Answer:
6.761 × 10⁴ g
Explanation:
Step 1: Write the balanced combustion reaction
2 C₂H₂ + 5 O₂ ⇒ 4 CO₂ + 2 H₂O
Step 2: Calculate the moles corresponding to 20000 g of C₂H₂
The molar mass of C₂H₂ is 26.038 g/mol.
20000 g × 1 mol/26.038 g = 768.11 mol
Step 3: Calculate the moles of CO₂ produced from 768.11 moles of C₂H₂
The molar ratio of C₂H₂ to CO₂ is 2:4.
768.11 mol C₂H₂ × 4 mol CO₂/2 mol C₂H₂ = 1536.2 mol CO₂
Step 4: Calculate the mass corresponding to 1536.2 moles of CO₂
The molar mass of CO₂ is 44.01 g/mol.
1536.2 mol × 44.01 g/mol = 6.761 × 10⁴ g
Which three forces can affect an object without contact?
Answer:
gravity, magnetic, electrostatic
When an atom is changed into an ion, the is changed
number of protons
b. number of neutrons
number of electrons
d. mass number
Answer:
the number of electrons will end up changing
1. Calculate the percent composition of the elements in C4H8O2.
Answer:
%C = 54.53%
%H = 9.144%
%O = 36.32%
Explanation:
Step 1: Calculate the mass of each element in 1 mole of C₄H₈O₂
We will multiply the number of atoms by the molar mass of the element.
mC: 4 × 12.01 g = 48.04 g
mH: 8 × 1.007 g = 8.056 g
MO: 2 × 16.00 g = 32.00 g
Step 2: Calculate the mass of 1 mole of C₄H₈O₂
We will sum the previously calculated masses of the elements.
mC₄H₈O₂ = mC + mH + mO = 48.04 g + 8.056 g + 32.00 g = 88.10 g
Step 3: Calculate the percent composition of each element
We will use the following expression.
%Element = mElement / mCompound × 100%
%C = 48.04 g / 88.10 g × 100% = 54.53%
%H = 8.056 g / 88.10 g × 100% = 9.144%
%O = 32.00 g / 88.10 g × 100% = 36.32%
Help this is for marks, who ever answers get brainliest
Answer:
Coal
Explanation:
thx for points :D
Answer:
Coal
Explanation:
your welcome<3
PLEASE HELP!!!
Some single displacement reactions involve one halogen replacing a less reactive halogen.
Cl2, replaces iodine in NaI, producing I2 and NaCl. Write the balanced single displacement reaction with the simplest whole number coefficients.
Do not include the states of the reactants or products.
Answer:
[tex]Cl_2+2NaI\rightarrow I_2+2NaCl[/tex]
Explanation:
Hello there!
In this case, according to the described chemical reaction, Cl2 replaces iodine in NaI in order to produce I2 and NaCl:
[tex]Cl_2+NaI\rightarrow I_2+NaCl[/tex]
It is possible to realize how chlorine replaces iodine in agreement with the single displacement reaction. Moreover, since chlorine and iodine atoms are not correctly balanced, we add a 2 in front of both NaI and NaCl in order to do so:
[tex]Cl_2+2NaI\rightarrow I_2+2NaCl[/tex]
Best regards!
The balanced single displacement reaction should be Cl2+2Nal→I2+2NaCl.
Balance single displacement reaction:The C12 should be replaced with the iodine in Nal for generating the 12 and NaCl.
Also, the chlorine should replace the iodine in the agreement along with a single displacement reaction. Also, the chlorine and the iodine atoms should not be rightly balanced.
Therefore, The balanced single displacement reaction should be Cl2+2Nal→I2+2NaCl.
Learn more about reactions here: https://brainly.com/question/13625271
What is the concentration of a solution with a
volume of 2.5 liters containing 660 grams of
calcium phosphate Ca3(PO4)2 ?
Answer:
660gx Imol = 2.1278 mol 310.189 2.5L 1.85 m).
Explanation:
The number of moles of 660 grams of calcium phosphate is 2.127. Then the molarity of the solution of 2.5 liter volume is 0.85 M.
