Answer:
salt, rocks, blah
Explanation:
Answer:
We call substances that dissolve in water soluble. Sugar and salt are examples of soluble substances. You'll need Transparent containers – test tubes or beakers. Water ( warm and cold ) Substances to try to dissolve eg. sugar, coffee, pepper, sand, flour, salt.Explanation:
Hope this helpsYou have decided to bake a cake. You mix all of your ingredients together to make a delicious chocolate cake. Then, you bake your cake at 350 degrees fahrenheit. You have to perform both a physical and a chemical change to bake a cake. What is the chemical change? Include at least 2 pieces of evidence or indicators to explain how you know it was a chemical change.
Answer:
A gas is evolved
The ingredients can not be recovered
Explanation:
A chemical change is one in which a new substance is formed and it is not easily reversible.
One major ingredient used in cake baking is the baking powder or baking soda.
Baking a cake can be viewed as a chemical change. This is because, when the baking powder or soda is added in the presence of yeast, carbon dioxide gas is evolved as tiny bubbles of gas which makes the cake light and fluffy. Heat is equally given off in the process. The baking powder and other cake ingredients can not be recovered, hence, we can conclusively assert that a chemical change has taken place.
Help me. I need help on these questions and i don’t understand
I will mark whoever gets it right most brainliest (25 point question)
What is the name of the ionic compound CaCN?
Hint: It's not Calcium Cyanamide
Answer: Calcium Cyanide?
Explanation:
23. A 54-gram sample of an unknown material has a volume equal to 20 cm'. Based on its density,
could the sample be aluminum? Explain.
Answer:
The density of aluminum is 2.7 g/cm³. Thus given sample is aluminum.
Explanation:
Given data:
Mass of sample = 54 g
Volume of sample = 20 cm³
Density of sample = ?
Is the sample is aluminum = ?
Solution:
We will calculate the density from given mass and volume.
d = m/v
d = density
m = mass
v = volume
d = 54 g/ 20cm³
d = 2.7 g/cm³
From literature it is known that the density of aluminum is 2.7 g/cm³. Thus given sample is aluminum.
Help with homework explain GRADE12 1-3 please
Answer:
1. a) 1.27 mol H₂SO₄
2. b) 19 g KCl
Explanation:
The grass method is an acronym for Given, Required, Application, Solution, Statement.
1. a) Given, 125g H₂SO₄; Required, find the moles H₂SO₄; Application, 125g x molar mass of H₂SO₄, Solution, [tex]125g H2SO4 * \frac{1molH2SO4}{98.08gH2SO4} = 1.274469molH2SO4[/tex] Statement, Round to the lowest number of significant figures to get 1.27 mol H₂SO₄;
2. b) I am only show the equation for this one, but it is basically the same as the previous one. The molar mass of KCl is 74.55 g/mol.
[tex]0.25molKCl*\frac{74.55gKCl}{1molKCl} = 18.6375 gKCl[/tex]
Round to the lowest number of significant figures which is two to get 19 g KCl.
For 3 the unit converter between moles and molecules is 6.022 x 10²³ molecules/mol.
Let me know if you need more help.
Why is it beneficial for chemists to understand as many periodic trends as they can?
Answer:
It can help identify elements quicker.
Explanation:
What type of solid contains particles that are jumbled and form no particular
pattern?
A. Crystalline
B. High-pressure
C. High-viscosity
D. Amorphous
Answer: D
Explanation:
Amorphous
Answer:D
Explanation:
took the apec test
which feature is created on the exterior of a volcano when it errupts
Answer: Crater and lava flow
Explanation:
How many atoms are in 0.075 mol of titanium?
O 4.5 x 1022
O 1.2 x 10-25
O 6.4 x 102
O 2.2 x 1024
Answer:
The answer is
4.5 × 10²²Explanation:
To find the number of atoms of titanium , given it's number of moles we use the formula
N = n × Lwhere n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question
n = 0.075 mol
We have
N = 0.075 × 6.02 × 10²³
We have the final answer as
4.5 × 10²²Hope this helps you
If the approximate density of 6.5 L of ethanol is 0.79 g/ mL, what is the mass in grams?
Answer:
The answer is 5135 gExplanation:
The mass of a substance when given the density and volume can be found by using the formula
mass = Density × volumeFrom the question
density = 0.79 g/mL
1 L = 1000 mL
6.5 L = 6500 mL
We have
mass = 0.79 × 6500
We have the final answer as
5135 gHope this helps you
Two students have been researching the atomic theory in preparation for their chemistry test. Melanie stated that Thomson's discovery revolutionized the understanding of an atom more than Rutherford. Josue disagreed with Melanie, he stated Rutherford's discovery revolutionized the understanding of an atom more than Thomson. Which student do you agree with?
Answer:
Josue
Explanation:
J.J Thompson proposed the plum pudding model of the atom. In his proposition, the atom is a sphere of positive charges into which negative charges were embedded. This model of the atom did not significantly contribute to our present day understanding of atomic structure.
On the other hand Ernest Rutherford laid out the foundation for a more accurate understanding of atomic structure in his nuclear model of the atom. According to Rutherford, the atom consists of a positively charged massive core called the nucleus around which electron move in orbits. His idea was akin to the solar system with the sun at it's core and planets moving around the sun in orbits.
This his idea of the nuclear theory was held as fundamentally correct by Neils Bohr's model of the atom. Hence, his nuclear theory of the atom was a significant milestone in our present day understanding of atomic structure.
what is the population of the study
Answer:
The study population is the subset of the target population available for study (e.g. schizophrenics in the researcher's town). The study sample is the sample chosen from the study population.
