Answer:
a. 6 moles of O₂
b. 4.06×10²⁴ molecules of O₂
c. 3.04 g of KCl
Explanation:
Reaction of decomposition is:
2KClO₃ → 2KCl + 3O₂
a. See stoichiometry value
2 moles of potassium chlorate can decompose to 2 moles of potassium chloride and 3 moles of oxygen. Ratio is 2:3
If 2 moles of KClO₃ can decompose to 3 moles of O₂
Then 4 moles, may decompose to (4 . 3)/2 = 6 moles of O₂
b. In this case, the stoichiometry is the same.
Per 2 moles of KClO₃, I produce 2 moles of KCl
Then, 4.5 moles of KCl, were produced by 4.5 moles of KClO₃
We apply, the last relation:
(4.5 . 3) /2 = 6.75 moles of O₂ are also produced.
How many molecules are in 6.75 moles?
6.75 mol . 6.02×10²³ molecules/mol = 4.06×10²⁴ molecules of O₂
c. First of all, we convert the mass to moles:
5g . 1mol /122.55g = 0.0408 moles of salt
As ratio is 2:2, 0.0408 moles of salt, decompose to 0.0408 moles of KCl
We convert the moles to mass: 0.0408 mol . 74.55g /mol = 3.04g
Assume that the ratio of moles of Cl to moles of Cu are 2.39. If we can represent the formula by CuClx, what is the value for x? Round your answer to the nearest whole number. Do NOT include units. So, if you think the formula is CuCl6, you enter the number 6.
Answer:
x=2.
Explanation:
Hello there!
In this case, since we have a mole ratio of moles of Cl to moles of Cu as 2.39, it is possible to write the following:
[tex]\frac{2.39molCl}{1molCu}[/tex]
Thus, since the two possible copper chlorides are CuCl and CuCl₂, we can therefore infer that x=2 since it is close but not as close as it should to the whole number 2.
Best regards!
Select a reasonable explanation to account for the differences. There may be more than one possible reason that makes sense, just select one of them. It is possible not all of the water was evaporated from the sand, causing the recovered mass to be higher. It is possible not all of the water was evaporated from the sand, causing the recovered mass to be lower. While drying the NaCl, the liquid boiled and some splattered out of the evaporating dish, causing the recovered mass to be lower. While drying the NaCl, the liquid boiled and some splattered out of the evaporating dish, causing the recovered mass to be higher. There was no difference in recovered and original mass, so there is no difference to account for.
Answer:
It is possible not all of the water was evaporated from the sand, causing the recovered mass to be higher.
Explanation:
If not all the water is evaporated from the sand so the recovered mass to be higher than the sand from which more water is evaporated because evaporation of little amount of water causes less decrease in the recovered mass as compared to that sand from which more water is evaporated so more decrease occur in the recovered mass.
In the UNBALANCED chemical reaction for the combustion of acetylene (used in welding torches), determine at standard temperature and pressure, how many liters of
H2O gas are produced if 12 liters of Oxygen gas are completely consumed?
__C2H2 + __O2 —> __CO2 + __H2O
(Please help! Random answers for points will be reported)
Answer:
2 C2H2 + 5 O2 = 4 CO2 + 2 H2O
I've checked this multiple times this should be it
*PLEASE HELP*
Write the word equation and the balanced symbol equation for the following reactions
1.Sulfuric acid reacting with sodium carbonate
2.Hydrochloric acid reacting with magnesium hydrogencarbonate
Answer:
1. H₂SO₄ + Na₂CO₃ ⇒ Na₂SO₄ + H₂O + CO₂
sulfuric acid + sodium carbonate ⇒ sodium sulfate + water + carbon dioxide
2. 2 HCl + Mg(HCO₃)₂ ⇒ MgCl₂ + 2 H₂O + 2 CO₂
hydrochloric acid + magnesium hydrogencarbonate ⇒ magnesium chloride + water + carbon dioxide
Explanation:
1. Sulfuric acid is H₂SO₄. Sodium carbonate is Na₂CO₃.
H₂SO₄ + Na₂CO₃ ⇒ Na₂SO₄ + H₂O + CO₂
sulfuric acid + sodium carbonate ⇒ sodium sulfate + water + carbon dioxide
2. Hydrochloric acid is HCl. Magnesium hydrogencarbonate is Mg(HCO₃)₂.
2 HCl + Mg(HCO₃)₂ ⇒ MgCl₂ + 2 H₂O + 2 CO₂
hydrochloric acid + magnesium hydrogencarbonate ⇒ magnesium chloride + water + carbon dioxide
How many formula units make up 25.8g of magnesium chloride (MgCl2)? Express the number of formula units numerically.
Answer:
Explanation:
Kandndkjwnww
What does this even mean? Help please and thank you!
