You have installed Hyper-V on ITAdmin. You're experimenting with creating virtual machines. In this lab, your task is to create two virtual machines named VM1 and VM2. Use the following settings as specified for each machine VMI: • Virtual machine name: VM1 • Virtual machine location: D:\HYPERV - Generation Generation 1 • Startup memory: 1024 MB (do not use dynamic memory) • Networking connection: External • Virtual hard disk name: VM1.vhdx • Virtual hard disk location: DAHYPERV\Virtual Hard Disks • Virtual hard disk size: 50 GB Operating system will be installed later VM: Virtual machine name: VM2 Vismachine location. DAHYPERY

Answers

Answer 1

In the Hyper-V environment, two virtual machines named VM1 and VM2 need to be created with specific settings. VM1 should have a Generation 1 configuration, 1024 MB startup memory, an external networking connection, and a 50 GB virtual hard disk located at D:\HYPERV. VM2, on the other hand, should be located at DAHYPERV, and its operating system installation will be done later.

To create the virtual machines as specified, follow these steps in Hyper-V: Open the Hyper-V Manager on ITAdmin.

Right-click on the server name and select "New" > "Virtual Machine" to start the Virtual Machine Wizard.

In the wizard, provide the name "VM1" for the first virtual machine and choose a location for it, such as "D:\HYPERV."

Select the "Generation 1" option for the virtual machine generation and click "Next."

Set the startup memory to 1024 MB (uncheck the "Use dynamic memory" option) and proceed to the next step.

Choose an appropriate network connection from the drop-down menu to enable external network connectivity.

Specify the name "VM1.vhdx" for the virtual hard disk and set its location to "DAHYPERV\Virtual Hard Disks." Set the size to 50 GB.

Complete the remaining steps of the wizard and create VM1 with the provided settings.

To create VM2, follow the same steps as above, but use "VM2" as the virtual machine name and set its location to "DAHYPERV." Leave the operating system installation for VM2 to be done later.

By following these instructions, you can successfully create two virtual machines, VM1 and VM2, with the specified settings in the Hyper-V environment on ITAdmin.

Learn more about  memory here: https://brainly.com/question/28903084

#SPJ11


Related Questions

Which line of code constructs Guam as an instance of AirportCode?
class AirportCode {
constructor (location, code) {
this. location = location;
this.code = code;

Answers

In your given code, Guam as an instance of AirportCode would be created using the following line of code:
```javascript
let guam = new AirportCode("Guam", "GUM");
```

The line of code that constructs Guam as an instance of AirportCode is:
const guam = new AirportCode('Guam', 'GUM');
This code creates a new object of the AirportCode class, with the location set to "Guam" and the code set to "GUM". By calling the constructor method of the AirportCode class, we can create multiple instances of AirportCode with different locations and codes. In this case, we are specifically creating an instance for Guam.
Guam is a small island territory in the western Pacific Ocean, and its airport code is GUM. The use of airport codes is important for identifying and tracking flights and airport locations globally. By creating an instance of AirportCode for Guam, we can easily refer to it in our code and perform actions on it as needed.
In summary, the line of code that constructs Guam as an instance of AirportCode is essential for creating a reference point for the Guam airport location in our code. The use of airport codes and their associated classes is crucial for efficient and effective air travel operations.

Learn more about gaum here-

https://brainly.com/question/29620128

#SPJ11

3. what is the big-o runtime of preorderprint? explain your answer.

Answers

I apologize, but I do not have enough information to determine the big-O runtime of a method called preorderprint.

Big-O runtime analysis requires knowledge of the specific algorithm and implementation details of a method. Without seeing the code for preorderprint, I cannot do a precise big-O analysis.

In general, big-O runtime is used to characterize the worst-case complexity of an algorithm, and tells us how the runtime scales as the input size increases. The main big-O categories are:

O(1) - Constant time: No dependence on input size.

O(n) - Linear time: Directly proportional to input size. Adding/accessing elements.

O(n2) - Quadratic time: Proportional to the square of the input size. Nested loops.

O(log n) - Logarithmic time: Proportional to the logarithm of the input size. Tree operations.

O(n log n) - N log n time: Proportional to n times the logarithm of n. Some sorting algorithms.

So without seeing the specific preorderprint method, I can only provide this general guidance on big-O analysis. Let me know if you have any other questions!

The Big-O runtime of preorderprint depends on the structure of the binary tree being traversed. In the worst case scenario, where the binary tree is completely unbalanced, the runtime of preorderprint can be O(n), where n is the number of nodes in the tree.

This is because in the worst case scenario, the algorithm will have to visit every single node in the tree in order to complete the traversal. In this case, the algorithm will have to perform n operations, where each operation involves visiting a single node.

On the other hand, in the best case scenario, where the binary tree is perfectly balanced, the runtime of preorderprint can be O(log n), where n is the number of nodes in the tree. This is because in a perfectly balanced tree, the height of the tree is log n, which means that the algorithm will only have to perform log n operations in order to complete the traversal.

Overall, the Big-O runtime of preorderprint can be anywhere between O(log n) and O(n), depending on the structure of the binary tree being traversed. It is important to keep this in mind when working with large or complex binary trees, as the runtime of the algorithm can have a significant impact on performance.

To know more about preorder print visit:-

https://brainly.com/question/30218218

#SPJ11

in addition to centralized data processing, the earliest systems performed all data input and output at a central location, often called a _____.

Answers

In addition to centralized data processing, the earliest systems performed all data input and output at a central location, often called a data center.

A data center is a physical facility where computing and networking resources are centralized for the purpose of storing, managing, and processing large amounts of data. It typically houses servers, storage systems, networking equipment, and other infrastructure necessary for data processing. The data center serves as a central hub for data input and output, where data is received from various sources, processed, and distributed to the appropriate destinations. This centralization of data processing allows for efficient management and control of data within an organization.

