A 120.00 kg roller-coaster car is pressed against a spring of constant 925 N/m and compresses it 3.00 meters. It is then released and rolls up an inclined portion of the track. How high up the incline will car roll before coming to a stop?
answer with correct units​

Answers

Answer 1

Answer:

Explanation:

The potential energy stored in the compressed spring is given by:

PE = (1/2) k x^2

where:

k = spring constant = 925 N/m

x = compression of the spring = 3.00 m

Substituting the values, we get:

PE = (1/2) (925 N/m) (3.00 m)^2 = 4162.5 J

At the bottom of the incline, the roller-coaster car has both potential energy (PE) and kinetic energy (KE). At the top of the incline, the roller-coaster car will have only potential energy, because it has come to a stop. We can therefore set the PE at the bottom equal to the PE at the top:

PE_bottom = PE_top

where:

PE_bottom = m g h, where m is the mass of the roller-coaster car, g is the acceleration due to gravity (9.81 m/s^2), and h is the height of the incline

PE_top = 4162.5 J, the potential energy stored in the compressed spring

Substituting the values, we get:

m g h = 4162.5 J

Solving for h, we get:

h = 4162.5 J / (m g) = 4162.5 J / (120.00 kg x 9.81 m/s^2) ≈ 3.54 m

Therefore, the roller-coaster car will roll up the incline to a height of approximately 3.54 meters before coming to a stop.

Answer 2

The roller-coaster car will roll up approximately 7.08 meters up the incline before coming to a stop.

To calculate how high up the incline the roller-coaster car will roll before coming to a stop, we can use the principle of conservation of mechanical energy. At the initial position, the roller-coaster car has potential energy stored in the compressed spring, and at the highest point on the incline, it will have only potential energy due to its height.

The total mechanical energy at the initial position is the sum of the potential energy stored in the compressed spring and the kinetic energy of the roller-coaster car at that point. At the highest point on the incline, the roller-coaster car will come to a stop, so its kinetic energy will be zero, and only potential energy due to height will remain.

The equation for conservation of mechanical energy is:

Initial Mechanical Energy = Final Mechanical Energy

The initial mechanical energy is the potential energy stored in the compressed spring:

Initial Mechanical Energy = (1/2) * k * [tex]x^{2}[/tex]

where k is the spring constant (925 N/m) and x is the compression of the spring (3.00 meters).

Now, at the highest point on the incline, the final mechanical energy is the potential energy due to height:

Final Mechanical Energy = m * g * h

where m is the mass of the roller-coaster car (120.00 kg), g is the acceleration due to gravity (approximately 9.81 m/s²), and h is the height of the incline.

Setting the initial mechanical energy equal to the final mechanical energy:

(1/2) * k * [tex]x^{2}[/tex] = m * g * h

Now, let's plug in the known values and solve for h:

(1/2) * 925 N/m * [tex](3.00 m)^2[/tex] = 120.00 kg * 9.81 m/s² * h

925 N/m * 9 [tex]m^{2}[/tex] = 120.00 kg * 9.81 m/s² * h

8325 Nm = 1176.00 kgm²/s² * h

Now, divide both sides by 1176.00 kg*m²/s² to solve for h:

h = 8325 Nm / 1176.00 kgm²/s²

h ≈ 7.08 meters

Hence, the roller-coaster car will roll up approximately 7.08 meters up the incline before coming to a stop.

To know more about meters here

https://brainly.com/question/29367164

#SPJ2


Related Questions

Problem 23.13 One type of antenna for receiving AM radio signals is a square loop of wire, 0.16 m on a side, that has 20 turns. Part A If the magnetic field from the radio waves changes at a rate of 8.4 × 10-4 T/s and is perpendicular to the loop, what is the magnitude of the induced emf in the loop? Express your answer to two significant figures and include appropriate units. Value Units Submit My Answers Give Up back Continue

Answers

The induced emf by the formula that we have can be obtained as 4.3 * 10^-4 V.

What is the induced emf?

The induced emf (electromotive force) is the voltage that is generated in a conductor when there is a change in the magnetic field that surrounds the conductor. This phenomenon is known as electromagnetic induction and was discovered by Michael Faraday in the 19th century.

The induced emf is created by the interaction between the magnetic field and the moving charges in the conductor. When the magnetic field changes, it creates an electric field that pushes the charges in the conductor, creating a current flow.

Using emf = NAdB/dt

= 20 * (0.16)^2 *  8.4 × 10-4 T/s

4.3 * 10^-4 V

Learn more about emf:https://brainly.com/question/15121836

#SPJ1

a banked curve is safer than a flat curve because the ___ force required to keep the car from skidding is supplied by the horizontal component of the ___ force instead of friction.

Answers

Answer:

centripetal, normal

Why does the safety curtain need to be loosely draped?

Answers

The safety curtain needs to be loosely draped so that it will move easily with the movement of the actors. This will prevent any potential safety hazards from occurring, such as the curtain becoming stuck or snagging on any props or scenery.

Additionally, it is important for the curtain to not be too tight as this could prevent it from falling properly.
The safety curtain needs to be loosely draped so that it can fall easily in case of an emergency.What is a safety curtain?A safety curtain is a fire-resistant metal or asbestos curtain that is suspended above the stage of a theater. In the case of a fire, the curtain is designed to descend quickly and close off the stage area, preventing flames from spreading to the auditorium and providing an escape route for the actors and stage crew.

