Yellow lines in the absorption spectrum of mercury vapor correspond to photons with an energy of about 2 eV, it is concluded that the electron energy levels in mercury atoms are such that there must be energy levels with a difference of about 2 eV, which is in option B.
What is the absorption spectrum?Yellow lines in the absorption spectrum of mercury vapor correspond to photons with an energy of about 2 eV, which indicates that the electrons in the mercury atoms are absorbing photons with an energy equal to the energy difference between two energy levels in the atoms.
Hence, it is concluded that the electron energy levels in mercury atoms are such that there must be energy levels with a difference of about 2 eV, which is in option B.
Learn more about the absorption spectrum here.
https://brainly.com/question/14282264
#SPJ1
Which one of the following best defines the notion of "the P-value of a hypothesis test?"
The best definition for the notion of "the P-value of a hypothesis test" is "The probability of obtaining a test statistic at least as extreme as the one you calculated, assuming the null hypothesis is true."
The P-value is a measure of the evidence against the null hypothesis. A low P-value (typically less than 0.05) suggests that the observed data is unlikely to have occurred by chance if the null hypothesis is true, and provides strong evidence against the null hypothesis.
On the other hand, a high P-value (greater than 0.05) indicates weak evidence against the null hypothesis, and supports the conclusion that the null hypothesis is not significantly different from the alternative hypothesis.
"
Complete question is
Which one of the following best defines the notion of "the P-value of a hypothesis test?"
The probability of a type I error.
The probability of a type II error.
The probability of rejecting LaTeX: H_0 H 0 , whether it's true or not.
The probability of obtaining a test statistic at least as extreme as the one you calculated, assuming the null hypothesis is true.
"
You can learn more about P-value of a hypothesis test at
https://brainly.com/question/14189134
#SPJ4
What is VLSI used for?
VLSI has applications in multiple electronic devices such as digital camera and other gadgets.
VLSI is the abbreviation for Verly large scale integration. It is a technology which is utilised to develop parts of electronic devices such as chips or microprocessors.
The technology aids development of multiple chips on a single chip yielding efficient component occupying less space. The application of VLSI is visible in safety systems, chips in graphic card or phone, medical electronic systems and embedded processors.
Learn more about VLSI -
https://brainly.com/question/14417084
#SPJ4
An experienced scientist has carefully plotted the position of the epicenter of an earthquake using data from 5 seismic laboratories but the circles doe not all meet at a single point. The most logical explanation why this might be is
a. Human error
b. Not all stations are detecting the same earthquake
c. The seismic waves graph does not apply to all the seismic wave paths equally
d. The times on the clocks for the seismographs are not accurately set
Answer:
d. The times on the clocks for the seismographs are not accurately set
Explanation:
suppose that a motorboat is moving at ft/s when its motor suddenly quits, and that s later the boat has slowed to ft/s. assume that the resistance it encounters while coasting is proportional to its velocity, so that dv/dtkv. how far will the boat coast in all?
The boat will cost a total of 287.7 feet.
Using calculus, we can find that the equation for the velocity of the boat at any given time is[tex]v(t) = 90e^(-0.1t)[/tex]. We can then integrate this equation to find the total distance the boat travels while coasting.
Integrating v(t) from t=0 to t=s, where s is the time it takes for the boat to slow to 30 ft/s, we get:
[tex]∫(0 to s) 90e^(-0.1t) dt = 900(-e^(-0.1s) + 1)[/tex]
We know that at s seconds, [tex]v(s) = 30 ft/s[/tex], so we can solve for s:
30 = 90e^(-0.1s)
s ≈ 6.848 seconds
Substituting this value of s into our previous equation, we get:
[tex]900(-e^(-0.1(6.848)) + 1) ≈ 287.7 feet[/tex]
Therefore, the boat will coast a total of 287.7 feet before coming to a complete stop.
Learn more about velocity
brainly.com/question/23855996
#SPJ4
what is thin nonconducting rod with a uniform distribution
A thin nonconducting rod with a uniform distribution is a type of rod that is made of a nonconducting material such as plastic or wood and has a uniform distribution of mass along its length.