You can learn more about data center at

https://brainly.com/question/13441094

#SPJ11

From the basic security services, the only one that cannot be suitably offered with cryptographic means is: a. Confidentiality b Integrity c. Authentication (legitimacy and non-repudiation). d. Availability

Answers

The security service that cannot be suitably offered with cryptographic means is: d. Availability.

Which of the following security services cannot be suitably offered with cryptographic means: a. Confidentiality b. Integrity c. Authentication d. Availability?

Cryptographic means can be employed to provide confidentiality, integrity, and authentication in information security.

However, availability is not a security service that can be suitably offered solely through cryptographic means.

Confidentiality refers to ensuring that data is accessible only to authorized individuals or entities.

Cryptographic techniques such as encryption can be used to protect the confidentiality of data by rendering it unreadable to unauthorized parties.

Integrity ensures that data remains unaltered and maintains its accuracy and consistency.

Cryptographic mechanisms like digital signatures and message authentication codes (MACs) can be utilized to verify the integrity of data and detect any unauthorized modifications.

Authentication provides assurance of the legitimacy of individuals or entities involved in a communication.

Cryptographic techniques such as digital certificates and public key infrastructure (PKI) are commonly used to establish the authenticity of users or systems.

Availability, on the other hand, refers to the accessibility and reliability of systems and services.

While cryptographic protocols can contribute to availability indirectly by protecting against certain types of attacks, they cannot solely guarantee the availability of systems.

Availability is more closely related to ensuring appropriate infrastructure, redundancy, disaster recovery plans, and other non-cryptographic means.

Therefore, of the given options, availability is the security service that cannot be suitably offered solely through cryptographic means.

Learn more about Availability

brainly.com/question/17442839

#SPJ11

A large enterprise has moved all its data to the cloud behind strong authentication and encryption. A sales director recently had a laptop stolen, and later, enterprise data was found to have been compromised from a local database. Which of the following was the MOST likely cause?
A. Shadow IT
B. Credential stuffing
C. SQL injection
D. Man in the browser
E. Bluejacking

Answers

Based on the information provided, the most likely cause of the data compromise is option C: SQL injection. SQL injection is a common type of attack where an attacker inserts malicious SQL code into a vulnerable database system, leading to unauthorized access to the system and sensitive information.

In this scenario, the sales director's laptop may have had access to the local database, and if it was not properly secured or updated, it could have been an easy target for a hacker. While strong authentication and encryption can be effective in securing cloud data, it's important to remember that security is only as strong as its weakest link. In this case, the local database may have been the weak point in the system, and it's possible that the enterprise did not have adequate security measures in place to protect it. Option A, shadow IT, refers to the use of unauthorized or unapproved technology within an organization, and while it can be a security risk, it is less likely to be the cause of a data breach in this scenario. Option B, credential stuffing, involves using stolen login credentials to gain unauthorized access to an account, but it is unlikely that a sales director's laptop would have had such credentials stored on it. Option D, man in the browser, involves intercepting browser communications to steal information, but it is less likely to be the cause of a data breach from a local database. Option E, bluejacking, is a type of Bluetooth attack that involves sending unsolicited messages to Bluetooth-enabled devices, but it is unlikely to be the cause of a data breach in this scenario.

Learn more about data here

https://brainly.com/question/30395228

#SPJ11

definition of report in database system​

Answers

Answer:

Display or distribute a summary of data. Archive snapshots of the data. Provide details about individual records. Create labels.

Explanation:

A report is a database object that comes in handy when you want to present the information in your database for any of the following uses: Display or distribute a summary of data. Archive snapshots of the data. Provide details about individual records. Create labels.

Answer:A database report is the formatted result of database queries and contains useful data for decision-making and analysis

Explanation:

the components in the system/application domain commonly reside in the same room. the room in which central server computers and hardware reside is commonly called a _______________.

Answers

The components in the system/application domain are the building blocks that make up a system.

These components may include hardware, software, networking equipment, and other tools that are necessary for the system to function properly. In many cases, the components in the system/application domain are located in the same physical location, commonly referred to as a data center.
A data center is a facility used to house computer systems and other related components, such as telecommunications and storage systems. It is a secure, temperature-controlled environment that is designed to protect the hardware and other equipment from environmental factors like humidity, dust, and temperature fluctuations. The data center is often equipped with backup power supplies, such as generators, to ensure that the hardware remains operational in the event of a power outage.
The central server computers and hardware that make up the backbone of a system are typically located in the data center. This allows for easy access to the equipment by the IT staff responsible for maintaining the system. In addition, the central location of the hardware makes it easier to monitor and manage the system.
In conclusion, the room in which central server computers and hardware reside is commonly called a data center. It is an essential component of the system/application domain, providing a secure and controlled environment for the hardware and other related equipment to operate in.

Learn more about software :

https://brainly.com/question/1022352

#SPJ11

T/F: a turnkey system is a package that includes hardware, software, network connectivity, and support services from a single vendor.

Answers

True. A turnkey system is a package that includes all the necessary components for a particular system or project. It typically includes hardware, software, network connectivity, and support services from a single vendor.

The turnkey approach is beneficial because it simplifies the procurement process for businesses, eliminates the need for multiple vendors, and ensures that all components are compatible with each other. The vendor responsible for the turnkey system will usually provide ongoing support and maintenance to ensure that the system continues to function properly. Overall, a turnkey system can be an efficient and cost-effective solution for businesses that need a complete system solution without having to manage multiple vendors and components.A turnkey system is a package that includes hardware, software, network connectivity, and support services from a single vendor. This type of system is designed to be easily implemented and ready for use upon delivery, saving the client time and effort in setting up and configuring the components themselves.

