a 108-watt light bulb is left on for 28 hours. how much did it cost to operate the light bulb if electricity costs 0.04 dollars per kwh?

The IP address of www.iitb.ac.in is 160.36.58.45.
1. Run nslookup to obtain the IP address of the web server for the Indian Institute of Technology in Bombay, India: www.iitb.ac.in. What is the IP address of www.iitb.ac.in?

The IP address of the DNS server that provided the answer to your nslookup command in question 1 above is 202.41.82.3.
2. What is the IP address of the DNS server that provided the answer to your nslookup command in question 1 above?

The answer to your nslookup command in question 1 above came from an authoritative server.
3. Did the answer to your nslookup command in question 1 above come from an authoritative or non-authoritative server?

The name of the authoritative name server for the iit.ac.in domain is ns.iit.ac.in. To find the IP address of this authoritative name server, you can use the nslookup command and specify the domain name as the argument.
4. Use the nslookup command to determine the name of the authoritative name server for the iit.ac.in domain. What is that name? (If there are more than one authoritative servers, what is the name of the first authoritative server returned by nslookup)? If you had to find the IP address of that authoritative name server, how would you do so?

The packet number for the DNS query message resolving the name gaia.cs.umass.edu is 6. This query message is sent over UDP.
5. Locate the first DNS query message resolving the name gaia.cs.umass.edu. What is the packet number in the trace for the DNS query message? Is this query message sent over UDP or TCP?

The packet number for the corresponding DNS response to the initial DNS query is 8. This response message is received via UDP.
6. Now locate the corresponding DNS response to the initial DNS query. What is the packet number in the trace for the DNS response message? Is this response message received via UDP or TCP?

The destination port for the DNS query message is 53. The source port of the DNS response message is also 53.
7. What is the destination port for the DNS query message? What is the source port of the DNS response message?

The DNS query message is sent to the IP address 8.8.8.8
8. To what IP address is the DNS query message sent?

The DNS query message contains 1 question and 0 answers.
9. Examine the DNS query message. How many "questions" does this DNS message contain? How many "answers" answers does it contain?

The DNS response message to the initial query message contains 1 question and 1 answer.
10. Examine the DNS response message to the initial query message. How many "questions" does this DNS message contain? How many "answers" answers does it contain?

Learn more about IP address

brainly.com/question/31026862

#SPJ11

Algorithms are predetermined procedures that always lead to the same result.

To learn more about algorithm, refer to:

https://brainly.com/question/24953880

When developing IS security policies, organizations should pay particular attention to a. user education.

IS security policies are established to ensure that the security of the information system is maintained at all times. There are many ways to prevent unauthorized access to the system and to protect it from hackers, viruses, and other threats. User education is the aspect of developing IS security policies that organizations should pay particular attention to. This is important because it is through education that users learn about the importance of maintaining the security of the information system.

Users must understand why they need to maintain the security of the information system, what they can do to prevent unauthorized access to the system, and how to respond if there is a security breach. For example, users should know the importance of using strong passwords, not sharing their passwords with others, and not clicking on links from unknown sources. In addition, users should be trained on how to use the security features of the system, such as firewalls and antivirus software.

Therefore, organizations must ensure that their employees receive regular training on IS security policies and that they are aware of the risks and consequences of not following them.

Learn more about  IS security policies:https://brainly.com/question/13169523

#SPJ11

Organizations should pay particular attention to user awareness when developing IS security policies.

What should organizations pay particular attention?

When developing IS security policies, organizations should pay particular attention to user awareness.

What is IS security?Information Security (IS) is the process of safeguarding information from unauthorized access, misuse, theft, and disruption, as well as ensuring its availability to authorized users.

This is crucial for companies, government agencies, and other organizations that rely on the data they collect, process, and store to conduct their activities.

Policies of IS securityThe security policies that an organization develops assist in ensuring that users follow security protocols, assist in safeguarding confidential data, and increase the organization's overall security.

Information security policies are an organization's guidelines for safeguarding its information and data from unauthorized access, destruction, or tampering.

It guides and regulates the organization's employees' and authorized personnel's behavior in terms of the use of technology systems and the protection of confidential data.

Paying attention to User awarenessThe organization should pay particular attention to user awareness.

The human factor is frentequly a source of risk for businesses, so employee awareness is crucial to the success of an information security program.