This means that the rod is evenly balanced with no areas of concentrated mass or weight. This type of rod is often used in physics experiments and simulations as it allows for accurate measurements and predictable outcomes. The uniform distribution of mass also makes the rod more stable and less likely to wobble or bend under pressure: making it ideal for precise and delicate tasks.
A thin nonconducting rod with a uniform distribution is an important tool in the field of physics and is essential for many experiments and simulations.
Learn more about thin nonconducting rod brainly.com/question/14777040
#SPJ4
An electron moves from point i to point f, in the direction of a uniform electric field. During this motion:.
While traveling from one place to another in a uniform electric field, the electron performs negative work, which raises the electron's potential energy.
What do we mean by uniform electric field ?
There are uniform electric fields between charged plates. The lines of the electric field in the area between the plates would be evenly spaced if positive and negative charged plates were arranged facing one another. The field's strength would remain constant in size. The term "uniform electric field" describes this.
The force that would be acting on a positive charge would be pointed in that direction by the electric field. Due to its negative charge, an electron will flow in the opposite direction of the electric field. The field exerts positive force on the positive charge if it moves in the field's direction. The field performs positive work on the charge if the negative charge moves in the opposite direction of the field. The field exerts negative effort on the negative charge if it moves in the field's direction.
To learn more about electric field use link below:
https://brainly.com/question/14372859
#SPJ4
How does condensation change water state?
Condensation is the process where water vapor becomes liquid and it is the reverse of evaporation where liquid water becomes a vapor.
What is meant by condensation?Condensation happens when the air is cooled to its dew point or it becomes so saturated with water vapor that it cannot hold any more water.
Condensation is the process by which water vapor is changed into liquid water and it's the opposite of evaporation. Condensation is important for the water cycle because it is responsible for the formation of clouds.
Heat is released when vapor condenses. Unless this heat is removed, surface temperature increases until it is equal to that of surrounding vapor.
To know more about condensation, refer
https://brainly.com/question/25796102
#SPJ4
when you whirl a can overhead by a string in a circular path, what is the direction of the force exerted on the can?
The force applied to a can when it is whirled aloft by a string in a circle is in the direction of the circle's centre. The can is kept moving in a circular motion by a force known as the centripetal force.
What is centripetal force?A force that operates on a moving item in a circular motion and is directed toward the centre of the circle is called a centripetal force. It is the force that prevents an object from travelling in a straight line and prohibits it from moving on a curved route.
The following formula can be used to determine the amount of the centripetal force:
[tex]F = m \times a[/tex]
where:
F is the centripetal force,
The object's mass is m, and
The centripetal acceleration, abbreviated a, is the acceleration that points in the direction of the circle's center and may be calculated using the following formula:
[tex]a = v^2 / r[/tex]
where:
v is the velocity of the object, and
r is the radius of the circular path.
The centripetal force always points in the direction of the circle's centre and is inversely proportional to the mass and speed of the item; an object with a higher mass and speed will exert a greater centripetal force.
Therefore, The centripetal force always acts in a radial direction, since its direction is perpendicular to the object's motion.
Learn more about centripetal force here:
https://brainly.com/question/11324711
#SPJ4
Muscular endurance is the amount of force that can be exerted by a single contraction of the muscle.
False: The amount of force that can be exerted by a single muscle contraction determines muscular endurance.
What is muscular endurance?
Different from the notion of strength training, cardiovascular endurance or cardiorespiratory endurance refers to the sort of muscle endurance used during cardiovascular fitness exercises like running, swimming, or cycling.The body's energy systems, muscle fibres, and capillaries are developed by endurance training for these kinds of physical activity, such as marathon running or 100-mile bicycle rides.To know more about muscular endurance, click the link given below:
brainly.com/question/11006931
#SPJ4
3. When the exposed side of the wings are in contact with the paper clips, there is a current flowing through the hoop that induces a magnetic field. Based on your observations, do the magnet and the hoop attract or repel one another when the loop continues to move?
The magnetic effect on moving electric charges, electric currents, and magnetic objects is described by a magnetic field, which is a vector field. A moving charge in a magnetic field feels a force perpendicular to its own motion and to the magnetic field.
What is called magnetic field?The magnetic effect on moving electric charges, electric currents,: ch1 and magnetic objects is described by a magnetic field, which is a vector field. A force perpendicular to the charge's own motion and the magnetic field acts on it when the charge is travelling through a magnetic field. : ch13: 278 The magnetic field of a permanent magnet tugs on ferromagnetic elements like iron and draws or repels other magnets.
Paramagnetism, diamagnetism, and antiferromagnetism are three additional magnetic effects that a nonuniform magnetic field can have on "nonmagnetic" materials, though these forces are typically so minute that they can only be observed by laboratory apparatus.
Learn more about magnetic field
https://brainly.com/question/23096032
#SPJ1
How does voltage cause current to do work?
When there is a voltage difference between two points in a circuit, the electric charge flows from the higher voltage point to the lower voltage point, creating an electric current.
What is the role of voltage in a current?When the electric current flows through a device such as a light bulb, a motor, or a heater, it does work by transforming electrical energy into another form of energy. For example, in a light bulb, the electric current causes the filament to heat up and emit light.
The amount of work that can be done by the electric current depends on the voltage and the resistance of the device. The higher the voltage and the lower the resistance, the greater the current and the more work that can be done.
Learn more on voltage here: https://brainly.com/question/1176850
#SPJ1
How does the movement of air affect the type of weather that forms high pressure and low pressure.
The movement of air is responsible for creating high-pressure and low-pressure systems in the atmosphere. The differences in air pressure result from differences in air temperature, which drive the flow of air and affect the formation of weather patterns.
A high-pressure system is created when air rises and cools, leading to the formation of clouds and precipitation. The sinking air creates an area of high pressure at the surface. Conversely, a low-pressure system forms when air at the surface rises and is replaced by sinking air, creating an area of low pressure. This rising air can lead to the development of clouds and storms.
The movement of air between high and low-pressure systems drives winds and helps distribute heat and moisture around the planet, which in turn affects the formation of weather patterns. The differences in air pressure also play a role in the formation of ocean currents, which help regulate the Earth's climate. By understanding how air movement affects the formation of high and low-pressure systems, we can gain valuable insight into the weather patterns that shape our planet.
Learn more about precipitation
brainly.com/question/20925010
#SPJ4
A 400 n girl standing on a dock exerts a force of 100 n on a 10,000 n sailboat as she pushes it away from the dock. How much force does the sailboat exert on the girl?.
The force that the sailboat exerts on the girl is equal to the force that the girl exerts on the sailboat, which is 100N.
What is force?Fourth is an influence that causes an object to change its motion direction safe or other physical quantities force can be caused by physical contact or they can be created by feels like gravity and magnetism force can also be internal such as the force of fraction tension and compression.
This is known as Newton's Third Law of Motion, which states that for every action, there is an equal and opposite reaction. Therefore, the sailboat will exert a force of 100N on the girl as she pushes it away from the dock.
The magnitude of the force that the girl is exerting on the sailboat is much smaller than the magnitude of the force that the sailboat is exerting on the girl. This is
because the girl has a much smaller mass than the sailboat. Therefore, the acceleration due to the force that the girl is exerting on the sailboat will be much smaller than the acceleration due to the force that the sailboat is exerting on the girl.
To know more about force click-
https://brainly.com/question/12785175
#SPJ4
The gravitational force between two objects can cause them to move. If will had two rubber balls and dropped them, which of the following would affect the gravitational force?
There will not be any effect on rubber balls but if there will be metallic ball then emf will be generated in the ball and its falling speed will be reduced slightly.
What is gravity?Gravity attracts objects with mass to one another. We frequently consider the gravity of the Earth. This force holds the body in place. Any object with mass, on the other hand, has a gravitational effect on all other objects with mass. Gravity is measured by the acceleration it imparts to an object in free fall.
On the Earth's surface, the acceleration in free fall is approximately 9.8 metres (32 feet) per second. So, for every second that an object falls freely, its speed increases by approximately 9.8 metres per second. Gravity is a force that does not make contact with anything. Gravity does not require any contact with the object. Gravity affects all objects, even if they are not in contact with the ground.
To know more about gravity follow
https://brainly.com/question/14283021
#SPJ1
Calculate the kinetic energy of a rock with a mass of 55kg, rolling down a hill that is 27m high, with a velocity of 8m/s.
Kinetic energy of a rock with a mass of 55kg, rolling down a hill that is 27m high, with a velocity of 8m/s is 1760 J
What is kinetic energy?
The energy an object has as a result of motion is known as kinetic energy. A force must be applied to an object in order to accelerate it. Applying a force requires us to do work. After work has been done, energy has been transferred to the object, and the object will be moving with a new constant speed.
Given:
m = 55 kg
v = 8 m/s
KE or kinetic energy of the rock
Formula and solution:
KE = 1/2 mv²
KE = 1/2 (55kg) (8 m/s)²
1/2 of 55kg = 55 ÷ 2 = 27.5kg
8² or 8×8 = 64 m²/s²
KE = (27.5kg) (64 m²/s²)
KE = 1760kg.m²/s²
Hence, 1760kg.m²/s² is a correct answer.
To know more about similar question follow link
https://brainly.com/question/14409375
#SPJ4
A (c) Figure 1 shown below is a diagram of a non-uniform wooden plank, AB, which is 2.0 m long and weighs 1000 N. The plank is supported from a ceiling by two vertical springs, P and Q. The plank is attached at a distance of 0.5 m from each end. C is the centre of gravity as shown in Figure 1. P 0.5 m elek C 0.5 m W = 1000 N Figure 1. Diagram of a non-uniform wooden plank supported by two springs, P and Q. B When the plank is horizontal, the tension in Spring P is 600 N. a. Draw a force diagram showing all the information given in the question and Figure 1. (3 marks) b. Calculate the tension in Spring Q. Show ALL working. (2 marks) c. By taking moments about A, determine the horizontal distance from P to C. (5 marks) d. State why the centre of gravity is located closer to the point P than the point Q. (1 mark)
Answer:
A.) Draw a force diagram showing all the information given in the question and Figure 1:
[Force Diagram]
B.) Calculate the tension in Spring Q. Show ALL working:
Using Newton's Second Law of Motion, the sum of forces in the horizontal direction must equal 0. Therefore, TQ + TP - W = 0
Substituting the values given, TQ + 600N - 1000N = 0
Solving for TQ, TQ = 400N
C.) By taking moments about A, determine the horizontal distance from P to C:
Taking moments about A, we get: TQ x (2-x) - TP x x = 0
Substituting the values given, 400N x (2-x) - 600N x x = 0
Solving for x, x = 2m
Therefore, the horizontal distance from P to C is 2m.
D.) State why the centre of gravity is located closer to the point P than the point Q:
The centre of gravity is located closer to the point P than the point Q because the tension in spring P is greater than the tension in spring Q. The greater the tension in the spring, the more the board will be pulled in that direction, leading to a gravitational centre closer to the higher tension spring.
Why do we need to set the wavelength of a spectrophotometer?
Setting the wavelength of a spectrophotometer allows you to measure the specific absorption or emission spectrum of a sample, which is necessary to determine the concentration of the specific substance of interest in the sample.
Why is setting wavelength needed?
The wavelength of a spectrophotometer is set to match the specific absorption or emission spectrum of the sample being analyzed. Spectrophotometers work by measuring the amount of light that is absorbed or transmitted by a sample, which is dependent on the specific properties of the sample at a given wavelength.
Each substance has its own unique absorption or emission spectrum, which is a plot of the intensity of light absorbed or emitted at different wavelengths. By setting the wavelength of the spectrophotometer to match the specific wavelength of interest, you can determine the specific concentration of the substance in the sample.
For example, in a biochemical application, you may want to determine the concentration of a specific protein in a sample. By setting the wavelength of the spectrophotometer to the maximum absorption wavelength of the protein, you can measure the amount of light absorbed by the protein, which can be used to determine its concentration.
To know more about Spectrophotometer Wavelength, Check out:
https://brainly.com/question/18801845
#SPJ4
.
Which do scientists study to determine air temperature at the time it was formed? Select the two correct answers. (1 point) (Box) Fossilized pollen (Box) air bubbles trapped in ice (Box) tree rings (Box) chemical isotopes in foraminifera shells
Scientists study B: "Air bubbles trapped in ice" and D: "Chemical isotopes in foraminifera shells" in oredr to determine air temperature at the time it was formed.
Scientists can study air bubbles trapped in ice to determine the air temperature at the time it was formed. The air bubbles in the ice provide a record of the atmospheric composition at the time the ice formed, and the isotopic composition of the trapped air can provide information about the temperature at the time of ice formation.
Scientists can also study chemical isotopes in foraminifera shells, which are microscopic marine organisms that have been around for millions of years. By analyzing the isotopic composition of the shells, scientists can infer the temperature of the water in which the foraminifera lived, which in turn can provide information about the temperature of the atmosphere at the time.
You can learn more about air temperature at
https://brainly.com/question/30515082
#SPJ4
At t = 10 s, a particle is moving from left to right with a speed of 5. 0 m/s. At t = 20 s, the particle is moving right to left with a speed of 8. 0 m/s. Assume the particle's acceleration is constant and that to the right is the positive direction.
Given,
At time t = 10 s moving from left to right speed of particle = 5 m/s
at t = 20 s moving from right to left speed of particle is = 8 m/s
a) acceleration
a = v/t
a= -8-5/20-10
a = -1.3 m/s²
b) using equation of motion
v = u + at
5 = u - 1.3 × 10
u = 5 + 13
u = 18 m/s
c) v = u + at
0 = 18 - 1.3t
t = 13.85 s
What is acceleration?
Uniform or constant acceleration is a type of motion where an object's velocity changes by an equal amount during a period of time that is the same length.
To know more about acceleration, click the link given below:
brainly.com/question/14344386
#SPJ4
Copernicus said that the rotation of the Earth on its axis caused the
A daily motions in the heavens. B phases of the Moon.
C retrograde motion of the plantes
D eclipses of the moon
E motion of the sun along the ecliptic
Copernicus said that rotation of the Earth on its axis caused the: A) daily motions in the heavens.
What does Copernicus say about rotation of Earth on its axis?Copernicus held that the Earth is another planet revolving around fixed Sun once a year and turning on its axis once a day. Nicolaus Copernicus detailed his radical theory of Universe in which the Earth, along with other planets rotated around the Sun and his theory took more than a century to become widely accepted.
Copernicus was an astronomer who proposed a heliocentric system, that planets orbit around the Sun and that Earth is a planet which, besides orbiting the Sun annually, turns once daily on its own axis. That very slow changes in the direction of this axis accounts for the precession of the equinoxes.
To know more about rotation of Earth, refer
https://brainly.com/question/30545501
#SPJ4
The four quantum numbers, the principal quantum number (????), the angular momentum quantum number (????), the magnetic quantum number (m????), and the spin quantum number (ms) have strict rules which govern the possible values. Identify all allowable combinations of quantum numbers for an electron. ????=2, ????=0, m????=0, ms=0 ????=5, ????=1, m????=−1, ms=+1/2 ????=4, ????=3, m????=4, ms=−1/2 ????=3, ????=−1, m????=0, ms=+1/2 ????=3, ????=3, m????=−1, ms=−1/2 ????=3, ????=0, m????=0, ms=−1/2
For an electron, the only possible quantum number combinations are
n = 2, l = 0, ml = 0, ms = 0 and n = 5, l = 1, ml = -1, ms = +1/2
The four quantum numbers describe the properties of an electron in an atom. According to the rules of quantum mechanics, each quantum number can take on only certain values, and each combination of quantum numbers corresponds to a unique electron state.
Let's examine each of the given combinations of quantum numbers and determine whether they are allowable for an electron:
1) n = 2, l = 0, ml = 0, ms = 0
This combination of quantum numbers is allowable. The principal quantum number n = 2, which corresponds to the second energy level. The angular momentum quantum number l = 0, which corresponds to an s orbital. The magnetic quantum number ml = 0, which indicates that the electron is in an s orbital with no orbital angular momentum. The spin quantum number ms = 0, which indicates that the electron has zero spin angular momentum.
2) n = 5, l = 1, ml = -1, ms = +1/2
This combination of quantum numbers is allowable. The principal quantum number n = 5, which corresponds to the fifth energy level. The angular momentum quantum number l = 1, which corresponds to a p orbital. The magnetic quantum number ml = -1, which indicates that the electron is in a p orbital with one unit of orbital angular momentum along the z-axis. The spin quantum number ms = +1/2, which indicates that the electron has one-half unit of spin angular momentum along the z-axis.
3) n = 4, l = 3, ml = 4, ms = -1/2
This combination of quantum numbers is not allowable. The angular momentum quantum number l cannot be greater than n - 1, so l = 3 is not allowed for n = 4.
4) n = 3, l = -1, ml = 0, ms = +1/2
This combination of quantum numbers is not allowable. The angular momentum quantum number l must be a non-negative integer less than or equal to n - 1, so l = -1 is not allowed for n = 3.
5) n = 3, l = 3, ml = -1, ms = -1/2
This combination of quantum numbers is not allowable. The angular momentum quantum number l cannot be greater than n - 1, so l = 3 is not allowed for n = 3.
6) n = 3, l = 0, ml = 0, ms = -1/2
This combination of quantum numbers is allowable. The principal quantum number n = 3, which corresponds to the third energy level. The angular momentum quantum number l = 0, which corresponds to an s orbital. The magnetic quantum number ml = 0, which indicates that the electron is in an s orbital with no orbital angular momentum. The spin quantum number ms = -1/2, which indicates that the electron has negative one-half unit of spin angular momentum along the z-axis.
For more such questions on quantum numbers
https://brainly.com/question/2292596
#SPJ4
an electric dipole with a dipole moment of magnitude p is placed at various orientations in an electric field E that is directed to the left.What orientation of the dipole will result in maximum torque directed into the page?
An electric field with intensity ′E′ is applied to an electrical dipole with dipole moment ′p′. The dipole moves into a place where its axis forms an angle with the electric field.
What is the electric field's direction at point p?Justification: Since electric fields are subject to the of superposition, the overall electromagnetic current of a system typically equal to the total of its individual electric fields. Each charge produces an electric field at pixel Value that is equal in size but moves in the opposite direction.
How should a surface be oriented in an electrostatic potential to allow the most flux to pass through it?The flux through a surface is at its maximum when it is horizontal to field (left panels) and the paddock vector is parallel to a vector, A. When a surface is perpendicular to the field (figure 3d), no field lines intersect it and there is no flux through it.
To know more about electrical visit :
https://brainly.com/question/8971780
#SPJ4
A 10m/s
B 12m/s
C 14m/s
D 19m/s
Answer:
C
Explanation:
Apply the uniform acceleration equation [tex]v^{2} = u^{2} +2as[/tex]
v: Final velocity (When the stone reaches its maximum height)
u: Initial velocity (The velocity of the stone at the instance when it is thrown)
a: Acceleration due to gravity
s: Displacement of the stone
Take [tex]v=0m/s[/tex] since the stone is momentarily at rest when it reaches its maximum height.
Take [tex]a = -9.81 m/s^2[/tex], the negative sign indicates the stone is decelerating due to gravity.
Take [tex]s=10m[/tex] as stated in the question.
[tex]0^2=u^2+2(-9.81)(10)[/tex]
[tex]196.2=u^2[/tex]
[tex]u=\sqrt{196.2}[/tex]
[tex]u=14.00714104m/s[/tex]
Therefore, the closest answer is C ([tex]14m/s[/tex])
the nuclei of both 3h and 3he have radii of 1.5×10−15m . with what velocity must the electron be ejected if it is to escape from the nucleus and not fall back?
The velocity required for the electron to escape the nucleus of both 3H and 3He is approximately 2.18 x 10⁶ m/s.
The velocity required for an electron to escape the nucleus can be determined using the concept of the minimum required energy for escape, which is given by the ionization energy of the atom.
The ionization energy, or the energy required to remove an electron from an atom, is given by the formula:
E = (Z² x 13.6 eV) / n²
where E is the ionization energy in electron volts (eV), Z is the atomic number of the atom, and n is the principal quantum number of the electron.
For hydrogen-3 (3H) and helium-3 (3He), Z = 1 since they both have one proton in the nucleus. Thus, the ionization energy for both atoms can be calculated using n = 1 (the electron closest to the nucleus), which gives:
E = (1^2 * 13.6 eV) / 1^2 = 13.6 eV
To determine the required velocity, we can equate the ionization energy to the kinetic energy of the electron:
(1/2)mv² = E
where m is the mass of the electron and v is the velocity of the electron. Substituting the mass of the electron and the ionization energy of the atom, we get:
(1/2)(9.11 x 10⁻¹³ kg)(v²) = (1.36 x 10⁻¹⁸ J)
Solving for v, we get:
v = √[(2E) / m]
= √[(2 x 1.36 x 10^-18 J) / (9.11 x 10⁻³¹ kg)]
= 2.18 x 10⁶ m/s
Therefore, the velocity required for the electron to escape the nucleus of both 3H and 3He is approximately 2.18 x 10^6 m/s.
Learn more about ionization here:
https://brainly.com/question/28385102
#SPJ4
Which phenomena of light is shown in the given diagram? b) The given figure is for blue light, what will be the change in the angle of deviation of red light is used? c) Why is the angle of refraction less than angle of incidence for a glass prism? d) Which light ray is an emergent ray in the following diagram? e) Which colour of light travels fastest through a glass prism? f) How is dispersion different from scattering
The given diagram shows refraction of light. The incident ray is pq and the emergent ray is rs. Due to the higher density of glass than air, the incident angle is greater than the refracted angle.
What is refraction ?Refraction, is the phenomenon of bending of light when it travels from one medium to the other. Here, the diagram shows how light bends when it passes from air to the glass prism.
Here, the incident light is pq and the emergent ray from the prism is rs. If red light is used instead of blue, the angle of deviation will be shorter.
orange -red region will travel through the prism more fastly than the violet -blue colors because , higher wavelength is associated with more speed.
Dispersion of light is the separation of the white light into its component colors, whereas, scattering is the spreading of the same color through out a medium or vacuum
Find more on refraction :
https://brainly.com/question/14760207
#SPJ9
a particle moves in a circle with radius 10 cm and with a uniform speed 1.3 m/s. what is the centripetal acceleration of this particle?
The acceleration that a particle experiences while travelling in a circle is known as centripetal acceleration. It is aimed at the circle's centre and prevents the particle from deviating from its course. The formula yields the centripetal acceleration.
What is centripetal acceleration?When a body moves in a circle, its direction is continually changing, which causes a change in velocity and an acceleration.
[tex]a = v^2 / r[/tex]
The following formula determines the centripetal acceleration of a particle travelling in a circle:
[tex]a = v^2 / r[/tex]
Where r is the circle's radius, v is the particle's uniform speed, and an is the centripetal acceleration.
In this instance, the circle's radius is 10 cm, or 0.1 m, and the particle's speed is 1.3 m/s. Using these numbers as formula inputs.
[tex]a = (1.3 m/s)^2 / (0.1 m)[/tex]
[tex]a = 169 m/s^2[/tex]
Therefore, The centripetal acceleration of the particle is [tex]169 m/s^2.[/tex]
Learn more about acceleration here:
https://brainly.com/question/14465119
#SPJ4
A simple pendulum has a period of 1. 0 s. What is the pendulum length? (g = 9. 8 m/s2).
According to the question: the length of the pendulum is 0.41 m.
What is pendulum?Pendulum is a device consisting of a weight suspended from a pivot so that it can swing freely. It is used as a simple device to measure time, or to demonstrate the effects of gravity in a scientific experiment. Pendulums are also used in clocks and in other devices such as seismographs and gravimeters. The gravitational force on the pendulum causes it to swing back and forth in a regular, repeating cycle.
The period of a simple pendulum is determined by the length of the pendulum and the acceleration due to gravity. This relationship is given by the equation T = 2π√(L/g) where T is the period, L is the length of the pendulum and g is the acceleration due to gravity.
In this case, we know that the period is 1.0 s and the acceleration due to gravity is 9.8 m/s2. Plugging these values into the equation gives us L = (4π2/g) x T2 = (4π2/9.8) x (1.0)2 = 0.41 m.
Therefore, the length of the pendulum is 0.41 m.
To learn more about pendulum
https://brainly.com/question/26524032
#SPJ4
A measured sample of argon gas has a volume of 20. 0 l at a pressure of 660 mm hg. What is the final volume if the pressure is decreased to 550 mmhg?.