What is molarity ?Molarity is a common term used to express the concentration of a solution. It is the ratio of number of moles of solute particles to the volume of solution in liters. Hence, its unit is mol/L or molar.
The molarity of a solution is a colligative quantity as well as temperature dependent.
Given,
molar mass calcium phosphate, Ca₃(PO₄)₂ =310.18 g/mol
Then,
no.of moles of calcium sulphate in 660 g = 660 g/310.18 g/mol = 2.127 moles
volume of solution = 2.5 L
Molarity = no.of moles of solute/ volume of solution in L
M = 2.127 moles/ 2.5 L
= 0.85 M.
Therefore, the molarity of the given solution is 0.85 molar.
Find more on molarity:
brainly.com/question/8732513
#SPJ6
What will happen when these mutations can no longer be killed by
antibiotics?
Answer:
Antibiotic resistance happens when the germs no longer respond to the antibiotics designed to kill them. That means the germs are not killed and continue to grow. It does not mean our body is resistant to antibiotics.
How many moles of CO2 are in 58.5 g of carbon dioxide?
4 points
2.72 mol CO2
1.07 mol CO2
3.42 mol CO2
1.83 mol CO2
PLEASE HELP:
iron reacts with nitrogen to form iron(III) nitride
Answer:
[tex]2Fe +N_{2} -> 2FeN[/tex]
Explanation:
Iron is Fe, nitrogen is N. Nitrogen is diatomic, which means it occurs as a molecular pair by itself. Iron III nitride has a chemical formula of FeN because nitrogen has a charge of 3-, and iron III tells us the iron has a charge of 3+ so you just need one of each to make the charges balance and the compound neutral.
When iron reacts with nitrogen to form iron(III) nitride, the balanced chemical equation of this reaction is as follows:
2 Fe + N₂ → 2FeN
What is balanced chemical equation ?The term balanced chemical equation is defined as a chemical equation in which mass is conserved and there are equal numbers of atoms of each element on both sides of the equation.
The chemical equation must be balanced in order to obey the law of conservation of mass. When the number of different atoms of elements in the reactants side equals the number of atoms in the products side, the chemical equation is balanced.
Nitrogen is diatomic, that means it occurs as a molecular pair by itself. Iron III nitride has a chemical formula of FeN because nitrogen has a charge of 3-, and iron III tells us the iron has a charge of 3+ .
Thus, iron reacts with nitrogen to form iron(III) nitride.
To learn more about the balanced chemical equation, follow the link;
https://brainly.com/question/28294176
#SPJ2
A student placed 2 drops of an unknown sample in a test tube and added 2 mL of ethanol to the test tube while mixing gently. They added 2 drops of potassium permanganate reagent to the test tube and mixed the contents of the test tube gently. The initial color was a deep purple but then changed to a yellow color which precipitates as a brown solid. What compound is most likely the unknown
Answer:
2-propanol
Explanation:
From the given information
2 drops of an unknown sample were said to be placed in a test tube followed by the addition of 2 ml of ethanol then gentle mixing. They then initiate a further addition of 2 drops of potassium permanganate reagent (KMNO₄) to the test tube and mixed the contents of the test tube thoroughly. After adding 2 drops of potassium permanganate reagent, the reagent oxidizes the secondary alcohols(2-propanol) to ketone(i.e acetone) and no further reaction will take place since there are no reactive C-H bonds left. The diagram attached below shows how the reaction proceeds.
Potassium chlorate, a common oxidizing agent in fireworks and matchheads, undergoes a solid-state disproportionation reaction when heated:
4KClO3 (s) ⟶ Δ3KClO4 (s) + KCl (s).
Use ΔHf ° and S° values to calculate ΔG_sys ° (which is ΔGrxn °) in kJ at 25°C for this reaction.
