You attempt to use your multimeter to measure the electric potential difference, but the value stays at 0.00 V no matter what you do and there is an H on the screen. What's going on?
a. The multimeter is probably broken and you should give it to your instructor/TA.
b. You probably plugged in the wires incorrectly. Try using the 10A and V ports.
c. Someone pressed the "Hold" button. If you press it again, the multimeter should work correctly.
d. Someone pressed the "Handheld" button. The multimeter will only work if you hold it in your hand while using it.

The coefficient of friction between the box and the floor is approximately 0.852.

Force is a concept in physics that refers to a push or pull upon an object that results in a change in the object's motion. Forces can cause objects to accelerate, change direction, or change shape. In physics, a force is a vector quantity, meaning it has both magnitude and direction.

Forces can be caused by many factors, including gravity, electromagnetic fields, and the interaction between objects. They can be measured in units of Newtons (N), and the effects of forces can be described by Newton's laws of motion, which explain how objects will respond to different forces.

The coefficient of friction (μ) can be calculated using the formula:

μ = Friction force / Normal force

where the friction force is equal to the applied force minus the force due to gravity on the box:

Friction force = Applied force - Force due to gravity

The force due to gravity on the box is given by:

Force due to gravity = weight of box = 43.2 N

So, substituting these values, we get:

μ = (Applied force - 43.2 N) / 43.2 N

μ = (6.30 N - 43.2 N) / 43.2 N

μ = -36.9 N / 43.2 N

μ = -0.852

Since the coefficient of friction can only be positive, the negative sign indicates that the direction of the friction force is opposite to that of the applied force.

Therefore, the coefficient of friction between the box and the floor is approximately 0.852.

To know more about friction visit:

https://brainly.com/question/31226

#SPJ1

The time it takes for radio signals to travel from Earth depends upon the distance they are traveling to. Radio signals travel at the speed of light, which is roughly 299,792,458 meters each second.

In this way, to compute the time it would take for a radio transmission to travel a specific distance, you would isolate the distance by the speed of light which is about 3 x 108 m/s

For example, if the radio transmission is traveling to a planet that is 40 million kilometers away, it would require the radio transmission roughly 133.3 seconds to arrive.

To learn more about radio signals:

https://brainly.com/question/69373

#SPJ4

The pressure at the bottom of the 170-cm-thick water layer is 17,000 Pa.

The pressure at the bottom of the water layer can be calculated using the formula for pressure due to a fluid column:

P = ρgh

where P is the pressure, ρ is the density of the fluid, g is the acceleration due to gravity, and h is the height of the fluid column.

Since water has a density of about 1000 kg/m^3, the pressure at the bottom of the 170-cm-thick water layer is given by:

P = 1000 kg/m^3 * 9.8 m/s^2 * (170 cm / 100 cm/m)

P = 17,000 Pa

You can learn more about pressure  at

https://brainly.com/question/28012687

#SPJ4

The speed of the lander just before it touches the surface will be the highest it has been during its descent.

The speed of the lander just before it touches the surface can be calculated using the equation: v = √(2gh), where g is the acceleration due to gravity on the moon (1.6 m/s^2), h is the height above the surface, and v is the velocity.

Assuming h is a constant value, the velocity of the lander can be calculated as the square root of two times the acceleration due to gravity multiplied by the height. This equation is known as the equation of motion and is used to calculate the velocity of an object in free fall. It is important to note that the velocity will increase as the height decreases, so the speed of the lander just before it touches the surface will be the highest it has been during its descent.