Answer:
T₁ = P₁V₁T₂ / P₂V₂
Explanation:
The combine gas equation is given by:
P₁V₁ / T₁ = P₂V₂ / T₂
Where:
P₁ => is the initial pressure
V₁ => is the initial volume
T₁ => is the initial temperature
P₂ => is the final pressure
V₂ => is the final volume
T₂ => is the final temperature
Finally, we shall make T₁ the subject of the above expression. This can be obtained as follow:
P₁V₁ / T₁ = P₂V₂ / T₂
Cross multiply
T₁P₂V₂ = P₁V₁T₂
Divide both side by P₂V₂
T₁ = P₁V₁T₂ / P₂V₂
Thus, the formula for T₁ is:
T₁ = P₁V₁T₂ / P₂V₂
What is decarboxylation??
Gimme one reaction of it..
Answer:
Decarboxylation is a chemical reaction that removes a carboxyl group and releases carbon dioxide (CO2). Usually, decarboxylation refers to a reaction of carboxylic acids, removing a carbon atom from a carbon chain.
Explanation:
Please give me brainlist
which graph shows the volume amount of gas relationship expected for an ideal gas, known as Avogadro's law
Answer:
The answer is A
Explanation:
I got it right on the test
Guanidin HNC(NH2)2 is a fertilizer. What is the percent by mass of nitrogen in the fertilizer
Answer:
71.1%. , is a fertilizer.
The total mass of the compound guanidine is 59 g/mo. It contains 3 nitrogen atoms. Hence, the percent composition of nitrogen in this fertilizer is 71.18 %.
What is mass percent ?The mass percent or percent composition of an element in a compound is the measure of amount of that element in 100 g of the compound. Thus, it is the ratio of mass of that element in the compound to the total mass multiplied by 100.
mass percent = mass of the element in the sample/ total mass × 100
The given compound is guanidine with the formula, HNC(NH2)₂ .
atomic mass of N = 14 g/mol
mass of carbon = 12 g/mol
hydrogen = 1 g/mol.
Then total mass of guanidine = 14 + 12 + 1 + 2(2 + 14) = 59 g/mol.
there are 3 nitrogen.
mass of three nitrogen = 42 g.
Then mass percent of N in guanidine = 42 g/ 59 g × 100= 71.1%.
Therefore, the percent by mass of nitrogen in guanidine is 71.18%.
Find more on mass percent:
https://brainly.com/question/9904990
#SPJ6
Hardness is the measure of a mineral's resistance to scratching.
True
False
Answer:
The answer to the question is true.
Calculate each of the following quantities:
a) Molarity of a solution prepared by diluting 27.0 cm3
of 0.150 M potassium chloride to
150.0 cm3
b) Molarity of a solution prepared by diluting 35.71 cm3
of 0. 0756 M ammonium
sulfate to 500 cm3
c) Final volume of a 0.05M solution prepared by diluting 10.0 cm3
of 0.155 M lithium
carbonate with water
Answer:
A. 0.027 M
B. 0.0054 M
C. 31 cm³
Explanation:
A. Determination of the final concentration (Molarity)
Initial Volume (V₁) = 27 cm³
Initial concentration (C₁) = 0.150 M
Final volume (V₂) = 150 cm³
Final congratulation (C₂) =?
C₁V₁ = C₂V₂
0.150 × 27 = C₂ × 150
4.05 = C₂ × 150
Divide both side by 150
C₂ = 4.05 / 150
C₂ = 0.027 M
Thus, the final concentration of the solution is 0.027 M
B. Determination of the final concentration (Molarity)
Initial Volume (V₁) = 35.71 cm³
Initial concentration (C₁) = 0.0756 M
Final volume (V₂) = 500 cm³
Final congratulation (C₂) =?
C₁V₁ = C₂V₂
0.0756 × 35.71 = C₂ × 500
Divide both side by 500
C₂ = (0.0756 × 35.71) / 500
C₂ = 0.0054 M
Thus, the final concentration of the solution is 0.0054 M
C. Determination of the final volume.
Initial Volume (V₁) = 10 cm³
Initial concentration (C₁) = 0.155 M
Final congratulation (C₂) = 0.05 M
Final volume (V₂) =?
C₁V₁ = C₂V₂
0.155 × 10 = 0.05 × V₂
1.55 = 0.05 × V₂
Divide both side by 0.05
V₂ = 1.55 / 0.05
V₂ = 31 cm³
Thus, the final volume of the solution is 31 cm³
A factory in your town uses cadmium as part of its manufacturing process. Due to recent economic conditions, cadmium is no longer available, and you must find a replacement. Suggest two elements that might be good replacements. Which of these would be your choice? Explain why.