Answer:
Explanation:
[tex]\text{From the information given:}[/tex]
[tex]\text{The chemical reaction is : } 4 KClO_{3(s)} \to 3 KClO_{4(s)} + KCl_{(s)}[/tex]
[tex]\text{To find} \ \Delta G^0_{rxn}\ \text{using the formula}: \\ \\ \Delta G^0_{rxn} = \sum n_p \times \Delta _f G^0 (Products) - \sum n_R \times \Delta _fG^0 ( Reactants) \\ \\ where; n_p = \text{no of moles of products } \ and; \\ \\ n_R = \text{no of moles of reactants }[/tex]
[tex]\implies G^0_{rxn} = 3 \times \Delta _fG^0 [KClO_4{(s)}] + \Delta_fG^0[KCl_{(s)}] - 4 \times \Delta _f G^0 [ KClO_3 (s) ][/tex]
[tex]\Delta _fG^0 \ values \ at \ 25^0 \ C (298 \ K) are\ given \ as:\\\\ \Delta _fG^0 [KClO_4(s)] = -303.09 \ kJ \\ \\ \Delta _fG^0 [KCl(s) ] = - 409.14 \ kJ \\ \\ \Delta_f G^0 [KClO_3_{(s)}] = -296.25 \ kJ \\ \\ replacing \ the \ above \ values \ into \ equation (1) ; then:\\ \\ \\\Delta G^0_{rxn} = 3 *(-303.09) + (-409.14) - 4*(-296.25) \ kJ \\ \\ = (-909.27 - 409.14 + 1185) \ kJ \\ \\ = -133.41 \ kJ \\ \\ \mathbf{\Delta G^0_{rxn} = -133.4 \ kJ }[/tex]
The standard free energy change of the reaction is -133 kJ.
From the reaction equation, we have; 4KClO3 ⇄ 3KClO4 (s) + KCl (s). The standard free energy of formation of each specie is given below;
ΔG°f KClO3 = -296.35 kJ
ΔG°f KClO4 = -303.09 kJ
ΔG°f KCl = -409.14 kJ
Hence;
ΔG°rxn = [3(-303.09)] + ( -409.14)] - [(4( -296.35))]
ΔG°rxn = (-909.27) + (-409.14) - (-1185.4)
ΔG°rxn = -133 kJ
Learn more about free energy: https://brainly.com/question/953809
A chemical reaction causes the chemical compositions of substances to change.
a. True
b. False
Answer:
True
Explanation:
A chemical change is otherwise known as a chemical reaction. A chemical change is characterized by the formation of new substances, evolution of heat and change in chemical composition of substances. The change in the composition of substances during a chemical change is the result of the making and breaking of chemical bonds during a chemical change.
A chemical change is not easily reversible because it involves changes in chemical composition of substances.
An example of a chemical change is the combination of sodium hydroxide and hydrochloric acid according to the reaction equation;
HCl(aq) + NaOH (aq) -----> NaCl(aq) + H2O (l)
We easily notice the change in the chemical composition of each of the substances involved in the reaction.
atoms of which two elements have combined total of 23 protons
Answer:
sodium and magnesium
Explanation:
All atoms of a given element are identical in that they have the same number of
a) protons
b) neutrons
c) electrons
Answer:
A) protons
Explanation:
Protons are what give atoms their elements. If one atom has a differing number of protons from another atom, they will never be the same element.
what does pen mean?.
Answer:
P = protons
E = electrons
N = neutrons
remember protons and neutrons (protons are positive and neutrons are neutral as you can already tell by their names) are found at the centre of the nucleus (positive mass). Whilst the electrons (negative) orbit around the shells
5. What types of surfaces would result in greater friction?
Answer:
Rough and irregular surface
these surfaces tends a lot of friction
but on smooth surface there is least friction
hope it helps
PCR amplification utilizes ________ template to produce a ________ product. For this question, select the answer that best describes the process as a whole: the nature of the template you used (the starting template added to the reaction) and the nature of the final product produced in your PCR analysis that you ran out on a gel will apply here.
Answer:
Double-stranded/Double-stranded
Explanation:
The PCR which is popularly known as polymerase chain reaction is the technique that uses the single copy of DNA to make thousands or levels a huge number(in terms of millions) of duplicates of that DNA.
The PCR is a laboratory procedure that is utilized to make various duplicates of a section of DNA as depicted previously. It is an unmistakable strategy.
There are 3 fundamental advances in PCR:
Denaturing
Annealing
Extending
In denaturing measure requires warming of the double-stranded DNA template to isolate it into a solitary strand. Eventually, it resulted into a double-stranded item.