To know more about hardware visit:

brainly.com/question/15232088

#SPJ11

how to plot a signal with time vector same length modulate audio file

Answers

Plotting a signal with a time vector of the same length as a modulated audio file involves loading the audio data, generating a time vector with the appropriate number of time points, and then using a plotting function to generate the desired plot. With these steps in mind, you should be well-equipped to plot your own audio signals with ease.

When it comes to plotting a signal with a time vector of the same length as a modulated audio file, there are a few key steps that you'll need to follow.

First, you'll need to load your audio file into whatever programming environment or software you're using. This will typically involve reading in the file data and converting it to a numerical representation that you can work with.

Once you have your audio data loaded, you'll need to generate a time vector that has the same length as the audio file. This can typically be done by dividing the length of the audio file (in samples or time units) by the sampling rate of the audio, which will give you the duration of the file in seconds. You can then use this duration to generate a time vector with the appropriate number of time points.

In summary, plotting a signal with a time vector of the same length as a modulated audio file involves loading the audio data, generating a time vector with the appropriate number of time points, and then using a plotting function to generate the desired plot. With these steps in mind, you should be well-equipped to plot your own audio signals with ease.

To know more about modulated audio visit:

https://brainly.com/question/26033167

#SPJ11

Which of the following provides a report of all data flows and data stores that use a particular data element? a. Data warehouses b. Data types

Answers

Data warehouses provide a report of all data flows and data stores that use a particular data element. The correct answer is a. Data warehouses.

Data warehouses are designed to store and analyze large amounts of data from various sources. They provide a centralized repository where data from different systems and databases can be consolidated and organized for reporting and analysis purposes. In a data warehouse, data is typically organized into dimensions and facts, allowing for efficient querying and analysis.

Data types, on the other hand, refer to the specific formats and constraints that are applied to data elements within a database or programming language. They define the kind of data that can be stored and the operations that can be performed on that data, such as string, numeric, or date types.

The correct answer is a. Data warehouses.

You can learn more about Data warehouses at

https://brainly.com/question/28427878

#SPJ11

for task 1 you are given all the required files for the program. the program has users list and books list that are implemented by vector. you need to convert the users list to linked list.

Answers

To convert the users list from a vector to a linked list, you will need to create a new LinkedList object and add all the elements from the vector to the linked list using the addAll() method.

A vector is a dynamic array that can grow or shrink in size as needed. However, linked lists are more efficient than vectors for certain operations, such as inserting or deleting elements in the middle of the list.

To convert a vector to a linked list, you can create a new LinkedList object and then use the addAll() method to add all the elements from the vector to the linked list. This method will add each element in the order that they appear in the vector.

Once the elements have been added to the linked list, you can use the linked list in place of the vector for any further operations.

For more questions like Elements click the link below:

https://brainly.com/question/13025901

#SPJ11

Use the following variable definitions .data var1 SBYTE -14, -12, 13, 10 var2 WORD 1200h, 2200h, 3200h, 4200h var3 SWORD -6, -22 var4 DWORD 11,12,13,14,15 What will be the value of the destination operand after each of the following instructions? Show your answers in Hexadecimal. execute in sequence mov edx, var4 ;a. movzX edx, [var2+4] ;b. mov edx, [var4+4] ic. movsx edx, var1 ;d.

Answers

The hexadecimal values are provided as per the given data, and the prefix "0x" is not used in this representation.

Based on the provided variable definitions, let's evaluate the value of the destination operand after executing each instruction:

a. mov edx, var4

The value of the destination operand edx will be 11 (hexadecimal representation) since we are moving the first value of var4 into edx.

b. movzx edx, [var2+4]

The value of the destination operand edx will be 2200h (hexadecimal representation) since we are moving the second value of var2 into edx. The movzx instruction performs zero extension, which means it doesn't sign-extend the value.

c. mov edx, [var4+4]

The value of the destination operand edx will be 12 (hexadecimal representation) since we are moving the second value of var4 into edx.

d. movsx edx, var1

The value of the destination operand edx will be FFFFFFF2 (hexadecimal representation) since we are moving the first value of var1 into edx and performing sign extension. The sign extension preserves the sign of the value, which in this case is negative (-14 in SBYTE).

Know more about hexadecimal values here:

https://brainly.com/question/9021877

#SPJ11

What does the following line of code define? bool operator>(const Cylinder &c) An overloaded operator & An overloaded operator > An overloaded function Cylinder A virtual function Cylindarer

Answers

Overloading operators allows for more intuitive and readable code when working with objects of a certain class, making code more efficient and easier to read.

The line of code "bool operator>(const Cylinder &c)" defines an overloaded operator "greater than" for the class Cylinder. The operator ">" has been overloaded to compare two Cylinder objects and return a boolean value, true if the left-hand side object is greater than the right-hand side object, and false otherwise. The const reference parameter "const Cylinder &c" refers to the right-hand side object being compared. This function has been defined outside the class, which means it is not a member function of the class. Overloading operators allows for more intuitive and readable code when working with objects of a certain class, making code more efficient and easier to read.

To know more about Overloading operators visit:

https://brainly.com/question/31633902

#SPJ11

Which of the following best describes the skill sets used in data analytics?
A) Building data warehouses; Populating data structures; Mining the data.
B) Acquiring/cleansing data; Creating data structures/models; Mining/analyzing data.
C) Developing data structures/models; Acquiring storage capacity; Analyzing the data.
D) Creating data; Building data structures; Piloting data studies.