In the case of an emergency, the safety curtain must drop down without difficulty. That is why the safety curtain must be loosely draped. The safety curtain is supported by a counterweight and a rope system that is positioned over the stage's proscenium arch.

The safety curtain, for example, is used in theatres to protect the audience in the event of a fire. It's also used as a barrier between the stage and the audience. A fire-resistant cloth or metal shutter that, in the event of a fire, may be lowered to cut off the stage from the rest of the theatre is known as a safety curtain.

For more such questions on safety

https://brainly.com/question/29546272

#SPJ11

If the Kelvin temperature of an object is doubled, the amount of radiant energy emitted each second is _________ the original amount:a) 1/16thb) halfc) the same asd) 2 timese) 16 time

Answers

When the Kelvin temperature of an object is doubled, the amount of radiant energy emitted each second is E.  16 times the original amount.

The amount of energy emitted by a body of the Kelvin temperature varies according to the fourth power of its absolute temperature, according to Stefan's law. Radiant energy is emitted by a heated object because of the vibration of its particles. As a result, as the temperature of the body rises, so does the energy emitted from it. The energy radiated by a body is directly proportional to the temperature raised to the fourth power.

Therefore, the amount of energy radiated by a body is proportional to the fourth power of its absolute temperature, according to Stefan's law. Suppose the initial temperature of the object is T and the energy emitted per second is E. If the temperature of the object is doubled, the new temperature will be 2T. As a result, the amount of energy radiated by the object each second (E') would be calculated by: E' = E(2T /T )4E' = E(16)The amount of radiant energy emitted each second is 16 times the original amount when the Kelvin temperature of an object is doubled.

Know more about Stefan's law here:

https://brainly.com/question/30763196

#SPJ11

Calculate the mass in kg of a ball at a height of 3m above the ground with a potential energy of 120J.

Answers

The mass of the ball at a height of 3m above the ground with a potential energy of 120J can be calculated using the equation:

Mass = Potential Energy/Gravity * Height

Mass = 120J/(9.81m/s² * 3m)

Mass = 4.1 kg

Answer:

4 kg

Explanation:

Using,

Energy/ Work done = Force x Distance (Height)

E = F • s

But recall, that F = mg

Therefore,

E = m • g • s

Making mass (m), the subject of the formula

m = E / (g • s)

m = 120 / (10 • 3)

m = 120 / 30

m = 4 kg

But if g = 9.8 ms-¹

Then,

m = 120 / (9.8 • 3)

m = 120 / 29.4

m = 4.08 kg

Please mark brainliest.

Thanks

Person A stands on the ground, train B with proper length L moves to the right at speed 3c/5, and person C runs to the right at speed 4c/5. C starts behind the train and eventually passes it. Let event E1 be "C coincides with the back of the train," and let event E2 be "C coincides with the front of the train." Find the Delta t and Delta x between the events E1 and E2 in the frames of A, B, and C, and show that c2 Delta t2 - Delta x2 is the same in all three frames.

Answers

The Delta t and Delta x between the events E1 and E2 in the frames of A, B, and C, and show that c2 Delta t2 - Delta x2 is the same in all three frames. The Space time interval in all frames is [tex]\frac{144}{25}L^2[/tex].

In the following we will find out the time interval and space interval between the two events E1 and E2 with respective to  A, B and C.

Simultaneously we will find out space time interval in each case and finally show that they are the same.



In the frame of reference of C

The time interval is the time it takes for ( to Cover the contracted length of B.

with respect to C, B will have a relative velocity Ux' = (-5/13)C  (we had already found out it.Only the sign changes)

Then the contrasted length of B with respect to C.

would be L' =  [tex]L\sqrt{1 - \frac{Ux^2}{C^2}} = L\sqrt{1 - \frac{25}{169}}[/tex]

L' = (12/13)L

So dt = L'/un\x' =(12/13)L / (-5/13)C = (12/5)(L/C)

dx =0 as E1, and E2 occurs at the same point with respect to C. Now space time Interval is Cdt^2 = dx^2 =

[tex]C^2 \frac{144}{25}\frac{L^2}{C^2}-0 = \frac{144}{25}L^2[/tex]

The quantity of time between two given instances is referred to as time interval. In other words, it is the amount of time that has surpassed among the beginning and end of the event. it is also called elapsed time. interval of time is measured in special units. every unit describes a one of a kind quantity of time. some units are better appropriate to specific durations of time.

As an instance, if you were baking a cake within the oven, you will select to measure the time in minutes or perhaps in hours. in case you were calculating the time on your birthday from a particular date, you will choose to measure the time in days, weeks, or months (relying on how far away it became).

To learn more about Time interval visit here:

brainly.com/question/28210196

#SPJ4

In Copernicus' day, people were worried about the idea that the celestial sphere seemed to turn around us once a day because the Earth rotates. They argued that if the Earth were to rotate so fast, it should fly apart. According to our textbook, what was one response Copernicus had to this worry?

Answers

One response Copernicus had to this worry was that the Earth's rotation was not causing objects on Earth to fly off because the Earth's gravity was strong enough to hold them in place. Copernicus believed that the Earth was a sphere with a solid core and a liquid outer layer, and that the rotation of the Earth created a centrifugal force that was balanced by the force of gravity. This allowed objects on the surface of the Earth to remain in place despite the Earth's rotation.

