Yes, it is possible for a colony to exhibit ampicillin resistance but not fluorescence. This can occur due to differences in the mechanisms of antibiotic resistance and fluorescence.
Antibiotic resistance is a phenomenon in which bacteria become resistant to antibiotics that were previously effective in killing them. This occurs due to genetic mutations that alter the target site of the antibiotic or prevent the antibiotic from entering the bacterial cell. In the case of ampicillin, bacteria may become resistant by producing an enzyme called beta-lactamase, which cleaves the beta-lactam ring of the ampicillin molecule, rendering it inactive.
Fluorescence, on the other hand, is a property of some molecules to emit light when exposed to a specific wavelength of light. In the laboratory, fluorescence can be used as a diagnostic tool to identify bacterial colonies. Some bacteria contain fluorescent proteins that are naturally produced by the bacteria, while others can be genetically modified to express a fluorescent protein.
Therefore, it is possible for a colony to exhibit ampicillin resistance but not fluorescence if the resistance mechanism does not affect the ability of the bacteria to produce or express fluorescent proteins. Similarly, it is also possible for a colony to exhibit fluorescence but not ampicillin resistance if the mechanism responsible for fluorescence does not affect the target site of the antibiotic or the ability of the antibiotic to enter the bacterial cell.
Here you can learn more about antibiotic resistance
https://brainly.com/question/9565922#
#SPJ11
If 40. 0 g of hci react with an excess of magnesium metal, what is the theoretical yield of hydrogen?.
If 40. 0 g of HCl reacts with an excess of magnesium metal, the theoretical yield of hydrogen is 2.218 g .
Hydrochloric acid (HCl) is a strong, highly corrosive acid that is commonly used in a variety of industrial and laboratory applications. It is a clear, colorless solution that has a pungent, irritating odor. HCl is highly soluble in water and forms an aqueous solution that has a pH of about 1.
The reaction between hydrochloric acid (HCl) and magnesium metal can be represented by the following equation:
HCl(aq) + Mg(s) -> MgCl2(aq) + H2(g)
The theoretical yield of hydrogen can be calculated by using the stoichiometry of the reaction. If 40.0 g of HCl reacts with an excess of magnesium metal, the number of moles of HCl can be calculated as:
n = mass / molar mass = 40.0 g / 36.5 g/mol = 1.097 mol
The stoichiometry of the reaction tells us that one mole of HCl will produce one mole of hydrogen gas. Therefore, the theoretical yield of hydrogen would be:
n = 1.097 mol * 1 mol/mol = 1.097 mol
The mass of 1.097 moles of hydrogen gas can be calculated as:
mass = n * molar mass = 1.097 mol * 2.016 g/mol = 2.218 g
Therefore, If 40. 0 g of HCl reacts with an excess of magnesium metal, the theoretical yield of hydrogen is 2.218 g
To know more about HCl refer to:
brainly.com/question/30233723
#SPJ4
calculate the freezing point of a solution of 40.0 g benzoic acid, c7h6o2, dissolved in 800. g of benzene, c6h6. k f for benzene is 5.10°c/m and the freezing point is 5.50°c for benzene.
The freezing point of a solution of 40.0 g benzoic acid is 5.245 °C.
The freezing point depression of a solution can be calculated using the equation ΔTf = Kf × molality, where ΔTf is the change in the freezing point, Kf is the molal freezing point depression constant, and molality is the concentration of the solute in mol/kg of solvent.
The molality of the solution can be calculated by dividing the mass of the solute (40.0 g of benzoic acid) by the mass of the solvent (800.0 g of benzene) and converting the result to moles.
Molality = (40.0 g of benzoic acid) / (800.0 g of benzene) = 0.05 mol/kg
Next, we can calculate the change in the freezing point using the equation ΔTf = Kf × molality
ΔTf = (5.10 °C/m) × (0.05 mol/kg) = 0.255 °C
Finally, we can calculate the freezing point of the solution by subtracting the change in the freezing point from the freezing point of the pure solvent.