Answers

Data analytics is the process of collecting, analyzing, and interpreting data with the goal of obtaining useful information. The skill sets utilized in data analytics include Acquiring/cleansing data;

Creating data structures/models; Mining/analyzing data. Therefore, option B, Acquiring/cleansing data; Creating data structures/models; Mining/analyzing data, best describes the skill sets used in data analytics.What is data analytics?Data analytics is a technique that allows for the collection, processing, and analysis of large data sets (big data) to obtain insights into customer behavior, market trends, and business operations. It involves a variety of techniques, including data mining, machine learning, and predictive modeling, to detect patterns and trends in data.Data analytics is used in various fields, including healthcare, finance, and marketing, to assist organizations in making data-driven decisions. With the rise of big data, there is a growing need for experts in data analytics, and the demand for data analysts and data scientists is expected to grow in the future.

To know more about analytics visit:

https://brainly.com/question/26515963

#SPJ11

which benefit of an information system is categorized as a tangible

Answers

One benefit of an information system that is categorized as tangible is cost savings.

What is an example of a tangible benefit of an information system?

Information systems can bring a wide range of benefits to an organization, from improved decision-making to better collaboration and communication. One of the most tangible benefits, however, is cost reduction. By automating processes, reducing manual labor, and increasing efficiency, information systems can help organizations save money in a variety of ways.

For example, an information system can help a company streamline its supply chain, reducing inventory costs and minimizing waste. It can also help a business automate its accounting processes, reducing the need for manual data entry and minimizing errors. Overall, the cost reduction benefits of information systems can be quantified and measured in terms of financial savings, making them a concrete advantage for organizations looking to improve their bottom line.

Learn more about Information systems

brainly.com/question/31462581

#SPJ11

question at position 1 the 4 steps of the problem solving process brainstorm / research possible solutions.

Answers

The 4 steps of the problem solving process brainstorm are;

Lay out the problem that is needed to be solved.Identify the objectives of a possible solution.Make sure you solutions individually. After been clear of the problems,  as well as the objectives and personal solutions to the problems, work as a group.

What is brainstorming?

Brainstorming  can be described as the group problem-solving method  and these d encompass the spontaneous contribution of creative ideas and solutions.

It should be noted that these technique requires intensive, freewheeling discussion  where people can suggest as many ideas as possible based on their diverse knowledge.

Learn more about brainstorm at:

https://brainly.com/question/1606124

#SPJ1

What-if analysis is a very powerful and simple tool to test the effects of different assumptions in a spreadsheet.
Select one:
True
False

Answers

True. What-if analysis is indeed a powerful and simple tool to test the effects of different assumptions in a spreadsheet. It allows users to explore various scenarios by changing input values and observing the corresponding outcomes.

With what-if analysis, you can assess the impact of different variables on calculations, formulas, and results within a spreadsheet model. It enables you to perform sensitivity analysis, goal-seeking, and data tables to understand how changes in assumptions or inputs affect the final outcomes. By manipulating the values of certain cells or variables, you can evaluate different scenarios and make informed decisions based on the resulting changes. What-if analysis is widely used in financial modeling, budgeting, forecasting, and decision-making processes.

To learn more about  analysis   click on the link below:

brainly.com/question/20357752

#SPJ11

fitb. a deauthentication (deauth) attack is a form of __________ attack.

Answers

A deauthentication (deauth) attack is a form of wireless network attack. This type of attack is also known as a deauth flood attack, and it is aimed at disrupting the connectivity between a wireless access point (AP) and its clients.

The goal of a deauth attack is to force a client to disconnect from the targeted AP and reconnect, which could lead to the capture of sensitive information. A deauth attack is typically performed by an attacker who has gained access to the wireless network. The attacker sends deauth packets to the targeted AP, impersonating one of its clients. The AP then responds by sending a disassociation frame to the client, which causes the client to disconnect. The client will then attempt to reconnect to the AP, but the attacker can send additional deauth packets to prevent reconnection.

The deauth attack is a type of denial-of-service (DoS) attack, and it can be executed using various tools, such as Kali Linux. The attack can be launched by anyone with access to the wireless network, which makes it a significant security concern. To prevent deauth attacks, it is recommended that network administrators implement security measures, such as the use of strong passwords, disabling SSID broadcast, and implementing WPA2 encryption. Additionally, network administrators should monitor their networks regularly for unusual activity, which could be an indication of a deauth attack.

Learn more about wireless network attack here-

https://brainly.com/question/12928621

#SPJ11

if msbetween = 27.9 and mswithin = 54.2, what is the value of fobt?

Answers

If msbetween = 27.9 and mswithin = 54.2,   the value of fobt is  approximately 0.5148.

To find the value of Fobt when MSbetween = 27.9 and MSwithin = 54.2, We need to use the following formula:
Fobt = MSbetween / MSwithin
Here, MSbetween = 27.9 and MSwithin = 54.2.

Substitute the values into the formula:
Fobt = 27.9 / 54.2 Perform the division

Fobt ≈ 0.5148 So, the value of Fobt is approximately 0.5148.

Typically, the F-test compares the variability between groups (MsBetween) to the variability within groups (MsWithin) to assess whether there are significant differences among the groups or variables being compared.Therefore value of  fobt is  approximately 0.5148.

To learn more about fobt visit: https://brainly.com/question/30267179

#SPJ11

Write a program that will read a file with airport codes. For example, the file may contain:
IAH
IAD
SFO
STL
BOS
MSP
For each given airport code, the program will fetch the airport name, the city name, state name, temperature, and if there is a delay or not, from http://services.faa.gov/airport/status/{CODE}?format=application/json
[replace {CODE} with an airport code, for example
http://services.faa.gov/airport/status/IAH?format=application/json
to get data for the airport code IAH]
The program will print, in sorted order of city name (if two cities have the same name, then the data is further sorted on state name), the following details: city | state | airport code | airport name | temperature | delayed or --- (--- for no delay).
The program will also print, below the table, one line
Number of airport delays: #
(where # is the actual number of delays).
If for some reason the details for a airport could not be obtained, then the row for that should be shown with --- for all data that could not be obtained for that airport code (but the airport code itself will be displayed on the row).