Answer:
Zn
Explanation:
HELP ME
Elements in a vertical column on the Periodic Table have similar properties and are all members of the same
of elements.
А
molecule
B
phase
С
atom
D
group
Answer:
D group
................
Photosynthesis needs water and carbon dioxide to happen. These 2 ingredients are called _______.
HELLPPPP PLZZZ
many cars use electricity stored in lithium ion batteries as an alternative fuel. While there are many positive benefits to this technology, what negative impacts do they present? A) Reduces air pollution B) Decreases carbon emissions C) Disposal of spent batteries D) Cut dependence on fossil fuels
Answer:
C
Explanation:
is this one ok? XD
PLEASE PLEASE I do not understand may someone kindly help me pls
Answer:
It can be verified since the information came from a government article. Or you could trust the magzine/general article if its from a well known article. Explanation:
you get the point, you can add on to this. I can't make it the best since im not in your class learning. Good luck
You want to decaffeinate your coffee by extracting the caffeine out with dichloromethane (they don't do it that way anymore, but they used to). It's too late to extract the caffeine from the coffee beans, because you've already brewed yourself a 200 mL cup of coffee. Your particular brand of coffee contains 100 mg of caffeine in that 200 mL cup. The partition coefficient of caffeine in dichloromethane/water is 9.0 (it is more soluble in the dichloromethane).
How much caffeine would still be in your 200 mL if you did:_____.
A. One extraction using 200 mL ofdichloromethane
B. Two extractions using 100 mL ofdichloromethan each.
Solution :
Partition coefficient Kd
[tex]$=\frac{\frac{\text{mass of caffeine in } CH_2Cl_2}{\text{volume of } CH_2Cl_2}}{\frac{\text{mass of caffeine in water}}{\text{volume of water}}}$[/tex]
= 9.0
A). 1 x 200 mL extraction :
Let m be the mass of caffeine in the water
Mass of caffeine in [tex]$CH_2Cl_2$[/tex] = 100 - m
[tex]$\frac{\frac{100-m}{200}}{\frac{m}{200}} = 9.0$[/tex]
[tex]$=\frac{100-m}{m} = 9.0$[/tex]
[tex]$= 10 m = 100$[/tex]
m = 10
Mass remaining in coffee = m = 10 mg
B). 2 x 100 mL extraction :
First extraction :
Let [tex]$m_1$[/tex] be the mass of caffeine in the water
Mass of caffeine in [tex]$CH_2Cl_2$[/tex] = [tex]$100-m_1$[/tex]
[tex]$\frac{\frac{100-m_1}{100}}{\frac{m_1}{200}} = 9.0$[/tex]
[tex]$=\frac{100-m_1}{m_1} = 4.5$[/tex]
[tex]$ 5.5 \ m_1 = 100$[/tex]
[tex]$m_1$[/tex] = 18.18
Mass remaining in coffee = [tex]$m_1$[/tex] = 18.18 mg
Second Extraction :
Let [tex]$m_2$[/tex] be the mass of caffeine in the water
Mass of caffeine in [tex]$CH_2Cl_2$[/tex] = [tex]$18.18-m_2$[/tex]
[tex]$\frac{\frac{18.18-m_2}{100}}{\frac{m_2}{200}} = 9.0$[/tex]
[tex]$=\frac{18.18-m_2}{m_2} = 4.5$[/tex]
[tex]$ 5.5 \ m_2 = 18.18$[/tex]
[tex]$m_2$[/tex] = 3.3
Mass remaining in coffee = [tex]$m_2$[/tex] = 3.3 mg
250 ml juice has 22 g sugar how sugar is in 2000ml of juice
Answer:
176 grams of sugar
explanation is down
Explanation:
250 / 22 = 2000 / x250 ml to 22 grams = 2000 ml to x grams
cross multiply
(250)(x) = (2000)(22)
250x = 44,000
x = 44,000/250
x = 176 grams of sugar
Which of the following statements best describes the number of neutrons in an atom?
It is the same as the element's atomic number.
It is equal to the sum of atomic number and average atomic mass.
it is the same as the average atomic mass.
it is equal to the difference between atomic number and atomic mass number.
Answer:
its the last one
Explanation:
number of molecules in lithium oxide
4li2O
Answer:
Explanation:
Lithium is in group 1 so there's 1 outermost shell electron.
Oxygen is in group 6 so there's 6 outermost shell electron.
To react lithium with oxygen, we need 2 lithium and 1 oxygen
Each lithium transfer 1 electron to the oxygen and oxygen gain 2 electrons.
[tex]Li_{2}O\\[/tex] formed.
If there's 4 lithium oxide, 4 molecules will be there.
If you mean how many ATOMS are there, there will be 3×4=12 atoms.
What is the molar mass of H2CO3?