Derive a formula for the efficiency of the Diesel cycle, in terms of the compression ratio �
1
/

2
V 1

/V 2

and the cutoff ratio �
3
/

2
.
V 3

/V 2

. Show that for a given compression ratio, the Diesel cycle is less efficient than the Otto cycle. Evaluate the theoretical efficiency of a Diesel engine with a compression ratio of 18 and a cutoff ratio of 2.

Answers

The theoretical efficiency of a Diesel engine with a compression ratio of 18 and a cutoff ratio of 2 is 0.94.

The efficiency of the Diesel cycle, denoted by η, can be expressed as a function of the compression ratio (r)
and the cutoff ratio (r_c)
as follows:
[tex]η = 1 - 1/(r^(r_c-1))[/tex]
This equation shows that as the compression ratio increases, the efficiency of the Diesel cycle increases.
When comparing the efficiency of the Diesel cycle to that of the Otto cycle, it can be seen that for a given compression ratio, the Diesel cycle is less efficient than the Otto cycle. To evaluate the theoretical efficiency of a Diesel engine with a compression ratio of 18 and a cutoff ratio of 2, we can use the equation above to calculate the efficiency as:
[tex]η = 1 - 1/(18^(2-1))[/tex]
η = 1 - 1/18
η = 0.94
Therefore, the theoretical efficiency of a Diesel engine with a compression ratio of 18 and a cutoff ratio of 2 is 0.94.

for such more question on theoretical efficiency

https://brainly.com/question/22224978

#SPJ11

2. What is the missing piece for the energy transformation for a flashlight? *
Chemical > Electrical > BLANK
& Thermal

Answers

The missing piece for the energy transformation for a flashlight is "Light" or "Radiant" energy. Chemical > Electrical > light & Thermal

What is meant by energy transformation?

Energy transformation is also known as energy conversion. It is the process of changing energy from one form to another. In physics, energy is a quantity that provides capacity to perform work or moving or provides heat.

The complete energy transformation for a flashlight is as :

Chemical (stored in the battery) > Electrical (when the battery powers the bulb) > Light/Radiant (when the bulb emits light) & Thermal (some of the energy is lost as heat due to resistance in the bulb and the circuit).

To know more about energy transformation, refer

https://brainly.com/question/28982142

#SPJ1

can you please help me ASAP​

Answers

Answer:

see attachment

Explanation:

The maximum number of electrons in any shell is given by formula 2n² , where n is the number of shell .So in first shell , 2(1)² = 2 electrons would be accommodated.

Similarly in second shell , 2(2)² = 8 electrons would be accommodated .

Similarly we can find out the maximum number of electrons in 3rd , 4th and 5th shell .

The maximum number of electrons in valance shell is 8 .

Also, atomic numbers of ,

Helium = 2Carbon = 6 Neon = 10Sodium = 11Aluminium = 13Chlorine = 17

and we are done!

work done on an object will increase that amount of energy the object has. the increase in energy can come from increases in blank .

Answers

The increase in energy can come from increases in work.

Describe what would happen to that balance if the temperature of a star suddenly dropped. What would happen if the temperature suddenly rose? What would happen if the density suddenly increased without a change in temperature? What would happen if the cloud gained a little bit of mass?

Answers

The cloud would begin to collapse if the temperature abruptly dropped as would the pressure, giving gravity the upper hand.

The pressure would rise with a rise in temperature, and the fog would start to grow.

The cloud would start to collapse if it gained a little mass because gravity would dominate.

What is the relationship between pressure, temperature, and gravity in a molecular cloud?

In a molecular cloud, pressure, temperature, and gravity are all interconnected and play crucial roles in determining the cloud's properties and evolution.

Gravity is the force that holds the molecular cloud together and determines its overall shape and density. The more massive the cloud, the stronger its gravitational force and the tighter it can hold onto its gas and dust.

Temperature is related to the thermal energy of the gas and dust within the cloud. As the gas and dust particles move around, they collide with each other, transferring energy in the form of heat.

The pressure of a molecular cloud is determined by the temperature and density of the gas and dust within it. As the temperature increases, the pressure also increases. Similarly, as the density of the gas and dust increases, the pressure also increases.

Learn more about molecular clouds at: https://brainly.com/question/26978645

#SPJ1

Complete question:

Suppose pressure and gravity are perfectly balanced within a certain molecular cloud. Describe what would happen to that balance if the temperature suddenly dropped. What would happen if the temperature suddenly rose? What would happen if the density increased without a change in temperature? What would happen if the cloud gained a little bit of mass?

If the frequency of a wave increases, the wavelength will
O decrease
O increase
O disappear
O remain unchanged

Answers

Answer:

the wavelength will decrease

Explanation:

If the frequency of a wave increases, the wavelength will decrease. This is because the speed of the wave is constant for a given medium, so if the frequency (the number of waves passing a fixed point per second) increases, then the distance between successive wave crests (i.e., the wavelength) must decrease to maintain a constant speed. This relationship is described by the wave equation:

v = f λ

where v is the speed of the wave, f is the frequency, and λ is the wavelength. If v is constant and f increases, then λ must decrease to keep the equation balanced.

when a ball is thrown upward at an angle what happens to the vertical component of its velocity as it rises as it falls

Answers

As the ball is thrown upward at an angle, the vertical component of its velocity will decrease as it rises and increase as it falls. This is because of the gravitational force which acts in the opposite direction.

The vertical component of the velocity decreases as the ball rises and increases as the ball falls back to the ground. When an object is thrown upward, it has an initial velocity composed of both a horizontal and a vertical component. The horizontal component of the velocity is constant, while the vertical component of the velocity changes due to the force of gravity.

The vertical component of the velocity decreases as the ball rises due to the force of gravity. When the ball reaches its maximum height, the vertical component of the velocity is zero. As the ball falls back to the ground, the vertical component of the velocity increases due to the force of gravity until it reaches its maximum velocity just before hitting the ground.

For more such questions on velocity , Visit:

https://brainly.com/question/24445340

#SPJ11

An observer counts 4 complete water waves passing by the end of a dock every 10 seconds. What is the
frequency of the waves?
a) 4,0 Hz
b) 0.40 Hz
() 40 Hz
d) 2.5 Hz

Answers

The frequency of the water wave is 0.4Hz (option B).

How to calculate frequency?

Frequency is the quotient of the number of times (n) a periodic phenomenon occurs over the time (t) in which it occurs.

The frequency of a wave can be calculated by dividing the number of occurrence by time as follows;

f = n/t

Where;

f = frequencyn = number of times of occurrencet = time

According to this question, an observer counts 4 complete water waves passing by the end of a dock every 10 seconds. The frequency can be calculated as follows:

f = 4/10

f = 0.4Hz

Learn more about frequency at: https://brainly.com/question/3795295

#SPJ1

Water is pumped through the hose shown below, from a lower level to an upper level. Compared to the water at point 1, the water at point 2:

a.has less speed and less pressure
b.has greater speed and less pressure
c.has greater speed and greater pressure
d.has less speed and greater pressure

Answers

So you need to have studied the Bernoulli theorem. Basically the p + pgh + pv^2/2 remains constant
We can also apply equation of continuity in the horizontal tubes
A1v1 = A2v2
Clearly area of tube 2 is smaller so velocity will be more

Now tube 2 has a greater pressure and height so according to Bernoulli’s theorem tube 2 has lower pressure

The water at tube 2 has higher speed and lower pressure

The correct option is d has less speed and greater pressure.

How water flow?

Water flows through a combination of gravity and pressure. The movement of water is caused by the force of gravity, which causes water to flow downhill from higher to lower elevations. When water is pumped or forced through a system, pressure is added to the water, causing it to flow in the desired direction.

Water flows through a system of pipes, hoses, or channels, depending on the application. The velocity of water flow depends on various factors, including the diameter of the pipe or channel, the amount of water being pumped or released, and the pressure of the system.

In addition to gravity and pressure, other factors can affect the flow of water, including friction, viscosity, and turbulence. Understanding these factors is essential for designing efficient water systems that can deliver water where it is needed, such as in homes, farms, and cities.

Based on the diagram, the water at point 2 has a greater height than point 1, so it has a higher gravitational potential energy. Therefore, the water at point 2 must have a lower kinetic energy than point 1. Since the kinetic energy of water is related to its speed, we can conclude that the water at point 2 has less speed than point 1.

However, since the water is being pumped from a lower level to an upper level, it means that energy is being added to the system, which increases the pressure of the water. Therefore, the water at point 2 has a greater pressure than point 1.

Thus, the correct option is d) has less speed and greater pressure.

To know more about pressure visit:-

https://brainly.com/question/24719118

#SPJ1

Psychology is the study of behavior and mind.
True
False

Answers

Answer:

Base on my experience the answer is True...

Answer: True

Explanation:

Please Use microsoft excel


A pair of identical coils, each having a radius of 50 cm, are
separated by a distance equal to their radii, i.e. 50 cm. These
'Helmholtz Coils', are coaxial and carry equal currents such that
their axial fields point in the same direction. Assume the current in
each is 20 A, and there are 500 turns in each coil. Calculate, and
plot, the axial magnetic field for - 3m < z < +3m.

Answers

Answer:

Explanation:

Sure, we can use Microsoft Excel to calculate and plot the axial magnetic field for the given Helmholtz Coils.

Here's how we can proceed:

Create a new Excel workbook and open a new worksheet.

Label the first column as "z (m)" and enter the values from -3m to +3m in increments of 0.01m. This can be done by entering -3 in the first cell, and then dragging the fill handle down to fill the cells with the desired values.

Label the second column as "B (T)".

Use the following formula to calculate the axial magnetic field at each point:

B = (μ0 * n * I * R^2) / (2 * (R^2 + z^2)^(3/2))

where μ0 is the magnetic constant (4π x 10^-7 T·m/A), n is the number of turns per coil (500), I is the current in each coil (20 A), R is the radius of each coil (0.5 m), and z is the distance along the axis of the coils.

To apply this formula in Excel, enter the following formula in the second row of the "B (T)" column, and then drag the fill handle down to fill the rest of the column:

=(4PI()10^(-7)500200.5^2)/(2((0.5)^2+(A2)^2)^(3/2))

This formula calculates the magnetic field at the corresponding value of z in the first column. Note that the cell reference "A2" refers to the first value of z in the first column.

Once the "B (T)" column is filled with values, we can create a line graph to plot the axial magnetic field as a function of distance along the axis of the coils. To do this, select the "z (m)" and "B (T)" columns, including the column headings, and then click on the "Insert" tab and select "Line" from the "Charts" section. Choose the "Line with markers" style for the graph and format it as desired.

The resulting graph will show the axial magnetic field as a function of distance along the axis of the coils, which should resemble a symmetrical bell-shaped curve with a maximum value at the center of the coils.

on the grid below sketch at least one complete cycle of a transverse wave with a 4.0 centimeter amplitude a freuqncy of 5.0 hertz

Answers

Draw the complete cycle of the wave by repeating the pattern of the peak, the equilibrium position, and the trough, with a distance of λ between each consecutive peak or trough. The number of cycles per second, or the frequency, should be 5.0 hertz.

What is Wave?

A wave is a disturbance that propagates through space and time, often transferring energy from one location to another without the physical transfer of matter. Waves can take many different forms, including sound waves, electromagnetic waves, and mechanical waves.

Draw a horizontal axis representing time, labeled in seconds or milliseconds.

Draw a vertical axis representing displacement or amplitude, labeled in centimeters or meters.

Choose a starting point for the wave, which represents the equilibrium position of the medium.

Draw the peak of the wave, which represents the maximum displacement of the medium from its equilibrium position. This should be 4.0 centimeters above the equilibrium position.

Draw the trough of the wave, which represents the minimum displacement of the medium from its equilibrium position. This should be 4.0 centimeters below the equilibrium position.

Determine the wavelength of the wave, which is the distance between two consecutive peaks or troughs. This can be calculated using the formula λ = v/f, where λ is the wavelength, v is the velocity of the wave, and f is the frequency. For a transverse wave on a string, the velocity is given by v = √(T/μ), where T is the tension in the string and μ is the linear mass density of the string.

Learn more about Wave from the given link

https://brainly.com/question/25699025

#SPJ1

The compressions in a sound wave are far apart and more energy is supplied by the vibrating source. Which statement best describes how this will affect the wave and what you hear?

A: The wavelength will increase, and the sound will become louder.
B: The amplitude will increase, and the sound will become louder.
C: The frequency will increase, and the pitch will become higher.
D: The intensity will increase, and the pitch will become higher.

Answers

The sound will get louder and the amplitude will rise. The separation between compressions in a sound wave indicates that the wave's wavelength has grown.

What happens when a sound wave is compressed and rarefied?

When particles travel in close proximity to one another, compression occurs, creating areas of intense pressure. In contrast, when particles are separated from one another in low-pressure locations, rarefactions take place. As the tines of a vibrating tuning fork move back and forth, compressions and rarefactions are produced.

What does it signify when a longitudinal wave's compressions are spaced widely apart?

Compressions and rarefactions are terms used to describe where a medium's particle distribution spreads out farther from one another.

To know more about amplitude visit:-

https://brainly.com/question/13110234

#SPJ1

A slingshot consists of a light leather cup attached between two rubber bands. It takes a force of 33 N to stretch the bands 1.3 cm.A) What is the equivalent spring constant of the rubber bands? Answer in n/m.B) How much force is required to pull the cup of the slingshot 4.2 cm from its equilibrium position? Answer in units of N.

Answers

The force needed to pull the cup of the slingshot 4.2 cm from its equilibrium position is 2667N/m.

From the Hook's law, the spring constant may be expressed as follows:

k=F / x

wherein F=32N is the elastic pressure (which is identical to the applied one if rubber bands do no longer flow after stretching), and x=1.2cm=0.012m is the elongation of the bands.

k= 32N / 0.012m ≈ 2667N/m

A slingshot is a handheld projectile weapon that uses elastic materials, such as rubber bands or natural fibers, to propel small projectiles. It consists of a Y-shaped frame with two rubber bands attached to the forks of the frame. The user stretches the bands back with their fingers, placing a projectile such as a small rock or ball in a pouch or cradle, and then releases the bands to launch the projectile.

Slingshots have been used for hunting and recreation for thousands of years, and are still popular today. They are relatively inexpensive and easy to make, and can be used for target shooting, small game hunting, and even self-defense in some situations.

To learn more about Slingshot visit here:

brainly.com/question/31135747

#SPJ4

You are pulling water with a constant velocity from a well using a crank of lengthL . If the length of the crank was doubled, you could ...A: pull up the water with the same work, but less forceB: pull up the pail with half the number of revolutionsC: exert double the torque while pulling up the pail with half the workD: pull up the pail with half the work and half the forceE: pull up double the amount of water with the same workF: exert four times the torque while pulling up the pail with the same work

Answers

The correct option is A, If the length of the crank was doubled, you could pull up the water with the same work, but less force.

The term "crank" can have various meanings depending on the context. In the context of machinery or engines, a crank is a mechanical device that converts rotational motion into linear motion or vice versa. It typically consists of a rod with a crankpin that connects to a piston or other reciprocating part.In a different context, the term "crank" can refer to a person who holds unconventional or extreme views and insists on expressing them in a forceful or annoying way.

Such a person may be described as a "crank" or "crankpot." The term can also refer to someone who is mentally unbalanced or eccentric. Furthermore, in the context of illegal drugs, "crank" is a slang term for methamphetamine, a highly addictive stimulant that can cause serious health problems and addiction. It is usually sold in crystalline form and can be smoked, snorted, or injected.

To learn more about Crank visit here:

brainly.com/question/15675129

#SPJ4

Complete Question: -

You are pulling water with a constant velocity from a well using a crank of lengthL . If the length of the crank was doubled, you could ...