Answers

To create a program that reads a file with airport codes, retrieves corresponding airport data from an API, and displays the information in a sorted table format.

What is the purpose of the program described?

The main answer involves developing a program that reads a file containing airport codes, retrieves data for each code from the FAA's airport status API, and displays the information in a sorted table format.

The program will fetch airport name, city name, state name, temperature, and delay status for each airport code. The table will be sorted based on city name, and if two cities have the same name, further sorting will be done based on state name.

For any missing or unavailable data, "---" will be displayed in the corresponding table cell. Additionally, the program will output the number of airport delays.

Learn more about program

brainly.com/question/30613605

#SPJ11

In creating a new class called 'UniqueList' you are to extend the built-in 'list' class, but ensure items added to the class are unique - that is, no item may be added to the list that is already in the list. Assume that items can only be added to the class via the 'append' and 'insert' methods. Which of the following code must be added to create this class if a successful add returns True', otherwise 'False?

Answers

To create the 'UniqueList' class, the following code must be added to ensure that items added to the class are unique:

```
class UniqueList(list):
   def append(self, value):
       if value not in self:
           super().append(value)
           return True
       else:
           return False

   def insert(self, index, value):
       if value not in self:
           super().insert(index, value)
           return True
       else:
           return False
```

This code extends the built-in 'list' class and overrides the 'append' and 'insert' methods. Both methods check whether the value to be added is already in the list. If the value is not in the list, the value is added and the method returns True. If the value is already in the list, the value is not added and the method returns False. This ensures that items added to the 'UniqueList' class are unique. By returning True or False, the methods can be used to determine whether an add was successful or not. If the return value is True, the add was successful. If the return value is False, the add was not successful and the item was not added to the list.

Learn more about overrides here:

https://brainly.com/question/13326670

#SPJ11

Write a program that allows a user to play 5-Card-Draw Poker against the computer.
You must start with the following example code supplied by Deitel & Deitel (See example code below). This will help you get started with the game of Poker. Please read this site to learn the rules of Poker http://en.wikipedia.org/wiki/5_card_draw. Complete the following step and you will have a working Poker game!!!
Adapted from Deitel & Deitel’s C How to Program (6th Edition):
(1) In order to complete the game of 5-card-draw poker, you should complete the following:
(a) (5 pts) Declare a struct called Card that contains two integers. One integer represents the index of where to find the face value of the card in the array of strings, and the other integer represents the index of where to find the suit of the card in the other array of strings.
(b) (5 pts) Declare a struct called Hand that contains an array of 5 struct Cards.
(c) (5 pts) Create a menu to that allows the user to view the game rules, play the game, and exit the game.
(d) (10 pts) Modify the card dealing function provided in the example code so that a poker hand is dealt. You should be able to use this function to deal and draw any number of cards.
(e) (5 pts) Write a function to determine if the hand contains a pair.
(f) (5 pts) Write a function to determine if the hand contains two pairs.
(g) (5 pts) Write a function to determine if the hand contains three of a kind (e.g. three jacks).
(h) (5 pts) Write a function to determine if the hand contains four of a kind (e.g. four aces).
(i) (5 pts) Write a function to determine if the hand contains a flush (i.e. all five cards of the same suit).
(j) (5 pts) Write a function to determine if the hand contains a straight (i.e. five cards of consecutive face values).
(3) (20 pts) Simulate the dealer. The dealer's five-card hand is dealt "face down" so the player cannot see it. The program should then evaluate the dealer's hand, and based on the quality of the hand, the dealer should draw one, two, or three more cards to replace the corresponding number of unneeded cards in the original hand. The program should then re-evaluate the dealer's hand.
(4) (15 pts) Make the program handle the dealer's five-card hand automatically. The player should be allowed to decide which cards of the player's hand to replace. The program should then evaluate both hands and determine who wins. The game should be played until the user wants to exit.
You may make any adjustments or customizations to your Poker game that you wish!!! Have fun with this assignment!!!
Example code to start with:
// Authors: Deitel & Deitel - C How to Program
#include
#include
#include
void shuffle (int wDeck[][13]);
void deal (const int wDeck[][13], const char *wFace[], const char *wSuit[]);
int main (void)
{
/* initialize suit array */
const char *suit[4] = {"Hearts", "Diamonds", "Clubs", "Spades"};
/* initialize face array */
const char *face[13] = {"Ace", "Deuce", "Three", "Four", "Five", "Six", "Seven", "Eight",
"Nine", "Ten", "Jack", "Queen", "King"};
/* initalize deck array */
int deck[4][13] = {0};
srand ((unsigned) time (NULL)); /* seed random-number generator */
shuffle (deck);
deal (deck, face, suit);
return 0;
}
/* shuffle cards in deck */
void shuffle (int wDeck[][13])
{
int row = 0; /* row number */
int column = 0; /*column number */
int card = 0; /* card counter */
/* for each of the 52 cards, choose slot of deck randomly */
for (card = 1; card <= 52; card++)
{
/* choose new random location until unoccupied slot found */
do
{
row = rand () % 4;
column = rand () % 13;
} while (wDeck[row][column] != 0);
/* place card number in chosen slot of deck */
wDeck[row][column] = card;
}
}
/* deal cards in deck */
void deal (const int wDeck[][13], const char *wFace[], const char *wSuit[])
{
int row = 0; /* row number */
int column = 0; /*column number */
int card = 0; /* card counter */
/* deal each of the 52 cards */
for (card = 1; card <= 52; card++)
{
/* loop through rows of wDeck */
for (row = 0; row <= 3; row++)
{
/* loop through columns of wDeck for current row */
for (column = 0; column <= 12; column++)
{
/* if slot contains current card, display card */
if (wDeck[row][column] == card)
{
printf ("%5s of %-8s%c", wFace[column], wSuit[row], card % 2 == 0 ? '\n' : '\t');
}
}
}
}
}

Answers

To declare a struct called Card that contains two integers:

One for the face value of the card and one for the suit.