Freezing point of solution = (Freezing point of pure solvent) - ΔTf = (5.50 °C) - (0.255 °C) = 5.245 °C
The freezing point of the solution of 40.0 g of benzoic acid dissolved in 800.0 g of benzene is 5.245 °C.
Learn more about benzoic acid:
brainly.com/question/15394817
#SPJ4
Which i the mot effective way to decreae water pollution?
A: Pa law controlling the number of fih that can be caught in the ocean
B: Pa law regulating what factorie can emit into the air and pour out onto the ground
C: Convert foret into farmland
D: Convert wild habitat into parkland and zoo
Pa law regulating what factories can emit into the air and pour out onto the ground is the mot effective way to decreae water pollution.
What are the different methods used to decrease water pollution?
There are several methods used to decrease water pollution. One method is to regulate industrial and agricultural practices, such as implementing laws that control the amount of pollutants that can be discharged into waterways. Another method is to improve sewage treatment processes, so that waste is properly treated before being released into the environment. Additionally, implementing best management practices in agriculture, such as reducing fertilizer and pesticide use, can help decrease water pollution. The use of green infrastructure, such as rain gardens, can also help reduce runoff and prevent pollutants from entering waterways. Educating the public and promoting sustainable practices, such as reducing single-use plastic usage, can also help decrease water pollution. Each method has its own strengths and limitations, and a combination of approaches may be needed to effectively decrease water pollution.
To know more about water pollution visit: https://brainly.com/question/30490520
#SPJ4
Suppose the following chemical reaction can take place in this mixture:
4HCI(g) + O2(g) → 2H2O(g)+2C2(g)
Of which reactant are there the most initial moles? enter its chemical formula:
In the given chemical reaction, 4HCI (g) reacts with O2 (g) to form 2H2O (g) and 2Cl2 (g). If we consider 4HCI as the reactant with the most initial moles, then its chemical formula is HCl.
HCl, or hydrogen chloride, is a colorless and highly reactive gas that is widely used in various industrial processes. It is commonly used as a starting material for the production of other chemicals such as PVC and Teflon. In this reaction, HCl moles reacts with O2 to form H2O and Cl2. H2O, or water, is a common and essential compound reaction that is widely used in various industries, including agriculture, pharmaceuticals, and personal care products. Cl2, or chlorine, is a highly reactive gas that is widely used in the production of various moles chemicals, such as bleach and other disinfectants. In conclusion, the chemical reaction moles between 4HCI and O2 can result in the formation of water and chlorine, which have significant industrial applications. The most number of initial moles are of HCL
Learn more about moles here:
https://brainly.com/question/15356425
#SPJ4
at stp (standard temperature and pressure), 0.280 l of a gas weighs 0.400 g. calculate the molar mass of the gas.
At STP, the molar mass of gas with mass 0.400 g is equals to the 32.2580 grams per mole.
We have a gas in STP ( standard temperature and pressure) condition. Our goal in this problem is to calculate the molar mass of the gas.
Volume of gas, V = 0.280 litre
Mass of gas = 0.409 g
STP is nothing but Standard Temperature and Pressure. The standard temperature is 273K the standard pressure is 1 atm pressure.
We know, the ideal gas equation is represented as PV = nRT
where, P ---> pressure
V --> Volume of gas
R--> gas constant
T --> temperature
n --> number of moles of gas
First, we determine the number of moles:
so, n = PV/RT
plugging all known values in above formula to determine the value of n,
=> n = (1 atm × 0.280 L) /( R × 273 K)
Also, Value of gas constant, R = 0.0821 atm L/K/mol
=> n= (1 atm × 0.280 L) /(0.0821 atm L/K/mol × 273 K)
=> n = 0.0124 mol
Molar mass of substance, M = mass of substance/number of moles
Thus, molar mass of gas = 0.400g/0.0124mol
Hence, the molar mass of gas is 32.2580 g/mol.
