Answer: hello some part of your question is missing below is the missing part
In an experiment to determine the % of ascorbic acid in Vitamin C Tablets by Titration with Potassium Bromate,
answer:
Oxidation half reaction of Vitamin C
Explanation:
The solution will turn cloudy dark purple even after reaching endpoint when allowed to settle with time. because of the Oxidation half reaction of Vitamin C. also during the Titration process few drops of starch solution will be added to help determine the endpoint of the experiment .
Which of these increases the friction of someone walking on the floor?
Answer:
.This is because gravity pulls down harder on the heavier one, which increases its friction with the floor
Mark me as Branliest
how has society influenced our opinions on lithium mining
Answer:
LIBs have had a huge impact on our society. They enabled modern portable electronics such as laptops and mobile phones. And they are now enabling clean and low-carbon transport, be it via electric cars or even flying taxis, and grid-scale storage of renewable energy
Explanation:
Write a balanced equation for the combination reaction described, using the smallest possible integer coefficients. When methane (CH4) combines with carbon tetrachloride , dichloromethane (CH2Cl2) is formed.
Answer:
C H₄ + C Cl₄ = 2 (C H₂ Cl₂)
Molybdenum (Mo) crystallizes with a body-centered cubic lattice and has an atomic radius of 136.1 pm.
a. Calculate the density of molybdenum in g/cm^3. Show all work. Include units with all numbers and show how units cancel.
b. Calculate the density of molybdenum in g/cm^3
How many atoms are in 2.32 mol2.32 mol of copper?
Answer:
since 1 mole = 6.022×10^23
hence in 2.32 moles no. of atoms= 6.022×10^23 × 2.32
=
13.97104 ×10^23
plz mark it as brainliest
What is the mass of 2.7 L of water?
What is the pH of a 1.7 × 10⁻⁴ M HClO₄ solution?
You have a sample of gold that contains 0.2 moles of gold (Au). How many gold atoms are present in the sample. HINT: Gold atoms represents the number of particles."
1.20 x 10^23 atoms
3.3 x 10^-25 atoms
1.01 x 10^-3 moles
BEST ANSWER IS
have a great summer
1.01 x 10^-3 moles
n = 0.20 mol
Required:N
Solution:N = n × 6.02 × 10²³ atoms/mol
N = 0.2 mol × 6.02 × 10²³ atoms/mol
N = 1.20 × 10²³ atoms
Therefore, there are 1.20 × 10²³ gold atoms in 0.2 mol of a gold sample.
#ILoveChemistry
#ILoveYouShaina
A TLC plate showed 2 spots with Rf values of 0.25 and 0.26. The plate was removed from the developing chamber, the residual solvent was allowed to evaporate from the plate, and then the plate was returned to the developing chamber. What would you expect to see after the second development was complete
Answer:
See explanation
Explanation:
TLC is a chromatographic method in which the solute is spotted on a plate and the plate is placed in an air tight chamber containing a solvent. The solvent is maintained below the level of the spot. The capillary movement of the solvent through the plate achieves the required separation.
If two spots have Rf values of 0.25 and 0.26 respectively and then the plate was removed from the developing chamber, subsequently, the residual solvent was allowed to evaporate from the plate, and then the plate was returned to the developing chamber.
It will be observed after the second development is complete that the new Rf values will be 0.50 and 0.52 respectively. It will just be as though the second chromatogram picked up from where the first chromatogram stopped.
What mass of octane (in g) is required to produce 8210 kJ of heat?
Answer:
184.8 g
Explanation:
Step 1: Write the balanced thermochemical equation
C₈H₁₈(l) + 25/2 O₂(g) ⇒ 8 CO₂(g) + 9 H₂O(g) ΔH°rxn = -5074.1 kJ
Step 2: Calculate the moles of octane required to produce 8210 kJ of heat
According to the thermochemical equation, 5074.1 kJ of heat are released per mole of octane consumed.
-8210 kJ × 1 mol C₈H₁₈/(-5074.1 kJ) = 1.618 mol
Step 3: Calculate the mass corresponding to 1.618 moles of octane
The molar mass of C₈H₁₈ is 114.23 g/mol.
1.618 mol × 114.23 g/mol = 184.8 g
1mol produces=5074.1KJ heat .