To declare a struct called Hand that contains an array of 5 Card structs.

To complete the game of 5-card-draw poker, the following steps need to be taken:

(a) Declare a struct called Card that contains two integers.

One integer represents the index of where to find the face value of the card in the array of strings, and the other integer represents the index of where to find the suit of the card in the other array of strings.

struct Card {

   int faceIndex;

   int suitIndex;

};

(b) Declare a struct called Hand that contains an array of 5 struct Cards.

struct Hand {

   struct Card cards[5];

};

(c) Create a menu to that allows the user to view the game rules, play the game, and exit the game.

void printMenu() {

   printf("Welcome to 5-Card-Draw Poker!\n");

   printf("1. View Game Rules\n");

   printf("2. Play Game\n");

   printf("3. Exit\n");

   printf("Enter your choice: ");

}

(d) Modify the card dealing function provided in the example code so that a poker hand is dealt.

You should be able to use this function to deal and draw any number of cards.

void dealHand(const int wDeck[][13], struct Hand *hand) {

   int row = 0;

   int column = 0;

   int card = 0;

   int cardCount = 0;

   for (card = 1; card <= 5; card++) {

       do {

           row = rand() % 4;

           column = rand() % 13;

       } while (wDeck[row][column] == 0);

       hand->cards[cardCount].faceIndex = column;

       hand->cards[cardCount].suitIndex = row;

       wDeck[row][column] = 0;

       cardCount++;

   }

}

(e) A function to determine if the hand contains a pair.

int containsPair(struct Hand *hand) {

   int i, j;

   for (i = 0; i < 5; i++) {

       for (j = i + 1; j < 5; j++) {

           if (hand->cards[i].faceIndex == hand->cards[j].faceIndex) {

               return 1;

           }

       }

   }

   return 0;

}

(f) Write a function to determine if the hand contains two pairs.

int containsTwoPair(struct Hand *hand) {

   int i, j, pairs = 0;

   for (i = 0; i < 5; i++) {

       for (j = i + 1; j < 5; j++) {

           if (hand->cards[i].faceIndex == hand->cards[j].faceIndex) {

               pairs++;

               if (pairs == 2) {

                   return 1;

               }

           }

       }

   }

   return 0;

}

(g) Write a function to determine if the hand contains three of a kind (e.g. three jacks).

int containsThreeOfAKind(struct Hand *hand) {

   int i, j, k;

   for (i = 0; i < 5; i++) {

       for (j = i + 1; j < 5; j++) {

           for (k = j + 1; k < 5; k++) {

               if (hand->cards[i].faceIndex == hand->cards[j].faceIndex && hand->cards[j].faceIndex == hand->cards[k].faceIndex) {

                   return 1;

               }

For similar questions on Card

https://brainly.com/question/30700350

#SPJ11

For this assignment, you need access to a computer running Windows 7, Windows 10 or a current operating system. Create a folder that contains two subfolders and five files of different types. Each subfolder should have at least three files. Apply each of the NTFS standard permissions to the first folder you created, and allow the permissions to be inherited. Record and report the effects of each change.

Answers

To complete the assignment, you need access to a computer running Windows 7, Windows 10, or a current operating system. Create the folder structure as instructed.

How can I complete the assignment of creating folders, subfolders, and files with different permissions in Windows?

To complete the assignment, you need a computer running Windows 7, Windows 10, or a current operating system.

Create a folder on your computer and name it as desired. Inside this folder, create two subfolders and five files of different types, such as text documents, images, or spreadsheets.

Each subfolder should contain at least three files. Once the folder structure is set up, right-click on the first folder and select "Properties." In the "Security" tab, click on "Edit" and apply each of the standard NTFS permissions (such as Full Control, Read, Write, etc.) to different user accounts or groups.

Enable the option to allow permissions to be inherited from the parent folder. Take note of the effects of each permission change, such as the ability to view, edit, or delete files, and document them for reporting purposes.

Learn more about assignment

brainly.com/question/30407716

#SPJ11

active directory metadata describes the actual active directory data. T/F

Answers

Active Directory metadata is information stored in the Active Directory database that describes the structure, objects, and attributes within the directory, allowing for efficient management and organization of resources and security policies. False.

Active Directory metadata does not describe the actual Active Directory data. Instead, it provides information about the structure, configuration, and state of the Active Directory itself. Metadata includes details about domain controllers, replication topology, schema version, object attributes, security permissions, and other administrative information related to the Active Directory infrastructure.

Learn more about Active Directory metadata here:

https://brainly.com/question/30781381

#SPJ11

Find values of Boolean Expre Find the values of the following expressions: _a) 1 . 0 = _b) 1 + 1 =_c) 0 . 0 = ____d) (1 + 0) = .

Answers

Boolean expressions are statements that can only be true or false. Value of  1 . 0 =0. Value of 1 + 1 = 1. Value of 0 . 0 = 0. Value of (1 + 0) = 1.

Now let's consider the expressions given in your question.

a) 1 . 0 =

The dot (.) symbol represents the logical operator AND. This means that the expression 1 . 0 evaluates to false, since both operands (1 and 0) cannot be true at the same time. Therefore, the value of this expression is 0.

b) 1 + 1 =

The plus (+) symbol represents the logical operator OR. This means that the expression 1 + 1 evaluates to true, since at least one of the operands (1 or 1) is true. Therefore, the value of this expression is 1.

c) 0 . 0 =

The expression 0 . 0 also evaluates to false, since both operands (0 and 0) are false. Therefore, the value of this expression is 0.

d) (1 + 0) =

This expression is incomplete, as there is no logical operator specified. However, assuming that the operator is the equality symbol (=), the expression (1 + 0) = evaluates to true, since both sides are equal. Therefore, the value of this expression is 1.