To learn more about molar mass, refer:
https://brainly.com/question/837939
#SPJ4
Choose the statement that does NOT pertain to amino acids.
a. The groups composing an amino acid are located around a central alpha-carbon.
b. All amino acids must contain a nitrogen-based molecule and a carboxylic acid.
c. The R-side group will determine the overall chemical properties of an individual amino acid.
d. Amino acids always contain a sulfur atom in their R-side group.
A hydrogen atom, R group, and a carbon atom are all connected by bonds. The amino acid side chain refers to this R group, which differs from one amino acid to another. Among the twenty biologically significant amino acids, five have unique side chains (R). Thus, option D is correct.
What are the main structural components of amino acids?Each amino acid contains a carbon atom at its core, known as the two to which four groups are attached: a hydrogen atom, a carboxylic acid group, an amine group, and an R-group, also known as a variable group or side chain.
The alpha carbon in every amino acid is joined to a hydrogen atom, a carboxyl group, and an amino group. These protein monomers differences from one another are governed by the R group, which alternates between amino acids.
Therefore, Amino acids always contain a sulphur atom in their R-side group.
Learn more about amino acids here:
https://brainly.com/question/28409615
#SPJ4
This property of water helps make it the universal solvent: _____.
Responses
A solvencysolvency
B polarity
Answer: B: Polarity
Explanation:
how much heat is needed to change 18 g of water at 20∘c into water vapor at the boiling point?
40.22 kJ of heat are required to convert 18 grammes of water at 20°C into water vapour at the boiling point.
The boiling point of a substance is the temperature at which a liquid's vapour pressure matches the pressure around it and the liquid condenses into a vapour. Different liquids will boil at various temperatures and pressures. The heat required to change a substance from a liquid to a gas is called the enthalpy of vaporization, or ∆Hvap. The amount of heat required to vaporize a given amount of a substance can be calculated using the equation:
q = m x ∆Hvap
here q is heat required, m is mass of the substance, and ∆Hvap is enthalpy of vaporization.
For water, the enthalpy of vaporization at its boiling point (100°C) is 40.7 kJ/mol. To convert this to kJ/g, we can divide by the molar mass of water, which is 18.015 g/mol:
= ∆Hvap
= 40.7 kJ/mol / 18.015 g/mol
= 2.268 kJ/g
So, to vaporize 18 g of water at 20°C, we need:
= q
= 18 g x 2.268 kJ/g
= 40.22 kJ
This is the amount of heat that must be added to the water to change it from a liquid at 20°C to a gas at the boiling point (100°C).
To know more about boiling point please refer:
https://brainly.com/question/2153588
#SPJ4
How many electrons are in the Lewis structure of PO43 -?
In the Lewis structure of PO43- there are a total of 32 valence electrons.
What is the straightforward meaning of valence?
The property of an element that influences how many additional atoms of that element can combine is known as valence, sometimes spelled valency.
The phrase, which first appeared in 1868, is used to represent both the general capacity of combination of an element as well as the corresponding numerical number.
What distinguishes valency electrons from valence electrons?
The ability of an atom to establish covalent bonds with other atoms is known as valency, which is different from valence electron.
For bonding and sharing one or more protons with another atom, valence electrons, on the other hand, are the quantity of electrons required for a compound's outer shell to be complete.
Learn more about valence electrons
brainly.com/question/28977387
#SPJ4
How many sp2-hybridized carbon atoms are in the structure shown below? CH2=CHOCH2CH=CH2
А 5 B 4 C 2
D 0 E 3
sp2-hybridized carbon atoms in the structure CH2=CHOCH2CH=CH2 are B) 4.
How many sp2-hybridized carbon atoms are in the structure ?There are 4 sp2-hybridized carbon atoms in the structure shown. The hybridization of carbon atoms can be determined by counting the number of sigma bonds and lone pairs of electrons attached to each carbon atom. In the structure shown, each sp2-hybridized carbon atom is bonded to 3 other atoms (2 other carbons and 1 hydrogen or another element) and has no lone pairs of electrons. Therefore, there are 4 sp2-hybridized carbon atoms in the structure.