Moles produce 8210 KJ heat :-
8210/5074.1=1.62molMolar mass of Octane :-
8(12)+18=96+18=114g/molMass of Octane=
1.62(114)=184.7gArrange the forms of electromagnetic radiation in order of decreasing energy (from highest energy to lowest energy). You are currently in a ranking module. Turn off browse mode or quick nav, Tab to move, Space or Enter to pick up, Tab to move items between bins, Arrow Keys to change the order of items, Space or Enter to drop.
highest energy lowest energy
radio waves
x rays
gamma rays
infrared
microwaves
ultraviolet
visible
Answer:
gamma rays > X-rays > ultraviolet radiation > visible light > infrared > radio waves.
Explanation:
Electromagnetic waves are those waves that require no material medium for propagation. They can travel through space and they all move at the speed of light.
Electromagnetic waves are composed of both electric and magnetic fields which are mutually at right angles to each other.
The order of decreasing energy of electromagnetic waves is;
gamma rays > X-rays > ultraviolet radiation > visible light > infrared > radio waves.
explain why seeing a gas doesn not always indicate that there was a chemical change.
Which of the following is the correct Lewis dot structure of c4?
Answer: B
Explanation:
Identify each of the following sets of quantum numbers as allowed or not allowed in the hydrogen atom.
a. n=3 , l= 2 , ml =2
b. n=4 , l= 3 , ml =4
c. n=0 , l= 0 , mb =0
d. n=2 , l= 1 , mb =1
Answer:
See explanation.
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to firstly recall the electron configuration of hydrogen:
[tex]1s^1[/tex]
To realize that the principal quantum number is 1, the angular is 0 as well as the magnetic one; therefore we infer that all the given n's are not allowed, just l=0 is allowed as well as ml=0 yet the rest, are not allowed.
Best regards!
Bacteria and archaea carry out the process of nitrogen fixation, which reduces atmospheric nitrogen, N2, to the biologically useful form NH3, also called ammonia. The nitrogenase complex consists of two proteins, reductase and nitrogenase, which catalyze the reactions of nitrogen fixation. Match each structural feature or function with the corresponding component of the nitrogenase complex.
a. also called the molybdenum—iron protein, or the MoFe protein
b. transfers electrons from a donor, such as frrredoxin, to the other component.
c. Homodimer
d. Heterotetramer
1. Reductase
2. Nitrogenase
Answer:
a. Nitrogenase
b. Reductase
c. Reductase
d. Nitrogenase
Explanation:
Reductase is a enzyme which promotes chemical reduction for a substance. It is also known as iron protein as iron is main component in reductase. Nitrogenase are molybdenum because they sulfur as co factor
HELP ASAP!! if given the following balanced equation, circle one of the following calculations that shows how to correctly determine the amount of CO2 gas (in moles) that will be produced if you start with 6 moles of calcium carbonate CaCO3
Answer:
The answer is B.
Explanation:
A cell is placed into a 1 millimolar solution of substance X. Over time you witness the concentration of X inside the cell increase to 5 millimolar. Describes the movement of substance X?
Answer:
X is moving into the cell by active transport
Explanation:
According to Oxford dictionary;active transport refers to ''the movement of ions or molecules across a cell membrane into a region of higher concentration, assisted by enzymes and requiring energy''.
Since the concentration of X is higher inside the cell than it is outside the cell, energy must be required in order to move substance X across the cell membrane against existing concentration gradient. This process is called active transport.
HELP ME PLZ AND THANKS I WILL MARK YOU AS BRAINLIEST!!!
Answer:
i think formula is PV=K?
Explanation:
write the formula
sodium ion
Answer:
NA+
Explanation:
NA+
hope help
it's NA+
Write the formula of sodium ion.