Use the following balanced reaction to solve 1-3:
P4 (s) + 6H2 (g) → 4PH3 (g)
1. How many grams of Hydrogen gas (H2) will be needed to react with 20 grams of P4?
Answer:
1.96g H2
Explanation:
P4 = 123.9g/mol
H2 = 2.02g/mol
[tex]\frac{20g P_{4} }{1}[/tex] * [tex]\frac{1 mol P_{4} }{123.9g}[/tex] * [tex]\frac{6 mol H_{2} }{1 mol P_{4} }[/tex] * [tex]\frac{2.02g H_{2} }{1 mol H_{2} }[/tex] = 1.96g H2
HELP ASAP WHATS THE DEFINITION I NEED JT NKW
Answer:
1.Summer solstice 2.seasons 3. winter solstice 4. Equinox
Explanation:
I hope it helps!
Have a great day!
The mass of a salt in grams that will dissolve in 100 mL of water.
____________ A solution that has dissolved the maximum amount of a compound at a given temperature. Any further addition of salt will remain undissolved.
_________ The product of the molarities of the dissolved ions, raised to a power equal to the ion's coefficient in the balanced chemical equation.
__________ A decrease in the solubility of an ionic compound as a result of the addition of a common ion.
__________ The maximum number of moles of a salt that will dissolve in 1 L of solution.
a. A decrease in the solubility of an ionic compound as a result of the addition of a common ion.
b. The mass of a salt in grams that will dissolve in 100 mL of water.
c. A solution that has dissolved the maximum amount of a compound at a given temperature. Any further addition of salt will remain undissolved.
d. The product of the molarities of the dissolved ions, raised to a power equal to the ion's coefficient in the balanced chemical equation.
e. The maximum number of moles of a salt that will dissolve in 1 L of solution.
Answer:
Solubility : The mass of a salt in grams that will dissolve in 100 mL of water
Saturated solution : A solution that has dissolved the maximum amount of a compound at a given temperature. Any further addition of salt will remain undissolved
Solubility product constant :The product of the molarities of the dissolved ions, raised to a power equal to the ion's coefficient in the balanced chemical equation
Common ion effect : A decrease in the solubility of an ionic compound as a result of the addition of a common ion
Molar solubility : The maximum number of moles of a salt that will dissolve in 1 L of solution
Explanation:
Solubility is expressed usually as the mass of solute per 100 grams or 100 ml of solvent.
Molar solubility of a solid is expressed as the concentration of the dissolved solid in a saturated solution.
Solubility product constant is defined as the equilibrium constant in which a solid ionic compound is dissolved to produce its ions in solution. It is represented as
The common-ion effect is the decrease in solubility of a sparingly soluble salt by the addition to the solution of a soluble compound with an ion in common with the precipitate.
Saturated solution is defined as the solution in which no more solute particles can be dissolved in the solvent.
According to the text, fission occurs when the nucleus
two lighter nuclei.
Answer:
Splits into
Explanation:
Because fission reaction is divided into two or more pieces.
Explain this method (Froth floatation method)..........
Answer:
froth flotation is a technique commonly used in the mining industry. In this technique, particles of interest are physically separated from a liquid phase as a result of differences in the ability of air bubbles to selectively adhere to the surface of the particles, based upon their hydrophobicity.
Explanation:
Froth floatation method is commonly used to concentrate sulphide ore such as galena (PbS), zinc blende (ZnS) etc. (ii) In this method, the metaalic ore particles which are perferentially wetted by oil can be separated from gangue. (iii) In this method, the crushed ore is suspended in water and mixed with frothing agent such as pine oil, eucalyptus oil etc. (iv) A small quantity of sodium ethyl xanthate which act as a collector is also added. (v) A froth is generated by blowing air through this mixture. (vi) The collector molecules attach to the ore particles and make them water repellent. (vii) As a result, ore parrticles, wetted by the oil, rise to the surface along with the froth. (viii) The froth is skimmed off and dried to recover the concentration ore. (ix) The gangue particles that are preferentially wetted by water settle at the bottom.
- Explain why the term greenhouse effect is used to describe the theory of global
warming.