Carbon atom is sp2 hybridized when bonding takes place between 1 s-orbital with two p orbitals.
To know more about sp2-hybridization , refer
https://brainly.com/question/17426049
#SPJ4
naphthalene is a primary component of mothballs; they readily sublime at room temperature. the heat of sublimation for naphthalene, c10h8, is 72.9 kj/mol. how much energy is needed to sublime 15.0 grams of naphthalene? (molar mass
The energy required to sublime 15 grams of Naphthalene is 8.54 kJ.
To find the amount of energy needed to sublime 15.0 g of naphthalene, we need to first determine the number of moles of naphthalene, and then multiply that by the heat of sublimation.
First, we need to find the number of moles of naphthalene:
15.0 g / 128.17 g/mol = 0.117 mol
Next, we need to multiply the number of moles by the heat of sublimation:
0.117 mol * 72.9 kJ/mol = 8.54 kJ
So, the energy needed to sublime 15.0 g of naphthalene is 8.54 kJ.
Find more about Sublimation here: https://brainly.com/question/28626755
#SPJ4
Two important ingredients for baking bread are yeast and flour. To make a loaf of bread of at most 30 servings, maintain a yeast to flour ratio of 1:200. If you're making a loaf of more than 30 servings, use a ratio of 1:180.
To make a loaf of bread with a maximum of 30 servings, you should use a yeast to flour ratio of 1:200.
If you're making a loaf of more than 30 servings, use a ratio of 1:180. This ratio ensures that you have enough yeast to properly rise the dough, while preventing the bread from becoming too dense.
If the ratio is too high, the bread will not rise as much as desired, resulting in a denser loaf. If the ratio is too low, the bread will not have enough structure and will be too soft.
Learn more about chemical reactions during cooking
https://brainly.com/question/21493831
#SPJ4
determine the hybridization state of each carbon atom in nemotin
Nemotin is a diterpenoid natural substance with a carbocyclic ring system as its main structural component.
Analyzing the bonding configurations of the carbon atoms in nemotin allows one to assess the degree of hybridization.
Usually, sp hybridization occurs between carbon atoms that are bound to one or two other atoms and form a linear or angular shape. Typically, sp3 hybridization occurs in tetrahedral structures made of three bonded carbon atoms. Typically, sp2 hybridization occurs when four carbon atoms are linked together to form a trigonal planar or tetrahedral structure.
Since the carbons in the carbocyclic ring structure of nemotin are connected to four other atoms and arrange themselves in a planar manner, they are most likely sp2 hybridized. Depending on their bonding configurations, the carbons on the side chains connected to the ring system may be either sp3 or sp2 hybridized.
Learn more about carbocyclic ring:
brainly.com/question/19755726
#SPJ4
what is the atomic number for an element whose mass number is 152, which contains 89 neutrons per atom?
The aggregate mass of the protons and neutrons in a nucleus is represented by the letter A, which is also the symbol for protons and neutrons.
What are the parameter for the atomic number?The sum of the number of neutrons and the number of masses, or A, is equal to the number of protons, or the number of atoms we represented by Z, plus the number of masses.
The number of protons in an atom's nucleus or the number of electrons in an electrically neutral atom is the atomic number of that atom. Proton number Equals Atomic number
To determine the atomic mass of a single element's atom, multiply the protons' and neutrons' masses by two.
Therefore, The mass number of an element is determined by the sum of the protons and neutrons: Protons and neutrons make up mass.
Learn more about atomic number here:
https://brainly.com/question/16858932
#SPJ4
For centuries, fishermen have used shark liver oil to treat a variety of ailments, including general weakness, wounds, and inflammation of the respiratory and gastrointenstinal tracts. In fact, it is an ingredient in the hemorrhoid cream Preparation H. In addition to chemicals such as vitamins A and D, omega-3 fatty acids, and triglycerides, shark liver oil contains approximately 14% 2,6,10,14-tetramethylpentadecane, also known as pristane.