Learn more about acceleration  :

https://brainly.com/question/605631

#SPJ4

(a) The potential energy of a 100 g steel ball that falls from a height of 1. 8m on to a metal plate and rebounds to a height of 1. 25 m. before the fall = 1.8 Joules

(b) The kinetic energy as it hits the plate = 1.8 Joules

(c) The velocity on hitting the plate = 6 m/s

(d) The kinetic energy as it leaves the plate on the rebound = 5 m/s

To determine the potential energy, use the equation:

PE = mgh

Where:

m = mass of the object (kg)

g = acceleration due to gravity (10 m/s²)

h = height (m)

Hence,

(a)

The potential energy:

PE = mgh

= (0.1) (10) (1.8

= 1.8 Joules

(b)

The kinetic energy as it hits the plate:

KE = PE

KE = 1.8 Joules

(c)

The velocity on hitting the plate:

KE = [tex]\frac{1}{2}[/tex] mv²

1.8 =  [tex]\frac{1}{2}[/tex] (0.1)v²

v = 6 m/s

(d)

The kinetic energy as it leaves the plate on the rebound:

PE = mgh

= (0.1) (10) (1.25)

= 1.25

KE = [tex]\frac{1}{2}[/tex] mv²

1.25 = [tex]\frac{1}{2}[/tex] (0.1) v²

v = 5 m/s

Learn more about potential energy here: https://brainly.com/question/30364759

#SPJ4

The container kept on the terrace of the taller building will have the highest level of water.

The level of water in a container depends on atmospheric pressure, and the atmospheric pressure decreases with height.

Atmospheric pressure, also known as air pressure, is the force exerted by the weight of air molecules in the atmosphere. It is measured in units of force per unit of area, typically in kilopascals (kPa) or pounds per square inch (psi).

Atmospheric pressure decreases with increasing altitude, as there are fewer air molecules above the earth's surface. At sea level, the average atmospheric pressure is approximately 101.3 kPa (14.7 psi), while at high elevations it can be significantly lower.

The taller building is higher up, so the atmospheric pressure on its terrace is lower than that at ground level, resulting in a lower water level in the container kept there.

The water level in the container kept on the terrace of the shorter building and the one kept in an open space will be at the same height, as they are both at ground level and have the same atmospheric pressure.

Therefore, The container kept on the terrace of the taller building will have the highest level of water.

To know more about atmospheric pressure refer to:

brainly.com/question/28310375

#SPJ4

The graph of x-t for the motion of the bumper between t=0 and t=2.00s is a straight line that starts at the origin (x = 0, t = 0) and ends at (x = 2, t = 2). This shows that the bumper moves with a constant speed of 2 m/s.

A graph is a visual representation of data or information. It typically includes a set of points that are connected by lines or curves to form a picture. Graphs are used to easily visualize trends, compare values, and show relationships between different data sets. They provide an effective way to communicate information to a wide range of audiences. Graphs can be used to illustrate almost any type of data, from population trends to stock market fluctuations.

This graph can be interpreted as follows: the bumper starts from rest (x = 0) at t = 0 and travels a distance of 2 meters in 2 seconds, meaning it has a constant velocity of 2 m/s. The slope of the line is equal to the velocity of the bumper, so m = 2 m/s. This means that for every 1 second that passes, the bumper moves 2 meters.

To learn more about graph

https://brainly.com/question/13877898

#SPJ4

If the skier hits a snowdrift and stops in 0.30 s, She would go into the drift to 2.25 m. The average force that she will strike the drift is 3250 N.

The speed at which an object's location changes in any direction. The distance traveled in relation to the time it took to travel that distance is how speed is defined.

a = -15 / 0.3 = -50 m/s2

v2 - v02 = 2ax

- 152(-50)x == > x = 2.25 m

F = ma = 65 x 50 = 3250 N

Therefore, a. She would go into the drift to 2.25 m.

b. The average force that she will strike the drift is 3250 N.

To learn more about speed, refer to the link:

https://brainly.com/question/7359669

#SPJ1

The most common measurement used to record heat transfer in a classroom investigation is a calorimeter.

A calorimeter is a device used to measure the amount of heat transferred to or from a substance during a chemical or physical reaction. It is commonly used in the classroom setting for experiments that involve the transfer of heat energy. The basic design of a calorimeter consists of an insulated container that holds the substance and a thermometer or temperature probe to measure the temperature change of the substance.

The insulation helps to reduce heat loss to the surrounding environment, which makes the measurement of heat transfer more accurate. Calorimeters can be used to determine the specific heat capacity of a substance, to measure the heat of reaction in a chemical reaction, or to measure the heat transfer between two substances of different temperatures. The results of these experiments can be used to calculate the amount of energy transferred and to determine the energy changes that occur during chemical reactions.

You can learn more about calorimeter at

https://brainly.com/question/1407669

#SPJ4

The pressure of the helium inside a toy balloon in kpa is calculated to be 166770 kPa.

Pressure of helium = 1250 mm Hg

Converting into m Hg, we have,

p he = 1250/1000 = 1.25 m Hg

From the physical properties of Hg, we know,

ρ Hg = 13.6 g/cm³ = 13600 kg/m³

Gravity of the earth = 9.8 m/s²

The helium pressure inside a toy balloon is, in kPa,

p he = ρ g h = 13600 ×9.81 × 1.25 = 166770 kPa

Thus, the required pressure of the helium inside a toy balloon in kpa is calculated to be 166770 kPa.

To know more about pressure:

https://brainly.com/question/12983847

#SPJ4

The distance between two adjacent nodes of the wave is determined as 8.04 m.

The distance between two adjacent nodes of the wave is calculated by applying the following formula;

Node to Node = λ/2

Node to Node = length of the string = 4.02 m

where;

The distance between two adjacent nodes of the wave is calculated as;

λ/2 = L

λ = 2L

λ = ( 2 )  x ( 4.02 m )

λ = 8.04 m

Learn more about wavelength here: https://brainly.com/question/10728818

#SPJ1

The downward force caused by gravity will be the same as the normal force, that is the power of the elevators on this child's shoes. So, 98 newtons will be the typical force in this situation.

What does force in physics mean?

You can also use words like stretch and compress to describe force. Force is described in physics as the pull or push that causes a massed object to change its speed. Force is an outside agent that has the power to alter a body's resting or moving position.

What is a good instance of force?

When applied, force is an outside factor that modifies or tends to modifies a body's condition; if indeed the body is moving

To know more about force visit:

https://brainly.com/question/13191643

#SPJ4

In summation, the balloon's motion may be defined as an entity undergoing steady downward acceleration, with a starting velocity of zero and rising velocity as time passes.

The motion of the balloon may be characterized using kinematic principles of velocity and acceleration when it is pushed back to the halfway between the wall and the sweater and then released. The balloon has an initial velocity of zero, v0 = 0, at the instant of release. The gravitational force pressing on it causes it to accelerate downwards. The balloon's acceleration may be described as the acceleration owing to gravity, a = 9.8 m/s2. As time passes, the balloon's velocity rises due to its acceleration. The balloon's velocity may be calculated using the equation v = v0 + at, where t denotes time. The balloon's location may be characterized by the equation x = x0 + v0t + (1/2)at2, where x0 represents the balloon's original position. The balloon's velocity will grow during its travel, reaching its maximum value at the instant it hits its lowest point. Because the balloon is only being affected upon by the constant force of gravity, its acceleration will remain constant.

Here,

In summary, the motion of the balloon can be described as an object undergoing constant acceleration in the downward direction, with an initial velocity of zero and increasing velocity as time progresses.

To know more about motion,

https://brainly.com/question/13966796

#SPJ4

The value of velocity at t = 9 when the equation of motion is given is calculated to be -1.0123.

The given function is f(t) = (t^-1) - t, it is an equation of motion.

On derivation of the equation of motion, we get the equation of velocity.

Taking derivative on both the sides of the function,

f'(t) = d/dt[(t^-1) - t)] = d/dt(t^-1) - d/dt(t)

f'(t) = -1(t^-2) -1

f'(t) = -t^-2 - 1

f'(t) = v(t),

It can be also written as,

-1/t^2 - 1

To find out the velocity at t = 9, place the value in the above equation.

So, v(9) = -1/(9^2) - 1 = -1/81 - 1 = -0.0123-1 = -1.0123

The given question is incomplete. The complete question contains 'f(t) = (t ^-1) - t.'

To know more about equations:

https://brainly.com/question/1621278

#SPJ4

The stony moon of Jupiter With hundreds of eruptions, some of which are spouting lava fountains that are a few kilometers (or kilometers) high, Io is the solar system's largest volcanically active planet.

By far the biggest world in the solar system, Jupiter is more than times as large than all of the other planet put altogether. Jupiter is the sixth planet from our Sun. The swirls and patterns of Jupiter are really urea and water clouds floating in a helium- and hydrogen-rich atmosphere.

The clouds tops are thought to be roughly -280 degrees Fahrenheit frigid. The overall temperature of Mars is -238 degrees Fahrenheit. Jupiter's pole is only little more than 3 degrees inclined, therefore

To know more about Jupiter visit:

https://brainly.com/question/10776461

#SPJ4

Answer:

the driver need to stop before he drive

Explanation:

if he keep driving he will hit a car

A radio wave's frequency is the number of cycles it completes in one second, and is measured in hertz (Hz).

One cycle of a radio wave is the time it takes for the wave to complete a cycle of its waveform, from the peak to the trough, and back to the peak again. A radio wave's frequency is the number of cycles it completes in one second, and is measured in hertz (Hz). For example, a radio wave with a frequency of 1 MHz (one million hertz) will have a cycle time of 1 microsecond (one millionth of a second).

The cycle time of a radio wave is the inverse of its frequency, and represents the time it takes for the wave to complete one full cycle of its waveform, from peak to trough and back to peak again. The higher the frequency, the shorter the cycle time, and vice versa.

To know more about frequency please refer:

https://brainly.com/question/2140860

#SPJ4

The electric field at the midpoint between the two charges each of 30 μC, is zero.

Charge q₁ = +30 μC

Charge q₂ = +30 μC

Distance between both the charges, d = 4 cm

Midpoint will be 2 cm from each charge. so r = 2 cm

We know the electric filed produced by a charge, at a distance of d is formulated as, E = q/(4πε₀r²)

Where q is the charge, ε₀ is the constant of permittivity of vacuum.

Let 1/(4πε₀) = k, then E = kq/r²

Electric field due to first charge at 2 cm from it, E₁ = (k × 30)/2²

Similarly, electric field due to second charge at 2 cm from it, E₂ = (k × 30)/2²

E = E₁ - E₂

E = (k × 30)/2² - (k × 30)/2²

E = 0

To know more about electric field, here

https://brainly.com/question/15800304

#SPJ4

The correct statement is: Angular motion of joints produces the linear motion of walking.

Displacement – In linear motion, we use ‘s’ to quantify the linear distance travelled. In angular motion, we use ‘θ’ for the same to quantify the angular distance, and it is measured in radians.

Velocity – In linear motion, we use ‘v’ to denote velocity while in angular motion, we use ‘ω’ to indicate angular velocity. Angular velocity is the number of radians covered per second.

Acceleration – We use ‘a’ to denote linear acceleration, while we use ‘α’ to mean angular acceleration. The unit of angular acceleration is radians per second square

To know more about motion visit:

https://brainly.com/question/14979994

#SPJ4.

Your spectroscope must be calibrated in order to account for systematic inaccuracy.  The helium discharge tube is a handy source of emission lines.

Spectrometers will inevitably drift over time as a result of impacts and effects from the environment. Regular wavelength calibration, which helps to assure accurate and dependable spectroscopic data, can readily address this prevalent problem. The wavelength calibration verifies that the grating's angular position setting and the wavelengths assigned to each pixel on the CCD array detector are correct. By analysing the spectra of an orange glass and a suspension of microalgae, the process is demonstrated.

This is accomplished by comparing the wavelengths you empirically determined to wavelengths discovered via research in the literature.

Learn more about the Spectrometer here: https://brainly.com/question/1852056

#SPJ4

The electric field at the center of the charged semicircular loop (point P) is given by: E = (k × Q) / (2 × a) × (i + j + k).

The electric field is a measure of the electric force exerted by a charged object on other charged objects in its vicinity. It is a vector quantity that specifies the direction and magnitude of the force that would be experienced by a unit positive charge placed in that field.

The electric field at the center of a charged circular loop can be calculated using the following steps:

Divide the loop into small charge elements dq, each at an angle dθ from the center of the loop (point P).

The electric field due to each small charge element dq at point P is given by:

dE = (k × dq × r) / (r²),

where k is Coulomb's constant, r is the distance from the charge element dq to point P, and r² = a² + (a × dθ)²

Integrating the above expression over the entire loop (from θ = 0 to θ = π), we get the total electric field at point P:

E = k × Q × (∫(a / (a² + (a × dθ)²) × dθ) from 0 to π)

Evaluating the above integral, we get:

E = (k × Q × a) / (2 × a) = (k × Q) / (2 × a)

Therefore, the electric field at the center of the charged semicircular loop (point P) is given by:

E = (k × Q) / (2 × a) × (i + j + k), where i, j, k are the unit vectors in the x, y, and z directions respectively.

To know more about electric force, visit:

https://brainly.com/question/20935307

#SPJ4

On both the the celsius and kelvin temperature scales, 100 degrees is the difference between  normal freezing and boiling points of water.

Boiling point

The temperature at which a fluid bubbles and goes to fume for example significantly alters its state at climatic strain is known as the edge of boiling over of the fluid.

We know that on celsius scale,freezing temperature of water is =0°C

and,boiling point of water is =100°C

Similarly,freezing point of water in kelvin scale=273K

and boiling point of water in kelvin scale=373K.

So,difference between normal freezing point of water and boiling point of water=100-0=100°C

Hence,difference is of 100°C in both kelvin and degree scale.

To know more about temperature,visit here:

https://brainly.com/question/14132731

#SPJ4

The required magnitude of a vertical electric field that will just barely counterbalance the weight of a plastic bead is calculated to be 15.42 × 10³ C.

The mass of the bead is given as, m = 2.2 g = 2.2 × 10⁻³ kg

The charge on the bead q = 1.4 μc = 1.4 × 10⁻⁶ c

Magnitude of vertical electric field = ?

The electric field's force on the charged plastic sphere equals q E.

The plastic spherical is m g in weight.

where, g is the acceleration due to gravity

Now the force due to electrostatic field is balanced by the weight of the plastic sphere.

q E = m g

E = m g / q

E = (2.2 × 10⁻³)(9.81)/(1.4 × 10⁻⁶) = (2.2 × 9.81 × 10³)/1.4 = 15.42 × 10³ C

To know more about electric field:

https://brainly.com/question/12972779

#SPJ4

Volume and mass The sun has a total volume of 1.4 x 10 28 cubic meters. According to NASA data, 1.3 million Earths might fit inside the sun.

How does physics define mass?

It is the most fundamental characteristic of matter and one of the basic quantities in physics. Mass is a term used to describe how much matter is there in a body. The kilogram is the SI mass unit. (kg). A body's mass does not alter at any point in time. only in rare instances where a significant quantity of energy is supplied to or taken away from a body.

How is mass determined?

Mass can be calculated using the formula: mass = volume density. Weight serves as a gauge for gravitational force.

To know more about mass visit:

https://brainly.com/question/18064917

#SPJ4

Centripetal acceleration of the cyclist is 8.04 m/s^2, while the moving speed of the cyclist is 15.0m/s.

The centripetal acceleration of an object moving in a circle with a radius "r" and velocity "v" can be calculated using the following formula:

a = v^2 / r

where "a" is the centripetal acceleration.

Given the speed of the cyclist

(v) = 15.0 m/s and

the radius of the bend (r) = 28.0 m,

the centripetal acceleration can be calculated as follows:

= a

= v^2 / r

= (15.0 m/s)^2 / 28.0 m

= 225 m^2/s^2 / 28 m

= 8.04 m/s^2

So the centripetal acceleration of the cyclist is 8.04 m/s^2.