(Molar mass of H = 1.0079 g/mol; C = 12.010 g/mol; O = 15.999 g/mol)
29.02 g/mol
46.04 g/mol
62.02 g/mol
72.08 g/mol
Answer:
62.02 g/mol
62.03 g/mol
Explanation:
62.03 g/mol
The molar mass of H2CO3 is 62.02 g/mol
What is molar mass?The molar mass of the compound is the sum of molar mass of indivitual atom multiple by number of that atom.
Calculation of molar mass of H2CO3 ,
Molar mass of H2CO3 = Molar mass of H*2 + Molar mass of C + Molar mass of O*3
Molar mass of H2CO3 = 1.0079*2 + 12.010 + 15.999*3
Molar mass of H2CO3 = 2.0158 + 12.010 + 47.997
Molar mass of H2CO3 = 62.02 g/mol
To learn more about Molar mass here.
https://brainly.com/question/12127540
#SPJ3
What is produced when concentrated aqueous sodium chloride is electrolysed?
GUYS PLEASE HELP ME I BEG YOU
Answer:
an object is a rest upon a table
Titanium(IV) chloride decomposes to form titanium and chlorine, like this:_____.
TiCl4(1)-→Ti(s) + 2 Cl 2(g)
At a certain temperature, a chemist finds that a reaction vessel containing a mixture of titanium(IV) chloride, titanium, and chlorine at equilibrium has the following composition:_____.
compound amount
TiCl4 4.18g
Ti 1.32g
Cl2 1.08g
Calculate the value of the equilibrium constant for this reaction. Round your answer to significant digits. Clears your work. Undoes your last action. Provides information about entering answers.
Answer:
K = 8.6x10⁻⁶
Explanation:
a chemist finds that a 5.2L reaction vessel...
To solve this question we need first to find the equation of the equilibrium constant using the chemical eqiation:
TiCl₄(l) ⇄ Ti(s) + 2Cl₂(g)
The equilibrium constant expression is:
K = [Cl₂]²
Because equilibrium constant is defined as the ratio berween concentrationa of products over reactant powered to its reaction coefficient. But pure liquids as TiCl₄(l) and pure solids as Ti(s) are not taken into account
Now, we need to find the molar concentration of Cl₂, [Cl₂]:
Moles Cl₂ -Molar mass: 70.9g/mol-:
1.08g * (1mol / 70.9g) = 0.0152 moles / 5.2L =
2.93x10⁻³M = [Cl₂]
K = (2.93x10⁻³)²
K = 8.6x10⁻⁶which statement explains this observation?
Answer:
should be D. Hope this helpsss!
PLZ HELP THIS IS DUE TODAY!!!!!!
Which statement BEST describes the motion of the molecules of a solid object
A They vibrate in place within a fixed volume.
B They move around freely within a fixed volume.
C They vibrate in place and take the shape of a container.
D They move around freely and take the shape of a container.
How many grams of sulfur is there in 10.8 grams of sodium sulfate?
please help
Answer:
2.44 g S
Explanation:
One mole of Na2SO4 contains 1 mol of S.
Step 1: Find out the moles of Na2SO4:
10.8 g Na2SO4/MM Na2SO4
Step2: Find out the moles of S:
moles S = moles Na2SO4
Step 3: Find out the mass of S.
mass S = moles S x MM S
Dimensional analysis:
? g S = 10.8 g Na2SO4 x (1mol Na2SO4/MM Na2SO4) x (1mol S/1mol Na2SO4) x (MM S/ 1 mol S) = (10.8/142.04)x32.1 = 2.44 g S
(12 points) please please help me thanks
Answer: i think its the thired one
Explanation:
The volume of a gas is 18.6 L at 0.10 atm and 273 K. Calculate the pressure in
atms of the gas if its volume is changed to 1000 ml while the temperature remains
constant?
Answer:
1.86 atm
Explanation:
The following data were obtained from the question:
Initial volume (V₁) = 18.6 L
Initial pressure (P₁) = 0.10 atm
Final volume (V₂) = 1000 mL
Final pressure (P₂) =?
NOTE: The temperature is constant.
Next, we shall convert 1000 mL to L.
1000 mL = 1 L
Finally, we shall determine the final pressure of the gas as follow:
Initial volume (V₁) = 18.6 L
Initial pressure (P₁) = 0.10 atm
Final volume (V₂) = 1 L
Final pressure (P₂) =?
P₁V₁ = P₂V₂
18.6 × 0.10 = P₂ × 1
1.86 = P₂
P₂ = 1.86 atm
Thus, the final pressure of the gas is 1.86 atm
hi, if your looking for extra points (50+) and brainiest here is ur chance, answer this question correctly plz
Answer:
again, I'm going to say D lol.