In summary, Boolean expressions are used to represent logical operations and return values of true (1) or false (0). By understanding the logical operators and their meanings, we can easily evaluate Boolean expressions and use them to control program flow.

To learn more about boolean: https://brainly.com/question/2467366

#SPJ11

T/F : a successful hijacking takes place when a hacker intervenes in a tcp conversation and then takes the role of either host or recipient.

Answers

False.

A successful hijacking, also known as a TCP session hijacking or TCP session hijack attack, occurs when an attacker intercepts an established TCP connection between a host and a recipient without their knowledge or authorization.

The attacker does not necessarily take the role of either the host or the recipient but instead gains unauthorized access to the ongoing TCP session. During a TCP session hijack attack, the attacker can manipulate or inject malicious data into the communication stream, eavesdrop on the conversation, or potentially impersonate one of the parties involved. The goal is to gain control over the session and potentially exploit the compromised connection for unauthorized actions.

Learn more about TCP session hijacking here:

https://brainly.com/question/31601873

#SPJ11

A virtual memory has a page size of 1024 words, eight virtual pages, and four physical page frames (A physical page and a virtual page have the same size.). The page table is as follows: (25 poin.) Virtual page Page frame 0 Not in main memory Not in main memory 4 Not in main memory 0 Not in main memory Make a list of all virtual addresses that will cause page faults.

Answers

Virtual memory uses a paging system to map virtual addresses to physical addresses. In this scenario, there is a page size of 1024 words, eight virtual pages, and four physical page frames. The given page table is incomplete, so it is not possible to provide the exact virtual addresses that will cause page faults. However, I can explain the concept of page faults and how to identify them in general.

A page fault occurs when a virtual address refers to a page that is not currently in the main memory (physical page frame). Instead, it is stored in the secondary storage, like a hard disk. The system must retrieve the page from secondary storage and place it in the main memory before the requested data can be accessed. This process causes a delay in accessing the data, which is called a page fault.To determine the virtual addresses that will cause page faults, you need to examine the page table. For each virtual address, you need to check whether the corresponding virtual page is mapped to a physical page frame or not. If the virtual page is not in the main memory, as indicated in the page table, any virtual address within that page will cause a page fault.In this case, virtual pages 0 and 4 are specifically mentioned as not being in main memory. So, any virtual addresses within these pages would cause a page fault. To find the range of addresses, you can multiply the virtual page number by the page size (1024 words). For example, virtual page 0 would have addresses from 0 to 1023, and virtual page 4 would have addresses from 4096 to 5119.Without a complete page table, it is not possible to provide a list of all virtual addresses that will cause page faults. However, this explanation should help you understand the concept of page faults and how to identify them based on the available information.

Learn more about Virtual here

https://brainly.com/question/13269501

#SPJ11

csma/cd is used at the data-link layer for passing data on an ethernet network. it helps to regulate this function. TRUE/FALSE

Answers

This statement is true because CSMA/CD plays a crucial role in regulating the transmission of data on an Ethernet network, ensuring efficient and reliable communication by managing access to the shared communication medium.

What is Carrier Sense Multiple Access with Collision Detection?

Carrier Sense Multiple Access with Collision Detection (CSMA/CD) is a protocol used at the data-link layer of the Ethernet network to regulate and manage the transmission of data. CSMA/CD helps to avoid and detect collisions that can occur when multiple devices on the network attempt to transmit data simultaneously.

CSMA/CD works by requiring devices to listen and sense the network before transmitting. If the network is idle, the device can transmit its data. However, if the device detects that another device is already transmitting, it waits for the ongoing transmission to finish before attempting to transmit its data. This helps to regulate and prevent data collisions.

In the event that two devices transmit data simultaneously and a collision occurs, CSMA/CD provides collision detection mechanisms. When a collision is detected, both devices stop transmitting, wait for a random backoff period, and then retry the transmission.

Therefore, CSMA/CD plays a crucial role in regulating the transmission of data on an Ethernet network, ensuring efficient and reliable communication by managing access to the shared communication medium.

Learn more about CSMA/CD

brainly.com/question/13260108

#SPJ11

___ is a type of malware which is designed to report activity on your computer to another party.

Answers

Spyware is a type of malware which is designed to report activity on your computer to another party.

It is specifically designed to gather information from your computer and report it back to a third party, without your knowledge or consent. It is important to have anti-malware software installed on your computer to protect against these types of threats. Additionally, if you suspect that your computer has been compromised, it is important to report it to a trusted IT professional or security team. Spyware secretly monitors and collects user information, such as browsing habits, and sends this data to a third party without the user's consent. This can lead to privacy issues and potentially identity theft.

To know more about Malware, visit the link : https://brainly.com/question/28910959

#SPJ11

addProduct- Notice that addProduct in the Warehouse class has been implemented in 3 pieces, and you are responsible for filling in each of the 3 pieces.- The method is designed to be incrementally tested. As you fill in each piece, the method takes on additional behavior.- The code you write in AddProduct.java to test the first piece will work unchanged to test your method after the second and then the third pieces are implemented. We provide multiple input files for you to test each of the 3 pieces of the addProduct() method.

Answers

The addProduct() method in the Warehouse class has been implemented in 3 pieces, and as the coder, you are required to fill in each of these 3 pieces.

This method is designed to be incrementally tested, meaning that as you fill in each piece, the method will take on additional behavior. You will need to test each piece of the method separately using the provided input files.