A: pull up the water with the same work, but less force

B: pull up the pail with half the number of revolutions

C: exert double the torque while pulling up the pail with half the work

D: pull up the pail with half the work and half the force

E: pull up double the amount of water with the same work

F: exert four times the torque while pulling up the pail with the same work

A 4.0 kg slides with an initial speed of 3.0m/s towards a spring on a frictionless horizontal surface. When the box hits the spring, the spring compresses by
0.30 m. What is the spring constant?

Answers

The  spring constant is 400 N/m. For the given question.

What is spring constant ?

The spring constant (k) is a physical property of a spring, which represents the stiffness of the spring. It is defined as the force required to stretch or compress a spring by a certain amount (x) divided by that amount of deformation:

k = F/x

where F is the applied force and x is the displacement or deformation of the spring from its equilibrium position. The spring constant has units of force per unit of length, such as newtons per meter (N/m) in the SI system of units. A higher spring constant means that more force is required to deform the spring by the same amount, and the spring is considered to be stiffer. Conversely, a lower spring constant means that less force is required to deform the spring by the same amount, and the spring is considered to be more flexible.

We can use the conservation of energy to find the spring constant.

Initially, the box has kinetic energy given by:

K₁= (1/2)mv₁²

= (1/2)(4.0 kg)(3.0 m/s)²

= 18 J

At maximum compression, all of the kinetic energy is stored as potential energy in the spring. The potential energy stored in a spring is given by:

U = (1/2)kx²

where k is the spring constant and x is the displacement from the equilibrium position. In this case, x is the compression of the spring, which is 0.30 m.

So, the potential energy stored in the spring is:

U = (1/2)kx²

= (1/2)k(0.30 m)²

= 0.045k J

Since energy is conserved, we can equate the initial kinetic energy to the potential energy stored in the spring:

K₁= U

18 J = 0.045k J

k = 400 N/m

Therefore, the spring constant is 400 N/m.

To know more about springs visit :-

https://brainly.com/question/14670501

#SPJ1

what is the formula for finding the magnetic filed strength at a point due to a current-carrying wire​

Answers

Answer:

The strength of the magnetic field created by current is:

B=μ₀I / 2 π R

where I is the current

R is the shortest distance to the wire

The constant μ₀ is 4π * 10^-7 T * m / s

Explanation:

An illustration of a circle with an arrowhead on the circle pointing counterclockwise. at a point near the top of the circle is a dot with 4 vectors from it. Vector A is circular counterclockwise along the circle, vector c toward the center of the circle, a vector tangent to the circle and counterclockwise labeled B and a vector away from the center of the circle labeled D and a vector halfway between vectors B and D labeled C.
Aldis is swinging a ball tied to the end of a string over his head. Suddenly, the string breaks and the ball flies away.

Arrow
✔ B
best represents the path the ball follows after the string breaks.

Correct awnser is B

Answers

Given the fact that the linear velocity of the ball is tangential to the circle then it is shown by vector B

What is the direction of the tangential velocity of a ball that flies out of a circular path?

When a ball flies out of a circular path, the direction of its tangential velocity is tangent to the point at which it leaves the circular path.

To visualize this, imagine a ball tied to a string and whirled around in a circle. As the ball is released, it will move away from the center of the circle in a straight line. At the moment it leaves the circular path, its velocity vector will be tangent to the circle, pointing in the direction of its motion.

If the ball is flying out of the circle in a clockwise direction, then its tangential velocity vector will point to the right. If it is flying out of the circle in a counterclockwise direction, then its tangential velocity vector will point to the left.

Learn more about tangential velocity:https://brainly.com/question/28738284

#SPJ1

Suppose a NASCAR race car rounds one end of the Martinsville Speedway. This end of the track is a turn with a radius of approximately 57.0 m . If the track is completely flat and the race car is traveling at a constant 27.5 m/s (about 62 mph ) around the turn, what is the race car's centripetal (radial) acceleration? What is the Coefficient of friction?

Answers

Answer:

Explanation:

The centripetal acceleration of the race car is given by the formula:

a = v^2 / r

where v is the speed of the race car and r is the radius of the turn.

Substituting the given values, we get:

a = (27.5 m/s)^2 / 57.0 m = 13.3 m/s^2

So the centripetal acceleration of the race car is 13.3 m/s^2.

To find the coefficient of friction, we need to use the formula:

f = μN

where f is the force of friction, μ is the coefficient of friction, and N is the normal force.

The normal force is equal to the weight of the car, which we can calculate as:

N = mg

where m is the mass of the car and g is the acceleration due to gravity (9.81 m/s^2).

Assuming the mass of the car is 1500 kg, we get:

N = 1500 kg × 9.81 m/s^2 = 14,715 N

The force of friction is equal to the centripetal force required to keep the car moving in a circle:

f = ma = (1500 kg)(13.3 m/s^2) = 19,950 N

Substituting the values of N and f into the formula for friction, we get:

19,950 N = μ(14,715 N)

Solving for μ, we get:

μ = 1.35

So the coefficient of friction is 1.35.

In this circuit, what is the potential difference across C4?
Use the following values in your calculation:
V = 12.0 V
C1 = 3.0 ?F
C2 = 2.0 ?F
C3 = 2.0?F
C4 = 1.0 ?F
C5 = 4.0 ?F
V4 =

Answers

The potential difference across C4 can be found using the equation V = V4 - V3. Using the given values, V = 12.0V, C1 = 3.0 ?F, C2 = 2.0 ?F, C3 = 2.0 ?F, C4 = 1.0 ?F, and C5 = 4.0 ?F, we can solve for V4.