The most recent version of the information security policy should be shared with all employees, and they should be provided with regular training sessions to understand the importance of information security and the appropriate steps to take when handling confidential information.

It's vital to create a culture of information security, and the only way to achieve this is to ensure that employees understand the policies and why they're important.

Learn more about: organizations

brainly.com/question/13278945

#SPJ

Often, programmers list the constructor first because it is the first method used when an object is created.

A constructor is a unique method of the class that is executed when an instance of a class is created. It has the same name as the class and is created as a separate method. The constructor is also used to assign values to variables when the object is created. You can define constructors with or without parameters. The object's properties and variables can be initialized with the help of a constructor. Here's an example of how to create a constructor:

class Car {

String name;

int model_number;

Car(String name, int model_number) {

// The constructorthis.name = name;

this.model_number = model_number;

}

public static void main(String[] args) {

  Car car1 = new Car("BMW", 11);

  Car car2 = new Car("Audi", 2021);

   System.out.println(car1.name + " " + car1.model_number);

   System.out.println(car2.name + " " + car2.model_number);

   }

}

As we have defined a constructor for the Car class and used the Car object to initialize the name and model_number properties.

Learn more about constructor visit:

https://brainly.com/question/13025232

#SPJ11

Excel's text formatting style is applied to the selected cell or cells when you underline cell content. To highlight or call attention to certain content inside a cell, underline it.

A cell is a rectangular box used to store data in a spreadsheet or table. It is the fundamental component of a spreadsheet and is used to arrange, work with, and examine data. The unique column letter and row number assigned to each cell in a spreadsheet can be used to refer to that cell in formulas and calculations. To make cells more aesthetically pleasing or to draw attention to certain data, multiple colour schemes, font styles, border designs, and alignment options can be applied. They may also include text, numbers, calculations, photos, charts, and other sorts of data.

Learn more about A cell here:

https://brainly.com/question/1675645

#SPJ4

To display the Visual Basic window, you click the Create tab on the ribbon, and then click Visual Basic. The given statement is true.

Ribbon- A ribbon is a user interface feature that groups a set of toolbars into one compact strip with buttons organized under task-specific tabs. Ribbons serve the same function as menus, but with larger, more graphical buttons that make it easier to locate the desired command.

Usefulness of ribbon- The ribbon is useful in the sense that it replaces drop-down menus with a tabbed toolbar interface that enables users to choose from a range of features for a given program. Since the Ribbon organizes all of the features into different tabs, it makes it easier for users to locate a feature they need.

Visual Basic window- The Visual Basic window is the interface that Visual Basic uses. It consists of a form on which to drag and drop controls, a menu bar, a toolbar, and an area known as the code editor. Visual Basic's functionality is accessible through its menu bar, toolbar, and code editor. When a user chooses a menu option or clicks a toolbar button, Visual Basic responds by executing code that has been previously programmed to handle the requested functionality.

To learn more about "visual basic window", visit: https://brainly.com/question/29458883

#SPJ11

Answer:

AGP would be the most relevant to video cards

Explanation:

AGP (Accelerated Graphics Port) is a type of bus used for connecting graphics cards to the motherboard of a computer. It was specifically designed to provide a high-speed connection between the graphics card and the CPU, allowing for faster and more efficient processing of graphics-intensive applications such as video games and multimedia editing software.

For N = 100,000, total time = 100,000/1,000 = 100 seconds.

For N = 100,000, total time = 100,000/2,500 (2,500 being the total download/upload capacity of the two groups combined) = 40 seconds

For a client-server solution, the total time until the last client receives the patch will be dependent on the number of users (N) and the capacity of the server pool to support simultaneous downloads. Assuming Microsoft's server pool can support 1,000 simultaneous downloads and the clients are mixed (50% with 1Mbps download/500Kbps upload capacity, 50% with 5Mbps download/500Kbps upload capacity), the total time until the last client has received the patch will be: For N = 100,000, total time = 100,000/1,000 = 100 seconds.

For a perfect Bit Torrent-style P2P distribution system, the total time until the last client has received the patch will be dependent on the number of nodes (N) and the download/upload capacities of each node. Assuming the clients are mixed (50% with 1Mbps download/500Kbps upload capacity, 50% with 5Mbps download/500Kbps upload capacity), the total time until the last client has received the patch will be:
For N = 100,000, total time = 100,000/2,500 (2,500 being the total download/upload capacity of the two groups combined) = 40 seconds.