[tex]\implies {\blue {\boxed {\boxed {\purple {\sf { {Na}^{ + } }}}}}}[/tex]
[tex]\bold{ \green{ \star{ \orange{Mystique35}}}}⋆[/tex]
which is a characteristic of oxygen
Answer:
Characteristics of oxygen are as follows:
In normal conditions oxygen is a colourless, odourless and insipid gas.It condensates in a light blue liquid.Oxygen is part of a small group of gasses literally paramagnetic and it's the most paramagnetic of all.Liquid oxygen is also slightly paramagnetic.An aqueous solution was created by placing 0.018 g of NaCl into a 50 mL volumetric flask and diluting to volume with deionized water. (Because the amount of solute is small, you may assume that the volume & density of the solution is equal to the volume & density of the solvent where appropriate.)Find the concentration in terms of the following units. Report your answers without scientific notation.Only input numbers. Your answers must be expressed to the correct number of significant figures. Any values less than one must have a zero in front of the decimal (e.g. 0.01 not .01)Molarity (M): Molality (m):Mole fraction of NaCl (X):Mass % of NaCl:
Answer:
Molarity: 6.2x10⁻³M NaCl
Molality: 6.2x10⁻³m NaCl
Mole Fraction: 1.1x10⁻⁴
Mass% NaCl: 0.036% (m/m NaCl)
Explanation:
Molarity -Moles NaCl / L-
Moles NaCl -Molar mass: 58.44g/mol-
0.018g * (1mol/58.44g) = 0.000308 moles NaCl
Liters water:
50mL * (1L/1000mL) = 0.050L
M = 0.000308 moles NaCl / 0.050L
M = 6.2x10⁻³M NaClMolality -Moles NaCl / kg water-
Moles NaCl = 0.000308 moles NaCl
kg water = 50mL * (1g/mL) * (1kg/1000g) = 0.050kg
m = 0.000308 moles NaCl / 0.050kg
m = 6.2x10⁻³m NaClMole Fraction -Moles NaCl / Moles water+ Moles NaCl-
Moles water = 50g * (1mol/18.01g) = 2.776 moles
Moles fraction = 0.000308 moles NaCl / 0.000308 moles NaCl + 2.776moles water
Mole fraction = 1.1x10⁻⁴Mass Percent -Mass NaCl / Mass NaCl+Mass Water * 100
0.018g / 50g+0.018g * 100
0.036% (m/m NaCl)
Complete the following road map for converting volume of A to volume of B for a titration of aqueous solution A with aqueous solution B.
a. multiply by the molarity of B
b. multiply by the moles of B per moles of A
c. divide by the molarity of B
d. multiply by the molarity of A
e. divide by the molarity of A
f. multiply by the moles of A per moles of B
1. volume A (L)
2. moles A
3. moles B
4. volume B (L)
Answer:
Explanation:
The solution of known concentration is expressed as molarity. Molarity is the mole fraction of solute (i.e. the dissolved substance) per liter of the solution, Molarity is also commonly called molar concentration.
Mathematically;
[tex]\mathtt{Molarity = \dfrac{moles \ of \ solute}{ liters \ of \ solution}}[/tex]
To copy and complete the road map from the given question, we have the following array:
Volume A (L)
↓
d. multiplied by the molarity of A
↓
moles A
↓
b. multiplied by the moles of B / moles of A
↓
moles B
↓
c. divided by the molarity of B
↓
volume B (L)
Name the following ketone:
A. 2,3,5,6-tetraethyl-4-octanal
B. 2,3,5,6-tetramethyl-4-octanone
C. 2,3,5,6-tetramethyl-4-octaketone
Answer:
it is b step by step
Explanation:
The naming of this compound is 2,3,5,6 tetramethyl-4-octane.
Hence, option (B) is correct answer.
What is Ketone ?
A ketone is functional group which contains the carbonyl group that is -C = O. The structure for ketone is R¹ - C = O - R² where R¹ and R² are alkyl group or aryl group.
How to naming a compound ?First we have to find the longest continuous carbon chain. Then identify and start naming the functional groups attached to the chain. Starting the numbering of a compound which is starting at the end nearest a group.Here we can see that the longest carbon chain is Octane. And the functional group is here ketone so suffix is -one. Now starting the number from the left hand side. We can see that on 2, 3,5,6 positions methyl group is attached in this chain. On 4th position ketone group is attached.
So the naming of the ketone is 2,3,5,6 tetramethyl-4-octane.
Thus, from above conclusion we can say that the naming of this compound is 2,3,5,6 tetramethyl-4-octane.
Hence, option (B) is correct answer.
Learn more about the Ketone function group here: https://brainly.com/question/27425066
#SPJ2
How would you prepare stable polymers from formaldehyde?
Answer:
The mechanical properties of urea formaldehyde resins may be improved by incorporating therein polyvinyl alcohol. The polyvinyl alcohol may be incorporated during pre-mixing, mid mixing, and/or post mixing of the resin components. Resins prepared using polyvinyl alcohol are particularly desirable in articles requiring improved mechanical strength and water resistance, as compared to similar resins prepared without the polyvinyl alcohol such as shingles.
Question 11
1 pts
A solution is formed by dissolving 45 grams of NH4Cl in
100 grams of H20 at 70°C. Which statement correctly
describes this solution?
O NH4Cl is the solute, and the solution is saturated.
O NH4Cl is the solute, and the solution is unsaturated.
o NH4Cl is the solvent, and the solution is unsaturated.
O NH4Cl is the solvent, and the solution is saturated.
< Previous
Answer:
NH4Cl is the solute, and the solution is unsaturated.
Explanation:
To create a saturated solution of ammonium chloride at 70°C, we need to dissolve 62 g of ammonium chloride in 100 g of water.