Write the molar mass of pristane?
The molar mass of pristane is 204.4 g/mol.
To calculate the molar mass of a compound, you need to use the chemical formula to determine the number of atoms of each element in the compound.
Then, you can use the atomic weights of each element to calculate the total molar mass. For example, if the compound is water (H2O), the molar mass would be 2 (atomic weight of hydrogen) + 16 (atomic weight of oxygen) = 18 g/mol.
Molar mass is the mass of one mole of any substance. It is defined as the amount of a substance that contains a certain number of molecules or atoms.
Learn more about the molar mass
https://brainly.com/question/21334167
#SPJ4
How do you determine the number of signals in the NMR spectrum?
The number of signals these molecules release in a 1H NMR spectrum can be calculated using the number of distinct hydrogens on one side of a symmetry plane.
What is hydrogen, exactly?Natural gas, sometimes known as methane, is a filthy alternative to hydrogen. It is thought to account about 75% of universe's mass and is the most common chemical element. On Earth, there are a lot of hydrogen atoms in water, plants, animals, plus, of course, us.
How are hydrogens referred to?The two additional hydrogen isotopes are Deuterium and Tritium, whereas the common synthesis gas H is known as proton. Out of all the elements, only hydrogen's isotopes have been given unique names. The two have their purposes.
To know more about hydrogen visit:
https://brainly.com/question/28937951
#SPJ4
Which functional group(s) is not present in the molecule below?
a. Haloalkane
b. Ketone
c. Ether
d. Ester
All the functional groups except ether are present in the molecule.
Which functional group is not present in molecules?A functional group is a group of atoms in a molecule with distinguished chemical properties, any way of the other atoms in the molecule. The atoms in a functional group are associated with each other and to the rest of the molecule by covalent bonds. However, sodium is an element, a metal, it is not a functional group.
Some of the main functional groups in biological molecules involve hydroxyl, methyl, carbonyl, carboxyl, amino, phosphate, and sulfhydryl groups. These groups play an important role in the genesis of molecules like DNA, proteins, carbohydrates, and lipids.
So we can conclude that The functional groups perform a vital activity in producing molecules like proteins, DNA, lipids, and carbohydrates.
Learn more about the functional groups here: https://brainly.com/question/10058230
#SPJ1
The reaction 2no(g) cl2(g) was performed and the following data obtained under conditions of constant [cl2] ? Is the following mechanism consistent with the data? Explain.NO(g) + Cl2(g) -> NOCl2(g)NOCl2(g) + NO(g) -> 2 NOCl(g)
Yes, the following mechanism consistent with the data. As based on the graph , we can conclude that the reaction order is second order reaction with respect to NO.
The chemical reaction is :
2NO + Cl₂ ----> 2NOCl
The mechanism :
NO + Cl₂ ⇄ NOCl₂ (fast)
NOCl + NO ----> NOCl (slow)
The Rate = k [NOCl₂] [NO]
k [NO] [ Cl₂ ] = k' [NOCl₂ ]
[NOCl₂ ] = K/K' [NO] [ Cl₂ ]
The rate = k K/K' [NO] [ Cl₂ ] [NO]
This confirms that the reaction order is second order with respect to the [NO]. But not the Cl₂.
To learn more about rate here
https://brainly.com/question/14808240
#SPJ4
Select the reasons that the molecule formed by 2 hydrogen atoms (H2) is stable. (choose more than 1)
It is held together by a covalent bond
The octet rule is not satisfied
It has no net charge
It is held together by an ionic bond
It has no unpaired electrons
The molecule formed by 2 hydrogen atoms (H2) is stable because: It is held together by a covalent bond, It has no unpaired electrons, It has no net charge.
It is held together by a covalent bond, which is a type of chemical bond formed by the sharing of electrons between atoms.
It has no unpaired electrons, meaning that each hydrogen atom has a full complement of electrons, resulting in a more stable molecule.
It has no net charge, meaning that the positive and negative charges within the molecule are balanced, resulting in a neutral overall charge.
Hydrogen gas (H2) is a simple molecule composed of two hydrogen atoms bonded together by a covalent bond. A covalent bond is a chemical bond that forms when two atoms share electrons in order to fill their valence shells and become more stable. In the case of H2, each hydrogen atom contributes one electron to the bond, and the electrons are shared between the two atoms.
Learn more about unpaired electrons here:
https://brainly.com/question/29656941
#SPJ4
you need a 35% alcohol solution. on hand, you have a 240 ml of a 25% alcohol mixture. you also have 75% alcohol mixture. how much of the 75% mixture will you need to add to obtain the desired solution?
You will need 60ml of the 75% solution to add to the 240ml of a 25% alcohol mixture.
A solution is a specific kind of homogenous mixture made up of two or more components that is used in chemistry. A solute is a substance that has been dissolved in a solvent, which is the other substance in the mixture. The solvent particles will pull the solute particles apart and surround them if the attractive forces between the solvent and solute particles are stronger than the attractive forces holding the solute particles together. The particles of the solute that are enclosed by the solid solute subsequently disperse into the solution.
Now m be the amount of the 75% mixture and you have 240ml of the 25% alcohol mixture.
75% m + 25%(240) = 35%(m + 240)
75/100m + 25/100 × 240 = 35/100m + 35/100 × 240
divide all by 5 to get,
15/20m + 5/20 × 240 = 7/20m + 7/20 × 240
multiply by 20 to get
15m + 1200 = 7m + 1680
Then it will reduces to,
8m = 480
m = 60ml.
To learn more about alcohol mixture visit,
https://brainly.com/question/14777564
#SPJ4
Which set of three quantum numbers does not specify an orbital in the hydrogen atom? Please I need a step by step explanation.
A- n =2; l =1; ml =-1
B- n =3; l =2; ml =2
C- n =2; l =0; ml =0
D- n =3; l =4; ml =0
The values of the three quantum numbers are n = 3, l = 4, and ml = 0.
What is the quantum ?Quantum is a term used to describe the smallest possible unit of a physical quantity, such as energy. It is the fundamental building block of all matter and is the basis of modern quantum mechanics. Quantum mechanics is a branch of physics that deals with the behavior of matter and energy on the atomic and subatomic level. In quantum mechanics, particles of matter and energy are described by wave-like equations, and the behavior of these particles is unpredictable and usually counterintuitive.
The correct answer is D- n =3; l =4; ml =0.
The three quantum numbers specify an orbital in the hydrogen atom are the principal quantum number (n), the angular momentum quantum number (l), and the magnetic quantum number (ml). The values of these three quantum numbers must satisfy the following conditions:
1. The principal quantum number (n) must be a positive integer: n = 1, 2, 3, 4, etc.
2. The angular momentum quantum number (l) must be an integer between 0 and n-1: l = 0, 1, 2, ..., n-1.
3. The magnetic quantum number (ml) must be an integer between -l and +l: ml = -l, -l+1, -l+2, ..., 0, ..., +l-2, +l-1, +l.
In the case of option D, the values of the three quantum numbers are n = 3, l = 4, and ml = 0. This does not satisfy the condition for l, which must be an integer between 0 and n-1. Therefore, option D is the correct answer.
To learn more about quantum
https://brainly.com/question/25786066
#SPJ4
Silicon dioxide, also known as silica, is an oxide of silicon. It is most commonly found in nature as quartz and in various living organisms. Given 1.5 mol of SiCl2 and 1.8 mol of H2O, answer the following questions using the balanced chemical equation below:
SiCl4(g) + 2 H2O(g) → SiO2(s) + 4 HCl(g)
A. The limiting reactant is and the reactant in excess is
B. The amount of SiO2 produced is based on
C. The theoretical yield of SiO2 produced is
Since SiCl2 is the limiting reactant, the amount of SiO2 produced is limited by the amount of SiCl2 present. Therefore, the theoretical yield of SiO2 is equal to 1.5 moles, which is the same amount of SiCl2 used in the reaction.
What is the moles?Moles are small burrowing mammals that belong to the Talpidae family. They are found in the Northern Hemisphere and can be identified by their claws, distinct snouts, and velvety fur. Moles primarily feed on insects, earthworms, and other small invertebrates, and they use their long claws to dig extensive networks of tunnels beneath the surface of the ground. Moles are usually solitary animals but may live in small family groups. They have poor eyesight but an excellent sense of smell, and they are active both day and night.
To learn more about moles
https://brainly.com/question/24191825
#SPJ4
When Alyssa did Part A of the experiment, she observed the solutionoutside the tubing turn black. What might have happened?
The solution outside the tubing might have reacted with the air, causing oxidation and turning black.
When Alyssa performed Part A of the experiment, she observed that the solution outside the tubing turned black. This could be due to a process known as oxidation.
Oxidation is a chemical reaction that occurs when a substance reacts with oxygen in the air. The reaction causes the substance to lose electrons, which can cause a change in color, among other things.
In this case, the solution outside the tubing may have reacted with oxygen in the air, causing it to turn black. This reaction could have been facilitated by heat, light, or other factors that can increase the rate of oxidation. Additionally, the composition of the solution and the presence of any catalysts could have also contributed to the reaction.
To know more about oxidation here:
https://brainly.com/question/29947859#
#SPJ11
of the following, which is the strongest base
The strongest base among the ones listed is NaOH.The conjugate acid NH3 is the least powerful in the group.
which is the H2N-conjugate acid.. H2N- will therefore be the most powerful basis. The existence of a lone pair of electrons on the nitrogen atom, which are available for the bond formation with Lewis acid, is what gives amine its basic nature. due to the +I action of the CH 3 NH 2 group.
Strong Bases List (8):
LiOH (lithium hydroxide) (lithium hydroxide)
NaOH (sodium hydroxide) (sodium hydroxide)
KOH (potassium hydroxide) (potassium hydroxide)
Ca(OH)2 (calcium hydroxide) (calcium hydroxide)
RbOH (rubidium hydroxide) (rubidium hydroxide)
Sr(OH)2 (strontium hydroxide) (strontium hydroxide)
CsOH (cesium hydroxide) (cesium hydroxide)
Ba(OH)2 (barium hydroxide) (barium hydroxide)
Learn more about NaOH Here :
https://brainly.com/question/29854404
# SPJ4
4. Matter can be defined as anything that A. has weight. B. has mass and volume. C. is uniform throughout. D. exhibits both chemical and physical properties.
which of these is the correct equation for the dissociation of water?
The dissociation of water is H2O + H2O <==> H3O+ + OH–
Dissociation of water:
The water molecule dissociate into the hydroxyl ion and hydrogen ion. The hydrogen ion immediately protonate the other water molecule and form the hydronium ion.
Chemical equation:
H2O + H2O <==> H3O+ + OH–
The equilibrium constant of self ionization of water is given below:
Kw= [H3O+][OH-]
[H3O+] is the concentration of hydronium ion while [OH-] is the concentration of hydroxyl ion.
Kw is called ionic product of water. The value of Kw is 1.0 × 10∧-14 at 25 °C.
The pure water consist of equal concentration of hydroxyl and hydrogen ions. In order to determine the molarity of both ions square root of ionic product (Kw) is taken.
[OH-]=[H+]= 1.0 × 10∧-7 M
In case of acidic solution concentration f hydrogen ions are greater than hydroxide ions. For example,
HCl when dissociate into water gives H+ and Cl-. The H+ ions increases in solution. The equilibrium is this given by water.
H2O ⇆ H+ + OH-
Reaction is forced to wards left. As a result concentration of hydroxide ions decreases.
Hence above given is a correct answer.
To know more about Dissociation of water follow link
https://brainly.com/question/13378385
#SPJ4
The term "polyatomic ion" tells us that we are working with a _______ particle made of two or more atoms, joined to form a unit.
