Answer:
Explanation:
I don't think so. Think about it. To compress the volume by a factor of 2 it takes 956 Joules.
Now you come along and you want to get the pressure for 1/12 of the volume. It's going to take a huge pressure to do that.
I would suggest that you have to use a modified form of the formula.
PV = 956
You need to compress the volume by 1/6
P(V/6) = 956
6 * PV/6 = 6 * 956
PV = 5736 J
Why did I only take 1/6? Because. 956 represents the pressure needed for 1/2 the volume. You need to multiply 1/2 * 1/6 to get 1/12
Which of the following examples BEST describes the life characteristic of respiration?
A) A cheetah races across the plain.
B) Starfish cells divide and multiply as it gets larger.
C) Humans eliminate some wastes through urine and feces.
D) Humans breathe in oxygen and release carbon dioxide.
Answer:
D if I'm incorrect then sorry.
Explanation:
The force of gravity on an object gives the object its _______.
A. mass
B. kilogram
C. acceleration of gravity
D. weight
Answer:
Weight
Explanation:
The force of gravity on a an object gives the object its weight.
A rope is wrapped around a pulley many times. The pulley can be modeled as a solid disk of radius R and mass M, and a mass mA hangs vertically from the pulley. The mass is released from rest. show answer Incorrect Answer 25% Part (a) What is the magnitude of the tangential acceleration of the hanging mass?
The magnitude of the tangential acceleration of the hanging mass is 2mg/MR
Tangential acceleration of the hanging massThe tangential acceleration of the hanging mass around the pulley is determined from the principle of conservation of angular momentum as shown below;
τ = Iα
Where;
I is the moment of inertiaα is the angular velocity[tex]\alpha = \frac{\tau}{I} \\\\\alpha = \frac{mgR}{3/2MR^2} \\\\\alpha = \frac{2mgR}{3MR^2} \\\\\alpha = \frac{2mg}{3MR}[/tex]
Where;
m is the hanging massM is the mass of solid diskThe tangential acceleration is calculated as follows;
[tex]a = \alpha R\\\\a = \frac{2mg}{3MR} \times R\\\\a = \frac{2mg}{3M}[/tex]
Thus, the magnitude of the tangential acceleration of the hanging mass is 2mg/MR
Learn more about tangential acceleration here: https://brainly.com/question/11476496
Which process describes the warm ocean that transfers heat to the air above it?
O conduction
O convection
O reflection
O radiation
Answer:
convection is the answer
The process that describes the warm ocean that transfers heat to the air above it is known as Convection. Thus, the correct option for this question is B.
What are some characteristics of heat?Some characteristics of heat are as follows:
It has no mass, shape, color, odor, volume, and weight.It is one of the invisible forms of energy.It stimulates the presence of warmth.It gets remarkably transferred from one body to another.This form of energy has the capacity to flow in each and every direction.The process of convection transfers heat with the help of the migration of a fluid (liquid or gas) between areas of different temperatures. It is an approach that signifies the transfer of heat between two bodies by involving currents of moving gas or fluid.
Therefore, convection is the process that describes the warm ocean that transfers heat to the air above it. Thus, the correct option for this question is B.
To learn more about Convection, refer to the link:
https://brainly.com/question/9382711
#SPJ2
Which of the following would NOT cause acceleration?
A. an object falling towards the earth
B. the wind catching the sail of a sailboat
C. a car traveling at a constant velocity
D. a pitcher throwing a baseball
Calculate the average velocity of the cart for each fan speed. Round your answers to the nearest tenth. The cart with Low fan speed has an average velocity of cm/s. The cart with Medium fan speed has an average velocity of cm/s. The cart with High fan speed has an average velocity of cm/s.
A 4-column table with 3 rows. Column 1 has entries Elapsed time to finish line(s); Total distance (c m); Average velocity (c m/s). Column 2 is labeled Cart Speed (Low Fan Speed) (c m/s) with entries 7.4; 500; unknown. Column 3 is labeled Cart Speed (medium Fan Speed) (c m/s) with entries 6.4; 500; unknown. Column 4 is labeled Cart Speed (High Fan Speed) (c m/s) with entries 5.6; 500; unknown.
This is defined as the rate of change of position of an object with respect to time. The unit is metres per second(m/s).
Velocity = distance/ time
The velocity for column 1 = 500m/7.4s = 67.57m/s.
The velocity for column 2 = 500m/6.4s = 78.13m/s.