Does the greenhouse effect affect life on Earth? If yes, explain how?
What are the possible effects of a buildup of greenhouse gases in our atmosphere?
Classify the following as either an element, compound, homogeneous mixture or
heterogeneous mixture:
milk
Answer:
HeterogeneousExplanation:
Milk seems to be homogeneous mixture but actually milk is a heterogeneous mixture and a colloid solution.If 4.0 g of helium gas occupies a volume of 22.4 L at 0 o C and a pressure of 1.0 atm, what volume does 3.0 g of He occupy under the same conditions?
Answer:
the volume occupied by 3.0 g of the gas is 16.8 L.
Explanation:
Given;
initial reacting mass of the helium gas, m₁ = 4.0 g
volume occupied by the helium gas, V = 22.4 L
pressure of the gas, P = 1 .0 atm
temperature of the gas, T = 0⁰C = 273 K
atomic mass of helium gas, M = 4.0 g/mol
initial number of moles of the gas is calculated as follows;
[tex]n_1 = \frac{m_1}{M} \\\\n_1 = \frac{4}{4} = 1[/tex]
The number of moles of the gas when the reacting mass is 3.0 g;
m₂ = 3.0 g
[tex]n_2 = \frac{m_2}{M} \\\\n_2 = \frac{3}{4} \\\\n_2 = 0.75 \ mol[/tex]
The volume of the gas at 0.75 mol is determined using ideal gas law;
PV = nRT
[tex]PV = nRT\\\\\frac{V}{n} = \frac{RT}{P} \\\\since, \ \frac{RT}{P} \ is \ constant,\ then;\\\frac{V_1}{n_1} = \frac{V_2}{n_2} \\\\V_2 = \frac{V_1n_2}{n_1} \\\\V_2 = \frac{22.4 \times 0.75}{1} \\\\V_2 = 16.8 \ L[/tex]
Therefore, the volume occupied by 3.0 g of the gas is 16.8 L.
The volume occupied by 3.0 g of He is mathematically given as
V2=16.8L
What volume does the 3.0 g of He occupy?Question Parameters:
If 4.0 g of helium gas occupies a volume of 22.4 L at 0 o C and a pressure of 1.0 atm, what volume does 3.0 g of H
Generally, the equation for the gas equation is mathematically given as
PV=nRT
When the reacting mass is 3g
n2=3/4
n2=0.75
Therefore
V1/n1=V2/n2
Where
n1=1
[tex]V2=\frac{22.4*0.75}{1}[/tex]
V2=16.8L
Read more about volume
https://brainly.com/question/1578538
How many grams of chlorine are required in order to consume 85g of
sodium?
2 Na +1 C12
+ 2 Naci
is the sun the only star in our solar system
Answer:
Hey mate......
Explanation:
This is ur answer.......
The largest star, and indeed the only star in our solar system, is the sun. The sun is a bit under a million miles across. About 110 Earths put side by side would equal the size of the sun. The sun has 99.8 percent of the mass of our solar system.
Hope it helps!
Mark me brainliest pls......
Follow me! :)
yes hahahahahahah......
Write and balance the following equation:
zinc (II) nitrate + copper
→ copper (1) nitrate + zinc
Answer:
This reaction will not occur since copper is less reactive than zinc.
Explanation:
Since copper is located at a lower position in the reactivity series than zinc, there will be no displacement reaction if copper is put into zinc (II) nitrate solution.
if i have a bean then how many rice do i have in bean??
Answer:
What?
Explanation:
That makes no sense at all
What features did you use to classify igneous rocks as extrusive or intrusive ?
Answer: Igneous rocks may be simply classified according to their chemical/mineral composition as felsic, intermediate, mafic, and ultramafic, and by texture or grain size: intrusive rocks are course grained (all crystals are visible to the naked eye) while extrusive rocks may be fine-grained (microscopic crystals) or glass.
Explanation: Hope this helped! :)
Answer:
Igneous rocks may be simply classified according to their chemical/mineral composition as felsic, intermediate, mafic, and ultramafic, and by texture or grain size: intrusive rocks are course grained (all crystals are visible to the naked eye) while extrusive rocks may be fine-grained (microscopic crystals) or glass ( ...