The question tells us that 45 grams of NH4Cl was dissolved in 100 grams of H20 at 70°C. This creates an unsaturated solution since the amount of solute present is less than the amount of solute that the NH4Cl solution can normally hold at 70°C.
Hence, NH4Cl is the solute, and the solution is unsaturated.
A tank at is filled with of sulfur tetrafluoride gas and of sulfur hexafluoride gas. You can assume both gases behave as ideal gases under these conditions. Calculate the mole fraction of each gas. Round each of your answers to significant digits.
The question is incomplete, the complete question is:
A 7.00 L tank at [tex]21.4^oC[/tex] is filled with 5.43 g of sulfur hexafluoride gas and 14.2 g of sulfur tetrafluoride gas. You can assume both gases behave as ideal gases under these conditions. Calculate the mole fraction and partial pressure of each gas. Round each of your answers to significant digits.
Answer: The mole fraction of sulfur hexafluoride is 0.221 and that of sulfur tetrafluoride is 0.779
Explanation:
The number of moles is defined as the ratio of the mass of a substance to its molar mass. The equation used is:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)
For sulfur hexafluoride:Given mass of sulfur hexafluoride = 5.43 g
Molar mass of sulfur hexafluoride = 146.06 g/mol
Putting values in equation 1, we get:
[tex]\text{Moles of sulfur hexafluoride}=\frac{5.43g}{146.06g/mol}=0.0372mol[/tex]
For sulfur tetrafluoride:Given mass of sulfur tetrafluoride = 14.2 g
Molar mass of sulfur tetrafluoride = 108.07 g/mol
Putting values in equation 1, we get:
[tex]\text{Moles of sulfur tetrafluoride }=\frac{14.2g}{108.07g/mol}=0.1314mol[/tex]
Total moles of gas in the tank = [0.0372+ 0.1314] mol = 0.1686 mol
Mole fraction is defined as the moles of a component present in the total moles of a solution. It is given by the equation:
[tex]\chi_A=\frac{n_A}{n_A+n_B}[/tex] .....(2)
where n is the number of moles
Putting values in equation 2, we get:
[tex]\chi_{SF_6}=\frac{0.0372}{0.1686}=0.221[/tex]
[tex]\chi_{SF_4}=\frac{0.1314}{0.1686}=0.779[/tex]
Hence, the mole fraction of sulfur hexafluoride is 0.221 and that of sulfur tetrafluoride is 0.779
¿Cómo se divide la tecnología?
de te
Answer:
còmo supòtànté insígídà pàtàtàk
If you keep adding sugar to water and there comes a point that you cannot dissolve any more sugar to it then this is called
Answer:
.
Explanation:
9) Give the set of four quantum numbers that could represent the extra electron added (using the Aufbau principle) to the neutral Ne atom.
10) Which 2nd period element has the most negative electron affinity? Why? Bonus questions
11) Which ionization process requires the most energy? Why?
A) Se(g) → Set(g) + e-
B) Set(g) Se2+(g) +
C) Br(g) → Brt(g) + e-
D) Brt(g) Br2+(g) + e-
12) Place the following in order of decreasing metallic character. Explain your reason.
P As K
Answer:
See explanation
Explanation:
9) If an extra electron is added to the neon atom, then the electronic configuration becomes; 1s2 2s2 2p6 3s1
This last electron has quantum numbers;
n=3, l=0, m=0 and s = +1/2
This is so because the 2s level is already filled so the extra electron must go into the 3s level. The orbital quantum number and the magnetic quantum number for the s orbital is zero.
10) Electron affinity is the energy released when one mole of gaseous atoms accept one mole of gaseous electrons to form one mole of gaseous ions having a negative charge.
In the second period, fluorine has the greatest electron affinity since electron affinity increases across the period. The noble gas, neon has an electron affinity of 0KJ/mol.
11) Ionization energy decreases down the group but increases across the period due to increase in the size of the nuclear charge and decrease in the distance between the nucleus and the outermost electron. Hence, the process; Br+(g) ---->Br2+(g) + e- has the greatest ionization energy. Recall that the second ionization is always higher than the first ionization energy.
12)The order of decreasing metallic character here is K> As> P. Even though As and P belong to the same group, we must note that metallic character increases down the group hence the order written above.
Describe what happens between the valence electrons in an Ionic Bond.
How is that different from a covalent bond?
Answer:
In an ionic bond, the elctrons are transferred. For example, NaCl has an ionic bond because Na loses an electron and the Cl atom gains the electron. However in a covalent bond, the electrons are shared equally. Covalent bonds usually occur between two nonmetals.
Explanation: