you are going to an outdoor concert, and you'll be standing near a speaker that emits 51 w of acoustic power as a spherical wave. what minimum distance should you be from the speaker to keep the sound intensity level below 94 db ?

When doing the free stroke, the arms alternate movements. While the other arm extends forward and pulls towards the hip underwater.

Generally speaking, movement is the act of shifting one's position from The act of moving, a change in position or posture, the transferring of a situation from one to another using any method, natural or proper motion, progress, or progression. Examples include the motion of an army while marching or the motion of a wheels or a machine.

Motion is the gradual change in an object's position over time. Movement, distance, velocity, acceleration, time, and speed are all used to define motion. Motion is the modification of position.

To know more about movement visit :

https://brainly.com/question/2856566

#SPJ4

Fire detection pull stations are referred to as "manual fire alarm boxes" in NFPA 72.The code stipulates that a specific floor's closest pull station shall be no and over 200 feet away.

NFPA 1, Fire Code, makes numerous references to NFPA 72.The principal section of the Code governing detection, alarm, & communication systems is 13.7.

Pathway resiliency In accordance to NFPA 13, Level 1 shall include any connecting wires, cables, or even other physical paths that are properly covered by an automated sprinkler system, as well as any such pathways that are covered by metal wire harnesses or metal-armored cables.

To know more about fire alarm boxes visit:

https://brainly.com/question/7283857

#SPJ4

With such a pace of 133 miles per hour, Jarno Trulli won the pole position for the U.S. Main Event Race in 2005. How fast was he moving, in cm/s  inches x 10 S Jarno Trulli has been the pole winner in 2005.

What makes position crucial in physics?

Position is a crucial piece of knowledge in physics because many motion equations depend on it. A location is precisely defined in physics as a place of origin or being. It is typically shown as an x-y axis diagram. The origin of something is where it first began.

What is the formula for positions?

The position formula is shown as. Whereas the body's initial location is x 1, its final position upon dislocation is x 2. When a shift in position occurs, the displacement changes at a rate of x.

To know more about position visit:

https://brainly.com/question/7130792

#SPJ4

The strength of the electric field is strongest when the lines are close together and weakest when they are far apart.

The electric field is the region of space around an electrically charged particle or object where the charge body feels force. Examples: -Electric fields are created by charges and their configurations, such as capacitors and battery cells.

The force per charge applied to the test charge can be used to determine the electric field's strength. Its definition gives birth to the common metric units for electric field strength.

It is assumed that the field's direction corresponds to the force it would apply to a positive test charge. With a positive point charge, the electric field radiates outward, and from a negative point charge, it radiates in.

Therefore, The units of an electric field would be force units divided by charge units, as an electric field is defined as a force per charge.

Learn more about magnitude here:

https://brainly.com/question/28561944

#SPJ4

The heat energy is transferred to or from the gas is 1.73 Joule. The result is obtained by using the heat energy formula in isothermal process.

In isothermal process, where the temperature is constant, the internal energy also does not change.

ΔU = Q - W = 0

It makes

Q = W

W = nRT ln (V₂/v₁)

Where

We have a monoatomic ideal gas undergoes an isothermal expansion.

Find the heat energy transferred to or from the gas!

Since it is in isothermal process, the heat energy transferred is

Q = W

Q = nRT ln (V₂/v₁)

Q = 1(8,31)(300) ln (0.040/0.020)

Q = 2.493 ln 2

Q = 1.73 Joule

Hence, the transferred energy in the isothermal process is 1.73 Joule.

Learn more about thermodynamic processes here:

brainly.com/question/30393982

#SPJ4

The mass which when hung at the 85cm mark will balance the ruler horizontally​ is  600 g.

The mass which when hung at the 85cm mark will balance the ruler horizontally​ is calculated as follows;

( 150 g x 60 cm ) = ( 85 cm - 60 cm) m

( 150 g x 60 cm ) = ( 15 cm) m

where;

The mass which when hung at the 85cm mark is calculated as

m = ( 150 g x 60 cm ) / ( 15 cm )

m = 600 g

Learn more about uniform meter rule here: https://brainly.com/question/29289946

#SPJ1

In summary, the observations about determining ages of rocks and fossils are based on scientific principles such as radioactive decay, superposition, and original horizontality.

A scientific principle is a fundamental concept or law that explains how the natural world works. It is a statement based on empirical evidence and repeated observations that is widely accepted by the scientific community as a fundamental truth. Scientific principles provide a framework for understanding and explaining natural phenomena, and they form the basis for scientific research and discovery.

Examples of scientific principles include:

The law of conservation of energy, which states that energy cannot be created or destroyed, only transformed from one form to another.

The theory of evolution, which explains how species change over time through natural selection and genetic variation.

The law of gravity, which explains the attraction between objects with mass and their impact on space-time.

The principle of relativity, which explains how the laws of physics are the same for all observers in uniform motion relative to each other.

Scientific principles are subject to change and refinement as new evidence and discoveries are made, but they provide a reliable foundation for scientific inquiry and understanding.

Here,

1. Observations about determining ages of rocks and fossils:

Scientists use a variety of methods to determine the ages of rocks and fossils, such as radiometric dating, relative dating, and stratigraphy.

Radiometric dating involves measuring the decay of radioactive isotopes in rocks or fossils, which provides an estimate of the time elapsed since the material was last heated or exposed to sunlight.

Relative dating involves comparing the ages of rocks or fossils based on their position in relation to one another.

Stratigraphy involves studying the layers of rock or sedimentary deposits to determine the relative ages of the materials.

2. Explanation based on scientific principles:

Radiometric dating is based on the principle of radioactive decay, which is the spontaneous breakdown of atomic nuclei into smaller particles over time. The rate of decay is constant, which allows scientists to use the amount of remaining radioactive material to estimate the time elapsed since the material was last heated or exposed to sunlight.

Relative dating is based on the principle of superposition, which states that the oldest rocks or fossils are found at the bottom of a sequence, while the youngest rocks or fossils are found at the top. By comparing the ages of rocks or fossils in different layers, scientists can determine their relative ages.

Stratigraphy is based on the principle of original horizontality, which states that sedimentary layers are deposited in horizontal layers. By studying the layers of rock or sedimentary deposits, scientists can determine the relative ages of the materials based on their position.

To know more about scientific principle,

https://brainly.com/question/24666197

#SPJ1

Answer:

Below

Explanation:

The block does not slide, so the force of friction equals the down the slope force.  Ff = 26 n     the Fn  is given as 42 N

Definition of  static coefficient of friction =  Ff/Fn = 26/42 = .62

If two spring-mass systems that are similar to one another are permitted to oscillate, system a will oscillate vertically while system b will oscillate horizontally. System A has the highest possible maximum velocity.

It is possible for a spring-mass system to oscillate vertically. T denotes the duration of the oscillation. The system is then launched into a low orbit around the earth. The total energy is the sum of the kinetic and potential energies because there are no dissipative forces in the SHM of the mass and spring system.

A mass hung on a spring will oscillate after being shifted. The period of the oscillation depends on the mass and stiffness of the spring. Data logging is used in this experiment to investigate the period, displacement, velocity, and acceleration of the output from a motion sensor.

To know more about spring:

https://brainly.com/question/15240611

#SPJ4

The reaction to the force in Part A is a force of magnitude 5 N exerted on the earth by the book. Its direction is upward.

Force may be characterized as a process involving pushing or pulling upon an object that significantly results from the object's interaction with another object. Whenever an interaction between two things, takes place, there is a force upon each of the entities.

According to the context of this question, the direction of the force on the first object is opposite to the direction of the force on the second object. Forces always come in pairs like equal and opposite action-reaction force pairs.

Therefore, the reaction to the force in Part A is a force of magnitude 5 N exerted on the earth by the book. Its direction is upward.

To learn more about Force, refer to the link:

https://brainly.com/question/12785175

#SPJ1

"The principle that explains the scattering of shortwave radiation and accounts for earth's blue sky is rayleigh scattering."

Rayleigh scattering is the scattering of light by particles available in the atmosphere. According to Rayleigh's scattering law, the quantity of scattering of the light is inversely proportional to the fourth power of the wavelength.

As the wavelength of light falls, Rayleigh scattering, caused by these tiny air molecules, increases. The wavelengths of violet and blue light are the shortest, whereas red light has the longest. The sky appears blue during the day because blue light is scattered more than red light.

The theory of Rayleigh scattering can be used to explain how air molecules, tiny particles, microwave radiation from clouds, and raindrops scatter UV and visible light.

To know more about scattering:

https://brainly.com/question/10654521

#SPJ4

One energy law which is known as the Law of Conservation of Energy states that energy cannot be created or destroyed; it can only be transformed from one form to another.

This law is known as the Law of Conservation of Energy. The Law of Conservation of Energy is a fundamental concept in physics that states that energy cannot be created or destroyed, but it can only be transformed from one form to another. This means that the total amount of energy in a closed system remains constant over time, even though the energy may change form. For example, the energy from a moving object can be transformed into heat when it collides with a surface, or the energy from a chemical reaction can be transformed into electrical energy in a battery. The law of conservation of energy is one of the most important principles in physics and underlies many natural processes and technologies.

Learn more about  Law of Conservation of Energy here

https://brainly.com/question/23590186

#SPJ4

The material composition of the wheel can affect its density and hence its mass, but it does not directly affect the rotational inertia. However, the strength and other material properties of the wheel can indirectly affect the rotational inertia by affecting the thickness and shape of the wheel.

What is the rotation?

Rotation is the process of turning an object around a fixed point or axis. This can refer to physical objects, where the object is rotated on the ground or an axis, or in the case of a 3D object, it can refer to the object's orientation in space. The rotation can be in any direction, either clockwise or counterclockwise.. In addition, rotation can be used to describe the movement of a mathematical equation or graph around a point or axis.

The rotational inertia of a wheel about its axle does not depend upon its mass distribution or speed of rotation.

The rotational inertia (also called moment of inertia) of a wheel depends only on its mass, diameter, and the way its mass is distributed around its circumference. Specifically, the rotational inertia of a wheel is proportional to the square of its radius and the mass of the wheel. The distribution of mass around the circumference affects the way the mass is concentrated with respect to the axis of rotation, but does not affect the total rotational inertia.

The material composition of the wheel can affect its density and hence its mass, but it does not directly affect the rotational inertia. However, the strength and other material properties of the wheel can indirectly affect the rotational inertia by affecting the thickness and shape of the wheel.

To learn more about rotation from given link

brainly.com/question/30300898

#SPJ4

The pressure put on the ground by trains has decreased by a ratio of 62.5.

The n + x is used to represent sleeper density. The number of sleepers needed for one rail length is shown by the symbol n + x in this case. A rail's length is given by n. The necessary number of sleepers is 17 13 multiplied by 1000, which comes to 1307.69 x 1308 Numbers.

It is the quantity of sleepers necessary to support a rail-length of railroad track. Its formula is (n + x), where n is the length of a rail in meters and x is a constant with a range of 3 to 6 (the length of a rail for broad gauge (B.G.) track is 13 meters, while that for meter gauge (M.G.) track is 12 meters).

2.5 * 25 = 62.5.

To learn more about pressure refer to:

https://brainly.com/question/28012687

#SPJ1

Gas is poured into a cylinder that is 6.3 cm high and 5.3 cm wide, and a steady force is used to push the piston downward. If the gas pressure is 465 kPa, determine the force acting on the piston.

What distinguishes a steady flow from an irregular flow?

The two main types of flow are steady flow and unstable flow. The speed at a given site must not change over time for constant flow to occur. Or to put it in another way, v t = 0. However, as time passes, the unstable flow's velocity will alter. Because of this, it is typically significantly harder to examine a situation where unstable flow is present.

What does stable flight mean?

A specific instance of flight dynamics is known as steady flight, one after flight, or equilibrium flight, where the aircraft's horizontal and vertical velocities are stable in a body-fixed region of space. Stable flight maneuvers can be used to represent simple aircraft maneuvers including straight and level, climb and descents, and planned rotations.

To know more about steady force visit:

https://brainly.com/question/17941324

#SPJ4

A lion can produce a roar with a sound intensity level of 114 db at a distance of 1.00 m . The intensity level at 4 m from the lion is 16 DB.

The decibel, or dB, is widely used to measure sound levels even though it is a measurement of pressure rather than sound. A decibel is a logarithmic unit used to indicate the relationship between a physical quantity and a reference level.

The square of the distance and the decibel intensity are inversely related.

I₂ = D₁²

I₁    D₂²

The sound intensity  level at one meter is 114 dB.

I₂ =   1²

114   4²

I₂ = 16 Db

To know more about the intensity level, here

brainly.com/question/16343920

#SPJ4

As for the formula, yr=yc +(I/(A*yc)), is to find the force acting on a vertical plate (plate perpendicular to the surface of the water)

Assume a flat plate is present in a tank of water, at a depth of h from the water's surface, and that the plate is parallel to the water's surface.

The force acting on the plate will be equal to the weight of the water present above it.

The volume of the water present above it is A*h, where A is the area of the flat plate and h is depth.

kg/m3 is the density of water in rho.

rho*h*A gives the mass of the water above the plate.

Thus by multiplying g, we get the weight of the water above the plate.

In the above experiment, the force acting on the quadrant is balanced by slotted weights and you will be able to obtain the force.It would have been better if you had showed the simplified diagram.

Learn more about Surface here:

https://brainly.com/question/28267043

#SPJ4

Alec put 4 fins on each rocket.

Alec has a total of 14 fins to put on 3 rockets. To find out how many fins he puts on each rocket, we can divide the total number of fins by the number of rockets:

14 fins ÷ 3 rockets = 4 with 2 left over

Since he uses as many fins as he can on each rocket, he must put 4 fins on each of two rockets and 6 fins on the third rocket (for a total of 4+4+6 = 14 fins).

Thus, Alec puts 4 fins on each rocket.

More on word problems can be found here: https://brainly.com/question/2610134

#SPJ1

The driver of the van will hear a higher pitch due to his higher relative velocity.

The relative velocity of an object is the velocity of the object with respect to a stationary observer.

If a fire engine is moving at 40 m/s and sounding its horn. Also if  A car in front of the fire engine is moving at 30 m/s, and a van in front of the car is stationary.

The relative velocity of the stationary van is calculated as;

Vv = -40m/s - 30 m/s = - 70 m/s

The driver of the van will hear a higher pitch since his combined relative velocity of both cars is 70 m/s.

Learn more about relative velocity here: https://brainly.com/question/17228388

#SPJ1

Information given are: L=65cm =0.65m, f=196Hz, a v=?, Wavelength by: λ=2L, When we put known values into the previous equation we get: λ=2⋅0.650m = 1.30m, And speed is given by: v=λf, v=1.30m⋅196Hz, Finally: a v = 255 m/s, b., f2​=392Hz, f3=588 Hz.

AI's Preferred Response:You need to know the object's length and frequency in order to compute the wavelength of an object that is vibrating.The frequency in this instance is 60 Hz, and the length was 60 cm.This wave has a 2.4 cm wavelength.

How can I determine frequency?

For the given string, L = 65.0 cm = 0.65 m and v = 254.8 m/s. The next two higher resonant frequencies can be calculated as:

f_2 = 2(v/2L) = (2)(254.8 m/s)/(2)(0.65 m) = 196.0 Hz x 2 = 392 Hz

f_3 = 3(v/2L) = (3)(254.8 m/s)/(2)(0.65 m) = 196.0 Hz x 3 = 588 Hz

To know more about Wavelength visit:

brainly.com/question/29398067

#SPJ4

On the surface of Mars, the gravitational field strength is roughly [tex]3.71 m/s^2.[/tex]

The influence that a large body has on the space surrounding it, exerting force on another large body, is described by the gravitational field. The following formula can be used to determine the strength of the gravitational field (g) on the surface of a planet:

g = [tex]\frac {GM}{ r^2}[/tex]

where G is the gravitational constant [tex]6.67 \times 10^{-11} Nm^2/kg^2[/tex], M is the mass of the planet, and r is the radius of the planet.

Plugging in the values for Mars:

g =  [tex]6.67 \times 10^{-11} Nm^2/kg^2[/tex] x [tex]\frac{(6.37 \times 10^23 kg)}{(3.43 \times 10^6 m)^2}[/tex]

g= [tex]3.71 m/s^2.[/tex]

Consequently, the strength of the gravitational field on the surface of Mars is about. [tex]3.71 m/s^2.[/tex]

Learn more about gravitational field

brainly.com/question/12324569

#SPJ4

The image is inverted compared to the object, which means it is a real image.

To draw the ray diagram,

Draw the principal axis and mark the optical center of the lens.

Draw a vertical line to represent the object, and place it 3.1 cm to the left of the lens.

Draw two rays from the top and bottom of the object, parallel to the principal axis, and refract them through the lens so that they converge at a point on the principal axis.

Draw a third ray from the top of the object, passing through the focal point of the lens, and refract it so that it becomes parallel to the principal axis.

Where the refracted rays intersect is the location of the image. Draw the image as a vertical arrow on the opposite side of the lens to the object.

Based on the diagram, we can see that the image is located on the opposite side of the lens to the object, and is smaller than the object.

To know more about the converging lens, here
brainly.com/question/28348284
#SPJ4

The car that slows down to 20 m/s stopped 50 meters away. Assume a slowness is always present. The friction coefficients for static and dynamic surfaces are 0.5 and 0.03, respectively and the coefficient of kinetic friction is 0.203.

an amount or signal that increases a quantity or signal

Three is employed to measure some attribute as both the exponent to x in the expression 3x.

In addition to other sorts of numbers, coefficients can always be fractions, whole numbers, positive, negative, irrational, and more. Deleterious coefficients include those with negative values, to put it simply. Any negative integer, such as -8 in the formula -8z or -11 in the expression -11xy, can be a negative coefficient.

To know more about coefficients visit:

brainly.com/question/28975079

#SPJ4

At point 1 has more energy. The pipe's narrowest section has the lowest velocity, while its broadest section has the lowest pressure.

Fluid molecules were able to exert greater pressure as the velocity lowers than when they're traveling swiftly, when some of their pressure may be partially dissipated toward their motion or velocity. As a result, the pressure is highest where the pipe is the broadest and the velocity of the fluid is lowest.

Water velocity and pipe diameter are interdependent in a water-flowing pipeline. The pressure inside a pipe will inevitably increase as its diameter lowers. According to the scientific method, the area for conveyance can be lowered in order to lower pressure.

To know more about energy visit:

brainly.com/question/2409175

#SPJ4

A mechanical wave is a vibration of matter, a wave responsible for the transmission of energy through a medium.

His four examples of mechanical waves?

Creeping waves, water waves, stadium waves, and jump rope waves are other examples of mechanical waves. Everyone needs a medium to exist. A Slinky wave requires a Slinky turn. Water waves needs the water. Stadium waves need stadium fans. A jump rope wave requires a jump rope.

What are the sources of mechanical waves?

Mechanical waves are created by interactions between adjacent particles in a medium. This interaction transfers energy and momentum from one particle to the next, and the net effect is to pass these quantities from the source to the receiver.

What is important in mechanical waves?

A mechanical wave is a wave that requires a medium to carry energy from one place to another. Mechanical waves cannot travel through particle-free regions of space because they rely on particle interactions for energy transport.

To know more about Mechanical Waves visit here:

https://brainly.com/question/3001269

#SPJ4

The individual coils of the medium will be moved above and downwards as the energy moves from left to right. The movement of the medium's particles is opposite to the direction of the pulse.

The particles slow down as they go upward or downward towards the wave crest or trough, respectively, from their normal position. This indicates that kinetic energy has been partially transformed into potential energy.

Many people believe that water waves force water in one direction and then push it in another. However, in practise, the water vapour tends to concentrate in one place.

To know more about energy visit:-

https://brainly.com/question/1932868?

#SPJ4

The required coefficient of kinetic friction between the puck and the ice is calculated to be 0.15.

The initial speed v₀ = 6.7 m/s

Displacement s = 15.356 m

From the equations of motion:

v² - u² = 2 a s

where,

v is the final velocity

u is initial velocity

a is acceleration

s is displacement

Making a as subject,

a = (v² - u²)/2s = (0 - 6.7²)/(2×15.356) = -44.89/30.712 = -1.46 m/s²

The formula for friction is known to be,

F = - μ N (Negative sign indicates the friction is opposite to motion)

where,

N is normal reaction force (N = m g)

μ is coefficient of kinetic friction

m a = - μ m g

a = - μ g

So, μ = -a/g = 1.46/9.8 = 0.15

Thus, the coefficient of kinetic friction between the puck and the ice is calculated to be 0.15.

To know more about friction:

https://brainly.com/question/15243023

#SPJ4

The maximum speed of the wind-up toy is 9.33 m/s.

To find the maximum speed of the toy, we need to find the first derivative of the position function and then find the maximum value of that derivative. The first derivative of x(t) is:

dx/dt = 2t(1 + 7t - 12t^2 + 5t^3) + t^2(7 - 24t + 15t^2)

Next, we need to find the maximum value of this derivative function over the given domain. To do this, we can set the derivative equal to zero and solve for t, then check the values of the derivative at those points to see if they correspond to a maximum or minimum.

Setting the derivative equal to zero:

0 = 2t(1 + 7t - 12t^2 + 5t^3) + t^2(7 - 24t + 15t^2)

Solving for t, we find that t = 0 and t = 1/3. These two values correspond to the minimum and maximum speeds of the toy, respectively.

Finally, we can evaluate the derivative at t = 1/3 to find the maximum speed:

dx/dt = 2(1/3)(1 + 7(1/3) - 12(1/3)^2 + 5(1/3)^3) + (1/3)^2(7 - 24(1/3) + 15(1/3)^2)

Evaluating the expression, we get:

dx/dt = 2(1/3)(1 + 7(1/3) - 12(1/3)^2 + 5(1/3)^3) + (1/3)^2(7 - 24(1/3) + 15(1/3)^2)

= 2(1/3)(1 + 7(1/3) - 12(1/3)^2 + 5(1/3)^3) + (1/3)^2(7 - 8 + 5)

= 2(1/3)(1 + 7/3 - 4 + 5/3) + (1/3)^2(12)

= 2(1/3)(12/3) + (1/3)^2(12)

= 24/3 + 4/3

= 28/3

The maximum speed of the wind-up toy is approximately 3.72 m/s.

Learn more about speed here:

https://brainly.com/question/13943409

The complete question is:

The position of a wind-up toy is given by: x(t)= t^2(1+7t-12t^2+5t^3) over the domain of {0s < t < 1s}, where x is in m, and t is in s. what is the maximum speed of the toy?

#SPJ4

The drift speed of the electrons in the aluminum wire is 9.32 x 10¹⁹ meters per second.

The drift speed of electrons in a wire can be calculated using the equation:

drift speed = current / (charge density x cross-sectional area)

where charge density is the number of charges per unit volume and is given by:

charge density = current / (number of electrons per atom x drift speed x cross-sectional area)

Since each aluminum atom supplies one conduction electron per atom, the number of electrons per atom is equal to Avogadro's number (NA) and can be calculated as follows:

number of electrons per atom = NA = 6.022 x 10²³ atoms/mol

The number of moles of aluminum in the wire can be calculated using the density and the cross-sectional area:

number of moles = mass / (density x molar mass)

where mass = volume x density and volume = cross-sectional area x length

mass = cross-sectional area x length x density

number of moles = cross-sectional area x length x density / (density x molar mass)

= cross-sectional area x length / molar mass

Finally, the charge density can be calculated:

charge density = current / (number of electrons per atom x drift speed x cross-sectional area)

= current / (NA x drift speed x cross-sectional area)

Substituting this into the equation for drift speed:

drift speed = current / (charge density x cross-sectional area)

= current / (current / (NA x drift speed x cross-sectional area) x cross-sectional area)

= NA x drift speed / current

So, we have a simple equation:

drift speed = NA / current = 6.022 x 10²³ atoms/mol / 6.50 A

drift speed = 9.32 x 10¹⁹ m/s

So, the drift speed of the electrons in the aluminum wire is 9.32 x 10¹⁹ meters per second.

To know more about drift speed please refer:

https://brainly.com/question/15398174

#SPJ4

The magnitude of total momentum of the two-puck system is 7.0 kg m/s.

The total momentum of the two-puck system before the collision is the vector sum of the momentum of each puck. The momentum of each puck can be found using the equation:

p = mv, where m is the mass and v is the velocity.

The momentum of the 1.5 kg puck is:

p1 = m1 * v1 = 1.5 kg * 2.0 m/s = 3.0 kg m/s

The momentum of the 4.0 kg puck is:

p2 = m2 * v2 = 4.0 kg * 1.0 m/s = 4.0 kg m/s

The total momentum of the two-puck system before the collision is:

p_before = p1 + p2 = 3.0 kg m/s + 4.0 kg m/s = 7.0 kg m/s

Since the collision is elastic (no friction), the total momentum of the two-puck system after the collision will be the same as before the collision, meaning the magnitude of the total momentum after the collision will be 7.0 kg m/s.

Read more about Collision:

https://brainly.com/question/15190978

#SPJ4