V4 = 12.0V + (3.0 ?F + 2.0 ?F + 2.0 ?F + 1.0 ?F) / (1.0 ?F + 4.0 ?F)
V4 = 12.0V + (8.0 ?F / 5.0 ?F)
V4 = 12.0V + 1.6V
V4 = 13.6V
Therefore, the potential difference across C4 is 13.6V - 12.0V = 1.6V.
The potential difference across C4 can be determined using the formula Q = CV. Where Q represents the charge stored in the capacitor, C represents capacitance, and V represents the potential difference across the capacitorTo determine the potential difference across C4, we can use the formula Q = CV. To determine Q, we need to determine the equivalent capacitance of the circuit.

The equivalent capacitance of capacitors in parallel is equal to the sum of their capacitance. The equivalent capacitance of capacitors in series is equal to the reciprocal of the sum of their reciprocals.C1, C2, and C3 are in series, and their equivalent capacitance is given by:C_eq1=1/((1/C1)+(1/C2)+(1/C3))=1/(1/3+1/2+1/2)=3/7 μF{C_eq1=1/((1/C1)+(1/C2)+(1/C3))=1/(1/3+1/2+1/2)=3/7μF}C_eq2 is the equivalent capacitance of C4 and C5 in parallel.C_eq2=C4+C5=1+4=5μF {C_eq2=C4+C5=1+4=5μF}

Now we can determine the equivalent capacitance of the entire circuit.C_eq=C_eq1+C_eq2=3/7+5=38/7μF{C_eq=C_eq1+C_eq2=3/7+5=38/7μF}Now, we can determine the charge stored in the circuit.Q=C_eqV=38/7*12= 65.14μC{Q=C_eqV=38/7*12=65.14μC}To determine the potential difference across C4, we can use the formula Q = CV.V=C4Q/C4= 65.14/1 = 65.14V{V=C4Q/C4=65.14/1=65.14V}Therefore, the potential difference across C4 is 65.14 V.

For more such questions on potential difference

https://brainly.com/question/3535763

#SPJ11

A uniform electric field ai + bj intersects a surface of area A. What is the flux through this area if the surface lies (a) in the yz plane? (b) in the xz plane? (c) in the xy plane?

Answers

Answer:

Explanation:

The electric flux through a surface is given by the dot product of the electric field and the area vector of the surface:

Φ = E · A

where Φ is the electric flux, E is the electric field, and A is the area vector of the surface.

(a) If the surface lies in the yz plane, its area vector is in the x direction. Therefore, the area vector can be written as A = Ax i, where Ax is the magnitude of the area. The electric field is given as E = ai + bj. Therefore, the flux through the surface is:

Φ = E · A = (ai + bj) · (Ax i) = aAx

(b) If the surface lies in the xz plane, its area vector is in the y direction. Therefore, the area vector can be written as A = Ay j, where Ay is the magnitude of the area. The electric field is given as E = ai + bj. Therefore, the flux through the surface is:

Φ = E · A = (ai + bj) · (Ay j) = bAy

(c) If the surface lies in the xy plane, its area vector is in the z direction. Therefore, the area vector can be written as A = Az k, where Az is the magnitude of the area. The electric field is given as E = ai + bj. Therefore, the flux through the surface is:

Φ = E · A = (ai + bj) · (Az k) = 0

since the dot product of perpendicular vectors is zero.

Adding salt to water increases the water’s boiling point.

If you performed an experiment to test this hypothesis, which action would introduce confounding variables into your experiment?

Answers

Answer:

Explanation:

Adding other substances to the water besides salt, such as sugar or baking soda, would introduce confounding variables into the experiment. Other factors that could introduce confounding variables include using different volumes of water, using different amounts of salt, and heating the water at different rates. To minimize confounding variables, it is important to keep all variables constant except for the one being tested, which in this case is the effect of salt on the boiling point of water.

A glass marble whose mass is 0.1 kg falls from a height of 40 m and rebounds to a height of 10 m. Find the impulse and the average force between the marble and the floor if the time during which they are in contact is 0.1 sec.
[Take g= 9.8 ms^-2]​

Answers

(a) The impulse between the marble and the floor is -3.23 Ns.

(b) The average force F between the marble and the floor is -32.3 N.

What is the impulse of the marble and floor?

We can use the principle of conservation of energy to find the velocity of the marble just before it hits the ground:

Initial potential energy = mgh = 0.1 kg × 9.8 m/s² × 40 m = 39.2 J

Final kinetic energy = (1/2)mv²

39.2 J = (1/2) × 0.1 kg × v²

v = √(2 × 39.2 J / 0.1 kg) = 88.4 m/s

When the marble hits the ground, it experiences a force due to the floor that changes its momentum. The impulse J of this force can be calculated as:

J = Δp = mΔv

where;

Δv is the change in velocity and m is the mass of the marble.

The change in velocity is given by:

Δv = vf - vi

where;

vf is the final velocity of the marble just after rebounding and vi is its velocity just before hitting the floor.