Learn more about   Microsoft operating system :

brainly.com/question/30680922

#SPJ11

Casey was able to narrow the bug down to one area of code, and even provided some test cases for you to work with to get started. The two accounts in `testSomeUsersThatWork()` are working as expected and saving successfully. The three accounts in `testSomeUsersThatFail()` should be saving, but they are not, which is why they incorrectly return false right now. This is a problem with the code that handles saving the accounts in the database.

To fix it, you should look at the code in the `save()` function, which is called by both `testSomeUsersThatWork()` and `testSomeUsersThatFail()`. Specifically, you should look at how the accounts are being saved in the database and try to identify the problem with the code. Once you have identified the problem, you can then modify the code to fix it and verify that both `testSomeUsersThatWork()` and `testSomeUsersThatFail()` are now working correctly.

Know more about database here:

https://brainly.com/question/30634903

#SPJ11

The option that is not an example of identifying protocols that are needed to support hardware and software requirements of applications that will use the network is e) an application will have drop-down menu choices.

Protocols are the set of rules, procedures, and data formats that two or more entities (devices) use to communicate over a network. The protocol used on a network should match the requirements of the application that is using the network. Identifying protocols that support the hardware and software requirements of the application is a crucial step to ensure network connectivity.

Therefore, among the given options, e) an application will have drop-down menu choices is not an example of identifying protocols that are needed to support hardware and software requirements of applications that will use the network. It is a feature that is used for user interface design.

Learn more about computer networking and network protocols:https://brainly.com/question/14672166

#SPJ11

Your question is incomplete but probably the complete question is :

Which of the following is not an example of identifying protocols that are needed to support hardware and software requirements of applications that will use the network?

a. an application will use HTTP over TCP/IP

b. an application will run on an IBM mainframe and so the network will require SNA traffic

c. an application will need a gateway to translate SNA traffic into TCP/IP protocols

d. an application will use SPX/IPX with a Novell file server

e. an application will have drop down menu choices

Answer: The correct answer is d. baseline.

hope this helps you!

The best placement of devices on the network to protect the servers from unauthorized access is to put the web server inside the screened subnet and put the database server inside the screened subnet.
Firewalls are used to create a screened subnet to protect the servers from unauthorized access. The web server needs to be accessible to internet users and must communicate with the database server to retrieve product, customer, and order information. Therefore, the two best placements of devices on the network to best protect the servers are:

The reasons behind these placements are:

Learn more about web server visit:

https://brainly.com/question/30745749

#SPJ11

We have that, the manufacture of video game consoles involves multiple steps and processes, such as the following:

Video game console manufacturing involves multiple steps and processes, including design, prototyping, testing, production, and distribution. Here are some of the key steps involved:

Design: The initial step in creating a video game console is the design process. Designing a video game console is a challenging and complex process, with many factors to consider, including hardware, software, and user interface.

Prototyping: After the design stage, a prototype of the video game console is created. This prototype is used to test the console's hardware and software, identify any issues, and refine the design.

Testing – Once the prototype has been created, it is extensively tested to ensure it meets required standards of quality and performance. This testing process involves running the console through a series of tests to identify any failures and make any necessary adjustments.

Production: After the testing phase, the console is ready for mass production. This involves setting up a production line to manufacture the consoles and ensuring that the components are assembled and tested to required standards.

Distribution: Once the consoles are manufactured, they are packaged and prepared for distribution. This involves shipping the consoles to retailers and distributors, who then sell them to consumers.

See more information on video game creation at: https://brainly.com/question/908343

#SPJ11

Java program that simulates 10 thousand throws of two dice, if the result of each throw is the same, it is saved for the final statistics.

import java.io.*;

import java.math.*;

public class Main {

public static void main(String args[]) {

 int dice1;

 int dice2;

 int dicevalue[];

 int times;

 dicevalue = new int[6];

 for (times=1;times<=10000;times++) {

  dice1 = (int) Math.floor(Math.random()*6)+1;

  dice2 = (int) Math.floor(Math.random()*6)+1;

  if (dice1==dice2) {

   switch (dice1) {

   case 1:

    dicevalue[0] = dicevalue[0]+1;break;

   case 2:

    dicevalue[1] = dicevalue[1]+1;break;

   case 3:

    dicevalue[2] = dicevalue[2]+1;break;

   case 4:

    dicevalue[3] = dicevalue[3]+1;break;

   case 5:

    dicevalue[4] = dicevalue[4]+1;break;

   case 6:

    dicevalue[5] = dicevalue[5]+1;break;}}}

 for (times=1;times<=6;times++) {

  System.out.println("You rolled set of "+times+" "+dicevalue[times-1]+" times");}}}

For more information on java random class see: https://brainly.com/question/18187751

#SPJ11

Answer:

The device will probably overheat. *

Explanation:

The continual input of power will cause the laptop to heat up, and later, when he unplugs it, it will cool down. This cycle of warming and cooling will probably damage the battery as well as other parts.

