times \frac{1}{1000}[/tex]
= [tex]9.225[/tex]
Thus,
"9.225 g" should be added.
Glass tubes of the following diameters are arranged in a water trough. Rank the following glass tubes in decreasing order of their capillary rise.
Rank from highest to lowest capillary rise. To rank items as equivalent, overlap them.
1.25 mm, 1 mm, 0.75 mm, 0.25 mm, 0.50 mm
Answer:
0.25 mm> 0.50 mm > 0.75 mm> 1mm> 1.25 mm
Explanation:
Capillary movement involves the movement of liquid up through a capillary tube.
Looking at the question, we can see all the various diameters of the capillary tube are involved.
Note that, that the narrower the diameter of the capillary tube, the better the capillary action of the liquid (the liquid rises more now than then).
PLEASE HELP FAST!!
Which of the following ions is formed when an acid is dissolved in a solution?
H+
O−
OH−
SO42+
Answer:
H+
Explanation:
acid produce H+ when it is dissolved in a solution
When we react a weak acid with a strong base of equal amounts and concentration, the component of the reaction that will have the greatest effect on the pH of the solution is: Select the correct answer below:_________
a. the reactant acid
b. the reactant base
c. the conjugate acid of the strong base
d. the conjugate base of the weak acid
Answer:
d. the conjugate base of the weak acid
Explanation:
The strong base (BOH) is completely dissociated in water:
BOH → B⁺ + OH⁻
The resulting conjugate acid (OH⁻) is a weak acid, so it remains in solution as OH⁻ ions.
By other hand, the weak acid (HA) is only slightly dissociated in water:
HA ⇄ H⁺ + A⁻
The resulting conjugate base (A⁻) is a weak base. Thus, it reacts with H⁺ ions from water to form HA, increasing the concentration of OH⁻ ions in the solution.
Therefore, the resulting solution will have a pH > 7 (basic).
every sperm has ____(one/two) sex chromosomes
PLEASE TELL THE ANSWER!!
Two chromosomes
Explanation:
The chromosomes are XY
Please mark me brainliest
Answer:
Two
Explanation:
Every sperm cell has two chromosomes.One is X and other is Y .They are found in pairs either XY or XXthe question is in the attachment
Answer:
About redox reaction which of the given statements are true?
Explanation:
Redox reaction is the one in which both oxidation and reduction reactions take place simultaneously.
For example:
[tex]C(s)+O_2(g)->CO_2(g)[/tex]
In this reaction, carbon undergoes oxidation and oxygen undergoes reduction simultaneously.
During this reaction, mutual exchange of electrosn take place between the oxidant and the reductant.
Among the given options,
Option B. electrons are transferred
and
option C.They include both oxidation and reduction takes place are the correct answers.
Please help me ASAP I’ll mark Brainly
Answer:
cell
chloroplast and cell wall
nucleus
life processes
cell membrane
shape and size
vacuole
Hope it helps
Please help me, I don't bite. 3.
Answer:
jjjjjjjjj
Explanation:
hhhhhhhhhhh
In what kind of orbital do the lone-pair electrons on the nitrogen of dimethylacetamide reside, and is it in the same plane as the ch3 groups
Answer:
The lone pairs on nitrogen in dimethylacetamide reside in sp3 orbitals which are coplanar with the methyl groups
Explanation:
The compound dimethylacetamide consists of oxygen bearing two lone pairs of electrons and a nitrogen atom bearing a lone pair of electrons and has two methyl groups attached to the nitrogen atom.
The lone pair on the nitrogen atom is accommodated in an sp3 orbital of nitrogen as shown in the question. This sp3 orbital is coplanar with the two methyl groups.
Which statement is true about how scientists draw conclusions from data?
A. Scientists do not allow others to make conclusions about their data.
B. Teams of scientists never share their data to help other teams draw conclusions.
C. Any two scientists will always come to the same conclusion about a data set.
D. Two scientists may have different underlying assumptions that lead them to different conclusions about the same data.
Answer:
D. Two scientists may have different underlying assumptions that lead them to different conclusions about the same thing.
Explanation:
It's all about how a person analyzes data. Some do it mathmatically while others do it logically. By doing it different ways, you may still come to the same conclusion, despite working at the problem in a different way.
Essentially all of the mass of an atom is due to the?
nucleons
electrons.
protons
Neutrons
Answer:
nucleons
Explanation:
The answer to the question is nucleons. Because there are both protons and neutrons in the nucleon, it will be heavier. Also, protons and neutrons are much heavier than the weight of an electron, because electrons float around the atom so it is not the answer. So, our final answer is actually option A.
Acetic acid and water react to form hydronium cation and acetate anion, like this:
HCH3CO2(aq) + H2O → H3O+(l)(aq) + CH3CO2^-(aq)
Imagine 226 mmol of CH3CO2- are added to a flask containing a mixture of HCH3CO2, H2O, H3O + and CH3CO2- at equilibrium.
Required:
What is the rate of the reverse reaction before any CH3CO2^- has t:een added to the flask?
Answer:
The rate of the reverse reaction before any addition of CH3CO2- is zero
Explanation:
When the reaction is in equilibrium:
HCH3CO2(aq) + H2O ⇄ H3O+(l)(aq) + CH3CO2^-(aq)
The reaction quotient, Q = Ka and no more products or reactants are produced because their concentrations are in the right proportion.
Now, as no reaction occurs,
The rate of the reverse reaction before any addition of CH3CO2- is zeroMethyl orange can change color by transitioning from one chromophore to another. When added to a clear solution and the solution turns red, it is determined to be a(n) __________ in its __________ stable form.
Answer:
acidic titration in its stable form
Explanation:
Methyl orange can change its color in titration solution. The yellow color is towards alkaline solution and red color is towards acidic solution. The Ph value of solution will change during this chemical process.
The equilibrium constant (K p) for the interconversion of PCl 5 and PCl 3 is 0.0121:
PCl5 (g) → PCl3 (g) + Cl2 (g)
A vessel is charged with PCl 5 giving an initial pressure of 0.123 atm and yields PCl 3 and Cl 2. At equilibrium, the partial pressure of PCl 3 is ________ atm.
A) 0.0782.
B) 0.0455.
C) 0.0908.
D) 0.0330.
E) 0.123.
Answer: At equilibrium, the partial pressure of [tex]PCl_{3}[/tex] is 0.0330 atm.
Explanation:
The partial pressure of [tex]PCl_{3}[/tex] is equal to the partial pressure of [tex]Cl_{2}[/tex]. Hence, let us assume that x quantity of [tex]PCl_{5}[/tex] is decomposed and gives x quantity of [tex]PCl_{3}[/tex] and x quantity of [tex]Cl_{2}[/tex].
Therefore, at equilibrium the species along with their partial pressures are as follows.
[tex]PCl_{5}(g) \rightarrow PCl_{3}(g) + Cl_{2}(g)\\[/tex]
At equilibrium: 0.123-x x x
Now, expression for [tex]K_{p}[/tex] of this reaction is as follows.
[tex]K_{p} = \frac{[PCl_{3}][Cl_{2}]}{[PCl_{5}]}\\0.0121 = \frac{x \times x}{(0.123 - x)}\\x = 0.0330[/tex]
Thus, we can conclude that at equilibrium, the partial pressure of [tex]PCl_{3}[/tex] is 0.0330 atm.
Determine whether each phrase describes carboxylic acids or esters.
a. Usually have a sour odor _____________
b. Notable for their pleasant fragrances ___________
c. Do not form hydrogen bonds amongst themselves and have higher vapor pressure _____________
d. Their reactions with base are known as neutralizations ____________
e. Their reactions with base are known as saponifications _____________
Write the number of sig. fig. in four numbers given in the sentence below. An (one) octopus has 8 legs. 13 octopi have 104 legs.
Give four answers.
A. Infinity, Infinity, Infinity, Infinity
B. 1, 1, 2, 3
C. Infinity, Infinity, 2, 3
D. No answer text provided.
Answer:
1, 1, 2, 3
Explanation:
The numbers 1 and 8 both have 1 sig. fig.
The number 13 has 2 sig. figs.
The number 104 has 3 sig. figs.
A 2,31M solution of trans-4-methyl-2-pentene (C6H12, 85mL) is combined with 7,5mL of 3,55M elemental bromine to form an addition product. With an expectation of 100% yield, more than 25mmols of elemental bromine would be consumed during this chemical process.
a. True
b. False
Answer:
The statement is false
Explanation:
Number of moles of alkene = 2.31 × 85/1000 = 0.196 moles
Number of moles of Br2 = 3.55 × 7.5/1000 = 0.0266 moles
Given that the reaction is 1:1
1 mole of alkene reacts with 1 mole of bromine
0.196 moles of alkene should react with 0.196 moles of bromine
Hence, to achieve 100%yield, 0.196 moles of bromine and not 25mmols of elemental bromine
A dilute solution of an unknown ionic compound must be identified. Several experiments are run on solutions that contain the possible ions with the results tabulated below. Cation Addition of HCl Heated in hot water Ag+ White precipitate is formed No observable change Pb+2 White precipitate is formed Precipitate dissolves Zn+2 No observable change No observable change Anion Addition of Ca(NO3)2 Addition of HNO3 CO3–2 White precipitate is formed Precipitate dissolves and bubbles form PO4–3 White precipitate is formed Precipitate dissolves A white precipitate is formed when HCl is added to the unknown compound. When the white precipitate is heated in hot water, it does not dissolve. A white precipitate is formed when Ca(NO3)2 is added to the unknown compound. When HNO3 is added to the precipitate, it dissolves and bubbles are formed. What is the chemical formula of the unknown ionic compound?
Answer:
The chemical formula of the unknown ionic compound is Ag₂CO₃.
Explanation:
The method used to identify the ions present in a given solution of an unknown compound is known as qualitative analysis. Specific tests are carried based on the chemical reaction of these ions and the results they give in these reactions, the ions present innthe compound are identified. Some of the results or observations include formation of precipitates on addition of certain reagents, evolution of gases, colour changes, as well as the color changes that are observed in a flame test of a solutionmof these compounds.
In the given question, when testing for cations, a white precipitate is formed when HCl is added to the unknown compound. When the white precipitate is heated in hot water, it does not dissolve.
From the table of observations, both Ag+ and Pb²+ give a white precipitate on addition of HCl but Zn²+ does not. So the cation present is either Ag+ or Pb²+. However, when heated in hot water, the white precipitate does not dissolve as will be observed if Ag+ were the cation present. Thus, the cation is Ag+.
When testing for anions, a white precipitate is formed when Ca(NO3)2 is added to the unknown compound and when HNO3 is added to the precipitate, it dissolves and bubbles are formed.
Now comparing these results with that as observed with CO₃²- and PO₄³-, both form white precipitates on addition of Ca(NO₃)₂, and the precipitate dissolves on addition of HNO₃. However, only CO₃²- dissolves with the production of bubbles when HNO₃ is added. Thus, the anion is CO₃²-.
Therefore, the compound is Ag₂CO₃ which is formed from the cation Ag+ and CO₃²-.
determine the number of atoms of H in 35.0 grams of C2H4O2
Answer:
1.40x10^24 atoms of H
Explanation:
Calculate the Experimental Molar Volume in L/mol of the Hydrogen gas, H2, if the volume of H2 at STP is 52.8 mL and the mass of Magnesium metal, Mg, used in the experiment is 0.055 g.
Answer:
The Experimental Molar Volume in L/mol of the Hydrogen gas=23.36L/mol
Explanation:
We are given that
Volume of H2 at STP=52.8mL
Mass of magnesium metal ,M(Mg)=0.055g
We have to find the Experimental Molar Volume in L/mol of the Hydrogen gas.
Molar mass of Mg=24.305 g/mol
Number of moles=[tex]\frac{given\;mass}{molar\;mass}[/tex]
Using the formula
Number of moles of Mg=[tex]\frac{0.055}{24.305}[/tex]moles
Number of moles of Mg=0.00226moles
Number of moles of Mg=Number of moles of H2
Number of moles of H2=0.00226moles
Molar volume of Hydrogen gas (H2)=[tex]\frac{volume\;at\;STP}{No\;of\;moles\;H_2}[/tex]
Molar volume of Hydrogen gas (H2)=[tex]\frac{52.8}{0.00226}mL/mol[/tex]
Molar volume of Hydrogen gas (H2)=[tex]\frac{52.8}{0.00226}\times 10^{-3}L/mol[/tex]
[tex]1L=1000mL[/tex]
Molar volume of Hydrogen gas (H2)=23.36L/mol
Hence, the Experimental Molar Volume in L/mol of the Hydrogen gas=23.36L/mol
Name the following aldehyde PLEASE PLEASE HELP
Answer:
Explanation:
Answer is D 2,5-dimethylheptanal
You should accern the lowest possible number close to the parent name
20. What intermolecular forces would affect the interactions of water molecules? Explain why.
Answer:
Water has strong hydrogen bond dipole-dipole intermolecular forces that give water a high surface tension and a high heat of vaporization and that make it a strong solvent
she goes away change to negative form
She goes away.
Negative
She doesn't go away.
I need help with the practice question at the bottom. Thank you.
Explanation:
For this question, we apply the equation: Q = mCp AT Where m is the mass of the substance, Cp
is its specific heat capacity and AT is the
temperature change. Q = 896 x 0.45 x (5-94)
Q = -35884.8 Joules
So about -36 kilojoules of heat is released.
mark as brainliest