Explanation:
In research terminology the Population can be explain as a comprehensive group of individuals, institutions, objects and so forth with have a common characteristics that are the interest of a researcher. Any value which is identified or measured from the characteristics of entire population can be called as Parameter.
.
In what way is kinetic energy present in a solar oven
helllllllpppppp pleeeaaassseee
Answer:
The density of ice ice is lesser than that of water that's why ice floats on water. So hence, the answer is C
Answer:
Less than that of water
Explanation:
This explains why icebergs float on water. If it was greater than that of water icebergs would sink.
If this helped please consider marking me as brainliest.
How many joules are needed to melt 50 g of ice at 0°C?
Answer:
You need the Delta H fusion for water. Multiply that by 50 grams. Then multiply 50 g x 4.184 x 65 to get joules to raise water to 65 degrees. Add these values together to get total joules.
Explanation:
What location of an atom are protons,neutrons, and electrons found
Answer:
Nucleus is the answer of your question
Answer:
nucleus is your awnser
If velocity is positive, which would most likely yield a negative acceleration?
A final velocity that is faster than an initial velocity.
A time that is less than a half hour.
An initial velocity that is faster than a final velocity.
A time that is greater than a half hour.
Answer:
C. An intitial velocity that is faster than a final velocity.
Explanation:
taking the test rn but it makes sense because you'd have to slow down to get a lesser final velocity.
Answer:
C
Explanation:
#10- ill mark brainliest and give 5 stars if its correct
Answer:
#10 for?
Explanation:
A flask contains the liquids trichloromethane (chloroform) and water. They are separated using a separating funnel, which conclusion can be made from this observation alone?
A. Trichloromethane and water have different relative molecular masses
B. Trichloromethane and water have different boiling points
C. Trichloromethane has a higher density than water
D. Trichloromethane is more volatile than water
E. Trichloromethane and water do not mix
Answer:
A
Explanation:
Based on the observation that trichloromethane (chloroform) and water can be separated using a separating funnel, the conclusion that can be made from this observation alone is:
E. Trichloromethane and water do not mix.
When two substances are immiscible, such as trichloromethane (chloroform) and water, it means that they do not dissolve or form a homogeneous mixture when combined. Instead, they form separate layers within the mixture.
The immiscibility between trichloromethane and water is primarily due to their different polarities and intermolecular forces. Trichloromethane is a nonpolar compound with relatively weak intermolecular forces, while water is a highly polar compound with strong intermolecular forces.
Water is a polar molecule due to its bent shape and the presence of electronegative oxygen atoms that create partial positive and negative charges. Trichloromethane, on the other hand, is a symmetrical molecule with four chlorine atoms surrounding a central carbon atom, resulting in a nonpolar distribution of charge.
The fact that these two substances can be separated using a separating funnel indicates that they are immiscible, meaning they do not mix or dissolve in each other to form a homogeneous solution. Trichloromethane and water have different polarities and intermolecular forces, causing them to form separate layers in the separating funnel.
Learn more about Trichloromethane from the link given below.
https://brainly.com/question/30886030
#SPJ2
Hassium belongs to what
block of the periodic table
PLS ANSWER ASAP
Explanation:
Hassium belongs to d-block of the periodic table.
Changes in which two characteristics can indicate a physical change?
Answer:
Physical changes involve states of matter and energy.
Explanation:
No new substance is created during a physical change, although the matter takes a different form. The size, shape, and color of matter may change. Physical changes occur when substances are mixed but don't chemically react.
The characteristics that can be changed in the physical change has been shape or size of the compound.
Change in the element has been classified as chemical and physical change. The chemical change has been given as the change in the chemical composition of the elements.
The physical change has been the change in the state and form of the element, that has been reversible.
The characteristics that can be changed in the physical change has been shape or size of the compound.
For more information about the physical change, refer to the link:
https://brainly.com/question/1984022
Please help!! will give brainliest!! The temperature if the water to the nearest degree:__°C
Answer:
102 degrees, the intervals go by 2
Help me ASAP !!!!!!!!!!!
Answer:
What do you need help on
Explanation:
hii if you could help that would be great, if the answer is correct ill mark as brainliest :)))
Answer:
Reactants, Products is the answer i believe
Answer:
reactants, products
Explanation:
A chemical reaction is the process in which atoms present in the starting substances rearrange to give new chemical combinations present in the substances formed by the reaction. These starting substances of a chemical reaction are called the reactants, and the new substances that result are called the products.
(02.01 LC)
What is true of neutrons?
They have no charge and are located inside the nucleus.
They have no charge and are located outside the nucleus.
They are negatively charged and are located inside the nucleus.
They are negatively charged and are located outside the nucleus.
are we made of star dust? why or why not
Answer: Technically, yes. Are bodies are primarily made of carbon, which is found in pretty much everything. Stars, planets, plants, etc.
Explanation:
Identify 5 basic examples of Solutions?
Answer:
Coffee
Tea
Juice
Bleach
Salt water
Explanation:
ASAP MULTIPLE CHOICE WILL MARK BRAINLIEST
Sulfur has an atomic number of 16.
What is the electron configuration for an electronically neutral atom of sulfur?
Use an aufbau diagram.
1s22s22p63s23p3
1s22s22p63s23p5
1s22s22p63s23p6
1s22s22p63s23p4
Answer:
1s^2 2s^2 2p^6 3s^2 3p^4
Explanation:
i has picture here of correctness.
1.04 x 10^-3 pm to mm
Answer:
1 pm = 10^-12 m = 10^-10 cm = 10^-9 mm
1.04 x 10^-3 pm = 1.04 x 10^-3 x 10^-9
= 1.04 x 10^-12 mm.
Hope it helps...
The type of igneous rock which has a large number of cavities
formed by gases escaping from the molten rock is called
The answer would be scoria I believe