The velocity for column 3 = 500m/5.6s = 89.29m/s.
Read more about Velocity here https://brainly.com/question/6504879
Answer:
67.6
78.1
89.3
Explanation:
The SI unit for force is the _________.
A. mass
B. kilogram
C. newton
D. acceleration of gravity
E. weight
Answer:
Newton
Explanation:
The SI unit for force is the newton.
Answer:
The SI unit of kilogram is Newton. It is denoted by n
What is environmental?
Answer:
Environmental means relating to or caused by the surroundings in which someone lives or something exists. It protects against environmental hazards such as wind and sun. The form the human family takes is a response to environmental pressures.
Explanation:
I HOPE IT HELPS!!
THANX!!!
STAY SAFE!!!!
Predict the magnitude of the gravitational force....
Answer:
a=650.549
b=246.4819
c=38.5261
Explanation:
Place the following in order, from closest to furthest away:
A) The scattered disc; B) The Kuiper Belt; C) The Oort cloud
The order from closest to furthest away include the following:
The Kuiper BeltThe scattered discThe Oort cloud.What is Kuiper belt?This is the region which ends around 50 AU from the Sun and has the presence of the scattered disc in its outer surface.
The Oort cloud has a distance of between 2,000 and 10,000 thereby making it the farthest which is why the correct order is B, A and C.
Read more about Kuiper belt here https://brainly.com/question/3955749
Terry is walking down the street at 3 m/s. If he
has a mass of 70 kg, what is his momentum?
[tex]\text{Given that, mass m = 70 kg and velocity v = 3 m/s}\\\\\text{Momentum,}~ p = mv = 70 \times 3 = 210~ kg ~ms^{-1}[/tex]
An unbalanced force acting on an object results in ______.
A. inertia
B. friction
C. acceleration
D. faster
E. slower
Answer:
friction
Explanation:
What are the essential components of successfully competing in the field events:
Power, technique, and timing
Technique, flexibility, and speed
Power, speed, and strength
None of the above
Answer:
Power, technique, and timing
Explanation:
I took the test, hope it helps, dont forget to rate ⭐⭐⭐⭐
Answer:
A
Explanation:
I took the quiz
A student in the Biomechanics class has decided that she would like to make her arms
stronger. She has a mass of 63 kg, She chooses to complete some elbow flexion exercises
using a kettlebell. For this problem, consider the hand and forearm to be a single segment.
The distance from her elbow to her wrist is 22.86 cm.
The force from the kettlebell is applied to her hand, which is 30.48 cm from her elbow joint.
She knows that the moment arm of the elbow extensor muscles about the elbow axis is
Answer:
what is heat and transfer
Why was the government in giving support to addressing and researching the HIV epidemic ?
The United States uses only 10% of the world's energy.
True
False
Answer:
False
Explanation:
17%
the answer to your question is false
10 N
30 N
4 kg
what’s the net force & acceleration
Answer:
The question is not complete. Since force is a vector quantity we need to consider the direction of the two forces.
hence if they are acting opposite on the body . then the net force will be 30-10=20N20N
Acceleration=Force/mass
=20/4
=5m/s^2
Explanation:
23) What is the magnitude of the electric field intensity at a point where a proton experiences an
electrostatic force of magnitude 2.30 x 10-25 newton?
Answer: I am so sorry i hadn't learned this Yet~!
Explanation:
The ________ of an object is the same on the earth as it is on the moon.
A. mass
B. kilogram
C. newton
D. acceleration of gravity
E. weight
Answer:
mass
Explanation:
The mass of an object is the same on the earth as it is on the moon.
Mass always remains constant, it never changes with respect to place.
The magnetic field perpendicular to a single wire loop of diameter 10.0 cm decreases from 0.50 T to zero. The wire is made of copper and has a diameter of 2.0 mm and length 1.0 cm. How much charge moves through the wire while the field is changing?
I know how to do the calculations, but can someone please explain what is the 10cm diameter and 2mm diameter? Why is there one wire and two diameters? I understand this problem mathematically but not conceptually.
Hi there!
We can begin by using Lenz's Law:
[tex]\epsilon = -N\frac{d\Phi _B}{dt}[/tex]
N = Number of Loops
Ф = Magnetic Flux (Wb)
t = time (s)
Also, we can rewrite this as:
[tex]\epsilon = -NA\frac{dB}{dt}[/tex]
A = Area (m²)
Since the area is constant, we can take it out of the derivative.
This is a single wire loop, so N = 1.
Now, we can develop an expression for the induced emf.
We can begin by solving for the area:
[tex]A = \pi r^2 \\\\d = r/2 r = 0.05cm \\\\A = \pi (0.05^2) = 0.007854 m^2[/tex]
We can also express dB/dt as:
[tex]\frac{dB}{dt} = \frac{\Delta B}{t} = \frac{0-0.5}{t} = \frac{-0.5}{t}[/tex]
Now, we can create an equation.
[tex]\epsilon = -(1)(0.007854)\frac{-0.5}{t} = \frac{0.003927}{t}[/tex]
To solve the system, we must now develop an expression for current given an emf and resistance.
Begin by calculating the resistance of the copper wire:
[tex]R = \frac{\rho L}{A}[/tex]
ρ = Resistivity of copper (1.72 * 10⁻⁸ Ωm)
L = Length of wire (0.01 m)
A = cross section area (m²)
Solve:
[tex]R = \frac{(1.72*10^{-8})(0.01)}{\pi (0.001^2)} = 5.475 * 10^{-5} \Omega m[/tex]
Now, we can use the following relation (Ohm's Law):
[tex]\epsilon = iR\\\\\epsilon = \frac{Q}{t}R[/tex]
*Since current is equivalent to Q/t.
Plug in the value of R and set the two equations equal to each other.
[tex]\frac{Q}{t}(5.475 * 10^{-5}) = \frac{0.003927}{t}[/tex]
Cancel out 't'.
[tex]Q (5.475 * 10^{-5}) = 0.003927 \\\\Q = \frac{0.003927}{5.475*10^{-5}} = \boxed{71.73 C}[/tex]
define what is physics
In my own words, I would say that physics is an area of science that seeks to explain and understand the fundamental nature of the dynamics of objects, essentially defining how objects can interact, in space and in time.
2. A tennis ball machine launches balls horizontally with an initial speed of 5.3 m/s, from a height of 1.2 m.
a) What will the time of flight be for a tennis ball launched by the ball machine? (3)
b) What will the range of the tennis ball be? (2)
c) What will be the final velocity of the ball with which it reaches the ground? (3)
(a) The time of flight be for a tennis ball launched by the ball machine is 0.19 s.
(b) The range of the tennis ball be is 1.01 m.
(c) The final velocity of the ball with which it reaches the ground is 7.16 m/s.
Time of flight of tennis ballThe time of flight of the tennis ball is calculated as follows;
h = vt + ¹/₂gt²
1.2 = 5.3t + 0.5(9.8)t²
1.2 = 5.3t + 4.9t²
4.9t² + 5.3t - 1.2 = 0
a = 4.9, b = 5.3, c = 1.2
solve using quadratic formula
t = 0.19 s
Thus, the time of flight be for a tennis ball launched by the ball machine is 0.19 s.
Range of the tennis ballThe range of the tennis ball is calculated as follows;
R = vt
R = 5.3 x 0.19
R = 1.01 m
Final velocity of the ballThe final velocity of the ball with which it reaches the ground is calculated as follows;
vf = vo + gt
vf = 5.3 + 9.8(0.19)
vf = 7.16 m/s
Learn more about time of flight here: https://brainly.com/question/4441382
A capacitor of cylindrical shape as shown in the red outline, few cm long carries a uniformly distributed charge of 7.2 uC per meter of length. By constructing a suitable Gaussian surface around the wire, Find the magnitude and direction of the electric field at points
a)5.5m
b)2.5m
perpendicular from the center of the wire.
(a) The magnitude of the electric field at point 5.5m is 2.35 x 10⁴ N/C.
(b) The magnitude of the electric field at point 2.5m is 5.18 x 10⁴ N/C.
Electric field at a point on the Gaussian surface
The magnitude of the electric field at a point on the cylindrical Gaussian surface is calculated as follows;
E = λ/2πε₀r
where;
λ is linear charge densityε₀ is permitivity of free spacer is the position of the chargeAt a distance of 5.5 m[tex]E = \frac{\lambda}{2\pi \varepsilon _0 r} \\\\E = \frac{7.2 \times 10^{-6}}{2\pi \times 8.85 \times 10^{-12} \times 5.5} \\\\E = 2.35 \times 10^4 \ N/C[/tex]
At a distance of 2.5 m[tex]E = \frac{\lambda}{2\pi \varepsilon _0 r} \\\\E = \frac{7.2 \times 10^{-6}}{2\pi \times 8.85 \times 10^{-12} \times 2.5} \\\\E = 5.18 \times 10^4 \ N/C[/tex]
Thus, the magnitude of the electric field at points of 5.5m is 2.35 x 10⁴ N/C, and the magnitude of the electric field at points of 2.5m is 5.18 x 10⁴ N/C.