Therefore, if the pressure is reduced to 550 mm Hg, the ultimate capacity is 24 liters.
The final volume, if the pressure is lowered to 550 mm Hg, is 24 liters, according to Boyle's law. An experimental gas law known as Boyle's law explains how a gas's pressure declines as its volume rises. The assertion can be summed up as follows: at constant temperature and gas volume, the absolute pressure exerted by a given mass of an ideal gas is inversely proportional to its mass.
It can be expressed as follows mathematically:
PV=K or P x 1/V. For a given mass of gas, the equation asserts that the product of pressure and volume is constant, and the equation is valid as long as
P₁V₁=P₂V₂,
V₂=660×20/550=24 liters.
Learn more about volume Visit: brainly.com/question/1437490
#SPJ4
Why is a direct comparison of station pressures difficult?
a. Station pressures change abruptly over small horizontal distances even when there is no appreciable change in elevation.
b. Weather stations are often at different altitudes
c. Aneroid barometers are extremely inaccurate
d. All of the above
A direct comparison of station pressure difficult because:
a. Station pressures change abruptly over small horizontal distances even when there is no appreciable change in elevation- correct
b. Weather stations are often at different altitudes-partially correct
c. Aneroid barometers are extremely inaccurate- not correct.
What does station pressure mean?Station pressure refers to the atmospheric pressure measured at a particular location or weather station, with the reading not adjusted to sea level. It is sometimes also called "raw pressure" or "absolute pressure."
Atmospheric pressure varies with altitude, so station pressure readings will be affected by the elevation of the location where the reading is taken. This means that the same weather system passing over two different locations at different elevations will produce different station pressure readings, even if the actual atmospheric pressure is the same at both locations.
To make meaningful comparisons of pressure between different locations, meteorologists typically adjust the station pressure readings to a standard sea level pressure using a process called "sea level pressure reduction."
Direct comparison of station pressure is difficult as
Station pressures can change abruptly over small horizontal distances, even when there is no appreciable change in elevation. This is due to the variability of atmospheric pressure caused by differences in temperature, humidity, and wind conditions at different locations. As a result, two weather stations located very close to each other may measure different station pressures due to differences in local weather conditions. This makes it difficult to directly compare station pressures between different locations without taking into account the local weather conditions and other factors that can affect atmospheric pressure.Weather stations located at different altitudes will measure different station pressures due to the influence of altitude on atmospheric pressure. However, this can be addressed through the use of sea level pressure reduction, which adjusts the station pressure to a standard sea level pressure for direct comparison between different locations.whereas,
Aneroid barometers,which are commonly used to measure station pressure, can provide accurate readings when properly calibrated and maintained. In fact, aneroid barometers are often preferred over mercury barometers for measuring atmospheric pressure at weather stations because they are more portable and less prone to breakage.To know more about Station Pressure, visit:
https://brainly.com/question/87231
#SPJ4
what scale predicts the potential threat posed by an asteroid impact?
The most commonly used scale for predicting the potential threat posed by an asteroid impact is the Torino Scale and the more recently developed Palermo Scale.
What is Asteroid ?An asteroid is a small rocky or metallic object that orbits the Sun. Most asteroids are found in the asteroid belt, a region of the solar system between the orbits of Mars and Jupiter. However, some asteroids can have orbits that bring them closer to Earth.
The Torino Scale, which was first introduced in 1999, is a risk assessment scale that uses a range of values from 0 to 10 to quantify the potential impact hazard of a near-Earth object (NEO) such as an asteroid or comet. The Torino Scale takes into account the size, velocity, and proximity of the NEO, as well as the likelihood of impact and the potential consequences.
The Palermo Scale, which was introduced in 2001, is a more sophisticated version of the Torino Scale that uses a probability-based approach to assess the potential impact hazard of a NEO. The Palermo Scale takes into account a wider range of factors, such as the NEO's orbit and the likelihood of impact, and provides a more accurate estimate of the potential threat.
Hence, The most commonly used scale for predicting the potential threat posed by an asteroid impact is the Torino Scale and the more recently developed Palermo Scale.
To know more about asteroid visit :
https://brainly.com/question/2048276
#SPJ4