We know that vi = 88.4 m/s, and we can find vf using the conservation of energy principle again:

Final potential energy = mgh = 0.1 kg × 9.8 m/s² × 10 m = 9.8 J

Initial kinetic energy = (1/2)mv² = (1/2) × 0.1 kg × (88.4 m/s)² = 389.8 J

389.8 J = 9.8 J + (1/2)mvf²

vf = √(2 × (389.8 - 9.8) J / 0.1 kg) = 56.1 m/s

Therefore, the impulse is:

J = mΔv = 0.1 kg × (56.1 m/s - 88.4 m/s) = -3.23 N·s

The negative sign indicates that the impulse is in the opposite direction to the initial velocity.

The average force F between the marble and the floor can be found using the formula:

F = J / Δt

where;

Δt is the time during which the marble and the floor are in contact.

In this case, Δt = 0.1 s, so:

F = J / Δt = (-3.23 N·s) / 0.1 s = -32.3 N

Again, the negative sign indicates that the force is in the opposite direction to the initial velocity.

Learn more about impulse here: https://brainly.com/question/2193212

#SPJ1

Other Questions
For a UART module with (8N1) format (which means 8 data bits, No parity and 1 stop bit), and Baudrate of 1000 Baud-per-second. Assume the channel is used at its full capacity. choose all the true statements:1. The bitrate is 1000 bit/sec.2. The data rate is 1000 bit/sec.3. The data rate is 800 bit/sec.4. The bitrate is 2000 bit/sec. What does the idiom in this text suggest?In September 2013, President Obama stated that he was on the fence about ordering a military strike against Syria.The president was undecided about the military strike.The president was enthusiastic about the military strike Other things equal, relatively poor countries tend to grow a. slower than relatively rich countries; this is called the poverty trap.b. slower than relatively rich countries; this is called the Malthus effect.c. faster than relatively rich countries; this is called the catch-up effect.d. faster than relatively rich countries; this is called the constant-returns-to-scale effect. Bel-Ami, Partie I, chapitre 6, pp. 158-161, l.713-804, de Norbert de Varenne reprit Je nai que la rime . Partie I, chapitre 7, pp. 182-190, l. 344-550, de Et il fut pris brusquement mon pauvre chri Partie I, chapitre 8, pp. 211-213, l. 555-609, de Le silence de la chambre lapproche frmissante du bonheur Quel est le thme commun entre ces 3 passages ? Is the Valley Curtain Art? Why/why not? In you answer, consider these questions:Does a work of art need to be permanent to be considered "real" art?Does it need to be in a form that can be collected and displayed by galleries and museums?How is our experience of an ephemeral piece different than a permanent work? A court is most likely to pierce the corporate veil when the Multiple Choice liability claim involves some sort of tort by the corporation's employees. corporation has been capitalized adequately. o o nature of a liability claim involves a voluntary trade creditor. poor financial condition of the company has been correctly represented to creditors. chapter 3 the combination of (relatively) stable physical, behavioral, and mental characteristics that give individuals their unique identities are known as values. true or false Find the area of the triangle. which of the following functions will result in the composition not being a function of real values? which one of the following molecules has the highest boiling point? you will explain why in the next question. responses 3-methoxy-1-propanol 3-methoxy-1-propanol 1,2-dimethoxyethane 1,2-dimethoxyethane 1,4-butanediol 1,4-butanediol 1,1-dimethoxyethane 1,1-dimethoxyethane 2-methoxy-1-propanol In general, cross-border strategic alliances are more ______ and ______ than domestic strategic alliances, especially in emerging markets. Reasons why Prince Louis Napoleon made the following statement on the instability of France political system "it's difficult in France to make reforms we make revolutions,not reforms" An appliance dealer sells three different models of upright freezers having 13.4, 15.8, and 19.3 cubic feet of storage space. Consider the random variable x - the amount of storage space purchased by the next customer to buy a freezer. Suppose that x has the following probability distribution. x P(x) 13.4 0.2 15.8 0.5 19.3 0.3 (a) Calculate the mean and standard deviation of x (in cubic feet). (Hint: See Example 6.15. Round your standard deviation to four decimal places.) x = _____ cubic ftx = _____ cubic ft suppose a client insists on her office completing some of the work of digitizing documents. what should you negotiate? Morgan sampled 101 students and calculated an average of 6.5 hours of sleep each night with a standard deviation of 2.14. Using a 90% confidence level, she also found that t* = 1.660.A 90% confidence interval calculates that the average number of hours of sleep for working college students is between __________ hours. Answer choices are rounded to the hundredths place.a.)6.15 and 6.85b.)6.46 and 6.54c.)6.46 and 6.85d.)6.08 and 6.92 You work in a firm that operates only in the domestic market. Therefore, the managers of this form do not need to worry about MNEs, globalization, etc. True. Not enough information to tell False. A nursing student is teaching the client regarding insertion of a central line catheter. Which statement by the student would cause the nurse to intervene?-"The risks are the same for a central line as they are for peripheral lines."-"Central lines can prevent multiple sticks to gain intravenous access."-"A central line can stay in longer than a peripheral catheter."-"Multiple medications can be infused through a central line catheter." the nature company manufactures cereal using only organic ingredients. to find out what the public wants in a cereal, the nature company uses mobile surveys because it can share photos, videos, and voice recordings with new and potential customers via smartphones. the advantage of mobile research shown in this example is . to be counted as employed in the u.s. labor force statistics, a person 50 POINTS!!!!! NEED HELP ASAP!!!!! RUNNING OUT OF TIME!!!!!