The addProduct() method in the Warehouse class is a complex method that requires careful implementation. To ensure that the method works correctly, it has been split into 3 pieces, and you are responsible for filling in each of these pieces. The method is designed to be incrementally tested, which means that you will need to test each piece of the method separately. As you fill in each piece, the method will take on additional behavior. This approach allows you to verify that each piece of the method works as expected before moving on to the next piece.  When testing the method, you should use the multiple input files provided to you. These files are designed to test each of the 3 pieces of the addProduct() method. The code you write to test the first piece will work unchanged to test your method after the second and then the third pieces are implemented.  In conclusion, implementing the addProduct() method in the Warehouse class requires careful attention to each of the 3 pieces. By testing each piece separately and using the provided input files, you can ensure that the method works correctly.

To know more about warehouse visit:

https://brainly.com/question/30050363

#SPJ11

Other Questions
Which of the following interactions is primarily responsible for stabilizing the double-helical structure of DNA? A. Hydrogen bonds between purine and pyrimidine bases. B. Base-stacking interactions between adjacent bases. C. Electrostatic interactions between the phosphate groups of two adjacent strands. D. Covalent bonds between the 3' end of one strand and the 5' end of the other. E. None of the above WILL MARK BRAINLIEST, IF HELPFUL examine the map showing air pressure in millibars. which of the four lettered locations deserves a wind hazard alert? Give the first six terms of the following sequences.(a) The first term is 1 and the second term is 2. The rest of the terms are the product of the two preceding terms.(b) a1 = 1, a2 = 5, and an = 2an-1 + 3 an-2 for n 2.(c) g1 = 2 and g2 =1. The rest of the terms are given by the formula gn = ngn-1 + gn-2. In the text, we argued that it's easy to delegate using capabilities. a. It is also possible to delegate using ACLs. Explain how this would work. b. Suppose Alice delegates to Bill who then delegates to Charlie who, in turn, delegates to Dave. How would this be accomplished using capabilities? How would this be accomplished using ACLs? Which is easier and why? c. Which is better for delegation, ACLs or capabilities? Why? Find a parametrization of the surface. The first-octant portion of the conez= sqt (xsq +ysq) /2between the planes z = 0 and z = 3. What are you chasing in this life?What is it that gets you out of bed on the morning?What is that deep driving force that pushes you to keep going when circumstances whisperquit?Gays by the Great could tell you his answer.At the end of chapter one,he reaches his hand toward a green light across the bay;this light represents his goal in this life.Please write 2 Paragraphs(minimum)explains your personalGreen Light It can be anything you are pursuing,but i encourage you to think big. Franky believes that there should be no trade restrictions for any reason. What effect would frankly say that trade restrictions have on prices?a. Hew would argue that by encouraging competition with trade restrictions, prices are likely to decrease b. He would argue that restrictions would cause greater competition and therefore lead to higher prices c. He would say that trade restriction's have no impact on prices, but they do restrict consumer choiced. He would say that restrictions reduce competition and therefore cause an increase in pricese. He would argue that trad restrictions increase prices because they break up domestic monopolies Two honey bees X and Y leave the hive H at the same time X flies 29m due south and Y flies 11m on a bearing of 113 degree. How far apart are they A point particle with charge q is placed inside a cube but not at its center. The electric flux through any one side of the cube:) is zeroB) is q/e0C) is q/4e0D) is q/6e0E) cannot be computed using Gauss' law An account paying 4. 6% interest compounded quarterly has a balance of $506,732. 32. Determine the amount that can be withdrawn quarterly from the account for 20 years, assuming ordinary annuity. A. $9,722. 36 b. $6,334. 15 c. $23,965. 92 d. $7,366. 99. 1. Statistics from Cornells Northeast Regional Climate Center indicate that Ithaca, NY, gets an average of 35.4" of rain each year, with a standard deviation of 4.2". Assume that a Normal model applies. (Problem from Intro Stats by De Veaux, Velleman, Bock 3rd Edition)a. During what percentage of years does Ithaca get more than 40" of rain?b. Less than how much rain falls in the driest 20% of all years?c. A Cornell University student is in Ithaca for 4 years. Let represent the mean amount of rain for those 4 years. Describe the sampling distribution model of this sample mean, Be sure to check assumptions and conditions.d. Whats the probability that those 4 years average less than 30" of rain? Do our intestines contain germs? which virus detection method creates a virtual environment that simulates the central processing unit (cpu) and memory of the computer? a. dynamic scanningb. static analysisc. string scanningd. code emulation two moles of an ideal gas occupy a volume v. the gas expands isothermally and reversibly to a volume 5 v. When a company switches from the three-sigma quality control model to the six-sigma quality control model, it is _____.Question 10 options:decreasing the standard deviation of the manufacturing processes from one-sixth to one-twelfth of the spacing between USL and LSLincreasing the spacing between USL and LSL from three to six standard deviations of the manufacturing processesincreasing the spacing between USL and LSL from six to 12 standard deviations of the manufacturing processesdecreasing the standard deviation of the manufacturing processes from one-third to one-sixth of the spacing between USL and LSL A company's gross profit (or gross margin) was $83,750 and its net sales were $347,800. Its gross margin ratio is: Multiple Choice 4.2% 24.1% 75.9%. $83.750. Consider the reaction:N2 (g) + O2(g) -> NO(g)Calculate the values of deltarS for the reaction mixture, surroundings, and the universe at 298K. Why is your result reassuring to Earth's inhabitants? let u = {8, 9, 10, 11, 12, 13, 14}, a = {8, 9, 10, 11}, b = {8, 9, 12, 13}, and c = {10, 12, 14}. list all the members of the given set. (enter your answers as a comma-separated list.) (a b) c consider x=h(y,z) as a parametrized surface in the natural way. write the equation of the tangent plane to the surface at the point (5,2,1) given that hy(2,1)=5 and hz(2,1)=2.