* however, this being said, most devices these days have firmware to stop them from overcharging, plus batteries have improved greatly, so there is probably not too much harm in leaving a laptop plugged in

1. The student incorrectly listed the frequency table for the provided string. 2. The student left out instructions on how to handle ties in the frequency table. 3. The student failed to describe how to give binary codes to characters in the Huffman tree.

3. The student did not explain how to assign binary codes to the Huffman tree's characters. 4. The student left out the last step of utilising the created Huffman tree to encode the string. In total, the student's attempt to construct a Huffman tree had four errors. These omissions include failing to provide the proper frequency table, failing to address how ties should be handled, failing to describe how to assign binary codes to characters, and failing to bring up the string's final encoding phase. The two lowest frequency characters are combined to form a new node, and this process is repeated until only one root node remains, creating a Huffman tree. Characters are given binary codes based on the route taken from the root to the leaf node. The encoded text is then created by replacing each character in the Huffman tree with its appropriate binary code.

learn more about frequency table here:

https://brainly.com/question/28931302

#SPJ4

The vulnerability scanning method that uses only available information to hypothesize the status of the vulnerability is a. Non-credentialed vulnerability scans.

This type of vulnerability scan works by remotely scanning the systems to identify vulnerabilities. These scans don't need to authenticate into the systems, and thus they're often called unauthenticated scans. Non-credentialed scans are usually used in the first phase of the vulnerability management program.

Credentialed vulnerability scans: This type of vulnerability scan works by remotely logging into the systems and scanning them to identify vulnerabilities. These scans need to authenticate into the systems to scan it, and thus they're often called authenticated scans. Credentialed scans are usually used in the second phase of the vulnerability management program.

Intrusive vulnerability scans: Intrusive vulnerability scans actively test the systems to identify vulnerabilities. These scans have a higher risk of crashing the systems, and thus they're often called active scans. Intrusive scans are usually used in the third phase of the vulnerability management program.

Non-intrusive vulnerability scans: Non-intrusive vulnerability scans work by passively testing the systems to identify vulnerabilities. These scans don't have a risk of crashing the systems, and thus they're often called passive scans. Non-intrusive scans are usually used in the first phase of the vulnerability management program.

Learn more about  Non-credentialed vulnerability scans:https://brainly.com/question/30164649

#SPJ11

The correct option is option E. The semi-structured data warehouse is difficult to query in the traditional way. It is a disadvantage because it can make it harder to retrieve information that you need quickly.

A semi-structured data warehouse is one where the data is organized into hierarchies or trees, with some of the data being unstructured and some of it being semi-structured. Option E) The semi-structured data warehouse is a popular choice for organizations that are looking to store large amounts of data.

Learn more about semi-structured visit:

https://brainly.com/question/30247942

#SPJ11

Researchers have created the term "convergent media" to describe the technological advancements and communication traditions that have emerged as a result of the multifunctionality of many new media devices.

Convergent media refers to the integration of different types of media, such as text, audio, video, and images, into a single device or platform. This integration has enabled new forms of communication and interaction, such as social networking, streaming media, and online gaming, that were not previously possible.

Convergent media devices, such as smartphones and tablets, have become increasingly popular and have transformed the way people communicate, consume media, and interact with each other. These devices allow users to access a wide range of media and services from a single platform, and they have blurred the lines between traditional media categories, such as television, radio, and print.

Overall, the term "convergent media" is used to describe the ways in which technology and communication have converged, and how this convergence has created new opportunities and challenges for individuals and society as a whole.

You can learn more about convergent media at

https://brainly.com/question/25784756

#SPJ11

The second essential element for diversion programs, as suggested by Steadman and Associates, is swift and certain sanctions. Swift sanctions refer to prompt and consistent consequences for violating rules, and certain sanctions refer to predictable outcomes for any violation.