Responses
A ionicionic
B covalentcovalent
C chargedcharged
The term "polyatomic ion" tells us that we are working with a covalent covalent particle made of two or more atoms, joined to form a unit. Therefore, option B is correct.
What is polyatomic ion ?Polyatomic ions are ions that have more than one atom. Nitrate ion, NO3-, for example, has one nitrogen atom and three oxygen atoms. A polyatomic ion's atoms are usually covalently bonded to one another and thus remain together as a single, charged unit.
Polyatomic ions are ions composed of two or more atoms joined by covalent bonds but with a net electron deficiency or surplus, resulting in an overall charge on the group.
Thus, option B is correct.
To learn more about the polyatomic ion, follow the link;
https://brainly.com/question/12852496
#SPJ1
Bromine is a red liquid at 25°C. Its density is 3.12 g/cm3. What is the volume of 28.1 g
of liquid bromine?
A) 87.7 cm3 B) 0.111 cm3 . C) 9.01 cm
D) 28.1 cm3
E) None of the above
Option C) 9.01 cm is the correct answer
What is volume ?
Volume is a measure of the amount of space occupied by an object or a substance. It is a scalar quantity and is expressed in units such as cubic meters, cubic centimeters, liters, or gallons. Volume is an important physical quantity that is used to describe the size of objects and the amount of a substance contained within a container.
In mathematics, volume is often used to describe the amount of space enclosed by a three-dimensional object, such as a cube, sphere, or cylinder. The formula for the volume of a three-dimensional object depends on its shape, but common formulas include the volume of a cube (V = s^3), the volume of a sphere (V = 4/3 π r^3), and the volume of a cylinder (V = π r^2 h).
Density = mass / volume
Density = 3.12 g/ cm3
mass = 28.1 grams
Volume = mass / density
Volume = 28.1 grams / 3.12 grams / cm3
To know more about Volume , click the link below ;
https://brainly.com/question/463363
#SPJ4
rank the relative nucleophilicity of halide ions in dimethyl sulfoxide solution.
In dimethyl sulfoxide (DMSO) solution, the relative nucleophilicity of halide ions can be ranked as follows:
Iodide (I-)
Bromide (Br-)
Chloride (Cl-)
Fluoride (F-)
This ranking is based on the fact that, in general, nucleophilicity increases as the basicity of the species increases. In DMSO, iodide is the most basic halide ion and has the highest nucleophilicity, followed by bromide, chloride, and fluoride in that order. Fluoride is the least nucleophilic due to its small size and high electronegativity, which make it less likely to participate in nucleophilic reactions. Nucleophilicity is a measure of the tendency of a nucleophile (an electron-rich species) to participate in a chemical reaction. It is a measure of the reactivity of a nucleophile towards an electrophile (an electron-poor species). A highly nucleophilic species has a high affinity for electrons and is therefore more likely to react with an electrophile.
Learn more about nucleophilicity:
brainly.com/question/29563504
#SPJ4
given that 0 k is the lowest possible temperature that can be attained theoretically, which temperatures listed can be achieved for a sample of matter? select all that apply.
-300.0°C 0°C 300.0°F 0°F
The temperatures that can be achieved for a sample of matter are:
-300.0°C
0°C
0 K (or 0°C) is the lowest possible temperature that can be attained theoretically, and -300.0°C is a temperature that can be achieved for a sample of matter. 300.0°F and 0°F are temperatures in the Fahrenheit scale, and are not applicable in this context as the temperatures given are in the Celsius scale. All the temperatures listed can be achieved for a sample of matter except 0 k which is the lowest possible temperature that can be attained theoretically and has no practical meaning in terms of a temperature scale. 0°F and 300.0°F can be achieved as well as they are both on the Fahrenheit temperature scale where 0°F is the freezing point of water and 300.0°F is a high temperature.
Learn more about temperatures here:
https://brainly.com/question/6325043
#SPJ4