Learn more about electric field here: https://brainly.com/question/14372859
Suppose a grower sprays (2.2x10^1) kg of water at 0 °C onto a fruit tree of mass 180 kg. How much heat is released by the water when it freezes?
There is no temperature change which drives heat flow, thus no heat will be released by the water.
Heat released by the water when it freezesThe heat released by the water when it freezes is calculated as follows;
Q = mcΔФ
where;
m is mass of waterc is specific heat capacity of waterΔФ is change in temperature = Фf - ФiInitial temperature of water, Фi = 0 °C
when water freezes, the final temperature, Фf = 0 °C
Q = 22 x 4200 x (0 - 0)
Q = 0
Since there is no temperature change which drives heat flow, thus no heat will be released by the water.
Learn more about heat flow here: https://brainly.com/question/14437874
What’s the weight of a box w/ a mass of 150kg on earth?
[tex]\text{Weight ,} W = mg = 150 \times 9.8 =1470N[/tex]
Explanation:
f=ma
where force is weight. we know that a is the acceleration of gravity which is -9.8 m/s^2
so f is
-1471.5 N
Who is the father of the humans?
Answer:
Adam (Arabic:, romanized:dam) is said to be the first human person on Earth, as well as the first prophet (Arabic:, nab) of Islam. Muslims see Adam's role as the father of the human race with veneration.
Explanation:
Answer:
Adam is the name given to the first person in Genesis 1-5. Aside from being the name of the first man, Adam is also used as a pronoun in the Bible, both individually as "a human" and collectively as "mankind."
Explanation:
7. A 2.0 kg block, starting from rest, is pushed by a
constant force along a frictionless track. The
position of the block as a function of time is
recorded in the data above. The final momentum
of the block is
(A) 0.8 kgm/s
(B) 1.2 kgm/s
(C) 1.6 kgm/s
(D) 3.2 kgm/s
Answer:
(A) 0.8 kgm/s
Explanation:
because of the even ground it would only slow down
Why would it be impractical to wire a home with a circuit in which all loads were connected in series.
For residences, series circuits are impracticable. Parallel circuits are practical because each appliance is controlled by its own switch, which prevents the other appliances from being turned off. A) The appliances are all turned on. The conductor wire is carrying a considerable quantity of current (arrow).
Describe gravitational force in your own words. Which two factors affect the gravitational force between two objects?
Answer:
Gravitational force is the force that attracts objects towards each other. Two factors that affect the gravitational force between objects are the mass of the two objects and the distance between
Explanation:
Gravity is what pulls us towards the Earth if we were to jump into the air, so it is the force that pulls things towards other things. The bigger the objects are the more gravity they have, so a planet has more gravity than say, an apple. Distance between objects also makes their gravity change, so the Earth's pull on the moon is different than the Earth's pull on the sun.
Hopefully this helps- let me know if you have any questions!
Describe gravitational force in your own words. Which two factors affect the gravitational force between two objects?
Answer :-Gravitational Force :- It is the attractive force between the two body having some mass.Example of gravitational force :- attraction between the human and earth . earth pulls the body towards it with the help of this This force helps the celestial bodies to revolve in there orbits Factors effecting Gravitational force:- Mass :- gravitational force directly proportional on the masses of the body between which it is acting [tex]gravitational \: force ∝m{ \tiny1}m{ \tiny2}[/tex]Distance between the masses :- Gravitational force is inversely proportional to the square of the distance between the masses [tex]gravitational \: force∝ \frac{1}{ {r}^{2} } [/tex]Formula of the Gravitational force :-[tex]F = \frac{G m{ \tiny1}m{ \tiny2} }{ {r}^{2} } [/tex]
where
F is gravitational force G is gravitational constant ( universal constant ) m 1 is mass of first body m2 is mass of second body r is the distance between the two bodiesA spring-loaded ballistic cart measuring 0.68 kg is in contact with a second 0.80 kg
cart. The carts are initially at rest on a level surface. The spring is released and the
lighter cart is observed to move at +0.52 m/s afterward. What is the velocity of the
other cart?
Answer:
wait in comments.................