According to Steadman and Associates, there are two essential elements necessary for diversion programs. One is an aggressive linkage to an array of community services and the other is a continuous relationship between the offender and the community services provided. An array of community services is crucial for diversion programs, but the aggressive linkage to these services is critical for their effectiveness.

Furthermore, the goal of diversion programs is to prevent people from getting further involved in the criminal justice system diversion programs redirect people from criminal justice involvement to social service participation in hopes of preventing future crime.

Steadman and Associates' belief that aggressive linkage to an array of community services is one of the two essential elements necessary for diversion programs is correct. A continuous relationship between the offender and the community services provided is the other essential element.

To learn more about the criminal justice system click here:

https://brainly.com/question/7207817

#SPJ11

RPA (Robotic Process Automation) is a technology that enables organizations to automate routine tasks that would otherwise be performed manually. This technology has been in use for the past 10+ years and its adoption is now rapidly increasing as organizations move towards AI (Artificial Intelligence).

RPA is a strong building block on the journey towards AI as it allows organizations to move to AI faster because processes must be automated first before AI can be implemented. Furthermore, RPA also enables organizations to capture data which is essential for AI to work. It is a natural progression from initiatives such as ERPs, outsourcing, and Lean Six Sigma. The adoption of RPA is quickly becoming ubiquitous and almost all organizations are only at the start of their RPA journey. However, employees and employers should not be too concerned about its impact on jobs as there will not be overnight changes in the workplace.

Rather, RPA provides an opportunity to learn additional skills that can help to further enhance and improve processes. In short, RPA is an entry point to machine learning, a standalone offering and part of Blockchain, and is a blended workforce that is a combination of humans and bots, which automates all human tasks as organizations move to adopting AI.

To learn more about Technology ;

https://brainly.com/question/29579978

#SPJ11

The percent error in the first reading is 3.54%.

Here's the answer to your question:

We have two values; the first one is the value that we measured with a possible mistake, and the second one is the true value that we should have gotten if there were no mistakes.

The error is the difference between the two values. Hence, the percent error in a measurement is the ratio of the error in the measurement to the measurement itself, expressed as a percent.

In this problem, we have 2450 MB as the memory remaining that is measured with possible errors. The true value should have been 2540 MB.

The difference between the two values is: [tex]2540 - 2450 = 90 MB[/tex]

The percent error in the first reading is:

[tex]PE = \frac{Error} {True Value} * 100[/tex]

[tex]= \frac{90}{2540} * 100PE\\=3.54%[/tex]

Thus, the percent error in the first reading is 3.54%.

Learn more about percent error here:

brainly.com/question/28771966

#SPJ11

Answer:it would be 3.5

Explanation:because you take the the error over the correct multiply 100 and that’s your number

The correct answer is b) Minisha is a member of the Domain Admins group in both organizations because to accomplish the task of configuring Active Directory across two locations, Minisha must be a member of the Domain Admins group in both organizations.

This group is responsible for managing the Active Directory Domain Services, creating and managing user accounts, and assigning users to security groups.

Answer option a) Minisha is a member of the Enterprise Admins group in both organizations is incorrect, as this group only has control over the entire forest, and is not necessary for Minisha to configure Active Directory across two locations.

Answer option c) Minisha has run the following command: Get-ADForest | select SchemaMaster,DomainNamingMaster is incorrect, as this command does not grant Minisha any permission to configure Active Directory across two locations.

Answer option d) Minisha has run the following command: Set-ADDomainMode –Identity domainX.com -DomainMode Windows2012R2Domain is incorrect, as this command does not grant Minisha any permission to configure Active Directory across two locations.

You can learn more about Active Directory at: brainly.com/question/14469917

#SPJ11

Answer: D. client-server

The given statement "In an entity-relationship model, entities are restricted to things that can be represented by a single table". This statement is true because it is method of representation.

An entity-relationship model is a method for graphically representing the relationships between different entities in a database or information system.

The ER model's purpose is to help database developers to recognize the relationships between various entities and create databases that follow the rules.

An entity is a person, location, event, concept, or object about which data can be stored. Relationships depict how entities are related to one another. Attributes are characteristics or features of an entity.

When creating an ER diagram, entities are represented by rectangles, attributes by ovals, and relationships by lines connecting the entities. In summary, entities are the building blocks of an ER model.