To know more about acceleration please refer: https://brainly.com/question/12550364

#SPJ4

Net work done on the object -16J.

Net work done on the object = Force x Distance

Force = mass x acceleration = 1 kg x (-4 m/s) = -4 N

Distance = Change in velocity x time = (4 m/s - 0 m/s) x 1 s = 4 m

Net work done on the object = Force x Distance

= -4 N x 4 m

= -16 J

What is work done?

Work done is the amount of energy expended to move an object a certain distance. It is calculated by multiplying the force applied to the object by the distance it is moved. Work is measured in Joules (J).

Therefore, Net work done on the object -16J.

To learn more about work done

https://brainly.com/question/16976412

#SPJ4

The resulting charge on A is [tex]1.6 x 10^-7[/tex] C, and the resulting charge on B is [tex]-3.2 x 10^-7[/tex] C.

A charge is a property of matter that results from the presence or absence of electrons. It can be either positive or negative, and two objects with opposite charges will be attracted to each other, while two objects with the same charge will repel each other. The unit of charge is the Coulomb (C), which is defined as the amount of charge carried by 6.242 x 10^18 electrons. The concept of charge is important in many areas of physics, including electricity and magnetism, and plays a role in many natural phenomena and technological applications.

The charge on object A is [tex]-1.6 X10^-13[/tex]C.

When two million electrons are removed from object A, the charge on object A becomes more negative. The charge on object A can be calculated using the formula:

Q = Q - ne,

where Q is the original charge, n is the number of electrons, and e is the charge of an electron, which is -1.6 x 10^-19 C.

Therefore, the charge on object A becomes:

[tex]Q = -1.6 X 10^-13 C - (2X10^6)(-1.6X 10^-19 C)[/tex]

[tex]= -1.6 X 10^-13 C + 3.2X 10^-7 C[/tex]

= 1.6 x 10^-7 C

Object B starts as electrically neutral, which means that the total charge on B is 0 C. When two million electrons are placed on object B, the charge on object B becomes more negative. The charge on object B can be calculated using the formula:

Q = Q + ne,

where Q is the original charge, n is the number of electrons, and e is the charge of an electron, which is -1.6 x 10^-19 C.

Therefore, the charge on object B becomes:

Q = 0 C + (2 x 10^6)(-1.6 x 10^-19 C)

[tex]= -3.2 X 10^-7 C.[/tex]

So, the resulting charge on A is[tex]1.6 X 10^-7[/tex]C, and the resulting charge on B is [tex]-3.2X 10^-7[/tex] C.

To know more about electrons visit:

brainly.com/question/17066934

#SPJ1

Yes, the student conducted an experiment in which an elastic collision occurred. The system of block x and block y is a closed system.

What is closed system?

A closed system is a system where the components are isolated from the environment. This type of system does not allow any kind of exchange of energy, matter, or information with the environment.

This means that the system is in a state of equilibrium, where the total energy and matter is conserved, and the system is not affected by any external influences.

Therefore, Yes, the student conducted an experiment in which an elastic collision occurred. The system of block x and block y is a closed system.

To learn more about elastic collision

https://brainly.com/question/1400730

#SPJ4

The required concentration (in percent by mass) for an aqueous ethylene glycol (C2H6O2) solution is 51 %.

A helpful industrial substance called ethylene glycol can be found in a variety of consumer goods. Antifreeze, some stamp pad inks, ballpoint pens, solvents, paints, plastics, films, and cosmetics are a few examples. It may also serve as a delivery system for drugs.

Because of its pleasant flavor, ethanol is frequently consumed intentionally or by mistake. In the body, ethylene glycol decomposes into harmful substances.

The central nervous system (CNS), followed by the heart and kidneys, are the first organs that are impacted by ethylene glycol and its harmful byproducts.

Therefore, The required concentration (in percent by mass) for an aqueous ethylene glycol (C2H6O2) solution is 51 %.

To learn more about Ethylene glycol, refer to the link:

https://brainly.com/question/30530800

#SPJ6