Entities in an ER model are restricted to things that can be represented by a single table. This is because a single table can only represent one type of entity. The ER model's main purpose is to reduce data redundancy and make data retrieval more efficient. If an entity can be represented by a single table, there would be no need to divide it into multiple tables.

Learn more about entities here:

https://brainly.com/question/14986536

#SPJ11

Option C) Clearance and settlement services provided by the broker-dealer qualify under Section 28(e) safe harbor provisions for soft-dollar compensation.

Section 28(e) of the Securities Exchange Act of 1934 provides a safe harbor provision for investment advisers to receive soft-dollar compensation. Soft-dollar compensation is the payment of commissions to a broker-dealer in exchange for services other than the execution of securities trades, such as research, market data, or other services that can assist the investment adviser in making investment decisions.

Clearance and settlement services provided by a broker-dealer fall under the definition of "brokerage and related services" and qualify for safe harbor provisions under Section 28(e) of the Securities Exchange Act of 1934. Therefore, investment advisers can pay for these services with soft-dollar compensation.

The other options listed do not qualify for soft-dollar compensation under Section 28(e). Reimbursement for travel expenses, providing access to a computerized accounting system, and rent-free use of unused office space is not considered brokerage and related services and do not assist the investment adviser in making investment decisions.

Learn more about the regulatory framework for soft-dollar compensation:https://brainly.com/question/26626764

#SPJ11

The question is incomplete but probably the complete question is

Which of the following qualifies under Section 28(e) safe harbor provisions for soft-dollar compensation?

A)Reimbursement for travel expenses incurred to attend a seminar on the latest compliance trends for registered investment advisers.

B)Providing access to the broker-dealer's computerized accounting system, allowing the investment adviser to prepare its financial statements.

C)Clearance and settlement services provided by the broker-dealer.

D)Rent-free use of unused space in the broker-dealer's office.

New Media refers to digital and networked information and communication technologies that began emerging in the later half of the twentieth century. The correct option is D.

Learn more about technologies here: https://brainly.com/question/7788080

#SPJ11

The correct option is to convert totalPennies to dimes, nickels, and pennies, finding the maximum number of dimes, then nickels, then pennies.

Given int totalPennies, int numDimes, int numNickels, and int numPennies.

We have to convert totalPennies to dimes, nickels, and pennies, finding the maximum number of dimes, then nickels, then pennies. The number of pennies in the totalPennies variable will be divided by 10, and the quotient will be the number of dimes. The number of pennies in the totalPennies variable will be divided by 5, and the quotient will be the number of nickels. The number of pennies in the totalPennies variable will be subtracted from the totalPennies variable after multiplying the dimes and nickels by their respective value in pennies, and the result will be the number of pennies.

int totalPennies; int numDimes; int numNickels; int numPennies; cin >> totalPennies; numDimes = totalPennies / 10; numNickels = (totalPennies % 10) / 5; numPennies = (totalPennies % 10) % 5; cout << "Dimes: " << numDimes << endl; cout << "Nickels: " << numNickels << endl; cout << "Pennies: " << numPennies << endl;

Therefore, the code to perform the required operation is:

int totalPennies;int numDimes;int numNickels;int numPennies;cin >> totalPennies;numDimes = totalPennies / 10;numNickels = (totalPennies % 10) / 5;numPennies = (totalPennies % 10) % 5;cout << "Dimes: " << numDimes << endl;cout << "Nickels: " << numNickels << endl;cout << "Pennies: " << numPennies << endl;

Learn more about Conversion factor here:

https://brainly.com/question/97386

#SPJ11

The customer relationship management application that provides analysis of customer data is the analytical CRM. The correct answer is b.

Learn more about Analytical CRM here: https://brainly.com/question/15278271

#SPJ11

Yes, if both Host A and Host B send TCP segments to the same port number on Host C, the segments will be delivered to the same socket because they both have the same destination IP address and port number.

In TCP/IP, a socket is identified by a unique combination of the source IP address, source port number, destination IP address, and destination port number. When a TCP segment arrives at a host, the destination port number is used to determine which socket the segment should be delivered to. If multiple segments with the same destination port number arrive at the host, they will all be delivered to the same socket.

Therefore, in the scenario described, both TCP segments from Host A and Host B will have the same destination IP address and port number, and hence will be delivered to the same socket on Host C. The socket on Host C will be responsible for processing the data received from both Host A and Host B.

You can learn more about socket at

https://brainly.com/question/30227182

#SPJ11